Related
Hey guys!
For all of us who have the dock. When you open the lid, the screen doesnt turn on. Well i kind of wish it did. So i made it so
Just flash attached zip in recovery and enjoy the benefits of my mod (this is prolly my favorite mod that ive done )
Again, you may donate if you enjoy my work, its very appreciated, however, not expected, just click that thanks button
Tested and confirmed working on CROMI 4.4 (JB 4.2.1) may also work on others. MAKE A BACKUP BEFORE TESTING!!!! I am NOT responsible for bootloops However, if you do test this, and it doesnt work on your device, just attach your ROM you are running, and to make my life easier, attach the android.policy.jar found in /system/framework and i will make it work for you
Btw, i was being lazy, this mod also has advanced power menu with it. i didnt have the time to start from stock file. Now its off to finish writing my five page final!
elesbb said:
Hey guys!
For all of us who have the dock. When you open the lid, the screen doesnt turn on. Well i kind of wish it did. So i made it so
Just flash attached zip in recovery and enjoy the benefits of my mod (this is prolly my favorite mod that ive done )
Again, you may donate if you enjoy my work, its very appreciated, however, not expected, just click that thanks button
Tested and confirmed working on CROMI 4.4 (JB 4.2.1) may also work on others. MAKE A BACKUP BEFORE TESTING!!!! I am NOT responsible for bootloops However, if you do test this, and it doesnt work on your device, just attach your ROM you are running, and to make my life easier, attach the android.policy.jar found in /system/framework and i will make it work for you
Btw, i was being lazy, this mod also has advanced power menu with it. i didnt have the time to start from stock file. Now its off to finish writing my five page final!
Click to expand...
Click to collapse
Sweeet, will be testing this on CROMI-X 4.4.1 after I clean some files off the tab.
Sent from my ASUS Transformer Pad TF300T using Tapatalk HD
macgyver40 said:
Sweeet, will be testing this on CROMI-X 4.4.1 after I clean some files off the tab.
Sent from my ASUS Transformer Pad TF300T using Tapatalk HD
Click to expand...
Click to collapse
Its not working when the device is in deep sleep.
Works if its plugged into the charger though or computer. FML god. well i gotta finish my final first before i delve deeper.
elesbb said:
Its not working when the device is in deep sleep.
Works if its plugged into the charger though or computer. FML god. well i gotta finish my final first before i delve deeper.
Click to expand...
Click to collapse
I feel confident that i fixed it. OP updated. Now i can finally get to my paper. xD I just couldnt leave this unsolved. God i hate when i do this i seriously hope you guys like this xD I'll prolly be up till 1:00 AM finishing my paper yay.
elesbb said:
I feel confident that i fixed it. OP updated. Now i can finally get to my paper. xD I just couldnt leave this unsolved. God i hate when i do this i seriously hope you guys like this xD I'll prolly be up till 1:00 AM finishing my paper yay.
Click to expand...
Click to collapse
will give the new one the test then. Just installed the CTM 1.2 mod for the battery icon mod. also need to update my sig.
Sent from my ASUS Transformer Pad TF300T using Tapatalk HD
Em, where is the download link?
Moe5508 said:
Em, where is the download link?
Click to expand...
Click to collapse
It's hiding
I got all excited, thought it was working, left tablet go for about 15 minutes to ensure it was deep sleeping. Came back opened lid and didn't work :'(
So I have a few more things to try first :3
Sent from my SGH-T999 using Tapatalk 2
Weirdly this just works on my TF700 without any mods. I wonder why?
sbdags said:
Weirdly this just works on my TF700 without any mods. I wonder why?
Click to expand...
Click to collapse
the screen comes on when you open the lid? Like by stock? Can you clear your logcat, then close the lid, wait like a minute, then open it wait a minute, and get the logcat for me?
Sent from my ASUS Transformer Pad TF300T using Tapatalk 2
Does this help?
Code:
ReconcilePopImapAccountsSync: done
[ 05-09 19:30:34.205 30206:30213 D/dalvikvm ]
GC_CONCURRENT freed 326K, 18% free 3455K/4172K, paused 2ms+2ms, total 17ms
[ 05-09 19:30:35.355 30206:30227 D/Email ]
*** synchronizeMailboxGeneric ***
[ 05-09 19:30:35.905 1210: 1929 D/AlarmManager ]
Removed alarm Alarm{42608ef8 type 2 com.android.email} type:ELAPSED_REALTIME_WAKEUP
[ 05-09 19:30:35.905 1210: 1929 D/AlarmManager ]
Added alarm Alarm{415c14d0 type 2 com.android.email} type:ELAPSED_REALTIME_WAKEUP when: After 0h:0m:47.0s
[ 05-09 19:30:37.565 1210: 1245 D/WindowManager ]
notifyLidSwitchChanged, lidOpen:false mHasDockFeature:true mHasKeyboardFeature:true mHasHallSensorFeature:true mLidState:1
[ 05-09 19:30:37.595 1210: 1245 D/WindowManager ]
adjustConfigurationLw, config:{0.0 ?mcc?mnc ?locale ?layoutDir sw901dp w1442dp h853dp 213dpi xlrg land ?uimode ?night finger qwerty/v/v -nav/v} mLidState:0 mHasDockFeature:true mHasKeyboardFeature:true mHasHallSensorFeature:true config.hardKeyboardHidden:1
[ 05-09 19:30:37.595 1210: 1245 I/ActivityManager ]
Config changed: {1.0 ?mcc?mnc en_GB ldltr sw901dp w1442dp h853dp 213dpi xlrg land finger qwerty/v/v -nav/h s.27}
[ 05-09 19:31:09.795 1210: 1245 D/WindowManager ]
notifyLidSwitchChanged, lidOpen:true mHasDockFeature:true mHasKeyboardFeature:true mHasHallSensorFeature:true mLidState:0
[ 05-09 19:31:09.825 1210: 1245 D/WindowManager ]
adjustConfigurationLw, config:{0.0 ?mcc?mnc ?locale ?layoutDir sw901dp w1442dp h853dp 213dpi xlrg land ?uimode ?night finger qwerty/v/v -nav/v} mLidState:1 mHasDockFeature:true mHasKeyboardFeature:true mHasHallSensorFeature:true config.hardKeyboardHidden:1
[ 05-09 19:31:09.835 1210: 1245 I/ActivityManager ]
Config changed: {1.0 ?mcc?mnc en_GB ldltr sw901dp w1442dp h853dp 213dpi xlrg land finger qwerty/v/v -nav/h s.28}
[ 05-09 19:31:09.905 1210: 1225 I/PowerManagerService ]
Waking up from sleep...
[ 05-09 19:31:09.915 1210: 1224 V/Sensors ]
enable - sensor Accelerometer (handle 4) dis -> en
[ 05-09 19:31:09.915 1210: 1224 V/Sensors ]
enabled_sensors: 16 dmp_started: 0
[ 05-09 19:31:09.915 1210: 1224 V/Sensors ]
Starting DMP
[ 05-09 19:31:09.915 1210: 1224 E/ ]
/home/mcaramello/Software/MPL/branch-CAN-4.1.0/mlsdk/mltools/batch/mlsdk-rel-android-src-CONFIDENTIAL/mldmp/mlsupervisor_9axis.c|inv_enable_9x_fusion_legacy|299 returning 1
[ 05-09 19:31:09.915 1210: 1224 E/Sensors ]
Error while trying to enable 9 axis sensor fusion : 1
[ 05-09 19:31:09.935 1210: 1224 I/MPL-mldl_cfg_mpu: ]
inv_mpu_resume(,,,,0070) -> 0070
[ 05-09 19:31:09.935 1210: 1224 V/Sensors ]
setDelay - sensor Accelerometer (handle 4), rate 200 ms (5.00 Hz)
[ 05-09 19:31:09.935 1210: 1224 V/Sensors ]
set fifo rate - divider : 39, delay : 200 ms (5.00 Hz)
[ 05-09 19:31:09.945 1210: 1224 I/MPL-fifo ]
Actual ODR: 25000 mHz
[ 05-09 19:31:09.945 1210: 1224 V/Sensors ]
setDelay - sensor Accelerometer (handle 4), rate 66 ms (15.00 Hz)
[ 05-09 19:31:09.945 1210: 1224 V/Sensors ]
set fifo rate - divider : 13, delay : 66 ms (15.00 Hz)
[ 05-09 19:31:09.965 1210: 1224 I/MPL-fifo ]
Actual ODR: 25000 mHz
[ 05-09 19:31:09.965 1210: 1225 I/WindowManager ]
No lock screen!
[ 05-09 19:31:10.055 1210: 1224 D/WindowManager ]
adjustConfigurationLw, config:{1.0 ?mcc?mnc ?locale ?layoutDir sw901dp w1442dp h853dp 213dpi xlrg land ?uimode ?night finger qwerty/v/v -nav/v} mLidState:1 mHasDockFeature:true mHasKeyboardFeature:true mHasHallSensorFeature:true config.hardKeyboardHidden:1
[ 05-09 19:31:10.085 1210: 1224 W/NvCpuClient ]
Failed to bind to service
[ 05-09 19:31:10.095 1210: 1224 D/Ethernet ]
Connect is not possible because : ETHERNET not ENABLE, sleep can sleep,
[ 05-09 19:31:10.095 1210: 1224 D/WifiService ]
ACTION_SCREEN_ON
[ 05-09 19:31:10.215 1210: 1592 D/PowerManagerService-JNI ]
Excessive delay in autosuspend_disable() while turning screen on: 300ms
[ 05-09 19:31:10.215 132: 316 D/SurfaceFlinger ]
Screen acquired, type=0 flinger=0x410c0358
[ 05-09 19:31:10.215 132: 316 D/hwcomposer ]
hwc_blank: display 0: unblank
[ 05-09 19:31:10.215 132: 316 D/hwcomposer ]
hwc_blank_display: display 0: [1 -> 0]
[ 05-09 19:31:10.215 132: 316 D/hwcomposer ]
Display 0 is 1920 x 1200
[ 05-09 19:31:10.215 132: 316 D/hwcomposer ]
dc_blank: display 0, [1 -> 0]
[ 05-09 19:31:10.225 32579:32583 D/dalvikvm ]
GC_CONCURRENT freed 214K, 13% free 2806K/3208K, paused 2ms+9ms, total 34ms
[ 05-09 19:31:10.225 1840: 1844 D/dalvikvm ]
GC_CONCURRENT freed 386K, 21% free 2910K/3640K, paused 1ms+2ms, total 97ms
[ 05-09 19:31:10.275 1210: 1823 W/InputMethodManagerService ]
Window already focused, ignoring focus gain of: [email protected] [email protected], token = [email protected]
[ 05-09 19:31:10.285 1210: 1223 V/Sensors ]
Changed Polling period to 40ms
[ 05-09 19:31:10.355 1669: 1673 D/dalvikvm ]
GC_CONCURRENT freed 2259K, 47% free 16007K/29780K, paused 6ms+9ms, total 81ms
[ 05-09 19:31:10.355 1210: 1592 D/LightsService ]
Excessive delay setting light: 133ms
[ 05-09 19:31:10.485 1210: 1225 V/KeyguardHostView ]
onDetachedFromWindow = com.android.internal.policy.impl.keyguard.KeyguardHostView{41504618 V.E..... ......ID 0,0-1920,1136 #10202b7 android:id/keyguard_host_view}
[ 05-09 19:31:10.865 1210: 1223 V/Sensors ]
Changed Polling period to 400ms
[ 05-09 19:31:10.985 1210: 1223 V/Sensors ]
Changed Polling period to 40ms
[ 05-09 19:31:11.445 1210: 1223 V/Sensors ]
Changed Polling period to 400ms
Here's hoping you get this working properly. I would love this modification! :highfive:
sbdags said:
Does this help?
Code:
snip
Click to expand...
Click to collapse
Yes it does! This is very intriguing! The TF700 is running a COMPLETELY different line of code then the TF300 is.
You are running your CROMI ROM i presume correct? And all files are the same right? Like if i selected TF700 in the Aroma installer, nothing but the build.prop changes correct?
Sent from my ASUS Transformer Pad TF300T using Tapatalk 2
elesbb said:
Yes it does! This is very intriguing! The TF700 is running a COMPLETELY different line of code then the TF300 is.
You are running your CROMI ROM i presume correct? And all files are the same right? Like if i selected TF700 in the Aroma installer, nothing but the build.prop changes correct?
Sent from my ASUS Transformer Pad TF300T using Tapatalk 2
Click to expand...
Click to collapse
Yes nothing but the TF700 build.prop
sbdags said:
Yes nothing but the TF700 build.prop
Click to expand...
Click to collapse
This is very interesting. Can you post me your model number? Anything that would set your device different from ours. There has got to be some sort of conditional statement making different segments of code run.
Sent from my ASUS Transformer Pad TF300T using Tapatalk 2
elesbb said:
This is very interesting. Can you post me your model number? Anything that would set your device different from ours. There has got to be some sort of conditional statement making different segments of code run.
Sent from my ASUS Transformer Pad TF300T using Tapatalk 2
Click to expand...
Click to collapse
There are differences in the kernels. It's similar I reckon to the way it detects the settings app for the 4.2 launcher. Which model number do you want? It's in the build.prop or do you want a terminal command run?
sbdags said:
There are differences in the kernels. It's similar I reckon to the way it detects the settings app for the 4.2 launcher. Which model number do you want? It's in the build.prop or do you want a terminal command run?
Click to expand...
Click to collapse
Terminal command run. I have already ran the TF700 build.prop and not seen anything different. And i dont see how its in the kernel when i can run pure TF700 kernels and not notice one thing change like missing 4.2 UI option or having the screen come on when i wake the device. Like i said before, there MUST be some sort of conditional statement that checks what the device is. Its just a matter of finding it
Sent from my ASUS Transformer Pad TF300T using Tapatalk 2
Same on my rom on tf201 using the newest tf300 base.
If I open the lid it comes alive. It always has without any mods.
flumpster said:
Same on my rom on tf201 using the newest tf300 base.
If I open the lid it comes alive. It always has without any mods.
Click to expand...
Click to collapse
And that happens if its in deep sleep? Im getting closer, i found where the code is checking what device its on. Wonder why the changed it for the TF300
Sent from my ASUS Transformer Pad TF300T using Tapatalk 2
elesbb said:
And that happens if its in deep sleep? Im getting closer, i found where the code is checking what device its on. Wonder why the changed it for the TF300
Sent from my ASUS Transformer Pad TF300T using Tapatalk 2
Click to expand...
Click to collapse
Not only from deep sleep but the dock will actually turn the prime on from a full power off if you connect it to dock when powered off.
Don't know if it does that for you also.
flumpster said:
Not only from deep sleep but the dock will actually turn the prime on from a full power off if you connect it to dock when powered off.
Don't know if it does that for you also.
Click to expand...
Click to collapse
Never really tried. My tablet is hardly ever off
Sent from my SGH-T999 using Tapatalk 2
Hello all,
I'm trying to get wireless usb devices to work on the Nexus 7 (2013) flo/deb. I've built a kernel with wiress usb device support (ath9k_htc/rtl8187) and added firmware. It's based off the latest CM and devices are being recognized. However, it's not showing up under wlan1. Could anyone help with figuring out where the problem might be? Here are the dmesg logs:
Code:
[ 1456.991302] PM: suspend exit 2013-10-14 19:16:54.020104957 UTC
[ 1456.991363] suspend: exit suspend, ret = 0 (2013-10-14 19:16:54.020196461 UTC)
[ 1457.013336] request_suspend_state: wakeup (3->0) at 1456985326827 (2013-10-14 19:16:54.042153234 UTC)
[ 1457.013488] late_resume: call handlers
[ 1457.025329] [ektf3k]:[elan] elan_ktf3k_ts_resume: enter
[ 1457.026061] [ektf3k]:[elan] dump repsponse: 58
[ 1457.026153] late_resume: done
[ 1457.027709] mipi_dsi_panel_power+, on=1
[ 1457.069061] bq27541_get_psp status: Not charging ret= 0x0101
[ 1457.069915] bq27541_get_psp status: Not charging ret= 0x0101
[ 1457.070770] bq27541_get_psp voltage_now= 4204000 uV
[ 1457.071624] bq27541_get_capacity = 96% ret= 95
[ 1457.072448] bq27541_get_psp temperature= 229 (0.1\xffffffa2XC)
[ 1457.074127] bq27541_get_psp current = -9 mA
[ 1457.076721] bq27541_get_capacity = 96% ret= 95
[ 1457.080841] bq27541_get_psp voltage_now= 4204000 uV
[ 1457.082427] bq27541_get_psp temperature= 229 (0.1\xffffffa2XC)
[ 1457.083343] bq27541_get_psp status: Not charging ret= 0x0101
[ 1457.108123] mipi_dsi_panel_power-
[ 1457.114318] mipi_JDI_lcd_on+
[ 1457.114318] mipi_JDI_lcd_on, JDI display on command+, command bl
[ 1457.148529] gpio_keys: Released KEY_POWER
[ 1457.259948] mipi_JDI_lcd_on, JDI display on command-
[ 1457.259948] mipi_JDI_lcd_on-
[ 1457.273559] EXT_COMMON: hdmi_common_wta_hpd: '1' (unchanged)
[ 1457.285797] mdp4_overlay_mdp_perf_upd mdp clk is changed [1] from 0 to 200000000
[ 1457.378265] mipi_JDI_set_backlight: pwm enable
[ 1457.461456] wlan: [921:E :SME] sme_QosPmcDeviceStateUpdateInd: 7214: nothing to process in PMC state 6
[ 1457.461700] wlan: [1004:E :HDD] hdd_conf_hostarpoffload:
[ 1457.461700]
[ 1473.598663] id_pin_irq_work_function: APQ_OTG_ID_PIN is low : Host mode
[ 1473.600891] msm_otg msm_otg: USB exited from low power mode
[ 1473.613067] vbus_otg is NULL.
[ 1473.714599] smb345_charger: [smb345_otg_status] otg function: on
[ 1473.722991] msm_otg msm_otg: phy_reset: success
[ 1473.723937] smb345_charger: [smb345_inok_isr] VBUS_DET = L
[ 1473.831237] Host mode: Set DC level as 0x61 for deb.
[ 1473.833618] msm_hsusb_host msm_hsusb_host: Qualcomm On-Chip EHCI Host Controller
[ 1473.834045] msm_hsusb_host msm_hsusb_host: new USB bus registered, assigned bus number 2
[ 1473.860137] msm_hsusb_host msm_hsusb_host: irq 132, io mem 0x12500000
[ 1473.879516] msm_hsusb_host msm_hsusb_host: USB 2.0 started, EHCI 1.00
[ 1473.880004] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1473.880371] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1473.880737] usb usb2: Product: Qualcomm On-Chip EHCI Host Controller
[ 1473.880950] usb usb2: Manufacturer: Linux 3.4.0-g56840ae ehci_hcd
[ 1473.881317] usb usb2: SerialNumber: msm_hsusb_host
[ 1473.890472] hub 2-0:1.0: USB hub found
[ 1473.890747] hub 2-0:1.0: 1 port detected
[ 1474.209442] usb 2-1: new high-speed USB device number 2 using msm_hsusb_host
[ 1474.340423] notifying plugin
[ 1474.384582] usb 2-1: New USB device found, idVendor=0cf3, idProduct=9271
[ 1474.384826] usb 2-1: New USB device strings: Mfr=16, Product=32, SerialNumber=48
[ 1474.385162] usb 2-1: Product: USB2.0 WLAN
[ 1474.385375] usb 2-1: Manufacturer: ATHEROS
[ 1474.385711] usb 2-1: SerialNumber: 12345
[ 1494.828704] mipi_JDI_set_backlight: pwm disable
[ 1494.920135] mipi_JDI_lcd_off+
[ 1494.920165] mipi_JDI_lcd_off, JDI display off command+
[ 1495.013153] wlan: [921:E :SME] sme_QosPmcDeviceStateUpdateInd: 7214: nothing to process in PMC state 6
[ 1495.013214] wlan: [1004:E :HDD] hdd_conf_hostarpoffload:
[ 1495.013214]
[ 1495.013214] wlan: [1004:E :HDD] hdd_conf_hostarpoffload: Enabled
[ 1495.013214]
[ 1495.038787] mipi_JDI_lcd_off, JDI display off command-
[ 1495.038787] mipi_JDI_lcd_off-
[ 1495.038818] mipi_dsi_panel_power+, on=0
[ 1495.130493] mipi_dsi_panel_power-
[ 1495.137207] EXT_COMMON: hdmi_common_wta_hpd: '1' (unchanged)
[ 1495.138244] request_suspend_state: sleep (0->3) at 1495109608988 (2013-10-14 19:17:32.166435395 UTC)
[ 1495.138366] early_suspend: call handlers
[ 1495.138488] [ektf3k]:[elan] elan_ktf3k_ts_suspend: enter
[ 1495.139678] active wake lock sns_async_ev_wakelock
[ 1495.139678] PM: Syncing filesystems...
[ 1495.147277] sync done.
[ 1496.337799] suspend: enter suspend
[ 1496.338104] PM: suspend entry 2013-10-14 19:17:33.366295013 UTC
[ 1496.338500] PM: Preparing system for mem sleep
[ 1496.338623] PM: Syncing filesystems...
[ 1496.363891] sync done.
[ 1496.410156] Freezing user space processes ... (elapsed 0.05 seconds) done.
[ 1496.461547] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 1496.481689] PM: Entering mem sleep
[ 1496.481689] Suspending console(s) (use no_console_suspend to debug)
[ 1496.489349] msm_fb_ext_suspend: Turning off HPD circuitry
[ 1496.491088] smb345_suspend+
[ 1496.491088] smb345_suspend-
[ 1496.506896] msm_otg msm_otg: USB in low power mode
[ 1496.507781] PM: suspend of devices complete after 23.498 msecs
[ 1496.508666] PM: late suspend of devices complete after 0.885 msecs
[ 1496.511169] power_suspend_late return 0
[ 1496.511169] PM: noirq suspend of devices complete after 2.471 msecs
[ 1496.511199] Disabling non-boot CPUs ...
[ 1496.511444] msm_pm_enter
[ 1496.511444] msm_pm_enter: power collapse
[ 1496.511444] msm_mpm_irqs_detectable: cannot monitor 000000,00000000,00000000,00000000,00000000,00000020,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000
[ 1496.511444] msm_pm_enter: return
[ 1496.513671] PM: noirq resume of devices complete after 1.556 msecs
[ 1496.515258] wakeup wake lock: alarm_rtc
[ 1496.516204] PM: early resume of devices complete after 0.823 msecs
[ 1496.520080] hub 2-0:1.0: hub_port_status failed (err = -108)
[ 1496.520111] hub 2-0:1.0: cannot disable port 1 (err = -108)
[ 1496.521026] smb345_resume+
[ 1496.521057] smb345_resume-
[ 1496.522003] msm_fb_ext_resume: Turning on HPD circuitry
[ 1496.526336] PM: resume of devices complete after 10.131 msecs
[ 1496.529266] PM: Finishing wakeup.
[ 1496.529266] Restarting tasks ...
[ 1496.538970] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
[ 1496.539184] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 1496.539276] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
[ 1496.539367] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 1496.546356] done.
[ 1496.546569] PM: suspend exit 2013-10-14 19:17:38.023832156 UTC
[ 1496.546661] suspend: exit suspend, ret = 0 (2013-10-14 19:17:38.023923685 UTC)
[ 1496.546783] active wake lock PowerManagerService.WakeLocks
[ 1496.546905] suspend: abort suspend
[ 1496.620147] bq27541_get_psp status: Not charging ret= 0x0101
[ 1496.620819] bq27541_get_psp status: Not charging ret= 0x0101
[ 1496.621887] bq27541_get_psp voltage_now= 4197000 uV
[ 1496.622497] bq27541_get_capacity = 96% ret= 95
[ 1496.623168] bq27541_get_psp temperature= 230 (0.1\xffffffa2XC)
[ 1496.624389] bq27541_get_psp current = -85 mA
[ 1496.626495] bq27541_get_capacity = 96% ret= 95
[ 1496.627227] bq27541_get_psp voltage_now= 4197000 uV
[ 1496.638122] bq27541_get_psp temperature= 230 (0.1\xffffffa2XC)
[ 1496.638915] bq27541_get_psp status: Not charging ret= 0x0101
[ 1496.882568] suspend: enter suspend
[ 1496.882751] PM: suspend entry 2013-10-14 19:17:38.359820384 UTC
[ 1496.882842] PM: Preparing system for mem sleep
[ 1496.882873] PM: Syncing filesystems...
[ 1496.891632] Freezing user space processes ...
[ 1496.905517] sync done.
[ 1496.920227] (elapsed 0.02 seconds) done.
[ 1496.920410] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 1496.940368] PM: Entering mem sleep
[ 1496.940368] Suspending console(s) (use no_console_suspend to debug)
[ 1496.946990] msm_fb_ext_suspend: Turning off HPD circuitry
[ 1496.948547] smb345_suspend+
[ 1496.948577] smb345_suspend-
[ 1496.964752] PM: suspend of devices complete after 21.936 msecs
[ 1496.965545] PM: late suspend of devices complete after 0.762 msecs
[ 1496.967864] power_suspend_late return 0
[ 1496.967895] PM: noirq suspend of devices complete after 2.318 msecs
[ 1496.967895] Disabling non-boot CPUs ...
[ 1497.001037] msm_pm_enter
[ 1497.001037] msm_pm_enter: power collapse
[ 1497.001037] msm_mpm_irqs_detectable: cannot monitor 000000,00000000,00000000,00000000,00000000,00000020,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000
[ 1497.001037] msm_pm_enter: return
[ 1497.001708] Enabling non-boot CPUs ...
[ 1497.006317] CPU1 is up
[ 1497.014404] CPU2 is up
[ 1497.024475] CPU3 is up
[ 1497.025970] PM: noirq resume of devices complete after 1.464 msecs
[ 1497.028442] PM: early resume of devices complete after 0.732 msecs
[ 1497.029724] wakeup wake lock: qcom_rx_wakelock
[ 1497.030059] smb345_resume+
[ 1497.030090] smb345_resume-
[ 1497.030944] msm_fb_ext_resume: Turning on HPD circuitry
[ 1497.034088] PM: resume of devices complete after 5.580 msecs
[ 1497.038269] PM: Finishing wakeup.
[ 1497.038269] Restarting tasks ...
[ 1497.040008] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
[ 1497.040191] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 1497.040283] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
[ 1497.040405] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 1497.046295] done.
[ 1497.046478] PM: suspend exit 2013-10-14 19:17:43.014942221 UTC
[ 1497.046813] suspend: exit suspend, ret = 0 (2013-10-14 19:17:43.015277658 UTC)
[ 1497.079406] wake lock qcom_rx_wakelock, expired
[ 1497.079711] suspend: enter suspend
[ 1497.079864] PM: suspend entry 2013-10-14 19:17:43.048302022 UTC
[ 1497.079956] PM: Preparing system for mem sleep
[ 1497.080169] PM: Syncing filesystems...
[ 1497.088012] sync done.
[ 1497.134063] Freezing user space processes ...
[ 1497.139862] bq27541_get_psp status: Not charging ret= 0x0101
[ 1497.140594] bq27541_get_psp status: Not charging ret= 0x0101
[ 1497.141265] bq27541_get_psp voltage_now= 4197000 uV
[ 1497.142028] active wake lock power-supply
[ 1497.142150]
[ 1497.142211] Freezing of user space aborted
[ 1497.142272]
[ 1497.142333] Restarting tasks ...
[ 1497.142364] bq27541_get_capacity = 96% ret= 95
[ 1497.143768] bq27541_get_psp temperature= 230 (0.1\xffffffa2XC)
[ 1497.144988] bq27541_get_psp current = -85 mA
[ 1497.146545] bq27541_get_capacity = 96% ret= 95
[ 1497.147247] bq27541_get_psp voltage_now= 4197000 uV
[ 1497.148162] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
[ 1497.148254] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 1497.148590] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
[ 1497.148742] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
[ 1497.148742] bq27541_get_psp temperature= 230 (0.1\xffffffa2XC)
[ 1497.149322] done.
[ 1497.149719] PM: suspend exit 2013-10-14 19:17:43.118107406 UTC
[ 1497.149841] suspend: exit suspend, ret = -16 (2013-10-14 19:17:43.118229388 UTC)
[ 1497.149993] active wake lock qcom_rx_wakelock, time left 4
[ 1497.150085] suspend: abort suspend
[ 1497.151611] bq27541_get_psp status: Not charging ret= 0x0101
[ 1497.189300] wake lock qcom_rx_wakelock, expired
[ 1497.189636] suspend: enter suspend
[ 1497.189636] PM: Syncing filesystems...
[ 1497.189758] PM: suspend entry 2013-10-14 19:17:43.158118797 UTC
[ 1497.189880] PM: Preparing system for mem sleep
[ 1497.190002] Freezing user space processes ...
[ 1497.196289] active wake lock qcom_rx_wakelock, time left 5
[ 1497.196441]
[ 1497.196502] Freezing of user space aborted
[ 1497.196563]
[ 1497.196624] Restarting tasks ...
I've also tried integrating the patch from the Nexus 4 in case it wasn't getting enough power. Still nothing. Any advice or direction would be much appreciated.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Since KitKat is becoming stable, I have built another ROM and decided to share it with you.
OmniROM is a free, community built, aftermarket firmware distribution of Android 4.4 (KitKat), which is designed to increase performance, reliability and features over stock Android for your device. It is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restores the Google parts.
All the source code for OmniROM is available in the OmniROM Github repo.
More information about Omni
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
NOT WORKING/BROKEN
Same as in CM11
Camera
CHANGELOG
Code:
[B][U]29/05/2014:[/U][/B]
[LIST]
[*]Fixed USB Mass storage - [URL="gerrit.omnirom.org/#/c/5041/"]gerrit.omnirom.org/#/c/5041/[/URL]
[*]Omni/omniarmv6 upstream
[/LIST]
[B][U]06/05/2014:[/U][/B]
[LIST]
[*]Fixed OMX
[*]Fixed camera video recording
[*]Omni/omniarmv6 upstream
[/LIST]
[B][U]01/05/2014:[/U][/B]
[LIST]
[*]Initial release
[/LIST]
DOWNLOAD
OmniROM - team-simplicit.com
BTW: This ROM is not rooted, you have to flash SuperSU!
SCREENSHOTs
SOURCEs
Manifest
Device Config
Kernel Source
CREDITS
My awesome team (izi501, feroxx, Kevinjoa, thehacka1) for being so awesome!
WinSuk for the linker/reboot fix
benjamingwynn
niks255
JDevs and the OWL Team
The androidarmv6 team
The Omni team
Great job Oli. [emoji111]
Gesendet von meinem LG-gee mit Tapatalk
Info about ME
You're impossible @Olivier :laugh:
Anyway... New dev is coming
CyanFrank said:
You're impossible @Olivier :laugh:
Anyway... New dev is coming
Click to expand...
Click to collapse
Oh my goodness I really can't get it Just gonna press the download button...
I can haz logcat?
Logcat time!
The rom is quite smooth IMHO even with INT2EXT enabled, there are a few quirks here and there
This is something that pops up quite some times in the logcat, something to do with the GPU
Code:
[ 05-03 16:55:09.561 5054: 5054 E/memalloc ]
/dev/pmem: Failed to map buffer size:4202496 offset:1843200 fd:83 Error: Invalid
argument
[ 05-03 16:55:09.561 5054: 5054 E/gralloc ]
Could not mmap handle 0x2a1eac10, fd=83 (Invalid argument)
[ 05-03 16:55:09.561 5054: 5054 E/gralloc ]
gralloc_register_buffer: gralloc_map failed
[ 05-03 16:55:09.561 5054: 5054 W/GraphicBufferMapper ]
registerBuffer(0x2a1eac10) failed -22 (Invalid argument)
[ 05-03 16:55:09.561 5054: 5054 E/GraphicBuffer ]
unflatten: registerBuffer failed: Invalid argument (-22)
[ 05-03 16:55:09.561 5054: 5054 E/Adreno200-EGLSUB ]
CreateImage() Invalid Native Buffer or handle
[ 05-03 16:55:09.561 5054: 5054 E/Adreno200-EGL ]
<qeglDrvAPI_eglCreateImageKHR:4160>: EGL_BAD_PARAMETER
Also, "Advanced settings" in "Performance" FCs
Code:
[ 05-03 16:58:34.951 4889: 4889 E/AndroidRuntime ]
FATAL EXCEPTION: main
Process: com.android.settings, PID: 4889
java.lang.NullPointerException
at java.io.File.fixSlashes(File.java:185)
at java.io.File.<init>(File.java:134)
at java.io.FileInputStream.<init>(FileInputStream.java:105)
at java.io.FileReader.<init>(FileReader.java:66)
at com.brewcrewfoo.performance.fragments.VoltageControlSettings.getVolts
(VoltageControlSettings.java:229)
at com.brewcrewfoo.performance.fragments.VoltageControlSettings.onCreate
(VoltageControlSettings.java:77)
at android.app.Fragment.performCreate(Fragment.java:1678)
at android.app.FragmentManagerImpl.moveToState(FragmentManager.java:859)
at android.app.FragmentManagerImpl.moveToState(FragmentManager.java:1062
)
at android.app.BackStackRecord.run(BackStackRecord.java:684)
at android.app.FragmentManagerImpl.execPendingActions(FragmentManager.ja
va:1447)
at android.app.FragmentManagerImpl$1.run(FragmentManager.java:443)
at android.os.Handler.handleCallback(Handler.java:733)
at android.os.Handler.dispatchMessage(Handler.java:95)
at android.os.Looper.loop(Looper.java:136)
at android.app.ActivityThread.main(ActivityThread.java:5017)
at java.lang.reflect.Method.invokeNative(Native Method)
at java.lang.reflect.Method.invoke(Method.java:515)
at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit
.java:789)
at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:605)
at de.robv.android.xposed.XposedBridge.main(XposedBridge.java:133)
at dalvik.system.NativeStart.main(Native Method)
The lights of capacitive keys and the notification LED do not work. Suggestions to get logcats for these?
Finally, The phone doesn't show any charging status or animation when the phone is plugged in, the phone is charging though.
Very Very good new htc wildfire s good olivier
csoulr666 said:
Logcat time!
Click to expand...
Click to collapse
Thanks for the logs! :good:
csoulr666 said:
The rom is quite smooth IMHO even with INT2EXT enabled, there are a few quirks here and there
This is something that pops up quite some times in the logcat, something to do with the GPU
Click to expand...
Click to collapse
Should be fixed in the next release...
csoulr666 said:
The lights of capacitive keys and the notification LED do not work. Suggestions to get logcats for these?
Finally, The phone doesn't show any charging status or animation when the phone is plugged in, the phone is charging though.
Click to expand...
Click to collapse
Look at the first screenshot, the device does show the charging symbol in the statusbar.
However, the lights and the notification LED really don't work. I will look into it ASAP.
EDIT: New update is up, check the OP!
Olivier said:
Look at the first screenshot, the device does show the charging symbol in the statusbar.
Click to expand...
Click to collapse
It does show a charging animation(I was using percent only, no animation there), but in the quick settings toggle or the diag menu(*#*#4636#*#*) do not show the charging status.
However, the lights and the notification LED really don't work. I will look into it ASAP.
Click to expand...
Click to collapse
Actually I found saw that LED works for certain notifications(only Gmail so far) but never for charging.......the latter might be because the system doesn't show the charging status
Also I have a question, will flashing the new update on the rom without wiping remove root as well??
csoulr666 said:
Will flashing the new update on the rom without wiping remove root as well??
Click to expand...
Click to collapse
I think so, because system (where SuperSU is located) gets wiped.
Olivier said:
I think so, because system (where SuperSU is located) gets wiped.
Click to expand...
Click to collapse
I just remembered, SuperSU asked me to install an addon script just to survive flashing...... Silly me:silly:
Question, you have not added UMS as of now am I right?? Because nothing pops up when I connect my phone to my PC
Wow! Looks like I'm the only one using OMNI, everyone else is glued to CM11 :laugh:
I got some more logs, hopefully helpful ones, regarding VPN ,bluetooth and wifi tethering
Thanks for the logs! Yep I just noticed that bug too - I will maybe look into it on the weekend.
Build from source ?
Olivier said:
Thanks for the logs! Yep I just noticed that bug too - I will maybe look into it on the weekend.
Click to expand...
Click to collapse
I have built CM11 from source, and would love to build this one too, to compare, I was expecting an omni branch in your github but didn't see it ?
Omni is at "android-4.4".
Gesendet von meinem Lenovo A3000-H mit Tapatalk
Awesome ROM but the quick pulldown disappear after reboot.
The patch not working camera
You always do the best olivier
Sent from my XT1032 using XDA Free mobile app
I'm not using this ROM
But,there is a workaround for USB Mass Storage bug,you see you can maybe use mobogenie pc app to make it work,because it mounts sd to pc without having to unmount it from device.
Best Wishes and tell me if it works
Camera?
I tried the camera patch with a complete wipe(including system) following the 6th may build........The "Can't connect to camera" prompt doesn't come but I'm greeted with a completely black screen, I tried a few other photo taking apps(Splitpic, Instagram and even a barcode scanner) but I still go the same result.
So here's a logcat of me opening the stock camera app
Code:
[ 05-07 21:02:49.867 615: 667 I/ActivityManager ]
Start proc com.android.camera2 for activity com.android.camera2/com.android.came
ra.CameraLauncher: pid=4766 uid=10050 gids={50050, 3003, 1028, 1015, 1023}
[ 05-07 21:02:50.817 4766: 4766 D/CameraStorage ]
External storage state=mounted
[ 05-07 21:02:50.827 4766: 4766 V/NFC ]
this device does not have NFC support
[ 05-07 21:02:50.858 4766: 4766 V/CAM_PhotoModule ]
On resume.
[ 05-07 21:02:50.858 4766: 4766 V/CAM_PhotoModule ]
Executing onResumeTasks.
[ 05-07 21:02:50.858 4766: 4766 V/CAM_PhotoModule ]
Open camera device.
[ 05-07 21:02:50.858 129: 129 D/AK8975 ]
Compass Start
[ 05-07 21:02:50.878 124: 1053 D/CameraHAL ]
CameraHAL_GetNum_Cameras: loading libcamera at 0x4077eed8
[ 05-07 21:02:50.888 4766: 4766 V/CameraHolder ]
open camera 0
[ 05-07 21:02:51.298 124: 668 D/ExtendedUtils ]
extended extractor not needed, return default
[ 05-07 21:02:51.558 124: 4221 D/ExtendedUtils ]
extended extractor not needed, return default
[ 05-07 21:02:51.808 124: 1053 D/ExtendedUtils ]
extended extractor not needed, return default
[ 05-07 21:02:51.919 124: 4221 D/ExtendedUtils ]
extended extractor not needed, return default
[ 05-07 21:02:52.119 124: 1053 D/ExtendedUtils ]
extended extractor not needed, return default
[ 05-07 21:02:52.299 124: 4221 D/ExtendedUtils ]
extended extractor not needed, return default
[ 05-07 21:02:52.519 124: 1053 D/ExtendedUtils ]
extended extractor not needed, return default
[ 05-07 21:02:52.719 124: 4221 D/ExtendedUtils ]
extended extractor not needed, return default
[ 05-07 21:02:52.920 124: 1053 D/ExtendedUtils ]
extended extractor not needed, return default
[ 05-07 21:02:53.110 124: 4221 D/ExtendedUtils ]
extended extractor not needed, return default
[ 05-07 21:02:53.190 124: 1053 D/ExtendedUtils ]
extended extractor not needed, return default
[ 05-07 21:02:53.410 124: 4221 D/ExtendedUtils ]
extended extractor not needed, return default
[ 05-07 21:02:53.590 124: 1053 D/ExtendedUtils ]
extended extractor not needed, return default
[ 05-07 21:02:53.790 124: 4221 W/MPEG4Extractor ]
ignoring edit list with 2 entries
[ 05-07 21:02:53.790 124: 4221 D/ExtendedUtils ]
extended extractor not needed, return default
[ 05-07 21:02:54.021 124: 668 W/MPEG4Extractor ]
ignoring edit list with 2 entries
[ 05-07 21:02:54.031 124: 668 D/ExtendedUtils ]
extended extractor not needed, return default
[ 05-07 21:02:54.231 124: 668 D/ExtendedUtils ]
extended extractor not needed, return default
[ 05-07 21:02:54.411 124: 1053 W/MPEG4Extractor ]
ignoring edit list with 2 entries
[ 05-07 21:02:54.421 124: 1053 D/ExtendedUtils ]
extended extractor not needed, return default
[ 05-07 21:02:59.786 615: 631 E/WindowManager ]
Starting window AppWindowToken{420b01a8 token=Token{420af890 ActivityRecord{420a
f6b8 u0 com.android.camera2/com.android.camera.CameraLauncher t453}}} timed out
[ 05-07 21:02:59.796 615: 632 W/ActivityManager ]
Launch timeout has expired, giving up wake lock!
[ 05-07 21:03:10.857 615: 632 W/ActivityManager ]
Timeout executing service: ServiceRecord{42208360 u0 com.android.camera2/com.and
roid.camera.MediaSaveService}
[ 05-07 21:03:10.917 615: 632 I/Process ]
Sending signal. PID: 4766 SIG: 3
[ 05-07 21:03:10.917 4766: 4771 I/dalvikvm ]
threadid=3: reacting to signal 3
[ 05-07 21:03:10.967 4766: 4771 I/dalvikvm ]
Wrote stack traces to '/data/anr/traces.txt'
[ 05-07 21:03:10.967 615: 632 I/Process ]
Sending signal. PID: 615 SIG: 3
[ 05-07 21:03:10.967 615: 620 I/dalvikvm ]
threadid=3: reacting to signal 3
[ 05-07 21:03:11.538 615: 627 E/Sensors ]
poll() failed (Interrupted system call)
[ 05-07 21:03:11.578 615: 632 I/Process ]
Sending signal. PID: 991 SIG: 3
[ 05-07 21:03:11.578 991: 996 I/dalvikvm ]
threadid=3: reacting to signal 3
[ 05-07 21:03:11.608 615: 620 I/dalvikvm ]
Wrote stack traces to '/data/anr/traces.txt'
[ 05-07 21:03:11.608 615: 632 I/Process ]
Sending signal. PID: 803 SIG: 3
[ 05-07 21:03:11.618 803: 815 I/dalvikvm ]
threadid=3: reacting to signal 3
[ 05-07 21:03:11.728 803: 815 I/dalvikvm ]
Wrote stack traces to '/data/anr/traces.txt'
[ 05-07 21:03:11.738 615: 632 I/Process ]
Sending signal. PID: 795 SIG: 3
[ 05-07 21:03:11.738 795: 809 I/dalvikvm ]
threadid=3: reacting to signal 3
[ 05-07 21:03:11.758 991: 996 I/dalvikvm ]
Wrote stack traces to '/data/anr/traces.txt'
[ 05-07 21:03:11.768 615: 632 I/Process ]
Sending signal. PID: 783 SIG: 3
[ 05-07 21:03:11.768 783: 794 I/dalvikvm ]
threadid=3: reacting to signal 3
[ 05-07 21:03:11.858 783: 794 I/dalvikvm ]
Wrote stack traces to '/data/anr/traces.txt'
[ 05-07 21:03:11.958 795: 809 I/dalvikvm ]
Wrote stack traces to '/data/anr/traces.txt'
[ 05-07 21:03:13.920 615: 632 E/ActivityManager ]
ANR in com.android.camera2
PID: 4766
Reason: Executing service com.android.camera2/com.android.camera.MediaSaveServic
e
Load: 10.33 / 14.25 / 12.94
CPU usage from 6040ms to 0ms ago:
1.3% 129/akmd: 0.1% user + 1.1% kernel
1.3% 615/system_server: 0.8% user + 0.4% kernel
0.3% 5/events/0: 0% user + 0.3% kernel
0.1% 109/yaffs-bg-1: 0% user + 0.1% kernel
0.1% 754/wpa_supplicant: 0.1% user + 0% kernel
1.8% TOTAL: 0.6% user + 1.1% kernel
CPU usage from 2456ms to 2995ms later:
12% 615/system_server: 1.7% user + 10% kernel
10% 632/ActivityManager: 1.7% user + 8.9% kernel
1.7% 615/system_server: 1.7% user + 0% kernel
9.2% TOTAL: 1.8% user + 7.4% kernel
[ 05-07 21:03:22.719 615: 632 W/ActivityManager ]
Force finishing activity com.android.camera2/com.android.camera.CameraLauncher
[ 05-07 21:03:22.729 615: 632 I/ActivityManager ]
Killing 4766:com.android.camera2/u0a50 (adj 0): user request after error
[ 05-07 21:03:23.019 129: 129 D/AK8975 ]
Compass CLOSE
[ 05-07 21:03:23.439 615: 625 W/InputMethodManagerService ]
Window already focused, ignoring focus gain of: com.android.internal.view.IInput
[email protected] attribute=null, token = [email protected]
41ed3308
I was wondering if it was possible to put my buttons that are on the bottom on portrait screen mode in the same orientation in landscape
8 are the locked buttons
portrait
__________
[ ]
[ ]
[ ]
[ ]
[ ]
[__88888__]
Landscape
_________________________
[ ]
[ ]
[ ]
[ ]
[______8 8 8 8 8______]
Need help i'm having the boot loop with KitKat kernels .I told about this issue to Sultan XDA ..and he replied as
Tell those kernel devs to fix their keypad driver:
[ 109.012786] Unable to handle kernel NULL pointer dereference at virtual address 0000001c
[ 109.012969] pgd = d5f14000
[ 109.013061] [0000001c] *pgd=5594e831, *pte=00000000, *ppte=00000000
[ 109.013458] Internal error: Oops: 17 [#1] PREEMPT SMP
[ 109.013580] Modules linked in: dhd vibrator frandom
[ 109.013977] CPU: 1 Not tainted (3.0.101-stock++ #1)
[ 109.014099] PC is at sec_keypad_enable_show+0x10/0x24.
[ 109.014282] LR is at dev_attr_show+0x1c/0x48...so find my problem here: http://forum.xda-developers.com/gal...t-4-3-roms-t2999362/post58093351#post58093351
I askes for a fix and he replied :
Your keypad hardware is slow to initialize at boot:
[ * *1.250640] [TKEY] get_touchkey_firmware F/W version: 0x0, Module version:0x0
[ * *1.250762] f/w read fail retry 6
[ * *1.250946] EXT_I2C No ACK
So some of the data structs in the keypad driver remain in a null state until keypad probe can complete. Some of that data is accessed before keypad probe on your specific device can finish (so it is dereferencing null data), thus crashing the kernel. It's being caused by the keypad-disabler feature, which my kernel does not have. Sorry, but I'm not really interested in fixing other people's kernels, so I can't help you with that........ Can any devs fix this for me plzz!!