Related
Hello everyone i want to install this rom http://forum.xda-developers.com/showthread.php?t=2735775 on my wildfire s but i am facing a problem. I have downloaded the newest zip file of the rom and when i try to flash it using cwm it writes :installation aborded. Zip file status (0).
What wrong i do guyes or is there any step that i had to do and haven't done it? Some accurate help (because i am pretty new at rooting etc) would be much apreceated!! Thank you for you time.
Giannis20 said:
Hello everyone i want to install this rom http://forum.xda-developers.com/showthread.php?t=2735775 on my wildfire s but i am facing a problem. I have downloaded the newest zip file of the rom and when i try to flash it using cwm it writes :installation aborded. Zip file status (0).
What wrong i do guyes or is there any step that i had to do and haven't done it? Some accurate help (because i am pretty new at rooting etc) would be much apreceated!! Thank you for you time.
Click to expand...
Click to collapse
This issue already described on that thread, just read the last few post/comment on that thread or this one.
thank you
testmasterbd said:
This issue already described on that thread, just read the last few post/comment on that thread or this one.
Click to expand...
Click to collapse
Thanks man! Two more questions, how i flash the recovery? Probably stupid question but i don't know the way..
After flashing the recovery i can just flash the zip rom or is there enything else it needed to be done ??
Giannis20 said:
Thanks man! Two more questions, how i flash the recovery? Probably stupid question but i don't know the way..
After flashing the recovery i can just flash the zip rom or is there enything else it needed to be done ??
Click to expand...
Click to collapse
There is too many way to flash custom recovery. For that you can use my signature (there is a link for CWM).
And if you need to know about custom recovery then read these Tutorial - 1, Tutorial - 2, Tutorial - 3 or use search option on XDA.
fine
testmasterbd said:
There is too many way to flash custom recovery. For that you can use my signature (there is a link for CWM).
And if you need to know about custom recovery then read these Tutorial - 1, Tutorial - 2, Tutorial - 3 or use search option on XDA.
Click to expand...
Click to collapse
Done it! Have upgraded and installed the rom!! All work fine! Just a little problem.. There is no Play Store.. Any suggestions ??
Oh! I almost forgot! And when newer editions or this rom are released how do i update?
Giannis20 said:
Done it! Have upgraded and installed the rom!! All work fine! Just a little problem.. There is no Play Store.. Any suggestions ??
Oh! I almost forgot! And when newer editions or this rom are released how do i update?
Click to expand...
Click to collapse
Just read the OP, you'll find everything You can update that ROM via OTA or fresh flash.
testmasterbd said:
Just read the OP, you'll find everything You can update that ROM via OTA or fresh flash.
Click to expand...
Click to collapse
Another silly question here.... What exactly is op???
I am new to all this and i don't know the terminology..
http://forum.xda-developers.com/showthread.php?t=1699838
testmasterbd said:
http://forum.xda-developers.com/showthread.php?t=1699838
Click to expand...
Click to collapse
ha!! i think i found what u mean.... this http://forum.xda-developers.com/showthread.php?t=2756379 ???
Yeap...
testmasterbd said:
Yeap...
Click to expand...
Click to collapse
But how am i supposed to install the gapps??? They say it in a hard to understand language (developer language)!!
Any easier directions??? Sorry to bother you but...
Giannis20 said:
But how am i supposed to install the gapps??? They say it in a hard to understand language (developer language)!!
Any easier directions??? Sorry to bother you but...
Click to expand...
Click to collapse
Just flash the gapps via CWM (same as ROM flashing)
All instruction are available on that thread. If you have any question regarding CM11 on WFS then you need to read thoroughly that thread.
testmasterbd said:
Just flash the gapps via CWM (same as ROM flashing)
All instruction are available on that thread. If you have any question regarding CM11 on WFS then you need to read thoroughly that thread.
Click to expand...
Click to collapse
Okay. Thanks!
testmasterbd said:
Just flash the gapps via CWM (same as ROM flashing)
All instruction are available on that thread. If you have any question regarding CM11 on WFS then you need to read thoroughly that thread.
Click to expand...
Click to collapse
oh! something that i just noticed.. what is cronmod ??
Giannis20 said:
oh! something that i just noticed.. what is cronmod ??
Click to expand...
Click to collapse
use my signature
testmasterbd said:
use my signature
Click to expand...
Click to collapse
I 've read some threads. Thing i got it! Pretty simple as i think.. I need to do that partition before i flash the cm11,before the gapps?
Giannis20 said:
I 've read some threads. Thing i got it! Pretty simple as i think.. I need to do that partition before i flash the cm11,before the gapps?
Click to expand...
Click to collapse
Yeap...
If you need any instruction then you can follow this GUIDE.
Hey guys
Does anyone know when we will get Cyanogen OS 13? I have been on stock for 2 weeks now due to a rumour of COS13 coming. If you have any news or even a beta build then please post it below.
Regards
Yasteel
AFAIK it's already released.
Android one Second Gen user here
nhmanas said:
AFAIK it's already released.
Android one Second Gen user here
Click to expand...
Click to collapse
really? I do not see it on https://cyngn.com/support
Dior DNA said:
really? I do not see it on https://cyngn.com/support
Click to expand...
Click to collapse
Ota released. Not ROM.
I though it was only the one plus one and only in india that rec'd the update
and still without the Modlife implementation
nhmanas said:
Ota released. Not ROM.
Click to expand...
Click to collapse
thanks! and what is name like cm-12.1 was YOG7DAS2FI crackling?
Dior DNA said:
thanks! and what is name like cm-12.1 was YOG7DAS2FI crackling?
Click to expand...
Click to collapse
I don't know we're discussing in a Turkish forum
nhmanas said:
I don't know we're discussing in a Turkish forum
Click to expand...
Click to collapse
once someone receives OTA cm 13 let us know, then we can ask support to publish file
Dior DNA said:
once someone receives OTA cm 13 let us know, then we can ask support to publish file
Click to expand...
Click to collapse
http://builds.cyngn.com/incremental/crackling/cm-crackling-c295bd1167-to-f865a1ad0e-signed.zip
6.0.1 ota
This is Cyanogen Mod, not Cyanogen OS.
koegs said:
This is Cyanogen Mod, not Cyanogen OS.
Click to expand...
Click to collapse
Has any flashed this to confirm exactly what it is
*edit* I'll confirm myself.. this is the real incremental to 6.0.1 'Mod ready' COS 13
To my surprise...it runs pretty well
ReneX10 said:
Has any flashed this to confirm exactly what it is
*edit* I'll confirm myself.. this is the real incremental to 6.0.1 'Mod ready' COS 13
To my surprise...it runs pretty well
Click to expand...
Click to collapse
updater-script says
Source 5.1.1 LMY48Y/YOG7DAS2FI
Target 6.0.1 MMB29V/ZNH0EAS25I
ReneX10 said:
Has any flashed this to confirm exactly what it is
*edit* I'll confirm myself.. this is the real incremental to 6.0.1 'Mod ready' COS 13
To my surprise...it runs pretty well
Click to expand...
Click to collapse
1. update package was verified without problems
2. installed without problems
3. won't boot... can't even get into recovery
InFlames0r said:
1. update package was verified without problems
2. installed without problems
3. won't boot... can't even get into recovery
Click to expand...
Click to collapse
Mine was a clean stock 12.1 install first, then update applied from recovery to 13
Mine is working just fine, no problems to report at all..... hrmm so, I wonder what's different
http://s32.postimg.org/vz9j03dhx/Screenshot_20160429_190709.png
Me too that's exactly what I did load 12.1 by fastboot to ensure everything is overwritten
note super su stock dosn't work but the beta does
I'm I noob here and I don't understand what everybody's talking about here. From my understanding, a flashable COS13 zip is out in the open and works? How should I go about flashing it if I want to keep TWRP recovery? Do I have to do a clean install?
seb5049 said:
I'm I noob here and I don't understand what everybody's talking about here. From my understanding, a flashable COS13 zip is out in the open and works? How should I go about flashing it if I want to keep TWRP recovery? Do I have to do a clean install?
Click to expand...
Click to collapse
as far as I am aware there is NO COS 13 zip for the crackling, only this incremental update (ie an update from 12.1, so that needs to be installed as a base first and then the update flashed from recovery)
There is CM 13, both snapshots and nightlies that an be flashed from TWRP as ZIPs
TWRP an be flashed from fastboot whenever you like, so that shouldn't cause you any major concerns :good:
ReneX10 said:
as far as I am aware there is NO COS 13 zip for the crackling, only this incremental update (ie an update from 12.1, so that needs to be installed as a base first and then the update flashed from recovery)
There is CM 13, both snapshots and nightlies that an be flashed from TWRP as ZIPs
TWRP an be flashed from fastboot whenever you like, so that shouldn't cause you any major concerns :good:
Click to expand...
Click to collapse
I have the stock rom already (COS 12.1), so does that mean I'm good if I flash it then?
seb5049 said:
I have the stock rom already (COS 12.1), so does that mean I'm good if I flash it then?
Click to expand...
Click to collapse
Personally I would ensure I have backed up, but in theory ..Yes, though if it were me.. I would, backup, wipe, flash stock recovery, update
I am afraid I can't answer fully, as I always flash clean...soz
ReneX10 said:
Personally I would ensure I have backed up, but in theory ..Yes, though if it were me.. I would, backup, wipe, flash stock recovery, update
I am afraid I can't answer fully, as I always flash clean...soz
Click to expand...
Click to collapse
Ok. Well, if I backup beforehand then I should be fine if anything goes wrong. One last question though, do I need stock recovery in order to flash the zip?
Dear Community,
I just flashed TWRP 3.0.3 and installed LineageOs 13 by powermetza... How do I obtain root? Instructions told to flash it optionally, but there was no root.zip included in that thread. Can someone share a link? Thx in advantage
@gr8nole ! I need your wisdom and magic sir!
Droehnemeier said:
@gr8nole ! I need your wisdom and magic sir!
Click to expand...
Click to collapse
https://download.lineageos.org/extras
Choose the "arm" version for 13.0.
Thanks a ton for your help! And all other efforts.. I'll try immediately
gr8nole said:
https://download.lineageos.org/extras
Choose the "arm" version for 13.0.
Click to expand...
Click to collapse
That did not work TWRP says 4 errors occured while flashing process, but without deyails.
I downloaded twice, thought that a bad file might be the reason, but no.
In developers options the "root" options are extended though, but take no effect when root is activated. I installed SuperSu and tried to complete the .binary without success. I can't find my mistake ?
Droehnemeier said:
That did not work TWRP says 4 errors occured while flashing process, but without deyails.
I downloaded twice, thought that a bad file might be the reason, but no.
In developers options the "root" options are extended though, but take no effect when root is activated. I installed SuperSu and tried to complete the .binary without success. I can't find my mistake ?
Click to expand...
Click to collapse
Can't help you there, I have never needed to use that root zip.
Why don't you just use Lineage 14.1? it has root built-in, just enable it in Dev Options.
gr8nole said:
Can't help you there, I have never needed to use that root zip.
Why don't you just use Lineage 14.1? it has root built-in, just enable it in Dev Options.
Click to expand...
Click to collapse
It's my first flash on this device ... I wasn't sure if 14.1 is too heavy or too alpha for daily use.
Can you recommend it for daily use? thank you for your time!
Droehnemeier said:
It's my first flash on this device ... I wasn't sure if 14.1 is too heavy or too alpha for daily use.
Can you recommend it for daily use? thank you for your time!
Click to expand...
Click to collapse
It works great for T310.
Sent from my SM-G920V using Tapatalk
:laugh: alright, I'm coming I owe you a beer at least! \(")/ thanks again
Droehnemeier said:
:laugh: alright, I'm coming I owe you a beer at least! \(")/ thanks again
Click to expand...
Click to collapse
New builds will be up today.
Sent from my SM-G920V using Tapatalk
gr8nole said:
New builds will be up today.
Click to expand...
Click to collapse
Nice, I wait until you've posted it. I'm looking forward to flash your rom, I watched your work for a long time and you always did a great job and you seem to be one of the best devs for our device, I'm pretty sure it will fly like a bird with your rom ?
Clean, smooth ROM, based on AOSP, no features added.
I test my builds on my own OP5 which is DECRYPTED.
Installation is standard:
1. Wipe cache/data/system.
2. Flash ROM
3. [Optional] Flash Gapps/Magisk
4. Reboot
Github sources: https://github.com/PixelExperience
Kernel: https://github.com/GZR-Kernels/kernel_oneplus_msm8998
Device tree: https://github.com/GZOSP-Devices/device_oneplus_cheeseburger
https://github.com/GZOSP-Devices/device_oneplus_msm8998-common
GZR gapps: https://androidfilehost.com/?w=files&flid=235145
Download:
https://androidfilehost.com/?fid=673956719939821037
Did I actually make 1st lol
Sent from my ONEPLUS A5000 using Tapatalk
twcobra said:
Did I actually make 1st lol
Sent from my ONEPLUS A5000 using Tapatalk
Click to expand...
Click to collapse
:good:
Thanks quake73 for the new ROM. Do I need to flash no verity if I'm encrypted?
Spinvis said:
Thanks quake73 for the new ROM. Do I need to flash no verity if I'm encrypted?
Click to expand...
Click to collapse
I beleieve noverity is (was) used for decrypted devices, I used it in the past, now not anymore, I think the newest twrps made it obsolete. As for the encrypted devices I really cannot say anything because mine is decrypted and is the only device I have flashed on. I don't know whether and how it works on ecrypted ones.
Any screenshots?
omagad omagad, that's what i wanted for 3 months. even tried to compile and make it myself, but here it is! thank you.
more_than_hater said:
omagad omagad, that's what i wanted for 3 months. even tried to compile and make it myself, but here it is! thank you.
Click to expand...
Click to collapse
I actually have shared my first build on AFH a month ago but was hesitant about opening a thread here
How well does it behave with the slider on the phone?
I love this ROM really but one thing I have to do every time after an clean install in that I have to install again phone,messaging,contacts...having them installed already I think it would be an good thing for most of us
THANK YOU
uCristian said:
I love this ROM really but one thing I have to do every time after an clean install in that I have to install again phone,messaging,contacts...having them installed already I think it would be an good thing for most of us
THANK YOU
Click to expand...
Click to collapse
I don't know why the maintainers remove those parts from google's sources, maybe they intend to include them later. Anyway, yours is a good idea, I might give it a try adding them back.
You've made a right decision!
However, after installing gapps, I can't use FaceLock, which can be normally used in the previous version of the rom.
quake73 said:
I beleieve noverity is (was) used for decrypted devices, I used it in the past, now not anymore, I think the newest twrps made it obsolete. As for the encrypted devices I really cannot say anything because mine is decrypted and is the only device I have flashed on. I don't know whether and how it works on ecrypted ones.
Click to expand...
Click to collapse
Thanks for making Pixel Experience available for us. Can you please comment on the battery life of this and/or post battery stats here please. That would be great help.
Which camera app is used in this ?
Clean install on my decrypted device but Android boot screen ...
PacyLiu said:
You've made a right decision!
However, after installing gapps, I can't use FaceLock, which can be normally used in the previous version of the rom.
Click to expand...
Click to collapse
Use unofficial open gapps nano.
morfances said:
Clean install on my decrypted device but Android boot screen ...
Click to expand...
Click to collapse
i forgot to mention, use these gapps, they work
https://androidfilehost.com/?w=files&flid=235145
thanks for the rom, i was waiting for a thread because i used the 20/01 rom already
Bootloop
Guys are in bootloop after flash this rom. To solve I have to flash the rom and this file no_verity_op5_v2? ..
I have the encrypted memory, to flash this rom must be decrypted?
dark90_ said:
Guys are in bootloop after flash this rom. To solve I have to flash the rom and this file no_verity_op5_v2? ..
I have the encrypted memory, to flash this rom must be decrypted?
Click to expand...
Click to collapse
i think you need to be decrypted, but first you need to format data if you are encrypted, after that flash rom + noverity
Hi there...
I am having a Blackview BV5800 Pro and i want to try make it faster and better... so a custom firmware will be better (because of no more supporting from the manufacter)... i think...
but before buying a new device - i want to try it...
So i ve check Treble (treble check and treble info) ... is supported...
having ARM 64, says only A is compatible... but need root...
1) already download: lineage-18.1-20210111-UNOFFICIAL-treble_arm64_avS.img from AndyYan sourceforge site hope that will work with my device...
2) next step before trying anything is to find right TWRP for my device... but where ? any help...
3) then i ll try to unlock my device bootloader... seems that this will work ? https://www.getdroidtips.com/unlock-bootloader-mediatek-device/
So actually need the 2,3 steps... and then how i will install firmware already download (with sptool ?)... ?
The other steps...
Thanks in advance...
I doubt a gsi will be faster or better. Do a factory reset and disable all bloatware. You will be surprised, how fast your old phone can get.
...GSI... hmm...
where i can find a GSI firmware/ROM for my phone... ?
and the way (guide) to install it ...
Thanks in advance...
cyberdreamer said:
...GSI... hmm...
where i can find a GSI firmware/ROM for my phone... ?
and the way (guide) to install it ...
Thanks in advance...
Click to expand...
Click to collapse
Search for phhusson
kurtn said:
Search for phhusson
Click to expand...
Click to collapse
Thanks...but
1) sorry but very generic... get 21 pages ... may be more specific (i think is a user... phhusson) - will help if giving me a direct link to read specific guide for GSI that will be at least compatible with my model...
2) GSI... again i need TWRP for my phone... where i can find one ?
Thanks AGAIN - i hope not being mean...
cyberdreamer said:
Thanks...but
sorry but very generic... get 21 pages ... may be more specific (i think is a user... phhusson) - will help if giving me a direct link to read specific guide for GSI that will be at least compatible with my model...
Thanks AGAIN - i hope not being mean...
Click to expand...
Click to collapse
Sorry. Didn't read the whole thread. You started with a question about Andy yan IMG file. That is a gsi file. I recommended not to use it and stay on stock ROM instead. End of discussion where it started.
ok.. your opinion is respected
...but if i want to try it... is there any TWRP compatible with my model (question to everyone reading this thread)... that will work for me...