Develop Bugs

Android P on Redmi 5 Plus

For those who want to try Android P here are the how-to.
I just sharing the experience, I´m not involved in the project.
The sources will free-up for the ends of the month so maybe some dev could put his hands on it.
For now it´s unlikely unstable and with some bugs but usable for a basics and sharing some issues could be solved.
A good introducing for a better comprehension :
https://www.xda-developers.com/android-p-beta-port-snapdragon-project-treble-devices/
This is the general thread:
https://forum.xda-developers.com/pr...ment/rom-android-p-developer-preview-t3816659
These are the steps for our device:
https://forum.xda-developers.com/showpost.php?p=77101817&postcount=308
Maybe someone can wipe too system adding to the steps of wiping from recovery and only will stay vendor partition needed to boot.
Other links:
Treble rom base: https://forum.xda-developers.com/redmi-note-5/development/rom-cardinalaosp-t3774232
Recovery used for this: https://forum.xda-developers.com/re.../official-orangefox-recovery-project-t3807479
I tried before with the latest recovery provided for miui 10 (vince_treble_twrp-jay-port-v3), I formatted data to can boot as indicated for some users in the thread but never boot and never recovered the ability to see files and flash nothing more directly (but adb sideload) from this twrp version, any of the three no-verity/lazyflasher/antibootloop worked for this so I started again with Orange Fox recovery. (although any treble recovery could work following right steps indicated)
No need to flash callfix.zip.
Some screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

would appreciate if you provide the list of bugs and what about major things like volte and camera2api?

ridersam said:
would appreciate if you provide the list of bugs and what about major things like volte and camera2api?
Click to expand...
Click to collapse
I didn´t try many, for me it´s in beta level yet but as far as I know VoLTE is a global bug in all devices yet and camera2api it´s not working for me but maybe with other mods can work so in some devices it works, but we can expect that as many users and devs take part of this then we get more advance. I hope that users can share the experiences and so help others.

I use android p. And for me this gsi is much better than los 15.1 ... except for fingerprint. 2api camera works great! only first you need to flash .zip 2api, only after that install the camera application! The battery holds well, and is pleasant and smooth to use.)) I love the new from Google)

I am currently on DP 3 so should i flash clean or dirty flash over DP 3

I did the exact steps and still it goes directly to fastboot and does not boot the os

ibbi.ir7 said:
I am currently on DP 3 so should i flash clean or dirty flash over DP 3
Click to expand...
Click to collapse
DP3 is the GSI, what do you want to flash over DP3?

seekahaa said:
I did the exact steps and still it goes directly to fastboot and does not boot the os
Click to expand...
Click to collapse
Did you made wipes before to flash Cardinal treble?

SubwayChamp said:
Did you made wipes before to flash Cardinal treble?
Click to expand...
Click to collapse
Yes I wiped everything as I supposed to, still nothing.
I will try the same steps again now.

SubwayChamp said:
Did you made wipes before to flash Cardinal treble?
Click to expand...
Click to collapse
I started from start to flash DP 4 and it is more fluid than DP 3.

Anyone tried with a treble enabled custom kernel?

why cardinal treble rom ? cant we use other treble based roms ?

---account closed

---account closed

langster- said:
I got DP4 installed on the Redmi 5 Plus 3GB version. It does work and you can use it but there are some major problems and the rom is totally unusable.
- the launcher crashes constantly (pixel launcher isn't responding) so you lose your navigation and phone is unusable
- even when the launcher isn't crashed everything is so slow (20 seconds to open any app) and the pill switcher is 10 seconds to open
- no double tap to wake phone is a joke
- no fingerprint sensor at all
- no volte
- no camera
- google treble is full of bloatware that you are forced to download for the phone to work
- dark theme doesn't work on settings
All in all a total fail by google just like their new gmail interface, but well done to the developer who tried to port it.
Guys don't waste your time with this just install a normal custom rom.
If you must try it take a nandroid backup first and after restoring your nandroid backup there is a stupid bug in TWRP you have to use file manager to delete /data/system/locksettings.db to get back into your phone!
Click to expand...
Click to collapse
https://www.youtube.com/watch?v=-oksFOzjR1o this guy was able to run it flawlessly. You must have done something wrong i guess.

---account closed

langster- said:
see how he doesn't open playstore, that is because the playstore patch is not installed installed yet.
once he installs the playstore patch it will turn into what i described.
i was very excited because of videos like that also, but no, i will reinstall just in case I did something wrong, but i highly doubt it.
Click to expand...
Click to collapse
maybe you are right but atleast i get a hope that our device will soon be running Android P.
another thing do u know why every developer has stopped working on Treble ROMS?

---account closed

I got it to work, and it is cery smooth for a port. My main issue is the wifi keep disconnecting and random freezes on the os. Other than that everything works as smooth as it should even the fingerprint.

---account closed

[GSI][8.1.0][OFFICIAL] [James][Nora][Hannah] Resurrection Remix O v.6.1.0

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
About ResurrectionRemix
Resurrection Remix the ROM has been based on CM , SlimRoms, Omni and original Remix ROM builds, this creates an awesome
combination of performance, customization, power and the most new features, brought directly to your Device.
Many things that in previous versions were tweaked with mods, are now included by default in the ROM so, please enjoy!
Special thanks to, the CM team, Omni team , SlimRoms and of course to all the supporters.
All the source code for Resurrection Remix is available in the RR GitHub repo: https://github.com/ResurrectionRemix
Official Resurrection Remix ROM changelog: https://github.com/ResurrectionRemix/android_vendor_resurrection/blob/oreo/CHANGELOG.mkdn
Original thread: https://forum.xda-developers.com/project-treble/trebleenabled-device-development/gsi-resurrection-remix-o-6-1-0-t3811299
Download Links
[URL="https://sourceforge.net/projects/resurrectionremix-oreo/files/armaonly/"]https://sourceforge.net/projects/resurrectionremix-oreo/files/armaonly/[/URL]
How to flash
- LineageOS 15.1 installed in order to use GSI ROMs (Optional) you can install over stock without problem. I've tested
- Download the latest build of Resurrection Remix ROM (I recommend to download without gapps and then install them later)
- Full wipe and factory reset (recommended / backup to make sure not to loose data)
- Flash the Resurrection Remix ROM GSI from the Recovery
- Reboot
- Gapps working on RR OS with the img that includes the gapps, but I'm not pretty sure If they work because of installing the image over stock ROM, and then I flash the fix given below, after flashing the image (try by yourself)
What's working
- Camera (use Opencamera o Google Camera) for gcam put into build.prop: persist.camera.HAL3.enabled=0
- Bluetooth
- Sensors
- Flashlight
- MTP
- Wifi (if it doesn't work, just wipe Dalvik/ART and cache with TWRP)
- Data
Not Working
- You tell me
- Navbar is not shown at the beginning, go to settings, RR Configurations and enable it
Lag fix for RR (Updated with new build.prop lines): https://drive.google.com/open?id=1ANWEsNgWM_OpDFoAOFUb0H3lwSnrNIdp
Device Tree: https://github.com/phhusson/device_phh_treble
Vendor/Hardware Overlays: https://github.com/phhusson/vendor_hardware_overlay
Build Scripts(upload scripts are ignored):
https://github.com/mracar07/rr_treble_scripts
Thanks to
@phhusson for all the efforts in project treble
@mracar for providing RR OS Official GSI
The LineageOS Team
The CyanogenMod Team
Everyone involved in working and testing

No go, error 255

so, you recommend only the img without the gapps then the fix... if we want to install the gapps later, where should we download them seperately without the need of the whole rom?

1juanzh0 said:
No go, error 255
Click to expand...
Click to collapse
On TWRP? which model and how did you installed?

SeerePetrova said:
so, you recommend only the img without the gapps then the fix... if we want to install the gapps later, where should we download them seperately without the need of the whole rom?
Click to expand...
Click to collapse
That's the way it worked for me, the version with Gapps are Go Apps from Android Go, sometimes you can use them without registering, but I don't know, sometimes they work and others not, you could try, but in my case I couldn't install gapps from TWRP, then I used RR with gapps

Fersho said:
On TWRP? which model and how did you installed?
Click to expand...
Click to collapse
Tried flashing thru TWRP, not fastboot, over stock OS. Hannah XT1924-7, MetroPCS variant.

1juanzh0 said:
Tried flashing thru TWRP, not fastboot, over stock OS. Hannah XT1924-7, MetroPCS variant.
Click to expand...
Click to collapse
Then try using LOS 15.1 instead, and removing encryptation, if it doesn't works maybe your variant is not compatible

Thanks, I got it to work thru fastboot. Had to fastboot - w right after flashing the .img file

how do we fix wifi issues. for example mine says that its connected with internet access but when i try to download or anything, it says that im not connected. The instructions say that we should erase dalvik cache and cache inside twrp but its encrypted and it doesnt allow me to mount those partitions to properly reset dalvik

SeerePetrova said:
how do we fix wifi issues. for example mine says that its connected with internet access but when i try to download or anything, it says that im not connected. The instructions say that we should erase dalvik cache and cache inside twrp but its encrypted and it doesnt allow me to mount those partitions to properly reset dalvik
Click to expand...
Click to collapse
because you need to decrypt the device in order to be in a custom ROM, edit fstab.qcom and flash no verity kernel for E5

XT1921-5 Boost variant
It does not work using a Verizon SIM. This phone has all the hardware capabilities of working on the Verizon network, with all CDMA and 4G LTE bands.
EDIT: It also does not work with preformated EXFAT sd cards, always reports as corrupt. This problem was fixed years ago on many phones/roms, but this rom has this problem.
EDIT2: I just tried the SIM that came with the phone and that is doing the exact same thing except instead of blank signal icon on the status bar I have a no SIM card icon.
In Hidden Settings app, it shows this
Phone Number: Unknown
IMSI: Unknown
Current Network:
Signal Strength:
Voice Service:
Data Service: Disconnected
Voice Network Type: Unknown
Data Network Type: Unknown
Voice Call Status:
Roaming:
I've tried changing "Set Preferred Network Type:" but it does nothing. I have also tried turn "Mobile Radio Power" on and off and still nothing. I just have a blank signal bar at the top, nothing mentioning Verizon.
In Settings/Network & Internet/Mobile Network/ it just shows everything greyed out with it turned off. Any ideas?

Hello, which version of Google Camera is working and what does/doesn't work? I just wan't hdr+ tbh lol

Beautiful work @Fersho. I'm very pleased to see a skilled developer such as yourself contributing these great pieces of development for these Moto E5 models.

1juanzh0 said:
Thanks, I got it to work thru fastboot. Had to fastboot - w right after flashing the .img file
Click to expand...
Click to collapse
I have MetroPCS also. Can you please give me the instruction of how you flashed the rom in fastboot. I'll be sure to hit the 'Thanks' button multiple times.

MotoJunkie01 said:
Beautiful work @Fersho. I'm very pleased to see a skilled developer such as yourself contributing these great pieces of development for these Moto E5 models.
Click to expand...
Click to collapse
Thanks, but as It is said in the thread I'm not a developer, I'm just sharing the way to install GSI, then I mentioned that the ROM is not mine, the only thing that I made by myself is the fix for lag issues, then I noticed that nobody shared here how to install GSI, and I tested all the GSI available for ARM in order to let you know which are the best or which ones where working, but as you know I love to share what I know, and I'm glad that people are able to use another ROM thanks to Treble and devs

Fersho said:
Thanks, but as It is said in the thread I'm not a developer, I'm just sharing the way to install GSI, then I mentioned that the ROM is not mine, the only thing that I made by myself is the fix for lag issues, then I noticed that nobody shared here how to install GSI, and I tested all the GSI available for ARM in order to let you know which are the best or which ones where working, but as you know I love to share what I know, and I'm glad that people are able to use another ROM thanks to Treble and devs
Click to expand...
Click to collapse
I realize you're not a "developer" in your own words, but I suppose that is a result of your humbleness. I make the same claim, and give all credit to the developers and maintainers of the GSIs. Nevertheless, I thank you all the same for your time and contributions, and I'm very glad you are a contributing part of the Moto E5 forum.

MotoJunkie01 said:
I realize you're not a "developer" in your own words, but I suppose that is a result of your humbleness. I make the same claim, and give all credit to the developers and maintainers of the GSIs. Nevertheless, I thank you all the same for your time and contributions, and I'm very glad you are a contributing part of the Moto E5 forum.
Click to expand...
Click to collapse
Well Is much appreciated what you say, and don't worry is just for helping each others

imakul8 said:
I have MetroPCS also. Can you please give me the instruction of how you flashed the rom in fastboot. I'll be sure to hit the 'Thanks' button multiple times.
Click to expand...
Click to collapse
boot the phone into fastboot and type:
fastboot flash system system-180818-arm-aonly-vanilla-nosu.img
after:
fastboot -w
lastly:
fastboot reboot

I've installed & everything seems to be running fine. Had the sd card issue & accidentally erased all my backups. Only issue now is GAPPS. Can someone explain to me how I get the ID to register?

Audio stutter/freezing when locked and on standby
Audio would stutter/freeze on standby (music and notifications), and audioFX was the issue, so thought to report and let the community know
to fix
1. reboot to twrp and mount system r/w
2. go to /system/priv-app/AudioFX and rename AudioFX.apk and delete the last letter to look like this : AudioFX.ap
reboot and audio should work properly
Hope that helps, And love the rom!
Moto E5 Play
XT1921-1 (James)

[ROM] [UNOFFICIAL] Lineage OS 16.0 -- 7/10/19

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What This Is
This is a personal project to get Lineage OS running on my Pixel 3a. As such it is provided as is, though I will endeavor to provide regular builds and offer limited support as I am able.
What's Been Tested
This is my daily driver, so I've flashed ElementalX kernel and openGapps Pico over stock.
T-Mobile (at least), camera, wifi, bluetooth, gps are used regularly without issue.
What Was Not Tested
Root
Squeeze sensor
Gapps beyond Pico
Known Issues
eSIM doesn't work and has been removed
If flashing Gapps, an app downloaded at first-time setup Data Transfer Tools will crash constantly and needs to be uninstalled. This may mean you can't transfer data from an old phone to this one via setup.
Downloads
Lineage OS 16.0 Unofficial
Installation
I have not had success with an installable zip for TWRP yet, so the rom images must be flashed via fastboot. You should be familiar with fastboot before attempting to install this rom. It is recommended that you back up your current OS before installing a new one.
Installing this or any rom will void your warranty.
After unlocking OEM and your bootloader, boot into bootloader either with fastboot reboot bootloader or by holding VOLUME DOWN + POWER from power off, plug your phone into the computer.
If running on a linux machine with fastboot installed you can execute the flash-all.sh script included in the download. Alternatively or otherwise:
fastboot flash boot boot.img
fastboot flash dtbo dtbo.img
fastboot flash vbmeta vbmeta.img
fastboot flash system system.img
fastboot flash vendor vendor.img
fastboot -w (to wipe cache and data)
After installing, Gapps (ARM64, 9.0, see note in Known Issues), kernels, Magisk (UNTESTED) and other zips can be installed as normal via TWRP.
I Wanna Go Back
Up-to-date stock images are provided by Google and can be reflashed from bootloader.
Just follow the instructions at the top of the page.
Sources
LineageOS
Vendor proprietary packages (thanks to Dirty Unicorns and ZVNexus)

Nice work! I'll have to wait until tonight to test it.
I've been working on my own builds. The June firmware worked well, but after updating to July firmware and vendor, WiFi calling isn't working. The camera had always been a little fickle. I can't wait to test...

Does it support Google Camera fully (with motion and everything)?
Any hope of making it official?
Great work!

gee one said:
Nice work! I'll have to wait until tonight to test it.
I've been working on my own builds. The June firmware worked well, but after updating to July firmware and vendor, WiFi calling isn't working. The camera had always been a little fickle. I can't wait to test...
Click to expand...
Click to collapse
Let me know what you discover! I haven't tested wifi calling (wouldn't even know how) wifi calling works fine on T-Mobile, and while I looked through my logcat, I can't say I was entirely confident in my ability to read it...
Mostly 'access denied' errors on some gpu libraries and an error reading the squeeze sensor config (but only when I'm connected to adb).
koichirose said:
Does it support Google Camera fully (with motion and everything)?
Any hope of making it official?
Great work!
Click to expand...
Click to collapse
Thanks! I hadn't tested google camera motion till now, but it doesn't look to be working works with Google Photos installed. Haven't had trouble with pictures and video otherwise through it though.
In regards to making it official, maybe with some polish. I'm new to the android dev scene so not too confident in my ability to maintain a project like this yet.
But I'll look into the process.

pipyui said:
Let me know what you discover! I haven't tested wifi calling (wouldn't even know how), and while I looked through my logcat, I can't say I was entirely confident in my ability to read it...
Mostly 'access denied' errors on some gpu libraries and an error reading the squeeze sensor config (but only when I'm connected to adb).
Thanks! I hadn't tested google camera motion till now, but it doesn't look to be working. Haven't had trouble with pictures and video otherwise through it though.
In regards to making it official, maybe with some polish. I'm new to the android dev scene so not too confident in my ability to maintain a project like this yet.
But I'll look into the process.
Click to expand...
Click to collapse
Yes, I get a lot of selinux errors in the logcat too. I haven't had time to research them.
The squeeze issue is odd, perhaps some uid is conflicting. I think these are set up in the init files.

Nevermind @koichirose, camera Motion works fine once I installed Google Photos. :good:
gee one said:
Yes, I get a lot of selinux errors in the logcat too. I haven't had time to research them.
The squeeze issue is odd, perhaps some uid is conflicting. I think these are set up in the init files.
Click to expand...
Click to collapse
It's odd that it only shows up when I connect to logcat via adb. Local terminal logcat doesn't show me these squeeze errors.
Also, wifi calling working on T-Mobile :good:

Thanks for building. I had issues installing apps from the play store, lots of download pending despite force stopping play store and several reboots. Also magisk doesn't appear to work when flashed through twrp. I didn't try patching the kernel through magisk manager though. Good first look though!

Chronzy said:
Thanks for building. I had issues installing apps from the play store, lots of download pending despite force stopping play store and several reboots. Also magisk doesn't appear to work when flashed through twrp. I didn't try patching the kernel through magisk manager though. Good first look though!
Click to expand...
Click to collapse
I ran into this same issue - had to remove Data Transfer Tools (don't need root for this, since it was downloaded by gapps) and do a cache wipe to be able to download apps again. I think it blocks you from using the play store until you complete google's first-time setup, and this app blocks that (not to mention it crashes frequently).
I'll test out Magisk when I'm able. You may need to enable root access to apps in dev settings, but I'm unsure.

OMG thank u so much! Was waiting for this forever, hope you can make twrp zip

Getting "Sim not Found" on both rooted and unrooted

Tiebe said:
Getting "Sim not Found" on both rooted and unrooted
Click to expand...
Click to collapse
Have you checked OP? eSIM doesn't work. Need physical SIM

Uzephi said:
Have you checked OP? eSIM doesn't work. Need physical SIM
Click to expand...
Click to collapse
I have a physical sim. I solved the problem tho. I just had to reflash the stock radio image

Thanks for putting a build together! Provides even more incentive for me to make the switch over to a 3a Keep up the good work.

Is the device showing as certified without root?

Could anybody who has been testing out this rom give me any idea of what their battery life is like? I feel like mine has been much worse since flashing this. Dropped 10% overnight with nothing running and in airplane mode.

any chance for a 3aXL port? I've been wanting to do one myself but I'm in the middle of a kitchen remodel so not much time to setup a build environment.

Unstroofy said:
Is the device showing as certified without root?
Click to expand...
Click to collapse
It is not certified.
Dreamsocks66 said:
Could anybody who has been testing out this rom give me any idea of what their battery life is like? I feel like mine has been much worse since flashing this. Dropped 10% overnight with nothing running and in airplane mode.
Click to expand...
Click to collapse
I get about 2 days out of a charge on ElementalX kernel, but I'm sorry to say I've hardly tested vanilla LoS kernel.
In my experience I usually have to go through a full charge cycle on a new rom then restart my phone for battery life to stabilize.
Geo411m said:
any chance for a 3aXL port? I've been wanting to do one myself but I'm in the middle of a kitchen remodel so not much time to setup a build environment.
Click to expand...
Click to collapse
While I should be able to build an XL port, I won't be able to test it myself. Let me know if you'd like to run a build in beta.

pipyui said:
It is not certified.
I get about 2 days out of a charge on ElementalX kernel, but I'm sorry to say I've hardly tested vanilla LoS kernel.
In my experience I usually have to go through a full charge cycle on a new rom then restart my phone for battery life to stabilize.
While I should be able to build an XL port, I won't be able to test it myself. Let me know if you'd like to run a build in beta.
Click to expand...
Click to collapse
I'll test for you

Neat, I'll get a build together for ya tonight then.

Any chance of a flashable zip for the official twrp?

[Guide] [monet] Flashing GSI Roms

Hey y'all, after 2 days of headaches with a semi bricked device from a friend i was finally able to get a GSI Rom running.
Here's what you need:
1. Unlocked Bootloader
2. Stock Recovery
https://mega.nz/file/m4Q0iJpR#wP9U5gpXwTVrSWezkaoJqDjgb0zadULTLpb8kLAZJRE
3. GSI Rom (i used Bliss and it works flawless)
https://forum.xda-developers.com/pr...ent/unofficial-blissroms-q-mod-bless-t4138687
4. A PC running Linux
So the problem is that this device comes with a super partition. That means TWRP isnt able to flash a System Image because there is not a system partition instead there is this super partition wich is new to Android 10 and is dynamic. However you need to boot to fastbootd mode to access the system partition inside the super partition.
Important!! You need Stock Recovery for this you can not boot into fastbootd via TWRP at this moment. Also you need Linux because there is only a unsigned Driver for Windows for the fastbootd mode and i dont recommend using unsigned chinese drivers.... i use Manjaro that worked out of the box.
Mi 10 Lite 5G is Treble A/B enabled so we need an A/B Rom Bliss is providing that. Follow these steps to flash the GSI.
1. Reboot to bootloader then enter: fastboot reboot fastboot (there should be the text fastbootd in yellow)
2. fastboot -w (there is maybe an error but this is ok)
2. fastboot erase system
3. fastboot flash system "GSI-ROM-name-without-quotes".img
4. fastboot reboot bootloader
5. fastboot reboot
If it bootloops your GSI is not compatible (Havoc for example) just try it till you're satisfied. This is an first step for Stock Android on our Device. i will build some Custom Roms in the next weeks.
EDIT:
Ok i got Bliss fully up and running Fingerprint and even Google Pay works! There is some things you need to do though.
Preparation:
Stock Recovery
Bliss GSI
Audio Policy Fix.xml: https://mega.nz/file/i4QWkbSD#a3U90V1kk0S01DYxjN3YH-0HsAbo_UUU_rMd7LhYLFc
Procedure:
1. Boot into fastbootd like described above and flash the GSI
2. After boot set Magisk there should be a Magisk link if you open it this Procedure should run automatically
3. In Magisk Download MagiskHide Props Config, Download it and install it reboot.
4. Run in terminal on the device (i used Termux) the command "props" (without quotes) and select option 1 then select from the list Xiaomi and then Device Mi 10 Lite 5G Europe after that go back to main menu and select option 2 select again Mi 10 Lite 5G and nothing else
5. Reboot and check Safety Net it should get a pass if not you did something wrong
6. Download a Root File explorer (i used JRummys Root Explorer)
7. Copy the Audio Policy xml to your phone and replace the file on /vendor/etc to get Headphone Jack and Headset Mics working
8. Go to Settings - phh treble settings - Qualcomm Features and Tick use alternate audio policy
9. Go back to misc Features and tick disable audio effects this gets Notification and Alarm Sounds and Ringtone working.
10. Reboot
11. Check if Bluetooth works it should if not well i honestly dont know for sure
And your Device should run perfectly fine, its crazy fast and i got a 8h Screen on Time. Well thats for me good enough for now im back to cocking Custom Roms

I was struggling with this for a very long time and couldn't flash any GSI!! Thank you so much for this guide, I will try it now and give you a feedback, but where can I find the unsigned chinese drivers for windows? and do you think I can flash android 11 GSI`s like Phh on our device??

Honestly i dont know, it should work just try it. Worse that can happen is a bootloop. I added the Stock Recovery in First Post. And here is a link to the unsingned Xiaomi Driver use at your own risk!
https://c.mi.com/oc/thread-3312019-1-0.html

works perfectly, then I tried to flashing Bliss 14.0.3 and it booted up and worked and now I`m testing ProjectStreak android 11 GSI also boots and almost everything works except for the fingerprint sensor and A LOT of lag in the System UI! think I will revert back to Bliss 12.2 for now!
Thanks again!

I cannot receive SMS with Bliss.
@Legacyleader
I see that you are from Germany. I am also from Germany. Do you have Telegram?

Hi @Benni1123 yes i have telegram, SMS Problem could be solved via APN Settings. In my Case Drillisch had no APN setup after that it was working fine.

Legacyleader2 said:
Hi @Benni1123 yes i have telegram, SMS Problem could be solved via APN Settings. In my Case Drillisch had no APN setup after that it was working fine.
Click to expand...
Click to collapse
Hi Legacyleader you save this device, thanks

i can't seem to get any GSI rom to boot, alway's end up in a bootloop. My Monet Device is unlocked with the latest V12.0.3.0.QJIEUXM Rom.
It enters fastbootd (yellow letters) but when i enter fastboot -w i get error: segmentation fault.
If i flash system after this and reboot, i always end up in a bootloop (device boots to Mi logo and instantly reboots, goes back to mi logo, instantly reboots etc..)
It feels like im missing something obviously? ;-)
@Legacyleader2 do i need to wipe anything after the system flash? if i follow your steps i always end up bootlooping. Tried Andy's Lineage17.1 GSI, Phh AOSP GSI(v222), tried bless, bliss all of them are instant bootlooping. When i flash superpartition over it, system instantly boots stock rom.
Any idea what i'm doing wrong?

@Legacyleader2 look DM please

Hello,
Mi 10 Lite (Monet) owner here! (and new on XDA)
These detailed instructions almost convinced me to make the jump and flash a GSI on my phone purchased recently. It looks like the "standard" procedure for flashing a GSI ROM with fastbootd.
I know I can fallback on the official MIUI ROM in case of problem, but before flashing, I would like to ensure there is at least one GSI which can keep my phone working as a phone, with all basic features working good.
Could you please provide a feedback about your experience?
1) Which GSI did you try?
I am about to try phhusson LineageOS's GSI first, and if it does not work, I'll try Bliss as it looks like it works like a charm
2) How is the battery life affected?
I really enjoy the battery life with MIUI, I don't want it to be cut by two
3) Does the cameras (front, back, pictures/videos modes) still work?
4) Do calls and SMS work?
5) During calls, is the call audio quality good on both sides?
I had issues with some ROM on my previous phones like echos.
6) Does the fingerprint reader work?
Additionally, what about Bluetooth, NFC, speakers, audio output from jack, applications/games performance, ...?
Maybe we could create a post to summarize our successful experiences.
Thank you for your time

does someone successfully installed xposed in GSI bliss room thanks?

Hello everyone one!
I wanted to share my experience after this amazing guide, I managed to follow the guide and flash bliss GSI then I was flashed A LOT of different android 11 GSIs and I was using the AOSP 11 GSI for a week (everything was okay except for the fingerprint & Bluetooth audio).
Then I stumbled upon a MIUI 12 Global build based on android 11 for monet and I'm using it now for the oast week and it's pretty stable.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Does the vendor from this build affect flashing GSIs on this phone?
(Excuse my weak english)

Finally I have gone through GSIs.
On my working list.
1. Bless ver 224
2. Crdroid ver 224
3.Losq ver 224
4.Decendant X latest
I have not found any other gsi booting some body may add to the other GSIs booting.
I have not had any luck booting a port gsi.

Crdroid passes safety net out of the box.
For audio bug just tick alternative audio in phh settings and reboot.

Hmmm... I got HavocOS to work.
I used the vbmeta.img, dtbo.img and boot.img off of the latest Arrow rom (Arrow-v11.0-monet-OFFICIAL-20210412-VANILLA.zip), and then flashed the HavocOS GSI image to system, and it... didn't bootloop! It actually booted! Everything seems to work.
I just got it to run, so I'll have to play around a bit before I can give any definite guarantee, but so far everything seems fine. 5G is there as well.
Well, fingerprint doesn't work. Darn.
The two I've gotten to work are:
https://download.havoc-os.com/arm64-ab/Havoc-OS-v4.1-20210208-arm64-ab-Official.img.xz
https://download.havoc-os.com/arm64-ab/Havoc-OS-v4.1-20210208-arm64-ab-Official-GApps.img.xz

Development [ROM][12.0][OFFICIAL][ALIOTH/ALIOTHIN] Descendant 12

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Descendant is a customised Android ROM that focuses on enhancing UX and UI
over stock Android along useful features.
Downloads
Head to the download page.
Sources
Github
Do the format data
Flash firmware , min fw 12.5.5.0
Reboot to recovery
Flash Descendant
No wipes are needed between updates from Descendant itself, unless specified.
Official twrp can be used to flash it.
Listing all the additions would be a huge wall of text, that you wouldn't even read.
So, head over the Telegram group and feel free to lurk.
Preloaded applications
Google Apps are included.
Having a bug or not booting for whatever reason?
Look for "How to report bugs" on this post.
Bug reports without logs will be ignored.
@phhusson | @Letzen | @krule031 | @ezio84 | @linuxct
Android OS version: 12.0.0_r20​

Not available for Poco F1 as of now.. I will be waiting..

debadri1995 said:
Not available for Poco F1 as of now.. I will be waiting..
Click to expand...
Click to collapse
why should it concern me? Ask support into your community.

How on my A127F samsung A12

@manuelbianco Bro just ignore these people

@manuelbianco
the instructions say:
Do the format data
Flash firmware from here
after flashing the firmware a reboot? if so where to? Or simply flash the rom afterwards?

beautiful firmware, but there are some serious bugs. screen to freeze on reboot when the bluetooth device is connected. the interface lags a lot when you watch vanced YouTube.and 60% charge per night, with always on, that's a lot

let me try this. lemebackupfirst

beicuxhaven said:
@manuelbianco
the instructions say:
Do the format data
Flash firmware from here
after flashing the firmware a reboot? if so where to? Or simply flash the rom afterwards?
Click to expand...
Click to collapse
After flash fw reboot recovery, i missed will add

Hi,
I would like to say a big thank you to
manuelbianco and the Descendant team for this great rom,​after trying many other roms, yours stands head and shoulders above the rest.
Like most users, i was searching for a fast, stable and refined rom with the latest security patches,
the Descendant rom nailed it .
I have not found any bugs, but then i don`t use all the bells and whistles that my phone has to offer.
After many dirty flashes of different roms over the Xiaomi.eu A12 rom, i decided to start from a clean install.
Pre-install notes,
With my Bootloader already unlocked,
I copied all the files below, (except Xiaomi.eu V12 rom & TWRP fastboot toolkit) onto a USB memory stick and installed them via a OTG adaptor.
To enter Fastboot mode, hold down the Volume down & power buttons together.
How i installed the rom
1. I started with a clean install of the Xiaomi.eu V12, via Fastboot,
Choosing: windows fastboot first install with data format.Bat,
1a. I installed Xiaomi.eu V12 rom by putting my F3 into Fastboot mode
and running the .bat file above using my PC
2. Reboot the F3 into Fastboot mode and using a PC, install TWRP fastboot toolkit (FIXED)
3. install this Great Rom descendant_alioth-12.0-20211223-0951-RELEASE.zip
4. install OrangeFox recovery,
5. After OFox rebooted into recovery, i installed Magisk-v23.0
Safety net passes without Magisk, if you don`t require Root.
6. in Orangefox, i formatted data, by typing YES and re-booted.
7. after the initial start up and installing all my apps,
i then installed the brilliant Advanced Charging Controller (ACCA) ,
This rom is now my daily driver and for anyone wanting to know how fast this rom is, my AnTuTu score is 709661
Other AnTuTu scores were,
Arrow O/S A12, 679090,
Xiaomi.eu V12-12, 661033,
My Poco F3 is the 8gb/256gb EU version,
many thanks again ,
Johnr64.

@manuelbianco
one more question about the installation
you should make FORMAT DATA at the beginning....
But after that I have no connection to the PC. How should I now get the FW u the ROM to flash on the phone?

beicuxhaven said:
@manuelbianco
one more question about the installation
you should make FORMAT DATA at the beginning....
But after that I have no connection to the PC. How should I now get the FW u the ROM to flash on the phone?
Click to expand...
Click to collapse
Through sideload...

Never done this. Time to try.....

beicuxhaven said:
@manuelbianco
one more question about the installation
you should make FORMAT DATA at the beginning....
But after that I have no connection to the PC. How should I now get the FW u the ROM to flash on the phone?
Click to expand...
Click to collapse
Hi I tried to Format data via TWRP and Orange fox but i kept having a error,
installing Xiaomi.eu V12 rom in Fastboot mode and installed using the .bat file via my PC, worked a treat,
cheers.

manuelbianco said:
Through sideload...
Click to expand...
Click to collapse
Sorry, I forgot to mention that i used a OTG adaptor and a usb memory stick,
i have updated my post,
thank you again for a great rom

beicuxhaven said:
Never done this. Time to try.....
Click to expand...
Click to collapse
One thing i like especially with this rom compared to the Xiaomi.eu V12 is, i have my Samsung watch activated as a Trusted device and no more lock screen errors,
there are so many nice touches in this rom, it would take me all evening to list them,
just try this rom,
it`s a beast,
johnr64.

New build released!
Changelog:
- Restrict and align padding into status bar
- Fixed recycler view that won't show last two element of the thermal app list
- Fixed dup color options, and remove extra options

manuelbianco said:
New build released!
Changelog:
- Restrict and align padding into status bar
- Fixed recycler view that won't show last two element of the thermal app list
- Fixed dup color options, and remove extra options
Click to expand...
Click to collapse
Do banking apps work ok, I don't root, kinda worried to try just in case.

11214 said:
Do banking apps work ok, I don't root, kinda worried to try just in case.
Click to expand...
Click to collapse
Yes should be fixed was kernel, report pls

11214 said:
Do banking apps work ok, I don't root, kinda worried to try just in case.
Click to expand...
Click to collapse
All my banking apps work with v.0951 with out Magisk, i will download the latest update and report back is there are any issues with Safety net,
Updated to build 2301,
Banking apps are working as before, (Perfectly)
Many thanks
manuelbianco​for the latest update
and a Happy new year