Develop Bugs

Cases for the Bamboo OPO

I own a OnePlus One with the Bamboo back and as most people already know, it's actually quite thicker than the normal sandstone black and silk white backs and also a bit heavier. Because of this, most cases won't fit. I already tried putting on a naked clear case but my phone was too thick. Hopefully others with the Bamboo back could post here what cases would fit so we can put together a sort of list of confirmed cases that fit the Bamboo OPO.

kylethelife said:
I own a OnePlus One with the Bamboo back and as most people already know, it's actually quite thicker than the normal sandstone black and silk white backs and also a bit heavier. Because of this, most cases won't fit. I already tried putting on a naked clear case but my phone was too thick. Hopefully others with the Bamboo back could post here what cases would fit so we can put together a sort of list of confirmed cases that fit the Bamboo OPO.
Click to expand...
Click to collapse
I was debating to open a thread for this too, but here, I have these cases:
6x Aluminium Bumper Case (no SIM slot)
4x Ringke Fusion Case
2x Orzly Fusion "Bumper" Case
1x TUDIA Slim Fit Dual-Layer Cygen
1x TUDIA Ultra Slim LITE TPU Bumper
1x Diablo Jkase Rugged Case
Aluminium Bumper Case: I wouldn't use these because I don't want to damage the plastic on the side of the phone, as well as get my bamboo scratched. But it does fit, screws require a bit more pressure for locking in, which brings me to my original point, I don't want to damage the orange-ish plastic.
Ringke Fusion Case: I'm using this on my Daily Driver OnePlus One (Bamboo) atm, as well as my developer OnePlus One (sandstone) - I love these cases, it feels so high quality and fits around the device well. As you can see, I have 4 because two of them were the first batch which were quite loose.
Orzly Fusion "Bumper" Case: Rubbish. It doesn't shape around the edges of the phone and the lips of the "lay-on-the-table" design is so loose, I'd toss these out if I were you.
TUDIA Slim Fit Dual-Layer Cygen: Fits, but as usual the flaws are that the hard plastic does not align properly with the TPU is more obvious than on the Sandstone. Bad first batch, but not for everyone - as the manufacturing line is different.
TUDIA Ultra Slim LITE TPU Bumper: I have the clear version to show off the back. It looks good, and fits very well. As usual, clear displays the bamboo design quite well.
Diablo Jkase Rugged Case: It was a rather "loose" case to begin with, so it fits well with the bamboo styleswap/bamboo device. However, why would you buy a case to cover your bamboo anyways?

nicholaschum said:
I was debating to open a thread for this too, but here, I have these cases:
6x Aluminium Bumper Case (no SIM slot)
4x Ringke Fusion Case
2x Orzly Fusion "Bumper" Case
1x TUDIA Slim Fit Dual-Layer Cygen
1x TUDIA Ultra Slim LITE TPU Bumper
1x Diablo Jkase Rugged Case
Aluminium Bumper Case: I wouldn't use these because I don't want to damage the plastic on the side of the phone, as well as get my bamboo scratched. But it does fit, screws require a bit more pressure for locking in, which brings me to my original point, I don't want to damage the orange-ish plastic.
Ringke Fusion Case: I'm using this on my Daily Driver OnePlus One (Bamboo) atm, as well as my developer OnePlus One (sandstone) - I love these cases, it feels so high quality and fits around the device well. As you can see, I have 4 because two of them were the first batch which were quite loose.
Orzly Fusion "Bumper" Case: Rubbish. It doesn't shape around the edges of the phone and the lips of the "lay-on-the-table" design is so loose, I'd toss these out if I were you.
TUDIA Slim Fit Dual-Layer Cygen: Fits, but as usual the flaws are that the hard plastic does not align properly with the TPU is more obvious than on the Sandstone. Bad first batch, but not for everyone - as the manufacturing line is different.
TUDIA Ultra Slim LITE TPU Bumper: I have the clear version to show off the back. It looks good, and fits very well. As usual, clear displays the bamboo design quite well.
Diablo Jkase Rugged Case: It was a rather "loose" case to begin with, so it fits well with the bamboo styleswap/bamboo device. However, why would you buy a case to cover your bamboo anyways?
Click to expand...
Click to collapse
Wow! That's solid helpful. The one I wanted to get but didn't fit when I tried it on was the Bepak Slim Transparent Case so stay away from that if you've got the bamboo. I really wanted a clear case coz I didn't want to cover the Bamboo but after trying the Bepak case I didn't think any slimfit clear case would fit. Glad to hear the Ringke Fusion Case fits! Do you have the clear one? I think I might just order one.

nicholaschum said:
I was debating to open a thread for this too, but here, I have these cases:
6x Aluminium Bumper Case (no SIM slot)
4x Ringke Fusion Case
2x Orzly Fusion "Bumper" Case
1x TUDIA Slim Fit Dual-Layer Cygen
1x TUDIA Ultra Slim LITE TPU Bumper
1x Diablo Jkase Rugged Case
Aluminium Bumper Case: I wouldn't use these because I don't want to damage the plastic on the side of the phone, as well as get my bamboo scratched. But it does fit, screws require a bit more pressure for locking in, which brings me to my original point, I don't want to damage the orange-ish plastic.
Ringke Fusion Case: I'm using this on my Daily Driver OnePlus One (Bamboo) atm, as well as my developer OnePlus One (sandstone) - I love these cases, it feels so high quality and fits around the device well. As you can see, I have 4 because two of them were the first batch which were quite loose.
Orzly Fusion "Bumper" Case: Rubbish. It doesn't shape around the edges of the phone and the lips of the "lay-on-the-table" design is so loose, I'd toss these out if I were you.
TUDIA Slim Fit Dual-Layer Cygen: Fits, but as usual the flaws are that the hard plastic does not align properly with the TPU is more obvious than on the Sandstone. Bad first batch, but not for everyone - as the manufacturing line is different.
TUDIA Ultra Slim LITE TPU Bumper: I have the clear version to show off the back. It looks good, and fits very well. As usual, clear displays the bamboo design quite well.
Diablo Jkase Rugged Case: It was a rather "loose" case to begin with, so it fits well with the bamboo styleswap/bamboo device. However, why would you buy a case to cover your bamboo anyways?
Click to expand...
Click to collapse
Sorry, can I just confirm, is the Aluminium Case you mention first the one by kwmobile/KW-Commerce? And, if it is, you say you wouldn't choose it because of potential scratching, but do you think it's still a good case in that it protects the screen from being damaged?

TheMurphmeister said:
Sorry, can I just confirm, is the Aluminium Case you mention first the one by kwmobile/KW-Commerce? And, if it is, you say you wouldn't choose it because of potential scratching, but do you think it's still a good case in that it protects the screen from being damaged?
Click to expand...
Click to collapse
Yeah because that case is actually already very snug on the sandstone version of the OnePlus, with the added thickness at the back, it will scrape along the plastic and the bamboo (I had a lot of experience with aluminium bumpers with added thickness battery covers (Note 3 + Al bumper + Al battery cover) and the battery cover was scratches so much). It will protect your screen somehow (I did drop my sandstone OPO with a tempered glass on solid concrete and it was perfectly fine)

nicholaschum said:
Yeah because that case is actually already very snug on the sandstone version of the OnePlus, with the added thickness at the back, it will scrape along the plastic and the bamboo (I had a lot of experience with aluminium bumpers with added thickness battery covers (Note 3 + Al bumper + Al battery cover) and the battery cover was scratches so much). It will protect your screen somehow (I did drop my sandstone OPO with a tempered glass on solid concrete and it was perfectly fine)
Click to expand...
Click to collapse
Thanks for the information; think I'll give that one a miss then and go for the Tudia Ultra Slim instead

nicholaschum said:
Orzly Fusion "Bumper" Case: Rubbish. It doesn't shape around the edges of the phone and the lips of the "lay-on-the-table" design is so loose, I'd toss these out if I were you.
Click to expand...
Click to collapse
strongly disagree. I'd recommend Orzly Fusion bumper case. The fit is perfect, not too tight. Fits perfectly round the edges and definitely not loose on the 'lay-on-the-table' part. I also own Ringke & Diztronic.
Im pretty sure u got a bad batch of the Orzly, or maybe an early batch...

Sagar4995 said:
strongly disagree. I'd recommend Orzly Fusion bumper case. The fit is perfect, not too tight. Fits perfectly round the edges and definitely not loose on the 'lay-on-the-table' part. I also own Ringke & Diztronic.
Im pretty sure u got a bad batch of the Orzly, or maybe an early batch...
Click to expand...
Click to collapse
I would not, my two cases I ordered one month apart are exactly what KP Smith said in a comment here:
https://plus.google.com/u/0/app/basic/stream/z13awxcpole1eh1tf22uihs51zrfd3ssp
Sent from my Nexus 6 using Tapatalk VIP

Vassy's One+

Thank you for doing this review. Your post makes me want to try the TUDIA Ultra Slim LITE TPU Bumper.
Saw this review on it.
youtu.be/cd1O8LdeGUo

my diztronic tpu slim cases fit pretty good as well. you put them on like you would with the regular back then just run your fingers around the edges and it falls right into place. I have 4 different colors from different batches and all fit fine. I also have the ringke fusion.. its actually on my phone right now. Its got the clear back and tinted sides. Fits 99.9% perfectly! Its my go to case for sure.

Is RhinoShield worth it ?

Hello guys,
I got my OP3T from one week now, and i've been looking for various threads about cases.
I'm wondering wich one is the best by the RhinoShield, the spigen rugged Armor and the spigen Neo hybrid ?
I'd change my phone because i broke the screen and i dont want my OP3T to die like that .
Thanks

Alpha_Lex said:
Hello guys,
I got my OP3T from one week now, and i've been looking for various threads about cases.
I'm wondering wich one is the best by the RhinoShield, the spigen rugged Armor and the spigen Neo hybrid ?
I'd change my phone because i broke the screen and i dont want my OP3T to die like that .
Thanks
Click to expand...
Click to collapse
You'll struggle to find someone with all 3 to give an accurate review.
my suggestion is use youtube and work out which one best suits your needs.
this is what i did and i decided on the spigen rugged Armour case.(the neo hybrid wasn't available at the time).
ive dropped my phone twice and its survived both times. i also take it mountain biking so i goes through a lot..
it looks nice too.

I have the spigen rugged armor and its great, nice protection, confortable and it looks amazing!
If you want the best protection case buy rinho shield.

I was on galaxy s7 with rhinoshield bumper and i loved it...now i'm on 3T and i want to rebuy the rhinoshield but there are only 2/3 colors red excluded...i'm thinking in alternative to buy this in red color manufactured by diztronics
https://www.amazon.com/OnePlus-Diztronic-Matte-Slim-Fit-Flexible/dp/B01I3LK99E?th=1&psc=1

Colors are not a problem for me, i'm just looking for a good protective case
And what about flip covers ?

Alpha_Lex said:
Colors are not a problem for me, i'm just looking for a good protective case
And what about flip covers ?
Click to expand...
Click to collapse
I got the Nillkin Nature TPU case... its fantastic with the OnePlus 3T. Does it's job. The reason I bought this case is because I have the original OnePlus 3T Curved Screen Protector installed on it, and it's the only case that doesn't push the screen protector off its edges.
Here is a link if you want to see how it looks: http://www.nillkin.com/english/proshow.asp?mid=2&sid=0&tid=0&cid=1&scid=&id=6263&page=1
and
here is a video review of it: https://www.youtube.com/watch?v=xMIagklQJjw

Rhino shield user here. I've used various Spigen on other phones. My favourite case of all time, which I used on a Note 5, was the Ringke fusion, but that wasn't available when I got my 3T, is available now and at a good price.
I like the Rhino because it's minimal and you can still feel the lovely bare metal of the body and appreciate the colour of the back. I have dropped my phone a couple of times and it landed face down and has remained unmarked, If you like to swap cases, then stay away from the Rhino, it's too much of a pain to keep removing. I've also found the slider has missed a couple of times - no big deal. Also, the cut outs limit the width of the head phone jack and charging cable (the original cable is fine).
Personally, I think the Rhino is over priced (£22 in the UK).
Although I'm not unhappy with the Rhino & don't regret buying it, I'd probably go Ringke fusion from Amazon for every day use and Spigen slim armour when I want more protection.
Hope that helps.

I use "Shock proof case with stand"
Let it be any company/brand, everything is just the same, I'd remove the stand and use it as a normal case which is very sturdy at the edges, I use this type of case for all my mobiles Moto g2, Moto g4 plus, Oneplus 3T. Cheers
https://www.amazon.com/OnePlus-Shockproof-Rugged-Protective-Kickstand/dp/B01FVA9SG0/ref=sr_1_3?ie=UTF8&qid=1487722758&sr=8-3&keywords=shockproof+case+for+oneplus3

I have both Spigen Rugged Armor and RhinoShield Crashguard.
I once dropped my 3T when it's in Spigen with screen facing down the concrete (it slipped from my hand when I took it out from my jeans tight pocket) and fortunately, the screen survived without any cracks.
I don't have a chance yet to drop my 3T when it is in RhinoShield (I don't want to. LoL). But my personal favorite (and current daily case) is RhinoShield because of its open back design so I can feel the 3T "space grade" alumunium casing
However, with RhinoShield at first you gonna feel that it is too hard to remove and re-install the bumper. But if you watch carefully their official video guide on how to remove and install this case you should be fine. Now I can remove and install this bumper with ease.
Also, another downside is, I cannot use my Sennheiser HD202 headphone with Rhino installed, my other headphone is Audio Technica ATH-M50x is just fine.

Deleted

Mine is tudia tamm rugged carbon fiber texture case, dopped my phone 2x while typing, slipped from hands while taking it out from my pocket but nothing happen to my 3t phone, not even a scratch on the display, got no screen protector, i pulled the pre applied screen protector as it doesnt work well with the tudia case

I finally bought the Spigen rugged Armor with Orly screen protector. I have a good feeling with it but i'll maybye buy the RhinoShield later.
I'm still taking your opinion if some one else want to buy it !

The Rhino shield is very tough, but there is a down side, it is really really slippery. Also it it very very hard to take off.
I returned mine got the Spigen rough armor and i like it better. Not as slippery
Sent from my ONEPLUS A3000 using XDA-Developers Legacy app

@rhinoshield crash bumper was great, but my only downside was. thr qrphone cannot fit. too small

Do you guys know any tempered glass that can fit with the rhinoshield bumper case ?

[REQ] Spigen Neo Hybrid Case "After a while review"

Hi im looking to decide between the Spigen Neo Hybrid and Spigen rugged armor. I have read many reviews but none of them seems legit, so any user who have any of these cases please confirm this for me:
SPIGEN NEO HYBRID:
1. Does the sides of the plastic bumper tuns yellow after a while of use like a month or two? and if it does looses its color can i buy the bumper separately?
2. Does it provide better protection on drops as compared to the rugged armor?
SPIGEN RUGGED ARMOR:
1. Is the case too slippery?
2. How is the drop protection on this case?
I'm looking for protection over looks so please help me make a valid choice, and if you think that both the cases sucks feel free to suggest me the one you prefer.
Thanks in advance.

Hi, I have the Spigen Rugged Armor, this case is good looking if you don't mind that the OnePlus logo is hidden with this case. This case also have a good grip and good drop protection.
I once dropped my 3T while using this case with the screen facing down the concrete. Fortunately, this case protected my screen from shatter. I recommended you get this case if you spend majority of your work outside office. Better safe than sorry.

I bought the Rugged Armor and I have to say I'm really impressed. It's thin, feels great and definitely isn't too slippery. The carbon fiber looks good too. The only issue is I'm not sure how much drop protection it would provide because like I say it is very thin. There's a lip over the screen but I can imagine the phone becoming disfigured underneath if it was dropped from an appreciable height. I'm usually quite careful though so I'm trying not to worry about that

Thanks for the reply guys I was slightly inclined towards the rugged armor my self, it looks frekin awesome. I'll go for it then.

Currently using the Spigen rugged armour as I was afraid of finger prints with the clear variant. Not as slippery as I expected and gives all the protection you need, saved my phone from a couple of drops and it is scratch free

I'm actually using both. I initially only had the rugged armor and then bought the Neo hybrid. I found with a glass screen protector the Rugged armor doesn't play well with it. With just a plastic screen protector the Neo hybrid looks really nice. I love em both though

I have one and it's not really a good "feel" for me. It's a great case, just not to my liking. I am rocking this one now: OnePlus 3T Case, OnePlus 3 Case, Nillkin Synthetic Fiber Premium Bumper Case Cover [Compatible with Magnetic Car Holder] for OnePlus 3T / 3 - Black. It's a lot like the OEM and fits great. With that and the LiquidSkin protector, I really like the slimness and the feel.

Been using the rugged armor for about a month.
- Not slippery
- Good protection
- Not too thick
- I think the CF is stupid. I want it plain.
9/10 would buy again.

Aukrus said:
SPIGEN NEO HYBRID:
1. Does the sides of the plastic bumper tuns yellow after a while of use like a month or two? and if it does looses its color can i buy the bumper separately?
2. Does it provide better protection on drops as compared to the rugged armor?
Click to expand...
Click to collapse
Have had the OP3T with that case for 2 months now
1. No they don't. I just have one little scratch on the corner revealing a small white line (barely visible)
2. No idea since I haven't dropped the phone a single time. I can just say that the bumper makes the case kind of more slippery actually. Previously I rocked Spigen Ultra Hybrid on Nexus 5/Nexus6/Galaxy S6 and it was much more grippy. I felt much safer while for example on a bus, now I aim to hold it with two hands since I don't feel the grip this well. The Neo's advantage over Ultra Hybrid though, is the fact that the whole product is relatively soft and flexible so that it doesn't damage the device at all as UH used to with its back made of hard solid plastic.
9/10 very decent, non-bull**** and SOLID case anyway. Totally recommend it, the notices above are just the matter of my fussiness

Protective Case

I always rock an Otterbox Commuter case on my phones mainly for work conditions can get rough at times. From what I've seen, Otterbox is only offering their Defender series (too big and bulky) and their Symmetry series (thinner, one piece case). I've decided to go with the Symmetry series and I'm pleasantly surprised. It definitely adds a little bit of bulk, but not as much as the Commuter, while offering great all-around protection. The one piece design is easy to put on and remove (unlike previous Symmetry cases I've tried on other phones). I do wish that there was a bit of grip on the sides like the Speck Presidio series cases, but I like the design. Unfortunately the only options were clear, pink, or black.... so I went with black.
So what's your choice for a protective case? Share pics and comments.

I too normally use the Otterbox defender for my phones but I wanted to try something new. I bought a poetic revolution for myself and a supcase unicorn beetle pro for my wife. They appeared a little slimmer and had port covers which I wanted. Amazon says they will arrive tomorrow so I shall see.

holden56 said:
I too normally use the Otterbox defender for my phones but I wanted to try something new. I bought a poetic revolution for myself and a supcase unicorn beetle pro for my wife. They appeared a little slimmer and had port covers which I wanted. Amazon says they will arrive tomorrow so I shall see.
Click to expand...
Click to collapse
I had the unicorn beetle pro for my Nexus 6 and it's a nice cheaper alternative to the defender, but it still adds more bulk than the commuter case. I may look into the poetic case though. Let me know how they work out for you. ?
I went to Best Buy and tried out the Defender case. Definitely too bulky and I hate the built in screen protector (and it doesn't sit well over a glass screen protector, even if you take out the built in one).

You may not like the poetic as it has the built in screen protector. I'm used to the bulk of the defender so I'm not a great judge of the size. I will tell you the poetic is smaller then the supcase unicorn beetle. Built in port covers are nice too, overall it is a smaller rugged case you can say.

just received the Poetic Karbon Shield Slim Fit Case With Anti-Slip Side Grip and Carbon Fiber Texture. it's a slimmer-fit case that offers (what i believe is) more protection than a thin TPU case. sharing pictures for those interested to know how it fits the G6. i also have tempered glass screen protector on the phone as well. you'll also notice in the first pic that wireless charing works with the case on the phone. i usually go with a much thinner case but i really like the look and feel of this one. will give it a week or so before i decide if it's a keeper. (please excuse the dust in the pictures - our HVAC ducts were being cleaned when i took these pictures).

Went from a Note 3 with Otterbox Commuter to a G6 with Spigen "Tough Armor" case, and am satisfied with it. Feels like it provides just as much protection as the Otterbox Commuter, yet not adding quite as much bulk. I'm kinda rough with my phones sometimes, and I'd have peace of mind if I were to accidentally drop my G6 from waist-height or so.
If you choose to go with Spigen, definitely buy it off Amazon, rather than directly from Spigen's website; it's cheaper off Amazon.

cortez.i said:
just received the Poetic Karbon Shield Slim Fit Case With Anti-Slip Side Grip and Carbon Fiber Texture. it's a slimmer-fit case that offers (what i believe is) more protection than a thin TPU case. sharing pictures for those interested to know how it fits the G6. i also have tempered glass screen protector on the phone as well. you'll also notice in the first pic that wireless charing works with the case on the phone. i usually go with a much thinner case but i really like the look and feel of this one. will give it a week or so before i decide if it's a keeper. (please excuse the dust in the pictures - our HVAC ducts were being cleaned when i took these pictures).
Click to expand...
Click to collapse
I almost went with this case but I got this one instead. It's the Caseology.

This Poetic has been great for me after a few days of use. Lightweight, decent protection, and good grip.
Poetic Affinity Slim Fit for LG G6 Clear Case With Anti-Slip Side Grip and Reinforced Corner Protection Bumper for for LG G6 Black/Clear https://www.amazon.com/dp/B06W5K3YWF/ref=cm_sw_r_cp_apa_N4v7ybREB4YDC

I wanted to order Poetic but they don't ship to EU and i get Ringke Fusion but still waiting for the phone.

cortez.i said:
just received the Poetic Karbon Shield Slim Fit Case With Anti-Slip Side Grip and Carbon Fiber Texture. it's a slimmer-fit case that offers (what i believe is) more protection than a thin TPU case. sharing pictures for those interested to know how it fits the G6. i also have tempered glass screen protector on the phone as well. you'll also notice in the first pic that wireless charing works with the case on the phone. i usually go with a much thinner case but i really like the look and feel of this one. will give it a week or so before i decide if it's a keeper. (please excuse the dust in the pictures - our HVAC ducts were being cleaned when i took these pictures).
Click to expand...
Click to collapse
I just ordered this one on Amazon. Saw the office and couldn't pass it up. Glad to see it looks good, and works well with a glass protector. I got the Spigen glass 2 pack as I've always liked everything Spigen makes.
Was gonna get the unicorn beetle that I had for my s7e, but don't think I need that much protection on this one, plus no edge screens that I need to prevent my palm from hitting lol.
Update: I hate the Karbon case. Doesn't fit tightly and leaves gaps at the edges on the front. I guess for $8 it'll hold me over until I get a good case, but this one is not staying pass this weekend.
Sent from my LG-H872 using Tapatalk

I would go for the Spigen Rugged Amor, it’s much slimmer and provide pretty much the same protection as the symmerty series http://www.the-reviewr.com/best-lg-g6-case/

Had that rugged armor for my v20 and loved it. Decided to go with the neo hybrid for the g6
Spigen Neo Hybrid LG G6 Case Herringbone with Flexible Inner Protection and Reinforced Hard Bumper Frame for LG G6 (2017) - Gunmetal https://www.amazon.com/dp/B01N4QCEHA/ref=cm_sw_r_cp_apa_2o68yb7SMM8C1

djjroc007 said:
Had that rugged armor for my v20 and loved it. Decided to go with the neo hybrid for the g6
Spigen Neo Hybrid LG G6 Case Herringbone with Flexible Inner Protection and Reinforced Hard Bumper Frame for LG G6 (2017) - Gunmetal https://www.amazon.com/dp/B01N4QCEHA/ref=cm_sw_r_cp_apa_2o68yb7SMM8C1
Click to expand...
Click to collapse
Do you have pics of what it looks like on your phone?
Thanks!

So guys I'm searching for a good protective case that doesn't add too much bulk. I'm torn between the Poetic Revolution and the Supcase Unicorn Beetle. I like the way the Poetic looks except for the cutout on back, I prefer the Unicorns Cutouts. If anyone here has any pics to share, that be awesome. Or unless someone has another case to throw in the mix. THanks

Question What Pixel 6 pro case are you using?

So which case did you slap on your P6P??
This is the one I went with:
Spigen Tough Armor Designed for Google Pixel 6 Pro Case (2021) - Gunmetal https://www.amazon.com/dp/B0964K3MC...abc_3RQGNKN66PQ135AY4PAA?_encoding=UTF8&psc=1

Using
Caseology Parallax Protective Case Compatible with Google Pixel 6 Pro Case (2021) - Sage Green https://www.amazon.com/dp/B096T7HP7...abc_YAT59QC2KRBVWZ3SQZNC?_encoding=UTF8&psc=1
Love it so far..but I'd like more variety

ricanxd said:
So which case did you slap on your P6P??
This is the one I went with:
Spigen Tough Armor Designed for Google Pixel 6 Pro Case (2021) - Gunmetal https://www.amazon.com/dp/B0964K3MC...abc_3RQGNKN66PQ135AY4PAA?_encoding=UTF8&psc=1
Click to expand...
Click to collapse
I did the same, but black.

My daily case
Pixel 6 Pro Case (Cyber Edition)
Every Latercase is made with Dupont™ Kevlar®. The aramid fibers are hand-laid by master craftsmen, precision-formed to fit your Pixel 6 Pro, then laser-cut to perfection. Latercase is easy to put on, easy to take off, and coated with a durable matte finish that's addictive to touch. Oh - and...
latercase.com
Pre-ordered. Thinking this'll have a brown leather color with the Kevlar pattern. Don't know when it'll be shipped.
Latercase: Impossibly thin phone cases.™
The world's thinnest phone case, made using 100% premium Kevlar®. Thinner than a penny. Lighter than a pencil. 5x stronger than steel. Coated with a durable, grippy matte finish that's addictive to touch. Designed in Toronto, trusted by 100K+ tech enthusiasts around the world.
latercase.com
Google Golden Glow case that has an ETA of December 6-7
Pixel 6 Pro Case
store.google.com
For when I want to show my Sorta Sunny color
https://www.amazon.com/dp/B0964GCFRY/ref=cm_sw_r_apan_glt_fabc_NP2NE40QKDE217FGTKXS?_encoding=UTF8&psc=1

I went with the otterbox defender pro. Always love the durability that comes with the case. Though I miss the looks of other cases.

EeZeEpEe said:
My daily case
Pixel 6 Pro Case (Cyber Edition)
Every Latercase is made with Dupont™ Kevlar®. The aramid fibers are hand-laid by master craftsmen, precision-formed to fit your Pixel 6 Pro, then laser-cut to perfection. Latercase is easy to put on, easy to take off, and coated with a durable matte finish that's addictive to touch. Oh - and...
latercase.com
Pre-ordered. Thinking this'll have a brown leather color with the Kevlar pattern. Don't know when it'll be shipped.
Latercase: Impossibly thin phone cases.™
The world's thinnest phone case, made using 100% premium Kevlar®. Thinner than a penny. Lighter than a pencil. 5x stronger than steel. Coated with a durable, grippy matte finish that's addictive to touch. Designed in Toronto, trusted by 100K+ tech enthusiasts around the world.
latercase.com
Google Golden Glow case that has an ETA of December 6-7
Pixel 6 Pro Case
store.google.com
For when I want to show my Sorta Sunny color
https://www.amazon.com/dp/B0964GCFRY/ref=cm_sw_r_apan_glt_fabc_NP2NE40QKDE217FGTKXS?_encoding=UTF8&psc=1
Click to expand...
Click to collapse
I love the later case but I cracked my pixel 4xl screen because of the case. How's the edge protection?

https://www.amazon.com/dp/B09BZ9ZR9H?psc=1&ref=ppx_yo2_dt_b_product_details
Love this one.

Is the lip of the spigen tough armor equal on all 4 sides? or does it dip like most others? I guess because of the curved sides it has to dip? Hybrids and Caseology both are not raised up at the sides.

Alekos said:
Is the lip of the spigen tough armor equal on all 4 sides? or does it dip like most others? I guess because of the curved sides it has to dip? Hybrids and Caseology both are not raised up at the sides.
Click to expand...
Click to collapse
It's raised on the top and bottom but not on the sides. But still plenty of clearance when you put your phone face down on a flat surface with a glass screen protector on it.

Alekos said:
Is the lip of the spigen tough armor equal on all 4 sides? or does it dip like most others? I guess because of the curved sides it has to dip? Hybrids and Caseology both are not raised up at the sides.
Click to expand...
Click to collapse
The sides are raised but the top and bottom have a slight higher lip.

Super slim case that means phone feels great in hand like there is no case fitted
X-level Google Pixel 6 Pro Case,... https://www.amazon.co.uk/dp/B09F2VF65V?ref=ppx_pop_mob_ap_share

The official overpriced piece of junk from Google. Thought it'd be similar in quality to the fabric case I had on my 4XL. Nope - it's no better than a $10 case from Amazon. Too lazy to return it.

I'm using the official case, which looks great but is very slippery. I'm gonna look for something with better grip.

ricanxd said:
I love the later case but I cracked my pixel 4xl screen because of the case. How's the edge protection?
Click to expand...
Click to collapse
You cracked it because of a fall in the case? I actually did that with my 4 XL in a Latercase but that's my fault cause it was on my lap. Edge protection is the same. It's only as thick/thin as the case is and the top, bottom, and buttons are open. It's more of an increase grip, scratch, and drop to a rug/carpeted area protection type of case for me.

Goodbye case, hello Dbrand.

spotmark said:
Goodbye case, hello Dbrand.
Click to expand...
Click to collapse
very sharp looking!
I'm really liking my rhinoshield solidsuit. Looks and feels good.
And it gives me some confidence when my old hands inevitably drop this beauty.
Lmao!!

I ordered both the Spigen Tough Armor and the CYRILL Stone. The Tough undoubtedly offers better protection (it's better padded and provides better protection around the edges of the screen), but, understandably, it's a lot bulkier. It makes an already big phone feel enormous. The Cyrill is much sleeker, so that's what I'm using daily. The phone just feels a lot better in the hand with the Cyrill than with the Tough Armor. Additionally, the edges of the Cyrill don't rise as high along the sides of the screen. This is bad because it doesn't offer as much protection for the screen, but it's good because it provides a much nicer experience when swiping/scrolling on the edges. The buttons on the Cyrill are also better. All of the buttons on the Tough Armor are raised to the same level in an almost unbroken line, making hard to find them by touch.
I may swap the out for the when I'm doing something that risks the phone more than usual, but I think the Cyrill is probably fine for daily use.
In case folks haven't seen it, Android Police has a nice rundown of some their favorite cases for the P6Pro:
https://www.androidpolice.com/best-google-pixel-6-pro-cases/

I happened to have a bellroy voucher so ended up with their official leather case . Really happy actually, feels good, gives good grip, offers more protection than I thought with a good lip around the screen. Lovely soft inside , side buttons are really good .

Caseology Parallax

Really wish Pitaka would make one like they did for the Pixel 3/4 series, https://www.ipitaka.com/collections/magez-case-for-google-pixel-4. I asked and they said no.