Related
DELETE
DELETE
Reserved
For Indian Users +8.1 AOSP Users
If Jio 4g voice is offline Turn on Location and it will work
P.s Turn on location in Battery saver mode it will not consume more battery then.
Regards~
Great, I'll check this in few days Before this i have questions
Magisk works on this rom?
Can i return to nougat roms?
bohdankrulik said:
Great, I'll check this in few days Before this i have questions
Magisk works on this rom?
Can i return to nougat roms?
Click to expand...
Click to collapse
magisk is not working ? for now
---------- Post added at 01:49 AM ---------- Previous post was at 01:07 AM ----------
Treble Support Included
You can now flash any GSI Image on This TWRP
detailed Instructions on it will be added later ?
Regards~
Proximity sensor does not work
Earpiece volume is too low. Having trouble listening to calls.
And yes safetynet passes. I am able to use Google Tez and Snapchat.
mthepa said:
Proximity sensor does not work
Click to expand...
Click to collapse
it works just need to be calibrated
After installing this TWRP oreo, the screen does not work
I know you understand how important is to upload a source code of your rom. Because all your work based on a source code from other contributors of MTK community that they provided for everyone. Your rom can even has my code (just because one of the people you mentioned used it). So I think it is important to share the code with the community. It will helps to fix bugs and create new roms in the future. And it will be fair for all people have been making roms before you. Also some people (like me) want to make enchancements to original code from Android vendors but it will be impossible without source. I hope you understand my position and will make needed acions once you will be ready to show it for the public.
stanislavskiy said:
I know you understand how important is to upload a source code of your rom. Because all your work based on a source code from other contributors of MTK community that they provided for everyone. Your rom can even has my code (just because one of the people you mentioned used it). So I think it is important to share the code with the community. It will helps to fix bugs and create new roms in the future. And it will be fair for all people have been making roms before you. Also some people (like me) want to make enchancements to original code from Android vendors but it will be impossible without source. I hope you understand my position and will make needed acions once you will be ready to show it for the public.
Click to expand...
Click to collapse
there are some personal reasons for not opening device tree and vendors please understand also treble support is there so
any GSI image will bootup without issue so ahead from this I don't think no more roms needed also kernel sources are already there.
Regards~
murtaza1326 said:
there are some personal reasons for not opening device tree and vendors please understand also treble support is there so
any GSI image will bootup without issue so ahead from this I don't think no more roms needed also kernel sources are already there.
Regards~
Click to expand...
Click to collapse
My message was for Dinolek
And Treble support is good but not enough if you want to build a rom for yourself because Dinolek made changes for core system libraries/frameworks. And kernel is not a problem at all. The problem was to make everything working on system-level and Dinolek did it. That's awesome.
stanislavskiy said:
My message was for Dinolek
And Treble support is good but not enough if you want to build a rom for yourself because Dinolek made changes for core system libraries/frameworks. And kernel is not a problem at all. The problem was to make everything working on system-level and Dinolek did it. That's awesome.
Click to expand...
Click to collapse
i replied on his behalf only he have exams i was also there when he was bringing up this project now i openly say why sources are hidden you know lunik he charges money for developing roms also he didn't provided credits to patches owner dinolek did it for us i know other developers also want this but if all sources goes out i am damn sure lunik will copy his work and earn money from it so sources are not open tho kernel sources with modifications are out you can bringup with that kernel
stanislavskiy said:
I know you understand how important is to upload a source code of your rom. Because all your work based on a source code from other contributors of MTK community that they provided for everyone. Your rom can even has my code (just because one of the people you mentioned used it). So I think it is important to share the code with the community. It will helps to fix bugs and create new roms in the future. And it will be fair for all people have been making roms before you. Also some people (like me) want to make enchancements to original code from Android vendors but it will be impossible without source. I hope you understand my position and will make needed acions once you will be ready to show it for the public.
Click to expand...
Click to collapse
Source will be uploaded when rom get to beta stage.
I'm not using clear aosp sources, I based on Mediatek alps 8.1 source code, that's why it's hard to share it in proper way.
Nothing is based on work from other contributors, except maintained ones.
Stuck at boot animation
Test results
So i have tested this rom in my phone fr 2 days & i gt a result ...
What doesn't work
_________________
1)No navigation bar(no option to switch)
2)It doesn't restart (only power offs if u click on restart)
3)Power button doesn't work when u want to switch on the device
4)Proximity sensor error
5)gyroscope sensor error
6)Apps booting time is very slow
7)low ear-peace & speaker vol
8)Magisk error(if u flash magisk it stucks in boot-loop)
9)Physical home & back button doesn't work
10)Headphone sound output is bad
11)It takes more time to install an app
12)Camera is avg
13)2nd time if ur flashing this os it just says No OS INSTALLED while booting the device.
14)Call quality is not that much gud (avg)
What works fine
______________
1)OS booting & installing time is very fast
2)Battery management is very good
3)Ram management is very good
4)Wifi, hotspot, celular data, bluetooth tethering, USB tethering works fluently
5)location is very accurate
6)some of the basic sensors works
7)Touch works very well
8)very less heating issues
This are the results i gt in the testing of this rom in my device thanks to the developer nd all the persons who are been works on this
Cheers SAM.J
SAM.J said:
So i have tested this rom in my phone fr 2 days & i gt a result ...
What doesn't work
_________________
1)No navigation bar(no option to switch)
2)It doesn't restart (only power offs if u click on restart)
3)Power button doesn't work when u want to switch on the device
4)Proximity sensor error
5)gyroscope sensor error
6)Apps booting time is very slow
7)low ear-peace & speaker vol
8)Magisk error(if u flash magisk it stucks in boot-loop)
9)Physical home & back button doesn't work
10)Headphone sound output is bad
11)It takes more time to install an app
12)Camera is avg
13)2nd time if ur flashing this os it just says No OS INSTALLED while booting the device.
14)Call quality is not that much gud (avg)
What works fine
______________
1)OS booting & installing time is very fast
2)Battery management is very good
3)Ram management is very good
4)Wifi, hotspot, celular data, bluetooth tethering, USB tethering works fluently
5)location is very accurate
6)some of the basic sensors works
7)Touch works very well
8)very less heating issues
This are the results i gt in the testing of this rom in my device thanks to the developer nd all the persons who are been works on this
Cheers SAM.J
Click to expand...
Click to collapse
Thanks for feedback.
About 2 and 3, install latest 6.2.0.0G from flyme site, not twrp one.
For 4 flash the fix from rom download link fix_alsps_mblu2_oreo.zip, it will be included in next update.
About 5, we don't have gyroscope, on other firmwares it is emulated from magnetometer.
What do you mean in 9?
To disable hardware keys and enable software flash zip from faq.
SAM.J said:
So i have tested this rom in my phone fr 2 days & i gt a result ...
What doesn't work
_________________
1)No navigation bar(no option to switch)
2)It doesn't restart (only power offs if u click on restart)
3)Power button doesn't work when u want to switch on the device
4)Proximity sensor error
5)gyroscope sensor error
6)Apps booting time is very slow
7)low ear-peace & speaker vol
8)Magisk error(if u flash magisk it stucks in boot-loop)
9)Physical home & back button doesn't work
10)Headphone sound output is bad
11)It takes more time to install an app
12)Camera is avg
13)2nd time if ur flashing this os it just says No OS INSTALLED while booting the device.
14)Call quality is not that much gud (avg)
What works fine
______________
1)OS booting & installing time is very fast
2)Battery management is very good
3)Ram management is very good
4)Wifi, hotspot, celular data, bluetooth tethering, USB tethering works fluently
5)location is very accurate
6)some of the basic sensors works
7)Touch works very well
8)very less heating issues
This are the results i gt in the testing of this rom in my device thanks to the developer nd all the persons who are been works on this
Cheers SAM.J
Click to expand...
Click to collapse
2nd,3rd and 9th option from not working are working fine on my device.
Thank you very much for the firmware!
MIUI-Pro ROM(V8) ported For msm8916 & snapdragon 410 devices like LYF Wind 3(LS-5502)
Hey Guys!
Its Amit,
I recently decided to bring back the dead soul of my old phone with the help of custom ROM's.When I searched for my phone i.e LYF Wind 3(LS_5502) on google i came with no result except for the TWRP Recovery.
By the way, my phone's i.e--LYF Wind 3(LS-5502) android version is lollipop V5.1.1. It's running stock android provided by the LYF company till then no updates,no security patches and no-nothing.
Then I decided to port ROM for my phone with the help of millions of tutorials and guide & also with intense work.
I finally had made a stable custom Rom-----MIUI-Pro Miui 8 on top of lollipop-V5.1.1.
It has following features:----->
VOLTE Working{Added option to turn on and turn off volte}
All Miui 8 Features
Wi-Fi & Hotspot Working
Bluetooth
All sensors working
Gesture-Anywhere feature
Animation Control
small DPI
feature to disable buttons
Themes Working
All System app extra-customization
Added feature to import third party themes
Notification customization
Home-screen customisation
Mi Account{Working}
App Lock
Dual Apps
Weather Mate(M8) intead of normal weather app
Volume Boost
Rounded-Corners
Dolby Atmos Pre-installed
Pre-Rooted
Mix Explorer
Jeejen Home
Chinese Bloatwares Removed
One-Handed Mode
And many many many many many more
*But I faced some bugs like this which i was not able to solve.:--------->
Camera
I was not able to completely port camera.
When I start phone everytime(power ON), and open camera it work for a slight second(upto 4-5 seconds)but then after it says ''can't connect to camera''. And after it whenever i launch camera app it says the same.
Except Camera this ROM is smooth and very much stable than the stock one.
I'm using this for quiet a month and had felt no issues
It had better battery backup,batter RAM Management
If any dev is seeing this please help me solving th camera problem described above
And here is the link for the miui pro ROM :------->
https://drive.google.com/file/d/1mo7cfWtFoAymOrrHShRSCBZP-0f9XGVv/view?usp=drivesdk
Note That Gapps are already included.
Procedure for Installing ROM:-------->
1) Download the ROM
2) Boot to twrp and wipe data,system,cache
3)Install the ROM so simple.
4)Enjoy!
SOURCE :
As The oem has not release the kernel source which is againt gpl that android follows.
So I have ported ROM on top of prebuilt stock kernel.
Kernel
Have Fun!!!
And
Once
Again
THANKS!
I will like to give this a try..
Here is the link:----->
https://drive.google.com/file/d/1mo7cfWtFoAymOrrHShRSCBZP-0f9XGVv/view?usp=drivesdk
Feel free to feature on YouTube.
Thanks!
please solve the camera issue
please solve the camera issue
Thanks for this Rom
I have been searching for MIUIPRO 64 bit Rom to port since long time, thanks bro for providing this rom. I can try helping you for Camera fix.
Thread closed due to GPL non-compliance. PM me when you're ready to add the link for kernel source.
Thread re-opened.
Well cool.
this link dont work
Hi there,
If you haven't heard it already, we have official support now and Q is coming too.
links:
https://wiki.lineageos.org/devices/s3ve3gjv
https://wiki.lineageos.org/devices/s3ve3gxx
credits:
francescodario
me
LineageOS
Klte dev team (you guys rock)
Sources: www.github.com/LineageOS/android_device_samsung_s3ve3gxx
Deleted
Tested, works really well! Good job! Even the battery usage is great. It's smoother compared to 7.1.
As it's pointed out, Gapps breaks RIL. Everything else works except radio and offline charging. Installed Aurora Store and I'm pretty happy with it.
Things I tested:
☑ RIL
☑ Camera Front/Back
☑ Video Recording
☑ Bluetooth
☑ WiFi
☑ Sound
☑ GPS
☑ Calls
☒ Offline Charging, it loops.
☒ Radio, phone freezes.
@notfood
I can confirm your tests, but can you please test Videorecording with 1080p. For me the Video Quality (only with 1080p!) is low, becouse there are randomly White lines from the left to the right in the Video. (Like in all builds after 08/2018)
Humaxxx said:
@notfood
I can confirm your tests, but can you please test Videorecording with 1080p. For me the Video Quality (only with 1080p!) is low, becouse there are randomly White lines from the left to the right in the Video. (Like in all builds after 08/2018)
Click to expand...
Click to collapse
I see the white lines, they're sporadic but they're there only with 1080p.
HI
My findings so far: All things mentioned above are working for me as well, but with some exceptions:
GPS finds plenty of satelites, but doesn't snap in ( no position..).
Battery- charging freezes once, I had to reboot to go on.
In Whatsapp recorded video-sequences aren't playable ( frozen screen or artefacts..)
I couldn't find any menue to choose the touchscreen - triangles for moving the cursor in a text document.
I'm looking forward the next Version....:fingers-crossed:
Just tested this rom on my GT-I9301I for an hour or so and i have to say that auto-rotation doesn't work sometimes, also i don't know what exactly RIL is but i installed the gapps aroma (customized) and didn't realize any issue related to gapps until now, and also i got a new phone recently so the old phone doesn't have a sim card anymore, and i don't plan to put one on my GT-I9301I, so my old phone is somewhat like a test device now, i have tried some custom roms before but i didn't like them too much, this one doesn't look bad, except i wish you could do something about offline charging.
Error: this package is for device
Thank you for your contribution! I tried to flash it to my GT-I9301I with the help of TWRP 2.8.5.0 (I know its old, is there a better approach?). Before flashing i wiped everything, now when I try to install it from the sdcard it fails with the Error "E3004: This package is for device: s3ve3g, s3ve3gds, s3veg3gjv; this device is ." What am I doing wrong? Why is the installer not recognizing my device?
Koksnuss said:
Thank you for your contribution! I tried to flash it to my GT-I9301I with the help of TWRP 2.8.5.0 (I know its old, is there a better approach?). Before flashing i wiped everything, now when I try to install it from the sdcard it fails with the Error "E3004: This package is for device: s3ve3g, s3ve3gds, s3veg3gjv; this device is ." What am I doing wrong? Why is the installer not recognizing my device?
Click to expand...
Click to collapse
You have to use a newer Version of TWRP:
https://dl.twrp.me/s3ve3g/
I know this is only for the single sim variant, but would this work on a duos without ril at least? I don't really need ril that much right now.
JaadiBooti said:
I know this is only for the single sim variant, but would this work on a duos without ril at least? I don't really need ril that much right now.
Click to expand...
Click to collapse
Deleted
another useless ROM, we arrived at 10, or 15?
mariocaraf said:
another useless ROM, we arrived at 10, or 15?
Click to expand...
Click to collapse
Deleted
He didn't work he remained stuck
Please Help
Waiting for an edititon for Sony sensor! On Sony sensor not works camera and flashlight, but rom is usable as daily driver.
Auto-rotate is working in YT Vanced and other apps only sometimes.
This is very cool ROM, better than Nougat!
ayochan said:
He didn't work he remained stuck
Please Help
Click to expand...
Click to collapse
If it gets stuck, you are probably running an outdated firmware. Get the latest from Sammobile or check the Telegram group. You will need Odin or Heimdall to install it. Be careful which firmware you are burning, it can brick your device if it's the wrong one.
For more than an hour it is stuck in the installation screen
Humaxxx said:
You have to use a newer Version of TWRP
Click to expand...
Click to collapse
thanks, that worked perfect! I also like that encryption works
Just bought my a new Evo 860 ssd so I have enough storage for building multiple devices . So yes more build coming this week for Sony and dual SIM.
My 300gb ssd before didn't quite had enough.
Hi Thargorsson,
First of all. Excellent work on the new ROM!
I have just got a hold of 5x S3 NEO and wished they had a newer version than 4.4.2.
After some searches on Google I found this forum. I'm going to wait until you have an updated version of this ROM.
Please keep us all posted on any progress
Cheers,
Steve
Hi every1 ... Is there any custom with working NFC available ?
zOOk1981 said:
Hi every1 ... Is there any custom with working NFC available ?
Click to expand...
Click to collapse
No
zOOk1981 said:
Hi every1 ... Is there any custom with working NFC available ?
Click to expand...
Click to collapse
Phh aosp might work out of the box. Otherwise I've used LOS 17.1 (from this forum) and it can be made to work with nfc on global vendor, but that's not supported by the dev.
The reason most roms here don't have NFC is that most of the devs are from india, so they use the indian vendor; but the indian hardware doesn't have nfc (so the nfc stack is most likely missing from their supported vendor image).
I think to stop confusion these current custom ROMs should be marked as Begoniain only...
Once a ROM is out that has all the features of Begonia like NFC etc then it can be marked that...
Photopuppet said:
I think to stop confusion these current custom ROMs should be marked as Begoniain only...
Once a ROM is out that has all the features of Begonia like NFC etc then it can be marked that...
Click to expand...
Click to collapse
I'm not so sure about that. The ROMs themselves have the features (except for some broken configs here and there). Just the devs won't "support" global. If I had experience doing any android-related dev work and the time&patience to deal with some of the demanding users around here, I'd have "supported" global rom for LOS 17.1. Maybe some money incentive on some of the experienced devs here would help? I mean, people usually pay for support on open-source projects.
Otherwise, I've put in nearly a hundred hours of "research" into this phone and you can read my posts on the LOS thread on how to get the other things working. It's more like things need a simple patch here and there (but some, like hotspot, do need a rebuild, I think); there's no need a completely new ROM.
Yes. Some GSI support nfc. For example I have working nfc on havoc 2.9 GSI official.
Latest rom : lineage-19.1-20220928-UNOFFICIAL-clover.zip, see this link :
Changelog :
- Sept Security Patch
- Update cam HAL to LA.UM.10.2.1.r1-03300-sdm660.0.
- Switch to 4.19 Nyx kernel
Installation instructions :
- Perform a backup of your current ROM (optional)
- Use latest 4.19 twrp created by pix106: https://androidfilehost.com/?fid=15664248565197205779)
- Reboot into recovery/twrp, format data, then reboot into recovery/twrp again.
- Flash ROM.
- Flash GApps is optional.
What's not working:
Let me know.
Known issues :
- Disabled Encryption
Please post the bug along with log (use syslog).
Source :
Kernel : clover
Device tree : sdm660
Update : latest version lineage-19.0-20211105-UNOFFICIAL-clover-new.zip pass safetynet.
Tried already in a mi pad 4 (8") and everything working so far.
Great work!
Does it support Monet theming?
Everything works OK, except I cannot change battery indicator (to circle, it just stays battery-shaped) and also can't show battery's %
Just nothing happens when i try to change these
redcord said:
Everything works OK, except I cannot change battery indicator (to circle, it just stays battery-shaped) and also can't show battery's %
Just nothing happens when i try to change these
Click to expand...
Click to collapse
Yes...some features are still not working as it depends on lineage source.
Installed Ok and runs - but with a few issues. Playstore not certified. Android system intelligence crashes regularly. It insisted on formatting my SD card so I let it but now I will have to put back all my music and books. Never mind. I will keep using it and updating for now.
Plus: I just tried my Bluetooth earbuds. They paired fine and are working with aptX
Plus: USB PD charger gives Charging rapidly
Everything works OK, except stop working Android System intelligence
Mi pad 4 (8") Wifi
GregEden said:
Installed Ok and runs - but with a few issues. Playstore not certified. Android system intelligence crashes regularly. It insisted on formatting my SD card so I let it but now I will have to put back all my music and books. Never mind. I will keep using it and updating for now.
Plus: I just tried my Bluetooth earbuds. They paired fine and are working with aptX
Plus: USB PD charger gives Charging rapidly
Click to expand...
Click to collapse
Playstore is certfied using patched boot.img by magisk and magisk hide. I didn't test using android system inteligence...will check later.
It's beautiful and quite stable, but with some minor issues.
1. Android System Intelligence keeps stop working. There's already a workaround by installing "ExtraPixel" module from this channel https://t.me/randomfilezz, but I suggest to make a fix inside the ROM.
2. Yep, Monet theming engine, ported by @kdrag0n , is open-sourced, so maybe consider adding it and makes it a better ROM. https://www.xda-developers.com/android-12-material-you-theming-system-recreated/
3. Always on display feature missing. Maybe you forgot to add it.
And the clock position and size on lock screen without notification is not accurate, compared to other devices.
Ralph Chen said:
And the clock position and size on lock screen without notification is not accurate, compared to other devices.
Click to expand...
Click to collapse
Did you compared to other device that running with lineageos 19.0?
Ralph Chen said:
It's beautiful and quite stable, but with some minor issues.
1. Android System Intelligence keeps stop working. There's already a workaround by installing "ExtraPixel" module from this channel https://t.me/randomfilezz, but I suggest to make a fix inside the ROM.
2. Yep, Monet theming engine, ported by @kdrag0n , is open-sourced, so maybe consider adding it and makes it a better ROM. https://www.xda-developers.com/android-12-material-you-theming-system-recreated/
3. Always on display feature missing. Maybe you forgot to add it.
Click to expand...
Click to collapse
Those features will be on this device once it is available in lineage source.
sabar_op said:
Did you compared to other device that running with lineageos 19.0?
Click to expand...
Click to collapse
I compared with other ROMs such as pixel experience.
Maybe it has to be in the center of the screen.
Ralph Chen said:
I compared with other ROMs such as pixel experience.
Maybe it has to be in the center of the screen.
Click to expand...
Click to collapse
Not sure about that, perhaps it is new style of lineageos 19..or lineage source not implemented yet to center the clock in the lockscreen...
My microphones are not working, via wired or bluetooth connections.
And the internal mic is dead too.
GregEden said:
My microphones are not working, via wired or bluetooth connections.
And the internal mic is dead too.
Click to expand...
Click to collapse
Are you sure? I am test it using mictest...and it works properly.
sabar_op said:
Are you sure? I am test it using mictest...and it works properly.
Click to expand...
Click to collapse
OK it works now. I did a reboot, and that did not help. I went into the recorder settings and toggled autodetect off then back on. And now it is working. I will test again tomorrow with my Duolingo lesson.
Dear all, may I ask for help please? I just manager to load 19.0 by following the above steps. However when it comes to the initial set up page, where it says checking for updates, it goes blank. How do I resolve this?
Btayyyy said:
Dear all, may I ask for help please? I just manager to load 19.0 by following the above steps. However when it comes to the initial set up page, where it says checking for updates, it goes blank. How do I resolve this?
Click to expand...
Click to collapse
I had that issue but I do not remember how I resolved it. I think I just kept swiping up until I could select next and it move on.