Related
its long procedure but worked for me I've used this one on AEX latest pie version and Bootleggers latest pie version plus nameless latest kernel on both rom Don't know about other Treble Roms I hope it will work with others too If anyone trys other tell me by posting this thread.....
I'am not developer for this mod so all development credit goes to www.opendesktop.org
But for workaround all credit goes to me
BEWARE YOU CAN'T UNINSTALL IT YOU HAVE TO DIRTY FLASH YOUR CURRENT ROM AGAIN TO UNINSTALL IT
- First delete both audio_effects.conf file from both directories (/vendor/etc/) and (/system/etc/)
- Set SELinux to Premissive use (https://forum.xda-developers.com/apps/magisk/selinux-mode-inverter-t3775271)
- Flash ClearSound Mod (https://za.gl/gsSDdb)
- Flash Viper4Arise (It will take upto 15 minutes don't be panic till that time)
https://www.opendesktop.org/dl?file...s.zip&file_size=128218850/&project_id=1274328
Note : use aroma installer then in installer screen, select materialize version and yes to (lib workarounds)
- Reboot
- Open DD4Arise App click on power icon to enable sound effects
- Open Viper4Arise App and install driver and Reboot
------------------------------------------------------------------------------------------------------------------
If it Doesn't work like what happen in my case DD4Arise force closes and Viper4Arise driver install loop again and again so I've found an workaround :
- Open (/vendor/etc/audio_effects.conf) and find (libv4a_fx_ics.so)
- Change path to (/system/lib/soundfx/libv4a_fx_ics.so)
- Open Viper4Arise and install driver and Reboot
------------------------------------------------------------------------------------------------------------------
If still issue remains then final thing :
- Open Magisk and Go to Download section and search for Dolby Digital Plus latest module and reboot
- Open Magisk and Go to Download section and search for Viper4Android latest module and reboot
Note : this one Viper4Android version have aroma installer so use volume buttons and input according to screen instruction, same as above select materialize version by pressing volume up and yes to (lib workarounds) using volume up but there is an extra option for OnePlus which you have to decline by pressing volume down
- Open Dolby app click on power icon to enable sound effects
- Open Viper4Android App it won't ask you to install driver just check driver status and enable master switch then status will change to Processing
Feel Free to Thanks me If It will work on your z2 plus
I did not get any aroma installer while installing the mod.
This mod doesn't improve sound and old and bugs default sound files, pie has already improved audio. All u need is to instal ZAP mod less than 1mb and get an good earphones ?
ChetanLokhande said:
I did not get any aroma installer while installing the mod.
Click to expand...
Click to collapse
when you flash this :
https://www.opendesktop.org/dl?file...s.zip&file_size=128218850/&project_id=1274328
It will ask you to use aroma or traditional one and both of them have the same instruction as i've mentioned above difference, only UI is different you have to press volume up or down button to choose option in traditional installer.
Doesn't install anything !!
BeyondRom V5.8
Based on Android 9.0 - G975FXXU3ASK1
Devices Supported: G973F(D), G975F(D)
ROM Features
<*>Aroma choices: full/dirty wipe, debloating, Bixby key remapping, Emoji</*>
<*>Supports G973F(D) and G975F(D)</*>
<*>Base SM-G975F G975FXXU3ASK1 odex/deodex November 2019 patch level</*>
<*>CSC features (camera sound menu, call recording, LTE only mod, camera during call, etc)</*>
<*>Knox removed, 1170 fonts by Winb33, AppLock</*>
<*>Included the security bypass from Ian’s multidisabler</*>
<*>build.prop tweaks: multiuser, Bluetooth Aptx driver, call ring delay, SHealth fix, WiFi and BT passwords remember</*>
<*>Dual SIM + SD Card, allow ss in secure apps, disable sig verification, SecureFolder</*>
<*>Reboot directly into rooted system from power menu, disable high volume warning</*>
<*>Possibility to choose in aroma to remove the boot warning</*>
Added/fixed in v5.8
<*>Latest ASK1 sw level</*>
Credits
- John Wu for Magisk
- Ianmcd for his multidisabler
- Ianmcd & Geiti for the TWRP
- Winb33 for the fonts app
- SuperR for his kitchen
- fOmey for his smali patcher
- Khongloi for Secure Folder fix
- Corsicanu for his help and advises
- Sannoc for his help and support
- All people from Telegram group for testing (especially Nathan, Carlos, Raphael, Troy, Jay, Hayden, Alan)
Download Link
Google Drive
Digi Link
Flashable patched TWRP S10 (G973F)
Flashable patched TWRP S10+ (G975F)
Installation procedure for upgrade from BeyondROM v5.4 / v5.5
- Take a full TWRP backup
- Dirty flash or clean flash is ok
Installation procedure for upgrade from BeyondROM less than v5.4
If you are on stock ROM, follow the attached guide
This ROM version needs ASIG BL and ASIG TWRP/recovery or it won't boot !!!
1. Boot in TWRP and take a full backup before flashing BeyondRom 5.8 ROM zip
2. Copy the ROM zip to your phone (Ext SD preferably)
3. Download Ian’s Multidisabler v1.6 or higher and copy it to your phone
4. Download Ian’s TWRP 3.3.1-10(11), copy it to your phone and patch it with Magisk Manager or use the patched TWRP from gdrive folder
5. Download the stock FW for your device (S10 or S10+) – Frija is a good tool to use
6. Extract the AP from stock FW, copy it to a temp folder on your internal SD
7. Patch in Magisk Manager the AP
8. Copy the patched AP to your PC and replace the recovery.img inside the AP with the patched TWRP from point 4. Rename the patched TWRP to recovery.img before replacing it into the patched AP
9. Open Odin 3.13.1 or 3.13.3 and fill all slots with: patched AP, BL, CP and HOME_CSC. Uncheck the automatic restart and start flashing.
10. Once flashing completed, long press VOL DOWN + POWER until screen becomes black. IMEDIATELY the screen gets black, press VOL UP + BIXBY + POWER BUTTON to enter to TWRP recovery.
11. Once in TWRP, flash the Multidisabler v1.6 and right after flash BeyondROM v5.8. No need to reboot in between.
12. After flashing the ROM zip, save the aroma log, go back to TWRP root menu and select Reboot --> Recovery
13. Wait for the boot up (5-7 minutes) and setup your ROM to your liking
Enjoy the release of BeyondROM !
Advises
1. Clean install if you have issues with dirty flash; don't start flashing BR5 without a twrp backup of your existing rom
2. If you have flashing issues: check rom zip MD5 hash
3. If you consider that the modded services are the culprit for your SnapChat ban, use stock services.jar provided in the download folder
4. If you like my work, consider buying me a coffee (PayPal link)
Helpful links
Telegram chat
Happy flashing good people!
Reserved!
bugs?
excellent work, now many users will be able to try. your hard work.:good:
Sent from my SM-G973F using XDA Labs
No bugs.
Congrats on making a xda thread fianlly.
This is by far the best rom for s10. Clean. Smooth. No Chinese kang base like other roms on xda.
merci bcp
no fonts found in settings
mcn1970 said:
no fonts found in settings
Click to expand...
Click to collapse
If you need more fonts you can install Wings Fonts.
So far so good, no issues on an Australian delivered g975f, looking forward to some modded kernels and multiboot
delete
AltarOfMyEgo said:
If you need more fonts you can install Wings Fonts.
Click to expand...
Click to collapse
i know that, but probably no fonts at all is a bug
mcn1970 said:
i know that, but probably no fonts at all is a bug
Click to expand...
Click to collapse
Please explain what do you mean no fonts. No fonts at all? What does your UI looks like? And your keyboard? With no fonts?
AltarOfMyEgo said:
Please explain what do you mean no fonts. No fonts at all? What does your UI looks like? And your keyboard? With no fonts?
Click to expand...
Click to collapse
in settings in Font style there is nothing to choose
Please, alternative mirror for download?
Thx
mcn1970 said:
in settings in Font style there is nothing to choose
Click to expand...
Click to collapse
You need to wait like 30 seconds and the fonts will appear.
Hey man, does Google Pay and other Banking apps work with this ROM or does Knox stay Tripped and security blocks banking apps etc? Hated that when I used to root my Samsung.
You need to follow some specific guides to make google pay to work. Check on telegram chat threads.
starbucks2010 said:
You need to follow some specific guides to make google pay to work. Check on telegram chat threads.
Click to expand...
Click to collapse
Sorted boot loop. Can't find the chat thread related to google pay on Telegram
i dont have LTE, only 4G with the East European CSC
what CSC should I chose when flashing?
Hey starbucks2010,
Absolutely loving the Rom. Smooth, no bugs and great battery life so far.
Is there a possibility you could mod the camera to 100% JPEG quality? Like done on Diamond Rom?
This would make the rom perfect for me
Salam and hello everyone, ive edited mixer_paths_mtp from oreo 8.1 and made a magisk module for Dual Speaker SoundMod (vince) [AOSP PIE ONLY] .
read carefully, [AOSP PIE ONLY!!!]
check #2 post for latest AOSP Pie , AOSP Q and Miui11 Pie Vince updates
first flash magisk module.
(if dual speaker not working for you after reboot, proceed manual steps below)
then
paste manually the edited mixer_paths_mtp.xml into root/system/vendor/etc - using root explorer/mixplorer or other file manager
(copy the original mixer_paths_mtp.xml from root/system/vendor/etc to sd card or anywhere you like, rename the edited mixer_paths_mtpMODI.xml to mixer_paths_mtp.xml
then copy and paste it into root/system/vendor/etc. change permissions to 644 (rw- r-- r--), after that reboot your phone.)
try listen to the dual speaker.........
*its working for me, tried on latest PE and Havoc 2.7
*forgot to mention, i also flashed audio modification library too. (download from magisk) if dualspeaker already working for u guys just ignore.
Please try and give me feedback.
also careful on the volumes for u guys that
already got audio enhancer such as viper/dolby etc. installed.
your phone, your risk
Thank u very much...
Magisk
https://drive.google.com/file/d/1-1C4w0OV8Eyzl1jq1Xj1FH-DgBzKQQfE/view?usp=drivesdkanual
Manual
https://drive.google.com/open?id=1-6fhdJ_V3nNxaiC_MTJrhmspZJaWWfQd
Tutorial Video ( i forgot to"copy the original mixer_paths_mtp.xml from root/system/vendor/etc to sd card or anywhere" in the video)
https://drive.google.com/file/d/1J1fb_Z9mBXu6p7-USO464fHLDWg6z3K0/view
VIPER4Android FX v 2.7.1.0
i can share mine. ive added with my 4 viper profiles in it, so u can just choose which profile for speaker,headset,usb or bluetooth that suits u after installed.
-download the link below
https://drive.google.com/file/d/1-bH1CILCTxt0o0Gxi-mm7GhfIoWIPPbS/view?usp=drivesdk
-extract it in internal storage
-go to magisk, search viper4android fx version 2.7.1.0 and flash that or download here
https://drive.google.com/file/d/1-ewer6lRMSOMPzq1issS520rJEr3QCsZ/view?usp=drivesdk
or zackptg5 website https://zackptg5.com/android.php
-after that find viper4android.apk in apps drawer. install it, grant root access,install driver and it will autoreboot.
-after rebooting your device, open viper4android.apk again and click speaker. choose any of 4 profiles there. i recommend the kustom or kustom dolby system bcoz the original dolby system too loud (for me). so i edited and create the kustom profile.
-load the profile. done.
(u can play song while u load the profile too, to check and choose which profile suits u. same goes for headset,usb and bluetooth.
if u want to add more profile, paste it in the
internal > viper4android > profile. )
Credits :
Allah The Almighty
source code @Dante63
oreo mod @rashidmalyk
Latest
October 30 2019
-sharing my last dualspeaker work for vince, moving to a new phone.
-Miui11 Pie Vince only DualSpeaker Mod
Magisk
https://drive.google.com/file/d/1-9w5X_Z6TybdB8jeMeQHE0ZMvg45BIBo/view?usp=drivesdk
Manual
https://drive.google.com/file/d/1-DMiJNzTrjJhUwqbqUx9BAf803TGsKma/view?usp=drivesdk
October 2nd 2019
For Q, u can use the September 3rd 2019 Pie mixer file below for dual speaker mods.. better use manual method for now, and i didnt test any audio enhancer yet. but can confirm that dual speaker is working...
thanks
September 26th 2019
* just a little guide to make sure your dual speaker working...
-the original mixer file size for aosp pie is 62.48kb, the file ive edited is 63.71kb, so if u see your mixer_paths_mtp.xml in root/system/vendor/etc is 62.48kb apply manual method again and reboot. u need to have the 63.71kb mixer_paths_mtp.xml file in root/system/vendor/etc to make your dual speaker working. hope this will solve your "not working dual speaker issue".
September 3rd 2019
Enhanced Version DualSpeaker Stereo Mod For Vince (AOSP Pie) Extra Careful On Volumes, Especially For Audio Enhancer User
*created from latest aosp pie rom mixer file(august security patch rom)
*for this file 1 ive put nearly max setting on all speaker output and edited a few lines for headphone in the mixer file.
*the purpose? to enhanced bass sound, better stereo mod from both earpiece and main speakers.
Magisk
https://drive.google.com/file/d/1-S6CJEhjyNVQzT1KJlYYEW4Z-IlQLmjE/view?usp=drivesdk
Manual
https://drive.google.com/file/d/1-YYO30j491GXNtiZ1K22TOOWRiqEQhh9/view?usp=drivesdk
#tried on vince Android Q gsi, working
*as usual need to use both method, i will not create anymore magisk module or fix current magisk module. if anyone willing to help to make working magisk module, please do so and share here.. thank you very much
not working with magisk, tried the manual method.
working :victory:
thanks @ninken84 :good:
got pms and replies..it seems that magisk module not working for some pie custom roms, i dont know how that happened bcoz i use the same file that ive edited. so, if anybody had the same issue then i suggest just use both magisk and the manual method bcoz it will be fine. thanks
Can you make a video for me? And Salam you
SonyThEgAMaer said:
Can you make a video for me? And Salam you
Click to expand...
Click to collapse
pmed.. thanks
Can confirm it works on PE with DA Kernel and Audio Modification Library and Viper4Android. Really really nice mod. It really improves audio and the speaker is so loud which surprised me.
Moon_420 said:
Can confirm it works on PE with DA Kernel and Audio Modification Library and Viper4Android. Really really nice mod. It really improves audio and the speaker is so loud which surprised me.
Click to expand...
Click to collapse
nice..good to hear bro :good:
thanks for the feedback
Moon_420 said:
Can confirm it works on PE with DA Kernel and Audio Modification Library and Viper4Android. Really really nice mod. It really improves audio and the speaker is so loud which surprised me.
Click to expand...
Click to collapse
What is DA Kernel? You have ViPER4Android FX Legacy or XHifi?
XxXxXx121212 said:
What is DA Kernel? You have ViPER4Android FX Legacy or XHifi?
Click to expand...
Click to collapse
-DA kernel is Dark Age kernel
-i think hes using the same as mine Viper4Android FX
i can share mine. ive added with my 4 viper profiles in it, so u can just choose which profile for speaker,headset,usb or bluetooth that suits u after installed.
-download the link below
-extract it in internal storage
-go to magisk, search viper4android fx version 2.7.1.0 and flash that.
-after that find viper4android .apk in apps drawer. install it, grant root access,install driver and it will autoreboot.
-after rebooting your device, open viper4android . apk again and click speaker. choose any of 4 profiles there. i recommend the kustom or kustom dolby system bcoz the original dolby system too loud for me. so i edited and create the kustom profile.
load the profile. done.
(u can play song while u load the profile too, to check and choose which profile suits u. same goes for headset,usb and bluetooth.
if u want to add more profile, paste it in the
internal > viper4android > profile. )
Viper4Android
https://drive.google.com/file/d/1-bH1CILCTxt0o0Gxi-mm7GhfIoWIPPbS/view?usp=drivesdk
ninken84 said:
-DA kernel is Dark Age kernel
-i think hes using the same as mine Viper4Android FX
i can share mine. ive added with my 4 viper profiles in it, so u can just choose which profile for speaker,headset,usb or bluetooth that suits u after installed.
-download the link below
-extract it in internal storage
-go to magisk, search viper4android fx version 2.7.1.0 and flash that.
-after that find viper4android .apk in apps drawer. install it, grant root access,install driver and it will autoreboot.
-after rebooting your device, open viper4android . apk again and click speaker. choose any of 4 profiles there. i recommend the kustom or kustom dolby system bcoz the original dolby system too loud. so i edited and create the kustom profile.
load the profile. done.
(u can play song while u load the profile too, to check and choose which profile suits u. same goes for headset,usb and bluetooth.
if u want to add more profile, paste it in the
internal > viper4android > profile. )
Viper4Android
https://drive.google.com/file/d/1-bH1CILCTxt0o0Gxi-mm7GhfIoWIPPbS/view?usp=drivesdk
Click to expand...
Click to collapse
Thanks
Tested the magisk module and its working (Syberia rom, DA kernel and ViPER)
but which line can i edit in the mixer to increase ear speaker volume?
counter100 said:
Tested the magisk module and its working (Syberia rom, DA kernel and ViPER)
but which line can i edit in the mixer to increase ear speaker volume?
Click to expand...
Click to collapse
nice bro :good:
ear for earspeaker/earpiece,
but there r a few other lines also need to be edited there too for earspeaker.
i put 90 for ear speaker.max is 95 so becareful bro. cant guarantee
i suggest u watch dante63's tutorial first
https://youtu.be/Su9Af-jrJWQ
not working with ainur sauron or narsil? even after installing aml?
obliviousryuk said:
not working with ainur sauron or narsil? even after installing aml?
Click to expand...
Click to collapse
sorry bro, i dont know bout this. never tried ainur sauron or narsil before.
can u give me the download link,i want to try it too
ok, just tried ainur sauron.
flashed ainur sauron MK III (27.05)
checked root/system/vendor/lib/soundfx and root/system/vendor/lib64/soundfx
the files installed there.
to make it working need a manager, so i download and flashed Ainur JamesDSP v2.2 .
rebooted, open music, open JAMESDSP Manager. tweak it... and yes, its working.
*ive checked that dual speaker already working before i flash the JAMESDSP manager
*flashed without viperfx/dolby
download the manager at magisk Ainur JamesDSP v2.2 or here https://zackptg5.com/android.php
try and give feedback.. thank you
Good
Is it works for pixel caf rom
srinu1997 said:
Is it works for pixel caf rom
Click to expand...
Click to collapse
try it bro. and yes, its for aosp pie android 9 .
Its not working in havoc 2.8 there one deference in file name you say mixer_path_mtp.XML in hovec 2.8 have mixer_path.XML I try to rename like havoc but not sound?
Project Pixel P1.0
What is Project Pixel?
Project Pixel is a small team of developers that work on porting most, if not all of the Google Pixel features to stock firmwares.
We mostly specialize in Stock Samsung Firmwares, although we may do work on ports of OneUi once in a while. Our objective is to deliver the best performance by using stock firmware whilst also improving upon it by debloating and tweaking whilst also giving you all the features of a Pixel device.
Pixel Pie 1.0 Feature List:1. AdAway
2. Deep Debloat and DeKnoxed (Apps, permissions, framework, unnecessary features-stripped and removed)
3. Dolby Atmos with Correct Tuning and Gain (Main Speaker has most power and Earpiece just adds detail and treble)
4. Eleven Music (Lineage OS 15.1)
5. Files GO (File Manager)
6. GCam (Note: GCam might not work on all devices, because of hardware compatibility) Version is 6.0
7. Google Calculator
8. Google Calendar
9. Google Chrome
10. Google Clock
11. Google Contacts
12. Google Keep (With Handwriting Libs)
13. Google Lens (Works within Google Photos and Recents in Pixel Launcher)
14. Google Messages
15. GPay (Working Payment Method along with NFC functionality)
16. Google Phone
17. Google Pie Emojis (Not Samsung Ones)
18. Google Play Games
19. Google Tasks
20. GBoard
21. Mtweaks (Has Hardware Control - Similar to Kernel Adiutor but more tailored to Exynos)
22. Pixel Fonts
23. Pixel 3 Boot Animation
24. Pixel 3 Live Wallpapers with Normal Wallpapers
25. Pixel Google Photos (Free Original Quality Storage)
26. Pixel Module V1 - Pixel Animations, framework and configs.
27. Pixel Launcher with new recent menu
28. Pixel Sounds
29. Samsung Digital Wellbeing
30. Samsung App Lock
31. Samsung Gallery (Stripped Down and lightened to improve performance)
32. Samsung's Stock Camera with HDR parameter changes, debloated and additional video modes (4k30 at HDR- Not Fully Tested)
33. SystemUI Tuner (Provides battery stats along with other useful customiztions - Check QS icons and add it to QS Panel to view)
34. VoLTE Supported
35. YouTube Vanced (Ad-free Youtube)
CHANGELOG 1.0:
initial release
Bugs:
None
Notes:
1. To view Battery Stats and Storage, pull down the Quick Settings Panel and on the top right click the three bubbles button and then Button Order. Then move the new Battery and Storage icon to the Quick Settings.
2. Make sure you set Google Phone as your default phone app. Go-to Settings/Apps. Click the three dots in the top right corner. Then click default apps. Then Calling App and select Phone.
3. After first boot, reboot your device once to ensure dalvik optimization.
INSTALL INSTRUCTIONS:
- As the ROM zip doesn't contain any kernel, is mandatory to have the linked TWRP installed. (Please flash the correct ones)
- For people coming from other ROM than stock, please do a clean flash
- Copy the ROM zip to your phone
- Boot in TWRP and flash the ROM zip
- After flashing the ROM zip, goto Reboot --> Recovery
- Wait for the boot up (5-7 minutes) and setup your ROM to your liking.
- Don't try to update magisk or you'll get a bootloop. If you just tried and got bootloop, reflash the twrp patched with stable 19.3 magisk (link above)
Download Link and Sources:
Feel free to join us telegram via the group: https://t.me/joinchat/G-BflEMjGlgp1NeWxDA2bA
Correct TWRP: https://drive.google.com/drive/folders/1aj2CN-Hy4S_RQOqiwoG6KWvQJJV3ND70
Download Link 1.0 :https://drive.google.com/open?id=11WOWJj5bmsBxnUKHNHk3f93gB7DqL_ZI
(MEGA MIRROR: https://mega.nz/#!WLpVwAyZ!5RAp9nXXJYUpxU5SnKnthVyEPZw70ur9g6U6eNN1lcA)
Magisk:https://github.com/topjohnwu/Magisk/releases
Kernel Source:http://source.samsung.com/
Credits:
Google for Android and Framework
Samsung For Their Kernel
Screenshots: https://imgur.com/a/s4W2RF2
Any difference in this rom and one im using from other moderator?
pankajgavri said:
Any difference in this rom and one im using from other moderator?
Click to expand...
Click to collapse
This one supports TWRP flashing atleast, so yes it is a good idea to dirty flash to this ROM just because it is a new one and will be the one supported from now on
how to get snapchat working?!?!
Eyy, well done Zer0!
S10 plus supported ?
S10e will be supported?
Everything worked fine but after the reboot I hang in the loading screen also a second reboot with root right does not help ... any ideas?
Waleedaligomaa said:
S10 plus supported ?
Click to expand...
Click to collapse
Check my s10+ thread
demolatorul said:
S10e will be supported?
Click to expand...
Click to collapse
yes if you can test then we can get s10e build out very fast
Sent from my SM-G935F using Tapatalk
works with latest firmware update? G973FXXU3ASG8
because i have bootloop (Google-Boot-Animation)
My Steps:
- Updated firmware to G973FXXU3ASG8
- Installed latest Magisk Manager
- patched AP
- installed (magiskpatched) AP via Odin
- installed TWRP App
- downloaded twrp-3.3.1-3-beyond1lte.img via TWRP
- patched twrp-3.3.1-3-beyond1lte.img via Magisk
- flashed (magiskpatched)TWRP via TWRP
All good ....
then...
- boot into TWRP - wiped System, Data, Dalvik Cache and Cache
- flashed ZIP
- flashed Magiskv19.3
- reboot wait 30 min.
- reboot again
- wait over 45 min.
What did i wrong? :crying::crying::crying::crying:
camera wrong
Gcam and Samsungcam don't work，screen black then phone reboot
Bxactions app not detecting bixby button,
In previous pixel rom i changed this setting
Its located in system/usr/keylayout/generic.kl
When you open generic.kl , scroll down to the code no. 703 and change it from VOICE_ASSIST to WINK
It was working
Yesterday i dirty flash your rom and changed this setting but bxaction app is still not detecting bixby button
Please help
TIA
blackxxx15 said:
works with latest firmware update? G973FXXU3ASG8
because i have bootloop (Google-Boot-Animation)
My Steps:
- Updated firmware to G973FXXU3ASG8
- Installed latest Magisk Manager
- patched AP
- installed (magiskpatched) AP via Odin
- installed TWRP App
- downloaded twrp-3.3.1-3-beyond1lte.img via TWRP
- patched twrp-3.3.1-3-beyond1lte.img via Magisk
- flashed (magiskpatched)TWRP via TWRP
All good ....
then...
- boot into TWRP - wiped System, Data, Dalvik Cache and Cache
- flashed ZIP
- flashed Magiskv19.3
- reboot wait 30 min.
- reboot again
- wait over 45 min.
What did i wrong? :crying::crying::crying::crying:
Click to expand...
Click to collapse
Use Beyond ROMs twrp. Because you updated firmware to ASG8 your using ASG8 kernel. Reading the notes tells you, that only ASF3 is supported, which is why he said to use Beyond ROMs TWRP which is based on ASF3.
Also, don't flash Magisk. It now comes as part of the recovery
ch75494012 said:
Gcam and Samsungcam don't work，screen black then phone reboot
Click to expand...
Click to collapse
I think you have the wrong twrp recovery. Use the latest "asf3 twrp" and S-/G-Cam should work again.
Zer0byZer0 said:
yes if you can test then we can get s10e build out very fast
Sent from my SM-G935F using Tapatalk
Click to expand...
Click to collapse
Yes, just bought a 10e, if you need test
Dose snnadragon s10 work ?
@Zer0byZer0
Guys what are the bugs on S10e I will try to fix them.
Hello everyone !!!
I want to install this ROM but I did not understand the installation procedure very well. For now, I'm with the original ROM with Magisk and TWRP (patched with Magisk 19.4-73). Could you explain to me in detail the procedure please?
Thank you.
Device: Samsung Galaxy S10 SM-G973F
Found this thread on XDA for the latest Viper4Android method that also works on the Poco F3 with Root and SELinux enforcing mode.
Link: https://forum.xda-developers.com/t/viper4android.4258655/
Anyone know where I can get the latest collection of Convolver Samples?
Nemix77 said:
Found this thread on XDA for the latest Viper4Android method that also works on the Poco F3 with Root and SELinux enforcing mode.
Link: https://forum.xda-developers.com/t/viper4android.4258655/
Anyone know where I can get the latest collection of Convolver Samples?
Click to expand...
Click to collapse
Most of convolvers are outdated, the best you can do is to go on the viper4android telegram channel, contact Thomas de Witt and pay 4 euro for a personal convolver for your headphone. Or you can do it yourself but it requires some solide knowledge. There are too convolvers from stormviper, a modded viper4android but the creator is a little strange and you have to ask them personally and do a "review" for the creator to get the last convolvers (testing purpose I guess). They have a telegram channel too. You can still find pack on Google but it's old. Sorry for my English !
Greenspoof said:
Most of convolvers are outdated, the best you can do is to go on the viper4android telegram channel, contact Thomas de Witt and pay 4 euro for a personal convolver for your headphone. Or you can do it yourself but it requires some solide knowledge. There are too convolvers from stormviper, a modded viper4android but the creator is a little strange and you have to ask them personally and do a "review" for the creator to get the last convolvers (testing purpose I guess). They have a telegram channel too. You can still find pack on Google but it's old. Sorry for my English !
Click to expand...
Click to collapse
Those irs files are overrated, I personally like the same settings on all of my headphones. I like moderate gain, set to inf, I love level 3 surround sound, dynamic system high end v1 at 20 percent for bass, clarity 12db or 14.8db it depends. That's my perfect settings for Bluetooth, headphones don't require so much gain. You can also search Google fiio fh5 github or IRS file and it used to find the github for those headphones I can't seem to get it anymore. There honestly nothing special they make headphones sound worse really
Techguy777 said:
Those irs files are overrated, I personally like the same settings on all of my headphones. I like moderate gain, set to inf, I love level 3 surround sound, dynamic system high end v1 at 20 percent for bass, clarity 12db or 14.8db it depends. That's my perfect settings for Bluetooth, headphones don't require so much gain. You can also search Google fiio fh5 github or IRS file and it used to find the github for those headphones I can't seem to get it anymore. There honestly nothing special they make headphones sound worse really
Click to expand...
Click to collapse
Global IRC, indeed, but the creator of viper4android can create a custom one based on your specific headphone and just for your headphone. Therefore, the quality is a another world from basic irs. The one you find free today are old and so, they make more bad than any good.
I don't believe the version I'm running from the thread in link above has Surround, Headphones and Bluetooth options.
Nemix77 said:
I don't believe the version I'm running from the thread in link above has Surround, Headphones and Bluetooth options.
Click to expand...
Click to collapse
It's switch automatically, just connect your headphone
Greenspoof said:
Global IRC, indeed, but the creator of viper4android can create a custom one based on your specific headphone and just for your headphone. Therefore, the quality is a another world from basic irs. The one you find free today are old and so, they make more bad than any good.
Click to expand...
Click to collapse
The creator of viper doesn't do anything anymore. The team Dewitt isn't the creator he's just using the open source code for the Normal driver because the viper creator won't allow him access to super quality driver from 2.3.4 my choice. No those custom IRS files are junk I have the fiio fh5 iem and the IRS files they made it makes my headphones sound wimpy. Trust me find the settings you like on viper and a good pair of headphones like my personal favorites are Master and dynamics MW08 Bluetooth.
Techguy777 said:
The creator of viper doesn't do anything anymore. The team Dewitt isn't the creator he's just using the open source code for the Normal driver because the viper creator won't allow him access to super quality driver from 2.3.4 my choice. No those custom IRS files are junk I have the fiio fh5 iem and the IRS files they made it makes my headphones sound wimpy. Trust me find the settings you like on viper and a good pair of headphones like my personal favorites are Master and dynamics MW08 Bluetooth.
Click to expand...
Click to collapse
Didn't know that. So do you use v2.3.4 or the new one ?
Greenspoof said:
Didn't know that. So do you use v2.3.4 or the new one ?
Click to expand...
Click to collapse
2.3.4 always on android 11 it takes a little extra setting up on most roms.
Techguy777 said:
2.3.4 always on android 11 it takes a little extra setting up on most roms.
Click to expand...
Click to collapse
And 2.3.4 is really better than nowadays viper? Like did you compare? Thx for your time
Techguy777 said:
2.3.4 always on android 11 it takes a little extra setting up on most roms.
Click to expand...
Click to collapse
And if so, could you tell me where did you download this version of viper? And how did you installed it ?
Techguy777 said:
2.3.4 always on android 11 it takes a little extra setting up on most roms.
Click to expand...
Click to collapse
I tried to install it but I have a I/o error, from what I read I have to change the name of a file inside vendor/etc but I can't because of permission, could you tell me how did you do that ? Thx !
I installed everything over magisk.
First Ainur Narsil and Audio modification library then reboot. After that viper then open viper and install the driver. The device will reboot. In magisk deactivate both Ainur and AML then open viper again. Driver should reinstall again. After reboot it should work. Could be that you have to enforce in settings. In a link above there is this method mentioned.
Greenspoof said:
I tried to install it but I have a I/o error, from what I read I have to change the name of a file inside vendor/etc but I can't because of permission, could you tell me how did you do that ? Thx !
Click to expand...
Click to collapse
It's going to seem like a lot of work but it's not. Your just going to download magisk files. First thing first you have root and I'm hoping your willing to switch your kernel to permissive mode? You can either do that with permissive v2 magisk module or selinux app. You need to have busybox from magisk installed.
Download 2.3.4 apk
1 switch selinux to permissive
2. Install BusyBox from magisk
Than reboot first
3. Install viper4android v4.4 on magisk manager use volume buttons to pick 2.3.4 install as a user app and if show recommended audio fix hit yes.
Reboot the device and see install the apk 2.3.4 and it should have the driver already installed.
If that doesn't work than you add James dsp magisk module new verison on magisk manager
Than flash audio modification file v4.0 after that
If you reboot again and reinstall the app and hopefully the driver will stick if it doesn't flash 4.4 zip again and reboot and install the apk.
You have to always reinstall the apk because the viper zip uninstalls it and it doesn't ever add it back likes supposed to but the driver stays installed and when you install the app shouldn't be no errors. You will need to grant storage permission for viper4android app.
It seems like a lot but it's really not and once it's installed properly it never uninstalls.
James dsp allows viper to play on phones for some reason but you can turn it off and just use viper that's what I do
https://drive.google.com/file/d/1kf02fMd-HDZp1SQkxk6wprZfbCv11eM2/view?usp=drivesdk
selinux_permissive_v2.0 (1).zip
drive.google.com
ViPER4Android FX(com.vipercn.viper4android_v2)-2.3.4.0(2340)-base.apk
drive.google.com
Trying to get all the files it's hard sometimes to find them so I'm saving you some time. 2.3.4 apk is impossible to find now I extracted the one I'm using
Techguy777 said:
It's going to seem like a lot of work but it's not. Your just going to download magisk files. First thing first you have root and I'm hoping your willing to switch your kernel to permissive mode? You can either do that with permissive v2 magisk module or selinux app. You need to have busybox from magisk installed.
Download 2.3.4 apk
1 switch selinux to permissive
2. Install BusyBox from magisk
Than reboot first
3. Install viper4android v4.4 on magisk manager use volume buttons to pick 2.3.4 install as a user app and if show recommended audio fix hit yes.
Reboot the device and see install the apk 2.3.4 and it should have the driver already installed.
If that doesn't work than you add James dsp magisk module new verison on magisk manager
Than flash audio modification file v4.0 after that
If you reboot again and reinstall the app and hopefully the driver will stick if it doesn't flash 4.4 zip again and reboot and install the apk.
You have to always reinstall the apk because the viper zip uninstalls it and it doesn't ever add it back likes supposed to but the driver stays installed and when you install the app shouldn't be no errors. You will need to grant storage permission for viper4android app.
It seems like a lot but it's really not and once it's installed properly it never uninstalls.
James dsp allows viper to play on phones for some reason but you can turn it off and just use viper that's what I do
https://drive.google.com/file/d/1kf02fMd-HDZp1SQkxk6wprZfbCv11eM2/view?usp=drivesdk
selinux_permissive_v2.0 (1).zip
drive.google.com
ViPER4Android FX(com.vipercn.viper4android_v2)-2.3.4.0(2340)-base.apk
drive.google.com
Trying to get all the files it's hard sometimes to find them so I'm saving you some time. 2.3.4 apk is impossible to find now I extracted the one I'm using
Click to expand...
Click to collapse
It worked thx !!!! How do I choose the driver type? Because I saw there was 3 driver, super quality, high quality and power saving. Or it's already in super quality?
Techguy777 said:
It's going to seem like a lot of work but it's not. Your just going to download magisk files. First thing first you have root and I'm hoping your willing to switch your kernel to permissive mode? You can either do that with permissive v2 magisk module or selinux app. You need to have busybox from magisk installed.
Download 2.3.4 apk
1 switch selinux to permissive
2. Install BusyBox from magisk
Than reboot first
3. Install viper4android v4.4 on magisk manager use volume buttons to pick 2.3.4 install as a user app and if show recommended audio fix hit yes.
Reboot the device and see install the apk 2.3.4 and it should have the driver already installed.
If that doesn't work than you add James dsp magisk module new verison on magisk manager
Than flash audio modification file v4.0 after that
If you reboot again and reinstall the app and hopefully the driver will stick if it doesn't flash 4.4 zip again and reboot and install the apk.
You have to always reinstall the apk because the viper zip uninstalls it and it doesn't ever add it back likes supposed to but the driver stays installed and when you install the app shouldn't be no errors. You will need to grant storage permission for viper4android app.
It seems like a lot but it's really not and once it's installed properly it never uninstalls.
James dsp allows viper to play on phones for some reason but you can turn it off and just use viper that's what I do
https://drive.google.com/file/d/1kf02fMd-HDZp1SQkxk6wprZfbCv11eM2/view?usp=drivesdk
selinux_permissive_v2.0 (1).zip
drive.google.com
ViPER4Android FX(com.vipercn.viper4android_v2)-2.3.4.0(2340)-base.apk
drive.google.com
Trying to get all the files it's hard sometimes to find them so I'm saving you some time. 2.3.4 apk is impossible to find now I extracted the one I'm using
Click to expand...
Click to collapse
Well statut is abnormal, I will try with James Dps but I'm not a fan of these kind of workaround lol, but the link of Google you gave me is deleted?
Techguy777 said:
It's going to seem like a lot of work but it's not. Your just going to download magisk files. First thing first you have root and I'm hoping your willing to switch your kernel to permissive mode? You can either do that with permissive v2 magisk module or selinux app. You need to have busybox from magisk installed.
Download 2.3.4 apk
1 switch selinux to permissive
2. Install BusyBox from magisk
Than reboot first
3. Install viper4android v4.4 on magisk manager use volume buttons to pick 2.3.4 install as a user app and if show recommended audio fix hit yes.
Reboot the device and see install the apk 2.3.4 and it should have the driver already installed.
If that doesn't work than you add James dsp magisk module new verison on magisk manager
Than flash audio modification file v4.0 after that
If you reboot again and reinstall the app and hopefully the driver will stick if it doesn't flash 4.4 zip again and reboot and install the apk.
You have to always reinstall the apk because the viper zip uninstalls it and it doesn't ever add it back likes supposed to but the driver stays installed and when you install the app shouldn't be no errors. You will need to grant storage permission for viper4android app.
It seems like a lot but it's really not and once it's installed properly it never uninstalls.
James dsp allows viper to play on phones for some reason but you can turn it off and just use viper that's what I do
https://drive.google.com/file/d/1kf02fMd-HDZp1SQkxk6wprZfbCv11eM2/view?usp=drivesdk
selinux_permissive_v2.0 (1).zip
drive.google.com
ViPER4Android FX(com.vipercn.viper4android_v2)-2.3.4.0(2340)-base.apk
drive.google.com
Trying to get all the files it's hard sometimes to find them so I'm saving you some time. 2.3.4 apk is impossible to find now I extracted the one I'm using
Click to expand...
Click to collapse
Nevermind, I thought I had to install Jamesdsp "verison", like a special Jamesdsp lol, everything work great right now!!! I really thank you for your time, really ! But just one last question subsiste, how I'm sure it's the super quality driver that is installed and not high quality or energy saving?
Nemix77 said:
Found this thread on XDA for the latest Viper4Android method that also works on the Poco F3 with Root and SELinux enforcing mode.
Link: https://forum.xda-developers.com/t/viper4android.4258655/
Anyone know where I can get the latest collection of Convolver Samples?
Click to expand...
Click to collapse
Always, much better than Dolby, AudioFX and others that I tested.
The "codecs" most important is DDC/Kernel (.vdc and .irs).
When I install them in 2019 liked ClearPlus HD.irs and V4ARISE.vdc.
It's a little hard to set up (Viper and set presets) but when you learn is easy do the same for all headphones.
Maybe it could help.
I recommend you remove that older process installation because you don't need to change SELinux from Enforcing to Permissive (insecure).
In Magisk
1. Install Audio Compatibility Patch (v2.3)
2. Options: Yes, No, Yes, No, Yes, Yes, Reset.
3. Install Audio Modification Library (v4.0), reboot.
4. Instalar Viper4Android FX Legacy v4.4 (v2.5.0.4)
5. Options: Vol +, Vol-, Vol-, Vol +, Reset.
6. Install the JamesDSP module.
7. Disable any native system / ROM equalizer.
Install Viper4Android FX app (v2.6.0.6, Jan/2019) via github or backup
Option: find out him here or Magisk folder (use any root explorer for that).
Path: /data/adb/Modules/Viper (old app)
For newest V4A app use search or Rose.
Choose driver 2.5.0.4, install, restart.
So open the player.
Open Viper4Android FX app, try to apply some profile. Close and open the app if necessary.
Your Headphone need to be plugged.
NOTE: Don't forget to disable other features sound installed on your ROM like stock equalizer (AudioFX, Dolby and other).
To work correctly the Driver Status screen must be:
Driver Version: 2.5.0.4
NEON Enable: Yes
Enable: Yes
Status: Normal
Audio Format: Supported
Processing: Yes
Sampling Rate: 48000
NOTE2: The Viper4Android folder saves the profiles in the root of the internal memory and they need to be replaced in case of Internal Storage was formatted.
I upload the files (older .apk and DDCs/Kernel) on my Mega
18.21 MB file on MEGA
mega.nz
There is some perfis that I did for my headphones (JBL, Xiaomi, Bluedio, Phillips and KZ). You can try them and use it as based to fix all what you need.
Change it to others device you will need just set "Master Gate (limiter)" to 0dB on Alioth.
All them was set for Gemini (this need to be Output Gain -8.0 db).
NOTE3: I prefer the older version and older design. Just the older design app works with the folder "Profile" on .zip without any conversion files.
The new layout migrates the folder "Profile" to "Preset" on new material design. This is not compatible.
NOTE4: Maybe just AML + FX Legacy or 2.7 + JamesDSP is enough. You can remove James app after installed his Module.
Techguy777 said:
It's going to seem like a lot of work but it's not. Your just going to download magisk files. First thing first you have root and I'm hoping your willing to switch your kernel to permissive mode? You can either do that with permissive v2 magisk module or selinux app. You need to have busybox from magisk installed.
Download 2.3.4 apk
1 switch selinux to permissive
2. Install BusyBox from magisk
Than reboot first
3. Install viper4android v4.4 on magisk manager use volume buttons to pick 2.3.4 install as a user app and if show recommended audio fix hit yes.
Reboot the device and see install the apk 2.3.4 and it should have the driver already installed.
If that doesn't work than you add James dsp magisk module new verison on magisk manager
Than flash audio modification file v4.0 after that
If you reboot again and reinstall the app and hopefully the driver will stick if it doesn't flash 4.4 zip again and reboot and install the apk.
You have to always reinstall the apk because the viper zip uninstalls it and it doesn't ever add it back likes supposed to but the driver stays installed and when you install the app shouldn't be no errors. You will need to grant storage permission for viper4android app.
It seems like a lot but it's really not and once it's installed properly it never uninstalls.
James dsp allows viper to play on phones for some reason but you can turn it off and just use viper that's what I do
https://drive.google.com/file/d/1kf02fMd-HDZp1SQkxk6wprZfbCv11eM2/view?usp=drivesdk
selinux_permissive_v2.0 (1).zip
drive.google.com
ViPER4Android FX(com.vipercn.viper4android_v2)-2.3.4.0(2340)-base.apk
drive.google.com
Trying to get all the files it's hard sometimes to find them so I'm saving you some time. 2.3.4 apk is impossible to find now I extracted the one I'm using
Click to expand...
Click to collapse
As I said, you don't need to alter SELinux permissions.
There is a method that you don't modify that.
alefmm said:
Always, much better than Dolby, AudioFX and others that I tested.
The "codecs" most important is DDC/Kernel (.vdc and .irs).
When I install them in 2019 liked ClearPlus HD.irs and V4ARISE.vdc.
It's a little hard to set up (Viper and set presets) but when you learn is easy do the same for all headphones.
Maybe it could help.
I recommend you remove that older process installation because you don't need to change SELinux from Enforcing to Permissive (insecure).
In Magisk
1. Install Audio Compatibility Patch (v2.3)
2. Options: Yes, Up, Yes, Up, Yes, No, Reboot.
3. Install Audio Modification Library (v4.0), reboot.
4. Install Viper4Android FX v2.7.2.1 (driver v2.5.0.4)
NOTE: Viper FX will install the latest app, finish installing Driver v2.5.0.4 on it and running (do some test to confirm).
Afterwards, remove the latest app and install the v2.6.0.6 app.
Install Viper4Android FX app (v2.6.0.6, Jan/2019), required download via github or backup.
Choose driver 2.5.0.4, install, restart.
So open the player.
Open Viper4Android FX app, try to apply some profile. Close and open the app if necessary.
Your Headphone need to be plugged.
NOTE: Don't forget to disable other features sound installed on your ROM like stock equalizer (AudioFX, Dolby and other).
To work correctly the Driver Status screen must be:
Driver Version: 2.5.0.4
NEON Enable: Yes
Enable: Yes
Status: Normal
Audio Format: Supported
Processing: Yes
Sampling Rate: 48000
NOTE2: The Viper4Android folder saves the profiles in the root of the internal memory and they need to be replaced in case of Internal Storage formatting.
I upload the files (older .apk and DDCs/Kernel) on my Mega
18.21 MB file on MEGA
mega.nz
There is some perfis that I did for my headphones (JBL, Xiaomi, Bluedio, Phillips). You can try them and use it as based to fix all what you need.
Change it to others device you will need just set "Master Gate (limiter)" to 0dB on Alioth.
All them was set for Gemini (this need to be Output Gain -8.0 db).
NOTE3: I prefer the older version and older design. Just the older design app works with the folder "Profile" on .zip. The new layout migrates the folder "Profile" to "Preset" on new material design. This is not compatible.
As I said, you don't need to alter SELinux permissions.
There is a method that you don't modify that.
Click to expand...
Click to collapse
You can convert all profile to new format with a magisk module. But here, I'm more interested in the old version 2.3.4.0 with the super driver, discontinued in the new versions
Greenspoof said:
You can convert all profile to new format with a magisk module. But here, I'm more interested in the old version 2.3.4.0 with the super driver, discontinued in the new versions
Click to expand...
Click to collapse
Does't work and duplicate profiles (older profiles, if you don't migrate will works idem).
As I said, I tested both and the most stable is Driver Version: 2.5.0.4 and Viper4Android FX app v2.6.0.6.
Doing it correct, you can allow quality more than 200% compared without it.