Develop Bugs

2.3.4 NEXUS gingerbread android update on HTC HD2

2.3.4 NEXUS gingerbread android update on HTC HD2
This is the update for the nexus which works for the HTC leo.
requirement:
HSPL3, -2.08.HSPL.
Radio Version that supports 576mb RAM(Radio2.15.50.14)
DFT MAGLDR Bootloader.
ClockworkMod Recovery.
Instruction:
1.)Download a NAND Android here for HD2.
2.)Power on your HD2 and don’t let go of the power button.
DFT MAGLDR Bootloader will then be loaded.
3.)Use volume down button to scroll down to 8th option (8. AD Recovery). And press call button to select it. ClockworkMod Recovery will then be loaded.
4.)Use volume down button to scroll down to “mounts and storage” and press the Call button.
5.)Once, you are at the Mounts and Storage Menu. Use volume down button to scroll all the way down to “mount USB storage” and press the Call button.
Connect the USB cable from your PC to your HD2.
6.)Now, at your PC, open up Removable Disk (SD Card storage).
Copy the downloaded ROM (NexusHD2-Gingerbread_V2.7_NAND_(Android-2.3.4)_update) to your SD card root level.
7.)At your HD2, press Call button to unmount USB.
Disconnect the USB cable from your HD2.
8.)Press Endcall button to return to the main menu of ClockworkMod Recovery.
Use volume down button to scroll down to “install zip from sdcard” and press the Call button to select it.
9.)Once, you are at the Install Zip Menu. Scroll down to “choose zip from sdcard” and press the Call button.
Now, you should see “NexusHD2-Gingerbread_V2.7_NAND_(Android-2.3.4)_update“.
Press the Call button to select it.
10.)Now, use volume down button to scroll down to “Yes–NexusHD2-Gingerbread_V2.7_NAND_(Android-2.3.4)_update” and press the Call button to select it.
Installation will be started. It should take a few minutes.
11.)Once you see “Install from sdcard complete“, press the Endcall button.
Now, you are back to the main menu of ClockworkMod. Press Call button to select “reboot system now“.
12.)Your HD2 will then be rebooted and enter NAND Android automatically.
Follow the onscreen instructions to setup Android settings.
Disclaimer:
You are responsible for any damage or anything happen to your device.
Screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Just pushing the THANKS button would do it

Why on earth are you re-posting tytung's rom?
All you have done is take another persons work and posted it as your own with a guide that already exists in the original roms thread..
"NexusHD2-Gingerbread_V2.7_NAND_(Android-2.3.4)_update.zip"
from
[3.May.11][MAG/cLK] NexusHD2-Gingerbread V2.7 [GRJ22/Android2.3.4][Kernel:tytung_r10]
Do you honestly think in your head that its ok to do this? Not only would teh forum be a complete mess if users started re-posting pointlessly but its shows complete disrespect to the devs here.
hrpearl01 said:
Just pushing the THANKS button would do it
Click to expand...
Click to collapse
Err, I think the "Report" button is more appropriate here.

I agree with TheAthiest, ban this son *****!

TheATHEiST said:
Why on earth are you re-posting tytung's rom?
All you have done is take another persons work and posted it as your own with a guide that already exists in the original roms thread..
"NexusHD2-Gingerbread_V2.7_NAND_(Android-2.3.4)_update.zip"
from
[3.May.11][MAG/cLK] NexusHD2-Gingerbread V2.7 [GRJ22/Android2.3.4][Kernel:tytung_r10]
Do you honestly think in your head that its ok to do this? Not only would teh forum be a complete mess if users started re-posting pointlessly but its shows complete disrespect to the devs here.
Err, I think the "Report" button is more appropriate here.
Click to expand...
Click to collapse
+1 mate , its stupid to Repost an already existing rom for over a month now!!

I bet he didn't write this text for himself....
Copy Paste Edit Save.....
GTH....

shail00 said:
I bet he didn't write this text for himself....
Copy Paste Edit Save.....
GTH....
Click to expand...
Click to collapse
Indeed, it looks like this retard simply copied it from the blog url in teh picture.
This has to be the most fail thread ive seen in ages, even worse then k0sh's threads that where deleted/closed lol.

Mods plz temp ban this idiot.

TheATHEiST said:
Indeed, it looks like this retard simply copied it from the blog url in teh picture.
This has to be the most fail thread ive seen in ages, even worse then k0sh's threads that where deleted/closed lol.
Click to expand...
Click to collapse
Reading his posts it looks like he's only just learned how to flash a radio, very fail

FireMAN999 said:
Mods plz temp ban this idiot.
Click to expand...
Click to collapse
+1
..................

Looooool......mdr^^

this is being looked into. closing thread

[SM-T310]Frequently Asked Questions

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This a short list of frequently asked questions about the Samsung Galaxy Tab 3 8" (SM-T310) and the answers often given as a response. It should serve as a starting point for gathering knowledge and finding solutions to many common problems. Please only post in this thread with feedback on how to improve this document. Do not post "Thank you" type responses.
Do not use this thread as a general helping thread.
Q1: How do I root my SM-T310?
First you're gonna need a custom recovery installed.
Download the following files to your computer: Odin, TWRP, Root
Extract Odin into a new folder and then TWRP in Odon's folder. After that's done start the Odin tool and put your device into download mode. To do this, power it off and hold the Home + Volume Down + Power buttons until you see the warning screen.
Once that's done, connect your device to your computer and wait till Odin recognizes it. If it doesn't usually an installation of Samsung Kies would fix it.
After the device is recognized sucessfully click on the PDA button in Odin and navigate to the TWRP file location and load it.
Wait for the PASS message and reboot your device. (Without disconnecting it)
Once done, boot into TWRP and hold your device in portrait mode, tap Reboot on the bottom right of the screen and then select System on the next menu.
Once you do this you will be asked to install root. If that doesn't work for your, copy the Root zip file to your SD Card, boot into TWRP and flash it as a normal zip.
Click to expand...
Click to collapse
Q2: How can I enter recovery?
To enter recovery, power off your device and hold Power + Volume Up buttons untill you see the Samsung Galaxy Tab 3 splash screen and let off the Power button untill it boots you into recovery.
Click to expand...
Click to collapse
Q3: Which is the best ROM/Kernel?
Honestly, there is no "best". It's all based on personal choice. For example; I may like heavily customizing my ROMs whereas you may like it to look at basic as possible. The best thing you can do is to just test out different ROMs/kernels/modems and see which you prefer.
Also, please don't ask which is the best because your post will be deleted as it's against forum rules.
Click to expand...
Click to collapse
Q4: Am I required to backup my data before flashing anything?
No you're not, but it is definitely a good idea, especially when flashing a ROM with an updated base, because if you don't do a backup and then something goes wrong, it means that you'll lose all your apps, data etc.
Click to expand...
Click to collapse
Q5: Does this device have a good battery life?
We all have different apps installed, use our phones for different amounts of time, have different ROMs and kernels installed etc. so we will all experience different results regarding battery life.
Click to expand...
Click to collapse
Q6: I'm not sure whether to get the Samsung Galaxy Tab 3 8"/what other tablets compare to the Tab 3 8"?
The only person who can make you want the device is you. If you're not sure whether to get this tablet, go to your local devices shop which has stock and have a test run of it for yourself. If you're not sure what device to get and want to compare between your choices, please use the following thread - Device Suggestion Thread
Click to expand...
Click to collapse
If you have any suggestions regarding this thread's content, feel free to post them.​

+1 For this Mate. :thumbup:

Help me nexus 7 2013 os not installed

OK so I formatted my device through twrp after having kernels fail on me then I go to boot up the device and nothing happens , I go to
recovery mode then i check i have nothing in my sdcard / storage and when i go to reboot it says "No OS Installed".
Please help me I can't return the device since the bootloader is locked and i can't go into developer mode and enable USB debugging.

epicmoi44 said:
OK so I formatted my device through twrp after having kernels fail on me then I go to boot up the device and nothing happens , I go to
recovery mode then i check i have nothing in my sdcard / storage and when i go to reboot it says "No OS Installed".
Please help me I can't return the device since the bootloader is locked and i can't go into developer mode and enable USB debugging.
Click to expand...
Click to collapse
Can you boot in bootloader mode? (Turn off device and then hold power+down key)
Use wugfresh tool kit and you can solve all problems easily. Find the kit in general section!
Just plug in device and select restore nexus and select, nexus is bricked/bootloop
Jus sit back and it would do the rest

THANK YOU
hnk1 said:
can you boot in bootloader mode? (turn off device and then hold power+down key)
use wugfresh tool kit and you can solve all problems easily. Find the kit in general section!
Just plug in device and select restore nexus and select, nexus is bricked/bootloop
jus sit back and it would do the rest
Click to expand...
Click to collapse
omg thank you so much , you saved my device!!!!

Another problem
Hnk1 said:
Can you boot in bootloader mode? (Turn off device and then hold power+down key)
Use wugfresh tool kit and you can solve all problems easily. Find the kit in general section!
Just plug in device and select restore nexus and select, nexus is bricked/bootloop
Jus sit back and it would do the rest
Click to expand...
Click to collapse
Dude after I got everything software wise fixed , I see a white flashes behind everything
I can see my lockscreen and etc. but theres a annoying flash behind it.

epicmoi44 said:
Dude after I got everything software wise fixed , I see a white flashes behind everything
I can see my lockscreen and etc. but theres a annoying flash behind it.
Click to expand...
Click to collapse
Can you send me some screenshots ?
Hold power+volume down while device is on for screenshots!
Well, I'm not sure if it is light bleed or some software issue!
Secondly did you have this white flash light before or it just came ?

Hnk1 said:
Can you send me some screenshots ?
Hold power+volume down while device is on for screenshots!
Well, I'm not sure if it is light bleed or some software issue!
Secondly did you have this white flash light before or it just came ?
Click to expand...
Click to collapse
No it came after the after I finish rebooting after restoring to stock rom.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

epicmoi44 said:
No it came after the after I finish rebooting after restoring to stock rom.
Click to expand...
Click to collapse
I saw your image, I can't seem to see any white line!
Are you referring to Google now ? The white line with a mic icon on the end?
Can you use a reference point in your image to specify ?

martin 107
Hnk1 said:
I saw your image, I can't seem to see any white line!
Are you referring to Google now ? The white line with a mic icon on the end?
Can you use a reference point in your image to specify ?
Click to expand...
Click to collapse
Its more like glows than lines

epicmoi44 said:
Its more like glows than lines
Click to expand...
Click to collapse
Well, I am afraid you need to explain in details what exactly is happening.
You can use Google translate to translate in English if you are having troubles expressing it. Make sure you use full form/ standard language of your language or it would not be accurate translation!

Hnk1 said:
Well, I am afraid you need to explain in details what exactly is happening.
You can use Google translate to translate in English if you are having troubles expressing it. Make sure you use full form/ standard language of your language or it would not be accurate translation!
Click to expand...
Click to collapse
Lol I speak english don't worry , anyways the problem seemed to fixed on its own I let it drain the whole day and it pretty much fixed the problem.
Thanks anyways

I thought it was a ESL post as well. Must be texting speak. Sometimes I'll read back an Email to myself and think some prepositions and personal pronouns would really help these sentences LOL
For instance in the above sentence a 'that' before: some prepositions - would improve improve readability.
Sent from my Nexus 7 using XDA Free mobile app

Rk3066 1024x600 stuck on boot logo

Hello
I own this device :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I recently tried to update this device with the latest MALAY MOD rom.
The problem was that I didn't had the option to remove all data while updating. Thus resulting in an corrupt install.
I need to get into recovery mode now to install the rom from there, however I do not know how to enter recovery. I've tried all the possible ways that I could find without result.
The touchscreen buttons don't seem to give input to the device, except the power(like) button, if I press this button the screen goes black bit the machine keeps running. Pushing again makes the screen go on again. (this does not restart the device)
The reset button immediately shuts off the device, while holding it the unit stays off. When released the device starts up and gets stuck on boot logo.
I tried contacting the supplier, now 5 days later and still no reaction..
Does anyone have an idea?

try:
press and hold in power button, press rst briefly, let go of power more than 3 seconds after pressing rst

Hi,
I have the same car unit. I have not upgraded, but it does not run. Just booting. I don't know how to restore the factory settings. I can't reset.
Somebody knows? Please help me!
Thanks!

lincoln_dj said:
try:
press and hold in power button, press rst briefly, let go of power more than 3 seconds after pressing rst
Click to expand...
Click to collapse
Thanks for the reply, I just tried this but had no success
The "power button" doesn't do anything if I keep my finger on it (touch buttons).

honvedz said:
Hi,
I have the same car unit. I have not upgraded, but it does not run. Just booting. I don't know how to restore the factory settings. I can't reset.
Somebody knows? Please help me!
Thanks!
Click to expand...
Click to collapse
Did you try to contact your supplier?? He should be able to help.

Hi,
My sellers reply to me!
I can't insert download url.
If you are interested in the solution, send an email!

Thanks to @honvedz for this way to get into recovery mode !
honvedz said:
Hi,
My supplier reply to me.
http://speedy.sh/Akda7/AndroidCarHea...date-steps.doc
password: detidovepefi
Good luck!
Click to expand...
Click to collapse
i tested this and i actually get into recovery mode

This for Apple or android
أرسلت بواسطة iPad بإستخدام Tapatalk

Criticalpain26 said:
Thanks to @honvedz for this way to get into recovery mode !
i tested this and i actually get into recovery mode
Click to expand...
Click to collapse
Hello,
Same problem here but your link doesn't work anymore ...
Slts.

Steve-Austin said:
Hello,
Same problem here but your link doesn't work anymore ...
Slts.
Click to expand...
Click to collapse
Well luckily I saved a copy on my drive
I attached it and here is a link for online viewing :
http://www.docspal.com/viewer?id=dbaemqbp-12570265
Cheers!:good:

Criticalpain26 said:
Well luckily I saved a copy on my drive
I attached it and here is a link for online viewing :
http://www.docspal.com/viewer?id=dbaemqbp-12570265
Cheers!:good:
Click to expand...
Click to collapse
Thank-you for the link. Sadly, the trick doesn't work with my unit.

Steve-Austin said:
Thank-you for the link. Sadly, the trick doesn't work with my unit.
Click to expand...
Click to collapse
You need to unbrick the device with SD firmware tool :
https://forum.xda-developers.com/showpost.php?p=68717214&postcount=877

typos1 said:
You need to unbrick the device with SD firmware tool :
https://forum.xda-developers.com/showpost.php?p=68717214&postcount=877
Click to expand...
Click to collapse
Thanks but I already tried with sd, but it didn't work

Steve-Austin said:
Thanks but I already tried with sd, but it didn't work
Click to expand...
Click to collapse
Oh, not sure about that them have you tried to connect with adb ?

typos1 said:
Oh, not sure about that them have you tried to connect with adb ?
Click to expand...
Click to collapse
There is no usb port in front

Steve-Austin said:
There is no usb port in front
Click to expand...
Click to collapse
You can use ADB wifi or solder a usb port, there are instructions somewhere in the original thread.

You could ask in this thread :
https://forum.xda-developers.com/an...k-bootloop-t3635412/post73459256#post73459256
its for MTCD units but they are related, maybe some one could help you there ?

Fixed: Surface RT to Windows 10 ARM goes wrong...

Hello,
First of all thanks to read my thread!
I was following this thread and everything was okay until page 7
I was always getting a error with this command: "bcdedit /set {default} testsigning on && bcdedit /set {bootmgr} testsigning on" but i was always getting errors and then i have followed the steps on page 8 that let me remove files in the EFI partition (i had backup the original files to my desktop) and add new files from a zip file. then i was needed to restart Windows and then i was getting a error:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
When i touch the Windows touch on my keyboard i get this error:
What i have already tried, make a recovery USB but i can't boot this one because my VOLUME DOWN button doesn't work...
How i can get fix this?
(i was always entering the recovery mode from when windows was started up settings -> recovery -> restart and with this way i had started the command prompt in the recovery mode.)
I read here that alexenferman had the same error https://forum.xda-developers.com/wi...dows-10-build-15035-surface-rt-t4011147/page5
alexenferman said:
Here is the command you will have to type:
bootrec /rebuildbcd
Click to expand...
Click to collapse
But i go see how i can open the command prompt on a different way.
I don't find any trick to start the surface without the volume down button...
Thanks in advance

Well, that's sad..
You can try using a keyboard with media keys, and press the volume up/down on the keyboard but IDK if it works...
Otherwise, I think that the only way would be to open the device and try to replace the button.
If anyone else knows another possibility please post...

alexenferman said:
Well, that's sad..
You can try using a keyboard with media keys, and press the volume up/down on the keyboard but IDK if it works...
Otherwise, I think that the only way would be to open the device and try to replace the button.
If anyone else knows another possibility please post...
Click to expand...
Click to collapse
Hello i tried this but it doesn't work
I measured the buttons myself with a multimeter and this is the same for both buttons, so I suppose this is OK since volume + still worked. So either there is something wrong with that connector or with the volume button wiring.
But is there sometimes an option to access the memory? So that I can put those files back in the efi partition? I have completely separated the SURFACE here, but unfortunately I cannot find an option yet.
In a laptop you put the plug on your HDD and you have left here this is more difficult ...
Can you also get into the recovery menu without the volume down button, but for example via the volume down button on an earpiece (sound?)
And can you tell exactly what you did to start the recovery?
Thanks

Hello,
Good news, i have repaired the up/down button. (because i don't find a new button)
First I had measured the keys myself and they turned out okay, after looking closely I saw a wire break and soldered a wire over it (I don't find a new up-down) volume button.
Okay, the pictures seem to be tinkered with, but know that this is just something super small, that button is less than 3 cm in total (photo is extremely enlarged).
Ah yes it works back
Meanwhile also installed Windows 10 on it and it also works
Does anyone know if there is a Dutch language pack for that Windows 10 RT? (Dutch Belgium or Dutch Netherlands in het configuration panel Windows said there isn't no language pack available).
Second question
I have broken the ZIF connector (battery) from my Surface RT, is it true that this is the AYF532835 ZIF connector? I had read it somewhere, but the one who wrote it was not sure ...
Thanks in advance.
And sorry for my bad english.