I really need help..I tried to flash a rom on my HTC but the preloader got corrupted xo my phone went hard bricked. Plugging the phone into a computer just shows a red led and the computer shows nothing in the device manager.
I tried uninstalling the MTK Preloader VCOM driver and reinstalling it but that still didn't work.
Even pressing volume keys while connecting still gave nothing.
I also tried disconnecting the battery and reconnecting the phone to the computer but still nothing.
If there is anyone, please help me.....
I need to unbrick my phone................... I am begging, please help me.
Related
I have a rooted Samsung galaxy s2 with a custom ROM and it worked fine but after i installed some cellular drivers which were not for my model it stopped working i tried unbrick jig ive tried the all of the key codes and odin but nothing but if i use the same cord and port for my computer windows says that the device must be formatted to work i tried formatting it but then it said windows cannot format this device anyway it does nothing i dont know if it charges or not it does not vibrate, make any sound, just nothing. i installed the media tech chipset driver on a phone with no media tech chipset ao can i get some help? Thanks :highfive:
Nothing?
i was expecting at least one reply at this point... please help
Try putting your phone in Download mode
Your phone is off, hold both volume keys and connect your phone through USB with both volume keys still down.
If you do not get to download mode, your phone is hard-bricked and it's tougher to fix it
Hello,
i tried flashing my Alcatel 5020x with SP Flash tool today. I tried once and everything went well except that it got stuck at the boot logo.
i then decided to format all except bootloader. The phone does not at all respond to anything after that. When plugged into computer or power it just has its led indicator on.
The PC does not detect it with or without battery. Not even any plug in/out sound on the PC.
I've tried different ports, uninstall drivers etc, nothing works.
Please Help!
If someone knows Test Point method for this device then please share!
My op3 got bricked during installation of MIUI8 in multirom, I first installed the ROM successfully and then click on reboot. The device did not respond after that. Tried connecting to charger/ PC . It is not being detected in PC. Any solutions?
Try to get in the fastboot mode:
turn off phone. press and hold volume up and connect to pc.
It should at least detect a QHSUSB device in the device manager
Dude i got the exactly same problem
i was installing miui8 too and then i clicked on reboot
i think you just need to unbrick it but i cant try it because i dont have a computer here
Use it or paperweight or you can search!
So i was using my phone and decided to restart it after updating my adaway files but my phone never turned back on. The two press the power button screens did not show up either. I tried to uses the MSMdownload tool since i thought my phone was somehow bricked but that didnt work either, it just kept restarting the download process after everything was completed. my computer makes a sound when its connected and it connects correctly as a quallcomm 9008 device but even after all this nothing is working. has anyone experienced something like this or does anyone have any advice?
did you try to long press both power button and vol up ...you should feel a vibration...
maybe it's not turned of maybe it's error causing the screen to be off... also is there any heat?
Which method of the unbrick tool did you use? First or second? If the first, then maybe you should give the second also a try.
Sent from my ONEPLUS A3003 using Tapatalk
I've tried everything and I used th me second method yet nothing happened. I can see my phone get recognized by the computer and get listed on the MSN device list yet nothing happens after it finishes the process. After the green line shows up telling me that it's completed everything the process restarts writhing a few minutes unless I unplug it. No vibration no nothing the phone just died on me after I restarted it .
Try doing MSM on a different PC with all drivers installed , hope it helps
Try to repeat flashing again, there is no other way. Use method 2only. Extract tool again and try flash.
When I was used Xperia Z1, I bricked my phone with a soft brick. So I installed driver in my PC and flash Kernel though FASTBOOT(ADB) either it's not show Device in my PC (I show just "Unknown Device").
After that my phone can connect to my PC again (Now It shown C9303 or something that meant it know it's a phone).
So I can flash by Flashtools again. Soft brick is not scary as Hard brick, you'll find some way to bring it back easily.
Hope this help!
PS. Bricked Phone is WEAK in Battery, always connect it with charger.
Hi users, recently I wanted to go back form miui pie to oreo using this thread : https://forum.xda-developers.com/redmi-note-5-pro/help/how-to-revert-miui-10-pie-to-miui-10-t3940244
I had some problems with flashing, phone got disconnected from pc during fastboot flashing (loose cable) and after reconnecting I couldn't flash anything so I restarted the phone. Now all I've got is black screen (the backlight works but I can't see anything) I can restart the phone when holding power button and doing the combination of power up and vol+, but it's the same. If I connect the phone to pc in this conditon nothing happens, I can't hear any sound indicating that phone is connected, nothing in device manager, I even disconnected the battery and tried the edl pins but it's the same result, pretty weird. Can anyone give me any hint?
Verity. said:
Hi users, recently I wanted to go back form miui pie to oreo using this thread : https://forum.xda-developers.com/redmi-note-5-pro/help/how-to-revert-miui-10-pie-to-miui-10-t3940244
I had some problems with flashing, phone got disconnected from pc during fastboot flashing (loose cable) and after reconnecting I couldn't flash anything so I restarted the phone. Now all I've got is black screen (the backlight works but I can't see anything) I can restart the phone when holding power button and doing the combination of power up and vol+, but it's the same. If I connect the phone to pc in this conditon nothing happens, I can't hear any sound indicating that phone is connected, nothing in device manager, I even disconnected the battery and tried the edl pins but it's the same result, pretty weird. Can anyone give me any hint?
Click to expand...
Click to collapse
You are in situation similar to me. https://forum.xda-developers.com/re...e-5-pro-unbrick-project-t3940446#post79743110
But I am still struggling with this phone, issue no resolved yet.
yawarniazi said:
You are in situation similar to me. https://forum.xda-developers.com/re...e-5-pro-unbrick-project-t3940446#post79743110
But I am still struggling with this phone, issue no resolved yet.
Click to expand...
Click to collapse
Yeah, but the point is, you can connect to pc and flash things and I can't do anything, I suspect my computer fried usb board or something on the motherboard bc it's impossible I can't get qualcomm hs-usb loader 9008.
As it turns out, after rebooting the pc, it doesn't boot anymore. Phone doesn't work and pc. Coincidence? formatting pc was needed (pc works now), could it be a virus or my power supply simply gave too much voltage to the usb? I was doing everything during the storm, y'know, thunders.. I don't know anymore, I tried even connecting to a different pc and the result is the same. I can't do anything on my phone, could it be broken usb board?
EDIT: It connects now in edl, I was shorting the pins incorrectly (can't touch the ground [shielding] while shorting the pins). Pls close this thread.