Hi, I bought a branded\locked e975. I was able to network unlock it via eBay and unbranded with this tutorial, I installed one of the generic portuguese firmwares and all was well. : )
But when I connected the phone to the PC the LG PC Suite told me there was an upgrade available, I updated the phone and now I am on a branded firmware again.
Is there anything I could do after debranding the phone to have LG PC Suite to check\install only the same unbranded firmware. Or after installing a generic firmware I shouldn't use PC Suite anymore to upgrade my phone.
Thanks
Mario
sorry,I'm weak in english.
When I fisrt get my s9(g960u),It seem to from sprint,because some software of sprint in phone
My SIM cards are working properly.I don't hava sprint sim card.(I 'm not in USA).It's unlock or not?
but sprint Omadm Prompt activation not completed,It's annoying.
So I use odin to g960u1 firmware,
but my sim card can't work well in it,just Identify my mobile number,but can't Phone calls and internet access.
then i odin to g960u verizon firmrware ,but LTE don't work.
i odin to sprint firmware,find it can't ota,cann't create apn ,can't Identify my mobile number(It is ok when I fisrt use it),but Phone calls and internet is ok
How can i get ota agian?
Did I do something wrong on my phone .When I use flash to u1 firmware,I use modded Odin.I never open Developer mode when I flash it.but it still Success.And i Unplug my SIM card before flash.though I flash sprint firmware ,it still XAA/XAA/VZW in software information.
I'm in android level 2018.8.1
first of all i shoud state im over in the UK using SKY mobile(02 signal). So I picked up a used S9 last week and every thing seemed ok but i could not understand why is would not update from android 8 to 9. it turns out is a grey import sm960u USA phone and would not update unless the orig carrier sim was in and i was in the usa. i checked its imei and belived it to be on sprint SPR and downloaded the latest firmware and installed via odin. Now the phone will now not connect to my 4G, i have now found out that Sprint uses CMDA and not GSM that i require in UK .Stupidly i did not check which frimware version the phone was running before flashing it. Is there a USA firmware i can install which will get me back on 4g, maybe without carrier bloatware. i understand that i cannot flash it with sm960f firmware but maybe able to use sm960u1 firmware as this is the plain unlocked version
Disclaimer: I am not responsible for any bricks/ issues you may encounter following this guide. Although, I will do my best to try to help you if something were to go wrong.
MAKE SURE OEM UNLOCK IS ENABLED UNDER DEV SETTINGS BEFORE YOU DO ANYTHING BELOW
Update 2: 3/11/2021 : I see maybe deleting the .ta files may help avoid soft bricking, feel free to try it I have not personally tested yet to see if it works.
Update#3 3/13/2021 : If you are following this guide recently make sure you update to Android 11 first! Do not do any updates after the first one to Android 11! Then the flashing should work just fine. Tested and verified this on Taiwan XQ-AT52 to 51 firmware
Hello, I've managed to successfully flash AT51 firmware on my AT52 without issue using Newflasher.
Step 1 download = the US firmware/ whatever region is needed for you and new flasher/ the sony xperia drivers needed to flash the firmware to your device. Extract it to your desktop. Install the Xperia driver from newflasher if you need to/ haven't yet. Newflasher needs to be extracted into the same folder where the firmware files are that you downloaded from Xperifirm. This step is crucial!
Step 2 : Power off your Xperia and put it in flash mode by pressing down on the volume and connecting it to your PC via usb. (Do not use the USB C cable that came with the phone use a different one if you have one) You'll know it is in flashmode if the notification LED turned green and the screen remains off.
Step 3 : Open newflasher.exe
Step 4: type n then press enter
Step 5: type n again and press enter
Step 6 : This is when you should get to the flashing stage. Press Y and enter to everything you are prompted to. type y for yes to. This for me resulted in a successful conversion over to AT51.
Step 7: Once everything is done and it says you are safe to disconnect your phone please do so and then press and hold your power button until the phone boots up.
At this point you should have a fully working AT51 firmware!
Bare with me as I"m working on getting developer access for androidfilehost and will upload the files asap. In the meantime you can download newflasher and the firmware files yourself using Xperifirm if you don't wanna wait for me to upload.
Xperifirm: https://forum.xda-developers.com/cr...xperifirm-xperia-firmware-downloader-t2834142
Newflasher: https://forum.xda-developers.com/cr...gress-newflasher-xperia-command-line-t3619426
Can you please help? I followed and i got a corrupted message and power off in 5 second.
I tried xperia companion, failed.
I tried to reflash newflasher with original firmware again, failed.
Please help.
tiunilohmu said:
Can you please help? I followed and i got a corrupted message and power off in 5 second.
I tried xperia companion, failed.
I tried to reflash newflasher with original firmware again, failed.
Please help.
Click to expand...
Click to collapse
Can you tell me the model of your xperia phone? If you can still get it into flash mode when the notification LED turns green you may still be able to recover it.
Hi, I finally managed to restore it. I have to remove all the ta files to flash it, then it booted up.
Thanks for your respond.
my device is corrupted please help
blegs said:
my device is corrupted please help
Click to expand...
Click to collapse
what did you do to corrupt it?
Lennyuk said:
what did you do to corrupt it?
Click to expand...
Click to collapse
I have using newflasher
After using 3 time xperia companion it work normal again
Hi, I didn't find this thread until after I made an attempt at flashing the device. I followed the instructions from the link below and ended up with the device saying it's corrupted.
https://www.xperiablog.net/2018/01/...-firmware-for-xperia-xz-premium-xz1-and-more/
I tried redownloading newflasher as well as redownloading the firmware I wanted as well as a new cable and that did not help. I reflashed it with this procedure listed above and it did not help.
Xperia companion won't let me do anything because it says the device is locked even though the device was not locked and there doesn't appear to be a way to unlock it. edited to add that I did get xperia companion to repair it successfully
edit again to advise I succeeded only after doing n and enter a third time then hitting y and enter for the final flashing step and that was successful in getting it updated correctly
Would it work to unlock my phone
Thanks for the guide!
Can I ask few questions please?
First is do I need to have my bootloader unlocked? I enabled OEM unlock setting in developer settings but that is only one thing I did.
And the second one is could this flash unlock my phone?
I am in this situation where my AT51 won't work with other sims except for Vodafone. UK.
I stayed with them for 30 days, (required time frame to get your phone unlocked) requested unlock code and it has been more than 10 working days but still have not received the code.
So today I did some searching online and found the service code to check if my phone is locked to a network and to my surprise it says it's not. So I am guessing that they have limited my phone to using only their sim through some other means andnot buy locking my modem. But this is ofc just a guess.
I kept chatting with the customer support and he keeps saying wait for the code which I do not believe is going to come, they have to unlock it on their end. But I am not sure about that. I don't think they are sure either..
Basically I'll wait fem more days maybe they will unlock it but if they won't when I am thinking maybe my modem is not locked and I could unlock it by flashing different ROM?
Or do you think this won't work?
Sorry for a rambling post. Looking forward to your reply. Thanks!
Mazvydelis said:
Thanks for the guide!
Can I ask few questions please?
First is do I need to have my bootloader unlocked? I enabled OEM unlock setting in developer settings but that is only one thing I did.
And the second one is could this flash unlock my phone?
I am in this situation where my AT51 won't work with other sims except for Vodafone. UK.
I stayed with them for 30 days, (required time frame to get your phone unlocked) requested unlock code and it has been more than 10 working days but still have not received the code.
So today I did some searching online and found the service code to check if my phone is locked to a network and to my surprise it says it's not. So I am guessing that they have limited my phone to using only their sim through some other means andnot buy locking my modem. But this is ofc just a guess.
I kept chatting with the customer support and he keeps saying wait for the code which I do not believe is going to come, they have to unlock it on their end. But I am not sure about that. I don't think they are sure either..
Basically I'll wait fem more days maybe they will unlock it but if they won't when I am thinking maybe my modem is not locked and I could unlock it by flashing different ROM?
Or do you think this won't work?
Sorry for a rambling post. Looking forward to your reply. Thanks!
Click to expand...
Click to collapse
You do not need the bootloader unlocked as you are flashing official firmware.
Anyone know if you can flash a XQ-AT52 to a XQ-AT51 and then back to the XQ-AT52 firmware?
Sent from my XQ-AT52 using Tapatalk
I know this thread is a few months old at this point but I'm really struggling to flash to XQ-AT51. I've successfully flashed from XQ-AT52 Hong Kong (my original firmware) to the Taiwan version which is slightly better because of the messaging compatibility but I really want to get the US version. I have tried at least 20 times over the course of a full day and I have not been able to flash the US firmware without getting an error saying "Your device is corrupt It can't be trusted and will not boot" every time. I have repaired it back to the Hong Kong firmware (back when that was the one I had) and to the Taiwan version once I had that installed. But I have never gotten the US firmware to take without the "Device is corrupt" error.
My phone is the Sony xperia 1 mark 2 running the then default XQ-AT52 Hong Kong, and now running the default XQ-AT52 Taiwan. I've been trying to flash to XQ-AT51 US. I've been using newflasher v39 and the US firmware downloaded for xperifirm v 5.5.0.
So I was able to flash from the hong kong version to the Taiwan version and back with no issues at all. But I'm still unable to flash to the US version without the "Your device is corrupt It can't be trusted and will not boot" error that seems to happen every single time I try to install the US firmware.
Can someone make me a favor and can upload the latest ftf of Android 10 for the Xperia 1ii Single SIM?
ProjectBlitz said:
So I was able to flash from the hong kong version to the Taiwan version and back with no issues at all. But I'm still unable to flash to the US version without the "Your device is corrupt It can't be trusted and will not boot" error that seems to happen every single time I try to install the US firmware.
Click to expand...
Click to collapse
The 1 II has downgrade protection, so as long as the firmware version of the US version isn't the same or newer than the highest version you've ever used you're gonna get the corruption error.
What you could try is flashing the newer EU version and then flashing only the older US customisation image. That's what I did for a while since US firmware was older than EU firmware, and it worked. Not sure if it'll work with Android 11.
ProjectBlitz said:
I know this thread is a few months old at this point but I'm really struggling to flash to XQ-AT51. I've successfully flashed from XQ-AT52 Hong Kong (my original firmware) to the Taiwan version which is slightly better because of the messaging compatibility but I really want to get the US version. I have tried at least 20 times over the course of a full day and I have not been able to flash the US firmware without getting an error saying "Your device is corrupt It can't be trusted and will not boot" every time. I have repaired it back to the Hong Kong firmware (back when that was the one I had) and to the Taiwan version once I had that installed. But I have never gotten the US firmware to take without the "Device is corrupt" error.
My phone is the Sony xperia 1 mark 2 running the then default XQ-AT52 Hong Kong, and now running the default XQ-AT52 Taiwan. I've been trying to flash to XQ-AT51 US. I've been using newflasher v39 and the US firmware downloaded for xperifirm v 5.5.0.
Click to expand...
Click to collapse
im in the us and was looking to the 256gb version (i think its taiwan). is the hong kong or taiwan version missing anything? or is the only reason to flash to US to get better coverage with us carriers?
GreeleyXda said:
im in the us and was looking to the 256gb version (i think its taiwan). is the hong kong or taiwan version missing anything? or is the only reason to flash to US to get better coverage with us carriers?
Click to expand...
Click to collapse
It's for better coverage and for VoLTE and Wi-Fi calling support. Also if you get a HK one with Android 11 you will be unable to flash the US firmware, because it is still on Android 10; and the phone has anti-rollback protection.
it arrived on 10 still, but its bugging me to update.
THISISINSANE said:
It's for better coverage and for VoLTE and Wi-Fi calling support. Also if you get a HK one with Android 11 you will be unable to flash the US firmware, because it is still on Android 10; and the phone has anti-rollback protection.
Click to expand...
Click to collapse
This isn't the case now since the US models have Android 11 too now
Can anyone confirm that this process has to be done using USB 2.x? I've read in a separate post that newflasher isn't compatible with USB 3.x, which is currently what all my computer use. Also, should I be using the newest version newflasher?
EDIT: Tried on USB 2.0 and it worked perfectly.
Need some help guys. I am based in Australia and swapped an iPhone for the Z Fold 3. Went through the usual connection process with my sim and esim whilst connected to wifi. All was well as it allowed calls and received calls when I was home. As soon as I stepped outside my home where it was trying to use the network, it does not work. It keeps saying not registered on network. Tried to manually select network via settings, checked all APN settings from the network and all is ok. Even tried 3 different carrier sims (Vodafone, Optus and Telstra) yet still no matter what this phone will never connect to any carrier network without wifi. From there I tried 3 different firmwares from Sam mobile just in case it had corrupt firmware. Both android 11 and 12 will not work. Need help guys please. Any suggestions?
Two options
1. Get into recovery and do a factory reset
2. Flash the latest firmware ( F926BXXS1BVB3 ) , firmwares are now Multiregion so no problem with that
Download Galaxy Z Fold3 5G SM-F926B (VAU) F926BXXS1BVB3 in Samfw - Samsung firmware download
Galaxy Z Fold3 5G SM-F926B (VAU - Australia) F926BXXS1BVB3 S(Android 12) samsung firmware download all model, lastest, fast update, completely free and fast speed in Samfw.com ✅
samfw.com
Follow instructions there ...
-----
If that doesn't work , maybe you lost your EFS partition ( it contains your IMEI info ) and that is a big problem
You will have to read a lot here @ xda to try to recover it ( if it'spossible somehow )
Thank you kindly for the information and reply as it is really appreciated.
I can see both imei numbers on the device if this is what you mean? Ironically when the phone is on WiFi with WiFi calling enabled and the simcard plugged in, it allows me to make calls with my number sending to the recipient, it just won't do the same when the WiFi is disabled, I can not communicate out by data nor voice and it keeps saying "not registered on network." I have checked and the phone is not network locked and is clear for use. I will try the firmware link you have sent however if this does not work, may I ask what you think may be next?
To add I have tried various firmware which did not work either.
Can anyone help with this as the above unfortunately did not work.
bruangie said:
Can anyone help with this as the above unfortunately did not work.
Click to expand...
Click to collapse
When you flashed stock firmware , did you use CSC or HOME_CSC ?
You have to use CSC , to get a fresh install
If possible , once flashed get into recovery to perform a Factory reset from there , maybe this can get back the EFS partition that seems to be corrupted
again ... DON'T use HOME_CSC
pvillasuso said:
When you flashed stock firmware , did you use CSC or HOME_CSC ?
You have to use CSC , to get a fresh install
If possible , once flashed get into recovery to perform a Factory reset from there , maybe this can get back the EFS partition that seems to be corrupted
again ... DON'T use HOME_CSC
Click to expand...
Click to collapse
Thank you for your reply. I did use csc and followed all your instructions. Unfortunately still the same. I am so lost as to what to do as I love the phone but can not seem to fix it.