I changed the battery of my asset 1 and when I started it happened to start an update, but in the middle of this process the battery ran out and was no longer able to charge it. if I was without firmware I would like a help to put a firmware in it
Welcome to XDA! This is an English language Forums! Regards
Related
Hello ! Good morning everybody !! I have tried to make a firmware upgrade to my ETEN P700, but I've loaded only the first part of the software PKHer_217.nbo. Then the phone told me " everything ok , so I switched it off, but now the phone doesn't work anymore. I got only a blank screen or neither that. Could anyone help me ? I'm practical in electronic, so I can make many things, such bridges, new cables, external supply and so on . Please HELLLPPPP !!!!!!
Dear Friends,
I was flashing ROM to my hx4700 (upgrade from the first version of MW 5 to the second official version) when due to power failure my computer switched off and the connection with HP was lost. It was exactly on 62% and now I have a BIG problem..
When I am trying to flash the update again, it says "Incorrect Language. Update cannot continue". It shows ROM version as 4.xx and language as "unknown" (upgrade is for version 2.01.05).
When I try the previous version it shows model: unknown, ROM: unknown, and language: English. Update to version 2.00.39. The update starts.. from 0.1% to 1% (each 0.1% in abt. 15 sec) but then stops.. It shows Error 606 - timeout.
What can I do?? Can I try flash a new ROM from SD card? And if yes, how to do it??
HELP ME PLEASE !!
EdJessops said:
Dear Friends,
I was flashing ROM to my hx4700 (upgrade from the first version of MW 5 to the second official version) when due to power failure my computer switched off and the connection with HP was lost. It was exactly on 62% and now I have a BIG problem..
When I am trying to flash the update again, it says "Incorrect Language. Update cannot continue". It shows ROM version as 4.xx and language as "unknown" (upgrade is for version 2.01.05).
When I try the previous version it shows model: unknown, ROM: unknown, and language: English. Update to version 2.00.39. The update starts.. from 0.1% to 1% (each 0.1% in abt. 15 sec) but then stops.. It shows Error 606 - timeout.
What can I do?? Can I try flash a new ROM from SD card? And if yes, how to do it??
HELP ME PLEASE !!
Click to expand...
Click to collapse
No Problem. Your 4700 will be fine. Go to http://forum.brighthand.com/showthread.php?t=246529 and download the bootloader from Chrismrulz (click on his signature). Use it to flash any ROM you like. This bootloader works like a charm.
Regards,
Sanjay
Many Thanks !!
Sanjay, you are GREAT !!)
Many many thanks) Only 5 hours ago I was devastated, now I am happy - everything is working again) I deserved a bottle of bear - pls let me know if you are ever in London or Vancouver, ok?
I am going to offer my thanks to Chris Mrulz as well. You are absolutely right - the bootloader works like a charm)
The last question - I upgraded it now to version SL6V3. Should I upgrade to CEOS_new?
Kind Regards,
Edward
EdJessops said:
Sanjay, you are GREAT !!)
Many many thanks) Only 5 hours ago I was devastated, now I am happy - everything is working again) I deserved a bottle of bear - pls let me know if you are ever in London or Vancouver, ok?
I am going to offer my thanks to Chris Mrulz as well. You are absolutely right - the bootloader works like a charm)
The last question - I upgraded it now to version SL6V3. Should I upgrade to CEOS_new?
Kind Regards,
Edward
Click to expand...
Click to collapse
Glad to hear your 4700 is alive. As for newer ROMs, all of the WM6.1 you see in this forum on the 4700s is based on ports from other devices. There has been no significant update and frankly, not likely to be. For me at least, later versions do not offer functional benefits that I can use. IMHO, functionality is more important than gaining the last nano-second of speed. I have not been able to improve on the basic SL61V3, and will leave it alone for now. It works well enough although I personally prefer the Lite version without IE and WMP.
My advice would be to try various ROMs to see which ones work best for you. I'm sure you will find one that suits.
Regards,
Sanjay
Hi, some months ago I bought a S4 mini. I'm Italian so when I bought the phone it had a Jelly Bean firmware.
Samsung has not released a KitKat firmware for the Italian phones yet, so I used Odin to flash a KitKat stock firmware, I used the Spanish firmware (I9195XXUCNE6).
It works really good but I have a big problem with push notifications: they don't arrive in time or they don't arrive at all!
So I've installed PNF but it doesn't fix the problem.
When push notifications don't work and I open Play Services Monitor in PNF, I read NOT CONNECTED!
So I've taken a screenshot of the Events Log and the result is the first image in the attachments.
Do other people with KitKat have this problem? What can I do to fix that kind of error (FailedHeartbeat)? Could it depend from my Internet network?
Moreover, some days ago I took another screenshot and the error is in the second image in the attachments.
Thank you in advance and apologize for my bad English
Hi i'am italian boy and i buy one smartphone s4 mini whit restriction orange line,i unblock whit tecnical support shop but now i have one problem,the battery is very hot and during only 2 hours,remeber i change the lcd screen complete and the all operation is success.I try to reinstall the stock firmware of this smart and the tecnical say:using odin,but this phone on recovery mode say kernel of csc,i think for unblock sim orange because i use sim italian.Please help me because i don't know tu use this phone,i work on china mobile is rooted kind iocean and neo but for samsung i dont know.I see is near the exit the new firmware lollypop is a true? it's a possibble? Thanks for my resolved. My smart is rooted.
The place to go for your device is http://forum.xda-developers.com/galaxy-s4-mini . You originally posted this in the "full size" S4 forums, where very few people are likely to have your device. Please be patient while the thread is moved.
rolcia2 said:
Hi i'am italian boy and i buy one smartphone s4 mini whit restriction orange line,i unblock whit tecnical support shop but now i have one problem,the battery is very hot and during only 2 hours,remeber i change the lcd screen complete and the all operation is success.I try to reinstall the stock firmware of this smart and the tecnical say:using odin,but this phone on recovery mode say kernel of csc,i think for unblock sim orange because i use sim italian.Please help me because i don't know tu use this phone,i work on china mobile is rooted kind iocean and neo but for samsung i dont know.I see is near the exit the new firmware lollypop is a true? it's a possibble? Thanks for my resolved. My smart is rooted.
Click to expand...
Click to collapse
I am not 100% sure what you are asking. I assume you are talking about a S4 Mini LTE?
For the overheating, it could be a dirty flash, so make sure you cleaned all caches, system etc.
OR
Google Apps going nuts. You can use Better Battery Stats to check for that (what is draining the battery in partial wakelock section)
Then I think you asked for lollipop flashing? Go here for step to step intructions:
- Firmware thread: http://forum.xda-developers.com/showthread.php?t=3100159
- Q&A thread: http://forum.xda-developers.com/galaxy-s4-mini/help/qa-cyanogenmod-12-1-s4-mini-3g-lte-t3100713
Regards
Chris
chris42too said:
I am not 100% sure what you are asking. I assume you are talking about a S4 Mini LTE?
For the overheating, it could be a dirty flash, so make sure you cleaned all caches, system etc.
OR
Google Apps going nuts. You can use Better Battery Stats to check for that (what is draining the battery in partial wakelock section)
Then I think you asked for lollipop flashing? Go here for step to step intructions:
- Firmware thread: http://forum.xda-developers.com/showthread.php?t=3100159
- Q&A thread: http://forum.xda-developers.com/galaxy-s4-mini/help/qa-cyanogenmod-12-1-s4-mini-3g-lte-t3100713
Regards
Chris
Click to expand...
Click to collapse
Thk Chris you understand all,for battery i try the battery doctor app but whitout success the problem is when use internet whit 3g and telephon to call the motherboard is very hot about area cpu,this is second time to change the display complete because is broken....my son.....and the last time the cpu is very hot when usage the phone,example if not use phone and this is connect whit my wifi the battery during 4 days,if use the problem is cpu is very hot and the battery go down immediately.i dont know if the rom orange installed is correct but this work mahe china shopping in italy and i buy for this.i think the rom is original but the tecnical man china use the app csc change for unlock my sim italian.I dont know if install the rom italian whit odin is correct and i read need take the pit for the new rom italian install.Thk for my resolved problem.
Hello I just bought Galaxy watch and I believe it was manufactured in Saudi arabia. I'm missing some apps such as spotify and galaxy app of my phone is in arabic and I can't seem to change that.
Is there a way for me to switch the region of my watch to something like USA so that I could install Spotify. and I know this isn't related but how do I change the region on Galaxy Wearable ? when I acess galaxy apps from it everything is in arabic which is really annoying.
Thank you !
Are you able to identify your exact Watch Model Name?
Example...
SM-R800 or SM-R810 or SM-R815F or...
Best Regards
Model: SM-R800
Serial No : R5AKA0NGARA
Tizen version: 4.0.0.1
Software version R800XXU1BRJ4
and it's the 46mm version
I hope that's helpfull
You can change to XAR, this is the CSC/Sales Code for USA...
With Tool SDB...
Look here:
https://forum.xda-developers.com/gear-s3/how-to/guide-how-to-change-gear-s3-r760-csc-t3784226
Code:
launch_app csc-manager.csc-pre-configuration
If you wish to know your currect active CSC... you can use this:
Code:
launch_app csc-manager.csc-verifier
OWN RISK!
Short confirmed here for SM-R8...
https://forum.xda-developers.com/ga...r805f-csc-change-howto-esim-rsp-v2-x-t3848292
Best Regards
Thank you @adfree !
quick quiestion. if I go through with this and reset my watch. will the region go back to what it was ?
if I go through with this and reset my watch. will the region go back to what it was ?
Click to expand...
Click to collapse
This is not temporary... this is static...
To Reset to "default" you have to know your CSC/Sales Code... and go the same way to choose it...
So I suggest first... identify your active CSC...
Code:
launch_app csc-manager.csc-[B]verifier[/B]
Then NEXT step to change...
Best Regards
Thank you so much. Last couple of questions. excuse my noob tech skills :silly:
but will this void my warranty ( as far as I understand I can switch back csc to what it was and they won't notice I changed that). and will I still get future updates or is this process is similar to rooting on android phones
again.. I'm noob at this
excuse my noob tech skills
Click to expand...
Click to collapse
NO problem.
Please remember thes tiny hints...
A
I am User... not Samsung Seller nor in any other kind married with Samsung...
B
What ever you see CSC/Sales Code related... is "against" Samsung policy/rules crap...
Otherwise they would give you official instruction.
C
CSC/Sales Code aka region lock/crap Branding Warranty Tales...
Serial Number detects Original Factory CSC...
This is why they ask you about Serial Number...
D
OWN RISK
What ever I say/write...
and if you fail...
You can never say... but adfree told...
Please choose wisely...
Or ask Samsung and/or your Seller...
Best Regards
@adfree hello... whenever I try to launch SDBstarterKidv1\sdb_2.2.60_windows-64\data\tools --> sdb-run . the window closes immediatly . what should I do ?
I managed to take a screen shot of the cmd window before it closes and it says:
The system cannot find the path specified.
The system cannot find the path specified.
It turened out I was openning the wrong file
thank u so much for ur help
however I followed the steps and it seemed ti work. it reset and then I got samsung pay on my watch... but for some reason galaxy wearable is still in arabic even after I deleted it's data and used a VPN. do u know how I can make it in English. also I still can't find spotify
I've finally managed to download spotify... my SIM card was giving away my location despite using a VPN but now it completly looks like I'm from the US thx for the helkp throughout the way @adfree and the quick responds earlier <3
Hi . Do i still gwt the updates if i change csc of my watch. And do i get them the same time as the region i change.? Thank You very much .
Has anyone else done this successfully?
yes i did from week ago
equlizer said:
Has anyone else done this successfully?
Click to expand...
Click to collapse
yes i did from week ago i got the Samsung pay but still trying to get Spotify
Hi how can I check whether my galaxy watch is a UK version?
Hi I have R810 can I change region ? i got impatient and went ahead and gave it a shot took me about four attempts to get it to connect correct gotta power off and on the watch etc but anyway i got it to work..
Some_Dudee said:
I've finally managed to download spotify... my SIM card was giving away my location despite using a VPN but now it completly looks like I'm from the US thx for the helkp throughout the way @adfree and the quick responds earlier <3
Click to expand...
Click to collapse
Some dude, did you need to change your Samsung account region to the United States as well?
Hi There: Is this procedure still possible - I`m from Germany and we over here can`t use Samsung pay - will it be possible to use S pay after changing the region ???
AND what will happen with the sim card - will it still be in Germany - silly question...
How can I know which region my watch is set on? I'm from Mexico and I can not use samsung pay, the model of my watch is SM-R800. regards
Only as hint...
1 App from Store can tranfer files from Watch... to identify active CSC...
https://forum.xda-developers.com/showpost.php?p=80072694&postcount=786
Maybe helpfull.
Best Regards