Related
You are flashing the below at YOUR OWN RISK
This is only for the Euro version, at&t version, T-mobile version or any other GSM version of the Tab. this is NOT for any CDMA version.
This is a new Tab firmware that just leaked out (P1000XXJM6)
So far the know pros are:
1) THE BROWSER IF FINALLY FIXED! it is very smooth even with flash. i am very impressed.
2) Users are reporting new widgets.
3) The drop down drawer is smoother.
4) New readers hub
5) tweaked email client
6) better camera focus?
7) ROM feels very smooth.
Update 11/29/2010
This is an updated package which should be safer to flash via Odin.
All credits are going to Richthofen who compiled this package for us.
As it seems that original package posted in this thread was not intended to be flashed via Odin.
Samsung has introduced a new FW programming method which also supports the upcoming phones. I don´t know if it is already supported by the newest Kies version.
The new format is basically the same as Odin only smarter with a few tricks and more stable.
Richthofen has prepared a new package for us that is flashable via Odin and should work much better with less problems.
Below are the download links and instructions for everything you need to flash P1000XXJM6.
1) Download the the file HERE and extract the it
2) Inside the ZIP you will find Odin 1.7 + PIT file + PDA +Modem + CSC files.
3) Open Odin, select the PIT file + PDA + Modem + CSC into their respective places.
4) Make sure repartition is CHECKED.
5) put the phone in download mode and connect it to your computer. start flashing.
6) The device will reboot. If you are getting tons of FC's on boot, reboot into recovery and do a factory reset.
Done.
** You can root using SuperOneClick method. Other methods do not work at this time.
**If you are on at&t and using the at&t model, please reflash the Bell modem to gain 850Mhz back.
clubtech said:
Please be advised that i have not yet tested this firmware so i don't know if it works and i am not responsible if it bricks your Tab!!!
The brave ones are welcome to try and report back.
It was originally labeled as P1000XXJM9 on the Samsung FUS server however it looks like it is P1000XXJM6.
Download: http://www.multiupload.com/OO6CWYBQYN
Release date: 11/25/2010
Flash: latest Odin with no repartition (as this does not look like it is a full flash). No PIT file needed as it is not a full flash.
Click to expand...
Click to collapse
Taking one for the team here, flash failed, Tab totally unresponsive.
Sorry it failed.
can u detail the below please:
- what is your tab model?
- are u still able to into download mode to flash to a working firmware ?
- are u sure you did not select repartition when flashing?
clubtech said:
Sorry it failed.
can u detail the below please:
- what is your tab model?
Bell Tab running P1000XXJK5
- are u still able to into download mode to flash to a working firmware ?
Unable to boot, access recovery or download mode, screen black, computer and Odin do not recognize cable connection.
- are u sure you did not select repartition when flashing?
Click to expand...
Click to collapse
Did not repartition.
just flashed, browser MUCH better , smooth scrolling on engadget .
You need to flash dbdata from this post:
http://forum.xda-developers.com/showpost.php?p=9305891&postcount=1
Can u detail exactly how you flashed this?
Which Odin version ?
Repartirion or not?
Which tab model do you have ?
also new widgets, new notes in browser
flashed with odin 1.7 , no repartition. After flash tab reboot in download mode again.
Flashed again but only dbdata .
cezarc1 said:
flashed with odin 1.7 , no repartition. After flash tab reboot in download mode again.
Flashed again but only dbdata .
Click to expand...
Click to collapse
Thanks.
I wonder why user above you bricked then.
Which version of the tab are u using? The euro one or something else?
euro version
Gonna try flashing this firmware
So just to confirm, it's only partial yes?
Thanks
risq said:
Gonna try flashing this firmware
So just to confirm, it's only partial yes?
Thanks
Click to expand...
Click to collapse
Correct. Let us know the resutls and exactly how you flashed and Odin version used and your tab version.
cezarc1 said:
just flashed, browser MUCH better , smooth scrolling on engadget .
You need to flash dbdata from this post:
http://forum.xda-developers.com/showpost.php?p=9305891&postcount=1
Click to expand...
Click to collapse
can you run acid3 test, is the result still 93/100? Thanks.
http://acid3.acidtests.org/
Sent from my GT-P1000 using Tapatalk
Ok,
Got the latest version installed by flashing the latest update with odin, then flashing dbdata.rfs afterwards....
only thing is, it's now causing launcherpro and other apps to force close, so I'm going to re-flash JJ4 / JK5 clean then re-apply this update.
antz88c said:
can you run acid3 test, is the result still 93/100? Thanks.
http://acid3.acidtests.org/
Sent from my GT-P1000 using Tapatalk
Click to expand...
Click to collapse
Still 93/100
im guessing its not from samfirmware?
JM is kinda weird since on samsung code JM means J = 2010 and M = 13th month which is ......
K is november and L should be the latest one >.< (december)
where did you get this one anyway?
Ok - got it back to life....re-flashing now
cezarc1 said:
Still 93/100
Click to expand...
Click to collapse
But is the browser really smoother ? Even after you restored all your apps?
clubtech said:
It was originally labeled as P1000XXJM9 on the Samsung FUS server however it looks like it is P1000XXJM6.
Click to expand...
Click to collapse
Check this post for more info about recent releases:
http://forum.xda-developers.com/showpost.php?p=9422970&postcount=4
"JM" is weird...the dates don't make sense.
risq said:
Ok - got it back to life....re-flashing now
Click to expand...
Click to collapse
How did you get it back to life?
Sent from my SGH-T849 using XDA App
Hi,
I accidentally flashed the Nexus7 firmware (http://forum.xda-developers.com/showthread.php?t=2449072) on my S4 mini running latest CM10.1 nightly.
I wanted to ask, can i somehow revert that? it doesnt seem to affect anything at the moment..
these files were copied:
package_extract_file("bootloader-flag.txt", "/dev/block/platform/msm_sdcc.1/by-name/misc");
package_extract_file("bootloader.sbl2.img", "/dev/block/platform/msm_sdcc.1/by-name/sbl2");
package_extract_file("bootloader.sbl3.img", "/dev/block/platform/msm_sdcc.1/by-name/sbl3");
package_extract_file("bootloader.tz.img", "/dev/block/platform/msm_sdcc.1/by-name/tz");
package_extract_file("bootloader.rpm.img", "/dev/block/platform/msm_sdcc.1/by-name/rpm");
package_extract_file("bootloader.aboot.img", "/dev/block/platform/msm_sdcc.1/by-name/aboot");
package_extract_file("bootloader-flag-clear.txt", "/dev/block/platform/msm_sdcc.1/by-name/misc");
package_extract_file("bootloader.sbl2.img", "/dev/block/platform/msm_sdcc.1/by-name/sbl2b");
package_extract_file("bootloader.sbl3.img", "/dev/block/platform/msm_sdcc.1/by-name/sbl3b");
package_extract_file("bootloader.tz.img", "/dev/block/platform/msm_sdcc.1/by-name/tzb");
package_extract_file("bootloader.rpm.img", "/dev/block/platform/msm_sdcc.1/by-name/rpmb");
package_extract_file("bootloader.aboot.img", "/dev/block/platform/msm_sdcc.1/by-name/abootb");
package_extract_file("DDR.bin", "/dev/block/platform/msm_sdcc.1/by-name/DDR");
can i just delete these files or are they used by the system? how would I be able to tell if they are used?
Thanks!
That doesn't look good. Some very important partitions might have been written to. Can you still boot it into recovery or the rom?
if the phone boot in recovery mode, the phone can be repaired;
can boot ?
I'm using the phone as usual
Hi,
Thanks for the reply.
The phone booted regularly and I am using it at the moment as if nothing happened.
So i guess I shouldn't reboot? ^^
How can I fix this? Reflash CM?
In the update script of CM I can't see these files being touched. The boot.IMG actually doesn't contain any files in /dev. Is that normal?
Thanks
Yeah those files are being written directly to partitions, which is very dangerous if they're from another device. The one you flashed in particular replaces the bootloader partitions, which might completely brick the phone and make it unbootable. I guess that if you was able to boot it after flashing it, that it didn't actually flash the partitions after all. So if everything seems ok, you should consider yourself lucky.
hy,
if the phone boot in recovery mode, then you can make a full restore factory firmware with this file:
Bootloader -> BOOTLOADER_I9195XXUAMG8_1097013_REV01_user_low_ship_MULTI_CERT.tar
PDA -> CODE_I9195XXUAMG8_1097013_REV01_user_low_ship_MULTI_CERT.tar
PHONE -> MODEM_I9195XXUAMG8_1097013_REV01_user_low_ship_MULTI_CERT.tar
CSC -> CSC_OXA_I9195OXAAMG8_1097013_REV01_user_low_ship_MULTI_CERT.tar
PIT -> CSB_signed_SERRANOLTE_ONEPIT_OPEN_130523.pit
the factory firmware are I9195XXUAMG8_1097013_DBT, link:
https://mega.co.nz/#!FtEjAKSY!QKwkYilDkcB43Yu1tYsBqTGsD5U-f3n3P5Uaho7bJY8
thanks
and would you recommend flashing that? would anything else be affected? (CM 10.1)
or am i "safe" ...
Thanks guys!
yes,
before flash CM 10 flash this files;
this is like installing a fresh windows os, and this will repaire your phone: inclusiv bootloaders, partitions etc
ok, and i do that by booting into download mode and flashing with odin, right?
yes ... and then you flash your firmware for your region
ok.. one last thing..
when you say firmware, what do you refer to? just the bootloader/modem? or the complete "factory image"?
does it matter if i flash a different firmware?
thanks
1. flash the files from the post #6
Bootloader -> BOOTLOADER_I9195XXUAMG8_1097013_REV01_user_low_shi p_MULTI_CERT.tar
PDA -> CODE_I9195XXUAMG8_1097013_REV01_user_low_ship_MULT I_CERT.tar
PHONE -> MODEM_I9195XXUAMG8_1097013_REV01_user_low_ship_MUL TI_CERT.tar
CSC -> CSC_OXA_I9195OXAAMG8_1097013_REV01_user_low_ship_M ULTI_CERT.tar
PIT -> CSB_signed_SERRANOLTE_ONEPIT_OPEN_130523.pit
2. then you flash firmware for your region, you can take the firmware from http://samsung-updates.com/device/?id=GT-I9195 ,
in my case my region is COA, then i chose firmware with COA; in your case probably is another region, your need to find your region on the box of the phone (is something like GT-i9195ZKACOA)
3. then if you want flash again CM 10.1
please feedback if work
solution:
Hi,
so thanks bog and arcos. what i did in the end:
boot into download mode, plugin to odin
select bootloader from the factory firmware that bog posted (thanks for that!)
select phone baseband from samsung-updates latest build (because there was a newer version.. AMH4 is what i have as baseband now)
all the files that were flashed by the update.zip from the OP have been replaced basically.
i didnt bother reflashing a full rom, and it works flawlessly now.
i guess i got lucky and thanks again!
Is it possible to renew the link because the files I need urgent
Is it possible to renew the link because the files I need urgent
chokolad said:
Is it possible to renew the link because the files I need urgent
Click to expand...
Click to collapse
look here http://forum.xda-developers.com/showthread.php?t=2751224
Aronuser said:
look here http://forum.xda-developers.com/showthread.php?t=2751224
Click to expand...
Click to collapse
Sorry, but I did not see those files. Can you help me find:
Bootloader -> BOOTLOADER_I9195XXUAMG8_1097013_REV01_user_low_shi p_MULTI_CERT.tar
PDA -> CODE_I9195XXUAMG8_1097013_REV01_user_low_ship_MULT I_CERT.tar
PHONE -> MODEM_I9195XXUAMG8_1097013_REV01_user_low_ship_MUL TI_CERT.tar
CSC -> CSC_OXA_I9195OXAAMG8_1097013_REV01_user_low_ship_M ULTI_CERT.tar
chokolad said:
Sorry, but I did not see those files. Can you help me find:
Bootloader -> BOOTLOADER_I9195XXUAMG8_1097013_REV01_user_low_shi p_MULTI_CERT.tar
PDA -> CODE_I9195XXUAMG8_1097013_REV01_user_low_ship_MULT I_CERT.tar
PHONE -> MODEM_I9195XXUAMG8_1097013_REV01_user_low_ship_MUL TI_CERT.tar
CSC -> CSC_OXA_I9195OXAAMG8_1097013_REV01_user_low_ship_M ULTI_CERT.tar
Click to expand...
Click to collapse
You need to extract the zip file
Aronuser said:
You need to extract the zip file
Click to expand...
Click to collapse
File contains only one file with the extension .md5. I need all the files without .pit file - Bootloader >
PDA > CODE...
PHONE > MODEM...
CSC > CSC...
chokolad said:
File contains only one file with the extension .md5. I need all the files without .pit file - Bootloader >
PDA > CODE...
PHONE > MODEM...
CSC > CSC...
Click to expand...
Click to collapse
i noticed that, well the repair firmwares in my thread most likely contain all files, but they are for premium users only. thats why i don't have them damn!
if you by any chance download them, please send them to me for that i can provide a free mirror in the thread! thank you in advance
Aronuser said:
i noticed that, well the repair firmwares in my thread most likely contain all files, but they are for premium users only. thats why i don't have them damn!
if you by any chance download them, please send them to me for that i can provide a free mirror in the thread! thank you in advance
Click to expand...
Click to collapse
Thank you. That's exactly what I did not.
Mirror Link to N910TUVU2DOK2_N910TTMB2DOK2_TMB [FULL STOCK ROM]
Also: BOOTLOADER & MODEM
---Downloads---
Full Untouched ROM from Sammobile
Mega: https://mega.nz/#!asRzgCYb!f8ssb_v6zDxYJ8_u1ygzpothj1arjRmMdM_opGz8QO0
Bootloader file:
Android File Host: https://www.androidfilehost.com/?fid=24269982087008410
Mega: https://mega.nz/#!atYXVJQI!KSMHRMcH4qPgoP7sxSWM0ihNMOU-eQwYISaimam5tdk
Modem file:
Android File Host: https://www.androidfilehost.com/?fid=24269982087008409
Mega: https://mega.nz/#!vlQ2VILY!NFCASlvP7Rf5kB3d2eN2sy3MC_3SLmQ945dRKB1nfzU
User: @eduardog131 provided links just to the modem and bootloader in a later post in this thread. I am simply providing the link in the OP Thanks!
OK so do we use odin
Thanks. Will we be able to root and custom recovery?
lilila said:
Thanks. Will we be able to root and custom recovery?
Click to expand...
Click to collapse
You should be able to ODIN flash TWRP then you will need to flash a custom kernel to get root, and flash Superuser.
I have not tried it yet though, so I have not verified if it works or not.
I tried flash clean rom via odin, fully bootup, reboot to download, installed TWRP recovery, then flashed superuser.zip. Bootloop.
There was this other article on the net about the 910C saying they got 5.1.1 but you have to flash back your booloader to 5.0.1.
Odin new firmware, Odin twrp, in twrp flash freeza's beastmode 1.1 for n910T/3, flash supersu. report.
poontab said:
Odin new firmware, Odin twrp, in twrp flash freeza's beastmode 1.1 for n910T/3, flash supersu. report.
Click to expand...
Click to collapse
Did it work?
poontab said:
Odin new firmware, Odin twrp, in twrp flash freeza's beastmode 1.1 for n910T/3, flash supersu. report.
Click to expand...
Click to collapse
Do you have a link for beastmode?
Rollablunt420 said:
Did it work?
Click to expand...
Click to collapse
Dunno. Left laptop at work but should since it's not enforcing. I'll know in a few hours.
sdaelr said:
Do you have a link for beastmode?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=3238775
Alternatively AEL or other non enforcing 5.1.1 compatible kernel are needed for Samsung lollipop 5.1 or greater with root.
poontab said:
Odin new firmware, Odin twrp, in twrp flash freeza's beastmode 1.1 for n910T/3, flash supersu. report.
Click to expand...
Click to collapse
Yes, it works for me.
来自我的 SM-N910T 上的 Tapatalk
Ripped the BL/CP parts straight from the firmware.
Since I assume none of you want to exactly download a 1.84GB file for just a bootloader and modem upgrade (why would you go back to stock), here are the BL/CP parts!
-
[Update: 13-1-16: PIT file now available to recover from a bad brick]
[DO NOT USE UNLESS YOU NEED TO REPARTITION YOUR PARTITION TABLE, OR YOU'RE IN A BAD BRICK.]
https://www.androidfilehost.com/?fid=24369303960684492
INSTALLING THESE FILES
1. Load phone in download mode. (Vol down+Home+Power)
2. Open ODIN3 on your computer. (Make sure the Samsung drivers are installed.)
3. Load the booloader file in BL.
3a. Load the modem file in CP.
4. Hit the start button, and let the files flash.
5. If there are no error messages in the log portion of ODIN3, then you have successfully flashed and upgraded to the 5.1.1 bootloader.
NOTE: At this time, you CANNOT downgrade from the 5.1.1 bootloader, so take caution.
---Downloads:
Bootloader file:https://www.androidfilehost.com/?fid=24269982087008410
Modem file:https://www.androidfilehost.com/?fid=24269982087008409
eduardog131 said:
Ripped the BL/CP parts straight from the firmware.
Since I assume none of you want to exactly download a 1.84GB file for just a bootloader and modem upgrade (why would you go back to stock), here are the BL/CP parts!
-
INSTALLING THESE FILES
1. Load phone in download mode. (Vol down+Home+Power)
2. Open ODIN3 on your computer. (Make sure the Samsung drivers are installed.)
3. Load the booloader file in BL.
3a. Load the modem file in CP.
4. Hit the start button, and let the files flash.
5. If there are no error messages in the log portion of ODIN3, then you have successfully flashed and upgraded to the 5.1.1 bootloader.
NOTE: At this time, it is unknown if you can downgrade from the 5.1.1 bootloader, so take caution.
---Downloads:
Bootloader file:https://www.androidfilehost.com/?fid=24269982087008410
Modem file:https://www.androidfilehost.com/?fid=24269982087008409
Click to expand...
Click to collapse
Pretty cool... Can you please do the same for the T3 version?
domhall said:
Pretty cool... Can you please do the same for the T3 version?
Click to expand...
Click to collapse
Sure, when I get time at home. (That is, unless someone beats me.)
~~
Razgriz said:
DOK2 is for both versions of the TMo Note 4.
Click to expand...
Click to collapse
T3 isn't interchangeable with T firmware.
I'm gonna go on the limb here, I'm 50% certain you can't go back to COG2... Be very cautious... When I Odin'ed DOK2 the process seemed odd not sure why lol
Will say modem on DOK2 seems way more stable, I don't seem to have as many data drops, and me personally I could give two s**ts if I can go back to cog2..doesnt matter as you can still flash those roms, I'm on a DOK2 Bootloader and modem with a cog2 rom right now...by the way thanks for the bootloader and modem files man..lol..really didnt wanna go back to stock
Sent from my SM-N920T using xda app-developers app
manufan721 said:
Will say modem on DOK2 seems way more stable, I don't seem to have as many data drops, and me personally I could give two s**ts if I can go back to cog2..doesnt matter as you can still flash those roms, I'm on a DOK2 Bootloader and modem with a cog2 rom right now...by the way thanks for the bootloader and modem files man..lol..really didnt wanna go back to stock
Click to expand...
Click to collapse
Yeah, pretty much agree here. This new modem has given me a lot less data drops. I had really spotty HSPA, with it dropping so constantly. Tested it out during school today and it hasn't dropped.
-------
N910T3 BL+CP parts ripped! I also managed to acquire a PIT file for the T3...DO NOT LOAD THE PIT FILE INTO ODIN3! I HAVE IT IN CASE SOMEONE WHO HAS A SEVERE BRICK CAN USE IT!
Same instructions as before for flashing the BL+CP parts. Reference a few posts up.
Bootloader file:https://www.androidfilehost.com/?fid=24269982087009029
Modem file:https://www.androidfilehost.com/?fid=24269982087009028
PIT FILE (YOU HAVE BEEN WARNED! DO NOT LOAD UNLESS THERE IS A SEVERE BRICK.)https://www.androidfilehost.com/?fid=24269982087009027
Confirm once you load DKO2 BL you can't go back to COG2 BL
ALLDAT said:
Confirm once you load DKO2 BL you can't go back to COG2 BL
Click to expand...
Click to collapse
Lawdy.. lol how many threads have you asked this in. I answered this in another thread.
Some people just post info and never post links . I had firmware for sometime already but i was waiting for other guy to post it. I know we all looking for full Odin files so here they are :
AP_N920AUCU4EQC6_CL10809541_QB12921033_REV00_user_lo w_ship_meta.tar
CSC_ATT_N920AATT4EQC6_CL10809541_QB12921033_REV00_use r_low_ship.tar
CP_N920AUCU4EQC6_CP6021124_CL10809541_QB12921033_REV 00_user_low_ship.tar
BL_N920AUCU4EQC6_CL10809541_QB12921033_REV00_user_lo w_ship.tar
Download Link of :
Nougat_N920AUCU4EQC6_Odin_Files
All this files are in one zip. Unzip and put this in appropriate windows in ODIN.
Here are Odin 3.12.3
Good Luck.
Of course, this will wipe my device again, even though I do not select the CSC?
If you allow it to flash a new system and user data image then yes.
You basically need a wipe anyways going from MM to Nougat.
Sent from my Galaxy Note5 using XDA Labs
I'm already on Nougat N920AUCU4EQC5. I'm just trying to avoid having to wipe my phone
When i use this. It passes Odin then when the phone tries to reboot and install the update it says deleting then im back to 6.0.1. Any idea why?
norbarb said:
Some people just post info and never post links . I had firmware for sometime already but i was waiting for other guy to post it. I know we all looking for full Odin files so here they are :
AP_N920AUCU4EQC6_CL10809541_QB12921033_REV00_user_lo w_ship_meta.tar
CSC_ATT_N920AATT4EQC6_CL10809541_QB12921033_REV00_use r_low_ship.tar
CP_N920AUCU4EQC6_CP6021124_CL10809541_QB12921033_REV 00_user_low_ship.tar
BL_N920AUCU4EQC6_CL10809541_QB12921033_REV00_user_lo w_ship.tar
Download Link of :
Nougat_N920AUCU4EQC6_Odin_Files
All this files are in one zip. Unzip and put this in appropriate windows in ODIN.
Good Luck.
Click to expand...
Click to collapse
thank you very much for the link, bro.. i'm already Nougated now. experiencing some blue screen, but when i'm using newest odin.. all fixed.. thx again, man, you are the best.
DuganNash said:
When i use this. It passes Odin then when the phone tries to reboot and install the update it says deleting then im back to 6.0.1. Any idea why?
Click to expand...
Click to collapse
You may use wrong odin, some security installed on your phone, What build are you on?
norbarb said:
You may use wrong odin, some security installed on your phone, What build are you on?
Click to expand...
Click to collapse
It is Odin 3.12 run as admin. it gives me the green pass, then bootloader rolls back to MM
I am on build QB2 as of now.
DuganNash said:
It is Odin 3.12 run as admin. it gives me the green pass, then bootloader rolls back to MM
I am on build QB2 as of now.
Click to expand...
Click to collapse
Can you post your about phone screen ?
norbarb said:
Can you post your about phone screen ?
Click to expand...
Click to collapse
here you go, thank you
DuganNash said:
here you go, thank you
Click to expand...
Click to collapse
Thanks. Ok. Do you have any security like any kind encryption installed on your phone ?
I update first post with newest ODIN. Are you unzipping file you download and put tar files in correct windows? Are you in Download mode when using ODIN ?
norbarb said:
Thanks. Ok. Do you have any security like any kind encryption installed on your phone ?
I update first post with newest ODIN. Are you unzipping file you download and put tar files in correct windows? Are you in Download mode when using ODIN ?
Click to expand...
Click to collapse
I'm not sure about security . It was a stock at note 5 until I tried updated to qb2. All dev factors are turned on, and the rar files are all unzipped and loaded through odin in download mode. It passes then the android update screen (the little robot ) says erasing upon revoot and I boot into mm again
DuganNash said:
I'm not sure about security . It was a stock at note 5 until I tried updated to qb2. All dev factors are turned on, and the rar files are all unzipped and loaded through odin in download mode. It passes then the android update screen (the little robot ) says erasing upon revoot and I boot into mm again
Click to expand...
Click to collapse
OK. Try this , After you unzip from one zip to 4 files , unzip all 4 files to tar.md5 and try ODIN again. Check for any encryption installed on your phone preventing bootloader from overwriting files.
norbarb said:
OK. Try this , After you unzip from one zip to 4 files , unzip all 4 files to tar.md5 and try ODIN again. Check for any encryption installed on your phone preventing bootloader from overwriting files.
Click to expand...
Click to collapse
i tried this after making sure the phone was not encrypted under the security setting. Same result unfortunately. am looking for alternatives
You're the man !! just the files Odin I was looking for. I want to marry with you ... make me a son jajaja
DuganNash said:
i tried this after making sure the phone was not encrypted under the security setting. Same result unfortunately. am looking for alternatives
Click to expand...
Click to collapse
You have to necessarily erase the security lock fingerprints, you also have to remove the password lock, you have not any type of security lock, then you have to enable developer options and type USB debugging(This last one I do not know if it is strictly necessary, but just in case)If you have some security lock on your phone, even if you pray, you will not be able to!
After update installation it is sayin(device didn't have DRK,please install DRK first)
Please help me
Thanks
TaimooR Khawaja said:
After update installation it is sayin(device didn't have DRK,please install DRK first)
Please help me
Thanks
Click to expand...
Click to collapse
What did you flash before this stock firmware?
DRK=device root key
Clicking from Edge of Galaxy
Just a thought, can you Odin flash any other version of the official AT&T firmware? Maybe try another version to see if the phone is truly screwed.
Also, have you tried a factory reset on the phone first. Maybe something (anything) loaded on the phone is preventing the Odin flash. I know this shouldn't matter but it's worth a try.
mattern1974 said:
Just a thought, can you Odin flash any other version of the official AT&T firmware? Maybe try another version to see if the phone is truly screwed.
Also, have you tried a factory reset on the phone first. Maybe something (anything) loaded on the phone is preventing the Odin flash. I know this shouldn't matter but it's worth a try.
Click to expand...
Click to collapse
Same here.. i try to flash it via odin v3.12 it showing pass message..
After reboot my phone still on MM 6.0.1
Many users report imei errors months after rooting. I don't recommend rooting. we do not know the origin of the problem
Hi friends.
On Topjohnwu's github, there´s a note about root any Samsung without recovery
Basically, extract the AP from stock firmware, copy it to phone, install magisk from xda forum, patch it, download the patched file to your pc and flash it using Odin.
You must fresh flash the entire ROM and the patched AP, userdata MUST be formatted (use CSC, not HOME_CSC)
Use it at your own risk, Knox wil be tripped and you could brick your phone.
Search the note into Topjohnwu´s github, Magisk section, Install and search for specific samsung section.
Be careful and enjoy rooting!
edukardo said:
Hi friends.
On Topjohnwu's github, there´s a note about root any Samsung without recovery
Basically, extract the AP from stock firmware, copy it to phone, install magisk from xda forum, patch it, download the patched file to your pc and flash it using Odin.
You must fresh flash the entire ROM and the patched AP, userdata MUST be formatted (use CSC, not HOME_CSC)
Use it at your own risk, Knox wil be tripped and you could brick your phone.
Search the note into Topjohnwu´s github, Magisk section, Install and search for specific samsung section.
Be careful and enjoy rooting!
Click to expand...
Click to collapse
Well, currently i am not gonna root this devices. Still feel comfort with full stock ROM, maybe after custom ROM arrive for this devices it will changes my mind to root the devices.
gusbalaa said:
Well, currently i am not gonna root this devices. Still feel comfort with full stock ROM, maybe after custom ROM arrive for this devices it will changes my mind to root the devices.
Click to expand...
Click to collapse
Is OK, just a bit of work debloating...
edukardo said:
Hi friends.
On Topjohnwu's github, there´s a note about root any Samsung without recovery
Basically, extract the AP from stock firmware, copy it to phone, install magisk from xda forum, patch it, download the patched file to your pc and flash it using Odin.
You must fresh flash the entire ROM and the patched AP, userdata MUST be formatted (use CSC, not HOME_CSC)
Use it at your own risk, Knox wil be tripped and you could brick your phone.
Search the note into Topjohnwu´s github, Magisk section, Install and search for specific samsung section.
Be careful and enjoy rooting!
Click to expand...
Click to collapse
Here's my story, I patched the AP file and flashed it using odin, didn't add any other stock firmware files. I was able to attain root privileges, then the unthinkable happened. I received a call and it got disconnected instantly. The network signals vanished, I restarted the phone and was welcomed with a flash notification message "IMEI null or invalid."
I've since flashed it 10-12 times.
IMEI hasn't been restored, wifi works though.
I've given up hope now, my daughter attends her school classes on it.
I have never heard of such a case. Where did you get the boot.img from? It must be the same version as your phone. I recommend you flash a clean software by Odin, without root, and verify that everything is normal
edukardo said:
I have never heard of such a case. Where did you get the boot.img from? It must be the same version as your phone. I recommend you flash a clean software by Odin, without root, and verify that everything is normal
Click to expand...
Click to collapse
Downloaded and extracted the AP file from the original firmware. It has happened with another guy, he did post a video on youtube, fixed it using some Z3X box.
The firmware was the original, but was it the same version as the one you had installed?
edukardo said:
The firmware was the original, but was it the same version as the one you had installed?
Click to expand...
Click to collapse
Yes, downloaded it using frija.. I did just flashed the patched AP file, skipped the rest, maybe that was the reason..
Did you get the IMEI back?
edukardo said:
Did you get the IMEI back?
Click to expand...
Click to collapse
Nope, I've given up. Can't invest any more money on the Z3X box..
Why don't you flash the whole system from Odin? No modifications. That should work
edukardo said:
Why don't you flash the whole system from Odin? No modifications. That should work
Click to expand...
Click to collapse
I've already done that 10-12 times to no avail.
You must download the exact version of rom for your country/carrier. Search for it in sammobile.
Can't understand what the problem is.
I´ve got no problem at all
edukardo said:
I´ve got no problem at all
Click to expand...
Click to collapse
Were you able to root it?
Also, in addition to the patched AP file do we need to flash the BL, CP and CSC files?
Yep no issues. Magisk hide, all working.
When you extracted the boot img, there where another files into the AP file provided by samsung that must be flashed too.
Do you have the patched file? Try flashing BL, CP, CSC and AP and then flash again only the patched boot.img into AP.
But I think it has nothing to the root with loose of imei.
Was your phone a company one? Like verizon, etc?
edukardo said:
Yep no issues. Magisk hide, all working.
When you extracted the boot img, there where another files into the AP file provided by samsung that must be flashed too.
Do you have the patched file? Try flashing BL, CP, CSC and AP and then flash again only the patched boot.img into AP.
But I think it has nothing to the root with loose of imei.
Was your phone a company one? Like verizon, etc?
Click to expand...
Click to collapse
No, it's unlocked. Did you patch the whole AP file or just the boot file through magisk? I patched the entire AP file. If you could please list all the steps, it would be a huge help. Thanks.
edukardo said:
Yep no issues. Magisk hide, all working.
When you extracted the boot img, there where another files into the AP file provided by samsung that must be flashed too.
Do you have the patched file? Try flashing BL, CP, CSC and AP and then flash again only the patched boot.img into AP.
But I think it has nothing to the root with loose of imei.
Was your phone a company one? Like verizon, etc?
Click to expand...
Click to collapse
I saw a video of rooting the f62, here's the link. Please take a look and let me know if the steps are the same.
Ouch, working time...
Tutorial - Root - Samsung Galaxy A32 (SM-A325MDS)
--- It is necessary to see the entire video --- ============================ (Download Mediafire) you already have all the files, so the video tutorial starts at 14:23 1- unlock bootloader 2 - use (Odin) and install (magisk_patched-23000_6V0ws)...
forum.xda-developers.com