Related
I keep changing roms since long time before on my oneplus devices, i bought asus zenfone 2 and tried to root the phone, it got bricked and i unbricked successfully by using xFSTK tool. device turned on like before but unable to connect to pc, even when MTP is selected it just starts charging when i connect it to pc, even tried with different types of cables still the same issue. tried in recovery and fastboot as well.
at least if it would work in fastboot then i can install twrp and add custom rom. not even able to do that.
P.S - tried even installing adb, intel drivers. problem doesn't seem to be going..
PLEASE HELP.
deejaysandee143 said:
I keep changing roms since long time before on my oneplus devices, i bought asus zenfone 2 and tried to root the phone, it got bricked and i unbricked successfully by using xFSTK tool. device turned on like before but unable to connect to pc, even when MTP is selected it just starts charging when i connect it to pc, even tried with different types of cables still the same issue. tried in recovery and fastboot as well.
at least if it would work in fastboot then i can install twrp and add custom rom. not even able to do that.
P.S - tried even installing adb, intel drivers. problem doesn't seem to be going..
PLEASE HELP.
Click to expand...
Click to collapse
flash latest Raw firmware with asus flash tool. get it from following thread.
http://forum.xda-developers.com/zenfone2/help/thead-bricked-phone-updating-to-mm-tips-t3452785
sukhwant717 said:
flash latest Raw firmware with asus flash tool. get it from following thread.
http://forum.xda-developers.com/zenfone2/help/thead-bricked-phone-updating-to-mm-tips-t3452785
Click to expand...
Click to collapse
Brother, after completing this process only i am facing this issue..
unable to connect my phone in any mode. not even to other pc.
Fast charging works?
There may be a problem with the flex cable that has the sim + sd slots on it. Costs 3$ on ebay and its very easy to replace.
pecholino said:
Fast charging works?
There may be a problem with the flex cable that has the sim + sd slots on it. Costs 3$ on ebay and its very easy to replace.
Click to expand...
Click to collapse
No, fast charging was not working after the process in xFSTK tool. it would take around 8 hours to get 100 %
deejaysandee143 said:
Brother, after completing this process only i am facing this issue..
unable to connect my phone in any mode. not even to other pc.
Click to expand...
Click to collapse
i said flash raw firmware again.. you will overcome the issue! which version you are currently on?
sukhwant717 said:
i said flash raw firmware again.. you will overcome the issue! which version you are currently on?
Click to expand...
Click to collapse
The phone doesn't boots normally, and neither connects in fastboot nor in recovery. only shows error. its version 5
deejaysandee143 said:
The phone doesn't boots normally, and neither connects in fastboot nor in recovery. only shows error. its version 5
Click to expand...
Click to collapse
then you have to use xfstk again..you can not do anything until you are able to go into fastboot mode. flash xfstk again and again until you enter fastboot mode
sukhwant717 said:
then you have to use xfstk again..you can not do anything until you are able to go into fastboot mode. flash xfstk again and again until you enter fastboot mode
Click to expand...
Click to collapse
I can enter only in fastboot mode but fastboot wont be detected in adb, as i mentioned it's not getting recognized..
Well I am having the same simptoms since the sdcard slot got burned. No fast charging and no pc recognition. I am currently waiting for the flex cable so I can fix it
My pc is not detecting Mobil in fastboot mode. I want to unlock bootloader and root it, is there any way to fix it? I'm using win 10
bisht ankur said:
My pc is not detecting Mobil in fastboot mode. I want to unlock bootloader and root it, is there any way to fix it? I'm using win 10
Click to expand...
Click to collapse
You need to download the correct drivers for Z2 Plus, search on google
visheshjain25 said:
You need to download the correct drivers for Z2 Plus, search on google
Click to expand...
Click to collapse
I tried universal adb drivers and Lenovo z2 adb drive but they didn't work.
bisht ankur said:
I tried universal adb drivers and Lenovo z2 adb drive but they didn't work.
Click to expand...
Click to collapse
Your drivers are not correct, that's why the pc is not detecting the phone, try downloading MI Flash Tool, it has all the necessary drivers for Z2 Plus, google it
visheshjain25 said:
Your drivers are not correct, that's why the pc is not detecting the phone, try downloading MI Flash Tool, it has all the necessary drivers for Z2 Plus, google it
Click to expand...
Click to collapse
Thanks for replying, I tried mi flash but it also didn't work.
this worked for me
bisht ankur said:
My pc is not detecting Mobil in fastboot mode. I want to unlock bootloader and root it, is there any way to fix it? I'm using win 10
Click to expand...
Click to collapse
Connect your smartphone to PC
Make sure the USB debugging is enabled and revoke all debugging history(the option below the enable debugging)
Now install the drivers that appear on the screen as ZUK z2 drivers or something like that.
Install it .
It should take some time.
Then try the following command line"adb devices"
Now a prompt should appear
Click always allow and then on allow.
Now you should be able to connect your phone to the PC.
I just unlocked my bootloader on a win 10 machine
Like this if this works for you.
emotionless161098 said:
Connect your smartphone to PC
Make sure the USB debugging is enabled and revoke all debugging history(the option below the enable debugging)
Now install the drivers that appear on the screen as ZUK z2 drivers or something like that.
Install it .
It should take some time.
Then try the following command line"adb devices"
Now a prompt should appear
Click always allow and then on allow.
Now you should be able to connect your phone to the PC.
I just unlocked my bootloader on a win 10 machine
Like this if this works for you.
Click to expand...
Click to collapse
wow, thanks mate it worked.:good::good:
bisht ankur said:
wow, thanks mate it worked.:good::good:
Click to expand...
Click to collapse
Glad I helped
bisht ankur said:
My pc is not detecting Mobil in fastboot mode. I want to unlock bootloader and root it, is there any way to fix it? I'm using win 10
Click to expand...
Click to collapse
Same here but I used adb wireless app and it worked
IAM also facing this problem 1)first of all you must install zuk drivers only next adb fastboot drivers install your PC and let's go
bisht ankur said:
My pc is not detecting Mobil in fastboot mode. I want to unlock bootloader and root it, is there any way to fix it? I'm using win 10
Click to expand...
Click to collapse
same issuue
I'm trying to connect my Note 8T to my windows 7 to use software such as mpcsuite, tool-all-in-one and others.
I'm struggling to do it, Windows won't recognise it. I've tried all the drivers I've found in this forum and also googling, but no luck. When I connect the phone it does configure some device automatically, but there's always one missing that I cannot find drivers for: TRINKET-IDP _SN:XXXXX
The thing is that if I go into fast boot, then Windows will find the phone just fine and I can for example run the MiFlash Unlock app, but not when the phone is in any other state.
I haven't tried other versions of Windows as I have no other.
any suggestion what I'm missing here?
thanks!
johnsecada said:
I'm trying to connect my Note 8T to my windows 7 to use software such as mpcsuite, tool-all-in-one and others.
I'm struggling to do it, Windows won't recognise it. I've tried all the drivers I've found in this forum and also googling, but no luck. When I connect the phone it does configure some device automatically, but there's always one missing that I cannot find drivers for: TRINKET-IDP _SN:XXXXX
The thing is that if I go into fast boot, then Windows will find the phone just fine and I can for example run the MiFlash Unlock app, but not when the phone is in any other state.
I haven't tried other versions of Windows as I have no other.
any suggestion what I'm missing here?
thanks!
Click to expand...
Click to collapse
download minimal ADB and Fastboot and turn on usb debugging from developer options. Also accept the popup on screen when you connect phone to PC after this
I have the same problem, have you succeeded ?
Thank you
I have the same issue with my Note 8T
i had the same problem with my note8. try to google around 1 hour. & that's the ones topic about it. unfortunately it has no answer poor me
johnsecada said:
I'm trying to connect my Note 8T to my windows 7 to use software such as mpcsuite, tool-all-in-one and others.
I'm struggling to do it, Windows won't recognise it. I've tried all the drivers I've found in this forum and also googling, but no luck. When I connect the phone it does configure some device automatically, but there's always one missing that I cannot find drivers for: TRINKET-IDP _SN:XXXXX
The thing is that if I go into fast boot, then Windows will find the phone just fine and I can for example run the MiFlash Unlock app, but not when the phone is in any other state.
I haven't tried other versions of Windows as I have no other.
any suggestion what I'm missing here?
thanks!
Click to expand...
Click to collapse
Try downloading the Xiaomi unlocking tool, I didn't have problems with drivers, but I saw a messages about downloading drivers and "Driver already installed" for my phone within the application log.
Give that a try!
But problem with Note 8. I don't remember when it started, but on crDroid 6 it definitely worked.
After that I notice in device manager what it determinate as some SAMSUNG Adb Device with Clock World driver. I had ADB Universal Driver installed, after uninstalled everything start work fine.
I have a similar problem with note 8t too. I have Windows 10 x64 and when i put the phone on fastboot mode and plug on the pc nothing happens, nothing shows on the device manager. When the phone is in normal mode the pc recognizes it normally. I want to unlock the bootloader to change the rom to the global version, but neither Mi unlock tool or Mi flash tool recognizes it. Any tips from anybody?
scarlos89 said:
I have a similar problem with note 8t too. I have Windows 10 x64 and when i put the phone on fastboot mode and plug on the pc nothing happens, nothing shows on the device manager. When the phone is in normal mode the pc recognizes it normally. I want to unlock the bootloader to change the rom to the global version, but neither Mi unlock tool or Mi flash tool recognizes it. Any tips from anybody?
Click to expand...
Click to collapse
Use W7
W10 always have problems with some driver signature
loopypalm said:
Use W7
W10 always have problems with some driver signature
Click to expand...
Click to collapse
Thank you very much. I've installed W7 and the pc recognized the cel on fastboot mode. Mi unlock recognize it too, but now i have a message to wait 149 hours to unlock the bootloader. Just have to wait now or have some way to skip this?
Again, thank you very much.
scarlos89 said:
Thank you very much. I've installed W7 and the pc recognized the cel on fastboot mode. Mi unlock recognize it too, but now i have a message to wait 149 hours to unlock the bootloader. Just have to wait now or have some way to skip this?
Again, thank you very much.
Click to expand...
Click to collapse
you have to wait
i flash pixel experience plus and latest firmware and now my phone stuck in fastboot mode and wont detect on my pc.. i cant see it on device manager either.. whenever i try to restart it goes to stucked twrp logo.. can someone help me here?
aidenskcyu said:
i flash pixel experience plus and latest firmware and now my phone stuck in fastboot mode and wont detect on my pc.. i cant see it on device manager either.. whenever i try to restart it goes to stucked twrp logo.. can someone help me here?
Click to expand...
Click to collapse
You just have to update drivers from device manager.
Follow this, you can use the fastboot drivers either from Xiaomi or Google (if you already have them installed)
If you don't have the Android with exclamation mark, you can do it the same as shows the latest image.
SubwayChamp said:
You just have to update drivers from device manager.
Follow this, you can use the fastboot drivers either from Xiaomi or Google (if you already have them installed)
If you don't have the Android with exclamation mark, you can do it the same as shows the latest image.
Click to expand...
Click to collapse
Before i got stuck in fastboot my phone doesn't really detected in my pc even on other computers with fastboot drivers. USB File Transfer not working too, it's only charging. I'm using Havoc OS 4.8 rom and this firmware.
aidenskcyu said:
Before i got stuck in fastboot my phone doesn't really detected in my pc even on other computers with fastboot drivers. USB File Transfer not working too, it's only charging. I'm using Havoc OS 4.8 rom and this firmware.
Click to expand...
Click to collapse
And did you try what I posted? Probably you need to check which drivers you have actually installed, some of them are sometimes redundant and not necessary, what you need is the Google ADB/fastboot that it is in the Google site, and regards Xiaomi all is in the Mi flash tool and Mi Unlock tool, see to the option to install the drivers hoping that you don't need the Qualcomm 9008-USB drivers.
Of course, this is assuming that you have a data cable not only a charger cable and the issue is not with the ROM itself.
Use known good data cable!!!
Does the phone see the connection?
Is it configured properly?!!!
Try another port.
Reboot, reboot, reboot...
Event manager, check for error messages.
Disk management>scan for new disks, open from here!
Device management, update driver, rollback driver... reboot.
Meh, play with it...
SubwayChamp said:
And did you try what I posted? Probably you need to check which drivers you have actually installed, some of them are sometimes redundant and not necessary, what you need is the Google ADB/fastboot that it is in the Google site, and regards Xiaomi all is in the Mi flash tool and Mi Unlock tool, see to the option to install the drivers hoping that you don't need the Qualcomm 9008-USB drivers.
Of course, this is assuming that you have a data cable not only a charger cable and the issue is not with the ROM itself.
Click to expand...
Click to collapse
can you give me the file for fastboot? now its showing “Unknown USB Device (Device Descriptor Request Failed)”
aidenskcyu said:
can you give me the file for fastboot? now its showing “Unknown USB Device (Device Descriptor Request Failed)”
Click to expand...
Click to collapse
Are you sure your device is actually in fastboot mode with that issue "Device Descriptor Request Failed"?
The drivers are in the Mi Flash tool, when you install the tools you can see the option to install the drivers that are already included in the Mi unlock tool.
From there, just follow the steps indicated in the pictures to update them.
SubwayChamp said:
Are you sure your device is actually in fastboot mode with that issue "Device Descriptor Request Failed"?
The drivers are in the Mi Flash tool, when you install the tools you can see the option to install the drivers that are already included in the Mi unlock tool.
From there, just follow the steps indicated in the pictures to update them.
Click to expand...
Click to collapse
i tried it but it has exclamation mark in android bootloader interface.
aidenskcyu said:
i tried it but it has exclamation mark in android bootloader interface.
Click to expand...
Click to collapse
It's not showing here an exclamation mark,
Can you upload the right SS?,
Also Did you install the fastboot drivers either from Mi Unlock tool or Mi Flash tool?
Try to install ADB and FastBoot drivers for redmi note 8
If Dosent work text here
SubwayChamp said:
It's not showing here an exclamation mark,
Can you upload the right SS?,
Also Did you install the fastboot drivers either from Mi Unlock tool or Mi Flash tool?
Click to expand...
Click to collapse
yes i did install it
aidenskcyu said:
yes i did install it
Click to expand...
Click to collapse
All is here in this same sequence.
i dont know why i get this error code 10.
aidenskcyu said:
i dont know why i get this error code 10.
Click to expand...
Click to collapse
Upload the same as my pictures 2 and 3 from your device manager, from the picture 2 you can use either from Xiaomi or Google.
Delete that Kedacom USB driver and replace for the proper ones, here you have the right guide https://xiaomifirmware.com/guides-and-tips/delete-kedacom-usb-device-driver-pc/
SubwayChamp said:
Upload the same as my pictures 2 and 3 from your device manager, from the picture 2 you can use either from Xiaomi or Google.
Delete that Kedacom USB driver and replace for the proper ones, here you have the right guide https://xiaomifirmware.com/guides-and-tips/delete-kedacom-usb-device-driver-pc/
Click to expand...
Click to collapse
somehow it got detected as android bootloader interface. it got detected too in miflash and tried to flash but i got stucked in flashint system.img. after a while it shows timeout error and after that i flash twrp recovery but i got a message that my battery is very low to flash it. will my phone charge in fastboot? because it keeps bootlooping now if ii dont go on fastboot mode
aidenskcyu said:
somehow it got detected as android bootloader interface. it got detected too in miflash and tried to flash but i got stucked in flashint system.img. after a while it shows timeout error and after that i flash twrp recovery but i got a message that my battery is very low to flash it. will my phone charge in fastboot? because it keeps bootlooping now if ii dont go on fastboot mode
Click to expand...
Click to collapse
Well, at least you got your device showed, no?
To power off the device you can put it in fastboot mode, after of approximately 10 minutes if the device is not attached to your PC, it'll power off, then you can charge it.
But if your device reacts to the power charger trying to boot to nowhere, then fastboot will charge the battery but very, very slowly.
Do you have bootloader unlocked? Why not flashing it through EDL mode?, you don't need battery power to do that.
I am trying for the first time to root my 7t pro McLaren, and I ran into a problem. When the boot loader is turned on, and I use fastboot devices, nothing happens. When I do adb devices with it powered on, it shows that its connected. I tried to use the oneplus usb driver update, and nothing happened. does anyone have any solutions? I have OEM unlocking turned on and SIM permantly unlocked. If it helps I'm running on windows 10.
KH-Squisshy said:
I am trying for the first time to root my 7t pro McLaren, and I ran into a problem. When the boot loader is turned on, and I use fastboot devices, nothing happens. When I do adb devices with it powered on, it shows that its connected. I tried to use the oneplus usb driver update, and nothing happened. does anyone have any solutions? I have OEM unlocking turned on and SIM permantly unlocked. If it helps I'm running on windows 10.
Click to expand...
Click to collapse
Hi.
What you want to do exactly?
To Root open bootloader as first.
Developer options /Default usb configuration/ file transfer. Then check if pc "see" your device. fastboot fastboot devices. If visible then u are at home let's say
Make sure your USB port on the phone is clean using compressed air. Though if it works with ADB it should also work in bootloader
Riski3Run said:
Hi.
What you want to do exactly?
To Root open bootloader as first.
Developer options /Default usb configuration/ file transfer. Then check if pc "see" your device. fastboot fastboot devices. If visible then u are at home let's say
Click to expand...
Click to collapse
I was trying to just root it, but I found out what it was. someone sent me the drivers to update my device in manage devices.