Moto G5 Plus proximity sensor issue - Moto G5 Plus Guides, News, & Discussion

Hi every one < I need some help from your side please
I have Moto G5 Plus it was lost imie on the official rom , so I flashed pixel experience android 10 rom and its working fine
but the problem that I faced now is : the phone screen turn off during the calls and never wake-up till the other called turn off the call
I downloaded many apps like xposed and many others without any changes
I tried the proximity counter app , the sensor is working and counting properly
Note : sometimes the sensor is working properly without any app
Any solutions please ??

i am also riding the same boat , it started from stock oreo in my case, currently i am on aicp 15 (maybe coz the device is almost 3 yrs old now, its sensor started giving erroneous results)

Related

Xiaomi Mi5 proximity sensor died

So, I've moved to LineageOS with my Mi5 at lineage-14.1-20170620-nightly-gemini and everything was fine.
About a week ago I've updated to lineage-14.1-20170704-nightly-gemini and all worked well still.
But yesterday proximity sensor on my phone gone wild: it stopped to work in all situations, but started to work wrong for WhatsApp: if I press play on voice message, screen goes off and WA plays message in main speaker (top one).
Right now I've updated firmware to this (Developer 7.7.6 Firmware from https://forum.xda-developers.com/mi-5/development/tool-flashable-firmware-twrp-easy-t3474898) and updated lineageOS to lineage-14.1-20170711-nightly-gemini but it didn't help.
Proximity sensor now looks completely dead: tried Sensor Box app from GoolePlay and it permanents shows 5.000305. Proximity sensor doesn't work during any calls, etc.
I found some topics with similar issue on Mi5 on miui forum, and sensor calibration seems to solve this issue on stock MIUI, but can't find any info about how to calibrate sensor on lineageOS.
Requesting any assistance, and especially from @bgcngm and @h2o64.
Thanks
Same problem here. Have you found any solution?
Best,
g.

(A7) Proximity sensor not working after Nougat update

Hi guys, after Nougat update on my SM-A720F proximity sensor stooped working.
When i make a call screen isn't off, it stays normal, I tried calibration app from google play, it helps for one or two calls and then screen stays on again.
There were no issues on previous firmware, i regret that i updated my phone. Guys help me, i don't want to play with firmwares, untill it's a safe way to go on previous (Android 6)
Thanks!
It happens on A5 2017 too. Restart your phone and it will work again. 7.0 isn't really perfect, still got a few bugs/glitches.

Proximity sensor stops work Android Pie

Does anybody has problem with proximity sensor in Android Pie?
For me it stops work after half day and only reboot helps. In Oreo I haven't this problem
I've gotten this problem during calls
Update: proximity sensor stop work in phone app. With other apps its works without problem.
Interesting. Has worked for me but I've only made a handful of calls since going to Pie.
Sent from my Pixel 2 XL using Tapatalk
new update: looks like I found why proximity stops work. I use Cube Call Recorder and this app after a couple calls "kills" proximity sensor in dialer app. I removed Cube and now everything ok.
I'm having this problem too, but I don't have any sort of call recording app. Randomly it just refuses to put the screen to sleep when I'm on a call. Really frustrating.
Same issue here, since few days I have notice that the proximity sensor during phone calls will not turn off the screen, only reboot restores sensor functionality that's annoying, also I have this pixel 2xl for 2weeks this is an irritating issue. Hope help comes soon.
P.S
No new software has been installed on this phone that I have not used on my previous phones essential ph1 and Samsung Galaxy S8.
Cheers.
Couldn't find this thread earlier.
I'm also facing the same issue now. Android Pie.
Anyone found a Solution?
#5 was my problem

Redmi Note 8 Pro Gyroscope Problem

As some of you guys might already know Redmi devices have Gyroscope issue but it get fixed with Calibration (in my case temporarily)
previously in Android pie, while playing pubg Gyroscope was working fine with no issue, but i had the issue with my gyroscope while charging where my aim was moving on its own even on a flat surface. but it used to happen while charging only (& my Gyroscope setting is always on with 190 sensitivity just for the info)
And now in Android 10 it happens after every 10, 15 minutes doesn't matter how many times i 've calibrated my device but it never get fixed permenantly.
But I know the temporarily solution:
About > All Specs >Tap 3 times on kernal version > Press on the top right corner & go to additional tools
Acc Calibration Tool:
Accelerometer ( not all values are zero) just calibrate your accelerometer, & your device should be on a flat surface
Gyroscope Calibration Tool:
Gyroscope (all values are zero but some are in (-ve) zero don't know why ?)
Calibrate Gyroscope - also device should be on a flat surface
check your Gyroscope issue with 'Compass app' and values should be constant on a flat surface
You can also use 'Gyroscope Test App'
in my case:
mine only gets fixed after calibrating and waiting for 20 seconds at least. i use Gyroscope test app to know whether my Gyroscope issue is fixed or not
and mine never get fixed after device reboot.
seems like this is the Hardware issue. i tried to hard reset changed rom to miui 12 came back to miui 11 but the issue is still there.
and calibration is the temporarily solution for me until i don't reboot my device.
didn't tried custom rom yet.
Did any of you guys have the similar issue, or any of you know how to fix it? Please Help!
Strange seems like no one is facing this issue
I am facing the same problem from past two days on my redmi note 8 pro . It can be fixed temporarily by rebooting the device . But after opening CIT by tapping kernel version my accelerometer is not showing anything it's blank
gkl1312 said:
I am facing the same problem from past two days on my redmi note 8 pro . It can be fixed temporarily by rebooting the device . But after opening CIT by tapping kernel version my accelerometer is not showing anything it's blank
Click to expand...
Click to collapse
Sorry to say that i cannot help ??
Facing the same issue. Screen doesn't rotate, accelerometer and gyroscope values are blank in CIT
On a steady table using the built in level function in the compass app was showing 1 degree (table not perfectly flat) for a couple of minutes and now it`s changed to 2 degrees and has been showing that for over five minutes, The only problem i have had is if i am on the home-screen in portrait mode with the phone on the table and click on my browser (opera) the screen will change to landscape mode, Then if i lift up the front of the phone the display will change to portrait mode, It does this with a few apps and it can be a pain, I could download a screen rotation all to fix the problem if i needed, So no major problems and i am not phone gamer, I prefer my 360 or PC
i hope this work for you
If your gyroscope is temporary work after restart you can fix it with my guide:
1.restart your device
2.open the cit test (multiple tap on kernel number)
3.calibrate your gyroscope in flat surface and make sure your gyroscope is still active
4.follow the other sensor calibration until you complete the compass calibration .
4.you can exit cit and check all your sensors
note:do this as fast as you can
Nouman112 said:
As some of you guys might already know Redmi devices have Gyroscope issue but it get fixed with Calibration (in my case temporarily)
previously in Android pie, while playing pubg Gyroscope was working fine with no issue, but i had the issue with my gyroscope while charging where my aim was moving on its own even on a flat surface. but it used to happen while charging only (& my Gyroscope setting is always on with 190 sensitivity just for the info)
And now in Android 10 it happens after every 10, 15 minutes doesn't matter how many times i 've calibrated my device but it never get fixed permenantly.
But I know the temporarily solution:
About > All Specs >Tap 3 times on kernal version > Press on the top right corner & go to additional tools
Acc Calibration Tool:
Accelerometer ( not all values are zero) just calibrate your accelerometer, & your device should be on a flat surface
Gyroscope Calibration Tool:
Gyroscope (all values are zero but some are in (-ve) zero don't know why ?)
Calibrate Gyroscope - also device should be on a flat surface
check your Gyroscope issue with 'Compass app' and values should be constant on a flat surface
You can also use 'Gyroscope Test App'
in my case:
mine only gets fixed after calibrating and waiting for 20 seconds at least. i use Gyroscope test app to know whether my Gyroscope issue is fixed or not
and mine never get fixed after device reboot.
seems like this is the Hardware issue. i tried to hard reset changed rom to miui 12 came back to miui 11 but the issue is still there.
and calibration is the temporarily solution for me until i don't reboot my device.
didn't tried custom rom yet.
Did any of you guys have the similar issue, or any of you know how to fix it? Please Help!
Click to expand...
Click to collapse
:::my note8 pro also has same issue
i also tried all the tricks, calibration and all stuff but it only worked temporarily. if i place my phone on flat surface, it stops moving for some minutes but starts moving again.
i even tried changing my miui version from global to indian varient but the problem is still on. these days when i press the phone on top left corner, the gyroscope moves even more faster and when i press it around middle, it starts moving in opposite direction but never stops. somewhere i have hheard that this may be due to hardware issue, because of heating.
Nouman112 said:
As some of you guys might already know Redmi devices have Gyroscope issue but it get fixed with Calibration (in my case temporarily)
previously in Android pie, while playing pubg Gyroscope was working fine with no issue, but i had the issue with my gyroscope while charging where my aim was moving on its own even on a flat surface. but it used to happen while charging only (& my Gyroscope setting is always on with 190 sensitivity just for the info)
And now in Android 10 it happens after every 10, 15 minutes doesn't matter how many times i 've calibrated my device but it never get fixed permenantly.
But I know the temporarily solution:
About > All Specs >Tap 3 times on kernal version > Press on the top right corner & go to additional tools
Acc Calibration Tool:
Accelerometer ( not all values are zero) just calibrate your accelerometer, & your device should be on a flat surface
Gyroscope Calibration Tool:
Gyroscope (all values are zero but some are in (-ve) zero don't know why ?)
Calibrate Gyroscope - also device should be on a flat surface
check your Gyroscope issue with 'Compass app' and values should be constant on a flat surface
You can also use 'Gyroscope Test App'
in my case:
mine only gets fixed after calibrating and waiting for 20 seconds at least. i use Gyroscope test app to know whether my Gyroscope issue is fixed or not
and mine never get fixed after device reboot.
seems like this is the Hardware issue. i tried to hard reset changed rom to miui 12 came back to miui 11 but the issue is still there.
and calibration is the temporarily solution for me until i don't reboot my device.
didn't tried custom rom yet.
Did any of you guys have the similar issue, or any of you know how to fix it? Please Help!
Click to expand...
Click to collapse
negative values are common like north0 east0 west-0 south-0, as referrence points of start and direction
I also have the same problem but it is on REDMI NOTE 10 PRO (INDIA VERSION sweetin), so can someone help us

Miui 12.5 issue?

Hi I have recently bought a second hand redmi note 8 pro to use with a drone I have also recently purchased.
everything has been working fine. Until last night 21/07/21 I had a notification of the new miui 12.5 update. which I left to do its thing. The issue is the screen does not respond to touch. it appears to boot up ok gets to the screen shown. I have had it on fastboot screen and also wiped all data (can't seem to get mi assistance to work.)
Has anyone else had the update/ issue?
How would you recommend proceeding.
I have the same problem (Redmi Note 8 Pro Global - MI firmware). After updating from 12.0.8, the touchscreen stopped working.
I had to roll back through the fastboot. I also tried to flash version 12.5.1.0 via fastboot - the problem persists.
The phone had a replacement display module, but with an original one.
There is an idea to try to flash it with a version for Indonesia or China, but so far I have not tested it.
Issue with SIM selection for calling on MIUI 12.5 Global - Redmi Note 8 Pro​
Anyone experiencing this bug with default SIM for call?
The Google Dialer will ask for which SIM to call on reboot even tho I already set it as SIM1 or SIM2 in the Settings.
The workaround is manually reselecting the SIM but only effective till next reboot.
Same exclusive Xiaomi Update Fail Forget about help or information from the official Support.
Connect a mouse with a USB-C to USB Adapter and backup your personal data.
I have exact same issue on this update. I also replaced the screen some time ago. I belive it's android 11 problem, because CFWs like PE doesn't work too. ROMs with Android 10 also seems weird to me, because digitizer keeps "jumping" and clicking random places. Android 9 - all works perfectly fine. I am going to find out which partition is used to use touchscreen and check if it's possible to flash it over PE ROM to solve the problems.
I have some problems after updating to MIUI 12.5.1:
1. Have to repeat the procedure twice for uploading any picture from gallery to anywhere on Internet. It doesn't work in first attempt.
2. Fingerprint sensor shows many errors off & on. 3-4 attempts to open the phone. Tried re-registering my fingers.
3. Option of Completely Hide Notch gone
4. While playing Facebook videos, sound continues, video stops.
Too annoying these bugs are.
AlphaBravo said:
I have some problems after updating to MIUI 12.5.1:
1. Have to repeat the procedure twice for uploading any picture from gallery to anywhere on Internet. It doesn't work in first attempt.
2. Fingerprint sensor shows many errors off & on. 3-4 attempts to open the phone. Tried re-registering my fingers.
3. Option of Completely Hide Notch gone
4. While playing Facebook videos, sound continues, video stops.
Too annoying these bugs are.
Click to expand...
Click to collapse
5. Battery drain ("...even on miui 12.5 battery drain too much high...")
Compass.
slashimi said:
I have exact same issue on this update. I also replaced the screen some time ago. I belive it's android 11 problem, because CFWs like PE doesn't work too. ROMs with Android 10 also seems weird to me, because digitizer keeps "jumping" and clicking random places. Android 9 - all works perfectly fine. I am going to find out which partition is used to use touchscreen and check if it's possible to flash it over PE ROM to solve the problems.
Click to expand...
Click to collapse
Just now,i found that the user Wai_Yan
slashimi said:
I have exact same issue on this update. I also replaced the screen some time ago. I belive it's android 11 problem, because CFWs like PE doesn't work too. ROMs with Android 10 also seems weird to me, because digitizer keeps "jumping" and clicking random places. Android 9 - all works perfectly fine. I am going to find out which partition is used to use touchscreen and check if it's possible to flash it over PE ROM to solve the problems.
Click to expand...
Click to collapse
Yes, the great manufacturer has kept its information behind the mountain. I have just found a contribution to this in the mi community.
It only briefly mentions that repairs should be made with an official display. I also do not understand why Xiaomi makes such a secret of it and does not give the reasons. Link
I have installed the Global 12.0.5 Stable QGGEUXM and I am also aware of these display anomalies.
Do you have any results in the project?
Boo-Kah-Kee said:
Just now,i found that the user Wai_Yan
Yes, the great manufacturer has kept its information behind the mountain. I have just found a contribution to this in the mi community.
It only briefly mentions that repairs should be made with an official display. I also do not understand why Xiaomi makes such a secret of it and does not give the reasons. Link
I have installed the Global 12.0.5 Stable QGGEUXM and I am also aware of these display anomalies.
Do you have any results in the project?
Click to expand...
Click to collapse
I've tested all partitions but any of them seems to be changing display driver. So sorry, no luck there, I think we're stuck with android 9. It looks like it is hard-coded into firmware.
slashimi said:
I've tested all partitions but any of them seems to be changing display driver. So sorry, no luck there, I think we're stuck with android 9. It looks like it is hard-coded into firmware.
Click to expand...
Click to collapse
I noticed a break in a layer of the display within 14 days of use. There was no heavy use or pressure on the display. Xiaomi - K.O.
How to bring back the option of "Completely Hide the Notch" in MIUI 12.5.1?
I have just realised I didn't update. I was having lots of trouble fixing this. I think my reply from xiaomi was wait for the next update this might fix it.
Thank you to Boo-Kah-Kee, I never knew you could plug a mouse in.
anyway I eventually got it back to the prievious rom by following this Video.
No more updates it works fine.

Categories

Resources