Related
Can someone tell me where I can find over-clock able kernel for my international One X? And what is the biggest clock speed on ONE X?
At present faux kernel can oc depending on what variant CPU you have but max at 1.6ghz
I have a v2 and can do 1.55 quad fine
Sent from my HTC One X using xda app-developers app
Eternity Project has an OC version up to 1.7GHz single core and 1.6GHz quad core
ZeroInfinity said:
Eternity Project has an OC version up to 1.7GHz single core and 1.6GHz quad core
Click to expand...
Click to collapse
Can you post link?
stefan063 said:
Can you post link?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1640532
Be careful of OC, always remember, not all chips are made equal
About last Repacked Eternity Project for ARHD 9.x.x
Hello,
I try the Last repacked eternity project kernel for ARHD 9.x.x the Kernel: 3.4 v0.38 (Overclocked) at :
http://forum.xda-developers.com/showthread.php?t=1654982
But the module file was repacked for CMW ROM.
Who find good repacked module corresponding to this kernel ?
Thank you for jour help.
Underclock
As this thread is about setting CPU speeds, can somebody help me with my problem as no one is responding?
Its about underclocking..
http://forum.xda-developers.com/showthread.php?t=1868011
Thanks in advance!
how does the OC work? i mean then running all our core it is limited to 1.2 ghz and is 1.5 on a single core.
does that men all cores run at the OC value or just the single core?
Sent from my Transformer TF101 using xda app-developers app
I suggest you flash faux's kernel.
It can oc to 1.6GHZ for most user~
and it support s2W!
I expect many users will be aware of this information, but just in case you aren't.
Anyone overclocking should be aware that this will usually lead to higher power consumption which leads to more heat produced and lower battery life.
Especially if it is necessary to overvolt to acheive higher clock frequencies with stability.
Power consumption is proportional to Voltage squared, so small increases in core coltage can result in larger increases in power consumption than mught be thought.
Needless to say this can have negative impacts on battery discharge time and overall life (due to higher temperatures).
Plus there may be some throttling back of frequency if high temperatures are reached. Also possible that frequency may be reduced to 1Ghz maximum when battery voltage is low (i.e when discharged)
Hope this is helpful (first post here)
paul_59 said:
I expect many users will be aware of this information, but just in case you aren't.
Anyone overclocking should be aware that this will usually lead to higher power consumption which leads to more heat produced and lower battery life.
Especially if it is necessary to overvolt to acheive higher clock frequencies with stability.
Power consumption is proportional to Voltage squared, so small increases in core coltage can result in larger increases in power consumption than mught be thought.
Needless to say this can have negative impacts on battery discharge time and overall life (due to higher temperatures).
Plus there may be some throttling back of frequency if high temperatures are reached. Also possible that frequency may be reduced to 1Ghz maximum when battery voltage is low (i.e when discharged)
Hope this is helpful (first post here)
Click to expand...
Click to collapse
CPU throttle starts at 85c with thermal TJ-max of 99c.
also there is many debates about this, higher speed need more power which drains battery, but that said it means work gets faster meaning it can idle faster saving power, same the other side slower speeds save power but take longer to get work done using more power.
Sent from my Transformer TF101 using xda app-developers app
stefan063 said:
Can someone tell me where I can find over-clock able kernel for my international One X? And what is the biggest clock speed on ONE X?
Click to expand...
Click to collapse
Go to Faux123 and read the opening post
http://forum.xda-developers.com/showthread.php?t=1647993
it will teach you about Tegra 3 variants.
Flash Faux123 latest kernel to know what variant you have.
You can have 1.5ghz quadcore minimum, except if you have the poor variant0 of the Tegra 3, and 1.6ghz quadcore max if you have variant 3
So the overclocking you can achieve depends on your Tegra 3 variant, whatever the kernel, don't trust the figures in kernel threads titles, they just give the max if you have variant 3. And the majority of people have variant 1 so limited to 1.5ghz quadcore and there's nothing to do about it, no future kernel can change the way your CPU was manufactured.
Just, SetCPU can display 1.6ghz or more, but if you have variant 0 or 1 it will never use it (CPUspy will say 1550 and 1600 are unused frequencies)
Variant 1 can go upt to 1550mhz but not for quadcore, so who cares....! Same for kernels claiming up to 1.7ghz, it's in single/dual core, so once more, who cares?
What is important is what max speed you can achieve in quadcore, nothing else, and the limits are clearly defined by your Tegra3 variant
"all chips are not created equal" was a silly bull**** invented more than one year ago as an easy answer to noobs claiming they couldn't overclock their dual core at their max. Now, on the One-X and because of Nvidia unstable quality"all chips are not created equal" is sadly the truth.
PS: wrong=> to say that overclocking means more voltage, undervolting a custom kernel a little can surprisingly reduce heat when you push your CPU to its max,I can have both 1500mhz quadcore and less voltage than stock, as well as less heat (I was surprised, really, on the Sensation I had always found undervolting kinda useless)
PPS: true=> thermal throttle will always come pretty soon and reduce your max speed......
i900frenchaddict said:
Go to Faux123 and read the opening post
http://forum.xda-developers.com/showthread.php?t=1647993
it will teach you about Tegra 3 variants.
Flash Faux123 latest kernel to know what variant you have.
You can have 1.5ghz quadcore minimum, except if you have the poor variant0 of the Tegra 3, and 1.6ghz quadcore max if you have variant 3
So the overclocking you can achieve depends on your Tegra 3 variant, whatever the kernel, don't trust the figures in kernel threads titles, they just give the max if you have variant 3. And the majority of people have variant 1 so limited to 1.5ghz quadcore and there's nothing to do about it, no future kernel can change the way your CPU was manufactured.
Just, SetCPU can display 1.6ghz or more, but if you have variant 0 or 1 it will never use it (CPUspy will say 1550 and 1600 are unused frequencies)
Variant 1 can go upt to 1550mhz but not for quadcore, so who cares....! Same for kernels claiming up to 1.7ghz, it's in single/dual core, so once more, who cares?
What is important is what max speed you can achieve in quadcore, nothing else, and the limits are clearly defined by your Tegra3 variant
"all chips are not created equal" was a silly bull**** invented more than one year ago as an easy answer to noobs claiming they couldn't overclock their dual core at their max. Now, on the One-X and because of Nvidia unstable quality"all chips are not created equal" is sadly the truth.
PS: wrong=> to say that overclocking means more voltage, undervolting a custom kernel a little can surprisingly reduce heat when you push your CPU to its max,I can have both 1500mhz quadcore and less voltage than stock, as well as less heat (I was surprised, really, on the Sensation I had always found undervolting kinda useless)
PPS: true=> thermal throttle will always come pretty soon and reduce your max speed......
Click to expand...
Click to collapse
Nice words and I just won't to add variant 1 can now go to 1.55ghz with faux 07vf I'm currently usein with the lowest most stable undervolt values and less heat than stock kernel and gameplay is amazing also on arhd 9.4
Sent from my HTC One X using xda premium
treebill said:
CPU throttle starts at 85c with thermal TJ-max of 99c.
also there is many debates about this, higher speed need more power which drains battery, but that said it means work gets faster meaning it can idle faster saving power, same the other side slower speeds save power but take longer to get work done using more power.
Sent from my Transformer TF101 using xda app-developers app
Click to expand...
Click to collapse
Your argument makes sense, but unless the governor is very efficient at controlling the CPU speed very quickly, in most cases your argument doesn’t hold true. For example when playing a game or running a CPU intensive application (where overclocking has any use) the processor works at full speed for the duration of the application.
EDIT: Frankly I don’t see any point in overclocking a phone like One X. I don’t play many games, but the few games I have played ran very smoothly. And if people are overclocking because of the (barely noticeable) laggy UI then overclocking is not a real fix anyway. Installing a custom ROM (perhaps JB), a different launcher, tweaking background apps/services are some of the more sensible and effective things to do instead.
No disrespect to the devs who are working on overclocking, but IMO HTC and nVidia must have spent a considerable amount of time and effort designing the CPU and deciding the optimal operational parameters to maximize performance while minimizing battery drain. Therefore anything out of those parameters (in theory at least) should impact either stability, or battery life. Perhaps the values HTC has decided are not the maximum possible values , because I assume they would have designed the phone to handle few exceptional conditions (i.e: extremely hot weathers). But I think over clocking would probably cause more problems in the long run than whatever the little gains you experience in short term. Just my 2c.
joewong1991 said:
Nice words and I just won't to add variant 1 can now go to 1.55ghz with faux 07vf I'm currently usein with the lowest most stable undervolt values and less heat than stock kernel and gameplay is amazing also on arhd 9.4
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
Late reply, I hope you'll read it anyway
I tried faux 007b5, so overclock free too, I had 1.55ghz indeed, but never for quadcore, just for single or dual. Sadly I wasn't able to reach 1.5ghz quadcore but 1.4
With 007u, I have 1.5ghz quadcore, but 1.55 is an unused frequency
Can you check, with tegrastats, if you reach 1.55ghz quadcore or only for 1,2 (or3??) cores?
i900frenchaddict said:
Late reply, I hope you'll read it anyway
I tried faux 007b5, so overclock free too, I had 1.55ghz indeed, but never for quadcore, just for single or dual. Sadly I wasn't able to reach 1.5ghz quadcore but 1.4
With 007u, I have 1.5ghz quadcore, but 1.55 is an unused frequency
Can you check, with tegrastats, if you reach 1.55ghz quadcore or only for 1,2 (or3??) cores?
Click to expand...
Click to collapse
I tried tegrastats and I got 1.55 4 cores for about 20 sec and then 2 shut of and then ran 2 at 1150 playin dead trigger and on cod zombies 2 cores at 1350 witch I find strange faux 0105b
Sent from my HTC One X using xda premium
Curious if overclocking the CPU and GPU is really worth it looking at performance vs battery life. My device seems zippy already, but I'm just wondering if overclocking would improve anything seeing as some other tablets are moving onto 2.0+GHz.
If so, what kernel would you recommend me to use?
I would not overclock it, if you think it is very fast already. Overclocking from 1.5GHz to 2+GHz is probably mostly used for people trying to get the highest benchmark score.
i used to test roms and over clock the kernels while testing now iam back to basics
as i noticed even with a small overclock the system got hot around camera area on most kernels
that was enough for me to stop oclocking
Hi,
i've got an international D855 here. i've tweaked it a lot.
it's overclocked to 2.8ghz (777jon's kernel), and running ressurection remix rom.
i also increased thermal throttling not to act up until 80 degrees celcius.
i use synapse to change kernel settings and core clocks.
i use "cpu temperature" app to monitor everything about my cpu. including clock speed.
when i go ahead and set the minimum speed to 2.8 and the maximum to 2.8, and enable all cores and enable all cores to have boost at the same time. it works for everything.
but when i start antutu, and do a benchmark. "cpu temperature" tells me that while the benchmark was active, the clock speed ramps down for a short moment of the benchmark. but the temperature never got above 65 degrees celcius.
i cannot acces the 3845#*855# code for some reason. if i try to dial that in, and press call. nothing happens. so i cannot deactivate thermal throttling that way.
so my problem here is. i've locked the cpu clock to the maximum. i've also locked the gpu clock to maximum. it all works outside antutu. but when i start an antutu benchmark, halfway through it, the clock speed decreases. and that's weird because i've locked the clock speed, and thermal throttling shouldn't already act up.
can anyone help me with the issue of the clock speed going down?
if i need to give more information, ask please. this is my first post. so i'm also sorry if this is in the wrong forum
edit: i just noticed there's a q&a forum. i'll post my post there. but i don't know how to delete this one. i'm sorry.
Why would you want to fry your phone anyways?
i'm not trying to fry it. i'm a pc overclocker. on pc's i try to get the highest possible benchmark score. and i'm going to do that with phones too. i know the limits of a chip. and i want to push the chip to it's limit to get the highest score.
so far i'm at 50.3k on antutu. but my goal is to beat the galaxy note pro, or maybe the htc one m9.
so yeah, i do know the limits. i know my way around overclocking and cpu configurations. i'm coming from pc overclocking.
but i just can't figure out why it clocks down at a certain point while it's at decent temperatures.
So you want your LG G3 to become the strongest G3 in the universe? Super Prince G3.
Quit the Dragon Ball talk.
You will end up messing up CPU so it will stutter all over the system.
This isn't PC.
why are you making fun of me. i just like to do this stuff.
i bought this lg g3 just for overclocking. and if it breaks, i'm done.
it's not my daily driver or anything.
i'm just doing what i love doing. and that you're making fun of me, doesn't help.
edit: to add to that. i've broken enough pc cpu's. but because of that, i've learned my way around. and now i'm doing the same with phones.
im not saying i'm trying to break the phone. but i'm going as far as it can. and if it happens to break, i've learned from it.
Hey guys, I'm new with Moto G5, and i want to know how I can underclock my processor cores, because 960 MHz is too much for minimum clock speed. Is there any custom kernel with underclock feature available for latest stock rom Oreo?
I am totally with you on the low frequency. I guess @infixremix might help you/us. He recently posted in the Alize Kernel thread. You might want to hit him up on telegram.
Sadly, development for our device is mostly dead. I tried reading up on building a Rom and/or Kernel but I don't have the time nor skills to do it.
leonardohenrique10 said:
Hey guys, I'm new with Moto G5, and i want to know how I can underclock my processor cores, because 960 MHz is too much for minimum clock speed. Is there any custom kernel with underclock feature available for latest stock rom Oreo?
Click to expand...
Click to collapse
Clock speed will not improve battery its the lower voltage that will.
infixremix said:
Clock speed will not improve battery its the lower voltage that will.
Click to expand...
Click to collapse
Anyway, there are any custom kernel with voltage or clock control that works with stock ROM Oreo? Your Alize kernel won't boot with stock ROM on my device
Hello !
I've heard that it's possible to overclock our GPU to 905mhz by removing frequency table from dtb - when all frequencies are gone the chip defaults to 905mhz on GPU.
Now how do you do that ? I have no idea... Been asking around for couple of days and anyone that knows won't tell '-'
Most I've gotten is that dtb is inside boot ; some new 870's are locked and can't go even 1mhz above... That's all
Now make out of that what you want , it's rather conflicting info when there are reports that it works just fine one hentai os , even overclocks to 940mhz - Keep all frequencies just add a new one on top (940 MHz and edit voltage table for it to turbo 1 voltage). That's the best solution for anyone doing overclocking... You get to keep all other frequencies as well but it does not work on other ROMs due to hentai os using a different device tree to everyone else...
Hence why I'm looking into how to delete whole table to at least unlock 905mhz. I'll be using peltier cooler so heat is no issue I just want performance - its heartbreaking when 700 series chips can score much much higher than 870 simply because they can be overclocked unlike ours....
I'm all for overclocking and optimizing our chipsets, but do you have a problem with your phone?
Because for me, this chipset is crazy fast, and every game and app I throw at it, plays smoothly. I never have stutters in any game or app.
dreamytom said:
I'm all for overclocking and optimizing our chipsets, but do you have a problem with your phone?
Because for me, this chipset is crazy fast, and every game and app I throw at it, plays smoothly. I never have stutters in any game or app.
Click to expand...
Click to collapse
I do feel the lack of performance though... Frame instability and not quite 60fps in more heavy games.
Even snap 888 struggles in certain games and considering that snap 865 already is able to meet and exceed perfomance of 888 doing the same on 870 will , well offer even better experience once heat is handled...
I'm currently looking for earliest rom for this device to see if it would be possible to do it there w kona but no luck so far...
I was also recently view a photo of the Poco F3 8/256GB and it was running at 1072MHz, the only information I had from whoever passed this photo was that it was from a Russian forum/chat and that it was only possible in the first batches of the 870!
I'll keep following it, if I find something, I'll let you know!
vinyimp said:
I was also recently view a photo of the Poco F3 8/256GB and it was running at 1072MHz, the only information I had from whoever passed this photo was that it was from a Russian forum/chat and that it was only possible in the first batches of the 870!
I'll keep following it, if I find something, I'll let you know!
Click to expand...
Click to collapse
That's crazy! At 1072mhz he must have surpassed Rog5's performance. All I am seeing is that it overclocks to 683mhz and that is it otherwise it goes into bootloop. What good is 13mhz anyways? Rather keep it stock then.
Bosstek said:
That's crazy! At 1072mhz he must have surpassed Rog5's performance. All I am seeing is that it overclocks to 683mhz and that is it otherwise it goes into bootloop. What good is 13mhz anyways? Rather keep it stock then.
Click to expand...
Click to collapse
There are many photos on telegram of people overclocking their 870 recently... Insane results , 99℅ stability and 25℅ higher scores in 3d mark .
Optimus drunk kernel + konabess overclock .
If anyone feels like trying post results here , if it worked or not... I heard somewhere along the way that it only works on hentai os even if your phone is an early batch model and since optimus kernel is based on utsav's kernel ( hentai os kernel ) , there's a good chance that installing it will allow overclock on aosp roms.
I don't wanna try personally for many reasons - optimus d kernel devloper sucks in my opinion, I tried his earlier kernel when it was based on quantic kernel and let's just say he butchered it and made something 10x worse... I think if utsav's kernel can allow for overclock you're better off using that instead lol
Might try later on idk , if anyone else does please keep us updated!
1. Install aosp rom
2. Install Optimus drunk / Utsav kernel ( search his name on google/xda and you'll find his kernel )
3. Try overclocking in konabess past 683mhz ( make backup first !!! Then transfer to PC )
4. If it bootloops flash backup via twrp / fastboot
Rstment ^m^ said:
There are many photos on telegram of people overclocking their 870 recently... Insane results , 99℅ stability and 25℅ higher scores in 3d mark .
Optimus drunk kernel + konabess overclock .
If anyone feels like trying post results here , if it worked or not... I heard somewhere along the way that it only works on hentai os even if your phone is an early batch model and since optimus kernel is based on utsav's kernel ( hentai os kernel ) , there's a good chance that installing it will allow overclock on aosp roms.
I don't wanna try personally for many reasons - optimus d kernel devloper sucks in my opinion, I tried his earlier kernel when it was based on quantic kernel and let's just say he butchered it and made something 10x worse... I think if utsav's kernel can allow for overclock you're better off using that instead lol
Might try later on idk , if anyone else does please keep us updated!
1. Install aosp rom
2. Install Optimus drunk / Utsav kernel ( search his name on google/xda and you'll find his kernel )
3. Try overclocking in konabess past 683mhz ( make backup first !!! Then transfer to PC )
4. If it bootloops flash backup via twrp / fastboot
Click to expand...
Click to collapse
Rstment ^m^ said:
There are many photos on telegram of people overclocking their 870 recently... Insane results , 99℅ stability and 25℅ higher scores in 3d mark .
Optimus drunk kernel + konabess overclock .
If anyone feels like trying post results here , if it worked or not... I heard somewhere along the way that it only works on hentai os even if your phone is an early batch model and since optimus kernel is based on utsav's kernel ( hentai os kernel ) , there's a good chance that installing it will allow overclock on aosp roms.
I don't wanna try personally for many reasons - optimus d kernel devloper sucks in my opinion, I tried his earlier kernel when it was based on quantic kernel and let's just say he butchered it and made something 10x worse... I think if utsav's kernel can allow for overclock you're better off using that instead lol
Might try later on idk , if anyone else does please keep us updated!
1. Install aosp rom
2. Install Optimus drunk / Utsav kernel ( search his name on google/xda and you'll find his kernel )
3. Try overclocking in konabess past 683mhz ( make backup first !!! Then transfer to PC )
4. If it bootloops flash backup via twrp / fastboot
Click to expand...
Click to collapse
Is there a way a to know if we have one of the early batches? I have poco f3 and havent even updated it to latest miui. I am still on 12.0.3 lol and man as far as perfirmance is concerned I am really not seeing huge performance gains over miui to be honest. Like there is this one youtuber who almost checks all roms and there are only some to trump miui in bechmarks and in Pubg gameplay the results look to be the same. It lags where Miui lags and performs great where Miui performs great. On top of that if we add bugs and the sheer level of dullness of pure stock android I dont see a reason to flash a custom rom( the super wallpapers and AOD on miui is great). I was really excited about overclocking though because it had insane performance gains one guy has posted a article on xda overclocking 865 to almost 900mhz and comes neck and neck with sd888 in gpu. I asked him about overclocking 870 and he said it seems to be not possible but we can try to disable thermal throttling and it will still stay below sd888 temperatures and will have the same performance. I do doubt it though because the real performance comes with overclocking and with only 683mhz clock I dont see it beating sd888 because if the device runs cool it can almost use 100% and even with full performance it wont beat 888 but thats what he said.
Bosstek said:
Is there a way a to know if we have one of the early batches? I have poco f3 and havent even updated it to latest miui. I am still on 12.0.3 lol and man as far as perfirmance is concerned I am really not seeing huge performance gains over miui to be honest. Like there is this one youtuber who almost checks all roms and there are only some to trump miui in bechmarks and in Pubg gameplay the results look to be the same. It lags where Miui lags and performs great where Miui performs great. On top of that if we add bugs and the sheer level of dullness of pure stock android I dont see a reason to flash a custom rom( the super wallpapers and AOD on miui is great). I was really excited about overclocking though because it had insane performance gains one guy has posted a article on xda overclocking 865 to almost 900mhz and comes neck and neck with sd888 in gpu. I asked him about overclocking 870 and he said it seems to be not possible but we can try to disable thermal throttling and it will still stay below sd888 temperatures and will have the same performance. I do doubt it though because the real performance comes with overclocking and with only 683mhz clock I dont see it beating sd888 because if the device runs cool it can almost use 100% and even with full performance it wont beat 888 but thats what he said.
Click to expand...
Click to collapse
You have to try for yourself and see , if it bootloops it's not an early model....
The results difference is huge , wdym you don't see it beating 888. Snapdragon 865 already has practically the same performance , only loosing in cpu department. If you overclock gpu in 870 you are already leagues ahead off 888 - same cpu performance + much better gpu performance. All at the lower heat than 888.
Sadly no devloper is paying any attention to this. I digged up that if you remove any and all mentions in kernel about frequency table the chip will lock itself at it's highest supported gpu freq ( 940mhz + ) - this could possibily work even on locked devices? I have no idea , no kernel devloper that I asked even responded lol
You are on your own to try and get it to work , they obv won't
Rstment ^m^ said:
You have to try for yourself and see , if it bootloops it's not an early model....
The results difference is huge , wdym you don't see it beating 888. Snapdragon 865 already has practically the same performance , only loosing in cpu department. If you overclock gpu in 870 you are already leagues ahead off 888 - same cpu performance + much better gpu performance. All at the lower heat than 888.
Sadly no devloper is paying any attention to this. I digged up that if you remove any and all mentions in kernel about frequency table the chip will lock itself at it's highest supported gpu freq ( 940mhz + ) - this could possibily work even on locked devices? I have no idea , no kernel devloper that I asked even responded lol
You are on your own to try and get it to work , they obv won't
Click to expand...
Click to collapse
[Question] CPU clock/voltage control on kona · Issue #7 · libxzr/KonaBess
I wanted to ask, was CPU overclocking ever figured out on kona? My research led me to the qcom-cpufreq-hw driver which seems to read the frequency/voltage values from some sort of memory-mapped har...
github.com
TrustZone simply ends with all our dreams!
I did overclock my SD865 gpu to 1020mhz
YuanYuzu said:
I did overclock my SD865 gpu to 1020mhz
Click to expand...
Click to collapse
Well of course you did but SD870 is a different story.
Hello Guys,
First this first Snapdragon 870 is impossible to Overclock on Chip Kona v2.1 guys it is hardware lock on software just like Snapdragon 855+/860 is max 692MHz.
Yes we can now if you have early model with Kona v2.0 search for
Check dumpstate board on miui bug report
If kona-v2.1 then max 683Mhz.
if you have smaller you number table is unlocked on your Poco F3.
I have all info on Konabess Support group
I have telegram Adreno GPUs &Konabess Support group if you want know more this things.
Second don't do anything stupid like 1020MHz or anything like that Voltage Regular is design for 905MHz and can sustain up to 950MHz at MAX.
Most devices 940MHz gives better performance than 950MHz because of performance.
Third thing because of Voltage Regular from Qualcomm overclocking above 950MHz doesn't bring any new performance only lowers it.
You have to check for GPU stability by locking in Kernel manager min and max frequency and frequency you want test.
At that level even the best SOC get UI lag and unstable performance.
In real benchmark scores are lower on 1020MHz vs 925MHz because of Voltage Regular.
In Games like Breath of the Wild on EGG NS performance wins with 888 as well as 8G1 and fps stays the same 925MHz vs 1020MHz.
If you do anything above 950MHz you risk of bricking your device in couple of weeks.
You can't just add 905MHz at ridiculous high Voltage like Turbo_L1 which is 416mv will get massive throttling.
You have to design new frequency table and new frequency at good stable voltage for every device.
Adreno 650 at 925MHz or 940MHz gives almost 5700 points in 3Dmark Wild life.
In Gigaflops FP32 it beast Snapdragon 888 by 10% more raw power.
Adreno 660 on 840 MHz has 1702 Gigaflops
Adreno 650 on 905 MHz has 1853 Gigaflops
Adreno 650 on 925MHz has 1894 Gigaflops
Adreno 650 on 940 MHz has 1925 Gigaflops
If you want know more read my XDA Thead
Xiaomi Mi 10T with Snapdragon 865 beats ROG phone 5 with GPU Overclock
Hi I have Xiaomi Mi 10T with Snapdragon 865 with Adreno 650 GPU and 8 GB LPDDR5 RAM and I used Konabess app to Overclock GPU to beat ROG Phone 5 in Vulkan performance. If you need anything help here is my new group on Telegram for support in...
forum.xda-developers.com
Here are additional benchmark if anyone is interested
Xiaomi Mi 10T with Snapdragon 865 beats ROG phone 5 with GPU Overclock
Hi I have Xiaomi Mi 10T with Snapdragon 865 with Adreno 650 GPU and 8 GB LPDDR5 RAM and I used Konabess app to Overclock GPU to beat ROG Phone 5 in Vulkan performance. If you need anything help here is my new group on Telegram for support in...
forum.xda-developers.com
If you want know more ask on my support group on Telegram search
Konabess Adreno GPU Support Group
Rstment ^m^ said:
Hello !
I've heard that it's possible to overclock our GPU to 905mhz by removing frequency table from dtb - when all frequencies are gone the chip defaults to 905mhz on GPU.
Now how do you do that ? I have no idea... Been asking around for couple of days and anyone that knows won't tell '-'
Most I've gotten is that dtb is inside boot ; some new 870's are locked and can't go even 1mhz above... That's all
Now make out of that what you want , it's rather conflicting info when there are reports that it works just fine one hentai os , even overclocks to 940mhz - Keep all frequencies just add a new one on top (940 MHz and edit voltage table for it to turbo 1 voltage). That's the best solution for anyone doing overclocking... You get to keep all other frequencies as well but it does not work on other ROMs due to hentai os using a different device tree to everyone else...
Hence why I'm looking into how to delete whole table to at least unlock 905mhz. I'll be using peltier cooler so heat is no issue I just want performance - its heartbreaking when 700 series chips can score much much higher than 870 simply because they can be overclocked unlike ours....
Click to expand...
Click to collapse
Pretty sure you can overclock the GPU with custom kernel alone, it involves you to take out some security checks which could be potentially "blowing up" your device if you mess something up.
However the thing about the 905mhz without table is something I've also heard for the SD 865 plus variant. I'll try to make some kernels without the table and see how the chipsets act on it.
Danishblunt said:
Pretty sure you can overclock the GPU with custom kernel alone, it involves you to take out some security checks which could be potentially "blowing up" your device if you mess something up.
However the thing about the 905mhz without table is something I've also heard for the SD 865 plus variant. I'll try to make some kernels without the table and see how the chipsets act on it.
Click to expand...
Click to collapse
Send some updates when you do!*
YuanYuzu said:
I did overclock my SD865 gpu to 1020mhz
Click to expand...
Click to collapse
Bro can u help me overclock my 870?
Bosstek said:
Is there a way a to know if we have one of the early batches? I have poco f3 and havent even updated it to latest miui. I am still on 12.0.3 lol and man as far as perfirmance is concerned I am really not seeing huge performance gains over miui to be honest. Like there is this one youtuber who almost checks all roms and there are only some to trump miui in bechmarks and in Pubg gameplay the results look to be the same. It lags where Miui lags and performs great where Miui performs great. On top of that if we add bugs and the sheer level of dullness of pure stock android I dont see a reason to flash a custom rom( the super wallpapers and AOD on miui is great). I was really excited about overclocking though because it had insane performance gains one guy has posted a article on xda overclocking 865 to almost 900mhz and comes neck and neck with sd888 in gpu. I asked him about overclocking 870 and he said it seems to be not possible but we can try to disable thermal throttling and it will still stay below sd888 temperatures and will have the same performance. I do doubt it though because the real performance comes with overclocking and with only 683mhz clock I dont see it beating sd888 because if the device runs cool it can almost use 100% and even with full performance it wont beat 888 but thats what he said.
Click to expand...
Click to collapse
check your dumpstate on miui bug report and seach for a word 2.1 , if you see chip version 2.1 its a new version but i think the early batches is the one that doest have any design on the back cover just a flat color