Can someone tell me where I can find over-clock able kernel for my international One X? And what is the biggest clock speed on ONE X?
At present faux kernel can oc depending on what variant CPU you have but max at 1.6ghz
I have a v2 and can do 1.55 quad fine
Sent from my HTC One X using xda app-developers app
Eternity Project has an OC version up to 1.7GHz single core and 1.6GHz quad core
ZeroInfinity said:
Eternity Project has an OC version up to 1.7GHz single core and 1.6GHz quad core
Click to expand...
Click to collapse
Can you post link?
stefan063 said:
Can you post link?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1640532
Be careful of OC, always remember, not all chips are made equal
About last Repacked Eternity Project for ARHD 9.x.x
Hello,
I try the Last repacked eternity project kernel for ARHD 9.x.x the Kernel: 3.4 v0.38 (Overclocked) at :
http://forum.xda-developers.com/showthread.php?t=1654982
But the module file was repacked for CMW ROM.
Who find good repacked module corresponding to this kernel ?
Thank you for jour help.
Underclock
As this thread is about setting CPU speeds, can somebody help me with my problem as no one is responding?
Its about underclocking..
http://forum.xda-developers.com/showthread.php?t=1868011
Thanks in advance!
how does the OC work? i mean then running all our core it is limited to 1.2 ghz and is 1.5 on a single core.
does that men all cores run at the OC value or just the single core?
Sent from my Transformer TF101 using xda app-developers app
I suggest you flash faux's kernel.
It can oc to 1.6GHZ for most user~
and it support s2W!
I expect many users will be aware of this information, but just in case you aren't.
Anyone overclocking should be aware that this will usually lead to higher power consumption which leads to more heat produced and lower battery life.
Especially if it is necessary to overvolt to acheive higher clock frequencies with stability.
Power consumption is proportional to Voltage squared, so small increases in core coltage can result in larger increases in power consumption than mught be thought.
Needless to say this can have negative impacts on battery discharge time and overall life (due to higher temperatures).
Plus there may be some throttling back of frequency if high temperatures are reached. Also possible that frequency may be reduced to 1Ghz maximum when battery voltage is low (i.e when discharged)
Hope this is helpful (first post here)
paul_59 said:
I expect many users will be aware of this information, but just in case you aren't.
Anyone overclocking should be aware that this will usually lead to higher power consumption which leads to more heat produced and lower battery life.
Especially if it is necessary to overvolt to acheive higher clock frequencies with stability.
Power consumption is proportional to Voltage squared, so small increases in core coltage can result in larger increases in power consumption than mught be thought.
Needless to say this can have negative impacts on battery discharge time and overall life (due to higher temperatures).
Plus there may be some throttling back of frequency if high temperatures are reached. Also possible that frequency may be reduced to 1Ghz maximum when battery voltage is low (i.e when discharged)
Hope this is helpful (first post here)
Click to expand...
Click to collapse
CPU throttle starts at 85c with thermal TJ-max of 99c.
also there is many debates about this, higher speed need more power which drains battery, but that said it means work gets faster meaning it can idle faster saving power, same the other side slower speeds save power but take longer to get work done using more power.
Sent from my Transformer TF101 using xda app-developers app
stefan063 said:
Can someone tell me where I can find over-clock able kernel for my international One X? And what is the biggest clock speed on ONE X?
Click to expand...
Click to collapse
Go to Faux123 and read the opening post
http://forum.xda-developers.com/showthread.php?t=1647993
it will teach you about Tegra 3 variants.
Flash Faux123 latest kernel to know what variant you have.
You can have 1.5ghz quadcore minimum, except if you have the poor variant0 of the Tegra 3, and 1.6ghz quadcore max if you have variant 3
So the overclocking you can achieve depends on your Tegra 3 variant, whatever the kernel, don't trust the figures in kernel threads titles, they just give the max if you have variant 3. And the majority of people have variant 1 so limited to 1.5ghz quadcore and there's nothing to do about it, no future kernel can change the way your CPU was manufactured.
Just, SetCPU can display 1.6ghz or more, but if you have variant 0 or 1 it will never use it (CPUspy will say 1550 and 1600 are unused frequencies)
Variant 1 can go upt to 1550mhz but not for quadcore, so who cares....! Same for kernels claiming up to 1.7ghz, it's in single/dual core, so once more, who cares?
What is important is what max speed you can achieve in quadcore, nothing else, and the limits are clearly defined by your Tegra3 variant
"all chips are not created equal" was a silly bull**** invented more than one year ago as an easy answer to noobs claiming they couldn't overclock their dual core at their max. Now, on the One-X and because of Nvidia unstable quality"all chips are not created equal" is sadly the truth.
PS: wrong=> to say that overclocking means more voltage, undervolting a custom kernel a little can surprisingly reduce heat when you push your CPU to its max,I can have both 1500mhz quadcore and less voltage than stock, as well as less heat (I was surprised, really, on the Sensation I had always found undervolting kinda useless)
PPS: true=> thermal throttle will always come pretty soon and reduce your max speed......
i900frenchaddict said:
Go to Faux123 and read the opening post
http://forum.xda-developers.com/showthread.php?t=1647993
it will teach you about Tegra 3 variants.
Flash Faux123 latest kernel to know what variant you have.
You can have 1.5ghz quadcore minimum, except if you have the poor variant0 of the Tegra 3, and 1.6ghz quadcore max if you have variant 3
So the overclocking you can achieve depends on your Tegra 3 variant, whatever the kernel, don't trust the figures in kernel threads titles, they just give the max if you have variant 3. And the majority of people have variant 1 so limited to 1.5ghz quadcore and there's nothing to do about it, no future kernel can change the way your CPU was manufactured.
Just, SetCPU can display 1.6ghz or more, but if you have variant 0 or 1 it will never use it (CPUspy will say 1550 and 1600 are unused frequencies)
Variant 1 can go upt to 1550mhz but not for quadcore, so who cares....! Same for kernels claiming up to 1.7ghz, it's in single/dual core, so once more, who cares?
What is important is what max speed you can achieve in quadcore, nothing else, and the limits are clearly defined by your Tegra3 variant
"all chips are not created equal" was a silly bull**** invented more than one year ago as an easy answer to noobs claiming they couldn't overclock their dual core at their max. Now, on the One-X and because of Nvidia unstable quality"all chips are not created equal" is sadly the truth.
PS: wrong=> to say that overclocking means more voltage, undervolting a custom kernel a little can surprisingly reduce heat when you push your CPU to its max,I can have both 1500mhz quadcore and less voltage than stock, as well as less heat (I was surprised, really, on the Sensation I had always found undervolting kinda useless)
PPS: true=> thermal throttle will always come pretty soon and reduce your max speed......
Click to expand...
Click to collapse
Nice words and I just won't to add variant 1 can now go to 1.55ghz with faux 07vf I'm currently usein with the lowest most stable undervolt values and less heat than stock kernel and gameplay is amazing also on arhd 9.4
Sent from my HTC One X using xda premium
treebill said:
CPU throttle starts at 85c with thermal TJ-max of 99c.
also there is many debates about this, higher speed need more power which drains battery, but that said it means work gets faster meaning it can idle faster saving power, same the other side slower speeds save power but take longer to get work done using more power.
Sent from my Transformer TF101 using xda app-developers app
Click to expand...
Click to collapse
Your argument makes sense, but unless the governor is very efficient at controlling the CPU speed very quickly, in most cases your argument doesn’t hold true. For example when playing a game or running a CPU intensive application (where overclocking has any use) the processor works at full speed for the duration of the application.
EDIT: Frankly I don’t see any point in overclocking a phone like One X. I don’t play many games, but the few games I have played ran very smoothly. And if people are overclocking because of the (barely noticeable) laggy UI then overclocking is not a real fix anyway. Installing a custom ROM (perhaps JB), a different launcher, tweaking background apps/services are some of the more sensible and effective things to do instead.
No disrespect to the devs who are working on overclocking, but IMO HTC and nVidia must have spent a considerable amount of time and effort designing the CPU and deciding the optimal operational parameters to maximize performance while minimizing battery drain. Therefore anything out of those parameters (in theory at least) should impact either stability, or battery life. Perhaps the values HTC has decided are not the maximum possible values , because I assume they would have designed the phone to handle few exceptional conditions (i.e: extremely hot weathers). But I think over clocking would probably cause more problems in the long run than whatever the little gains you experience in short term. Just my 2c.
joewong1991 said:
Nice words and I just won't to add variant 1 can now go to 1.55ghz with faux 07vf I'm currently usein with the lowest most stable undervolt values and less heat than stock kernel and gameplay is amazing also on arhd 9.4
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
Late reply, I hope you'll read it anyway
I tried faux 007b5, so overclock free too, I had 1.55ghz indeed, but never for quadcore, just for single or dual. Sadly I wasn't able to reach 1.5ghz quadcore but 1.4
With 007u, I have 1.5ghz quadcore, but 1.55 is an unused frequency
Can you check, with tegrastats, if you reach 1.55ghz quadcore or only for 1,2 (or3??) cores?
i900frenchaddict said:
Late reply, I hope you'll read it anyway
I tried faux 007b5, so overclock free too, I had 1.55ghz indeed, but never for quadcore, just for single or dual. Sadly I wasn't able to reach 1.5ghz quadcore but 1.4
With 007u, I have 1.5ghz quadcore, but 1.55 is an unused frequency
Can you check, with tegrastats, if you reach 1.55ghz quadcore or only for 1,2 (or3??) cores?
Click to expand...
Click to collapse
I tried tegrastats and I got 1.55 4 cores for about 20 sec and then 2 shut of and then ran 2 at 1150 playin dead trigger and on cod zombies 2 cores at 1350 witch I find strange faux 0105b
Sent from my HTC One X using xda premium
Related
Hello.
My friend say that he can over clock this thing to 1.5 ghz but i don't believe him.
So what is the maximum clock speed?
800mhz and it's unstable.
Your friend is bullshitting. No way can a lower end single core be clocked that fast, it would simply just burn out.
hene193 said:
Hello.
My friend say that he can over clock this thing to 1.5 ghz but i don't believe him.
So what is the maximum clock speed?
Click to expand...
Click to collapse
+1 and A very very big lie of your friend
Sent from my HTC Wildfire S A510e using xda premium
You can't oveclock over 800 mhz. Ok maybe i lie, you can overclock over 800 mhz but it be hot like sun in core. sorry for my English
imlgl said:
800mhz and it's unstable.
Your friend is bullshitting. No way can a lower end single core be clocked that fast, it would simply just burn out.
Click to expand...
Click to collapse
Hahahahaha... Your wrong. My MARVEL is totally stable and well... read my signature
benjamingwynn said:
Hahahahaha... Your wrong. My MARVEL is totally stable and well... read my signature
Click to expand...
Click to collapse
There is absolutely no rule of thumb for overclocking.
One CPU might handle 800+ MHz (806 MHz seems to be reached by benjamingwynn - nice speed!) and other might handle only 760-780 MHz stable for example. Don't forget that overclocking isn't an exact science. It more like an art!
It depends on many variables: the batch, the place in the wafer where you CPU came from, the voltage you're pumping, the cooling provided, etc.
Some CPU's don't need much voltage in order to scale speed, others need a big voltage increase in order to handle the extra speed. And there are others that simply don't scale well and can only handle weak overclocks.
And of course there is always a theoretical limit.
Anyone who says that he/she can overclock a 600MHz CPU to 1.5GHz lies with all the teeth and is an ignorant, with all due respect.
I know no CPU in the world that can overclock to 150%. Not even with extreme cooling (Liquid Nitrogen or other Subzero solutions) and other crazy mods. Now imagine this on a small device like a smartphone, where you can't properly change the cooling of the CPU in order to cope with the extra heat generated.
The phone would most likely burn in smokes.
I know a little bit about this matter because I have experience in overclocking PC CPU's. I know most about Intel CPU's (Dual and Quad-Cores, still haven't touched a hexa-core...), cooled on air or with liquid cooling.
The PC I work with every day has a Quad-Core CPU that is 3.2 GHz stock (QX9770) and is running at 4 GHz. It can handle more but the extra heat and voltage needed isn't worth the extra speed (and the accelerated degradation of the CPU).
Sorry for the offtopic guys but I had to reply to this anecdote.
miguelca said:
There is absolutely no rule of thumb for overclocking.
One CPU might handle 800+ MHz (806 MHz seems to be reached) and other might handle only 766 MHz stable for example. Don't forget that overclocking isn't an exact science. It more like an art!
It depends on many variables: the batch, the place in the wafer where you CPU came from, the voltage you're pumping, the cooling provided, etc.
Some CPU's don't need much voltage in order to scale speed, others need a big voltage increase in order to handle the extra speed. And there are others that simply don't scale well and handle weak overclocks.
And of course there is always a theoretical limit.
Anyone who says that he/she can overclock a 600MHz CPU to 1.5GHz lies with all the teeth and is an ignorant, with all due respect.
There is no CPU in the world that can overclock to 150%. Not even with extreme cooling (Liquid Nitrogen or other Subzero solutions) and other crazy mods. Now imagine this on a small device like a smartphone, where you can't properly change the cooling of the CPU in order to cope with the extra heat generated.
The phone would most likely burn in smokes.
I know a little bit about this matter because I have experience in overclocking PC CPU's. I know most about Intel CPU's (Dual and Quad-Cores, still haven't touched a hexa-core...), cooled on air or with liquid cooling.
The PC I work with every day has a Quad-Core CPU that is 3.2 GHz stock (QX9770) and is running at 4 GHz. It can handle more but the extra heat and voltage needed isn't worth the extra speed (and the accelerated degradation of the CPU).
Sorry for the offtopic guys but I had to reply to this anecdote.
Click to expand...
Click to collapse
Totally agree.
great explanation for anyone wondering why their device won't overclock like somebody else's.
miguelca said:
There is absolutely no rule of thumb for overclocking.
One CPU might handle 800+ MHz (806 MHz seems to be reached by benjamingwynn - nice speed!) and other might handle only 760-780 MHz stable for example. Don't forget that overclocking isn't an exact science. It more like an art!
It depends on many variables: the batch, the place in the wafer where you CPU came from, the voltage you're pumping, the cooling provided, etc.
Some CPU's don't need much voltage in order to scale speed, others need a big voltage increase in order to handle the extra speed. And there are others that simply don't scale well and can only handle weak overclocks.
And of course there is always a theoretical limit.
Anyone who says that he/she can overclock a 600MHz CPU to 1.5GHz lies with all the teeth and is an ignorant, with all due respect.
I know no CPU in the world that can overclock to 150%. Not even with extreme cooling (Liquid Nitrogen or other Subzero solutions) and other crazy mods. Now imagine this on a small device like a smartphone, where you can't properly change the cooling of the CPU in order to cope with the extra heat generated.
The phone would most likely burn in smokes.
I know a little bit about this matter because I have experience in overclocking PC CPU's. I know most about Intel CPU's (Dual and Quad-Cores, still haven't touched a hexa-core...), cooled on air or with liquid cooling.
The PC I work with every day has a Quad-Core CPU that is 3.2 GHz stock (QX9770) and is running at 4 GHz. It can handle more but the extra heat and voltage needed isn't worth the extra speed (and the accelerated degradation of the CPU).
Sorry for the offtopic guys but I had to reply to this anecdote.
Click to expand...
Click to collapse
Well said. This is very off topic but how would you overclock on windows? You have to mess about with the kernel right?
Sent from my HTC Wildfire using xda premium
Normally from the BIOS.
But you can also overclock from within windows using certain applications.
BIOS is the better option.
intel007 said:
Normally from the BIOS.
But you can also overclock from within windows using certain applications.
BIOS is the better option.
Click to expand...
Click to collapse
I got a laptop and I bet you haven't seen the BIOS setup on a Sininia 510 or you would break down crying.
Sent from my HTC Wildfire using xda premium
benjamingwynn said:
I got a laptop and I bet you haven't seen the BIOS setup on a Sininia 510 or you would break down crying.
Sent from my HTC Wildfire using xda premium
Click to expand...
Click to collapse
A lot of laptops have crippled bios's so there is no overclock options mainly due to the heat/cooling factor.
Laptops run pretty hot already.
Does your laptop have any overclock/frequency Settings?
benjamingwynn said:
Well said. This is very off topic but how would you overclock on windows? You have to mess about with the kernel right?
Click to expand...
Click to collapse
All the finetuning (voltages and so on) is done in the BIOS. My motherboard is actually designed for overclocking.
It's an "old" Asus Rampage Extreme.
You would be amazed with the amount of settings it has!
It also comes with Windows software that allows some realtime adjustments but the "core" lies in the BIOS.
Sent from my HTC Wildfire S A510e using XDA App
wildfire-chaos said:
You can't oveclock over 800 mhz. Ok maybe i lie, you can overclock over 800 mhz but it be hot like sun in core. sorry for my English
Click to expand...
Click to collapse
806 here and never frozen once in months...Runs cool too. Once of the lucky ones I guess.
Yep I'm in the 806 club too.
intel007 said:
Yep I'm in the 806 club too.
Click to expand...
Click to collapse
Mine also runes ok with 806 setting
miguelca i'am on 1055t oc'ed to 3.9 24h...(hyper 212+ push-pull)
I'm running on 768 and it is fast enough. You can feel that the device gets warmer with 806 and needs a bit more battery.
aigaming said:
Mine also runes ok with 806 setting
miguelca i'am on 1055t oc'ed to 3.9 24h...(hyper 212+ push-pull)
Click to expand...
Click to collapse
Nice OC aigaming! but never forget that CPU's do degrade over time, even if some people tell you the contrary.
If you keep your CPU cool and don't give it too much voltage to "eat", then everything should be fine for a long time. Still don't abuse it too much, this is my personal advice.
You have a nice cooler and with a push pull config it should keep things cool.
Mine is an old Tuniq Tower 120 (copper block lapped by me when I still had lots of patience) with the stock fan changed. I don't use the fan controller that came with the cooler btw.
My CPU used to be cooled on liquid but I have a way too limited case in order to accomodate the radiators, pump, reservatory, etc. Sold all the gear.
Keeping my beast at 4GHz on air is VERY NICE.
Once again sorry for the offtopic guys. I had to reply to this. I know I could have used a PM but I'm in a hurry.
I wish the HTC 2.3.5 RUU would have a kernel with overclock option for the CPU...
Anyone available to change the HTC RUU with an overclockable kernel?
Or am I saying nonsense? Probably CRC check would fail and I could only flash it with temp-root, right?
Would really appreciate being able to push my CPU just a little bit more...
The only single-cores I know of that can actually reach 1.5Ghz overclocked are devices running a Qualcomm MSM7x30 (Desire Z) or an MSM8255 (Desire HD/Xperia Play/Sensation XL [stock speed, same processor]/etc).
is it possible to overclock above 768mhz? my phone never gets warm and battery lasts 2+ days, completely stable at this speed, i want to learn how i can edit a kernel and increase the cpu voltage ever so slightly and increase max cpu clock and see whats stable, could you help me?
i think you will just start to get kernel panics if you try to go much higher .
i have another phone (lg 500) also with the same arm6 cpu that comes clocked at 600 from factory. i have the option to oc to 825 with custom kernel but it always panics at 806 and is stable at 787.
So i think if you want a faster phone go buy one
massigann said:
i have another phone (lg 500) also with the same arm6 cpu that comes clocked
Click to expand...
Click to collapse
Nope.
P500 has an ARM11 MS7227 processor
Wildfire has an ARM11 MS7225 processor.
http://xi0.info/qualcomm-chips-kernel-arm-phones_7000.html
lol the chipset for the wildfire is MSM7225 but the cpu is arm6/11? on half of the sites is arm6 the other arm11..
Hi I have mine set to 710 and any higher starts getting random reboots.
But overclocking any higher than 768, your risking a chip melt or definitely shorting its life.
I got a little problem:
I can overclock my wildfire to only 710 Mhz if i overclock it to 768 the phone stucks and i can't do anything.
At the moment I'm using Cyanogenmod 9 but i think it isn't because of the ROM 'cause in Rempuzzle ROM i had this bug too.
Should i flash another Kernel or what should i do?
As far as I know, it's a hardware limitation.
It depends on the processor, some processors have high tolerance to overclocking, some don't.
In another words, some processors can handle high speeds. The defualt speed is actually 512-ish so when you increase to 768, it just can't handle the speed so the phone freezes/reboots.
Some wildfires can handle those speeds, luckily mine does
That doesn't mean you have bad or faulty hardware. The processor just can't handle it
Correct me if I'm wrong .
Sent from my HTC Wildfire using Tapatalk 2
I think from my new experience it might be a bit of a combo between the actual chip and the kernel settings, on my s2 with 1 kernel I can only oc to 1300 with both cores on but with another (my favorite one anyway) I can hit 1500 both cores on.
I still think the actual processor has more input than the kernel though, and all the extra strain from not having a gpu can't help either.
EDIT: I'm not saying flashing a new kernel will help you reach 768 though , the lack of resources elsewhere is a huge hinderence to the wildfire.
Sent from my GT-I9100 using xda premium
anyone got this overclocked
mox123 said:
anyone got this overclocked
Click to expand...
Click to collapse
And instantly overheated? :cyclops:
Yes .
Sent from my HTC One X using Tapatalk 2
Gpu overclock would be more useful than CPU.
Sent from my HTC One X using xda app-developers app
treebill said:
Gpu overclock would be more useful than CPU.
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
ok gpu overclock then?
I would overclock my HOX...in a block of ice. Or...well, in real life i dont want to overclock it because it would smoke out in my hand
Overheating is a big problem even without overclocking, imagine it running on 1,6ghz...
Sent from my Renovated HTC One X using Tapatalk 2
Can't really see why you would want to overclock the One X, the phone is blazing fast anyway, 4 cores at 1.5 is enough..
But like everybody else said, the phone would probably burn up..
I wouldnt overclock my device - at least not at the stage we reached now.
Why?
a) As long as there is no way to lower the voltage this might toast your device - its a unibody, keep that in mind!
b) 100 MHZ more would have literally no effect - its a 6 GHZ device, even if you boost it up to 6,4 - you wont notice, it will just drain your battery.
6 GHZ is WAY enough...this is smartphone...I mean...seriously...its got more power than my 4 years old 1K €uro notebook...
Illux said:
I wouldnt overclock my device - at least not at the stage we reached now.
Why?
a) As long as there is no way to lower the voltage this might toast your device - its a unibody, keep that in mind!
b) 100 MHZ more would have literally no effect - its a 6 GHZ device, even if you boost it up to 6,4 - you wont notice, it will just drain your battery.
6 GHZ is WAY enough...this is smartphone...I mean...seriously...its got more power than my 4 years old 1K €uro notebook...
Click to expand...
Click to collapse
well first of all you can't just multiply the frequency by the number of cores. I'd much prefer an actual 6Ghz single core processor over 4x1.5Ghz because it won't have any compatibility and efficiency issues. Assuming they are of the same architecture and power usage of course.
Also the ARM low power SOCs probably don't have comparable number of commands per clock cycle as an x86 high performance CPU, even if it's 4 years old.
jacobgong said:
well first of all you can't just multiply the frequency by the number of cores. I'd much prefer an actual 6Ghz single core processor over 4x1.5Ghz because it won't have any compatibility and efficiency issues. Assuming they are of the same architecture and power usage of course.
Also the ARM low power SOCs probably don't have comparable number of commands per clock cycle as an x86 high performance CPU, even if it's 4 years old.
Click to expand...
Click to collapse
i agree.. when the multi-core CPUs first came out intel said doubling the core number would give as 47% boost in total performance (not x2 like apple says as they do not know it) lets assume that to be %50 to make the math a little bit easier..
so basically we can make the math here as; 4 cores at 1.2Ghz (when the all 4 active the clock is 1.2Ghz) gives us 1.2 x 3/2 x 3/2= 2.7 Ghz single core performance.. this value for SGS3 is; 1.4 x 3/2 x 3/2= 3.15Ghz
and here we can say dual core at (X) Ghz gives us (X) x 3/2=2.7 thus the (X) = 1.8 Ghz.. so, if you overclock any arm9 based Dual CPU to 1.8 Ghz you get the same performance "on paper".. if you want to catch up with SGS3 we need to OC it to 2.1 Ghz which is impossible at the moment i guess..
what makes the difference here is the lower loads or multiple loads on the CPU.. corecontrol users probably would have noticed; sometimes when the all 4 core are active the clock is only 480 or 640 Mhz (even 320 sometimes if i remember correctly) .. the same amount of load could be taken care of by a dual core at about 720 or 960Mhz.. but here the quad core system stays cooler with a little less energy consumed (or wasted) (as long as all the cores are in one uni-body structure, putting 2 or 4 single cores phsically together is not the case for our smartphones) this is how apple made sure about the smoothness of the ipad 2, new ipad and the iphone 4s.. they used lower clocked 2 power vr 543 GPUs.. when the load is little they can clock down to very low speeds and share the load..
and also you can always find an emtpy core waiting for new task when the others are busy..
so, long story for short; if we were dealing with a little amount but hard processes, having a single core at 2.7Ghz would be good since the quad core design would not cut one task into 4 pieces... as long as we were not thinking about the battery life and the heat.. but since we are dealing with lots of tasks which all could be handled by 1.2Ghz power having 4 cores is better for battery saving and having an empty core for a new task to run parallel with the other running tasks in the background..
It is OC out of the box I think Nvidia OC them for us and it's already pushing itself at the very edge of what is possible for it to do based on temperature, I seem to remember Hamdir saying something along those lines once upon a time...
Why bother to OC it's fast enough as it is.
---EDIT---
hamdir said:
only faux kernel betas allow OC
big warning OC is bad for the HOX given the thermal envelope
you are risking both you battery and processor if you OC
i know you are used to OC from other devices but those had headroom, it is not the case this time, T3 is operating at its max thermal capabilities on the HOX
Click to expand...
Click to collapse
hamdir said:
the snapdragon 2 on the Arc had a lot of headroom
the chipset is rated @ 1.5ghz stable!
not the case with T3 its milking the very maximum of the 40nm process
in other words Nvidia is OCing its T3 out of box because their chips are designed to survive massive amount of heat (sadly it doesnt mean the battery or other components would survive)
it is already Overclocked lol
sometimes you have to listen to the "science" of it and surrender
Click to expand...
Click to collapse
According to HTC website, the SnapDragon 810 in the M9 is supposed to be clocked at 4x 2GHz cores, 4x 1.5GHz cores.
Both CPU Stats and CPU-Z report a max speed of 1.5GHz...
Are we being sold underclocked devices?
I know about the supposed "thermal issues" but to advertise a device at 2GHz but ship it at 1.5Ghz is a bit naughty.
Can anyone confirm their device is running at 2GHz?
TIA
Aaron
Screenshots?
---------- Post added at 02:23 PM ---------- Previous post was at 02:22 PM ----------
Or better yet, how about a video? I'm little weary because of all the crapsung trolls in these forums.
superchilpil said:
Screenshots?
---------- Post added at 02:23 PM ---------- Previous post was at 02:22 PM ----------
Or better yet, how about a video? I'm little weary because of all the crapsung trolls in these forums.
Click to expand...
Click to collapse
No video, don't worry, I'm not a troll - just look at *all* of my previous posts, all in HTC Wizard/Kaiser/Desire/One X forums, along with Asus TF300T.
Well I hope that isn't true, for HTC's sake. If it is true then that means this phone did in fact overheat..
superchilpil said:
Well I hope that isn't true, for HTC's sake. If it is true then that means this phone did in fact overheat..
Click to expand...
Click to collapse
Indeed, that's why I want to know if others have devices running at 2GHz and this is just an error in these apps. But, if they are clocking at 1.5, they shouldn't be advertising it as being 2 on their website and everywhere else.
Reading around it is in fact advertised as 1.5 GHz
superchilpil said:
Reading around it is in fact advertised as 1.5 GHz
Click to expand...
Click to collapse
Snapshot from HTC UK this afternoon - note the timestamp on my screengrab...
4x2.0 and 4x1.5
So 4 at 2ghz and 4 at 1.5ghz.
In assuming the app is only measuring the max of a few cores and assuming the rest are the same.
Put the phone in performance mode and look at the speed of each core to see where they are set
I get mine tomorrow, I'm definitely going to check.
superchilpil said:
4x2.0 and 4x1.5
So 4 at 2ghz and 4 at 1.5ghz.
In assuming the app is only measuring the max of a few cores and assuming the rest are the same.
Put the phone in performance mode and look at the speed of each core to see where they are set
I get mine tomorrow, I'm definitely going to check.
Click to expand...
Click to collapse
Good spot, installed Antutu and it recognises max speed of 1.9584GHz so it does look like it's not underclocked.
Running benchmark now - done, and it didn't get hot
" The new phone has a processor that’s theoretically faster, a higher-resolution camera, and other things that should make the new phone an upgrade from last year’s model. But early reviews suggest the new camera doesn’t take stellar photos, the battery life isn’t great, and in order to keep the CPU from overheating HTC recently pushed out a software update that reduces the clock speed… which means the new phone’s probably not much faster than last year’s model. "
http://liliputing.com/2015/03/htc-one-m9-pre-orders-open-march-27-649-unlocked.html
OK all. I've cleaned up the thread to remove the off topic bickering and left only posts that are relevant to the discussion based on the title and the OP.
Let's keep it civil and on topic please.
Thanks,
coal686
Forum Moderator
Mine is a tad slow playing Football Manager Handheld 2015 which is much quicker on the Note 4 and M8. I think this may well be due to tinkering on HTC's part as during the game the phone is quite cool, but doing other tasks it gets quite hot.
I call shenanigans on HTC's part.
Jonathan-H said:
Mine is a tad slow playing Football Manager Handheld 2015 which is much quicker on the Note 4 and M8. I think this may well be due to tinkering on HTC's part as during the game the phone is quite cool, but doing other tasks it gets quite hot.
I call shenanigans on HTC's part.
Click to expand...
Click to collapse
Understand that both of those other phones have 32 bit processor's, most apps are probably not optimized for 64bit. So that may be why that app is slower.
And yes you can be quite sure this phone has a thermal throttle, but don't be mistaken. So does every other phone out there.
/sys/bus/cpu/devices/cpu*/cpufreq
CPU's 0-3 cpuinfo_max_freq = 1555200
CPU's 4-7 cpuinfo_max_freq = 1958400
All that was tweaked is the interactive governor, it was too aggressive, none of the core clock speeds have been reduced
LeeDroid said:
/sys/bus/cpu/devices/cpu*/cpufreq
CPU's 0-3 cpuinfo_max_freq = 1555200
CPU's 4-7 cpuinfo_max_freq = 1958400
All that was tweaked is the interactive governor, it was too aggressive, none of the core clock speeds have been reduced
Click to expand...
Click to collapse
@LeeDroid which cluster is 2ghz the A57 or A53?
in power saver mode the 1.5ghz cluster minimum reduces from 600mhz to 300mhz and the 2ghz cluster gets disabled, but i dont know which of which
hamdir said:
@LeeDroid which cluster is 2ghz the A57 or A53?
Click to expand...
Click to collapse
That's the A57 mate.
None of the CPU stats Apps on the market offer support For octacore as yet, they will see that we have 8 cores but won't be looking at them directly
LeeDroid said:
That's the A57 mate.
None of the CPU stats Apps on the market offer support For octacore as yet, they will see that we have 8 cores but won't be looking at them directly
Click to expand...
Click to collapse
in power saver mode the 1.5ghz cluster minimum reduces from 600mhz to 300mhz and the 2ghz cluster gets disabled, so according to this information the A57 cluster gets disabled completely in powersaver! the slow down is very evident in the camera
Nomal mode:
633mhz to 1958mhz
first 4 cores A53 cluster hover around it's maximum 1555mhz (capped)
second 4 cores A57 cluster around 700mhz idle, it goes all the way up to 1958mhz
CPU powersaver:
300mhz to 1552mhz
first 4 cores cluster A53 hover around it's maximum 1555mhz (capped)
second 4 cores A57 cluster disabled
GPU Adreno 430 speed between 190mhz and 600mhz, not affected by CPU powersaver, drivers [email protected] ([email protected])
when the device is warm (downloading non stop over wifi) battery temp around 39c, a little less load and the battery temp is around 36c
hamdir said:
in power saver mode the 1.5ghz cluster minimum reduces from 600mhz to 300mhz and the 2ghz cluster gets disabled, so according to this information the A57 cluster gets disabled completely in powersaver! the slow down is very evident in the camera
Click to expand...
Click to collapse
Yeh that would make sense mate, dropping min freq on the a57 would likely cause freezing, power save bumps us down to a good old 1.5GHz QuadCore, camera is Damn resource hungry so the imminent slow down would also make sense.
LeeDroid said:
Yeh that would make sense mate, dropping min freq on the a57 would likely cause freezing, power save bumps us down to a good old 1.5GHz QuadCore, camera is Damn resource hungry so the imminent slow down would also make sense.
Click to expand...
Click to collapse
how does 1.5ghz quad A53 compare to a 1.1ghz quad Krait400? if we are comparing powersavers M8 vs M9
also some correction:
LeeDroid said:
All that was tweaked is the interactive governor, it was too aggressive, none of the core clock speeds have been reduced
Click to expand...
Click to collapse
that's not true, they also added thermal throttle to the GPU, all the way from 600mhz to 300mhz which also brings it down to M8 land (once throttled)
Ah indeed!
Hadn't considered the throttling, I don't tend to use power save a great deal however happy to do some comparisons when I have time