Hello,
I have fire tv Cube with this Errors:
- after start no possible to connect over LAN and WIFi,
Setup always ask for connection on Wifi or Lan and after connection is established, it shows Error that cable need to be re-pluged .
I tried using all posible connection and routers.
Issue Solution from this Forum and http://forums.ouya.tv/discussion/1380/recovery-mode didn't work.
I need to enter to recovery mode for this model.I alredy have USB Cable for Computer.
Keyboard Kombination alt+i+prn.screen doesn't work.
Kombination using Mute and Volume down works, but only for safe mode.On Safe Mode i have no Recovery option.
How can i enter to recovery mode to install another software from my Windows computer.
I already instlled aftv-unlock and Usb Drivers but i can't connect to de device because ADB Interface isn't awailable on Computer Device manager.
i need link for new Software for this Model:
Can anyone help me.
Thank you and best regards.
Related
Hi,
I seem to be stuck on a silly problem. I don't seem to be able connect to my pc via usb.
It charges and I've got kies installed but I can't find where on the phone to change usb connection mode.
I'm running gingerice.
Any help
tmcthree said:
Hi,
I seem to be stuck on a silly problem. I don't seem to be able connect to my pc via usb.
It charges and I've got kies installed but I can't find where on the phone to change usb connection mode.
I'm running gingerice.
Any help
Click to expand...
Click to collapse
For USB Storage mode:
1. Disconnect
2. Settings->Wireless and network->USB utilities
3. Click button: Connect storage to PC
4. Plug in USB Cable
I hope it helps.
tmcthree said:
Hi,
I seem to be stuck on a silly problem. I don't seem to be able connect to my pc via usb.
It charges and I've got kies installed but I can't find where on the phone to change usb connection mode.
I'm running gingerice.
Any help
Click to expand...
Click to collapse
Do you mean adb connection or usb mass storage one?
I don't know whether you've checked this yet, but try this:
if you mean the adb, on the home screen, press: menu>setting>applications>development>check on usb debugging
if it is usb storage, refer to what mayerkemp said
or if you can see usb logo on notification bar, slide it down and tap connect storage to pc
Thanks guys,
Problem is that when I click on connect storage it either says "connect the cable to use mass storage" or if the cable is connected it says "USB is connected. Remove the cable."
Any thoughts?
Hi guy's, so I've reinstalled a backed up rom and it's fine now.
Just always check development mode on application setting, then u can change to usb storage with tap usb connected from expanded status bar, that's what I do on DXLM3
Sorry for my bad english
I have a Galaxy Note 8 that I would like to root.
I have downloaded and installed the latest Samsung drivers on my PC, and can connect the tablet via USB to my computer with no problem. I can browse the tablet via the computer etc. (Windows 7)
Problem: I fire up Odin mode on my tablet and put it into download mode. (I have USB debugging enabled.)
I fire up Odin 3.07 on my PC and plug in the USB cable.
I have no connection between the tablet and the PC under any conditions when the tablet is in Odin download mode.
Any suggestions?
Thanks in advance.
dal71 said:
I have a Galaxy Note 8 that I would like to root.
I have downloaded and installed the latest Samsung drivers on my PC, and can connect the tablet via USB to my computer with no problem. I can browse the tablet via the computer etc. (Windows 7)
Problem: I fire up Odin mode on my tablet and put it into download mode. (I have USB debugging enabled.)
I fire up Odin 3.07 on my PC and plug in the USB cable.
I have no connection between the tablet and the PC under any conditions when the tablet is in Odin download mode.
Any suggestions?
Thanks in advance.
Click to expand...
Click to collapse
Tried Starting Odin as Administrator?
You may need to install the samsung usb drivers. There is a difference between connecting your tablet to your computer and windows reading it as an MTP device, and connecting it in download mode which the computer sees differently and will need drivers for it. You can find them on the Samsung support site in the download section.
I dont want to bury this in my other post.
Has anyone managed to update the box firmware via the recovery console (USB keyboard alt prnt scn i method)..
My box is stuck in a loop of old firmware that insists on an update before it will boot and outside the USA where they wont give an update to. Catch 22.
Phat Phreddy said:
I dont want to bury this in my other post.
Has anyone managed to update the box firmware via the recovery console (USB keyboard alt prnt scn i method)..
My box is stuck in a loop of old firmware that insists on an update before it will boot and outside the USA where they wont give an update to. Catch 22.
Click to expand...
Click to collapse
To my knowledge, ADB is disabled in stock recovery. And furthermore, USB peripheral mode is disabled in the kernel. Therefore I know of know way to do anything useful with stock recovery.
Phat Phreddy said:
I dont want to bury this in my other post.
Has anyone managed to update the box firmware via the recovery console (USB keyboard alt prnt scn i method)..
My box is stuck in a loop of old firmware that insists on an update before it will boot and outside the USA where they wont give an update to. Catch 22.
Click to expand...
Click to collapse
Have you tried to set up a VPN and see if that can help?
I could VPN with my PC..
How can I set up a VPN with only a box that wont boot and a dumb router ??
Phat Phreddy said:
I could VPN with my PC..
How can I set up a VPN with only a box that wont boot and a dumb router ??
Click to expand...
Click to collapse
If your PC has two network connections (e.g., wifi and ethernet), you can connect to the internet via VPN with one connection interface, and set the other to share your PC's connection and connect the Fire TV. For example, setup a VPN connection via Wifi on your PC, then connect the Fire TV to your PC via ethernet, and set your PC to share your wifi connection over its ethernet port.
AFTVnews.com said:
If your PC has two network connections (e.g., wifi and ethernet), you can connect to the internet via VPN with one connection interface, and set the other to share your PC's connection and connect the Fire TV. For example, setup a VPN connection via Wifi on your PC, then connect the Fire TV to your PC via ethernet, and set your PC to share your wifi connection over its ethernet port.
Click to expand...
Click to collapse
OK my PC doesnt have 2 nics.. I guess I have to go buy a wifi card..
Hi
I have a Sony Xperia Z 5 Premium dual e6833 model. a few days ago after about one month when i try to connect a usb flash via otg cable the usb not detected. I think after update to Android 6.0 (ota update) this problem has occured.then I download the 6.0 stock rom to flash via flash tools that i found phone can't connect to pc. Flash tools and Xperia companion can't recognize the phone however driver's installed.but Flash tools can detect phone in flashmode and fastbootmode. I flashed the 6.0 buildnumber 185 whit full wipe. But the problem not solved. Then 6.0 buildnumber 163. Then 6.0.1 buildnumber 224. Then 5.0 buildnumber 170 and all these fladhed whit full wipe. But the problem still not solved.
By the way... When I try to connect the phone to pc via usb cable it's not detecte by pc and no reaction in pc and phone. But when i turned off the phone and connect the phone to pc via usb cable and then turn on the phone Xperia companion and flash tools can recognize the phone and the pop up notification for selecting connection mode is shown in notification bar. But flash tools recognize the phone whit usb debugging off however the usb debugging is on and unknown source is active in setting.
In this situation if disconnect the phone and try to reconnect it the same problem is occured.
I tried to change the settings usb connection from setting - developer options- select usb configuration but the problem still not solved.
Please help me
Did you select the type of usb but connection on the phone? In 6.0 it gives you the various options such as charge only or mtp connection.
Robobob1221 said:
Did you select the type of usb but connection on the phone? In 6.0 it gives you the various options such as charge only or mtp connection.
Click to expand...
Click to collapse
pop up message that allow you to select the usb connection is not shown in phone. Only when I turn off the phone and connect the phone to pc via usb cable and then turn on the phone this option is shown in notification bar and everything is ok. If i disconnect the phone and try to reconnect it again the same problem is occured.
By the way usb device can't detect. When I push detect the usb device after a few minutes failure message is shown.
mizanlo said:
pop up message that allow you to select the usb connection is not shown in phone. Only when I turn off the phone and connect the phone to pc via usb cable and then turn on the phone this option is shown in notification bar and everything is ok. If i disconnect the phone and try to reconnect it again the same problem is occured.
By the way usb device can't detect. When I push detect the usb device after a few minutes failure message is shown.
Click to expand...
Click to collapse
Uninstall the usb driver on pc, forget device connection on phone, and reinstall driver via the pc companion
Sent from my iPad using Tapatalk
Hi, for the otg connection there is a quick setting. I think sony found this solution to avoid problems with the open micro usb port and the IP67 certification. Try to connect a USB key to the phone and press the search usb quick setting, worked for me!
Sent from my E6853 using XDA-Developers mobile app
bj4ever said:
Hi, for the otg connection there is a quick setting. I think sony found this solution to avoid problems with the open micro usb port and the IP67 certification. Try to connect a USB key to the phone and press the search usb quick setting, worked for me!
Click to expand...
Click to collapse
Where is this quick setting? Do you mean the detect usb device button in notification bar?
mizanlo said:
Where is this quick setting? Do you mean the detect usb device button in notification bar?
Click to expand...
Click to collapse
Yes, the detect usb device button in the notification bar
Sent from my E6853 using XDA-Developers mobile app
I received this from a friend because it was bricked after an update ran against its custom ROM.
I have tried everything to restore it, but nothing seems to work. It starts up but only gets to the Amazon TV logo and just sits there. Here's what I have tried so far:
1. I connected it to my laptop via an A-A Male-Male USB cable, but my PC doesn't see it so I can't push anything to it via ADB.
2. I connected it to my network, but it doesn't pull an IP address so I can't push anything to it via ADBLink.
3. I tried using the remote to force a factory reset using back arrow and right, but it doesn't see the remote so that doesn't work either.
4. I connected a USB keyboard to it and used Alt+PrtScn+i to force it into recovery mode, but it only display a system recovery screen and doesn't give me any options and doesn't do anything when I press the "Home" key.
Any advice on restoring this Fire TV would be GREATLY appreciated:laugh: