Using Voice to text with Messages text app - annoying problem - Samsung Galaxy S20 / S20+ / S20 Ultra Questions &

Samsung Galaxy S20
Messages App
Microsoft Swiftkey keyboard
I just got this Galaxy S20. On my previous phone (Galaxy S9), when I hit the little "microphone" button on my SwiftKey keyboard to do voice to text when using the Messages App for texting, I would simply start talking and the words I was creating by voice would populate the text field in Messages. I could easily see the words as I spoke. After I was done taking, I'd just hit the send button and I was good to go.
With this S20, when I hit the little microphone button, the window pictured below (left image) pops up. It is super annoying for a few reasons. One, that stupid grey box that says "Your audio Will be sent....." blocks the first several words that I am speaking, so I can't see that the text to words is translating correctly. Second, if I stop talking for around a second, the voice to text assumes I'm done speaking and closes, preventing me from adding more words if I hesitate to complete a thought. Third and worst of all, after I'm done talking the words I just spoke don't transfer to the text field in Messages. If I tap the empty text field in messages, SOMETIMES the words I just spoke suddenly appear in the text field- maybe 50% of the time. Supper annoying as half the time I have to repeat the whole voice-to-text process or revert to typing.
On my S9, when I hit the microphone button, I got a pop-up as shown in the second picture (bottom right), and my words simply transferred directly to the text field in Messages, where I could clearly see them and simply hit "send" when done speaking.
When I use Facebook Messenger and do voice-to-text, I still get the pop up box with the annoying grey "Your audio will be sent......" blocking my words, but when I'm done speaking, at least my words transfer into the empty text box automatically and edit/send as required.
Anyway, tried getting this answered on another Android forum to no avail. I hear the posters on here are much smarter : )
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Related

TERMINATOR 4: SALVATION - a new notification style

Just inspirated by the first trailer of T4
www.terminatorsalvation.com
(btw: who's afraid the next movie? ;-) )
I've made a new notification of message.
It covers and manipulates of whole screen of any Windows Mobile device
(PPC or Smartphone), no matter what is on the screen,
at the moment when the new message received.
I like the idea of this trailer, when title music and video frames, try to break our normally wathed screen.
It's fun to have something similar in personal computer. To have some spice in mobile device.
Of course, if we aren't afraid, this will happen in the future. For real.
So, this notification replaces the default notification of message,
in a style of the above T4 trailer.
Several screen deformations and manipulations are built-in.
Below screenshots are samples only.
In reality, the smooth animation of visual effect is playing,
together with the title sounds (music).
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It plays a sound, only when your Profile allows you, and the alerts volume is more than zero.
Functions:
You can switch directly from this notification to reply to the Sender of message: UP/DOWN KEY or TAP-MOVE vertically.
You can switch directly from this notification to the Inbox: LEFT/RIGHT KEY or TAP-MOVE horizontally.
You can play the notification again: ACTION.
To close this notification: ANY OTHERS buttons, or just tap on the screen anywhere.
Because of Warnerbros. copyright, I realized this version as freeware.
And I have no deal with them.
Another way, I think this is a good example,
how the advertising could be positioned (placed) into mobile devices, without users action needs.
This program (notification) user installs on your device, and that's all.
There is no settings, no user-enable application, no dialog, nothing to use.
Then user will not see any icon or running program.
It displays on the screen, and become enabled, only when new message is incoming.
Imagine, the top content of this notification could be downloaded from some network server,
and automatically. What I have not included in this version.

			
				

			
				
Finally, it displays the last received message (scrolled up from the bottom of screen).
In the background, it displays (some time) a Sender photo, if it's found in your Contacts.
The above screenshot is just a sample, you will see there some photo from your Contact.
And the text of message will scroll up from the bottom of screen, till a whole message will display.
Eeee... freeware files:
http://www.jgui.net/t4.notification/T4.NOTIFICATION.SETUP.exe
http://www.jgui.net/t4.notification/T4.NOTIFICATION.SETUP.cab
(please do not copy theses files, only link to these url if you want)
Due to reason of notification, it's recommended to install in main memory.
This is alpha version, I just tested in a few devices a week only.
I don't know if everything is fixed there now. Please try.
Uninstaller is included.
You cannot just break this notification. You have to unistall.

[Q] HTC People - Address not fully visible

The misses has just received here DHD and found that the standard HTC People manager only shows the address in a small scrollable field and it's really awkward to see the full address at a glance.
Does anyone have any ideas how to make the address easily visible?
Or an alternative contact manager app?
I'll post screen shots later if it'll help.
I had a quick surf earlier and couldn't find any info that was helpful...
So we can view a complete contract address, does anyone know how to get the standard Contact viewer to replace HTC's?
HTC Contact Address is truncated on a single line e.g.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Android Contact Address is shown over several lines e.g.
Excuse the pic's, they're for illustration purposes only.
I had the same problem with my last phone - a Nokia E71. You had to hit 'edit' to view the address in a seperate window. A pain in the posterior! And, like you, I've noticed that the HTC People app does the same thing. So you can either a) use the 'edit' mode or b) tap the address, it comes up on Google maps, tap the flag and then the full address pops up. Doh ....
Thing is, with the more basic Nokias, and I've just checked with the wife's 2730 Classic, you can use the 'View' option to look at the complete address. If the address was so long it wouldn't fit on one screen then you just scroll down. Simples! Now, how can Android do the same?
Dave
Same problem with birthday... Can't see the year until you edit it, annoying
OK. Been looking into this as I was getting a bit hacked off with it. Something so basic .... Anyhow, downloaded 'AddressBook for Android 2' and at first it looked quite good but soon noticed it had no 'comapny' field ... But you could view the complete address in a single window.
Then tried Youlu. Now this seems to meet all my needs (at present anyway!). It gives all the same info as the 'people' app but when you choose the address you get ..... the full postal address!!!! Only then, if you tap the address you get Google maps showing where it is.
HTH
Dave
Thanks for the suggestions, although I don't see many favourable reviews for Youlu - how have you found it?
I sent this issue to HTC a few weeks back. Maybe if more of us do the same they may consider addressing it (if you'll pardon the pun) in a future update.
I'm getting a little fed-up with having to consider using 3rd party apps to replace basic functionality. I'm using Handcent because Sense SMS is broken, the Sense calendar is full of holes and doesn't include tasks, so I'm looking for a replacement... And contacts (which is otherwise ok) doesn't show complete addresses!

[Q] [App Request] Text Response Overlay? (MIUI style?)

Basically I'm looking for an app that works the way MIUI handles receiving a new message. For those who don't know it goes as follows:
Instead of just displaying an icon notification MIUI actually visually shows you the entire message with the text box underneath, tapping the text box makes my keyboard come up allowing me to respond immediately all while still seeing what was happening prior to the text coming in the background. Once i hit send the message goes away and i'm back to whatever i was doing. (even though i never left and could see it the whole time)
Whats so great about this?
I don't have to pull down the notification tab, select the message, wait for it to open, respond, then hit back until hopefully back to where i left off.
Its all done over top of what i was doing seamlessly.
Is there an app like this for when i may want to try something other then MIUI? If not, someone needs to really make this.
EDIT :
great suggestions given and listed below.
SMS Popup
standard messaging app, with popup
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Link -SMS Popup
Go SMS Pro
complete messaging replacement, with popup
Link - Go SMS Pro
Handcent SMS
complete messaging replacement, with popup
Link - Handcent Sms
Go SMS Pro
had it for a bit, it would display a pop up notification, but when i hit reply it would take me to go sms messaging app and out of what i was doing. Once i was done with sending the message i'd still have to exit out of the convo thread and the messaging app itself to get back to where i was.
Not quite what i'm looking for.
SMS popup
Sent from my SGH-T959 using XDA Premium App
Handcent SMS.
kylecore said:
had it for a bit, it would display a pop up notification, but when i hit reply it would take me to go sms messaging app and out of what i was doing. Once i was done with sending the message i'd still have to exit out of the convo thread and the messaging app itself to get back to where i was.
Not quite what i'm looking for.
Click to expand...
Click to collapse
I use this the way you described in the OP. I answer directly in the popup, and hitting "Send" just sends the message, and closes the popup. Unless I've received multiple messages in which case I can answer them all one by one. I can also scroll this popup to read the individual messages. I urge you to try again.
thanks for all the suggestions guys!
although i would like to continue using the standard messaging app and not move to a new one.
Regardless i will update the first post with links to your suggestions

Dialer Search like Vanilla Android

So...wife just got this phone and loves it except that the phone doesn't search all contacts when using the search function in the dialer. It only searches the contacts that were chosen to be displayed.
On vanilla android...the search will include all contacts including the ones that are not selected to be displayed.
Is there an option to get this working or is that the way Samsung wanted it?
She doesn't like Rocket Dialer...
Swyped from my Nexus One
SiNJiN76 said:
So...wife just got this phone and loves it except that the phone doesn't search all contacts when using the search function in the dialer. It only searches the contacts that were chosen to be displayed.
On vanilla android...the search will include all contacts including the ones that are not selected to be displayed.
Is there an option to get this working or is that the way Samsung wanted it?
She doesn't like Rocket Dialer...
Swyped from my Nexus One
Click to expand...
Click to collapse
on mine it will show all contacts, just have to select arrow down option that shows all available contacts within that number
Okay...I'll check again...
But, this is what I'm doing...
She has groups...she selects friends and family groups to be displayed. She is typing in the name of a business that she has under the group business...The phone says no contact found...even when pressing the search all contacts button.
But, I'll double check about the arrow when she gets home. Thanks.
Sent from my Transformer TF101
Nah...no such arrow. Seems that this phone doesn't search all contacts when you ask it to. Weird... why even put that option there if it's not going to work...since while you type...it's searching all contacts selected to be displayed.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
In the attached screen shot is the arrow i'm referring to..I hit
2 and basically once I press it, it gives me every contract that name starts with a, b, and C.
Sent from my SGH-T989 using XDA App
Okay. No arrow for me. But I think maybe we're not on the same page...I probably wasn't very clear.
I have contact groups A, B, C. I only want to display A & B on the phone....so those are the only ones I have checked in the display option.
On Vanilla android dialer....if I'm searching for a contact on group C...I hit the search all contacts button (after the phone tells me that there is no such contact within the current group chosen to be displayed)...and it goes and searches through group C and finds that contact.
On this phone...when I do that...it does not search group C. It just searches group A & B only.
But, I'll check again tonight...because I am getting old......but, I'm pretty sure this phone's dialer doesn't do it.
Do you know if I can just extract the phone apk from vanilla and use that instead?

GW Active 2 (SM-R820) Notification behavior

Hi coming to Galaxy Watch afte more-than- 6 years on wear os and i totaly dislike notification behavior.
On WearOS i used to have the chance to get the notification always visible on screen until i dismiss it. Here i can only see a notification dot if there are unread notifications. Is there a workaround to keep the notification always visible like on wear os?
Another annoying behavior is that ifi get more than a notification from the same app but different title ( messages from more whattsupp contacts or more than a mail) in the notifications pane GW shows only the last message and a number with the other contacts. in andorid wear (but meany other whatches has the seam behavior) i see all the messages if they are from the same contact. If more than a contact wrote, i see the very last message of each contact, and not grouped by app. Is there a way to change this?
thans inadvance
IL_DEMONICO said:
Hi coming to Galaxy Watch afte more-than- 6 years on wear os and i totaly dislike notification behavior.
On WearOS i used to have the chance to get the notification always visible on screen until i dismiss it. Here i can only see a notification dot if there are unread notifications. Is there a workaround to keep the notification always visible like on wear os?
Another annoying behavior is that ifi get more than a notification from the same app but different title ( messages from more whattsupp contacts or more than a mail) in the notifications pane GW shows only the last message and a number with the other contacts. in andorid wear (but meany other whatches has the seam behavior) i see all the messages if they are from the same contact. If more than a contact wrote, i see the very last message of each contact, and not grouped by app. Is there a way to change this?
thans inadvance
Click to expand...
Click to collapse
I have same problem and i cant even add tracks to my watch active 2 because google play music stopped support.
akiraduy907 said:
I have same problem and i cant even add tracks to my watch active 2 because google play music stopped support.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Categories

Resources