Hi! So the remote connection via wifi stops working on my Active 2. Only way I've found to make it work again is a reset of the watch, then it starts working for about a week before I have to make another reset..
Do anyone know what the problem might be? Or is there another way to make a reset of only remote connection so I don't have to do a reset of the whole watch?
Restarting the watch or turning remote connection off and on again doesn't work.
Thanks in advance!
Related
I have a program called Dijit that uses bluetooth to control TV's, Cable boxes, etc.. I had a Motorola Atrix and it worked just fine with it. I just got the S3 and it keeps losing connection. I have to keep clicking on connect and eventually it will ask for my PIN again and finally it will connect. Anyone have any ideas on this? I have deleted the pairing a few times but hasn't worked.
Hi, I've tried all the troubleshooting steps on how to fix wifi connection but it seems there's no luck.
I've already change the firmware but still no connection.
The problem is, I can connect to a wifi but it has no connection. It will only "saved,secured" and that's all.
Anyone can help?
Same issue here.
I'm starting to think that the eletronics trash can is the solution...
My Samsung Galaxy T-520 detects all Wi-Fi networks, but it doesn't connect to any. The status shows "saved, secured", but it fails to connect. I tried everything, switching on/off passpoints, bluetooth and whatever, even factory resets (twice). I also tried to start the device without the Google account, skipping everything. I also tried a cell phone access point, it's all useless. All my other devices work, so it's not the router. Maybe it's a hardware problem. It suddenly stopped working
Hi all,
I've encountered a strange and annoying problem with my H/U. Unit is a PX3 based Hizpo 6.2" Running 7.1.2
My problem is, when I turn on hotspot manually on my phone, the H/U happily auto connects and internets is available for spotify etc etc.
But, when I use an app (Hotspot start, Carspot ready, Car Automatic, or even made a flow in Automate) to automatically turn on my phone's hotspot when the bluetooth connection has been made, my H/U will not connect, it gets stuck at 'Obtaining IP address'.
I've tried lots of things but no joy.
Please help, thanks!
There was a change made to the Android system which stopped apps from enabling services. wifi is a service and can no longer be started by apps. I ran into the same issue a while back. It was all working perfectly for a while then an update borked it.
jks8496956 said:
Hi all,
I've encountered a strange and annoying problem with my H/U. Unit is a PX3 based Hizpo 6.2" Running 7.1.2
My problem is, when I turn on hotspot manually on my phone, the H/U happily auto connects and internets is available for spotify etc etc.
But, when I use an app (Hotspot start, Carspot ready, Car Automatic, or even made a flow in Automate) to automatically turn on my phone's hotspot when the bluetooth connection has been made, my H/U will not connect, it gets stuck at 'Obtaining IP address'.
I've tried lots of things but no joy.
Please help, thanks!
Click to expand...
Click to collapse
I got same issue I tried doing factory reset 2 times then it’s started working for 5 day then again same issue
I had the same problem and I solved it by disabling screen lock and using Tasker with secure settings and toucktask to simulate manual hotspot activation.
Hi folks,
I've got my Xiaomi Mi 9 SE (Global Version) two weeks ago, and I'm very happy with it. There is only one problem:
I can't share my Data Connection via Bluetooth! ..
Neither with my car and its bluetooth speakerphone, nor with my Smartwatch, I can't get managed to share the connection.
So the Bluetooth connection itself is up and running without any problems! Only the data connection is not shared. The car shows me no signal (general network), and the SmartWatch does not get a connection to the Internet.
I looked up the Tutorial here in the old en.miui-Thread but I don't get the "Enable Internet Access"-Button in the paired Device Menu (part#6/7 in the Tutorial). I've activated the Bluetooth Tethering mentioned in part#5..
Is there any other way to share my Smartphone Connection via Bluetooth to paired Devices?
I've re-paired the devices multiple times. I also have done a factory Reset with Phone and SmartWatch. The problem occured with original Global Rom, and still occures with latest xiaomi.EU Rom.
Hope you can help me..
Best Regards
Some news: Occasionally it works. Sometimes I can access the Internet with my Smartwatch, which is connected to my smartphone via Bluetooth. But really rather rarely. And even without me changing anything. I don't even touch the smartphone yet, and suddenly I have Internet access on the Smartwatch, 2 minutes later but then again no more. Damn weird.
EDIT: Solved it! You have to set every Priority for the Wear OS Notifications in the App Manager to "High" and allow everything for this App.. Now I have continous Data Connection via my SmartWatch, Problems are gone
I got my S22 a couple of days ago. Previously, I had a Pixel 5. I bought a Motorola MA1 dongle to use Wireless AA on my car. It worked perfectly with my Pixel 5.
I setup my S22, and while it does connect to the dongle and recognize it as Wireless AA and all, it drops the WiFi connection after a few seconds with a "WiFi Disconnected" toast message near the lower part of the screen. It then repeats the process indefinitely: Connects to the dongle's WiFi, stays for about 5 seconds, drops with WiFi Disconnected message, reconnects to the WiFi...
At first I thought it might be realizing the WiFi connection does not provide any internet, which is right, and switches to mobile due to the "Switch to mobile" option. So I turned that off. Still, same message and no connection.
I've tried setting it up several times but it's always the same error. FYI it works correctly with USB-C wire.
Anyone got any ideas how I could solve this? Maybe some kind of developer network setting to hold on to the WiFi connection a bit longer or something?
Thanks!
Factory reset the MA1. I had a similar issue after migrating from the S10 to the S22 that was only cleared up by resetting the dongle. I'm thinking it's more of an MA1 issue than an S22 issue.
Tacoo said:
Factory reset the MA1. I had a similar issue after migrating from the S10 to the S22 that was only cleared up by resetting the dongle. I'm thinking it's more of an MA1 issue than an S22 issue.
Click to expand...
Click to collapse
That's through the process of holding the side button for 45 seconds, right? Sadly, I've already done it. No luck...
Solved! Following a reddit comment advice, I factory reset Mazda's infotainment system, as well as the MA1 dongle, and deleted both Mazda's and the MA1 pairings in bluetooth on the cellphone .
Then, did the whole setup again. Error persisted. Connected via wired and was able to establish wired AA connection. Disconnected and tried the dongle again. IT WORKED!
Thanks Tacoo (As a Mexican, I like your username) for your assistance!