Alright, so I've heavily tested this with a ton of bluetooth devices and 5 access points, both 5Ghz and 2.4Ghz.
When I have both wifi and bluetooth on, with the device connected to both services (both a BT device and an AP) neither radio works. WiFi says connected, but doesn't load anything, can't ping out at all. Bluetooth will find the device, connect, and disconnect within a few seconds.
I tested the same devices but only using one radio at a time and all the BT devices stay connected with WiFi off, and all APs are connected and load data with BT off.
Does anyone know what's going on? I've suspected this to be an issue since 4.0, but it's still around in 5.0.1. It's persistent across ROMs and RUUs, so it can't be a rom issue. Currently I'm on Viper 4.6.1, S-off, SCID (although this happened before I S-Off'd as well)
Does anyone else experience this issue? Any potential fixes?
I run into something similar periodically...
My 5ghz wifi always works no matter what.
2.4ghz / bluetooth will work for 2-3 days... then it stops... no 2.4ghz SSIDs show up in wifi and no bluetooth device will connect... Even turning BT/Wifi/Airplane on or off in any combo. Only a reboot will fix it.
My friend also started having this issue.
I've been all over and no one has a solution. I use an android wear device, so bluetooth is necessary :/
I have had this watch just about a week, after multiple resets, checking settings, I still cannot get the watch to connect to the internet via wi-fi without my phone. It will say it's connected to the network within the settings screen, but be unable to perform any tasks such as ok google commands, etc.
I just spoke to Huawei, and they said you cannot connect to the internet without your phone being paired via bluetooth. Is that correct?
yes, the wifi connection is only used to connect to your phone via the internet/wlan (cloudsync), but it can't do anything without it.
Hi I recently purchased a Huawei watch and it's amazing so far. Though it might not have its all of its functionality with my iPhone 6 it's still pretty good and was decently priced. My issue with it so far is that my wifi connection seems to be interfered whenever I have my watch connected through Bluetooth. I have noticed this since my internet service returns when I turn off the Bluetooth. I have tried factory resetting it on multiple occasion. I even updated my phone and the watch through the wifi router. The phone itself shows that there's a connection but no internet service is actually going through the phone or watch. I've tried looking around but most issues seems to be Bluetooth dropping versus internet service. I hope this can help others that have the same issue.
I have same problem (( I dont know what to do. Is not possible to update my watch even surfing on the internet. Wifi signal is full, but no internet service. In settings is not available Wi-Fi settings. If bluetooth is turned off my internet service works good. (iPhone 6 - iOS 9.3.3, Huawei Watch 1.4 (6.0.1)) What can I do please?
That is by design! Wi-Fi only works when it loses the Bluetooth connection. See this: https://support.google.com/androidwear/answer/6207505?hl=en
i have this issues in wear 2
Hi all,
I've encountered a strange and annoying problem with my H/U. Unit is a PX3 based Hizpo 6.2" Running 7.1.2
My problem is, when I turn on hotspot manually on my phone, the H/U happily auto connects and internets is available for spotify etc etc.
But, when I use an app (Hotspot start, Carspot ready, Car Automatic, or even made a flow in Automate) to automatically turn on my phone's hotspot when the bluetooth connection has been made, my H/U will not connect, it gets stuck at 'Obtaining IP address'.
I've tried lots of things but no joy.
Please help, thanks!
There was a change made to the Android system which stopped apps from enabling services. wifi is a service and can no longer be started by apps. I ran into the same issue a while back. It was all working perfectly for a while then an update borked it.
jks8496956 said:
Hi all,
I've encountered a strange and annoying problem with my H/U. Unit is a PX3 based Hizpo 6.2" Running 7.1.2
My problem is, when I turn on hotspot manually on my phone, the H/U happily auto connects and internets is available for spotify etc etc.
But, when I use an app (Hotspot start, Carspot ready, Car Automatic, or even made a flow in Automate) to automatically turn on my phone's hotspot when the bluetooth connection has been made, my H/U will not connect, it gets stuck at 'Obtaining IP address'.
I've tried lots of things but no joy.
Please help, thanks!
Click to expand...
Click to collapse
I got same issue I tried doing factory reset 2 times then it’s started working for 5 day then again same issue
I had the same problem and I solved it by disabling screen lock and using Tasker with secure settings and toucktask to simulate manual hotspot activation.
Hello guys how are you?
Recently I bought a Dasaita PX6 Android 10 for my Toyota CHR. Camera working OK, Sound OK... but I have a problem with WIFI connection.
As soon as setup my phone as hotspot, I search that WIFI on DASAITA. I find it and connect to it but as soon as IP address is raised WIFI turns off automatically.
Here I show you a video of the problem:
youtube.com/watch?v=akjF7q0NvJc&feature=youtu.be&spm=a2g0s.imconversation.0.0.560b3e5f2rShbE
Thanks
I had the same issue. I think it has to do with the Zlink app which tries to put the HA in hotspot mode. I managed to switch on wifi after closing the Zlink app manually and disabling the hotspot in the dropdown menu(the icons which appear if you swipe down from the top of the screen). Unfortunately the wifi connection with the hotspot of my iPhone is nog always stable. Sometimes it disconnects after a couple of minutes.
SYoung said:
I had the same issue. I think it has to do with the Zlink app which tries to put the HA in hotspot mode. I managed to switch on wifi after closing the Zlink app manually and disabling the hotspot in the dropdown menu(the icons which appear if you swipe down from the top of the screen). Unfortunately the wifi connection with the hotspot of my iPhone is nog always stable. Sometimes it disconnects after a couple of minutes.
Click to expand...
Click to collapse
Thanks for your reply.
If you saw the video I linked I have closed all apps and the problem is still there. I don't know what happens
CyrusMzRG said:
Thanks for your reply.
If you saw the video I linked I have closed all apps and the problem is still there. I don't know what happens
Click to expand...
Click to collapse
Yes, a saw that, but as far as I can see, you did not disable the hotspot before turning on wifi. I needed to do that as well.
SYoung said:
Yes, a saw that, but as far as I can see, you did not disable the hotspot before turning on wifi. I needed to do that as well.
Click to expand...
Click to collapse
I think as soon as wifi is set to ON, hotspot turns off automatically. It can be shown also on the video.
Actually I use CAR PLAY but I would like to swap between both options with no connection problems :crying:
I thought my suggested method worked, but today it did not work for me either. I agree with you that this is quite annoying. Hopefully someone else can help us out.
i have same issue... looking forward to somebody do a stable update that solve this problem
I have this unit. What works for me is to use usb hookup for CarPlay, then you can use phone hotspot on radios WiFi. You have to turn WiFi on a few times after connecting phone through usb for it to stick. For wireless CarPlay, the radio uses the WiFi resources and turns off selectable WiFi.
Sent from my iPad using Tapatalk
the problem for me is that my iphone is not connect well to the bluetooth of the Dasaita, the issue is that i can't answer or make a call through the Dasaita (android)..... When i'm able to connect to BT and the Zlink start then the BT disconnects, when switch shut down Zlink app BT won't connect anymore
CyrusMzRG said:
I think as soon as wifi is set to ON, hotspot turns off automatically. It can be shown also on the video.
Actually I use CAR PLAY but I would like to swap between both options with no connection problems :crying:
Click to expand...
Click to collapse
I think Syoung (above) is correct.
Obviously you can't run hotspot and wifi at the same time. It's one or the other.
If watch the video closely, the hotspot is off. As soon as wifi is turned on and the phone connects SOMETHING turns the hotspot on (you can see it getting turned on at the 19 second mark in the video), which in turn shuts off the wifi.
Maybe try completely disabling hotspot and see what happens
Well. I tried to connect the iPhone to the car via USB cable to launch CARPLAY. I think my car USB port that actually y also connected to DAISATA doesn’t support CARPLAY. Maybe I need to connect another cable to the back of DASAITA module to make it work.
In addition about the HOTSPOT. The DAISATA HOTSPOT is automatically set to ON to link with iPhone CarPlay.
If I turn it off as soon as my iPhone is near (also set use with CarPlay) hotspot back to ON and CARPLAY IS LINKED AND LAUNCHED.
Do you know if I need to use another cable connected to usb connector located in the back of DAISATA??
Thanks
Hello again. This is what I did and noticed:
- Car usb socket (connected to Daisata) doesn't work with USB CARPLAY.
- I connect the extra usb port to DAISATA.
- CARPLAY via USB working OK on that port.
- If using WIRELESS CARPLAY, Dasaita acts as hotspot creating a WIFI network where iPhone connects automatically.
- Now... I connect the iPhone to the new USB port for CARPLAY ( working ok and connecting faster). I disabled Hotspot from DASAITA. I turned ON WIFI and connect Dasaita to my iPhone hotspot . ALL OK.
So as somebody said is not possible use WIRELESS CAR PLAY and also have WIFI on Dasaita software.
I think connecting the iPhone to the new port we have the 2 connections ( car play and wifi) and on the other hand we can recharge the iPhone.
BUT.... now I need to solve another problem. I don't know why I need to switch off the Hotspot on iPhone each time I want The Daisata connects to the iPhone Hotspot. If I leave the hotspot always ON ( as it MUST BE) the wIFI that iPhone creates doesn't appear on DAISATA. As soon as I switch OFF then ON DAISATA connects in 1 sec to my iPhone
Best regards
CyrusMzRG said:
Hello again. This is what I did and noticed:
- Car usb socket (connected to Daisata) doesn't work with USB CARPLAY.
- I connect the extra usb port to DAISATA.
- CARPLAY via USB working OK on that port.
- If using WIRELESS CARPLAY, Dasaita acts as hotspot creating a WIFI network where iPhone connects automatically.
- Now... I connect the iPhone to the new USB port for CARPLAY ( working ok and connecting faster). I disabled Hotspot from DASAITA. I turned ON WIFI and connect Dasaita to my iPhone hotspot . ALL OK.
So as somebody said is not possible use WIRELESS CAR PLAY and also have WIFI on Dasaita software.
I think connecting the iPhone to the new port we have the 2 connections ( car play and wifi) and on the other hand we can recharge the iPhone.
BUT.... now I need to solve another problem. I don't know why I need to switch off the Hotspot on iPhone each time I want The Daisata connects to the iPhone Hotspot. If I leave the hotspot always ON ( as it MUST BE) the wIFI that iPhone creates doesn't appear on DAISATA. As soon as I switch OFF then ON DAISATA connects in 1 sec to my iPhone
Best regards
Click to expand...
Click to collapse
I went into the zlink app preferences and turned off autoload and control system settings. This seems to stop zlink from turning everything back on when you turn it off. Been working for a few days. I do not however use android auto. You would need to play with the app to see how it functions without those permissions.
Hello,
I couldn't make the switch to wifi on. It kept going off. Tried your help, nothing worked.
What helped me today was a complete "power off". A restart.
It's working now.
Hi, I have a Dasaita PX6 with Max10, I have same issue, i have an iPhone 13 Pro Max, I don't know what to do, I can't solve, could you help me? Thank you in advance
I had a similar issue. I recently purchased a Dasaita HD5367-H10 unit and I've been having some trouble with the WiFi.
When the unit turns on, the WiFi turns on and it connects to my phone's hotspot. Shortly after it connects, the WiFi turns off and I have to manually turn it on again. This only happens once upon boot up and it works fine for the rest of the duration. Once I restart the unit, the issue occurs again.
I think I found a workaround. Disabling ZLink from the Factory Settings menu seems to "fix" the problem, but now the ZLink daemon service is not working.