Related
Greetings,
I'm trying to build a clockworkmod recovery for my smartphone Fujitsu Arrows X F-02E. I've got the stock recovery dumped from the phone (attachments) and the recovery.fstab. I used them to build recovery on this site builder.clockworkmod.com. Recovery compiled successfully. Then I flashed it to my phone. And when I try to boot into recovery nothing happens, the phone just boots normally into the system (the stock recovery, in its turn, booted normally). Can anyone help with making a CWM recovery?
UPDATE: I can't attach these files here so I've uploaded them to my Cubby: cubby.com/pl/Android/_1f03da99a7034dd6b5ed7cb27bcc0bb0
UPDATE2: There are source code files of firmware of F-02E here - http://spf.fmworld.net/oss/oss/f-02e/ But I'm not advanced in programming enough to use it.
Cat In Boots said:
Greetings,
I'm trying to build a clockworkmod recovery for my smartphone Fujitsu Arrows X F-02E. I've got the stock recovery dumped from the phone (attachments) and the recovery.fstab. I used them to build recovery on this site builder.clockworkmod.com. Recovery compiled successfully. Then I flashed it to my phone. And when I try to boot into recovery nothing happens, the phone just boots normally into the system (the stock recovery, in its turn, booted normally). Can anyone help with making a CWM recovery?
UPDATE: I can't attach these files here so I've uploaded them to my Cubby: cubby.com/pl/Android/_1f03da99a7034dd6b5ed7cb27bcc0bb0
Click to expand...
Click to collapse
did you use
# cat /proc/mtd
or http://forum.xda-developers.com/showthread.php?t=2334554
to get the recovery.img
hechis said:
did you use
# cat /proc/mtd
or http://forum.xda-developers.com/showthread.php?t=2334554
to get the recovery.img
Click to expand...
Click to collapse
I've used different ways. Using adb I've downloaded, for a backup, all files from phone in /dev/block/ section. I've got 45 files,from mmcblk0 to mmcblk45, and only two of them had 10240kb size, one of them was a recovery. Then I've made backup with recovery-tools and got one more .img file. Checking the md5 sums showed that mmcblk32 is equal to recovery.img. So here it is. As alternative way I could get this recovery by copying /dev/block/platform/sdhci-tegra.3/by-name/SOS . It's the same recovery and equal to mmcblck32. So there is no doubt that it's the correct file we need.
UPDATE2: There are source code files of firmware of F-02E here - http://spf.fmworld.net/oss/oss/f-02e/ But I'm not advanced in programming enough to use it.
Found this info - blogs.yahoo.co.jp/y_19980320/33484520.html (use google translate). It seems that bootloader is locked and it's divided into 2 parts. First one, BL1 (not re-writable) is checking the authenticity of the BL2 (re-writable, but without correct signature it has no sense) after that, BL2 checks the kernel and boot the phone. Can we do something with that? (hello Motorola Defy)
And in the second post - blogs.yahoo.co.jp/y_19980320/33513111.html there are some usefull info too, but I culdn't understand a bit of this, even with google translate. Does anyone knows what is said in that post?
I think I've got both of this files. BI1 and BI2 here - cubby.com/pl/Android/_1f03da99a7034dd6b5ed7cb27bcc0bb0 But I may be wrong. As mentioned in the article in the first link the first part of bootloader can not be re-written. But I've tried and both parts flashed successfully. So either I've found not the bootloader files either info in the article is wrong. How can I find out are these correct bootloader files or not?
It seems that I found wrong files. Correct files seems to be - mmcblk0boot0.img and mmcblk0boot1.img. Here - cubby.com/pl/Android/_1f03da99a7034dd6b5ed7cb27bcc0bb0
You can try this
From China:
http://bbs.xda.cn/thread-11674785-1-1.html
From xda
http://forum.xda-developers.com/showthread.php?t=2334554
Works with F03D
I have a Fujitsu F03 D , this recovery can works with it ?
Thanks , bye :fingers-crossed:
F02-E Data Recovery
Hello everybody, I don't know if I am on the right topic, but I think people here can answer because it's about the Fujitsu F02-E.
I have this phone since more than 4 years and I was plenty satisfied with this item but since yesterday, the phone don't want to work anymore...
At first, it was starting until the screen "ARROWS" and then restart again and again.
Today, the phone is trying to start by two times himself when I put the battery in it...(Orange led; green led; orange led, green led, and at last orange led twinkle two times..then, all is switch off)
When I try to charging, it try to restart like I was explaining and then all is switch off, even the orange led that tells you it is charging...
But when charging it try to restart every 5 minutes..
Now, the screen switch on very rarely and not even for one second.
The very important question is:
Do You know a trick or an application that can recovery all data, because there are A LOT of important things Inside. I have found a few data recover but they are not compatible with the F02-E.
I would be very, very grateful if You can help me, please.
ps: Sorry for my English, I'm French
Have a good day.
Thank You.
Just going to dump all the info I've found about this device into this thread. All the threads pertaining to this thread are in Russian and I can't read Russian, so this might be helpful to any English speaking owners of this tablet.
Special thanks to Telegram user @SSDD_1744 (don't know your XDA/Reddit user, I'm sorry) for basically spoonfeeding me all these instructions!
WARNING: If you need to flash to stock for whatever reason, be sure to download a image file specific to your country. If you don't, you'll hard brick your device that can only be fixed QPST (supposedly).
Rooting:
(Tested on 5.0.2)
Install KingRoot. Let it root your device.
Install Super-SU Me, to get rid of the bloatware that comes with KingRoot.
Installing Xposed:
I used Flashify to flash TWRP. Be sure to flash the right version though (2.8.7.7 v2) or else you won't be able to mount cache.
Then download Xposed (version sdk21 ARM) and flash it.
WARNING: Flash v1 of the modded TWRP and you won't be able install any apps after flashing Xposed.
Unbricking:
Still working on it. Downloaded QPST but have not been able to get QPST 2.7 to read the tablet.
Links:
Discussion:
https://translate.googleusercontent...690491&usg=ALkJrhiWSlkbZ-tUofZx68NPSGIv8pjIPA
Root:
https://translate.googleusercontent...JrhhQszcRvUo8HILThvz57JmsLj4L9g#entry44556703
https://translate.googleusercontent...JrhiCt__6apcRhk-gtcBExYJCnC9nGQ#entry41676452
Instructions for obtaining the rights to Ruth phones / tablets.
Tested on Android 4.4+
perhaps this algorithm works on Android 5+, I have no way to verify
All transactions with their phones / tablets are performing at your own risk !!!
To get started, read this post from start to finish and only then proceed to action!
Introduction
This instruction is written based on my own experience obtaining root on their plates, and then on the Xperia M2, bought plemyashki. For instructions attached versions of applications that were relevant at the time, the new version can download the relevant topics on the forum, there will find all information on how to work with the proposed programs and algorithms for their actions (links to topics added).
For all the action with your phone / tablet you are responsible for yourself!
Download all the necessary tools to obtain Root (of instructions / topics on the forum), obespechte for phone / tablet access to the Internet (Wi-F / mobile data) and let the phone settings / tablet installation from unknown sources.
Needed Downloads
KingRoot_V4.5.0B202.apk (6.76 MB)
Me_5.9.apk-SuperSU (9.07 MB)
V2.49 Beta.apk SuperSU (5.63 MB)
eu.chainfire.supersu.pro.205.apk (52,88 KB)
Next in series:
1. Install KingRoot .
Get Ruth's right, in the device may reboot.
2. Set SuperSU-Me, .
Run the grantor, the program deletes KingRoot and Chinese KingUser with replacement SuperSu.
Remove the longer SuperSu-Me the desired program.
3. Obnovyaem SuperSu to the latest version. Then set PRO-key .
Installing Pro-key Optionally !!! Use Cases SuperSu without installing key .
4. Open SuperSu and on-demand update binary SU normal way. After a successful update, confirm the request to restart.
5. To make sure that everything is done correctly, check the correct installation and operation of Ruth (mount the system partition on the record), I used the Root Checker Pro and Root Explorer , respectively.
The output is a complete rut without kitayschiny with SuperSu Pro. We use and enjoy
Click to expand...
Click to collapse
Unlocking bootloader (haven't tried this):
https://translate.googleusercontent...Jrhh6g4wI-8Hb_LzAcPnIUxYvWNzZ0A#entry46711087
Stock firmware:
https://translate.googleusercontent...?s=&showtopic=703414&view=findpost&p=45272695
Damn, development has really boomed on this little tablet! Finally got it back after a few months (I sent it into Asus to repair it for me).
Stock ROM:
https://www.asus.com/ru/Tablets/ASUS_ZenPad_80_Z380KL/HelpDesk_Download/ (I can't get the English version to load, delete the /ru/ and you'll be redirected to the English site)
https://www.asus.com.cn/Tablets/ASUS_ZenPad_80_Z380KL/HelpDesk_Download/ (Chinese site)
==== REMEMBER TO DOWNLOAD THE CORRECT COUNTRY OR YOU'LL BE BRICKED) ====
https://yadi.sk/d/b1NMLXHBsNV8C (latest software for the worldwide model)
[http://4pda.ru/forum/index.php?showtopic=703414&st=320#entry50270292]
http://4pda.ru/forum/index.php?showtopic=703414&st=200#entry49389176 (Asus Flash Tool and stock ROM v4.8.2 WW [WorldWide])
Unlocking bootloader:
http://4pda.ru/forum/index.php?showtopic=690491&st=1280#entry48200665 (use fastboot oem device-info to check if it's unlocked)
Root:
http://4pda.ru/forum/index.php?showtopic=690491&st=580#entry44778545 (KingRoot - you'll need a 4PDA.ru account to download this)
http://4pda.ru/forum/index.php?showtopic=690491&st=1280#entry48185323 (last section of the post)
CM13:
http://get.cm/?device=P024&type=nightly
https://vasy.ru/CM13/
http://forum.xda-developers.com/android/help/asus-zenpad-8-z380kl-custom-rom-t3370277
http://forum.xda-developers.com/android/development/kernel-asus-z380kl-p024-kcal2-t3405595 (Kernel)
Recovery:
https://vasy.ru/TWRP/P024/
http://4pda.ru/forum/index.php?showtopic=690491&st=1220#entry48094504 (TWRP 2.8.7.0)
http://forum.xda-developers.com/android/help/asus-zenpad-8-0-z380kl-bootloop-t3373051
Guides:
http://4pda.ru/forum/index.php?showtopic=690491&st=1280#entry48185323 (this has a lot of instructions: root, recovery, boot partition restore, adb drivers etc.)
http://forum.xda-developers.com/android/help/asus-zenpad-8-0-z380kl-bootloop-t3373051 (this has a bunch of files, Resurrection Remix [I haven't tested it yet tho], and instructions on getting out a bootloop)
http://4pda.ru/forum/index.php?showtopic=690491&st=1640#entry49724823 (flashing stock software)
If you want to open the engineering menu, type " * # * # 4636 # * # * "
To boot into fastboot, restart/turn on the device and hold volume up. It'll pop you into a menu with three options.
To boot into recovery, from the fastboot screen (three options), use the volume buttons and navigate to the second option "factory reset" and hit power to confirm. It'll boot into recovery.
=====================================================================================
Recommended way to flash ROMs:
1) Download TWRP. Use adb to boot (NOT flash) into TWRP. Flash ROM there.
2) use KingRoot to root. Use Flashify to flash the ROM.
======================================================================================
If you want to go look up some more info or guides, go here:
http://4pda.ru/forum/index.php?act=...=rel&subforums=0&query=z380kl&forums=570&st=0
and use GTranslate to translate the page. The first page is the earliest posts with the keyword, the last page are the latest post.
please add these ROM's for this Device:
Ressurection Remix:
https://www.androidfilehost.com/?w=files&flid=121811
AICP 12.1:
https://www.androidfilehost.com/?w=files&flid=136181
The latest Official ROM P024 model:
http://dlcdnet.asus.com/pub/ASUS/Ee...ser.zip?_ga=1.109506565.1670552787.1483182775
ZenPad 8 Z380KL Firmware: V5.9.0.0 (WW SKU version only)
Improved Item:
1. Update Google security patch
2. Support unlock tool
9008 brick info:
https://4pda.ru/forum/index.php?showtopic=643084
Pertaining to p024:
https://4pda.ru/forum/index.php?showtopic=643084&st=5740
https://4pda.ru/forum/index.php?showtopic=643084&st=3660 (page 179 - 180, 183 - 185 discusses the files needed to unbrick and how you would - CTRL + F Russ and read the people who quote him)
How I bricked: https://4pda.ru/forum/index.php?showtopic=703414&st=180#entry49329798
https://4pda.ru/forum/index.php?showtopic=690491&st=1420#entry48527044 (unbricking files - dead link though)
https://4pda.ru/forum/index.php?showtopic=703414&st=140 (discussing how to fix using the images from the dump)
I see that Lineage OS is supported on Z380KL. However, I found the wiki spec showing Snapdragon 410, but I found Z380KL in Asia with Snapdragon 615. Before I commit, I'd like to know if anyone knows whether LineageOS is fully compatible with Z380KL with Snapdragon 615 chipsets? Thanks.
Special thanks to @a350tv for helping me comb through 4PDA - this process would've been a lot slower or just wouldn't have happened if he hadn't offered to translate guides and download links to me. So most of the credit goes to him.
Flashing TWRP on 6.0.1 (Sept 1, 2016 patch):
1) grab your drivers (W10: boot into "no driver signature verification mode" to install the drivers needed for fastboot)
https://drive.google.com/open?id=1cGcoDCvmTxfXWNTG0iOXHw1WScmYBrKS
2) turn on debugging
3) type in "adb devices", verify that your computer sees your tablet (if you don't have ADB/Fastboot, get https://forum.xda-developers.com/showthread.php?t=2317790)
4) type in "adb reboot bootloader"
5) you'll see three options: 1. Enter SD DL mode, 2. Factory Reset, 3. Exit update mode
6) type in "fastboot devices", verify that your computer sees your tablet
7) grab your TWRP file (http://vasy.ru/TWRP/P024/) and type in "fastboot flash recovery [replace w/ location of the TWRP file].img"
8) once it says "finished", click factory reset mode (use volume buttons to navigate, power button to enter)
9) it should reboot into TWRP, slide to allow modifications
10) Boom, TWRP is installed.
OPTIONAL, BUT HELPS TO KEEP TWRP INSTALLED: Flash Magisk.
That way, stock recovery won't overwrite TWRP when you reboot.
IF YOU WANT TO KEEP TWRP BUT DON'T WANT Magisk:
1) After first boot into TWRP, turn off tablet.
2) Then turn on and hold Volume Up + Power. That will boot you into Bootloader Mode.
3) Go into factory reset and it should boot you into TWRP.
Now, it's safe to boot into the OS.
(TL;DR: Boot into TWRP twice before booting into the OS or else stock recovery will overwrite TWRP.)
Flashing LineageOS:
1) DL LOS from https://download.lineageos.org/P024
2) DL GApps from http://opengapps.org/ (choose 7.1)
3) boot into TWRP
4) go into Wipe, slide to wipe
5) go to Install, click on LOS file > add to queue, click on Open GApps file > add to queue, flash
6) wait til it's done, click "reboot"
7) wait a while (took mine 3 or so minutes to boot)
8) enjoy!
My GDrive folder with all files needed (except ROM and GApps)
https://drive.google.com/open?id=0BzJ-WWaQYXttTkttdHNELVBEc2M
To do:
Use this tutorial to backup all my partitions, just in case I get bricked yet again.
https://forum.xda-developers.com/showthread.php?t=2450045
Links to unbrick device via Asus FlashTool
Links to service ROMs (for use with AFT)
Add original links from 4PDA
ROMs
LineageOS: https://download.lineageos.org/P024
AICP: https://saki-sss.blogspot.com.by/2016/12/z380k-aicp-121.html
Resurrection Remix: https://androidfilehost.com/?w=files&flid=121811
(made by https://androidfilehost.com/?w=profile&uid=457095661767100043, found from http://andmem.blogspot.jp/2016/05/asus-zenpad-8-z380kl-root-rom.html#chapter-19) - abandoned?
seities said:
I see that Lineage OS is supported on Z380KL. However, I found the wiki spec showing Snapdragon 410, but I found Z380KL in Asia with Snapdragon 615. Before I commit, I'd like to know if anyone knows whether LineageOS is fully compatible with Z380KL with Snapdragon 615 chipsets? Thanks.
Click to expand...
Click to collapse
probably not. I think it's only compatible with the SD 410.
xDark_ said:
Special thanks to @a350tv for helping me comb through 4PDA - this process would've been a lot slower or just wouldn't have happened if he hadn't offered to translate guides and download links to me. So most of the credit goes to him.
Flashing TWRP on 6.0.1 (Sept 1, 2016 patch):
1) grab your drivers (W10: boot into "no driver signature verification mode" to install the drivers needed for fastboot)
https://drive.google.com/open?id=1cGcoDCvmTxfXWNTG0iOXHw1WScmYBrKS
2) turn on debugging
3) type in "adb devices", verify that your computer sees your tablet (if you don't have ADB/Fastboot, get https://forum.xda-developers.com/showthread.php?t=2317790)
4) type in "adb reboot bootloader"
5) you'll see three options: 1. Enter SD DL mode, 2. Factory Reset, 3. Exit update mode
6) type in "fastboot devices", verify that your computer sees your tablet
7) grab your TWRP file (http://vasy.ru/TWRP/P024/) and type in "fastboot flash recovery [replace w/ location of the TWRP file].img"
8) once it says "finished", click factory reset mode (use volume buttons to navigate, power button to enter)
9) it should reboot into TWRP, slide to allow modifications
10) Boom, TWRP is installed.
OPTIONAL, BUT HELPS TO KEEP TWRP INSTALLED: Flash Magisk.
That way, stock recovery won't overwrite TWRP when you reboot.
IF YOU WANT TO KEEP TWRP BUT DON'T WANT Magisk:
1) After first boot into TWRP, turn off tablet.
2) Then turn on and hold Volume Up + Power. That will boot you into Bootloader Mode.
3) Go into factory reset and it should boot you into TWRP.
Now, it's safe to boot into the OS.
(TL;DR: Boot into TWRP twice before booting into the OS or else stock recovery will overwrite TWRP.)
Flashing LineageOS:
1) DL LOS from https://download.lineageos.org/P024
2) DL GApps from http://opengapps.org/ (choose 7.1)
3) boot into TWRP
4) go into Wipe, slide to wipe
5) go to Install, click on LOS file > add to queue, click on Open GApps file > add to queue, flash
6) wait til it's done, click "reboot"
7) wait a while (took mine 3 or so minutes to boot)
8) enjoy!
My GDrive folder with all files needed (except ROM and GApps)
https://drive.google.com/open?id=0BzJ-WWaQYXttTkttdHNELVBEc2M
To do:
Use this tutorial to backup all my partitions, just in case I get bricked yet again.
https://forum.xda-developers.com/showthread.php?t=2450045
Links to unbrick device via Asus FlashTool
Links to service ROMs (for use with AFT)
Add original links from 4PDA
Click to expand...
Click to collapse
Thanks for the tutorial, I had already dared to flash twrp recovery before you wrote this tutorial...
I believe my bootloader is still locked. And I could not reproduce/ write exactly what I did. But, in my case, just for information, when I want to go back into twrp, I can boot into bootloader (power volume up) and then option 2 reset the device gives me the twrp... I am not sure if that is how you get it, but for me, I still had twrp.
I think i will install magisk after reading your post.
jutphaas said:
Thanks for the tutorial, I had already dared to flash twrp recovery before you wrote this tutorial...
I believe my bootloader is still locked. And I could not reproduce/ write exactly what I did. But, in my case, just for information, when I want to go back into twrp, I can boot into bootloader (power volume up) and then option 2 reset the device gives me the twrp... I am not sure if that is how you get it, but for me, I still had twrp.
I think i will install magisk after reading your post.
Click to expand...
Click to collapse
I don't think unlocking the BL is necessary for flashing LOS. But yes, that's how I get into TWRP as well.
Hello I'm new in the forum and I write from Italy, yesterday unfortunately I had the brilliant idea to downgrade my Asus z380kl through ADB, Fastboot and TWRP from pc so far so good, I go to flash the new rom and gives me error, I try to restore the backup here too error result? Tablet locked the only way to make it recognize to the PC is with ASUS FLASH TOOL ROM problem in format.raw unobtainable not even on the Russian site. Any good soul has the possibility to let me download it? Thanks, Sorry English but it is a translation of the very useful Google translate.
pucci2 said:
Hello I'm new in the forum and I write from Italy, yesterday unfortunately I had the brilliant idea to downgrade my Asus z380kl through ADB, Fastboot and TWRP from pc so far so good, I go to flash the new rom and gives me error, I try to restore the backup here too error result? Tablet locked the only way to make it recognize to the PC is with ASUS FLASH TOOL ROM problem in format.raw unobtainable not even on the Russian site. Any good soul has the possibility to let me download it? Thanks, Sorry English but it is a translation of the very useful Google translate.
Click to expand...
Click to collapse
Can you still access fastboot, then at least you can flash twrp as described before in this thread and install from twrp lineageos p024 (lineage-14.1-20180105-nightly-P024-signed.zip) and Open gapps to get google playstore etc , select Arm, (not 64) then version 7.1, then Pico would work.
If you have twrp, you at least can still use your asus... I have found no way to flash original stock... stock must not be flashed from twrp.
Since you mention twrp already used, you can try: turn your device off, then press volume up then the bootloader menu comes, select 2: reset to enter twrp(where it says reset. if you had flashed twrp, that is how you can get into twrp) from there, install lineage os and gapps from micro sd card
My rom is MMB29M.WW_P024-V5.9.4-20170613
xDark_ said:
OPTIONAL, BUT HELPS TO KEEP TWRP INSTALLED: Flash Magisk.
That way, stock recovery won't overwrite TWRP when you reboot.
Click to expand...
Click to collapse
I assume this is on stock rom ? What version of magisk would work? I found I can be back at stock with my twrp backup so ..
But magisk 15.3 zip failed to install on stock-
I also used supersu v82 working on stock, or lineageos.
Would you know what magisk works on lineageos?
I like the exsd extension of magisk so I would like to try it on this device, either stock or lineageos
jutphaas said:
I assume this is on stock rom ? What version of magisk would work? I found I can be back at stock with my twrp backup so ..
But magisk 15.3 zip failed to install on stock-
I also used supersu v82 working on stock, or lineageos.
Would you know what magisk works on lineageos?
I like the exsd extension of magisk so I would like to try it on this device, either stock or lineageos
Click to expand...
Click to collapse
Yes it was. I flashed 15.2 on both stock and LOS. I've heard of some issues with 15.x so you can try .2 or 14.x.
pucci2 said:
Hello I'm new in the forum and I write from Italy, yesterday unfortunately I had the brilliant idea to downgrade my Asus z380kl through ADB, Fastboot and TWRP from pc so far so good, I go to flash the new rom and gives me error, I try to restore the backup here too error result? Tablet locked the only way to make it recognize to the PC is with ASUS FLASH TOOL ROM problem in format.raw unobtainable not even on the Russian site. Any good soul has the possibility to let me download it? Thanks, Sorry English but it is a translation of the very useful Google translate.
Click to expand...
Click to collapse
What error was given? What do you see when you connect it to a computer? What does "tablet locked" mean? Would help if you gave some pictures too.
I'm currently in the process of getting the RAW files/service ROMs for AFT but I don't have an ETA on when I'll be able to get that.
No on the tablet I have not installed TWRP and no other recovery.When I go into the original recovery of the tablet there is always the screen with the lock closed at the bottom right and there is no way to show it to the PC even with adb sideload, l 'only program that recognizes me the tablet is Asus flash tool, however, as I have already written the damn ROM in RAW format is untraceable.
pucci2 said:
No on the tablet I have not installed TWRP and no other recovery.When I go into the original recovery of the tablet there is always the screen with the lock closed at the bottom right and there is no way to show it to the PC even with adb sideload, l 'only program that recognizes me the tablet is Asus flash tool, however, as I have already written the damn ROM in RAW format is untraceable.
Click to expand...
Click to collapse
Does it respons to adb devices of fastboot devices in this stage?
no, it is not recognized
Hi,
I have successfully installed lineage-14.1-20170316-nightly-P024-signed and open_gapps-arm-7.1-stock-20170322 on an Asus ZenPad 8.0 (Z380KL / P024 ) running UL-P024-WW-5.9.0.0. I temporary booted TWRP (twrp-3.0.3-0-20170130-P024) , keeping the original recovery.
Where is a good place to write/post a summary on how I succeeded. What steps I took, what challenges I faced?
Thanks,
Shortie
In the Asus ZenPad 8.0 section maybe
There is no section for this device on xdadevelopers. And I can not find out how to contribute to the lineage web site either. Any suggestions?
Can you tell me how to boot twrp on my device?
Shortie42 said:
Hi,
I have successfully installed lineage-14.1-20170316-nightly-P024-signed and open_gapps-arm-7.1-stock-20170322 on an Asus ZenPad 8.0 (Z380KL / P024 ) running UL-P024-WW-5.9.0.0. I temporary booted TWRP (twrp-3.0.3-0-20170130-P024) , keeping the original recovery.
Where is a good place to write/post a summary on how I succeeded. What steps I took, what challenges I faced?
Thanks,
Shortie
Click to expand...
Click to collapse
Hi Shortie,
I have the same tablet, but I cannot find any TWRP for this device. Where have you got your's from? Can you send it to me?
How did you manage to boot TWRP temporary? Don't you have to install/flash it first?
If there's no section on LineageOS to post your experience there why don't you post it here?
I assume you have read through this page: https://wiki.lineageos.org/devices/P024/install and taken note of all the warning about when data is lost and so on!
There is also a link to TWRP images on this page which is, unfortunately, dead. I found TWRP images on this site: https://vasy.ru/TWRP/P024/ from which I have been using twrp-3.0.3-0-20170130-P024.img
I have not flashed TWRP to the device instead I temporary boot the image. There are two ways:
adb reboot-bootloader with the device powered on - for me this does not work
This one works for me: fastboot boot twrp-3.0.3-0-20170130-P024.img . fastboot will then wait for a device - Just power on the device like this: Press both buttons: power + "volume +" in order to put the tablet in recovery mode
Once TWRP has started select the lineage os + gapps to flash to the device. This has worked for me many times - does not necessarily have to work for you since our original Android version might differ!
Shortie42 said:
I assume you have read through this page: https://wiki.lineageos.org/devices/P024/install and taken note of all the warning about when data is lost and so on!
There is also a link to TWRP images on this page which is, unfortunately, dead. I found TWRP images on this site: https://vasy.ru/TWRP/P024/ from which I have been using twrp-3.0.3-0-20170130-P024.img
I have not flashed TWRP to the device instead I temporary boot the image. There are two ways:
adb reboot-bootloader with the device powered on - for me this does not work
This one works for me: fastboot boot twrp-3.0.3-0-20170130-P024.img . fastboot will then wait for a device - Just power on the device like this: Press both buttons: power + "volume +" in order to put the tablet in recovery mode
Once TWRP has started select the lineage os + gapps to flash to the device. This has worked for me many times - does not necessarily have to work for you since our original Android version might differ!
Click to expand...
Click to collapse
Thanks a lot.
Meanwhile I also found this TWRP source (or rather, I dared to use that. I have little trust in Russian stuff). I used the test build and it worked well
I also found a boot unlocker from Asus (had to use another browser. In Firefox it didn't show up). Unfortunately the Archive seems to be broken.
The URL ist this: https://www.asus.com/de/supportonly/ASUS%20ZenPad%208.0%20(Z380KL)/HelpDesk_Download/ -> Driver & tools -> other -> the first entry
So I had to use the temporary TWRP method.
tosho1 said:
I also found a boot unlocker from Asus (had to use another browser. In Firefox it didn't show up). Unfortunately the Archive seems to be broken.
The URL ist this: https://www.asus.com/de/supportonly/ASUS%20ZenPad%208.0%20(Z380KL)/HelpDesk_Download/ -> Driver & tools -> other -> the first entry
So I had to use the temporary TWRP method.
Click to expand...
Click to collapse
In reply to myself:
The rar archive is not broken. I can unpack it with with 7zip under Windows. only urar under Linux fails.
Now the problem is: I cannot install the containing UnlockTool-9.0.0.30-signed.apk on my tablet. It states:
"The package conflicts with an existing package with the same name." (translated from German)
I never installed a package with that name.
Is it possible that it's a problem with LineageOS?
Supplement:
Yes. It was a LineageOS problem.
I made a restore of the stock android 6.01 and now I could install the unlocking app, and id did work. I can now flash the TWRP as usual. Hooray!
Strange, however that LineageOS acts that weirdly.
Hello everyone, after struggling for a few hours I managed to finally disable force encryption in my phone (so that TWRP could backup the data partition).
I'd like to write a quick list of what I did in the form of a guide to unlocking the bootloader, installing TWRP and getting root with Magisk. I'm just a user, not a developer and this guide is brief, it's not a detailed tutorial and does not include trivial steps (like how to install drivers for your OS).
Warnings: Although small, there is always the chance this bricks your phone. I take no responsibilities.
This will factory reset your phone so back up everything before you start.
My phone is Lenovo S5 (K520) Global version (see screenshot) I don't know if this will work for other firmwares.
Prerequisites:
Install Phone, ADB and Fastboot drives. You can get ADB and Fastboot binaries from here:
https://forum.xda-developers.com/showthread.php?t=2588979
Download this archive:
http://www.mediafire.com/?4dcvzw1hdmzfn10
It contains all the files used in this guide.
Alternatively, download all the files used from their sources.
You will need an SD card or a USB flash drive with an OTG adapter.
Copy the following files to it:
A. "Disable_Dm-Verity_ForceEncrypt_12.16.2018.zip"
(Downloaded from http://forum.xda-developers.com/showthread.php?t=3817389 )
B. "Magisk-v18.0.zip"
(Downloaded from http://forum.xda-developers.com/showthread.php?t=3473445 )
C. (optional) "\stock\boot.img"
(Downloaded from the global firmware @ 4pda)
If you chose to use Micro SD card, you can insert it now.
Note: I know there is a way to push these files directly to TWRP from PC through USB instead of using SD Card/Flash drive but I've never tried it.
Lets start:
1. Go to 'Settings>About phone' and tap on "Lenovo version" several times until developer options are enabled.
2. Go to 'Settings>System>Developer options' and enable "OEM unlocking" (Note: for me this option was greyed out and I had to connect to wifi and wait for a minute or two).
Optional: Enable "USB debugging" if you wish to enter fastboot via ADB.
3. Turn off the phone and press and hold 'Volume down'+'Power' buttons until you see "fastboot mode" on the phone screen (alternatively, don't turn off the phone and instead enter fastboot mode via ADB (adb.exe reboot bootloader)).
4. Connect the phone to the PC via USB and open a command prompt in the location that you installed fastboot binary to.
Type (after each command press enter):
Code:
fastboot devices
To verify that the phone is recognized. And if it is type:
Code:
fastboot oem unlock
Now on the phone LCD navigate to "Yes" with volume buttons and press power to select it.
Your phone will factory reset, this will take a few minutes. Let it finish.
5. Put the TWRP image in your fastboot path. I used "recovery-twrp-3.2.3-crn-seoul(v3.2.3-1).img" downloaded from this URL:
https://forum.xda-developers.com/android/development/lenovo-s5-k520-twrps-t3863860
But I included 2 more files that I found (I did not try them).
6. Enter fasboot mode again and type:
Code:
fastboot flash recovery recovery-twrp-3.2.3-crn-seoul(v3.2.3-1).img
(Substitute "recovery-twrp-3.2.3-crn-seoul(v3.2.3-1).img" with the recovery filename of you choice)
7. If successful, disconnect the USB cable and enter Recovery mode, do not turn off or reboot the phone because upon restart the phone will revert to stock recovery (I.E. delete TWRP).
To enter Recovery mode press and hold 'Volume down'+'Power' buttons until you see "fastboot mode" and from there choose "Recovery mode" with the volume buttons and confirm with the power button.
(Alternatively, you can try holding 'Volume up'+'Power' to directly enter Recovery mode but I found it a little finicky)
8. In TWRP, swipe to allow changes. Press cancel when asked for a password to decrypt data.
If you chose to use a USB flash drive with an OTG adapter, connect it and mount it (Mount>usb-otg).
9. Go to Wipe>format data, type "yes" and confirm (if you have any data like installed apps, contacts etc., it will be deleted).
10. Go to Install and install "Disable_Dm-Verity_ForceEncrypt_12.16.2018.zip".
The files will be in (/external_sd/ or /usb-otg/).
11. Install "Magisk-v18.0.zip"
Important note: If you want to keep encryption (if you don't care if TWRP can't access /data/) and just obtain root, skip steps 9 and 10.
12. Reboot to system and wait for a few minutes for the initial setup.
If for some reason boot fails (nothing happens after 10 minutes) and you can still enter TWRP (hold 'Volume up'+'Power'), then you can revert the changes by restoring the stock boot image (TWRP>Install>Install image>boot.img - put a checkmark on "boot").
If this worked for you, please tell us by replying to this thread.
Thanks a lot man. This phone is a beast in quality/price when talking about hardware. Costs a bit more than 100€ and has the same hard than others at 180-200€ at least. Bad thing is software but with TWRP and root everything is possible . Just found what project treble is, amazing possibilities. Can't beliebe nobody replied yet to yor post. Its a great guide and you show all the sources from where your downloads come. As you said in another thread its better this way so people can trust your content more:
C4lculated said:
I also wanted to root but I didn't want to run a bunch of unknown programs (from XN Logos), so I managed to install TWRP and root with magisk. I wrote a guide on how to do it:
https://forum.xda-developers.com/ge...ide-lenovo-s5-k520-twrp-root-decrypt-t3882402
Click to expand...
Click to collapse
I am yet waiting for my Lenovo S5 to arrive but I will give this guide a try. I was about to follow XN logos (stupdroid) guide/software but I prefer yours. Just one question... have you checked whether the TWRP v3.2.3 (latest) from dmilz make proper working backups? Can I trust that a full backup will be loaded correctly after installing any unofficial ROM, to go back to stock if necessary? I made once the mistake of relying a TWRP and later I found out that one was ok for flashing but didn't create working backups. I asked him also the same question, but I guess you also tried yourself to make a backup and restore from it using TWRP.
Next step will be to flash an Android 8.1 or 9 GSI rom (did I already say I'm amazed by GSI/project treble roms? just found about them last days). I will update you about my luck following your guide
does anyone enable lte bands, 4 and 28?
just bought this phone, currently on shipping..
I'll first try with twrp + aosp 9 GSI
Hi man, have you upgrade to gsi
acost91 said:
Thanks a lot man. This phone is a beast in quality/price when talking about hardware. Costs a bit more than 100€ and has the same hard than others at 180-200€ at least. Bad thing is software but with TWRP and root everything is possible . Just found what project treble is, amazing possibilities. Can't beliebe nobody replied yet to yor post. Its a great guide and you show all the sources from where your downloads come. As you said in another thread its better this way so people can trust your content more:
I am yet waiting for my Lenovo S5 to arrive but I will give this guide a try. I was about to follow XN logos (stupdroid) guide/software but I prefer yours. Just one question... have you checked whether the TWRP v3.2.3 (latest) from dmilz make proper working backups? Can I trust that a full backup will be loaded correctly after installing any unofficial ROM, to go back to stock if necessary? I made once the mistake of relying a TWRP and later I found out that one was ok for flashing but didn't create working backups. I asked him also the same question, but I guess you also tried yourself to make a backup and restore from it using TWRP.
Next step will be to flash an Android 8.1 or 9 GSI rom (did I already say I'm amazed by GSI/project treble roms? just found about them last days). I will update you about my luck following your guide
Click to expand...
Click to collapse
Kindly drop the procedure am hitting brick with all the method i used .????????
Stock firmware lenovo k520
I have tried your method on ROM that is based on China and also globally, and TWRP was successfully installed, and I have also tried several Rom GSI, and only AOSP Extended is successful, but with Bluetooth bugs it cannot be turned on, if others want flash files and stock firmware for k520, just let me know, thanks.
Working on S5 Pro too?
Hi! Can it work on S5 Pro too? I really want to root this device and I don't find out a way to get this happening. Thanks!
Does this work for s5 pro l58041?
Thanks
B4ph0 said:
I have tried your method on ROM that is based on China and also globally, and TWRP was successfully installed, and I have also tried several Rom GSI, and only AOSP Extended is successful, but with Bluetooth bugs it cannot be turned on, if others want flash files and stock firmware for k520, just let me know, thanks.
Click to expand...
Click to collapse
Hi! Sorry for offtopic!
Could you please PM me the link on AOSP extended image which you installed. Thank you!
Hello! Did somebody managed to install GCAM to Lenovo S5? I'm trying and I can;t do this, magisk modules are not loading...
so far I've used 2 alternative rom and works fine, aosp & octopus os, especially octopus os
I need some help..
Did anyone had lenovo s5 persist.img..
I lost my persist afer flashing global rom.208st via qfil..
I check the rom has no persist.img
Please visit to https://youtu.be/wbpV59kutJM for tutorial flash and upgrade Lenovo S5 in YouTube
hello guys, i always get into download mode,after press reboot system (twrp), any solution for my problem ?
has anyone achieved unlocking bands in this phone?
Please port miui 11 9.10.30 mi-room pie 9.0 redmi note 4x SD625 to lenovo S5.
https://megaroms.net/miui-11-9-10-30-stable-port-for-redmi-note-4-4x/
https://sourceforge.net/projects/miui-ports.whats-new.p/files/mido/miroom/
After unlocking bootloader, is there anyway to remove the hideous "software can't check for corruption" warning? Thanks.
---------- Post added at 01:44 AM ---------- Previous post was at 01:39 AM ----------
Suryo75 said:
hello guys, i always get into download mode,after press reboot system (twrp), any solution for my problem ?
Click to expand...
Click to collapse
This means no rom is installed in your phone. Either you accidentally wipe system in twrp, or the rom is corrupted.
Download the deodexed stock rom below and flash with twrp. Should fix your problem.
https://drive.google.com/open?id=13tRqo5eSpRiVJwKiA-iSj2GyIF353ATQ
jychung93 said:
After unlocking bootloader, is there anyway to remove the hideous "software can't check for corruption" warning? Thanks.
---------- Post added at 01:44 AM ---------- Previous post was at 01:39 AM ----------
This means no rom is installed in your phone. Either you accidentally wipe system in twrp, or the rom is corrupted.
Download the deodexed stock rom below and flash with twrp. Should fix your problem.
https://drive.google.com/open?id=13tRqo5eSpRiVJwKiA-iSj2GyIF353ATQ
Click to expand...
Click to collapse
thank you i'll try
Could you plz make tutorial about getting back to stock unroot...thx
Twrp gone
Hello sir thank you for this wonderful tutorial,
But I have a problem , after booting to TWRP , then boot to system after that when I try to go back to recovery mode TWRP , twrp is gone , stock recovery back
EDIT:SOLVED -- READ BELOW:
I finally got it flashed by following a few guides here which I will link, and try to break it down easier for someone else to come across and follow. I thought I bricked my phone (flashed LineageOS then rebooted, phone did not show anything on screen, full black screen) but after following a few guides I got it solved.
If you get bricked, or just want to follow a clean perfect install, please start below (Skip to step 2 if you are starting fresh, if you have soft-bricked your device start from step 1)
1. Bricked it and had to execute QDLoader 9008 fix again.
Tutorial is easier than it looks, do not fear, if you have soft-bricked your device and see a black screen, go ahead and go through the qdloader brick solution.
2. From factory recovery updated to Version WW-16.1220.1909.193.
If you have started fresh, I would highly recommend updating to the more updated firmware first. For me this worked, and I suggest updating to get a more current kernel, which may play better with Lineage OS install. To install a newer stock firmware linked above, download the ~2GB Firmware above, and save it to your Minimal ADB / Fastboot folder. Power off your device, after it has been successfully restored (if you bricked it) or you want to start off fresh and get the install right the first time. With your device powered off, Hold Volume UP and then Hold Power Button until the Fastboot menu appears. Use your volume keys to select Recovery, then press Power button to enter the STOCK Recovery (we are still on stock firmware with stock recovery). When in stock recovery select install from ADB. We are going to push the install via ADB (I tried dragging the firmware to the internal and selecting install ZIP and that didnt work).
Go into your Minimal ADB / Fastboot folder on your computer and open command prompt by holding Shift+Control and Right clicking and then selecting open command prompt here.
Now, enter the following command in the command prompt and hit enter:
adb devices
This command will show if any fastboot device is connected. If it doesn’t show, then please check the drivers are installed properly and try again.
If your device is listed, then type the command given below and press enter:
adb sideload File_name.zip
^^This will be the ~2GB Firmware file downloaded above
Wait until the installation process completes.
Once the installation process is complete, restart your device.
Done. You have successfully upgraded the Asus ZenFone 6 to the newer firmware, please continue.
3. Downloaded OTA 16.1220.1909.193 to 16.1220.1909.194, renamed it to UL-ASUS_I01WD-ASUS-16.1220.1909.194-1.1.1-user.zip and placed into root of internal memory.
When I disconnected USB cable (or rebooted, not sure), I was prompted with update notification. I have updated it. Either way, reboot your device if you don't see the notification, and look in your notifications to see something saying: System Update Detected Proceed with Update - and select it and update.
4. Now that your phone is 100% Updated with the newest firmware, let's follow another guide I found here:
I assume you're on a fresh Android 9 stock ROM, or just finished restoring your phone with the Flashall_AFT.cmd from this tutorial.
You should at least boot once on the system, and disable any PIN or password to unlock your phone (hence putting a default password for the FBE).
Download the latest OFFICIAL TWRP.x.x.img (which we'll use to boot on it), and it's installer to install it later (TWRP.x.x.zip) if you want to use it.
LineageOS installation steps :
Reboot to bootloader (=fastboot mode), connect to your PC and boot on TWRP :
Command:
fastboot boot TWRP.x.x.img
Once on TWRP, you can see that we're on slot A (Menu > Reboot). Now go to wipe > factory reset and then wipe system (technically I suspect this only wipes slot A, but do it anyway, don't worry about the errors!)
Now go to Install > flash the newest official LOS_latest.zip. What happens here is that the LOS installer will flash LOS on the inactive slot (slot B in our case). And will also install the LOS recovery (on both slots it seems).
Reboot to recovery : your phone automatically switches slots and will boot the LineageOS recovery (Don't fear, we don't need TWRP right now, just go along with this step) on slot B.
On the LineageOS recovery, do factory reset (which seems to be a full /data format in fact, thus removing any previous encryption AND all your data on internal storage). If you want to use Magisk, go to the recovery's install menu and sideload it now
Use code:
adb sideload Magisk-v20.3.zip
Now reboot to system. It might take a while (one or 2 loops in my case), but your phone should boot, or in some cases will end up on LOS recovery asking for a 'factory data reset' (then do it and reboot again).
Once booted on your LOS rom, you can define a pin or password to lock your phone (that'll be the FBE decryption password).
Now if you want to use TWRP, reboot to bootloader and boot again on TWRP.img (step 1)
From TWRP > Install > flash TWRP.x.x.zip (that is, the TWRP installer). It installs on both slots by default. If you had installed Magisk, you have to flash it again (because anything modifying the boot.img - like the TWRP installer in our case - will erase it).
You can now reboot to system and enjoy LOS
Thanks for the nice documentation. I've recently also struggling with installing a custom ROM and this clears some things up.
Wanted to ask, if you also have the audio issue that 1) callers hear an echo of themselves, and 2) the bottom speaker is active when receiving a call?
Thanks.
abprie said:
Thanks for the nice documentation. I've recently also struggling with installing a custom ROM and this clears some things up.
Wanted to ask, if you also have the audio issue that 1) callers hear an echo of themselves, and 2) the bottom speaker is active when receiving a call?
Thanks.
Click to expand...
Click to collapse
Haven't actually put my sim in yet to make calls, will let you know later today, sorry about the delay!
I had previously attempted this a number of months ago, and managed to soft brick my Zenfone 6 several times, eventually kind of giving up and just using the stock firmware.
I tried again back on Memorial Day in the US. This time around, I bricked it hard. Could not get device to power on in any fashion. PC would not "see" USB connection at all.
I returned it to ASUS for service, and they've charged me a little over $200 to repair it. The only problem they noted was, "Device is rooted/unlock". So I have no way of knowing if their diagnosis is based on actual inspection of the device, or if they're just replacing the SOC on the basis that I used their official bootloader unlock tool, thus registering my phone's S/N.
Just a little caveat emptor for anyone attempting to use this guide. I was able to get TWRP to load, and succesfully updated the stock firmware, but any and all attempts to load the Lineage image failed.
Eventually one of them soft bricked my phone as before, and I think my mistake was interrupting the soft brick rewrite procedure by prematurely unplugging my phone from the PC.
I had a similar issue: Bricked and totally unresponsive phone (or so I thought until I realised the screen was flashing very faintly when I switched off the lights - I could only tell in the dark due to how dim the flashing on the display was) where de "Powered by Android" logo kept flashing for a millisecond and in a loop. None of the button combinations worked so I couldn't switch completely off, access recovery/fastboot, and my computer wouldn't recognise the phone when I connected it via USB. I ended up buying an EDL cable for deep flashing Qualcomm phones (€9) and within minutes I was back up and running. All solved.
~SilverLad~ said:
I had a similar issue: Bricked and totally unresponsive phone (or so I thought until I realized the screen was flashing very faintly when I switched off the lights - I could only tell in the dark due to how dim the flashing on the display was) where de "Powered by Android" logo kept flashing for a millisecond and in a loop. None of the button combinations worked so I could switch completely off, access recovery/fastboot, and my computer wouldn't recognize the phone when I connected it via USB. I ended up buying an EDL cable for deep flashing Qualcomm phones (€9) and within minutes I was back up and running. All solved.
Click to expand...
Click to collapse
Can you post a link to where you purchased the cable?
abprie said:
Can you post a link to where you purchased the cable?
Click to expand...
Click to collapse
I bought it from Amazon. The one I bought is out of stock now, but there are a lot of them available (from other brands/sellers). This one for example - is the one that most resembles the one I actually bought: https://www.amazon.es/ASHATA-tel%C3%A9fono-reparaci%C3%B3n-Adaptador-Engineering/dp/B086WZMFKW/ref=sr_1_18?__mk_es_ES=%C3%85M%C3%85%C5%BD%C3%95%C3%91&dchild=1&keywords=cable+edl&qid=1597417614&sr=8-18
Since the thread is already on topic, could I flash lineage os while being on a custom rom? I have Bliss ROM on partition A and stock on B. Is it possible to have both Bliss and Lineage in dual boot?
Also, maybe a little off topic, the partition A/B scheme was intended to be used as a dual OS boot like normal PCs? Because right now I can select A and boot Bliss, select B and boot stock, I don't get why the procedure for flashing Lineage OS is so convoluted(requires having stock both on B and A?!) since both partition seems to be standalone and separated from each other.
~SilverLad~ said:
I bought it from Amazon. The one I bought is out of stock now, but there are a lot of them available (from other brands/sellers). This one for example - is the one that most resembles the one I actually bought: https://www.amazon.es/ASHATA-tel%C3%A9fono-reparaci%C3%B3n-Adaptador-Engineering/dp/B086WZMFKW/ref=sr_1_18?__mk_es_ES=%C3%85M%C3%85%C5%BD%C3%95%C3%91&dchild=1&keywords=cable+edl&qid=1597417614&sr=8-18
Click to expand...
Click to collapse
Hey there, what's the process around using this cable?
vikashhero said:
Hey there, what's the process around using this cable?
Click to expand...
Click to collapse
The cable itself (on its own), doesn't seem to "do" anything, but is paramount in reaching the right area, in order to fix the problem by means of the appropriate instructions and files. I can't recall where I ended up getting the right instructions from - as I researched quite a bit, and did a lot of "trial an error" before getting it right - so I'm sorry but I can't refer you directly to them via link (so that whoever posted them originally gets the credit they deserve), but this is what I ended up doing (on a WINDOWS machine) based on said instructions:
DOWNLOADS:
- Qualcomm drivers: https://androidfilehost.com/?fid=11410963190603857508
- Firmware with scripts: https://androidfilehost.com/?fid=1395089523397969054
- Latest official ASUS firmware from the ASUS webpage (download and place it in a memory card)
- (If you don't already have it on your WINDOWS machine): download and install Microsoft Visual C++ 2010 Service Pack 1 Redistributable Package
PROCEDURE:
1- Install the Qualcomm drivers
2- Unpack the downloaded firmware containing the scripts
3- Place the memory card in the phone's slot (with the latest official ASUS firmware already in it)
4- Power off the phone by VolumeDown + Power buttons (keep them pressed for about <25 seconds)
5- Connect the phone to the computer via the EDL cable and press the button on the EDL cable (there was an extra bit on what to do with a archive from the drivers file if your computer doesn't recognise the port straight away, but it wasn't necessary in my case so I didn't keep that step/archive name in my notes... I'm afraid you will have to search for it like I did if you come across that issue).
6- Start update_image_EDL.bat script from the unpacked firmware
7- After the script in step 6 finishes, start script flashall_AFT.cmd
8- Start bootloader
9- Go to stock recovery mode and install the ASUS firmware from the memory card
X- (Instructions also suggested to repeat steps 8 & 9 again at this point - for a second time - but in my case it wasn't needed)
I hope this helps.
~SilverLad~ said:
The cable itself (on its own), doesn't seem to "do" anything, but is paramount in reaching the right area, in order to fix the problem by means of the appropriate instructions and files. I can't recall where I ended up getting the right instructions from - as I researched quite a bit, and did a lot of "trial an error" before getting it right - so I'm sorry but I can't refer you directly to them via link (so that whoever posted them originally gets the credit they deserve), but this is what I ended up doing (on a WINDOWS machine) based on said instructions:
DOWNLOADS:
- Qualcomm drivers: https://androidfilehost.com/?fid=11410963190603857508
- Firmware with scripts: https://androidfilehost.com/?fid=1395089523397969054
- Latest official ASUS firmware from the ASUS webpage (download and place it in a memory card)
- (If you don't already have it on your WINDOWS machine): download and install Microsoft Visual C++ 2010 Service Pack 1 Redistributable Package
PROCEDURE:
1- Install the Qualcomm drivers
2- Unpack the downloaded firmware containing the scripts
3- Place the memory card in the phone's slot (with the latest official ASUS firmware already in it)
4- Power off the phone by VolumeDown + Power buttons (keep them pressed for about <25 seconds)
5- Connect the phone to the computer via the EDL cable and press the button on the EDL cable (there was an extra bit on what to do with a archive from the drivers file if your computer doesn't recognise the port straight away, but it wasn't necessary in my case so I didn't keep that step/archive name in my notes... I'm afraid you will have to search for it like I did if you come across that issue).
6- Start update_image_EDL.bat script from the unpacked firmware
7- After the script in step 6 finishes, start script flashall_AFT.cmd
8- Start bootloader
9- Go to stock recovery mode and install the ASUS firmware from the memory card
X- (Instructions also suggested to repeat steps 8 & 9 again at this point - for a second time - but in my case it wasn't needed)
I hope this helps.
Click to expand...
Click to collapse
Hey buddy, I appreciate your reply. The cable is on its way but I got a bit fiesty and opened up the phone to short the two contacts. This did the trick for me, got me back into EDL mode, and I was able to flash the latest firmware. On that topic, I'm trying to find the most suitable firmware version to run LineageOS 17 on the phone. I grabbed Mauro's TWRP to temporarily boot into which allowed me to flash the latest Asus image from their site. I guell I'll just carry on from there.
vikashhero said:
Hey buddy, I appreciate your reply. The cable is on its way but I got a bit fiesty and opened up the phone to short the two contacts. This did the trick for me, got me back into EDL mode, and I was able to flash the latest firmware. On that topic, I'm trying to find the most suitable firmware version to run LineageOS 17 on the phone. I grabbed Mauro's TWRP to temporarily boot into which allowed me to flash the latest Asus image from their site. I guell I'll just carry on from there.
Click to expand...
Click to collapse
As far as I understand, that's pretty much what the cable does actually... I also came across that method along my research, but I didn't want to risk opening the phone up. Since you are in the "flashing state": be careful with some of the instructions out there - I flashed through TWRP as I have been doing all these years with other phones, following specific instructions for each ROM I've tried, and I had nothing but issues until I flashed through ADB. I still don't know why I was getting the "No OS" warning all the time despite flashing correctly from TWRP (contemplating the A/B partitions matter), but none worked...
~SilverLad~ said:
As far as I understand, that's pretty much what the cable does actually... I also came across that method along my research, but I didn't want to risk opening the phone up. Since you are in the "flashing state": be careful with some of the instructions out there - I flashed through TWRP as I have been doing all these years with other phones, following specific instructions for each ROM I've tried, and I had nothing but issues until I flashed through ADB. I still don't know why I was getting the "No OS" warning all the time despite flashing correctly from TWRP (contemplating the A/B partitions matter), but none worked...
Click to expand...
Click to collapse
Appreciated but I'm all sorted. I believe my pitfall was not using the copy-partitions .zip file detailed in the instructions. I had no idea that was a thing. Was extra careful this time and now I'm on the ROM I need.
I ****ing hate A/B partitioned phones, makes custom ROMs such a chore. Sort of getting fed up with phones in general but at least this is working well for now.
vikashhero said:
Appreciated but I'm all sorted. I believe my pitfall was not using the copy-partitions .zip file detailed in the instructions. I had no idea that was a thing. Was extra careful this time and now I'm on the ROM I need.
Click to expand...
Click to collapse
Happy to hear that Indeed be careful - this is a tricky phone...
vikashhero said:
I ****ing hate A/B partitioned phones, makes custom ROMs such a chore. Sort of getting fed up with phones in general but at least this is working well for now.
Click to expand...
Click to collapse
Same here. It was so easy to do the Samsungs "back in the day", and you always had ODIN as a fallback if things went south. But this "A/B" partition nonsense (as well as other useless changes they introduce every time they "upgrade" Android, or certain structure modifications every so often when a new phone comes out) are a pain in the butt! Changes clearly aimed at making things more annoying/difficult for us people who don't want standard/corporate/unnecessarily bloated phones... Actually (as a former Blackberry user) I was tempted to get one of these Android based Blackberrys (the KEY2), but I didn't in the end precisely due to the fact that the bootloader can't be touched, and it can be rooted...
vikashhero said:
Appreciated but I'm all sorted. I believe my pitfall was not using the copy-partitions .zip file detailed in the instructions. I had no idea that was a thing. Was extra careful this time and now I'm on the ROM I need.
I ****ing hate A/B partitioned phones, makes custom ROMs such a chore. Sort of getting fed up with phones in general but at least this is working well for now.
Click to expand...
Click to collapse
I want to switch to because the latest security update (August 2020) by Asus is soft bricking the phone for many users,
but I am seeing a few reports about some bugs (like the phone is stuck in the lineage boot symbol and cellular errors) in lineage os and also seeing few post with a lot of installation errors (like soft and total bricking) etc. and for me in developers options I'm not seeing the OEM and advanced boot options.(in my asus stock os) I just found out that I have to download the Unlock Boot loader apk separately from asus and install it using command prompt so I don't know how to proceed.
Can you please elaborate on how you actually did it with your Asus Zenfone 6(2019), I am a total noob in this and I also couldn't understand the partition a and b parts too.