Related
Just going to dump all the info I've found about this device into this thread. All the threads pertaining to this thread are in Russian and I can't read Russian, so this might be helpful to any English speaking owners of this tablet.
Special thanks to Telegram user @SSDD_1744 (don't know your XDA/Reddit user, I'm sorry) for basically spoonfeeding me all these instructions!
WARNING: If you need to flash to stock for whatever reason, be sure to download a image file specific to your country. If you don't, you'll hard brick your device that can only be fixed QPST (supposedly).
Rooting:
(Tested on 5.0.2)
Install KingRoot. Let it root your device.
Install Super-SU Me, to get rid of the bloatware that comes with KingRoot.
Installing Xposed:
I used Flashify to flash TWRP. Be sure to flash the right version though (2.8.7.7 v2) or else you won't be able to mount cache.
Then download Xposed (version sdk21 ARM) and flash it.
WARNING: Flash v1 of the modded TWRP and you won't be able install any apps after flashing Xposed.
Unbricking:
Still working on it. Downloaded QPST but have not been able to get QPST 2.7 to read the tablet.
Links:
Discussion:
https://translate.googleusercontent...690491&usg=ALkJrhiWSlkbZ-tUofZx68NPSGIv8pjIPA
Root:
https://translate.googleusercontent...JrhhQszcRvUo8HILThvz57JmsLj4L9g#entry44556703
https://translate.googleusercontent...JrhiCt__6apcRhk-gtcBExYJCnC9nGQ#entry41676452
Instructions for obtaining the rights to Ruth phones / tablets.
Tested on Android 4.4+
perhaps this algorithm works on Android 5+, I have no way to verify
All transactions with their phones / tablets are performing at your own risk !!!
To get started, read this post from start to finish and only then proceed to action!
Introduction
This instruction is written based on my own experience obtaining root on their plates, and then on the Xperia M2, bought plemyashki. For instructions attached versions of applications that were relevant at the time, the new version can download the relevant topics on the forum, there will find all information on how to work with the proposed programs and algorithms for their actions (links to topics added).
For all the action with your phone / tablet you are responsible for yourself!
Download all the necessary tools to obtain Root (of instructions / topics on the forum), obespechte for phone / tablet access to the Internet (Wi-F / mobile data) and let the phone settings / tablet installation from unknown sources.
Needed Downloads
KingRoot_V4.5.0B202.apk (6.76 MB)
Me_5.9.apk-SuperSU (9.07 MB)
V2.49 Beta.apk SuperSU (5.63 MB)
eu.chainfire.supersu.pro.205.apk (52,88 KB)
Next in series:
1. Install KingRoot .
Get Ruth's right, in the device may reboot.
2. Set SuperSU-Me, .
Run the grantor, the program deletes KingRoot and Chinese KingUser with replacement SuperSu.
Remove the longer SuperSu-Me the desired program.
3. Obnovyaem SuperSu to the latest version. Then set PRO-key .
Installing Pro-key Optionally !!! Use Cases SuperSu without installing key .
4. Open SuperSu and on-demand update binary SU normal way. After a successful update, confirm the request to restart.
5. To make sure that everything is done correctly, check the correct installation and operation of Ruth (mount the system partition on the record), I used the Root Checker Pro and Root Explorer , respectively.
The output is a complete rut without kitayschiny with SuperSu Pro. We use and enjoy
Click to expand...
Click to collapse
Unlocking bootloader (haven't tried this):
https://translate.googleusercontent...Jrhh6g4wI-8Hb_LzAcPnIUxYvWNzZ0A#entry46711087
Stock firmware:
https://translate.googleusercontent...?s=&showtopic=703414&view=findpost&p=45272695
Damn, development has really boomed on this little tablet! Finally got it back after a few months (I sent it into Asus to repair it for me).
Stock ROM:
https://www.asus.com/ru/Tablets/ASUS_ZenPad_80_Z380KL/HelpDesk_Download/ (I can't get the English version to load, delete the /ru/ and you'll be redirected to the English site)
https://www.asus.com.cn/Tablets/ASUS_ZenPad_80_Z380KL/HelpDesk_Download/ (Chinese site)
==== REMEMBER TO DOWNLOAD THE CORRECT COUNTRY OR YOU'LL BE BRICKED) ====
https://yadi.sk/d/b1NMLXHBsNV8C (latest software for the worldwide model)
[http://4pda.ru/forum/index.php?showtopic=703414&st=320#entry50270292]
http://4pda.ru/forum/index.php?showtopic=703414&st=200#entry49389176 (Asus Flash Tool and stock ROM v4.8.2 WW [WorldWide])
Unlocking bootloader:
http://4pda.ru/forum/index.php?showtopic=690491&st=1280#entry48200665 (use fastboot oem device-info to check if it's unlocked)
Root:
http://4pda.ru/forum/index.php?showtopic=690491&st=580#entry44778545 (KingRoot - you'll need a 4PDA.ru account to download this)
http://4pda.ru/forum/index.php?showtopic=690491&st=1280#entry48185323 (last section of the post)
CM13:
http://get.cm/?device=P024&type=nightly
https://vasy.ru/CM13/
http://forum.xda-developers.com/android/help/asus-zenpad-8-z380kl-custom-rom-t3370277
http://forum.xda-developers.com/android/development/kernel-asus-z380kl-p024-kcal2-t3405595 (Kernel)
Recovery:
https://vasy.ru/TWRP/P024/
http://4pda.ru/forum/index.php?showtopic=690491&st=1220#entry48094504 (TWRP 2.8.7.0)
http://forum.xda-developers.com/android/help/asus-zenpad-8-0-z380kl-bootloop-t3373051
Guides:
http://4pda.ru/forum/index.php?showtopic=690491&st=1280#entry48185323 (this has a lot of instructions: root, recovery, boot partition restore, adb drivers etc.)
http://forum.xda-developers.com/android/help/asus-zenpad-8-0-z380kl-bootloop-t3373051 (this has a bunch of files, Resurrection Remix [I haven't tested it yet tho], and instructions on getting out a bootloop)
http://4pda.ru/forum/index.php?showtopic=690491&st=1640#entry49724823 (flashing stock software)
If you want to open the engineering menu, type " * # * # 4636 # * # * "
To boot into fastboot, restart/turn on the device and hold volume up. It'll pop you into a menu with three options.
To boot into recovery, from the fastboot screen (three options), use the volume buttons and navigate to the second option "factory reset" and hit power to confirm. It'll boot into recovery.
=====================================================================================
Recommended way to flash ROMs:
1) Download TWRP. Use adb to boot (NOT flash) into TWRP. Flash ROM there.
2) use KingRoot to root. Use Flashify to flash the ROM.
======================================================================================
If you want to go look up some more info or guides, go here:
http://4pda.ru/forum/index.php?act=...=rel&subforums=0&query=z380kl&forums=570&st=0
and use GTranslate to translate the page. The first page is the earliest posts with the keyword, the last page are the latest post.
please add these ROM's for this Device:
Ressurection Remix:
https://www.androidfilehost.com/?w=files&flid=121811
AICP 12.1:
https://www.androidfilehost.com/?w=files&flid=136181
The latest Official ROM P024 model:
http://dlcdnet.asus.com/pub/ASUS/Ee...ser.zip?_ga=1.109506565.1670552787.1483182775
ZenPad 8 Z380KL Firmware: V5.9.0.0 (WW SKU version only)
Improved Item:
1. Update Google security patch
2. Support unlock tool
9008 brick info:
https://4pda.ru/forum/index.php?showtopic=643084
Pertaining to p024:
https://4pda.ru/forum/index.php?showtopic=643084&st=5740
https://4pda.ru/forum/index.php?showtopic=643084&st=3660 (page 179 - 180, 183 - 185 discusses the files needed to unbrick and how you would - CTRL + F Russ and read the people who quote him)
How I bricked: https://4pda.ru/forum/index.php?showtopic=703414&st=180#entry49329798
https://4pda.ru/forum/index.php?showtopic=690491&st=1420#entry48527044 (unbricking files - dead link though)
https://4pda.ru/forum/index.php?showtopic=703414&st=140 (discussing how to fix using the images from the dump)
I see that Lineage OS is supported on Z380KL. However, I found the wiki spec showing Snapdragon 410, but I found Z380KL in Asia with Snapdragon 615. Before I commit, I'd like to know if anyone knows whether LineageOS is fully compatible with Z380KL with Snapdragon 615 chipsets? Thanks.
Special thanks to @a350tv for helping me comb through 4PDA - this process would've been a lot slower or just wouldn't have happened if he hadn't offered to translate guides and download links to me. So most of the credit goes to him.
Flashing TWRP on 6.0.1 (Sept 1, 2016 patch):
1) grab your drivers (W10: boot into "no driver signature verification mode" to install the drivers needed for fastboot)
https://drive.google.com/open?id=1cGcoDCvmTxfXWNTG0iOXHw1WScmYBrKS
2) turn on debugging
3) type in "adb devices", verify that your computer sees your tablet (if you don't have ADB/Fastboot, get https://forum.xda-developers.com/showthread.php?t=2317790)
4) type in "adb reboot bootloader"
5) you'll see three options: 1. Enter SD DL mode, 2. Factory Reset, 3. Exit update mode
6) type in "fastboot devices", verify that your computer sees your tablet
7) grab your TWRP file (http://vasy.ru/TWRP/P024/) and type in "fastboot flash recovery [replace w/ location of the TWRP file].img"
8) once it says "finished", click factory reset mode (use volume buttons to navigate, power button to enter)
9) it should reboot into TWRP, slide to allow modifications
10) Boom, TWRP is installed.
OPTIONAL, BUT HELPS TO KEEP TWRP INSTALLED: Flash Magisk.
That way, stock recovery won't overwrite TWRP when you reboot.
IF YOU WANT TO KEEP TWRP BUT DON'T WANT Magisk:
1) After first boot into TWRP, turn off tablet.
2) Then turn on and hold Volume Up + Power. That will boot you into Bootloader Mode.
3) Go into factory reset and it should boot you into TWRP.
Now, it's safe to boot into the OS.
(TL;DR: Boot into TWRP twice before booting into the OS or else stock recovery will overwrite TWRP.)
Flashing LineageOS:
1) DL LOS from https://download.lineageos.org/P024
2) DL GApps from http://opengapps.org/ (choose 7.1)
3) boot into TWRP
4) go into Wipe, slide to wipe
5) go to Install, click on LOS file > add to queue, click on Open GApps file > add to queue, flash
6) wait til it's done, click "reboot"
7) wait a while (took mine 3 or so minutes to boot)
8) enjoy!
My GDrive folder with all files needed (except ROM and GApps)
https://drive.google.com/open?id=0BzJ-WWaQYXttTkttdHNELVBEc2M
To do:
Use this tutorial to backup all my partitions, just in case I get bricked yet again.
https://forum.xda-developers.com/showthread.php?t=2450045
Links to unbrick device via Asus FlashTool
Links to service ROMs (for use with AFT)
Add original links from 4PDA
ROMs
LineageOS: https://download.lineageos.org/P024
AICP: https://saki-sss.blogspot.com.by/2016/12/z380k-aicp-121.html
Resurrection Remix: https://androidfilehost.com/?w=files&flid=121811
(made by https://androidfilehost.com/?w=profile&uid=457095661767100043, found from http://andmem.blogspot.jp/2016/05/asus-zenpad-8-z380kl-root-rom.html#chapter-19) - abandoned?
seities said:
I see that Lineage OS is supported on Z380KL. However, I found the wiki spec showing Snapdragon 410, but I found Z380KL in Asia with Snapdragon 615. Before I commit, I'd like to know if anyone knows whether LineageOS is fully compatible with Z380KL with Snapdragon 615 chipsets? Thanks.
Click to expand...
Click to collapse
probably not. I think it's only compatible with the SD 410.
xDark_ said:
Special thanks to @a350tv for helping me comb through 4PDA - this process would've been a lot slower or just wouldn't have happened if he hadn't offered to translate guides and download links to me. So most of the credit goes to him.
Flashing TWRP on 6.0.1 (Sept 1, 2016 patch):
1) grab your drivers (W10: boot into "no driver signature verification mode" to install the drivers needed for fastboot)
https://drive.google.com/open?id=1cGcoDCvmTxfXWNTG0iOXHw1WScmYBrKS
2) turn on debugging
3) type in "adb devices", verify that your computer sees your tablet (if you don't have ADB/Fastboot, get https://forum.xda-developers.com/showthread.php?t=2317790)
4) type in "adb reboot bootloader"
5) you'll see three options: 1. Enter SD DL mode, 2. Factory Reset, 3. Exit update mode
6) type in "fastboot devices", verify that your computer sees your tablet
7) grab your TWRP file (http://vasy.ru/TWRP/P024/) and type in "fastboot flash recovery [replace w/ location of the TWRP file].img"
8) once it says "finished", click factory reset mode (use volume buttons to navigate, power button to enter)
9) it should reboot into TWRP, slide to allow modifications
10) Boom, TWRP is installed.
OPTIONAL, BUT HELPS TO KEEP TWRP INSTALLED: Flash Magisk.
That way, stock recovery won't overwrite TWRP when you reboot.
IF YOU WANT TO KEEP TWRP BUT DON'T WANT Magisk:
1) After first boot into TWRP, turn off tablet.
2) Then turn on and hold Volume Up + Power. That will boot you into Bootloader Mode.
3) Go into factory reset and it should boot you into TWRP.
Now, it's safe to boot into the OS.
(TL;DR: Boot into TWRP twice before booting into the OS or else stock recovery will overwrite TWRP.)
Flashing LineageOS:
1) DL LOS from https://download.lineageos.org/P024
2) DL GApps from http://opengapps.org/ (choose 7.1)
3) boot into TWRP
4) go into Wipe, slide to wipe
5) go to Install, click on LOS file > add to queue, click on Open GApps file > add to queue, flash
6) wait til it's done, click "reboot"
7) wait a while (took mine 3 or so minutes to boot)
8) enjoy!
My GDrive folder with all files needed (except ROM and GApps)
https://drive.google.com/open?id=0BzJ-WWaQYXttTkttdHNELVBEc2M
To do:
Use this tutorial to backup all my partitions, just in case I get bricked yet again.
https://forum.xda-developers.com/showthread.php?t=2450045
Links to unbrick device via Asus FlashTool
Links to service ROMs (for use with AFT)
Add original links from 4PDA
Click to expand...
Click to collapse
Thanks for the tutorial, I had already dared to flash twrp recovery before you wrote this tutorial...
I believe my bootloader is still locked. And I could not reproduce/ write exactly what I did. But, in my case, just for information, when I want to go back into twrp, I can boot into bootloader (power volume up) and then option 2 reset the device gives me the twrp... I am not sure if that is how you get it, but for me, I still had twrp.
I think i will install magisk after reading your post.
jutphaas said:
Thanks for the tutorial, I had already dared to flash twrp recovery before you wrote this tutorial...
I believe my bootloader is still locked. And I could not reproduce/ write exactly what I did. But, in my case, just for information, when I want to go back into twrp, I can boot into bootloader (power volume up) and then option 2 reset the device gives me the twrp... I am not sure if that is how you get it, but for me, I still had twrp.
I think i will install magisk after reading your post.
Click to expand...
Click to collapse
I don't think unlocking the BL is necessary for flashing LOS. But yes, that's how I get into TWRP as well.
Hello I'm new in the forum and I write from Italy, yesterday unfortunately I had the brilliant idea to downgrade my Asus z380kl through ADB, Fastboot and TWRP from pc so far so good, I go to flash the new rom and gives me error, I try to restore the backup here too error result? Tablet locked the only way to make it recognize to the PC is with ASUS FLASH TOOL ROM problem in format.raw unobtainable not even on the Russian site. Any good soul has the possibility to let me download it? Thanks, Sorry English but it is a translation of the very useful Google translate.
pucci2 said:
Hello I'm new in the forum and I write from Italy, yesterday unfortunately I had the brilliant idea to downgrade my Asus z380kl through ADB, Fastboot and TWRP from pc so far so good, I go to flash the new rom and gives me error, I try to restore the backup here too error result? Tablet locked the only way to make it recognize to the PC is with ASUS FLASH TOOL ROM problem in format.raw unobtainable not even on the Russian site. Any good soul has the possibility to let me download it? Thanks, Sorry English but it is a translation of the very useful Google translate.
Click to expand...
Click to collapse
Can you still access fastboot, then at least you can flash twrp as described before in this thread and install from twrp lineageos p024 (lineage-14.1-20180105-nightly-P024-signed.zip) and Open gapps to get google playstore etc , select Arm, (not 64) then version 7.1, then Pico would work.
If you have twrp, you at least can still use your asus... I have found no way to flash original stock... stock must not be flashed from twrp.
Since you mention twrp already used, you can try: turn your device off, then press volume up then the bootloader menu comes, select 2: reset to enter twrp(where it says reset. if you had flashed twrp, that is how you can get into twrp) from there, install lineage os and gapps from micro sd card
My rom is MMB29M.WW_P024-V5.9.4-20170613
xDark_ said:
OPTIONAL, BUT HELPS TO KEEP TWRP INSTALLED: Flash Magisk.
That way, stock recovery won't overwrite TWRP when you reboot.
Click to expand...
Click to collapse
I assume this is on stock rom ? What version of magisk would work? I found I can be back at stock with my twrp backup so ..
But magisk 15.3 zip failed to install on stock-
I also used supersu v82 working on stock, or lineageos.
Would you know what magisk works on lineageos?
I like the exsd extension of magisk so I would like to try it on this device, either stock or lineageos
jutphaas said:
I assume this is on stock rom ? What version of magisk would work? I found I can be back at stock with my twrp backup so ..
But magisk 15.3 zip failed to install on stock-
I also used supersu v82 working on stock, or lineageos.
Would you know what magisk works on lineageos?
I like the exsd extension of magisk so I would like to try it on this device, either stock or lineageos
Click to expand...
Click to collapse
Yes it was. I flashed 15.2 on both stock and LOS. I've heard of some issues with 15.x so you can try .2 or 14.x.
pucci2 said:
Hello I'm new in the forum and I write from Italy, yesterday unfortunately I had the brilliant idea to downgrade my Asus z380kl through ADB, Fastboot and TWRP from pc so far so good, I go to flash the new rom and gives me error, I try to restore the backup here too error result? Tablet locked the only way to make it recognize to the PC is with ASUS FLASH TOOL ROM problem in format.raw unobtainable not even on the Russian site. Any good soul has the possibility to let me download it? Thanks, Sorry English but it is a translation of the very useful Google translate.
Click to expand...
Click to collapse
What error was given? What do you see when you connect it to a computer? What does "tablet locked" mean? Would help if you gave some pictures too.
I'm currently in the process of getting the RAW files/service ROMs for AFT but I don't have an ETA on when I'll be able to get that.
No on the tablet I have not installed TWRP and no other recovery.When I go into the original recovery of the tablet there is always the screen with the lock closed at the bottom right and there is no way to show it to the PC even with adb sideload, l 'only program that recognizes me the tablet is Asus flash tool, however, as I have already written the damn ROM in RAW format is untraceable.
pucci2 said:
No on the tablet I have not installed TWRP and no other recovery.When I go into the original recovery of the tablet there is always the screen with the lock closed at the bottom right and there is no way to show it to the PC even with adb sideload, l 'only program that recognizes me the tablet is Asus flash tool, however, as I have already written the damn ROM in RAW format is untraceable.
Click to expand...
Click to collapse
Does it respons to adb devices of fastboot devices in this stage?
no, it is not recognized
(I wrote the 'new' version of rooting out of memory / conjecture, it should not do irreversible harm to your tablet, however, always apply common sense and proceed with caution. Caveat - I am neither a developer nor software engineer.)
'New' version of rooting procedures can be carried out with relative ease now that @krustymars has done the heavy lifting and ported TWRP to Teclast X16Plus; applies to both native android 5.1.1 and Remix 2.0.
In his write-up, it wasn't mentioned that TWRP can only be installed if X16 Plus's bootloader is 'OEM unlocked' and ROM will only boot if X16 Plus's boot image is patched (insecured), after the flashing of TWRP.
To unlock is not difficult (fastboot oem unlock), but it will also wipe /data of the ROM (making it unbootable too?). Question mark here as I am uncertain whether this action will render the ROM unbootable or not. For the sake of not doing double jobs, we assume it will.
The third condition for the ROM to first boot properly after flashing is the original recovery must be present (again I am not sure if a patched boot image will do the trick; for the same reason above, we assume it won't)
Therefore the only way out is to ensure the bootloader is not re-locked after the flashing of ROM, for us to be able to flash an effective TWRP AFTER the ROM has finished its first boot.
I believe the above are the main reasons why @stratos7 faced difficulties when intending to root via TWRP.
A simple and rudimentary step by step guide as below (you will LOSE ALL DATA in the tablet, backup all your important stuffs before proceeding):
1) Rename the ROM's original recovery.img to recovery.org. Copy krustymars' TWRP over and rename it recovery.img
This is to ensure that after the flashing, the reboot process will fail and the script will not re-lock the bootloader
2) Flash the ROM as per normal (enter DNX Fastboot by pressing vol+ vol- and power button concurrently, then use Intel Platform Flash Tool Program to flash).
3) After a successful flash, the tablet will enter recovery (TWRP) first time during reboot, and failed. It will be stuck in a boot loop (showing TWRP error).
4) Force shut it by pressing the power button for 10-15secs.
5) Enter fastboot by pressing vol- and power button concurrently.
6) Flash the orginal recovery via adb fastboot.
fastboot flash recovery recovery.img
7) Reboot normally and the ROM will load properly (1st successful boot will take a while; as long as you see the Remix OS logo flashing, all are good).
8) 10x click on Build Number to activate Developer's Menu
9) Activate USB debugging
10) Reboot into fastboot by typing
adb reboot fastboot
11) Check to ensure that bootloader is still unlocked.
12) Flash krustymars' TWRP
fastboot flash recovery TWRP_TeclastX16Plus_by_krustymars.img
13) Flash patched boot image
fastboot flash boot boot.img
14) Choose Recovery Mode, ensure X16 Plus boots into TWRP fine
15) Reboot into ROM from TWRP
16) If you are satisfied that all are fine after rebooting into the ROM, and have copied the latest downloaded SuperSU.zip flashable file into the Internal or Micro SD memory, you can either adb reboot fastboot or shutdown the tablet and vol- power button into fastboot, and then choose Recovery Mode from within fastboot to enter TWRP to flash SuperSU to get root.
Do note that you cannot update binaries within Android, you can update the SuperSU app though if a new version comes up in Play store, just not the binaries. If your binaries become outdated, you will need to flash the latest SuperSU.zip again via TWRP.
The necessary files (minus SuperSU, do grab that from Chainfire's site) - https://www.mediafire.com/?3blso8sjw4kb3e6
Once again, proceed with caution / common sense and the above shouldn't land you in any irreversible situation. All the best!
_____________________________________________________________________________________________________________________________
OLD METHOD
The below instructions for rooting Teclast X16 Plus originated from Teclast's forums. All credits go to the respective creator(s), I merely translated them to post here.
1) Download the standard rooting package from http://www.mediafire.com/download/nrez4ggzau1u8ax/Root.X16Plus.V1.zip
2) Download your corresponding edited boot image file and extracted build prop file (for either Remix OS 2.0 ver B2016062701 or Android 5.1 ver 1.07)
- for Remix OS http://www.mediafire.com/download/b6aazky2y9eqch7/Remix_OS_2.0.zip
- for Android 5.1 http://www.mediafire.com/download/zz40a8cgav385l3/android5.1.zip
3) Download and install Intel's tools and drivers in the order below - http://www.mediafire.com/download/p723or9hxip5eu8/Intel_Flash_Tools.rar
You can omit this step if these drivers are already installed.
- iSocUSB-Driver-Setup-1.2.0.exe
- IntelAndroidDrvSetup1.10.0.zip
- PhoneFlashToolLite_5.5.2.0_win32.exe
4) Download kingroot tool from below, copy the apk file to your X16 Plus and install. There is no need to run the installed app now.
5) Ensure USB debugging is switched on under developer options in your ROM
6) Unzip both the rooting package and your corresponding edited boot image and extracted build.prop files. Cut and paste the unzipped boot image and build prop files into the unzipped rooting package directory.
7) Launch command prompt and change directory to the unzipped rooting package directory
8) Connect your X16 Plus via USB
9) Type and enter - adb reboot bootloader
10) X16 Plus will reboot into fastboot mode
11) Type and enter - fastboot flash boot boot-root.img
12) Type and enter - fastboot reboot
13) X16 Plus will reboot into normal mode, wait for the bootup process to finish
14) Type and enter - su.bat
15) Run the previously install Kingroot app, Kingroot will prompt you to repair root privileges, allow it to do so.
16) Reboot your X16 Plus after the above repair and you will have full root access. If root access is still incomplete, run the above step 14) su.bat command again
Just one thanks cannot say how much grateful I am. THANKS. It work.
Thanks a lot Potatohead ! You rock !
I will try this instruction and post a feedback as soon as possible !
potatohead,
I have just finish to root my tablet. It's very easy and everything is fine.
Once again, thanks a lot ! :good:
great job !!
all are OK under win XP
Thx
Hi @potatohead , Hi @TrYkeR ,
I've just discovered a new firmware V1.07 for our X16 plus on the Teclast website (in the download section) . My tablet is running with the V1.04 version.
Do you know you to flash it, cause TeclastOTA is unable to ugrade it both with the Online mode ("undiscover new version") and the Local mode ?
Reno.
I'm using 1.07, I use a tutorial from their webside.
The big problem is download the firmware, their server sucks a lot. I use jdownload since chrome crash 2 times and do not recover the download
Firmware:
http://pan.baidu.com/s/1nvKVjnF
https://yadi.sk/d/TrUPzmkXsFrXJ (mirror)
here they talk about it:
http://techtablets.com/forum/topic/teclast-x16-plus-i-want-to-change-from-v-1-04-to-v-1-07/
I didn't find the post that I use, but was really easy, like paste the .img files into a folder, put teclast plus in "download mode", they called it diferent, and run an script (.bat)
Hi @TrYkeR,
Thanks for your prompt reply.
I searched for the tuto but I didn't find it too (I already have the V1.07 download). I do not want to do it by myself, i'm not enough confident.
If you find it...
Reno
renofaringite said:
Hi @TrYkeR,
Thanks for your prompt reply.
I searched for the tuto but I didn't find it too (I already have the V1.07 download). I do not want to do it by myself, i'm not enough confident.
If you find it...
Reno
Click to expand...
Click to collapse
I didn't found the exactly post I've use.
Was in this forum:
http://techtablets.com/forum/forums/teclast/general-discussion/page/1/
im new users teclast x16 plus .. is better remixos or android 5.1 firmware 1.0.7 (for drain battery etc..)
Hello friends,
I have the same question.... is better remixos or android 5.1 firmware 1.0.7?
Thanks a lot !!
Renew link
Potatohead, could you please post another link to root.x16plus.v1.zip?
Mediafire removed the file, nowhere else to be found (according to google...)
Thanks in advance!
So did anyone else happen to pick this up from tinydeal while they had it for $79? Not sure if it's arriving with 5.1 or Remix, but this is good to know.
Henk S. said:
Potatohead, could you please post another link to root.x16plus.v1.zip?
Mediafire removed the file, nowhere else to be found (according to google...)
Thanks in advance!
Click to expand...
Click to collapse
As you, I'm looking for this file to root my tablet.
Henk S. said:
Potatohead, could you please post another link to root.x16plus.v1.zip?
Mediafire removed the file, nowhere else to be found (according to google...)
Thanks in advance!
Click to expand...
Click to collapse
bja9 said:
As you, I'm looking for this file to root my tablet.
Click to expand...
Click to collapse
Guys, you can get it here
Link:
pan.baidu.com/s/1eSfpVW2
Password:
xc1u
---------- Post added at 05:20 AM ---------- Previous post was at 05:17 AM ----------
potatohead said:
The below instructions for rooting Teclast X16 Plus originated from Teclast's forums. All credits go to the respective creator(s), I merely translated them to post here.
...
Click to expand...
Click to collapse
I followed the instructions and flashed boot-root.img successfully, however I'm unable to run adb remount in su.bat
it says "remount of system failed: Permission denied", "remount failed"
any ideas?
btc002 said:
Guys, you can get it here
Link:
pan.baidu.com/s/1eSfpVW2
Password:
xc1u
---------- Post added at 05:20 AM ---------- Previous post was at 05:17 AM ----------
I followed the instructions and flashed boot-root.img successfully, however I'm unable to run adb remount in su.bat
it says "remount of system failed: Permission denied", "remount failed"
any ideas?
Click to expand...
Click to collapse
Tank you for the link to the file. It works fine for me !
Rooting in progress.
Did someone sucessfully installed Remix OS 3.0 or W10 ? (W10 i get acpi boot error :/)
I followed the instructions and flashed boot-root.img successfully, however I'm unable to run adb remount in su.bat
it says "remount of system failed: Permission denied", "remount failed"
any ideas?
Click to expand...
Click to collapse
me too...any ideas?
best regards
:good:
..
EDIT: included rough procedures for OEM unlocking, and updated link to recovery-verified.img (Sorry for uploading the wrong file ><)
Hi all bv9000 pro Users!
Recently I went on a journey to root this awesome rugged phone with one purspose: to remove that F*@(#&$ god awful loud annoying sound triggered by the OS when you use a camera app to take a picture + the boot startup sound (A bug blackview hasn't gotten around to fixing).
I successfully managed to port TWRP 3.1.1 from the Blackview bv8000 Pro and run it on the Blackview bv9000 Pro-f!
I've then managed to flash in Magisk to gain root access.
DISCLAIMER: I do not take responsibility for any bricked phones caused by the process, do so at your own risk (yadayadayada).
NOTE 1: Although I've got it running on the bv9000 Pro-F, this image should also work for the non-fullHD version, if someone can test this I'd be happy.
The link to the stock ROM (with the modified recovery img) can be found in the post below.
NOTE 2: No need to download anything other than what I've listed, Magisk is included in my custom recovery to circumvent the need to load the devices encrypted storage (or any other external storage) nothing stops you from mounting external usb storage.
What you'll need:
- USB Mouse (As there is no touchscreen input support, your device should have come with a usb-c otg cable so there's no problem here!)
- MediaTek SP Flash tools (I'd recommend the latest version) https://spflashtool.com/
- unlocked bootloader (You should be able to do this via the developer settings -> unlock OEM Bootloader)
EDIT: To unlock the boot loader, do the following:
1) Go to settings -> unlock OEM Bootloader (tick)
2) plug your device in (assuming you have ADB installed), use adb to access fastboot via. command prompt:
"adb reboot bootloader"
Then once the device is rebooted into fastboot mode
"fastboot oem unlock"
KEEP IN MIND THIS WILL REMOVE ANY FILES, so back them up
- I've done this with windows, but you should be able to repeat with linux no problems!
- A little patience
Pre-preparation:
First install any updates and back up your data (it's just easiest to use the google cloud backup as restoring becomes easy as pie, updating also fixes the setup wizard crashing on first setup). This is necessary because OTA updates cannot be performed with TWRP recovery, and flashing TWRP before doing OTA updates will flick the device into a recovery boot loop.
Install the SP Flash tools, and the MediaTek VCOM Drivers
(I won't link the specifics here, a quick google search should be able to help you, just note you might need to disable driver signature enforcement)
Two options for flashing:
1)
My Full Stock ROM already pre-prepared for flashing:
Patched ROM
No need for extra prep here! you should just be able to load the scatter
2)
My custom patched TWRP stock rom: recovery-verified.img
Blackiew's stock rom: stock rom
- Download the stock rom, backup the recovery-verified.img in the R06 folder, and then replace it with my custom patched TWRP stock rom (file name should be the same).
- Run "CheckSum_Gen.exe" once you replaced the file, it will generate the necessary checksum to allow SP flash tools to successfully flash recovery.
Once you've done with the pre-prep, switch off your device, take a deep breath and you're ready to go!
Steps!
1) Load up SP Flash Tools, select the android scatter file you've downloaded in the R06 folder
2) Select Download Only (I MEAN IT, FORMATTING WILL REMOVE YOUR IMEI AND RENDER THE PHONE USELESS)
3) Deselect everything but recovery (You only want to flash this)
4) Hit download
https://pasteboard.co/HkufwZZ.png
5) Hold volume up + power and plug in your phone, keep the volume up button held
6) very quickly the flash should be complete, and you should be greeted with a big ol' green tick to verify
https://pasteboard.co/HkuiTBB.png
7) Once you're done, remove your USB cable, plug in the OTG then we proceed to flash magisk
8) Hold power + volume up until you reach the bootloader, then use the menu to select recovery
9) You *should* be greeted with the TWRP recovery screen (Which is great success! )
DON'T PANIC IF YOU CANNOT USE THE TOUCH SCREEN, the kernel I've patched is missing this, seems the driver is different between touch screens, just plug in your OTG mouse to continue from here!
10) Use your mouse to first hit cancel, we don't need to decrypt the user data storage.
11) But oh no! it's all in Russian (no problem, Next step sorts that)
12) Use your mouse to navigate the menus as shown here to change to English! (or your preferred language) Change Language
13) Click install, then navigate up folder levels until you are in the root directory
14) scroll down and click on Magisk.zip, install it, allow it to install any apps as system apps (because this will then install to the system image, not the userdata)
15) reboot the phone (if it hasn't rebooted already)
16) You should be able to boot into your usual phones OS, if you don't see Magisk listed in your phone apps, just download it from here:
Magisk Manager
17) Congratulations! You should have complete root access :laugh::laugh::laugh:
Feel free to express your thanks, or list any problems you have, but keep in mind my studies take all my life, so I may not be able to help with all the problems you have
Congrats! Would it work on the BV9000 HD version?
Hi!
From what I've seen they both run the helio p25 chip
(Just a difference in RAM size) so it should.
You're more than welcome to try.
Just keep a backup of the original ROMs recovery. If something goes wrong during the boot to recovery you can easily re flash
hi i tried both optinos but they didn't work for me
I tried the first and the second options and it was showed me same error:
ERROR: STATUS INSUFFICIENT_BUFFER(0XC0010007)
I tried download only, format all and download, if i install original ROM its installing without problems!
In settings-> developer options -> OEM unlocking is enabled
can someone give me tips if I'm doing something wrong. thanks
My phone is Blackview BV9000PRO-F
Hello,
i have the blackview 9000 pro Hd (not full hd)
i first tried your prepared patched rom = not working (get erorrers in step 6)
then i chose step 2 and i was thinking to use the stock rom from the NOT full hd rom
now i get a green screen from the flashing: but after rebooting in recovery nothing happens, just normal reboot then
perhaps this is not so clair for me:
- Download the stock rom, backup the recovery-verified.img in the R06 folder, and then replace it with my custom patched TWRP stock rom (file name should be the same).
- Run "CheckSum_Gen.exe" once you replaced the file, it will generate the necessary checksum to allow SP flash tools to successfully flash recovery.
the file name you posted here " My custom patched TWRP stock rom: recovery-verified.img" is ramdisk-recovery.img
i replaced the ramdisk-recovery.img... it is not clair need to replace recovery-verified.img to?
>I tried the first and the second options and it was >showed me same error:
>ERROR: STATUS INSUFFICIENT_BUFFER(0XC0010007)
> tried download only, format all and download, if i install >original ROM its installing without problems!
>can someone give me tips if I'm doing something wrong. >thanks
>My phone is Blackview BV9000PRO-F
Hi, you need to unlock the OEM bootloader, if this is still locked it will prevent the flashing of custom ROMS.
I might've missed this step, will update post as necessary.
>
dingsje said:
Hello,
>i have the blackview 9000 pro Hd (not full hd)
>i first tried your prepared patched rom = not working >(get erorrers in step 6)
>then i chose step 2 and i was thinking to use the stock >rom from the NOT full hd rom
>now i get a green screen from the flashing: but after >rebooting in recovery nothing happens, just normal >reboot then
>perhaps this is not so clair for me:
>- Download the stock rom, backup the recovery->verified.img in the R06 folder, and then replace it with >my custom patched TWRP stock rom (file name should >be the same).
>- Run "CheckSum_Gen.exe" once you replaced the file, >it will generate the necessary checksum to allow SP >flash tools to successfully flash recovery.
>the file name you posted here " My custom patched >TWRP stock rom: recovery-verified.img" is ramdisk->recovery.img
>i replaced the ramdisk-recovery.img... it is not clair >need to replace recovery-verified.img to?
Click to expand...
Click to collapse
Hi,
I've uploaded the wrong file, the uploaded file should be recovery-verified.img.
I'm uploading a new file and will correct the link now,
Please accept my apologies ><
hyperlethalvector92 said:
>I tried the first and the second options and it was >showed me same error:
>ERROR: STATUS INSUFFICIENT_BUFFER(0XC0010007)
> tried download only, format all and download, if i install >original ROM its installing without problems!
>can someone give me tips if I'm doing something wrong. >thanks
>My phone is Blackview BV9000PRO-F
Hi, you need to unlock the OEM bootloader, if this is still locked it will prevent the flashing of custom ROMS.
I might've missed this step, will update post as necessary.
Click to expand...
Click to collapse
I already did this step:
Enable developer options-> OEM unlocking is enabled
Is that enough for this MTK phone to be unlocked the bootloader ?
And tried the both options but the results are same.
I have been unlocking bootloaders on many phones but first time MTK phones. If i try with adb commands it recognize when is in the android with command adb devices and show my device but if I try reboot bootloader and check in device manager in windows its show its connected and drives are correct but if i try to show the devices, it doesn't show any device connected
Hi,
You need to install fastboot drivers once it's in bootloader mode,
then use fastboot, not adb.
"fastboot oem unlock"
Then follow instructions.
simply doing settings -> oem unlock won't unlock the bootloader, it allows you to do so later via. fastboot
Check the original post, I've added the extra instructions sorry about the confusion!
Thanks a lot. I finally succeeded to unlock the bootloader and root my phone and install the magisk.. I did without use your rom just I unlocked the bootloader and install your twrp file and after in the recovery mode i format the data and istall magic and i still have the last updated android.
I hope this it ill help to other people. Cheers
zlatkomas said:
Thanks a lot. I finally succeeded to unlock the bootloader and root my phone and install the magisk.. I did without use your rom just I unlocked the bootloader and install your twrp file and after in the recovery mode i format the data and istall magic and i still have the last updated android.
I hope this it ill help to other people. Cheers
Click to expand...
Click to collapse
I'm glad ^______^
Enjoy your rooted phone
I used this video to root my bv9000 pro hd
much easier than this above, i think it works to on bv9000 pro fhd
https://www.youtube.com/watch?v=c48ISLPjn4Q
Congratulations .... I need a tip,.
And, brother, thank you very much. Worked perfectly.
But first I would like to get you a tip ..
One of the main reasons I have done all this complicated process was to be able to disable the crap of the loud music that plays when the device is started.
I want complete silence at startup.
How do I disable this ****?
Code for Huawei mobile Wi-Fi e5577s-321
Pls help unlock my Huawei mobile Wi-Fi e5577s-321
Imei
860782038163889
TWRP looping after OTA update
My dear, the procedure worked very well, until an OTA update was downloaded.
You are now looping on TWRP. How do I get out of this?
:crying:
help!
i missed to run wireless software update,so ROM clashed.
How can i re-install custom ROM?
mackie_ma said:
help!
i missed to run wireless software update,so ROM clashed.
How can i re-install custom ROM?
Click to expand...
Click to collapse
Hi guys, lemme apologize for disappearing, life and whatnot!
For those stuck in a TWRP boot loop, simply restoring the original recovery then restarting the phone will be enough to fix the problem.
(Actually you really don't need TWRP after the phone is rooted, maybe I should update the guide?)
Many Thanks
First off, thank you for your hard work. Loved the "**** it we have an OTG cable let's use it" haha. It works fine for me.
Second, do you happen to know if someone has ported Oreo on our bv9000 ? Or do you know of any ETA ?
Thanks again,
Cheers
Anyone tried on the BV9000 Pro? Don't think mine is 'F' OR 'Fhd'.... I must have first model brought out...
Ugh.. Windows and Drivers?!?!
I keep getting Driver not Recognized in Windows 7 Pro X86.
I installed the latest vcom/usb drivers, in legacy also. No Go.
I installed from several other sources the drivers, including the Automatic Mediatek driver install. No Go.
So if anyone has a tip for me, please let me know because once more Windows is proving itself ridiculous. I can't even get to the storage of my phone. Did something change with a Windows Update that it's not allowed anymore?
I put my BV9000 Pro in OEM Unlock and USB Debugging. I backupped everything. My phone is ready for it. It's as ready as Amy having coitus with Sheldon for the first time.
Hello everyone, after struggling for a few hours I managed to finally disable force encryption in my phone (so that TWRP could backup the data partition).
I'd like to write a quick list of what I did in the form of a guide to unlocking the bootloader, installing TWRP and getting root with Magisk. I'm just a user, not a developer and this guide is brief, it's not a detailed tutorial and does not include trivial steps (like how to install drivers for your OS).
Warnings: Although small, there is always the chance this bricks your phone. I take no responsibilities.
This will factory reset your phone so back up everything before you start.
My phone is Lenovo S5 (K520) Global version (see screenshot) I don't know if this will work for other firmwares.
Prerequisites:
Install Phone, ADB and Fastboot drives. You can get ADB and Fastboot binaries from here:
https://forum.xda-developers.com/showthread.php?t=2588979
Download this archive:
http://www.mediafire.com/?4dcvzw1hdmzfn10
It contains all the files used in this guide.
Alternatively, download all the files used from their sources.
You will need an SD card or a USB flash drive with an OTG adapter.
Copy the following files to it:
A. "Disable_Dm-Verity_ForceEncrypt_12.16.2018.zip"
(Downloaded from http://forum.xda-developers.com/showthread.php?t=3817389 )
B. "Magisk-v18.0.zip"
(Downloaded from http://forum.xda-developers.com/showthread.php?t=3473445 )
C. (optional) "\stock\boot.img"
(Downloaded from the global firmware @ 4pda)
If you chose to use Micro SD card, you can insert it now.
Note: I know there is a way to push these files directly to TWRP from PC through USB instead of using SD Card/Flash drive but I've never tried it.
Lets start:
1. Go to 'Settings>About phone' and tap on "Lenovo version" several times until developer options are enabled.
2. Go to 'Settings>System>Developer options' and enable "OEM unlocking" (Note: for me this option was greyed out and I had to connect to wifi and wait for a minute or two).
Optional: Enable "USB debugging" if you wish to enter fastboot via ADB.
3. Turn off the phone and press and hold 'Volume down'+'Power' buttons until you see "fastboot mode" on the phone screen (alternatively, don't turn off the phone and instead enter fastboot mode via ADB (adb.exe reboot bootloader)).
4. Connect the phone to the PC via USB and open a command prompt in the location that you installed fastboot binary to.
Type (after each command press enter):
Code:
fastboot devices
To verify that the phone is recognized. And if it is type:
Code:
fastboot oem unlock
Now on the phone LCD navigate to "Yes" with volume buttons and press power to select it.
Your phone will factory reset, this will take a few minutes. Let it finish.
5. Put the TWRP image in your fastboot path. I used "recovery-twrp-3.2.3-crn-seoul(v3.2.3-1).img" downloaded from this URL:
https://forum.xda-developers.com/android/development/lenovo-s5-k520-twrps-t3863860
But I included 2 more files that I found (I did not try them).
6. Enter fasboot mode again and type:
Code:
fastboot flash recovery recovery-twrp-3.2.3-crn-seoul(v3.2.3-1).img
(Substitute "recovery-twrp-3.2.3-crn-seoul(v3.2.3-1).img" with the recovery filename of you choice)
7. If successful, disconnect the USB cable and enter Recovery mode, do not turn off or reboot the phone because upon restart the phone will revert to stock recovery (I.E. delete TWRP).
To enter Recovery mode press and hold 'Volume down'+'Power' buttons until you see "fastboot mode" and from there choose "Recovery mode" with the volume buttons and confirm with the power button.
(Alternatively, you can try holding 'Volume up'+'Power' to directly enter Recovery mode but I found it a little finicky)
8. In TWRP, swipe to allow changes. Press cancel when asked for a password to decrypt data.
If you chose to use a USB flash drive with an OTG adapter, connect it and mount it (Mount>usb-otg).
9. Go to Wipe>format data, type "yes" and confirm (if you have any data like installed apps, contacts etc., it will be deleted).
10. Go to Install and install "Disable_Dm-Verity_ForceEncrypt_12.16.2018.zip".
The files will be in (/external_sd/ or /usb-otg/).
11. Install "Magisk-v18.0.zip"
Important note: If you want to keep encryption (if you don't care if TWRP can't access /data/) and just obtain root, skip steps 9 and 10.
12. Reboot to system and wait for a few minutes for the initial setup.
If for some reason boot fails (nothing happens after 10 minutes) and you can still enter TWRP (hold 'Volume up'+'Power'), then you can revert the changes by restoring the stock boot image (TWRP>Install>Install image>boot.img - put a checkmark on "boot").
If this worked for you, please tell us by replying to this thread.
Thanks a lot man. This phone is a beast in quality/price when talking about hardware. Costs a bit more than 100€ and has the same hard than others at 180-200€ at least. Bad thing is software but with TWRP and root everything is possible . Just found what project treble is, amazing possibilities. Can't beliebe nobody replied yet to yor post. Its a great guide and you show all the sources from where your downloads come. As you said in another thread its better this way so people can trust your content more:
C4lculated said:
I also wanted to root but I didn't want to run a bunch of unknown programs (from XN Logos), so I managed to install TWRP and root with magisk. I wrote a guide on how to do it:
https://forum.xda-developers.com/ge...ide-lenovo-s5-k520-twrp-root-decrypt-t3882402
Click to expand...
Click to collapse
I am yet waiting for my Lenovo S5 to arrive but I will give this guide a try. I was about to follow XN logos (stupdroid) guide/software but I prefer yours. Just one question... have you checked whether the TWRP v3.2.3 (latest) from dmilz make proper working backups? Can I trust that a full backup will be loaded correctly after installing any unofficial ROM, to go back to stock if necessary? I made once the mistake of relying a TWRP and later I found out that one was ok for flashing but didn't create working backups. I asked him also the same question, but I guess you also tried yourself to make a backup and restore from it using TWRP.
Next step will be to flash an Android 8.1 or 9 GSI rom (did I already say I'm amazed by GSI/project treble roms? just found about them last days). I will update you about my luck following your guide
does anyone enable lte bands, 4 and 28?
just bought this phone, currently on shipping..
I'll first try with twrp + aosp 9 GSI
Hi man, have you upgrade to gsi
acost91 said:
Thanks a lot man. This phone is a beast in quality/price when talking about hardware. Costs a bit more than 100€ and has the same hard than others at 180-200€ at least. Bad thing is software but with TWRP and root everything is possible . Just found what project treble is, amazing possibilities. Can't beliebe nobody replied yet to yor post. Its a great guide and you show all the sources from where your downloads come. As you said in another thread its better this way so people can trust your content more:
I am yet waiting for my Lenovo S5 to arrive but I will give this guide a try. I was about to follow XN logos (stupdroid) guide/software but I prefer yours. Just one question... have you checked whether the TWRP v3.2.3 (latest) from dmilz make proper working backups? Can I trust that a full backup will be loaded correctly after installing any unofficial ROM, to go back to stock if necessary? I made once the mistake of relying a TWRP and later I found out that one was ok for flashing but didn't create working backups. I asked him also the same question, but I guess you also tried yourself to make a backup and restore from it using TWRP.
Next step will be to flash an Android 8.1 or 9 GSI rom (did I already say I'm amazed by GSI/project treble roms? just found about them last days). I will update you about my luck following your guide
Click to expand...
Click to collapse
Kindly drop the procedure am hitting brick with all the method i used .????????
Stock firmware lenovo k520
I have tried your method on ROM that is based on China and also globally, and TWRP was successfully installed, and I have also tried several Rom GSI, and only AOSP Extended is successful, but with Bluetooth bugs it cannot be turned on, if others want flash files and stock firmware for k520, just let me know, thanks.
Working on S5 Pro too?
Hi! Can it work on S5 Pro too? I really want to root this device and I don't find out a way to get this happening. Thanks!
Does this work for s5 pro l58041?
Thanks
B4ph0 said:
I have tried your method on ROM that is based on China and also globally, and TWRP was successfully installed, and I have also tried several Rom GSI, and only AOSP Extended is successful, but with Bluetooth bugs it cannot be turned on, if others want flash files and stock firmware for k520, just let me know, thanks.
Click to expand...
Click to collapse
Hi! Sorry for offtopic!
Could you please PM me the link on AOSP extended image which you installed. Thank you!
Hello! Did somebody managed to install GCAM to Lenovo S5? I'm trying and I can;t do this, magisk modules are not loading...
so far I've used 2 alternative rom and works fine, aosp & octopus os, especially octopus os
I need some help..
Did anyone had lenovo s5 persist.img..
I lost my persist afer flashing global rom.208st via qfil..
I check the rom has no persist.img
Please visit to https://youtu.be/wbpV59kutJM for tutorial flash and upgrade Lenovo S5 in YouTube
hello guys, i always get into download mode,after press reboot system (twrp), any solution for my problem ?
has anyone achieved unlocking bands in this phone?
Please port miui 11 9.10.30 mi-room pie 9.0 redmi note 4x SD625 to lenovo S5.
https://megaroms.net/miui-11-9-10-30-stable-port-for-redmi-note-4-4x/
https://sourceforge.net/projects/miui-ports.whats-new.p/files/mido/miroom/
After unlocking bootloader, is there anyway to remove the hideous "software can't check for corruption" warning? Thanks.
---------- Post added at 01:44 AM ---------- Previous post was at 01:39 AM ----------
Suryo75 said:
hello guys, i always get into download mode,after press reboot system (twrp), any solution for my problem ?
Click to expand...
Click to collapse
This means no rom is installed in your phone. Either you accidentally wipe system in twrp, or the rom is corrupted.
Download the deodexed stock rom below and flash with twrp. Should fix your problem.
https://drive.google.com/open?id=13tRqo5eSpRiVJwKiA-iSj2GyIF353ATQ
jychung93 said:
After unlocking bootloader, is there anyway to remove the hideous "software can't check for corruption" warning? Thanks.
---------- Post added at 01:44 AM ---------- Previous post was at 01:39 AM ----------
This means no rom is installed in your phone. Either you accidentally wipe system in twrp, or the rom is corrupted.
Download the deodexed stock rom below and flash with twrp. Should fix your problem.
https://drive.google.com/open?id=13tRqo5eSpRiVJwKiA-iSj2GyIF353ATQ
Click to expand...
Click to collapse
thank you i'll try
Could you plz make tutorial about getting back to stock unroot...thx
Twrp gone
Hello sir thank you for this wonderful tutorial,
But I have a problem , after booting to TWRP , then boot to system after that when I try to go back to recovery mode TWRP , twrp is gone , stock recovery back
EDIT:SOLVED -- READ BELOW:
I finally got it flashed by following a few guides here which I will link, and try to break it down easier for someone else to come across and follow. I thought I bricked my phone (flashed LineageOS then rebooted, phone did not show anything on screen, full black screen) but after following a few guides I got it solved.
If you get bricked, or just want to follow a clean perfect install, please start below (Skip to step 2 if you are starting fresh, if you have soft-bricked your device start from step 1)
1. Bricked it and had to execute QDLoader 9008 fix again.
Tutorial is easier than it looks, do not fear, if you have soft-bricked your device and see a black screen, go ahead and go through the qdloader brick solution.
2. From factory recovery updated to Version WW-16.1220.1909.193.
If you have started fresh, I would highly recommend updating to the more updated firmware first. For me this worked, and I suggest updating to get a more current kernel, which may play better with Lineage OS install. To install a newer stock firmware linked above, download the ~2GB Firmware above, and save it to your Minimal ADB / Fastboot folder. Power off your device, after it has been successfully restored (if you bricked it) or you want to start off fresh and get the install right the first time. With your device powered off, Hold Volume UP and then Hold Power Button until the Fastboot menu appears. Use your volume keys to select Recovery, then press Power button to enter the STOCK Recovery (we are still on stock firmware with stock recovery). When in stock recovery select install from ADB. We are going to push the install via ADB (I tried dragging the firmware to the internal and selecting install ZIP and that didnt work).
Go into your Minimal ADB / Fastboot folder on your computer and open command prompt by holding Shift+Control and Right clicking and then selecting open command prompt here.
Now, enter the following command in the command prompt and hit enter:
adb devices
This command will show if any fastboot device is connected. If it doesn’t show, then please check the drivers are installed properly and try again.
If your device is listed, then type the command given below and press enter:
adb sideload File_name.zip
^^This will be the ~2GB Firmware file downloaded above
Wait until the installation process completes.
Once the installation process is complete, restart your device.
Done. You have successfully upgraded the Asus ZenFone 6 to the newer firmware, please continue.
3. Downloaded OTA 16.1220.1909.193 to 16.1220.1909.194, renamed it to UL-ASUS_I01WD-ASUS-16.1220.1909.194-1.1.1-user.zip and placed into root of internal memory.
When I disconnected USB cable (or rebooted, not sure), I was prompted with update notification. I have updated it. Either way, reboot your device if you don't see the notification, and look in your notifications to see something saying: System Update Detected Proceed with Update - and select it and update.
4. Now that your phone is 100% Updated with the newest firmware, let's follow another guide I found here:
I assume you're on a fresh Android 9 stock ROM, or just finished restoring your phone with the Flashall_AFT.cmd from this tutorial.
You should at least boot once on the system, and disable any PIN or password to unlock your phone (hence putting a default password for the FBE).
Download the latest OFFICIAL TWRP.x.x.img (which we'll use to boot on it), and it's installer to install it later (TWRP.x.x.zip) if you want to use it.
LineageOS installation steps :
Reboot to bootloader (=fastboot mode), connect to your PC and boot on TWRP :
Command:
fastboot boot TWRP.x.x.img
Once on TWRP, you can see that we're on slot A (Menu > Reboot). Now go to wipe > factory reset and then wipe system (technically I suspect this only wipes slot A, but do it anyway, don't worry about the errors!)
Now go to Install > flash the newest official LOS_latest.zip. What happens here is that the LOS installer will flash LOS on the inactive slot (slot B in our case). And will also install the LOS recovery (on both slots it seems).
Reboot to recovery : your phone automatically switches slots and will boot the LineageOS recovery (Don't fear, we don't need TWRP right now, just go along with this step) on slot B.
On the LineageOS recovery, do factory reset (which seems to be a full /data format in fact, thus removing any previous encryption AND all your data on internal storage). If you want to use Magisk, go to the recovery's install menu and sideload it now
Use code:
adb sideload Magisk-v20.3.zip
Now reboot to system. It might take a while (one or 2 loops in my case), but your phone should boot, or in some cases will end up on LOS recovery asking for a 'factory data reset' (then do it and reboot again).
Once booted on your LOS rom, you can define a pin or password to lock your phone (that'll be the FBE decryption password).
Now if you want to use TWRP, reboot to bootloader and boot again on TWRP.img (step 1)
From TWRP > Install > flash TWRP.x.x.zip (that is, the TWRP installer). It installs on both slots by default. If you had installed Magisk, you have to flash it again (because anything modifying the boot.img - like the TWRP installer in our case - will erase it).
You can now reboot to system and enjoy LOS
Thanks for the nice documentation. I've recently also struggling with installing a custom ROM and this clears some things up.
Wanted to ask, if you also have the audio issue that 1) callers hear an echo of themselves, and 2) the bottom speaker is active when receiving a call?
Thanks.
abprie said:
Thanks for the nice documentation. I've recently also struggling with installing a custom ROM and this clears some things up.
Wanted to ask, if you also have the audio issue that 1) callers hear an echo of themselves, and 2) the bottom speaker is active when receiving a call?
Thanks.
Click to expand...
Click to collapse
Haven't actually put my sim in yet to make calls, will let you know later today, sorry about the delay!
I had previously attempted this a number of months ago, and managed to soft brick my Zenfone 6 several times, eventually kind of giving up and just using the stock firmware.
I tried again back on Memorial Day in the US. This time around, I bricked it hard. Could not get device to power on in any fashion. PC would not "see" USB connection at all.
I returned it to ASUS for service, and they've charged me a little over $200 to repair it. The only problem they noted was, "Device is rooted/unlock". So I have no way of knowing if their diagnosis is based on actual inspection of the device, or if they're just replacing the SOC on the basis that I used their official bootloader unlock tool, thus registering my phone's S/N.
Just a little caveat emptor for anyone attempting to use this guide. I was able to get TWRP to load, and succesfully updated the stock firmware, but any and all attempts to load the Lineage image failed.
Eventually one of them soft bricked my phone as before, and I think my mistake was interrupting the soft brick rewrite procedure by prematurely unplugging my phone from the PC.
I had a similar issue: Bricked and totally unresponsive phone (or so I thought until I realised the screen was flashing very faintly when I switched off the lights - I could only tell in the dark due to how dim the flashing on the display was) where de "Powered by Android" logo kept flashing for a millisecond and in a loop. None of the button combinations worked so I couldn't switch completely off, access recovery/fastboot, and my computer wouldn't recognise the phone when I connected it via USB. I ended up buying an EDL cable for deep flashing Qualcomm phones (€9) and within minutes I was back up and running. All solved.
~SilverLad~ said:
I had a similar issue: Bricked and totally unresponsive phone (or so I thought until I realized the screen was flashing very faintly when I switched off the lights - I could only tell in the dark due to how dim the flashing on the display was) where de "Powered by Android" logo kept flashing for a millisecond and in a loop. None of the button combinations worked so I could switch completely off, access recovery/fastboot, and my computer wouldn't recognize the phone when I connected it via USB. I ended up buying an EDL cable for deep flashing Qualcomm phones (€9) and within minutes I was back up and running. All solved.
Click to expand...
Click to collapse
Can you post a link to where you purchased the cable?
abprie said:
Can you post a link to where you purchased the cable?
Click to expand...
Click to collapse
I bought it from Amazon. The one I bought is out of stock now, but there are a lot of them available (from other brands/sellers). This one for example - is the one that most resembles the one I actually bought: https://www.amazon.es/ASHATA-tel%C3%A9fono-reparaci%C3%B3n-Adaptador-Engineering/dp/B086WZMFKW/ref=sr_1_18?__mk_es_ES=%C3%85M%C3%85%C5%BD%C3%95%C3%91&dchild=1&keywords=cable+edl&qid=1597417614&sr=8-18
Since the thread is already on topic, could I flash lineage os while being on a custom rom? I have Bliss ROM on partition A and stock on B. Is it possible to have both Bliss and Lineage in dual boot?
Also, maybe a little off topic, the partition A/B scheme was intended to be used as a dual OS boot like normal PCs? Because right now I can select A and boot Bliss, select B and boot stock, I don't get why the procedure for flashing Lineage OS is so convoluted(requires having stock both on B and A?!) since both partition seems to be standalone and separated from each other.
~SilverLad~ said:
I bought it from Amazon. The one I bought is out of stock now, but there are a lot of them available (from other brands/sellers). This one for example - is the one that most resembles the one I actually bought: https://www.amazon.es/ASHATA-tel%C3%A9fono-reparaci%C3%B3n-Adaptador-Engineering/dp/B086WZMFKW/ref=sr_1_18?__mk_es_ES=%C3%85M%C3%85%C5%BD%C3%95%C3%91&dchild=1&keywords=cable+edl&qid=1597417614&sr=8-18
Click to expand...
Click to collapse
Hey there, what's the process around using this cable?
vikashhero said:
Hey there, what's the process around using this cable?
Click to expand...
Click to collapse
The cable itself (on its own), doesn't seem to "do" anything, but is paramount in reaching the right area, in order to fix the problem by means of the appropriate instructions and files. I can't recall where I ended up getting the right instructions from - as I researched quite a bit, and did a lot of "trial an error" before getting it right - so I'm sorry but I can't refer you directly to them via link (so that whoever posted them originally gets the credit they deserve), but this is what I ended up doing (on a WINDOWS machine) based on said instructions:
DOWNLOADS:
- Qualcomm drivers: https://androidfilehost.com/?fid=11410963190603857508
- Firmware with scripts: https://androidfilehost.com/?fid=1395089523397969054
- Latest official ASUS firmware from the ASUS webpage (download and place it in a memory card)
- (If you don't already have it on your WINDOWS machine): download and install Microsoft Visual C++ 2010 Service Pack 1 Redistributable Package
PROCEDURE:
1- Install the Qualcomm drivers
2- Unpack the downloaded firmware containing the scripts
3- Place the memory card in the phone's slot (with the latest official ASUS firmware already in it)
4- Power off the phone by VolumeDown + Power buttons (keep them pressed for about <25 seconds)
5- Connect the phone to the computer via the EDL cable and press the button on the EDL cable (there was an extra bit on what to do with a archive from the drivers file if your computer doesn't recognise the port straight away, but it wasn't necessary in my case so I didn't keep that step/archive name in my notes... I'm afraid you will have to search for it like I did if you come across that issue).
6- Start update_image_EDL.bat script from the unpacked firmware
7- After the script in step 6 finishes, start script flashall_AFT.cmd
8- Start bootloader
9- Go to stock recovery mode and install the ASUS firmware from the memory card
X- (Instructions also suggested to repeat steps 8 & 9 again at this point - for a second time - but in my case it wasn't needed)
I hope this helps.
~SilverLad~ said:
The cable itself (on its own), doesn't seem to "do" anything, but is paramount in reaching the right area, in order to fix the problem by means of the appropriate instructions and files. I can't recall where I ended up getting the right instructions from - as I researched quite a bit, and did a lot of "trial an error" before getting it right - so I'm sorry but I can't refer you directly to them via link (so that whoever posted them originally gets the credit they deserve), but this is what I ended up doing (on a WINDOWS machine) based on said instructions:
DOWNLOADS:
- Qualcomm drivers: https://androidfilehost.com/?fid=11410963190603857508
- Firmware with scripts: https://androidfilehost.com/?fid=1395089523397969054
- Latest official ASUS firmware from the ASUS webpage (download and place it in a memory card)
- (If you don't already have it on your WINDOWS machine): download and install Microsoft Visual C++ 2010 Service Pack 1 Redistributable Package
PROCEDURE:
1- Install the Qualcomm drivers
2- Unpack the downloaded firmware containing the scripts
3- Place the memory card in the phone's slot (with the latest official ASUS firmware already in it)
4- Power off the phone by VolumeDown + Power buttons (keep them pressed for about <25 seconds)
5- Connect the phone to the computer via the EDL cable and press the button on the EDL cable (there was an extra bit on what to do with a archive from the drivers file if your computer doesn't recognise the port straight away, but it wasn't necessary in my case so I didn't keep that step/archive name in my notes... I'm afraid you will have to search for it like I did if you come across that issue).
6- Start update_image_EDL.bat script from the unpacked firmware
7- After the script in step 6 finishes, start script flashall_AFT.cmd
8- Start bootloader
9- Go to stock recovery mode and install the ASUS firmware from the memory card
X- (Instructions also suggested to repeat steps 8 & 9 again at this point - for a second time - but in my case it wasn't needed)
I hope this helps.
Click to expand...
Click to collapse
Hey buddy, I appreciate your reply. The cable is on its way but I got a bit fiesty and opened up the phone to short the two contacts. This did the trick for me, got me back into EDL mode, and I was able to flash the latest firmware. On that topic, I'm trying to find the most suitable firmware version to run LineageOS 17 on the phone. I grabbed Mauro's TWRP to temporarily boot into which allowed me to flash the latest Asus image from their site. I guell I'll just carry on from there.
vikashhero said:
Hey buddy, I appreciate your reply. The cable is on its way but I got a bit fiesty and opened up the phone to short the two contacts. This did the trick for me, got me back into EDL mode, and I was able to flash the latest firmware. On that topic, I'm trying to find the most suitable firmware version to run LineageOS 17 on the phone. I grabbed Mauro's TWRP to temporarily boot into which allowed me to flash the latest Asus image from their site. I guell I'll just carry on from there.
Click to expand...
Click to collapse
As far as I understand, that's pretty much what the cable does actually... I also came across that method along my research, but I didn't want to risk opening the phone up. Since you are in the "flashing state": be careful with some of the instructions out there - I flashed through TWRP as I have been doing all these years with other phones, following specific instructions for each ROM I've tried, and I had nothing but issues until I flashed through ADB. I still don't know why I was getting the "No OS" warning all the time despite flashing correctly from TWRP (contemplating the A/B partitions matter), but none worked...
~SilverLad~ said:
As far as I understand, that's pretty much what the cable does actually... I also came across that method along my research, but I didn't want to risk opening the phone up. Since you are in the "flashing state": be careful with some of the instructions out there - I flashed through TWRP as I have been doing all these years with other phones, following specific instructions for each ROM I've tried, and I had nothing but issues until I flashed through ADB. I still don't know why I was getting the "No OS" warning all the time despite flashing correctly from TWRP (contemplating the A/B partitions matter), but none worked...
Click to expand...
Click to collapse
Appreciated but I'm all sorted. I believe my pitfall was not using the copy-partitions .zip file detailed in the instructions. I had no idea that was a thing. Was extra careful this time and now I'm on the ROM I need.
I ****ing hate A/B partitioned phones, makes custom ROMs such a chore. Sort of getting fed up with phones in general but at least this is working well for now.
vikashhero said:
Appreciated but I'm all sorted. I believe my pitfall was not using the copy-partitions .zip file detailed in the instructions. I had no idea that was a thing. Was extra careful this time and now I'm on the ROM I need.
Click to expand...
Click to collapse
Happy to hear that Indeed be careful - this is a tricky phone...
vikashhero said:
I ****ing hate A/B partitioned phones, makes custom ROMs such a chore. Sort of getting fed up with phones in general but at least this is working well for now.
Click to expand...
Click to collapse
Same here. It was so easy to do the Samsungs "back in the day", and you always had ODIN as a fallback if things went south. But this "A/B" partition nonsense (as well as other useless changes they introduce every time they "upgrade" Android, or certain structure modifications every so often when a new phone comes out) are a pain in the butt! Changes clearly aimed at making things more annoying/difficult for us people who don't want standard/corporate/unnecessarily bloated phones... Actually (as a former Blackberry user) I was tempted to get one of these Android based Blackberrys (the KEY2), but I didn't in the end precisely due to the fact that the bootloader can't be touched, and it can be rooted...
vikashhero said:
Appreciated but I'm all sorted. I believe my pitfall was not using the copy-partitions .zip file detailed in the instructions. I had no idea that was a thing. Was extra careful this time and now I'm on the ROM I need.
I ****ing hate A/B partitioned phones, makes custom ROMs such a chore. Sort of getting fed up with phones in general but at least this is working well for now.
Click to expand...
Click to collapse
I want to switch to because the latest security update (August 2020) by Asus is soft bricking the phone for many users,
but I am seeing a few reports about some bugs (like the phone is stuck in the lineage boot symbol and cellular errors) in lineage os and also seeing few post with a lot of installation errors (like soft and total bricking) etc. and for me in developers options I'm not seeing the OEM and advanced boot options.(in my asus stock os) I just found out that I have to download the Unlock Boot loader apk separately from asus and install it using command prompt so I don't know how to proceed.
Can you please elaborate on how you actually did it with your Asus Zenfone 6(2019), I am a total noob in this and I also couldn't understand the partition a and b parts too.