hello everyone
Any one know how to completely turn of the AVN système on kia niro? my unite is stuck in FW update screen and i can’t turn it off even reset with the small pinhole reset button.
Thank you for your help
Related
Hi everyone, i've got problem with this device.
Device is running normaly, but the display remains off(black), if you turn on the BA, there are stripes for a second, but then they dissapear.
MDA is making noise(clicks, warnings etc), you can use touchscreen but the screen is still black.
It has been in this state from yesterday, I was listening to the music via TCPMP, once I turned off the screen but later It couldn't become on...
I've formated it already....It didn't have effect
Thanks for help
ps I cant do the hard reset because I dont know what I have to push to do it (foto, record ??!)
try pressing the power button for a long time.
regarding the hard reset. IT's in the WIKI.
or use the search function for "hard reset".
Hi all! I am a owner of not well known MTCB-MD and have a few issues with it. Unit was updated to Malaysk rom for RK3066 android 4.4.4 and mcu is updated from MTCB-MD-1.83V to MTCB-MD-2.67V.
First problem is that power buton is not working. Cannot turn it off (it turns on and off via car key), and can´t make selection in recovery (reboot, restore, update, factory reset...). When MTC is on and I push power button it acts like HOME button (and I tried with all launchers).
Second thing is that 3 keys on the right are not working at all, and buttons on the left are remaped without any sense, luckly disc eject is displayed on screen, it is only way to eject CD/DVD.
Third thing is about Wi-Fi. Sometimes it turns on and immediately connects to network, sometimes it is stucked on Turning on Wi-Fi, sometimes it drops connection with phone which is 20cm away from unit.
Any idea how to roll back to original android version and where to find mcu version 1.83? And how to even upgrade/downgrade it when i can´t select any option in Recovery mod???
THANKS IN ADVANCE FOR YOUR RESPONSE!
blackwood91 said:
Hi all! I am a owner of not well known MTCB-MD and have a few issues with it. Unit was updated to Malaysk rom for RK3066 android 4.4.4 and mcu is updated from MTCB-MD-1.83V to MTCB-MD-2.67V.
First problem is that power buton is not working. Cannot turn it off (it turns on and off via car key), and can´t make selection in recovery (reboot, restore, update, factory reset...). When MTC is on and I push power button it acts like HOME button (and I tried with all launchers).
Second thing is that 3 keys on the right are not working at all, and buttons on the left are remaped without any sense, luckly disc eject is displayed on screen, it is only way to eject CD/DVD.
Third thing is about Wi-Fi. Sometimes it turns on and immediately connects to network, sometimes it is stucked on Turning on Wi-Fi, sometimes it drops connection with phone which is 20cm away from unit.
Any idea how to roll back to original android version and where to find mcu version 1.83? And how to even upgrade/downgrade it when i can´t select any option in Recovery mod???
THANKS IN ADVANCE FOR YOUR RESPONSE!
Click to expand...
Click to collapse
In the settings/factory settings/ there is an option for button layout. Change it to what works with your setup.
Contact your seller or manufacturer for files.
I have already tried all button layout options but nothing changes.
UPDATE: This morning new problem came out. MCU starts when I start engine, display logo, boot to homescreen, and after few seconds starts again displaying VW logo and it´s stuck on it...
Would it help to connect it to laptop via USB-A/USB-A cable and reinstall software/firmware with RK software?
Hey all,
I hope someone can assist me here. I've got Philips 48PFS8109/12, last year or so I upgraded the firmware on the TV. Since then the TV won't turn on.
I've tried using the joystick at the back and it's not turning on the TV, the remote control is not working either.
The light at the front where it says Philips light's up when plugged in to power supply and Optical light at the back of TV is on as well but no other lights are visible, so I'm sure the power supply is all good.
Is there anyway to downgrade the firmware on TV without actually turning on the TV? The screen stays black the whole time and doesn't even show the philips logo.
I hope someone can assist me further here. Thanks a lot for any responses and suggestions
Anyone any suggestions? thank you
just go to philips homepage and download the firmware for your device...and follow the instructions xD
Hi friends. My p615 remote sometimes doesn't respond. Sometimes When I press a single button, it feels like I pressed it 4-5 times. What is the solution?
(tv is new, change battery, factory reset not solution) firmware v650
i have the same problems. No solution, yet
Look like it has moisture on remote pcb ,you need to disassembly remote and clean it with sonax.
Hi
I have a problem with my tcl 43P610, my son did something in service menu and my screen is black now. Tv is only responding on power button or secret codes. So I have found that a combination of codes 062598 + menu + XXX can change selection of projectID or something like that,right?
Does anyone know what is the projectid for this model?
Or how can i fix this?
I've tried hard reset, it did not work.
Thanks