Hi there
I'm pretty happy with my XDA exec installed in "corporate mode" (far more reliable/stable than the standard mode i received it in from O2) however i have a very annoying problem:
After its been switched on and in use for a few hours the "phone" feature stops giving you access to the on-screen number keypad. When you select the "phone" app from the start menu shortlist it takes you to a page with only the following 6 keys: "call History" "mute" "video" "note"
"contacts" "hold" and "end".
In order to get the number pad back (so you can call people other than those in your contacts) it offers you a "keypad" option. However when you click it this does nothing.
This is quite frustrating as it means if you wish to make a call in PDA mode (where the qwerty keyboard is hidden behind the screen) you have no number keypad with which to dial a new number.
Is there a fix for this? Perhaps there's a home screen i can set it to which always has the phone number keypad displayed.
Many thanks
Charlie
When I click "Phone" it shows the Notification bar on the top, then my service provider (3G T-Mobile NL) along with an arrow pointing left, 3 of my last calls, 1/4 of my first speed dial number and finally the number pad - numbers 7, 8 and 9 are cut off level with the letters by a block of the wall paper background and the TF3D bar on the bottom.
If I minimize the dial pad, I see the last 3 out going calls and first 3 numbers of my speed dial.
When I am in a call, the bottom half of the TF3D screen cuts off everything else - end call, speaker on / off, etc.
How can I fix this?
dialing number problems when i wanna dial a phone number on my tilt 2 the wont work properly instead it reads the number as being across the top of my keyboard which is not bcuz on the tilt keypad there in the middle is there any way i can fix this thank you
Hi!
I just noticed that when I try to enter a phone number on landscape mode on my ATT Tilt 2 my current top row of characters are actually printing numbers but the numbers on the right side of the panel are not working correctly.
For example 8 and 0 work fine but 3 also does 8 which means somehow my top row is now all numbers which is not right for this version of the phone...
any ideas?
THIS HAS BEEN RESOLVED.
Stumbled across this and thought I'd share..
Go into the Dialer and enter *#83786633 then press the Home key Go back into the phone dialer and enter *#22745927 Now a box will come up asking for the SPC code. Enter 000000 Press the Hiddenmenu Enable radio button.
Now you can use these codes.
Shutdown
*#7594# This enables you to shut your phone off by long-pressing the power/lock key. No more pop-up confirmation. I have tested this and it works successfully. I've also discovered by doing this, it will disable the puzzle/glass unlock screen. Personally, having to push a button and slide the screen is redundant.
Enjoy
Here are a bunch of others "secret menu" items, for those who care.
Go into the Dialer and enter *#83786633 then press the Home key
Go back into the phone dialer and enter *#22745927
Now a box will come up asking for the SPC code. Enter 000000
Press the Hidden menu Enable radio button.
Now you can use these codes.
The dialing code string you have to use is *##
Here are some things you can gain access to
Audio Tuning
*#28346#
Several audio tuning menus.
I've only tested the two items below:
To silence boot and shutdown audio go to Situation/BOOTSOUND and turn the values to 0. I've tested and confirmed this works.
To silence the volume key audio when turning the volume up/down go to Situation/VOLUMEKEY and turn the values to 0. I've tested and confirmed this works.
Full Bat Popup
*#3844228#
This allows you to disable the full battery pop-up.
I have tested this and it works successfully.
HwCodec
*#0002*28346#
Audio path volume controls. Most importantly, it looks like there's a sidetone adjustment.
I have not tested any of these items yet.
Shutdown
*#7594#
This enables you to shut your phone off by long-pressing the power/lock key.
No more pop-up confirmation.
I have tested this and it works successfully.
I also need to point out that this disables your slide lock screen.
Diag/Testing Mode
*#4636*1111#
GPSSetup menu
*#1472365#
The settings are set to the "fixed" values by default.
You can go into Command and then start GPS and force a satellite lock.
There's other cool info there too.
*#7594#
If your enable this, it appears to not only shutdown your phone with a long press of the power key, but it also disables your lock screen (puzzle/glass screen).
*#1472365# - GpsSetup
Very useful tests for the GPS!!!
Setup/Position Mode/ Operation Mode: (Standalone/MSAssisted/MSBased) Starting Mode: (Cold Start/Warm Start/Hot Start) Session Type: (Single Fix/Navigation) Setup/Command allows you to test the GPS and look at the results
*#INFO*1111# - Testing
Phone information/Battery information/Battery history/Usage statistics
Very useful diagnostics
*#0*# - LCD TEST
red/green/blue/melody/vibration/dimming/megacam/Sensor/touch/sleepmode/LED/RECEIVER
Very useful tests for the LCD
##RTN# - Real-Time Network (RTN)
Lots of useful information, like the Life timer / calls and Life Byte usage stats
*#DATA*727336*# - DataCreate
Call log/System Space/User Space/Phone Book/Schedule/Message/Ring tone/Screen/IMEI/ESN/Error log
Very useful information!!!
*#0228# - BatteryStatus
Very useful real-time battery statistics!
##UPST# - PhoneUtil - UART/USB
Universal Asychronous Receiver/Transmitter / Universal Serial Bus
Most likely controls how you connect technician testing equipment to test out the UART/USB subsystems
##DATA# - Data Programming - (Verizon customers: whenever prompted for SPC enter 000000)
User Name/Advanced/Restore/Enable HFA/DSA Server/MMSC/URL/Multimedia/WorkMode/WiMAX
##DEBUG# - Debug Menu - (Verizon customers: whenever prompted for SPC enter 000000)
Debug Screen/Test Calls/RC Data/HDR/1X Selection/Voice Privacy/DTMF Set/Korea Mode Set
##AKEY# - Data A key menu - (Verizon customers: whenever prompted for SPC enter 000000)
##<MSL># - (Verizon customers: whenever prompted for SPC enter 000000)
Program your Mobile Device Number(MDN) and Mobile Station ID(MSID)
##GPSCLRX# - Reset the GPS - (Verizon customers: whenever prompted for SPC enter 000000)
##SCRTN# - Changes DSA back to Factory - (Verizon customers: whenever prompted for SPC enter 000000)
##TTY# - TTY TestMode
*#0842# - Device Test - Vibration Test
*#0673# - MelodyTest
*#7780# - Factory data reset
*#232331# - BluetoothTest
*#2664# - Touchscreen Accuracy Test
Nice if you want to see how accurate your touchscreen is
*#0283# - ServiceMode - PACKET LOOPBACK
Need to hit home to get out - I couldn't get this to do anything but it could be the data packet that you sent coming back to you on the loopback device
*#767*3855# - Factory Format - WARNING!!!
Will go to Hands Free Activation
Nice if you'd like to reactivate your phone, it will do so automatically
*#197328640# - ServiceMode - Menu key to bring up menu - WARNING!!!
Will turn off your radio - Not sure what this does
*#0011# - ServiceMode - Force Closes - Menu key to bring up menu
Will turn on your radio, and then reboot
*#32489# - ServiceMode - Force Closes - Menu key to bring up menu
Doesn't seem to affect the radio
*#2580# - ServiceMode - Not sure what this does
*#0782# - RTCTimeRead - Displays Date and Time
*#745# - Sec_RIL_Dump - Has the LogFileList
Copy to phone memory/Copy to SD card(grayed out)/View Ril Log(grayed out)/Clear Ril Log/Exit
Probably dumps the logs for the Radio Interface Layer (RIL) between the Operating System and the phone's radio and modem
I haven't tested a dump yet
*#9900# - SysDump
copy logcat/dumpstate/dumpsys/enable debug log/copy/watchdogdumpstatelog
Probably dumps the logs for the Operating System kernel
I haven't tested a dump yet
Whoah! I didnt know about all those other ones.. Nice job
Thanks to both of you, good to know, possibly may come in handy at one point or another.