VoLTE option is missing intermittently, sometimes its working but sometimes VoLTE option is not there. Every time i have to restart device to correct the issue, can someone please suggest any solution?
I tried enabling/Disabling VoLTE option from settings etc..
Which network and device u r using?
I think VOLTE network strength weak in ur area..
Try these steps
Open phone dialer nd type this code
*#*#4636#*#*(copy paste not work)
It'll show sim1,sim2 info nd wifi info
Select sim in which u r facing volte issue
Now scroll nd click set preferred network type
Thr scroll nd choose LTE only
Thts it.. done
NOTE-IF U RESTART OR ON AIRPLANE MODE, SETTINGS WILL RESET U HV TO DO WHOLE PROCESS AGAIN
Related
Hey, I've got CM10 on my GS3. When I go under Settings, the Wifi toggle is set to Off and grayed out so I can't toggle it. When I go to Wifi, it just says "Turning on Wifi" indefinitely. I also have issues with wifi tethering sometimes.
Any solutions to this? I haven't been able to find any posts on it. I'd prefer not to reset to another ROM, but if there's no other ways to fix this, oh well.
Thanks!
Flash to a TW rom and see if it works.
If it doesnt work, try the following:
Diablo67 said:
So as to fix this problem,some people suggest to do a Factory reset.But, it is completely unnecessary.Instead you can try the following methods, which where tested by me successfully.
1. Dial *#*#526#*#* to reload the wifi driver.If it doesn’t work, restart your phone and dial it once gain.It will work for sure.
2.There is an app “Wifi-Fixer” from android market,which claims to be fix this problem.But seriously,it hadn’t worked for my mobile phone(Samsung Galaxy Ace).But,
if you are interested, can download and try it here.
For HTC users, I have a pretty good trick which works very well.
When you have obtaining IP address problem,
1.Turn off wifi.
2.Open “Allshare”, then you will be asked to connect to a wifi network.
3.Then select the wifi network that you need to connect from the list opened.
Magically, you will be connected without any extra effort.This works 100% sure without fail.
If that doesnt work try this:
1.Dial *#*#526#*#*.Then a message will be shown “Driver loading Successful”.
2.Now Start the WiFi, it should work.
If the message “Driver Loading Unsuccessful” is shown, follow these steps:
1. Dial *#*#526#*#* again and click options button on your phone.
2. Select Rx test.
3. Select Channel >9 .
4. Click Start and exit.
5 . After some time, turn on the wifi.It should work.
Click to expand...
Click to collapse
Sent from my PG06100
My phone won't even let me dial that, the code disappears the second I hit star the last time, not sure if it's supposed to do that. I'm gonna just try updating CM and see if that fixes it.
hello guys, my device is galaxy note 2, i updated my phone to android 4.3 manually, the update is successful, i got all the features of the new firmware, but i have a problem: the network connection signal is appearing normally but i can't do any call or send/receive a massage it says (not registered on network), no problems with the device's IMEI, is it because the room is not for my region?? or modem file problem? an help please
bilalmaskaleh said:
hello guys, my device is galaxy note 2, i updated my phone to android 4.3 manually, the update is successful, i got all the features of the new firmware, but i have a problem: the network connection signal is appearing normally but i can't do any call or send/receive a massage it says (not registered on network), no problems with the device's IMEI, is it because the room is not for my region?? or modem file problem? an help please
Click to expand...
Click to collapse
BTW you should post in Galaxy Note 2 Q&A forum ( use xda device search engine to locate it)
A modem change might give you results only after you have checked your APN ,
Quick Guide
First Check your settings > about phone > status > your phone number ( IF UNKNOWN )
You won't be able to send SMS by any third party sms apps or Have a Network connection
Solution :-
You need to edit that "unknown" number to your phone number, by putting your SIM card on any old phone that has a "my number/owner number" option, (most old phones do). Edit and save it to the proper phone format as your Sim Card number (Example: +63913XXXXXXX). Now put the SIM back to M110S, to solve this problem.
Than check your system settings, in Settings > Wireless & Networks > Mobile Networks > Access Point Names.(APN) as provided by your Network provider . If your Apn is not set, you wont be able to have data connection, so set it first
If still no data connection, Common Trick is to toggle WIFI and Airplane mode or
1. Turn ON WIFI
2. Set the phone to Flight Mode
3. Power down the phone for a few Minutes
4. Power it back up
5. Turn OFF flight mode
6. Turn OFF WIFI
Should get Data back
also read this
Check this out! Links to useful Guides and " Banned " Documentaries
I did a clean install of cosmic v4.6
Installed Gapps.
APN is not saved by default.
I have to change preferred network to GSM/WDCMA Auto.
I get an error that Unfortunately, the process com.android.phone has stopped.
But the APN now gets installed of both the sims.
In dual sim settings the 2nd sim is activated by default for calls, data & messaging.
Now when I restart my phone due to any reason I have to go through the entire process stated above to get APN.
Also when I get a 2nd call in call waiting the 1st call goes to HOLD automatically.
Kindly HELP
antiquitygold said:
I did a clean install of cosmic v4.6
Installed Gapps.
APN is not saved by default.
I have to change preferred network to GSM/WDCMA Auto.
I get an error that Unfortunately, the process com.android.phone has stopped.
But the APN now gets installed of both the sims.
In dual sim settings the 2nd sim is activated by default for calls, data & messaging.
Now when I restart my phone due to any reason I have to go through the entire process stated above to get APN.
Also when I get a 2nd call in call waiting the 1st call goes to HOLD automatically.
Kindly HELP
Click to expand...
Click to collapse
a simple fix fr this prob is ...use single sim
open terminal
type su and grant root access
then type setprop persist.radio.multisim.config none
then reboot .. u can use mobile data now ...... k2wl is working towards fixing this issue
I entered *#*#4636#*#* and select phone info but warning "not available" so I cant change modem settings or lte.What is the problem ? I am sorry bad english.Ls990 fulmics 5.3
It is disabled for fulmics. But if you want to change your network settings then it is still in
Settings>mobile data>mobile network>network mode
All settings like as lte and others are given there.
I hope this may help. If not then you can still ask
hey guyz I am also facing the same problem, whenever I open 4636 menu and select phone info i get the error "this application does not work on this device".
I want to activate volte provisional flag but due to this I am not able to do.
Please help and thanks in advance
In secret menu > Rat selection , network mode , evey choice says FAIL . I have no reception signal . Can anyone help?
Hidden menu
I'm having the same problem. It had worked when I originally unlocked my phone and put a simple mobile card in it. I tried to switch to my metro pcs card and now I'm not getting anything.
Help please.