hello guys, my device is galaxy note 2, i updated my phone to android 4.3 manually, the update is successful, i got all the features of the new firmware, but i have a problem: the network connection signal is appearing normally but i can't do any call or send/receive a massage it says (not registered on network), no problems with the device's IMEI, is it because the room is not for my region?? or modem file problem? an help please
bilalmaskaleh said:
hello guys, my device is galaxy note 2, i updated my phone to android 4.3 manually, the update is successful, i got all the features of the new firmware, but i have a problem: the network connection signal is appearing normally but i can't do any call or send/receive a massage it says (not registered on network), no problems with the device's IMEI, is it because the room is not for my region?? or modem file problem? an help please
Click to expand...
Click to collapse
BTW you should post in Galaxy Note 2 Q&A forum ( use xda device search engine to locate it)
A modem change might give you results only after you have checked your APN ,
Quick Guide
First Check your settings > about phone > status > your phone number ( IF UNKNOWN )
You won't be able to send SMS by any third party sms apps or Have a Network connection
Solution :-
You need to edit that "unknown" number to your phone number, by putting your SIM card on any old phone that has a "my number/owner number" option, (most old phones do). Edit and save it to the proper phone format as your Sim Card number (Example: +63913XXXXXXX). Now put the SIM back to M110S, to solve this problem.
Than check your system settings, in Settings > Wireless & Networks > Mobile Networks > Access Point Names.(APN) as provided by your Network provider . If your Apn is not set, you wont be able to have data connection, so set it first
If still no data connection, Common Trick is to toggle WIFI and Airplane mode or
1. Turn ON WIFI
2. Set the phone to Flight Mode
3. Power down the phone for a few Minutes
4. Power it back up
5. Turn OFF flight mode
6. Turn OFF WIFI
Should get Data back
also read this
Check this out! Links to useful Guides and " Banned " Documentaries
I've been testing this phone for a while and it seems like a lot of the menus have been disabled. I'm creating a list of what works and what doesn't in these next few posts.
Note: I do not provide any support with the use of these codes. The thread is for documentation purposes.
What works:
5689#*993# (HiddenMenu) - Device Testing Menu
##27263# (##BRAND#) - Removes any carrier branding and redetects the carrier based on (NV registry/RUIM/SIM?).
Note: Useful if flashing to Boost Mobile or similar carrier.
##72786# (##?????#) - Resets provisioning and makes phone reactivate.
Useful if you are having network issues. Sprint recommends this if you ever change your services or phone number.
##72786# (##UPDATE#) - Updates cellular data profile and configures service. Also causes a firmware update check.
##786# (##RTN#) - Factory reset. Erases everything!!! RTN is short for return?
##3424# (##DIAG#) - Pulls up DIAG menu with option to enable or disable.
Selecting "Enable" allows Qualcomm Mode when the phone is set to "Charging mode" while ADB debugging is disabled.
##3282# (##DATA#) - Pulls up cellular data settings menu. You can view settings by choosing options and this also lets you adjust PRL settings with your MSL code.
##33284# (##DEBUG#) - Pulls up reception statistics, connectivity, and misc device information.
##564# (##LOG#) - System Error Log. Have options to clear or copy to storage. Viewing it will show Last kmsg, crash log, or ANR log.
Dial Codes That Don't Work
These are the dial codes that are not working on our model.
##PST#
Reserved
I've reserved this post for any comments I may have about the posts above.
Here is an updated list of what works.
What works:
##27263# Removes any branding (sprint) and resets phone to update branding. (useful if flashing to boost or other carrier) (##BRAND#) Reboots phone.
##72786# Resets provisioning and makes phone reactivate. Useful if you are having network issues. Sprint recommends this if you ever change your services or phone number. Reboots phone.
##873283# Updates data profile and configures service - Causes a firmware update check (##UPDATE#) Reboots phone.
##786# Factory reset. Erases everything!!! (##RTN#) Reboots phone.
##3424# Allows Qualcomm Mode while in Charging mode when ADB is disabled. (##DIAG#)
##3282# Data menu allows you to view and edit your provisioning setting if you have your MSL code (##DATA#)
##33284# Network debugging menu. Gives information about network status. ##DEBUG#
l33tlinuxh4x0r said:
Here is an updated list of what works.
Click to expand...
Click to collapse
Thanks, I'll update the op.
thals1992 said:
Thanks, I'll update the op.
Click to expand...
Click to collapse
There is a typo in the op. ##27269# (##BRAND#) should be ##27263# (##BRAND#)
---------- Post added at 09:14 AM ---------- Previous post was at 08:59 AM ----------
Just found another code. ##33284# ##DEBUG#
I'm finding that codes from the G2 that I have work.
https://forum.xda-developers.com/showthread.php?t=2523252
So I have been fooling around with the dialer codes and I still can't figure out how to change the apn settings.... Phone is UICC unlocked and I have my MSL.
Anything Suggestions?
##786# I did this and now my cellphone dont recogbize my sim card. What I need to do? please help
thals1992 said:
I've been testing this phone for a while and it seems like a lot of the menus have been disabled. I'm creating a list of what works and what doesn't in these next few posts.
What works:
##27263# (##BRAND#) - Removes any carrier branding and redetects the carrier based on (NV registry/RUIM/SIM?).
Note: Useful if flashing to Boost Mobile or similar carrier.
##72786# (##?????#) - Resets provisioning and makes phone reactivate.
Useful if you are having network issues. Sprint recommends this if you ever change your services or phone number.
##72786# (##UPDATE#) - Updates cellular data profile and configures service. Also causes a firmware update check.
##786# (##RTN#) - Factory reset. Erases everything!!! RTN is short for return?
##3424# (##DIAG#) - Pulls up DIAG menu with option to enable or disable.
Selecting "Enable" allows Qualcomm Mode when the phone is set to "Charging mode" while ADB debugging is disabled.
##3282# (##DATA#) - Pulls up cellular data settings menu. You can view settings by choosing options and this also lets you adjust PRL settings with your MSL code.
##33284# (##DEBUG#) - Pulls up reception statistics, connectivity, and misc device information.
##564# (##LOG#) - System Error Log. Have options to clear or copy to storage. Viewing it will show Last kmsg, crash log, or ANR log.
Click to expand...
Click to collapse
##72786# stands for ##SCRTN# which my best guess is sprint carrier return. or in other words carrier settings reset.
Now i got a sim crad invalid, cofiguration cellphone stuck (I can avoid pressa all buttons) and a message "power off device and inster the sim card that came with you phone, then restart"... and that is a problem, I'm not in USA ._.
MrManty said:
Now i got a sim crad invalid, cofiguration cellphone stuck (I can avoid pressa all buttons) and a message "power off device and inster the sim card that came with you phone, then restart"... and that is a problem, I'm not in USA ._.
Click to expand...
Click to collapse
Try taking out the sim card and booting up. Then reinsert the sim card and reboot.
5689#*993# - works for hidden menu
from this post: https://forum.xda-developers.com/showthread.php?t=2523252
does not work either... same issue sim cannot be detected. using volume up+volume down+power got passed configuring phone state.. now stuck with invalid sim even though phone is unlocked..
veshwar said:
does not work either... same issue sim cannot be detected. using volume up+volume down+power got passed configuring phone state.. now stuck with invalid sim even though phone is unlocked..
Click to expand...
Click to collapse
Did you solved it? same problem here!
If you have invalid sim on another carrier, try inserting the sprint sim and going to system update menu, then hit unlock uicc and it will reboot, then again go to system update and hit update profile then update prl. Then power off and insert the other sim and it should recognize it. Tell me if it works.
Sent from my LG-LS993 using XDA-Developers Legacy app
Dr-akbar said:
If you have invalid sim on another carrier, try inserting the sprint sim and going to system update menu, then hit unlock uicc and it will reboot, then again go to system update and hit update profile then update prl. Then power off and insert the other sim and it should recognize it. Tell me if it works.
Click to expand...
Click to collapse
Hey Guys..
My LG G6 of sprint is unlocked.. tested with att... call and text works fine.. but data does not.
I cannot edit or add APN as its grayed out in settings..
I tried ##DATA# and there it does not give me any option to edit delete or add ... just gives reset to default for APN Settings and nothing happens....
Please help
desmataks said:
Hey Guys..
My LG G6 of sprint is unlocked.. tested with att... call and text works fine.. but data does not.
I cannot edit or add APN as its grayed out in settings..
I tried ##DATA# and there it does not give me any option to edit delete or add ... just gives reset to default for APN Settings and nothing happens....
Please help
Click to expand...
Click to collapse
You have to get the UICC Profile Update from Sprint.... Call the International Team or chat with them online and ask to be UICC unlock, if asked why, you're about to travel abroad... This UICC Update might affect the Domestic Unlock. At one point my device was domestically unlock, but now it isn't. (Maybe because I did a hard reset.) **Never Reset After Unlock, I learned the hard way lol
Shortcut master lite works i had the same problem
---------- Post added at 12:58 AM ---------- Previous post was at 12:58 AM ----------
Find global settings and it will turn on data
Dr-akbar said:
If you have invalid sim on another carrier, try inserting the sprint sim and going to system update menu, then hit unlock uicc and it will reboot, then again go to system update and hit update profile then update prl. Then power off and insert the other sim and it should recognize it. Tell me if it works.
Sent from my LG-LS993 using XDA-Developers Legacy app
Click to expand...
Click to collapse
wtharden said:
You have to get the UICC Profile Update from Sprint.... Call the International Team or chat with them online and ask to be UICC unlock, if asked why, you're about to travel abroad... This UICC Update might affect the Domestic Unlock. At one point my device was domestically unlock, but now it isn't. (Maybe because I did a hard reset.) **Never Reset After Unlock, I learned the hard way lol
Click to expand...
Click to collapse
Thanks I got it unlocked finally again from sprint...
Other sims are working fine..
When I insert ATT sim card then if network mode is automatic then it shows 3G always and speed is too low tested with speedtest. If I change network mode to LTE-CDMA option then speed test is 4-5mbps but then calling does not work.. When i dial any no with LTE-CDMA mode then it says sim is not valid or there is no sim.
Will ATT not work fully with LTE on automatic mode on sprint LG G6?
Please help.
Thanks in advance.
In secret menu > Rat selection , network mode , evey choice says FAIL . I have no reception signal . Can anyone help?
Hidden menu
I'm having the same problem. It had worked when I originally unlocked my phone and put a simple mobile card in it. I tried to switch to my metro pcs card and now I'm not getting anything.
Help please.
VoLTE option is missing intermittently, sometimes its working but sometimes VoLTE option is not there. Every time i have to restart device to correct the issue, can someone please suggest any solution?
I tried enabling/Disabling VoLTE option from settings etc..
Which network and device u r using?
I think VOLTE network strength weak in ur area..
Try these steps
Open phone dialer nd type this code
*#*#4636#*#*(copy paste not work)
It'll show sim1,sim2 info nd wifi info
Select sim in which u r facing volte issue
Now scroll nd click set preferred network type
Thr scroll nd choose LTE only
Thts it.. done
NOTE-IF U RESTART OR ON AIRPLANE MODE, SETTINGS WILL RESET U HV TO DO WHOLE PROCESS AGAIN
After I've rooted my phone, I've disabled Show Caller ID(so that others can't see my phone number), and now I cannot enable it; It shows an error "Unexpected response from network" I tap Ok and another error pops out "Network or SIM card error".
I've tried to reset the dialer app and it changed nothing(about the error).
But one thing that I wasn't able to do is to locate directly where this setting is stored(in the directory), and it has something to do with my phone number, since whenever I use a different SIM it enables Caller ID; While still being unable to access the setting itself -- uses default.
Or are there other ways to fix this?
Thanks in advance!
You'll need to talk to your cellular service provider to reset this if you see that error.