Related
Hey guys,
I need help.
First of all I just got an sms and tried to reply but my wave got frozen then I removed batterry and I got blue screen with this error:
"Platform 'SO' checking is failed...
Patform 'SO' modification is detected!"
And I cannot do anything except i can enter download mode, but KIES wont connect or see my device.
I guess there is method for full flash without Kies and i think this may be just software issue. I tried reinstaling Kies, updateing USB drivers..
Help me, i will do anything!
Try Full Flashing With Multiloader
OK, but how to do it? Is there any tutorial? ty.
LiFe_sTyLe said:
OK, but how to do it? Is there any tutorial? ty.
Click to expand...
Click to collapse
Search In Youtube
OK, i found tutorials but i am unable to find full firmware. i just downloaded two different firmwares from samfirmware but no luck.. FS file is missing ?
Hi friend,
few days back i rooted my galaxy note 2 (GT-N7100) with the steps given below.
1.Root with Stock Recovery - CF auto Root from Chainfire - can keep counter '0'
Big Big Thanks to Chainfire for giving this, Here is source thread
Download this CF Auto Root package
and extract it to .tar
Procedure :
Make sure you have installed Kies OR Samsung USB driver
1.Open Odin and select PDA tab
2.Point to extracted file CF-Auto-Root-SGN2.tar (see image below)
3.Now switch off device and reboot in download mode
press Vol down + Home +Power, And then, press Volume UP button in Warning Page to enter the Download Mode
4.Connect device to PC and wait till device successfully added to com port (it will turn light blue) (see image below)
5.Hit ‘Start’ to flash
6.Once it flashed successfully, you can see 'PASS' in table above the ID :COM, you can disconnect device from PC
7.Reboot device and you will have superSU in application drawer.
after rooting my mobile everything worked fine for untill i reseted my mobile. The problem is i couldnt able to connect wifi, It is showing access point name but its not getting connected. Its keep showing the msg called obtaining ip address. And i am getting an error called (Network disabled. poor connection)
so i tried to unroot it by selecting the full unroot from SuperSU icon. After clicking the option full unroot uption it say uninstalling pls wait but nothing is happening i still have that supersu and my mobile is still rooted.
so i went to samsung showroom today, they said its showing that is modified so you cant claim warranty.
please find the screenshots and help me on this i still have 10 months warranty left.
Thanks in advance.
prashanth667 said:
Hi friend,
few days back i rooted my galaxy note 2 (GT-N7100) with the steps given below.
1.Root with Stock Recovery - CF auto Root from Chainfire - can keep counter '0'
Big Big Thanks to Chainfire for giving this, Here is source thread
Download this CF Auto Root package
and extract it to .tar
Procedure :
Make sure you have installed Kies OR Samsung USB driver
1.Open Odin and select PDA tab
2.Point to extracted file CF-Auto-Root-SGN2.tar (see image below)
3.Now switch off device and reboot in download mode
press Vol down + Home +Power, And then, press Volume UP button in Warning Page to enter the Download Mode
4.Connect device to PC and wait till device successfully added to com port (it will turn light blue) (see image below)
5.Hit ‘Start’ to flash
6.Once it flashed successfully, you can see 'PASS' in table above the ID :COM, you can disconnect device from PC
7.Reboot device and you will have superSU in application drawer.
after rooting my mobile everything worked fine for untill i reseted my mobile. The problem is i couldnt able to connect wifi, It is showing access point name but its not getting connected. Its keep showing the msg called obtaining ip address. And i am getting an error called (Network disabled. poor connection)
so i tried to unroot it by selecting the full unroot from SuperSU icon. After clicking the option full unroot uption it say uninstalling pls wait but nothing is happening i still have that supersu and my mobile is still rooted.
so i went to samsung showroom today, they said its showing that is modified so you cant claim warranty.
please find the screenshots and help me on this i still have 10 months warranty left.
Thanks in advance.
Click to expand...
Click to collapse
Hi dude,
My suggestion
Try to flash back with stock recovery to check either you can connect to wifi or not.
if not possiblity your mother board has mess up...
Once you flash with stock recovery you can go to claim your waranthy...
norufumi said:
Hi dude,
My suggestion
Try to flash back with stock recovery to check either you can connect to wifi or not.
if not possiblity your mother board has mess up...
Once you flash with stock recovery you can go to claim your waranthy...
Click to expand...
Click to collapse
How to flash back with stock recovery can you please explain?
Hi prashanth667
I've got exactly the same issue.
Can you give me all references in your system/about device?
Did you only flash CF auto root before the issue appearing?
What was your android version?
Flash stock firmware.
Sent from my GT-N7100 using xda app-developers app
That doesn't work UtkarshGupta. I've tried several stock firmwares.
There is another big thread dealing whith this issue. Maybe you can try solutions over there.
But please prashanth667, did you only root with CF-root before the wifi issue?
asymetric said:
Hi prashanth667
I've got exactly the same issue.
Can you give me all references in your system/about device?
Did you only flash CF auto root before the issue appearing?
What was your android version?
Click to expand...
Click to collapse
i only flash CF auto root.. i dont know what to do now.. pls find the screenshoot of about device..
This happened to me, I flashed the omega rom on my phone and the wifi now working perfectly.
Sent from my GT-N7100 using xda premium
asymetric said:
That doesn't work UtkarshGupta. I've tried several stock firmwares.
There is another big thread dealing whith this issue. Maybe you can try solutions over there.
But please prashanth667, did you only root with CF-root before the wifi issue?
Click to expand...
Click to collapse
Can you pls give me to link to that thread?
yes i only rooted with CF-root. even after rooting wifi worked fine..the problem started when i did factory reset.. then wifi is not working at all but hotspot is working..
pls help how to unroot and claim the warranty..
Thanks..
UtkarshGupta said:
Flash stock firmware.
Sent from my GT-N7100 using xda app-developers app
Click to expand...
Click to collapse
How to do that ?
Hello m8, I hope that your problem is as simple as mine, but first what kind of router do you have? Tplink by mistake?
Oddly enough you said you were connected... thus I doubt it is you phone.
The problem wasn't phone itself but the router... try resseting the router.
Another issue my coworker had is to have his router accept wifi connections allowed by mac address...I do not believe this is your problem but try it anyway.
To confort you sometimes after note factory reset I get the same issue and always soved it by ressetin my own router. It hap po ened on different roms thus...
Sent from my GT-N7100 using xda app-developers app
matzone said:
Hello m8, I hope that your problem is as simple as mine, but first what kind of router do you have? Tplink by mistake?
Oddly enough you said you were connected... thus I doubt it is you phone.
The problem wasn't phone itself but the router... try resseting the router.
Another issue my coworker had is to have his router accept wifi connections allowed by mac address...I do not believe this is your problem but try it anyway.
To confort you sometimes after note factory reset I get the same issue and always soved it by ressetin my own router. It hap po ened on different roms thus...
Sent from my GT-N7100 using xda app-developers app
Click to expand...
Click to collapse
this is not my router problem, i am sure about this coz i tried this in several places like my home, hotel , and friend's house.. and i even tried to with new netgear router.. am helpless..
prashanth667 said:
this is not my router problem, i am sure about this coz i tried this in several places like my home, hotel , and friend's house.. and i even tried to with new netgear router.. am helpless..
Click to expand...
Click to collapse
Go to normal dialer screen
type *#0011#
this should take you to the service menu
now press the menu button (lower left, below screen)
select Wifi submenu
In here there is an option for wifi power saving. Turn it off.
Exit the menu
Try your wifi now.
I used to have this problem too, but suddenly fixed itself when installing a new ROM.
please help me!! clearly i am more of a noob than I thought I was!
I rooted my phone using Odin a few months ago. Then it just crapped out on me. Now it is stuck in a boot loop mode. I can get it to recovery mood and download mode. I have tried wiping the cache partition and done the factory rest. That isn't the issue. The issue is that when I have Odin open the phone isn't being recognized. it keeps saying "USB device not recognized. the last USB device you connected to this computer malfunctioned, and Windows does not recognize it". I have tried reinstalling the drivers for my Sprint S6. I have also updated the media package for my windows 8.1. But it still isn't recognizing the phone. I also tried un instaling and reinstalling. I have smart switch but still nothing. I am not entirely sure how to fix this. Please Help!! Also, in the top left hand corner where it says "kernal is not seandriod enforcing. custom binary blocked by frp lock"
I've exhausted everything best to my knowledge. I appreciate all the help I can get from you experts. Thank all in advance from this tech noob!
Gladi80rPrincess09 said:
please help me!! clearly i am more of a noob than I thought I was!
...
I've exhausted everything best to my knowledge. I appreciate all the help I can get from you experts. Thank all in advance from this tech noob!
Click to expand...
Click to collapse
Geez... that sucks, and disappointing no one has replied yet.
I hate to reply with a few of the obvious tricks- but it has happened multiple times to me that my phone won't be recognized by ODIN (or anything other than as "charging"). Usually this is solved by switching to other USB ports, and plugging-unplugging a few times, but when that fails (which it does not infrequently)- I have gotten lucky by not just restarting my computer, but actually turning it off, waiting a moment and turning it back on.
Magically sometimes that does it.
Hope that works for you, and that others more senior weigh in on this :good:
I second what spammy said.
I just spent 6 hours fixing my Sprint s6. I got it domestic unlocked and somehow near-bricked it, and then got the dreaded usb not recognized message. Shutting my laptop all the way down and letting it sit a few minutes did the trick and I was able to use Odin afterwards.
update!!
so, i got it to connect by just lifting the tongue a little. It connected to Odin. I tried to flash it using the TAR file but it keeps saying failed. Can anyone tell me why it says "custom binary blocked by frp lock" and how to fix that ? I know I have to connect it to samsung online or something but the phone is stuck in boot loop mode so I cant really do much. Like I said before I tried to flash with the 5.0.2 TAR file and ended up with the following message at the top left and corner in red and black highlight "SW REV. CHECK FAIL. DEVICE: 2. BINARY: 1" what does this mean? is there a fix? and how do I fix it? my phone is already factory rest and I lost everything so I am not concerned about that as long as I can get it to turn back on. Please help me.
update
chatovishious said:
I second what spammy said.
I just spent 6 hours fixing my Sprint s6. I got it domestic unlocked and somehow near-bricked it, and then got the dreaded usb not recognized message. Shutting my laptop all the way down and letting it sit a few minutes did the trick and I was able to use Odin afterwards.
Click to expand...
Click to collapse
spammy l said:
Geez... that sucks, and disappointing no one has replied yet.
I hate to reply with a few of the obvious tricks- but it has happened multiple times to me that my phone won't be recognized by ODIN (or anything other than as "charging"). Usually this is solved by switching to other USB ports, and plugging-unplugging a few times, but when that fails (which it does not infrequently)- I have gotten lucky by not just restarting my computer, but actually turning it off, waiting a moment and turning it back on.
Magically sometimes that does it.
Hope that works for you, and that others more senior weigh in on this :good:
Click to expand...
Click to collapse
so, i got it to connect by just lifting the tongue a little. It connected to Odin. I tried to flash it using the TAR file but it keeps saying failed. Can anyone tell me why it says "custom binary blocked by frp lock" and how to fix that ? I know I have to connect it to samsung online or something but the phone is stuck in boot loop mode so I cant really do much. Like I said before I tried to flash with the 5.0.2 TAR file and ended up with the following message at the top left and corner in red and black highlight "SW REV. CHECK FAIL. DEVICE: 2. BINARY: 1" what does this mean? is there a fix? and how do I fix it? my phone is already factory rest and I lost everything so I am not concerned about that as long as I can get it to turn back on. Please help me.
Gladi80rPrincess09 said:
so, i got it to connect by just lifting the tongue a little. It connected to Odin. I tried to flash it using the TAR file but it keeps saying failed. Can anyone tell me why it says "custom binary blocked by frp lock" and how to fix that ? I know I have to connect it to samsung online or something but the phone is stuck in boot loop mode so I cant really do much. Like I said before I tried to flash with the 5.0.2 TAR file and ended up with the following message at the top left and corner in red and black highlight "SW REV. CHECK FAIL. DEVICE: 2. BINARY: 1" what does this mean? is there a fix? and how do I fix it? my phone is already factory rest and I lost everything so I am not concerned about that as long as I can get it to turn back on. Please help me.
Click to expand...
Click to collapse
Where you previously on 5.1.1? If so I hear downgrading causes problems. Download a more recent tar.
Mine is 5.1.1 OL1 modem.
I'm betting that is your problem.
help me!
chatovishious said:
Where you previously on 5.1.1? If so I hear downgrading causes problems. Download a more recent tar.
Mine is 5.1.1 OL1 modem.
I'm betting that is your problem.
Click to expand...
Click to collapse
i can't remember if my phone is upgraded or not. i did it with 5.0.2 and ive been on the search for the 5.1.1 file. where can I find it?
Gladi80rPrincess09 said:
i can't remember if my phone is upgraded or not. i did it with 5.0.2 and ive been on the search for the 5.1.1 file. where can I find it?
Click to expand...
Click to collapse
Sounds like your USB is a bit out of wack. You need to make sure that the PC you are using is finding the device properly, loading the drivers, and allowing you to access the internal storage. Just go to "My Computer" on your PC and your device should show up and allow you to access it. Otherwise trying to use Odin will be a waste of your time.
Once you have that Odin should find it no problem. However, if your microUSB on the device is acting intermittent and you start flashing in Odin and it disconnects for a sec there will be issues. You don't want an interrupt during the flash.
If you can do all this go to this link and download Odin 3.10.6 and the OJ7 tar file: http://forum.xda-developers.com/sprint-galaxy-s6/general/how-to-to-100-stock-root-t3075448
Don't use previous version of Odin as they are confirmed to have issues flashing some tar files on the S6. If it doesn't work try doing another factory reset through stock recovery and try again.
Report back your findings to continue troubleshooting if needed.
Thank you! progress/update
CCallahan said:
Sounds like your USB is a bit out of wack. You need to make sure that the PC you are using is finding the device properly, loading the drivers, and allowing you to access the internal storage. Just go to "My Computer" on your PC and your device should show up and allow you to access it. Otherwise trying to use Odin will be a waste of your time.
Once you have that Odin should find it no problem. However, if your microUSB on the device is acting intermittent and you start flashing in Odin and it disconnects for a sec there will be issues. You don't want an interrupt during the flash.
If you can do all this go to this link and download Odin 3.10.6 and the OJ7 tar file: http://forum.xda-developers.com/sprint-galaxy-s6/general/how-to-to-100-stock-root-t3075448
Don't use previous version of Odin as they are confirmed to have issues flashing some tar files on the S6. If it doesn't work try doing another factory reset through stock recovery and try again.
Report back your findings to continue troubleshooting if needed.
Click to expand...
Click to collapse
so, i downloaded the 5.1.1 Tar file progress is that I am going to flash it. I have been using the most updated version of Odin (3.10.7) could that be causing the issue? the phone stays connected while its flashing in Odin. Once it is connected I dont mess with it? Also, please answer me if I am able to fix this issue and will i be able to get my phone booted?
Gladi80rPrincess09 said:
so, i downloaded the 5.1.1 Tar file progress is that I am going to flash it. I have been using the most updated version of Odin (3.10.7) could that be causing the issue? the phone stays connected while its flashing in Odin. Once it is connected I dont mess with it? Also, please answer me if I am able to fix this issue and will i be able to get my phone booted?
Click to expand...
Click to collapse
I have not used the 3.10.7 version yet but should not be a problem.
Download the tar file, connect the device and make sure Odin shows the device as connected/ready, hit the AP button and select your tar file, then flash and let finish. Then it will reboot automatically and boot up normally.
Try this and post your findings.
question
CCallahan said:
Sounds like your USB is a bit out of wack. You need to make sure that the PC you are using is finding the device properly, loading the drivers, and allowing you to access the internal storage. Just go to "My Computer" on your PC and your device should show up and allow you to access it. Otherwise trying to use Odin will be a waste of your time.
Once you have that Odin should find it no problem. However, if your microUSB on the device is acting intermittent and you start flashing in Odin and it disconnects for a sec there will be issues. You don't want an interrupt during the flash.
If you can do all this go to this link and download Odin 3.10.6 and the OJ7 tar file: http://forum.xda-developers.com/sprint-galaxy-s6/general/how-to-to-100-stock-root-t3075448
Don't use previous version of Odin as they are confirmed to have issues flashing some tar files on the S6. If it doesn't work try doing another factory reset through stock recovery and try again.
Report back your findings to continue troubleshooting if needed.
Click to expand...
Click to collapse
CCallahan said:
I have not used the 3.10.7 version yet but should not be a problem.
Download the tar file, connect the device and make sure Odin shows the device as connected/ready, hit the AP button and select your tar file, then flash and let finish. Then it will reboot automatically and boot up normally.
Try this and post your findings.
Click to expand...
Click to collapse
i knocked the phone off the computer desk and it disconnected from Odin while it was in progress and it said failed. The phone was in download mode and now it is stuck on a blue screen that has white triangle with exclamation point. it reads "an error has occurred while updating the device software. use the emrgency recovery function in the smart swtch pc software" what did I do?
Gladi80rPrincess09 said:
i knocked the phone off the computer desk and it disconnected from Odin while it was in progress and it said failed. The phone was in download mode and now it is stuck on a blue screen that has white triangle with exclamation point. it reads "an error has occurred while updating the device software. use the emrgency recovery function in the smart swtch pc software" what did I do?
Click to expand...
Click to collapse
Can you get the device back in download mode?
update!!
CCallahan said:
Can you get the device back in download mode?
Sent from my SM-G920P using Tapatalk
---------- Post added at 10:59 AM ---------- Previous post was at 10:54 AM ----------
Can you get the device back in download mode?
Sent from my SM-G920P using Tapatalk
Click to expand...
Click to collapse
yes, i got it back to download mode. i tried to reflash it with Odin and now it says failed. i can't turn it on or off. if i try to boot it off then it goes to that blue screen again i tried to do the smart switch thing but it doesnt recognize my device
Gladi80rPrincess09 said:
yes, i got it back to download mode. i tried to reflash it with Odin and now it says failed. i can't turn it on or off. if i try to boot it off then it goes to that blue screen again i tried to do the smart switch thing but it doesnt recognize my device
Click to expand...
Click to collapse
Dont worry about that. That's what happened to me, but that screen functions the same as Download mode. you can still flash tar files from there.
Here was the link to the tar files I used.
http://www.droidviews.com/install-latest-ol1-stock-firmware-on-sprint-galaxy-s6-and-s6-edge/
thank you for the help!!
chatovishious said:
Dont worry about that. That's what happened to me, but that screen functions the same as Download mode. you can still flash tar files from there.
Here was the link to the tar files I used.
http://www.droidviews.com/install-latest-ol1-stock-firmware-on-sprint-galaxy-s6-and-s6-edge/
Click to expand...
Click to collapse
i got it to work!!!
Gladi80rPrincess09 said:
please help me!! clearly i am more of a noob than I thought I was!
I rooted my phone using Odin a few months ago. Then it just crapped out on me. Now it is stuck in a boot loop mode. I can get it to recovery mood and download mode. I have tried wiping the cache partition and done the factory rest. That isn't the issue. The issue is that when I have Odin open the phone isn't being recognized. it keeps saying "USB device not recognized. the last USB device you connected to this computer malfunctioned, and Windows does not recognize it". I have tried reinstalling the drivers for my Sprint S6. I have also updated the media package for my windows 8.1. But it still isn't recognizing the phone. I also tried un instaling and reinstalling. I have smart switch but still nothing. I am not entirely sure how to fix this. Please Help!! Also, in the top left hand corner where it says "kernal is not seandriod enforcing. custom binary blocked by frp lock"
I've exhausted everything best to my knowledge. I appreciate all the help I can get from you experts. Thank all in advance from this tech noob!
Click to expand...
Click to collapse
Hey! Still stuck?
Poebat said:
Hey! Still stuck?
Click to expand...
Click to collapse
No according to the post above yours.
koop1955 said:
No according to the post above yours.
Click to expand...
Click to collapse
K. Sometimes something appears to work and then fails :/ happens sometimes
Thank you all for the kelp! i finally got it to work. Never again will I root my phone. Now, the only sad thing about it is that I lost all my treasured memories ( pictures and videos)
Gladi80rPrincess09 said:
Thank you all for the kelp! i finally got it to work. Never again will I root my phone. Now, the only sad thing about it is that I lost all my treasured memories ( pictures and videos)
Click to expand...
Click to collapse
nothing wrong with rooting if you know what you're doing. ?
Sent from my SM-G900P using Tapatalk
Samsung SM-T800 is basically a paperweight.
Out the outset, let me just say that I have already:
-voided my warranty and tripped KNOX (it was rooted before all of this happened)
-Tried different USB ports and USB cables
-Tried different USB drivers
My PC won't recognize it, and I have tried Universal Drivers, and Samsung USB drivers, which means Odin and ADB can't help
I can only boot into download mode
When I tr to boot into recovery, I get the "Firmware upgrade encountered an issue" message
And to add insult to injury, I can't even turn the damned thing off. Every "battery pull" (Power+Volume down) leads back to "Firmware upgrade encountered an error" message
I have been wrestling with this thing for 2 days already, scouring these forums. And every one ends with "Oh I just reloaded my stock ROM with Odin" ARGHHHHH!
Thanks in advance
OK I'm gonna start off by saying I'm trying to help you. If you get smart and angry then I'll leave you to it.
Why am I saying this? Because I've been down this road many times with people saying this that and the other doesn't work when in the end in most cases it turns out to be user error and I can tell you're frustrated.
I've read your post regarding what you've tried but you're still gonna have to bear with it if you want help.
The first thing I need to ask is, you know the difference between download mode and recovery mode? No I'm not trying to treat you like an idiot.
Sometimes the firmware error can be cleared by booting to recovery and wiping cache.
How did you end up in this scenario?
If the above doesn't work the first thing you need to do is put the tablet in download mode.
Connect the USB cable, navigate to device manager, look for something along the lines of Samsung mobile USB composite device under USB devices.
If you see an exclamation mark instead then you will have to manually install the USB composite driver.
Once you see that device listed you are ready to use odin in download mode.
ashyx said:
OK I'm gonna start off by saying I'm trying to help you. If you get smart and angry then I'll leave you to it.
Why am I saying this? Because I've been down this road many times with people saying this that and the other doesn't work when in the end in most cases it turns out to be user error and I can tell you're frustrated.
I've read your post regarding what you've tried but you're still gonna have to bear with it if you want help.
The first thing I need to ask is, you know the difference between download mode and recovery mode? No I'm not trying to treat you like an idiot.
Sometimes the firmware error can be cleared by booting to recovery and wiping cache.
How did you end up in this scenario?
If the above doesn't work the first thing you need to do is put the tablet in download mode.
Connect the USB cable, navigate to device manager, look for something along the lines of Samsung mobile USB composite device under USB devices.
If you see an exclamation mark instead then you will have to manually install the USB composite driver.
Once you see that device listed you are ready to use odin in download mode.
Click to expand...
Click to collapse
First of all, thanx for the reply. I appreciate, and i probably shouldn't have written the post after being up all night and bieng pissed...probably came off a little snarky...
Having said all of that, yeah, I'm definitely in download mode:
(on screen right now)
ODIN MODE
Product Name: SM-T800
Current Binary: Samsung Official
System Status: Official
Secure Download: Enabled
KNOX WARRANTY VOID: 1 (0x0000)
AP SWREV: A1
[Picture of Android icon]
Downloading...Do not turn off target
So, that bit is sorted out
UPDATE: I did not have my SD card in the tablet before...now I put it in and I got the "USB devices not recognized"
I go to Device Manager, find the device with the yellow exclamation, right click,
"Update driver software"
"Browse computer for driver software:
Navigate to "Program Files/Samsung/USB Drivers"
The best software for your device is already installed
Any suggestions?
And again, apologies for sounding like a jerk before
"
UPDATE 2
OK, so I took another swig at it..
downloaded "Samsung USB Driver V1..5.59"
Rebooted
Opened ODIN
[Added]
Started reinstaling firmware
[Removed]
ODIN lost connection and I got the "USB device not recognized message" again
Used a cpl different ports, no change
I am wondering if maybe it is a battery issue at this point? Because as I stated before, I havent been able to turn the tablet off...
Either it is in download mode, or it is in "FIrmware upgrade encountered an issue" on screen
Thanks in advance
Destro728 said:
UPDATE 2
OK, so I took another swig at it..
downloaded "Samsung USB Driver V1..5.59"
Rebooted
Opened ODIN
[Added]
Started reinstaling firmware
[Removed]
Click to expand...
Click to collapse
OK this looks like you have the driver installed so you shouldn't have the exclamation mark in device manager.
You can however install the driver manually.
Right click the device with exclamation mark, choose browse my computer, let me pick from a list of drivers. Look for Samsung Mobile CDC composite device, click next.
Driver should now install.
There are several reasons for the USB not recognized error. Most common is a bad USB cable, bad USB port or driver conflicts.
Ensure the ports are native and not an add-on card.
I suggest a completely different cable first.
Whatever happens don't move the device or cable when flashing.
Also get some charge in the device with the stock charger.
If you still get issues installing the stock Firmware then I suggest trying to install my latest build of TWRP.
With this we have more options and can install the stock Firmware with it.
Thanks for response
Ok, I used a totally different laptop and ODIN worked fine, I dunno what the deal was...but now i have a different problem...
I seem to be stuck in a "Wifi Turning on..." loop
The Wifi never comes on though
I have seen other posts about this, but they all seems to come back to " factory reset" (which I did two more times today) or verify the date on the device (which I have also done)
Is it possible to download a radio image ONLY? Because I am wondering if that is the problem....
Destro728 said:
Thanks for response
Ok, I used a totally different laptop and ODIN worked fine, I dunno what the deal was...but now i have a different problem...
I seem to be stuck in a "Wifi Turning on..." loop
The Wifi never comes on though
I have seen other posts about this, but they all seems to come back to " factory reset" (which I did two more times today) or verify the date on the device (which I have also done)
Is it possible to download a radio image ONLY? Because I am wondering if that is the problem....
Click to expand...
Click to collapse
Most likely a baseband issue.
You need to use the correct firmware for your device and region.
Did you flash the whole firmware?
Yeah, downloaded the whole firmware
Couldn't find version for USA proper...ended up using XEF (which is France I think)
Build number LRX22G.T800XXU1BOCC (Lollipop)
Destro728 said:
Yeah, downloaded the whole firmware
Couldn't find version for USA proper...ended up using XEF (which is France I think)
Build number LRX22G.T800XXU1BOCC (Lollipop)
Click to expand...
Click to collapse
USA is XAR(Cellular South)
http://www.sammobile.com/firmwares/download/64107/T800XXU1BOL1_T800XAR1BOK1_XAR/
Ah, I didn't think I should use that one since my tablet is the WiFi model, not the LTE model
But I will give it a shot!
Thanks!
Destro728 said:
Ah, I didn't think I should use that one since my tablet is the WiFi model, not the LTE model
But I will give it a shot!
Thanks!
Click to expand...
Click to collapse
That is for the wifi model. LTE model is T805.
ashyx said:
That is for the wifi model. LTE model is T805.
Click to expand...
Click to collapse
Ah. The "Cellular South" part threw me off
Unfortunately, still didn't work as far as getting the WiFi and Bluetooth working.
I refrlashed the firmware
Did a cpl factory resets
Still nothing
I'm thinking I should root it and see if some file permissions are screwed up or something. ..
Sent from my SAMSUNG-SM-G870A using XDA-Developers mobile app
UPDATE: I rooted with CF AutoRoot and installed Custom recovery TWRP
did another factory reset
and still no Wifi/Bluetooth
I'm out of ideas at this point....
Destro728 said:
UPDATE: I rooted with CF AutoRoot and installed Custom recovery TWRP
did another factory reset
and still no Wifi/Bluetooth
I'm out of ideas at this point....
Click to expand...
Click to collapse
Did the wifi work before you obtained this device?
If all partitions flashed successfully then the wifi should be working.
What is your baseband build number reported as in settings?
Also check your IMEI no.
If that is the default IMEI instead of the original then someone may have trashed the EFS partition.
By the way are you certain this is a t800 and not a t805 or t807?
The Wifi went out a few days ago, tried a factory reset first
Then I remembered the last time this happened I did a firmware re-flash to fix it
It was during the re-flash where I ran into problems and I came to the forum.
I attached a screenshot. Model definitely SM-T800, but no IMEI and no Baseband build...
Thanks!
Destro728 said:
The Wifi went out a few days ago, tried a factory reset first
Then I remembered the last time this happened I did a firmware re-flash to fix it
It was during the re-flash where I ran into problems and I came to the forum.
I attached a screenshot. Model definitely SM-T800, but no IMEI and no Baseband build...
Thanks!
Click to expand...
Click to collapse
Baseband probably doesn't show because it's wifi only model.
However it's strange there is no Status page.
You can get this info using an app called Samsung phone info on play.
ashyx said:
Baseband probably doesn't show because it's wifi only model.
However it's strange there is no Status page.
You can get this info using an app called Samsung phone info on play.
Click to expand...
Click to collapse
Ironically, with no WIfi access...hahahahaa....
I will try to find the apk and sideload it
I sideloaded the Samsung phone info app...
Attached screenshots of the tablet info
What's immediately apparent is no IMEI number. This is a problem.
Is your EFS folder accessible?
while trying to root my phone (GS-960F) my device bricked so i tried to restore my twrp back up. however during this process my phone turned off even tho it was fully charged and wont turn on unless connected to ac, if i try to connect it to my computer it wont turn on. please help me!
owenlad said:
while trying to root my phone (GS-960F) my device bricked so i tried to restore my twrp back up. however during this process my phone turned off even tho it was fully charged and wont turn on unless connected to ac, if i try to connect it to my computer it wont turn on. please help me!
Click to expand...
Click to collapse
I would attempt a odin stock restore next
owenlad said:
while trying to root my phone (GS-960F) my device bricked so i tried to restore my twrp back up. however during this process my phone turned off even tho it was fully charged and wont turn on unless connected to ac, if i try to connect it to my computer it wont turn on. please help me!
Click to expand...
Click to collapse
How long have you left it connected to AC for?
Maybe leave it for a few hours to ensure it is 100% charged first, try different USB ports on the PC to see if you have one (USB3.0) with higher power output
TheMadScientist said:
I would attempt a odin stock restore next
Click to expand...
Click to collapse
when i tried to do an odin install it says "W REV. CHECK FAIL. DEVICE:2. Binary:1" i have looked at solutions and people say that you must have newest firmware, which i myself have downloaded and it still wont work...
owenlad said:
when i tried to do an odin install it says "W REV. CHECK FAIL. DEVICE:2. Binary:1" i have looked at solutions and people say that you must have newest firmware, which i myself have downloaded and it still wont work...
Click to expand...
Click to collapse
That error is flashing older firmware than what is on the device
You seemed to have downloaded older firmware than on the device
TheMadScientist said:
That error is flashing older firmware than what is on the device
You seemed to have downloaded older firmware than on the device
Click to expand...
Click to collapse
hmm ive looked and tried to find the newest firmware and none of them seemed to be the newest one
the problem ive got at the moment is that when i take it out of my ac connection it just turns off and when it is plugged in it says "an error has occured while updating device....."
so i cant even try odin on it now
owenlad said:
when i tried to do an odin install it says "W REV. CHECK FAIL. DEVICE:2. Binary:1" i have looked at solutions and people say that you must have newest firmware, which i myself have downloaded and it still wont work...
Click to expand...
Click to collapse
That's the bootloader error, you need a bootloader firmware equal to or higher than the version the phone is running (B:1 or B:2 in download mode)
And firmware shows BL version here
G960FXXU2BRGA
*Detection* said:
That's the bootloader error, you need a bootloader firmware equal to or higher than the version the phone is running (B:1 or B:2 in download mode)
And firmware shows BL version here
G960FXXU2BRGA
Click to expand...
Click to collapse
AHH okay, the way you explained it helped. I spent a few hours trying to find one that match the description and it worked after switching pc and trying Odin. thanks dude
owenlad said:
hmm ive looked and tried to find the newest firmware and none of them seemed to be the newest one
the problem ive got at the moment is that when i take it out of my ac connection it just turns off and when it is plugged in it says "an error has occured while updating device....."
so i cant even try odin on it now
Click to expand...
Click to collapse
an error has occured while updating device.
You can still use odin It will detect in this screen as well