Develop Bugs

Ported CM13 From Mediapad X2 to Mediapad M2 8.0

WARNING, YOU ARE INSTALLING AN UNOFFICIAL BUILD AT YOUR OWN RISK. MYSELF OR ANY OF THE CONTRIBUTORS ARE NOT HELD LIABLE FOR ANY DAMAGE OR DESTRUCTION YOU CAUSE TO YOUR DEVICE BY INSTALLING THE ROM.
Installation requirements:
1. Your device must have any android 6 rom installed already
2. Twrp recovery must be installed
Installation:
1. Restart device into twrp recovery mode
2. Make a backup of your firmware
3. Do a full wipe! (System, Data, Cache, Dalvik Cache, (Internal is optional)
4. Install CM13_Port.zip
5. If you need google apps and google services install the desired gapps pack .zip file
6. If you want root access, install SuperSU_v2_71.zip (However it shows under Magisk v12.0 is installed and it says properly rooted)
Download
Rom: Download
Gapps: Download
SuperSU_v2_71.zip: Download
Working:
Bluetooth
Not Working:
-Camera
-GPS (Maybe)
-Wifi
-Sim not detected (However it detects that the sim is a T Mobile sim)
-Smart-cover detection
I want to make this very clear.....I am new on this one. And I need as much help as I can get. I have personally installed this rom on my Mediapad M2 802L to see if this would work. Purpose of doing this, to possibly ignite some devs or part time devs to offer their help instead of allowing this device and thread to die.
XDA:DevDB Information
CM13 Port, ROM for the Huawei MediaPad M2
Contributors
Dvalin21, gaguga, papsi, ajsmsg78
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
Based On: Unofficial CyanogenMod
Version Information
Status: Alpha
Created 2017-06-30
Last Updated 2017-07-08

Nice work !!! Im glad to see people working on this device i stopped using mine just because of emui i can't wait to test it but how can i unlock my bootloader and flash twrp after 6.0 update there is no oem unlock in dev settings

@Dvalin21 might I ask you to add 8.0 to the OP name, as one might be mistaken and think this ROM has been ported to M2 10.0 A01-L instead of the smaller M2 8.0 variant.
Sent from my htc_pmeuhl using XDA Labs

5m4r7ph0n36uru said:
@Dvalin21 might I ask you to add 8.0 to the OP name, as one might be mistaken and think this ROM has been ported to M2 10.0 A01-L instead of the smaller M2 8.0 variant.
Sent from my htc_pmeuhl using XDA Labs
Click to expand...
Click to collapse
Ask and you shall receive

Tried it on my Mediapad M2 801w but it gets stuck on the Huawei boot screen. I left it for about 30 minutes because I know it takes longer on first boot. I might try again without installing gapps.
Thanks for your contribution and hard work to produce a custom rom for this tablet.

dinkmack said:
Tried it on my Mediapad M2 801w but it gets stuck on the Huawei boot screen. I left it for about 30 minutes because I know it takes longer on first boot. I might try again without installing gapps.
Thanks for your contribution and hard work to produce a custom rom for this tablet.
Click to expand...
Click to collapse
Thank you for assisting. I have a feeling this project is really going to be a community effort and not just on my shoulders.
Note: I was suggested to try bring the libril files from the stock rom over to this one. This should make a big difference. Ill try it myself when I get some more time.

[ROM] TWRP Flashable Stock Firmware [7.0][8.1.0]

[size=+2]TWRP Flashable Stock builds for the Moto G4/G4 Plus[/size]
As you all know, Moto has finally released the first Oreo soak test for select users to test. Thanks to @rajatgupta1998, we all get to try it out
[size=+1]About these builds[/size]
This is the stock firmware, repackaged to be flashable in TWRP Recovery. In an effort to make these zips safer, I have removed all bootloader and gpt (partition table) related items.
[size=+1]Requirements[/size]
-> Unlocked bootloader
-> TWRP Recovery Installed (or booted)
[size=+1]Installation[/size]
-> Download the TWRP Flashable zip (Links below)
-> Place zip on device (internal or external storage)
-> Reboot to TWRP (or boot it)
-> Flash zip && Profit
[size=+1]Downloads[/size]
Nougat 7.0 (April 1st Security Patch)
• AFH -- TWRP-athene-7.0.0-NPJS25.93-14-18.zip
• G-Drive -- TWRP-athene-7.0.0-NPJS25.93-14-18.zip
md5sum == 71cab7a1bdebb067c569366dcaa26968
Oreo 8.1.0 Soak Test (November 1st Security Patch)
• AFH -- TWRP-athene-8.1.0-OPJ28.108.zip
• G-Drive -- TWRP-athene-8.1.0-OPJ28.108.zip
md5sum == c995bcb22215346e362195447de686f8
Oreo 8.1.0 (December 1st Security Patch)
• AFH -- TWRP-athene-8.1.0-OPJ28.111-12.zip
• G-Drive -- TWRP-athene-8.1.0-OPJ28.111-12.zip
md5sum == d7f7a0acdbb8e4bd24fa89e8513ec21c
Oreo 8.1.0 (December 1st Security Patch)
• AFH -- TWRP-athene-8.1.0-OPJ28.111-22.zip <-- coming soon
• G-Drive -- TWRP-athene-8.1.0-OPJ28.111-22.zip
md5sum == coming soon
[size=+1]Other Notes[/size]
* If you want to root, use Magisk and just flash in TWRP immediately after flashing the newest Oreo build. The latest build now fully passes SafetyNet and shows the device as being Certified in the Play Store.
* If you're already on the previous Oreo build (OPJ28.108 - November Security Patch), you can easily update to the latest Oreo build (OPJ28.111-12 - December Security Patch) by dirty flashing. If you want to keep root, you'll still need to flash Magisk again after flashing the newer build.
* To root the Nougat build(s), you will need to flash a custom kernel, then flash Magisk (same as before).
[size=+2]XDA:DevDB Information[/size]
[size=+1]TWRP Flashable Stock Builds, ROM for the Moto G4/G4 Plus[/size]
Contributors
@Jleeblanch, @rajatgupta1998, Motorola Mobility LLC
ROM OS Version: Android Oreo 8.1.0 - December 1st Security Patch
ROM Kernel: v3.10.84
Version Information:
Status: Beta
Created: 2018-11-26
Last Updated: 2019-01-09

**Reserved**

Coming from Pixel Experience 9.0 rom, wiped and installed. Working great so far. I hope we see an official rom soon.

zerocoolriddler said:
Coming from Pixel Experience 9.0 rom, wiped and installed. Working great so far. I hope we see an official rom soon.
Click to expand...
Click to collapse
these ROM have the same problems with camera like a soak test bulid?
all wipes needed to install these ROM?

vlrgamaley said:
these ROM have the same problems with camera like a soak test bulid?
Click to expand...
Click to collapse
This IS the Moto Soak test build. I've just made it TWRP flashable and safer for everyone to use. But yes, to answer your question, the issue with the Camera and Flashlight tile taking a few (5 or more) seconds to open is present here. There isn't anything I can do about that, however when Moto releases a future OTA update and have fixed the issue, I will make a new zip and post it here.
I will also make a nougat build of NPJS25.93-14-18 that is TWRP flashable as well for anyone who would like to be on stock nougat or easily revert back to stock nougat.

Thanks for your Hard Work.

Jleeblanch said:
ROM OS Version: Android Oreo 8.1.0 - November 1st Security Patch
ROM Kernel: v3.10.84
Click to expand...
Click to collapse
For curiosity: Would any of the (32 bit) custom kernels work with this ROM?

Thanks, I guess I won't be bored until I decide to unlock my G6 Plus

Jleeblanch said:
[size=+1]TWRP Flashable Stock builds for the Moto G4/G4 Plus[/size]
As you all know, Moto has finally released the first Oreo soak test for select users to test. Thanks to @rajatgupta1998, we all get to try it out
About this build
What is different about this versus what's already available? Basically what I have done is taken the previous 7.0 (nougat) firmware and directly patched it using the 8.1.0 (oreo) OTA zip from this thread. In an effort to make this build safer for everyone to use, I have left out any bootloader related items which is what can potentially prevent you from being able to downgrade. If this had been an official release, I would also have removed dm-verity (and forced encryption) as needed also. But being this is a test build from Moto, they have yet to enable such features. Now, on to the good stuff.
Requirements
-> Unlocked bootloader
-> TWRP Recovery Installed (or booted)
-> You may or may not need to be on stock nougat prior, need confirmation on this
Installation
-> Download the TWRP Flashable zip (Links below)
-> Place zip on device (internal storage or external)
-> Reboot to TWRP (or boot it)
-> Flash zip && Profit
Downloads
Oreo 8.1.0 Soak Test (November 1st Security Patch)
AFH - TWRP-athene-OPJ28.108.zip
G-Drive - TWRP-athene-OPJ28.108.zip
md5sum = c995bcb22215346e362195447de686f8
Other Notes
Currently as mentioned in the other thread, the build doesn't fully pass SafetyNet as it's a test release. You can use Magisk modules to fix this if needed.
You can also easily root by flashing Magisk immediately after the TWRP zip or any time afterwards.
[size=+2]XDA:DevDB Information[/size]
[size=+1]TWRP Flashable Stock Builds, ROM for the Moto G4/G4 Plus[/size]
Contributors
@Jleeblanch, @rajatgupta1998, Motorola Mobility LLC
ROM OS Version: Android Oreo 8.1.0 - November 1st Security Patch
ROM Kernel: v3.10.84
Version Information:
Status: Beta
Created: 2018-11-26
Last Updated: 2018-11-26
Click to expand...
Click to collapse
Thanx your .zip fixed the sim issues . Thanx mate

Jleeblanch said:
This IS the Moto Soak test build. I've just made it TWRP flashable and safer for everyone to use. But yes, to answer your question, the issue with the Camera and Flashlight tile taking a few (5 or more) seconds to open is present here. There isn't anything I can do about that, however when Moto releases a future OTA update and have fixed the issue, I will make a new zip and post it here.
I will also make a nougat build of NPJS25.93-14-18 that is TWRP flashable as well for anyone who would like to be on stock nougat or easily revert back to stock nougat.
Click to expand...
Click to collapse
Waiting for the Nougat build! Really need to go back to stock. Thank you for your work!

Awesome work dont stop keep up the good work

I`ve had previously RR 5.8 (Nougat 7.1, no custom kernels) and try install your ROM (without wipes, like you describe in instruction). Result? Bootloop. I have Moto 2g RAM/16 Gb Flash, install through rajatgupta recovery v 3.2.1-r3. Try now with wipes, but i don`t have confidence for good result.
try again with wipes, works normally. woah

jer194 said:
For curiosity: Would any of the (32 bit) custom kernels work with this ROM?
Click to expand...
Click to collapse
I doubt any of the stock kernels currently available would work as they're intended for nougat (7.0).
corlatemanuel said:
Thanks, I guess I won't be bored until I decide to unlock my G6 Plus
Click to expand...
Click to collapse
Fair enough. I'm surprised you haven't unlocked the bootloader yet, LineageOS is pretty good for the G6+ and also is used as a base ROM for flashing GSI's. I'll be making a stock based custom kernel (and one for the custom rom's/GSI's soon too).
DanFaraday777 said:
Waiting for the Nougat build! Really need to go back to stock. Thank you for your work!
Click to expand...
Click to collapse
I gotta finish up some TWRP flashable builds for the Moto G6 and then I'll upload the one I made for nougat when I upload those [emoji41]

luv u
thanks a lot

Thanks for zip :good:

What do you mean by "Stock nougat prior"?
Sorry for the dump question

Henry Markle said:
What do you mean by "Stock nougat prior"?
Sorry for the dump question
Click to expand...
Click to collapse
I mean the latest stock nougat build NPJS25.93-14-18

jer194 said:
For curiosity: Would any of the (32 bit) custom kernels work with this ROM?
Click to expand...
Click to collapse
To expand on Jleeblanch's reply, you may have to wait for Motorola to release the Oreo kernel source code, so developers can work on improving the kernel. Best thing to do is to check the Motorola Mobility GitHub page every so often, where you may see a request for the Oreo source code for our device appear https://github.com/MotorolaMobilityLLC/kernel-msm/issues Once there's a request made, Motorola should release the code when it's ready for release and then pave the way for custom Oreo kernels

echo92 said:
To expand on Jleeblanch's reply, you may have to wait for Motorola to release the Oreo kernel source code, so developers can work on improving the kernel. Best thing to do is to check the Motorola Mobility GitHub page every so often, where you may see a request for the Oreo source code for our device appear https://github.com/MotorolaMobilityLLC/kernel-msm/issues Once there's a request made, Motorola should release the code when it's ready for release and then pave the way for custom Oreo kernels
Click to expand...
Click to collapse
I would make the request myself, same as I've done for other devices (currently have a request up for beckham) but being that this is supposed to be a private soak test, not sure if they'll appreciate it just yet. But best believe, when they release the official Oreo build, I'll be all over it (assuming someone doesn't beat me to it [emoji6])

Jleeblanch said:
I would make the request myself, same as I've done for other devices (currently have a request up for beckham) but being that this is supposed to be a private soak test, not sure if they're appreciate it just yet. But best believe, when they release the official Oreo build, I'll be all over it (assuming someone doesn't beat me to it [emoji6])
Click to expand...
Click to collapse
Oh yup, it'd probably be a bit soon to put in a request, and I imagine they may change the kernel source code for the final release anyway (e.g. if they update to the latest security patch). Thanks for keeping a close eye on it - exciting times ahead

[16-Feb-2019][8.0] Port for Xiaomi Mi5s to Xiaomi Mi5, based on xiaomi.eu releases

This is a port from Mi5s to Mi5.
Since Xiaomi stopped development for Mi5, this work is based on the weekly releases of Xiaomi.eu.
Using mi5s kernel.
Weekly updates are expected.
Downloads:
Latest
18-02-2019 beta
18-02-2019 Mi6 Camera
18-02-2019 Alpha test build
16-02-2019 Rom
(mega)
16-2-19 Patch
Telegram group:
https://t.me/joinchat/GEMFDUTSNjgqUapg1qfT4A
All credits to @aaduo01
Screenshots will be added later.
XDA:DevDB Information
Xiaomi Mi5 port from Mi5s, ROM for the Xiaomi Mi 5
Contributors
hellfreezover, aaduo01
ROM OS Version: 8.x Oreo
Version Information
Status: Beta
Current Beta Version: 18-02-2019
Created 2019-02-16
Last Updated 2019-02-18

Reserved
Installation:
Your phone must be unlocked.
Xiaomi devices:
* Install TWRP via Fastboot mode, then install our ROM
*
Code:
Code:
fastboot flash recovery twrp.img
fastboot boot twrp.img
* TWRP Recovery Zip DOWNLOAD or TWRP.ME
* For ROOT install Magisk (may cause lags and fingerprint issue) in TWRP and reboot one more time after install to get rid of system lags
ROMs for devices with locked bootloader:
* Unlock your first bootloader here http://en.miui.com/unlock/
* Install TWRP via Fastboot mode, then install our ROM
* TWRP Recovery Zip DOWNLOAD or TWRP.ME
* Wipe /data partition (NEVER wipe System or Persist!)
* Copy our ROM to the internal storage
* Install our ROM
* Reboot
* done
Installation via TWRP:
- Download zip to internal storage
- Updater - Menu (...) - Reboot to Recovery
- Clear systtem, dalvik, cache partitions.
- Install - Select zip
- Install Relevant Patches
- Reboot
- Done
Changelog: (Latest)
Revert Camera to older rev.
Removed updater.
Better stability.
Battery capacity shows 3200...
16-02-2019
System UI
New - Dark Mode for supported apps on Android 8.x/9.0 moved to Dev settings
New - Dark Mode automatic mode by sunset/sunrise
Attention: You might have to reconfigure your Alarms in case they were reset.
24-01-2019
System UI
New - Dark Mode for supported apps on Android 9.0
SMS
Fix - FC when typing in search bar
Fix - Contacts can't be recognized
Fix - Deleting multiple SMS messages
Weather
Fix - Couldn't connect to network
Gallery
Fix - Fixed blur studio FC
Settings
Fix - Unable to change "Preferred network type" for SIM 2
Fix - Unable to add new APNs

Reserved
Older releases:
24-01-2019

thanks

Great news,thanks.

Great news, continue...

Great news,thanks... ♥

Great, Thanks for the effort dev. :good:

Its amazing news and hard work, thanks!!!!:good:

Last release (9.2.14) https://mega.nz/#!St9QSKAB!pHnF7J3Br1f_ZHQR3kv_xn8WCesYvq5Xi2ZLOt10Lfw
Please, update link OP. Because it still displays 9.1.24 as the last and current one.

Thanks, anyone try this?
Any bugs or any feature added to latest China stable (10.2)?

Nothing is like MIUI...
Glad to see that there is Resistance to xiaomi's plan to abanton Mi5...
I'm currently on RevolutionOS with Darkness kernel which is fantasticly smooth and fast but an issue with with my Amazfit Watch make me nervous...
---------- Post added at 01:37 PM ---------- Previous post was at 01:32 PM ----------
hellfreezover said:
This is a port from Mi5s to Mi5.
Since Xiaomi stopped development for Mi5, this work is based on the weekly releases of Xiaomi.eu.
Using mi5s kernel.
Weekly updates are expected.
Promising...
Click to expand...
Click to collapse

Just installed it today. So far no issues. Great work. You guys are amazing.

Great news,thanks... ♥

And telegram group: https://t.me/joinchat/GEMFDUTSNjgqUapg1qfT4A
Pls op update

Thanks for your work..You have alive mi5...please continue

RevolutionOs use xiaomi.eu to base just add app and build.prop tweak nothing more

harris123424 said:
And telegram group: https://t.me/joinchat/GEMFDUTSNjgqUapg1qfT4A
Pls op update
Click to expand...
Click to collapse
Done.

is there possibility of flashed the rom on a global development? the wipe is he obliged? OTA updates will see the day? great job anyway!
Envoyé de mon MI 5 en utilisant Tapatalk

how to instal this?

[ROM][9]J701F OneUI Port for Galaxy J7 2016/NXT

Hello. This is my J701F OneUI port for J710F
I've ported J701F OneUI TO J710X
So first. What is OneUI:
One UI is a software overlay developed by Samsung Electronics for its Android devices. Succeeding Samsung Experience and TouchWiz, it is designed to be further streamlined, with specific optimizations to ease one-handed use of smartphones with large screens. It was unveiled at Samsung's developer conference in 2018, and first introduced as part of Samsung firmware updates to Android 9.0 "Pie".
Warning: Flash only on J710X|J701X.
Features:
Blue Light Filter
Debloated
De-Knoxed
Some tweaks
Can be rooted(fixes in kernel)
Latest Camera UI
Im not pro in making these lists so idk what else to write here
Has support for Gcam
Bugs:
NFC(J710X)
Download​
V2.1
Changelogs:
HTML:
2019-06-18(V2.1): Use Helios kernel, update apps to latest, update to J701FXXU6CSF2, support for J701F itself, fix model detection, support for gcam, fixed smart view.
2019-06-14(V2): Fix CSC, Display crashes, other kernel updates.
2019-06-11(V1): Initial release
##########################################################################
Hit thanks​
XDA:DevDB Information
OneUI, ROM for the Samsung Galaxy J7
Contributors
ORIGINALNAME123, AnanJaser1211, DarkLord1731
Source Code: http://github.com/j72016/oxygen-j7xelte
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.x
ROM Firmware Required: Oreo Bootloader
Based On: Samsung
Version Information
Status: Stable
Current Stable Version: v1
Stable Release Date: 2019-06-11
Created 2019-06-11
Last Updated 2019-06-23

Hi, any Screenshots and more changelogs? Thanks for your job

Oh boy oh boy, new Pie+OneUI, downloading right away!
Thanks!

Great! I'm downloading

what is the difference between Refined pie, Blacked OS and this ROM

Radio?

mmxandy said:
what is the difference between Refined pie, Blacked OS and this ROM
Click to expand...
Click to collapse
Yep. Do you have any bug?
What's your phone model?

I have installed this on my device - J710F
Works perfectly
Radio is included
No Bugs as yet.
at start WiFi didn't work but i flashed a WiFi.zip separately and now its working.
Overall BEST Pie Rom.
Bigups to the Developers - Thank you so much and keep up the good work.

Rogerdat914 said:
I have installed this on my device - J710F
Works perfectly
Radio is included
No Bugs as yet.
at start WiFi didn't work but i flashed a WiFi.zip separately and now its working.
Overall BEST Pie Rom.
Bigups to the Developers - Thank you so much and keep up the good work.
Click to expand...
Click to collapse
How to turn headsup off? I also did ADB, but did not work.

I have same problem, but where can I download WiFi.zip for fix the Wifi problem

Try these.
If the first try don't work try again.
https://we.tl/t-KvKmdMkUOG

Still no Luck, more than 10 x tries .....

guys install oxygen kernel ONE-UI - PIE znd for wi-fi working

How the steps ?
1. flash rom
2. flash oxygen
3. flash wifi fix
are these steps right ? Thanks

Bugs: dont mount data via twrp
Show message error when after boot
When go Deepsleep is shoutdown
Fix??

ROM froze up randomly in deep sleep, so basically not usable for me. When I tried to wipe in TWRP, it couldn't access the partitions, had to flash full stock via Odin. J710FN.
EDIT:
juankarlitrox said:
Bugs: dont mount data via twrp
Show message error when after boot
When go Deepsleep is shoutdown
Click to expand...
Click to collapse
Basically this.

gofur.my said:
i have same problem, but where can i download wifi.zip for fix the wifi problem
Click to expand...
Click to collapse
send me pm in telegram @MojtabaRajabi7

for fixing data and wifi your need istalled oxygen kernel for pie android!

Edge Panel Works?

juankarlitrox said:
Bugs: dont mount data via twrp
Show message error when after boot
When go Deepsleep is shoutdown
Fix??
Click to expand...
Click to collapse
fixed deepsleep. will post soon

[Q] Pixel Experience 10

PixelExperience for Xiaomi Mi Note 3 [jason]
What is this?
Pixel Experience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, bootanimation)
Our mission is to offer the maximum possible stability and security, along with essential features for the proper functioning of the device
Based on Android 10.0
Bugs
*VoLTE
*Tell me..
DON'T FLASH GAPPS, ALREADY INCLUDED
Download Latest
(You NEED Official TWRP)
Liked my work? You can support me by Paypal: Here​
Android OS version: 10.0.0_r33
Security patch level: April 2020
Source code: [url]https://github.com/PixelExperience[/url]
ROM Developer: jhenrique09
​
XDA:DevDB Information
pixelexperience-q-jason, ROM for the Xiaomi Mi Note 3
Contributors
EnesSastim, dianlujitao
Source Code: [url]https://github.com/EnesSastim/kernel_xiaomi_jason[/URL]
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required: Latest Firmware
Version Information
Status: Experimental
Created 2019-09-18
Last Updated 2020-04-16

Changelog
09-18
* initial release
09-25
* fixed aptX
11-26
* Updated Power hal to 1.2
* Updated WFD blobs from LA.UM.8.2.r1-04000-sdm660.0
* Updated Graphics, Perf, ANT, TimeService blobs from LA.UM.8.2.r1-04300-sdm660.0
* SELinux Enforcing

Nice @EnesSastim , Everything Working...
[ i'll Add Some Screenshots to this Post ]

What's different between regular Mi Note 3 TWRP and SAR? Can we use SAR as the standard one or do we have to reflash the other TWRP to be able to use Lineage OS etc?

diosdetiempo said:
What's different between regular Mi Note 3 TWRP and SAR? Can we use SAR as the standard one or do we have to reflash the other TWRP to be able to use Lineage OS etc?
Click to expand...
Click to collapse
SAR means System-as-root and with SAR, the ramdisk is in system, not in boot.img. I switched to SAR because Magisk isnt working with non-SAR. As your question, no you cant use SAR TWRP on other roms...

diosdetiempo said:
What's different between regular Mi Note 3 TWRP and SAR? Can we use SAR as the standard one or do we have to reflash the other TWRP to be able to use Lineage OS etc?
Click to expand...
Click to collapse
From Android 10 the rootfs is integrated into the system image, implicitly, which is called a system-as-root.
Usually, the root filesystem (rootfs) contains the in-memory mount points to /system, /etc, /sys etc. partitions.
With the system-as-root concept, the above rootfs mount points will be like following:
/system/system
/system/etc
/system/sys
and so on...
With these changes the TWRP or the GApps scripts etc. have to know that the etc mount point is now /system/etc and not like earlier /etc and so on for other partitions as well.
At least for Mi Note 3, Android 10 has this change but not the earlier Android versions. Earlier TWRPs will not work on Android 10 and this SAR TWRP will not work on other earlier Android versions.
I hope this explanation will be helpful to understand the system-as-root concept which was earlier introduced in Android Pie.
SAR was must for new devices launched with Android Pie but it was optional for devices upgrading to Android Pie from Oreo or earlier versions.
But from Android 10 the SAR has been the standard and you cannot change it, as far as I know.

Thank you for your explanations! I guess I'll wait until the kinks are ironed out in this ROM before making the switch.

Photomath's camera hasn't worked since latest PE Pie.
upd: fixed by app developer

Hi, Clean flash required from Pixel Experience 9?

samgcw said:
Hi, Clean flash required from Pixel Experience 9?
Click to expand...
Click to collapse
Yes, rom is good. But I can't found working Google camera on it

Can't download files from Google Chrome
upd: fixed

There is a problem with bluetooth. Turns on and off while listening to music. In phone mode, it works fine, sort of.

Cant find gcam. Anyone found??

Bug: i cant use bluetooth with BT Soundbars and speakers, ex: Bluedio TS5, but i can use with Redmi Airdots

Bugs I found so far:
WiFi signal sometimes can drop and disconnect from my asus rt ac51u.
Overall system performance is quite slow.
Battery drains a little bit faster than PE9.
Lockscreen image sometimes draws in small window (2/5 of screen) and then redraws itself normally.
Fingerprint aunth is buggy. Some apps get crashes.
Gpay and my bank app doesn't work with nfc.

Anyone have working MIUI camera on this rom?

do i need to flash SAR-TWRP first? or i can just flash this rom with normal TWRP? Has anyone tried?

Gaurav9372 said:
do i need to flash SAR-TWRP first? or i can just flash this rom with normal TWRP? Has anyone tried?
Click to expand...
Click to collapse
Yes. You do need to flash sar-twrp first.
Please read comments next time.

cons: mic sounds terrible
pros: better battery life than PE 9
system wide dark mode is a battery saver
the forward bar for spotify in notifications is a brilliant idea

Please, can I know the detail step by step procedures for the installation of twrp and that custom rom because I'm not familiar with those stuffs.
And I also want to know that whether I need to backup my data or not.