Ported CM13 From Mediapad X2 to Mediapad M2 8.0 - Huawei MediaPad M2

WARNING, YOU ARE INSTALLING AN UNOFFICIAL BUILD AT YOUR OWN RISK. MYSELF OR ANY OF THE CONTRIBUTORS ARE NOT HELD LIABLE FOR ANY DAMAGE OR DESTRUCTION YOU CAUSE TO YOUR DEVICE BY INSTALLING THE ROM.
Installation requirements:
1. Your device must have any android 6 rom installed already
2. Twrp recovery must be installed
Installation:
1. Restart device into twrp recovery mode
2. Make a backup of your firmware
3. Do a full wipe! (System, Data, Cache, Dalvik Cache, (Internal is optional)
4. Install CM13_Port.zip
5. If you need google apps and google services install the desired gapps pack .zip file
6. If you want root access, install SuperSU_v2_71.zip (However it shows under Magisk v12.0 is installed and it says properly rooted)
Download
Rom: Download
Gapps: Download
SuperSU_v2_71.zip: Download
Working:
Bluetooth
Not Working:
-Camera
-GPS (Maybe)
-Wifi
-Sim not detected (However it detects that the sim is a T Mobile sim)
-Smart-cover detection
I want to make this very clear.....I am new on this one. And I need as much help as I can get. I have personally installed this rom on my Mediapad M2 802L to see if this would work. Purpose of doing this, to possibly ignite some devs or part time devs to offer their help instead of allowing this device and thread to die.
XDA:DevDB Information
CM13 Port, ROM for the Huawei MediaPad M2
Contributors
Dvalin21, gaguga, papsi, ajsmsg78
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
Based On: Unofficial CyanogenMod
Version Information
Status: Alpha
Created 2017-06-30
Last Updated 2017-07-08

Nice work !!! Im glad to see people working on this device i stopped using mine just because of emui i can't wait to test it but how can i unlock my bootloader and flash twrp after 6.0 update there is no oem unlock in dev settings

@Dvalin21 might I ask you to add 8.0 to the OP name, as one might be mistaken and think this ROM has been ported to M2 10.0 A01-L instead of the smaller M2 8.0 variant.
Sent from my htc_pmeuhl using XDA Labs

5m4r7ph0n36uru said:
@Dvalin21 might I ask you to add 8.0 to the OP name, as one might be mistaken and think this ROM has been ported to M2 10.0 A01-L instead of the smaller M2 8.0 variant.
Sent from my htc_pmeuhl using XDA Labs
Click to expand...
Click to collapse
Ask and you shall receive

Tried it on my Mediapad M2 801w but it gets stuck on the Huawei boot screen. I left it for about 30 minutes because I know it takes longer on first boot. I might try again without installing gapps.
Thanks for your contribution and hard work to produce a custom rom for this tablet.

dinkmack said:
Tried it on my Mediapad M2 801w but it gets stuck on the Huawei boot screen. I left it for about 30 minutes because I know it takes longer on first boot. I might try again without installing gapps.
Thanks for your contribution and hard work to produce a custom rom for this tablet.
Click to expand...
Click to collapse
Thank you for assisting. I have a feeling this project is really going to be a community effort and not just on my shoulders.
Note: I was suggested to try bring the libril files from the stock rom over to this one. This should make a big difference. Ill try it myself when I get some more time.

Related

[ROM][7.1.2][K920][kingdom]Paranoid Android for Lenovo Vibe Z2 Pro

Unofficial build of Paranoid Android for Lenovo Vibe Z2 Pro (K920)
DOWNLOAD
Google+ community
kernel source: https://github.com/frantisheq/android_kernel_lenovo_msm8974/tree/nougat-mr2
XDA:DevDB Information
AOSPA for Lenovo Vibe Z2 Pro, ROM for the Lenovo Vibe Z2 Pro
Contributors
frantisheq, Electry
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.4.x
Based On: AOSPA
Version Information
Status: No Longer Updated
Created 2017-08-29
Last Updated 2017-11-08
All day with 0829. No problems so far.
uploaded new build with smooth 4K video recording thanks to electry and a little bit adjusted display colors
download latest build again to fix voip audio
Wow thanks!
Ultra fast rom!!!
Super convenient launcher-Very very nice!!!
frantisheq said:
download latest build again to fix voip audio
Click to expand...
Click to collapse
I put the firmware through the recovery mode, but the logo is rebooted. To deliver it was not possible.
wipe system, data, cache and try again.
EDIT: can somebody please test hangouts audio call if there is any sound? thanks
frantisheq said:
wipe system, data, cache and try again.
EDIT: can somebody please test hangouts audio call if there is any sound? thanks
Click to expand...
Click to collapse
I erased the data, cache, dalwick cache, system and even device memory. I also changed from ex4 to f2fs and vice versa. In the end, it still reboots on the logo and does not load the system. I also reinstalled again through 288 and put the last recovery mode - without results.
anyone else with same problem? besides, don't use f2fs with this rom
At me nothing flies-all perfectly works, I will use ...
Can I use addonsu-14.1 from LineageOS?
frantisheq said:
wipe system, data, cache and try again.
EDIT: can somebody please test hangouts audio call if there is any sound? thanks
Click to expand...
Click to collapse
I installed the firmware, solving the problem, 2.8.6.1 used recovery mode.
[email protected] said:
At me nothing flies-all perfectly works, I will use ...
Can I use addonsu-14.1 from LineageOS?
Click to expand...
Click to collapse
use magisk
Sometimes wifi won't reconnect - need to turn off then on. And some problems with GPS fix (ROW phone)
did you upgrade to latest stock rom before using PA? i can get gps lock even in my house and i have no wifi problems
frantisheq said:
wipe system, data, cache and try again.
Pro #frantisheq please port this rom for K920 : http://www.fiui.org/ , this is nice OS
Can port of Zuk Z1 ( same Vibe Z2 Pro ) for K920 )
Click to expand...
Click to collapse
i was trying to port miui some time ago, didn't work. are there any sources for fiui? isn't it based on 4.4?
frantisheq said:
i was trying to port miui some time ago, didn't work. are there any sources for fiui? isn't it based on 4.4?
Click to expand...
Click to collapse
It's on android 5.1.1 and android 6.0.1. open sources by CM )
Download it here : http://www.fiui.org/download.html , with 2 version : android 6.0.1, android 5.1.1 ( rom of Zuk Z1 )
In the paranoid, Wi-Fi 5GHz still does not work. You can check?
frantisheq thanks for the advice-magisk is an excellent utility-works!
The quality of the conversational speaker and camera (especially in the evening) is the best of all custom firmwares I've tried ...amazing rom!!!

[ROM] [UNOFFICIAL] RESURRECTION Remix OPPO Find7 5.8.5 Final [N 7.1.2]

INTRODUCTION
First of all, I love RR rom very much. However, no developer is willing to continue to develop this rom since nougat was out at the early of 2017.
So, i was like "Hey why not build it myself" ...
Then i google myself and yep finally here comes the first rom that I builded successfully!
Thanks to Google and of course the team of RR
Im just have little knowledge in building rom
Im just follow step in the github page of RR...
So any problem mentioned by you guys, i may not be able to answer....
Hope anyone have those knowledge can help!
We learn together!
-IMPORTANT-
- This rom does not support LVM ( Chinese layout maybe support )
- This rom is ROOTLESS!!! flash the zip below to have root
- This is the final build of RR rom for Nougat
So don't ask for update for Nougat anymore
Let Us Wait For Oreo!!!:victory:
-INSTALLATION INSTRUCTIONS-
- Download the latest build
- Download Gapps
- Take a nandroid backup
- Recommended - Full wipe and factory reset
- Flash ROM using latest TWRP 3.x Recovery
- Flash Gapps
- Reboot.
- Enjoy!
-DOWNLOAD LINK-
-ROM-
https://drive.google.com/open?id=1JHoPmS0K1S-H5Fq1xUHhESoKB0eBdqoZ
-GAPPS-
http://opengapps.org/
-EXTRA-
Root : https://ftp.acc.umu.se/mirror/lineageos/su/addonsu-14.1-arm-signed.zip
Source Code: https://github.com/ResurrectionRemix
Source Code: https://github.com/lineageos
ROM OS Version: 7.1.2 Nougat
ROM Kernel: Linux 3.4.x
Based On: Lineage OS
Version Information
Status: Final Unofficial
Current Version: 5.8.5_r29
Created 2017-11-04
Hi, can this be flash on FIND 7A? Thanks a bunch
imna357 said:
Hi, can this be flash on FIND 7A? Thanks a bunch
Click to expand...
Click to collapse
i dun have find7a.... u may try it and give us the feedback
David_Ozc said:
i dun have find7a.... u may try it and give us the feedback
Click to expand...
Click to collapse
will do. thanks
find7a也可以刷,就是dpi有点大
小池迟 said:
find7a也可以刷,就是dpi有点大
Click to expand...
Click to collapse
感恩!
[QUOTE=小
i get stuck in fastboot, cannot go into recovery mode and also boot up the phone, any solution for this?
NgCheeHang said:
i get stuck in fastboot, cannot go into recovery mode and also boot up the phone, any solution for this?
Click to expand...
Click to collapse
Quite likely need to run fastboot oem unlock from computer to phone in fastboot mode. Do a quick search for directions on forums.
Gborg3 said:
Quite likely need to run fastboot oem unlock from computer to phone in fastboot mode. Do a quick search for directions on forums.
Click to expand...
Click to collapse
I messaged him a tool for this that's most likely easier for him
How to fix
I flash ROM and gapps and then in screen show "encryption unsuccessful "
Faiez-[NivoBeatz said:
;74776217]I flash ROM and gapps and then in screen show "encryption unsuccessful "
Click to expand...
Click to collapse
You have the wrong partition layout, you have lvm
Jan.Pul said:
You have the wrong partition layout, you have lvm
Click to expand...
Click to collapse
How to fix that? I use oppo find 7.
Meh
Faiez-[NivoBeatz] said:
How to fix that? I use oppo find 7.
Click to expand...
Click to collapse
Here's what I do when i get that encryption unsuccessful.
I do it in a harder way but idk xP
First I flash again to stock recovery and ColorOS 2.1.5i,from the stock recovery I change the storage partition and reflash the custom Rom again and everything seem to work fine.
akmlfhm said:
Here's what I do when i get that encryption unsuccessful.
I do it in a harder way but idk xP
First I flash again to stock recovery and ColorOS 2.1.5i,from the stock recovery I change the storage partition and reflash the custom Rom again and everything seem to work fine.
Click to expand...
Click to collapse
But you need lvm because you need the space, so install an lvm aware rom like omnirom. Unfortunately lineageos is incompatible with lvm and you get that encryption unsuccessful...
First build for RR Oreo 8.1.0 is officially released for some device.
Any news for Find7?
rdis said:
First build for RR Oreo 8.1.0 is officially released for some device.
Any news for Find7?
Click to expand...
Click to collapse
for now it is not stable will try to update when it is stable enough
Anyone here still using Oppo Find 7?
planning to build an OREO build FINAL version
my Oppo Find 7 dropped and screen broken last month so i need someone to test it after build
If no one still using this phone then i will leave this community forever. Do anything to show your presence here XD
David_Ozc said:
Anyone here still using Oppo Find 7?
planning to build an OREO build FINAL version
my Oppo Find 7 dropped and screen broken last month so i need someone to test it after build
If no one still using this phone then i will leave this community forever. Do anything to show your presence here XD
Click to expand...
Click to collapse
My find 7 still going strong. At the moment using AOKP OREO. I have unified storage Wuxianlin style, so I'm using modded TWRP.
David_Ozc said:
Anyone here still using Oppo Find 7?
planning to build an OREO build FINAL version
my Oppo Find 7 dropped and screen broken last month so i need someone to test it after build
If no one still using this phone then i will leave this community forever. Do anything to show your presence here XD
Click to expand...
Click to collapse
Find7s with crdroid oreo here. Unified storage, modded twrp.
Sent from my Find7 using XDA Labs

[LEAKED][OREO] MIUI 8.4.19 Global Dev leaked [Vince]

FROM THE MODERATOR ~~~ oka1
There have been some people that have claimed this ROM has the possibility of causing burn-in on the LCD due to the brightness adjustment feature not working correctly. As always, please take caution when flashing anything that is custom. YOU ... are the keeper and controller of your phone, you flash at your own risk.
Thx -peace
MIUI Global Dev OREO 8.4.19 LEAKED!​
Flash via TWRP: https://drive.google.com/file/d/1V3g_Z6Dp0hm4-cm6ujKkENog0ZbC9J6V/view?usp=drive_web
Flash with Updater app (needs dev account): http://bigota.d.miui.com/8.4.19/miui_HM5PlusGlobal_8.4.19_14f75923f7_8.1.zip
Lazy flasher: https://androidfilehost.com/?fid=457095661767111293
Modem: https://drive.google.com/open?id=1Q7txC8D7y-xtPW_Ho1la77nJfb2aY8bz
Do not flash UPDATER VERSION via TWRP, this may lead to bootloop!
Instructions for TWRP:
Code:
1. Boot to TWRP/RWRP
2. Wipe System, cache, delvik, data
3. Flash ROM
4. Flash lazy flasher
5. Reboot to system
6. Enjoy!!!
What's working:
Code:
Everything
Bugs:
Code:
Tell Xiaomi
If you have any network issue and
for SIM card error flash modem file in fastboot:
fastboot flash modem non-hlos.bin
If you have any problem like coundnt verify device or something like that while signing In click forget password.
Thank you!
XDA:DevDB Information
MIUI OREO LEAKED, ROM for the Xiaomi Redmi Note 5 / 5 Plus
Contributors
shanuflash (for leaking it), mdeejay (For making it boot)
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.x
ROM Firmware Required: Unlocked bootloader or Global Dev
Based On: MIUI
Version Information
Status: Beta
Current Beta Version: 8.4.19
Beta Release Date: 2018-04-20
Created 2018-04-20
Last Updated 2018-04-20
For more info join: https://t.me/redmi5plusofficial
Great news...thank you
Finally works hahah! I try later
Thank u vmuch!
Regards
for SIM card error I flashed this file in fastboot:
https://drive.google.com/file/d/1Q7txC8D7y-xtPW_Ho1la77nJfb2aY8bz/view
fastboot flash modem non-hlos.bin
Dear DEV.
This telegram group by @redmi5plusofficial ID dosn't exist I tested via telegram & telegram x.
Incompatible dual card,Dual card often without service
nope
Errors with dual sim card.
it always ask for decryption code on recovery even i have flashed lazyflasher
and after wipe internal and rebooting again, it always decryption itself on boot process
how to fix it?
Thanks for leaking it
lklanser said:
Incompatible dual card,Dual card often without service
Click to expand...
Click to collapse
Try flashing modem using adb and fastboot
Incorrect or non-existent file (modem)
Tapatalkkal küldve az én Redmi 5 Plus eszközömről
xxxreyxxx said:
it always ask for decryption code on recovery even i have flashed lazyflasher
and after wipe internal and rebooting again, it always decryption itself on boot process
how to fix it?
Click to expand...
Click to collapse
Try flash rom Dev and flash twrp and follow steps and u go to twrp
Regards
Oreo burns the screen, I recommend DON'T FLASH IT until further notice!
Reporting : Brightness est messed up ! Anything over 10% is in fact full brightness.
shanuflash said:
MIUI Global Dev OREO 8.4.19 LEAKED!​
Flash via TWRP: https://drive.google.com/file/d/1V3g_Z6Dp0hm4-cm6ujKkENog0ZbC9J6V/view?usp=drive_web
Flash with Updater app (needs dev account): http://bigota.d.miui.com/8.4.19/miui_HM5PlusGlobal_8.4.19_14f75923f7_8.1.zip
Lazy flasher: https://androidfilehost.com/?fid=457095661767111293
Modem: https://drive.google.com/open?id=1Q7txC8D7y-xtPW_Ho1la77nJfb2aY8bz
Do not flash UPDATER VERSION via TWRP, this may lead to bootloop!
Instructions for TWRP:
Code:
1. Boot to TWRP/RWRP
2. Wipe System, cache, delvik, data
3. Flash ROM
4. Flash lazy flasher
5. Reboot to system
6. Enjoy!!!
What's working:
Code:
Everything
Bugs:
Code:
Tell Xiaomi
If you have any network issue and
for SIM card error flash modem file in fastboot:
fastboot flash modem non-hlos.bin
If you have any problem like coundnt verify device or something like that while signing In click forget password.
Thank you!
XDA:DevDB Information
MIUI OREO LEAKED, ROM for the Xiaomi Redmi Note 5 / 5 Plus
Contributors
shanuflash (for leaking it), mdeejay (For making it boot)
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.x
ROM Firmware Required: Unlocked bootloader or Global Dev
Based On: MIUI
Version Information
Status: Beta
Current Beta Version: 8.4.19
Beta Release Date: 2018-04-20
Created 2018-04-20
Last Updated 2018-04-20
For more info join: https://t.me/redmi5plusofficial
Click to expand...
Click to collapse
Please Check
Official Supported project Tarble ?
I download from miui and flash via TWRP.
Now my device can not boot, just black screen
Miflash_Tool can not flash.
How I do now, pls teach me?
Maybe its a troll?
Enviado desde mi Redmi 5 Plus mediante Tapatalk
hussein1 said:
Please Check
Official Supported project Tarble ?
Click to expand...
Click to collapse
Treble Check app says: Your manufacturer has chosen not to include treble support. PS Don't quote all OP.
shinigami_tsin said:
I download from miui and flash via TWRP.
Now my device can not boot, just black screen
Miflash_Tool can not flash.
How I do now, pls teach me?
Click to expand...
Click to collapse
You flashed lazy flasher?
proyectos3d said:
Maybe its a troll?
Enviado desde mi Redmi 5 Plus mediante Tapatalk
Click to expand...
Click to collapse
ROM boot correct and all working, autobrightness is messed up but other things work done..
do we have face unlock in this beta ?

[RECOVERY][warsaw][3.4.0-0]TWRP for Huawei P10 Lite

TWRP for Huawei P10 Lite
Working
Code:
[CENTER]* Touchscreen
* Adb
* Backup
* Wipe
* File manager
* MTP
[/CENTER]
Not Working
Code:
[CENTER]You tell me
[/CENTER]
Installation
Code:
[CENTER]* put you phone in fastboot mode and type
"fastboot flash recovery_ramdisk <grab_here_the_img>"
* reboot
[/CENTER]
Download
Code:
[CENTER][URL="https://sourceforge.net/projects/darkjoker360-developements/files/Huawei/P10%20Lite/Pie/TWRP/"]TWRP[/URL]
[/CENTER]
Credits:
@Pretoriano80
@haky 86
@OldDroid
@DarkDroidDev
Please support my work, it's very important! Thanks
DONATIONS
Regards !​
Reserved
sorry for this request here, but please say me, will your stuff like this recovery and roms for p10 lite work on p8 lite 2017 because when im not wrong ive read some stuff work on different huawei phones with same chipsets etc, is it true?Big thanx, keep up your great work, have a nice day. Greeetz!!!
Great .. after testing on WAS-LX1A
i dunno why you're telling that mtp/backups doesn't work !
For me Backups work and internal storage / SD shown on windows normally
*Edit
Can't copy files
Thanks for your precious work .
-CALIBAN666- said:
sorry for this request here, but please say me, will your stuff like this recovery and roms for p10 lite work on p8 lite 2017 because when im not wrong ive read some stuff work on different huawei phones with same chipsets etc, is it true?Big thanx, keep up your great work, have a nice day. Greeetz!!!
Click to expand...
Click to collapse
I've installed RR and Bootleggers ROM's on P8 Lite 2017 and it works. All ROM's and Recoveries for hi6250 based devices (Kirin 655, 658, 659) will work on each other.
Hi, when trying to install your Android AOSP 9 pie ROM with this TWRP recovery... I get message
E3004: This package is for "hi6250" devices; this is a "warsaw"
please help?
GizmoTheGreen said:
Hi, when trying to install your Android AOSP 9 pie ROM with this TWRP recovery... I get message
E3004: This package is for "hi6250" devices; this is a "warsaw"
please help?
Click to expand...
Click to collapse
It could work if you edit the updater-script. In your rom zip open the updater-script file with text editor (Rom.zip/META-INF/com/google/android) and delete the first lines which are for the device verification including the ones giving the error output. This leads to no device check while flashing. :fingers-crossed: . For me it was really helpful in some cases.
NeoPreacher said:
It could work if you edit the updater-script. In your rom zip open the updater-script file with text editor (Rom.zip/META-INF/com/google/android) and delete the first lines which are for the device verification including the ones giving the error output. This leads to no device check while flashing. :fingers-crossed: . For me it was really helpful in some cases.
Click to expand...
Click to collapse
You would think when the same guy dev both Recovery and ROMS they would have that fixed? ^^;;
GizmoTheGreen said:
You would think when the same guy dev both Recovery and ROMS they would have that fixed? ^^;;
Click to expand...
Click to collapse
yeah, this is going to happen soon !
@DarkJoker360
How could I know if my device is hi6250 or warsaw?
chiduja said:
@DarkJoker360
How could I know if my device is hi6250 or warsaw?
Click to expand...
Click to collapse
hi6250 is the device chipset marking which matches multiple devices, warsaw is especially this device as in my case WAS-LX1A (WAS is warsaw). every warsaw is a hi6250 but not every hi6250 is a warsaw.
NeoPreacher said:
hi6250 is the device chipset marking which matches multiple devices, warsaw is especially this device as in my case WAS-LX1A (WAS is warsaw). every warsaw is a hi6250 but not every hi6250 is a warsaw.
Click to expand...
Click to collapse
Thank you, I asked it because I not capable of flash custom ROMs on my P10 Lite WAS-LX3 the problem is: after the clean installation of AOSP 9.0 mi phone get stuck in: your device is booting now... And then go to eRecovery not to TWRP and don't boot on system. I don't know what I have to do.
chiduja said:
Thank you, I asked it because I not capable of flash custom ROMs on my P10 Lite WAS-LX3 the problem is: after the clean installation of AOSP 9.0 mi phone get stuck in: your device is booting now... And then go to eRecovery not to TWRP and don't boot on system. I don't know what I have to do.
Click to expand...
Click to collapse
i had and still have the same results when trying to flash aosp. did you also decrypt your device before flashing any rom? could also be helpful in some cases.
NeoPreacher said:
i had and still have the same results when trying to flash aosp. did you also decrypt your device before flashing any rom? could also be helpful in some cases.
Click to expand...
Click to collapse
The first time that I tried to do the flashing I had to put my patron, but I've never did the decrypt, It's ****ty I tried a lot of "Solutions" but It doesn't worked.
ok alright the problembis that i tried to use "warsaw" codename instead of "hi6250" but it is not working for some reason, it is a flashing issue, and probably i have to revert my changes...
EDIT: before reverting my changes I wanted to try with LineageOS 16.0
Hi
Is there a prerequisite to use this recovery, I'm still using twrp 3.1.1-2 made by KingofMezi so still emui 5.0 but that recovery doesn't allow data backup because of the encryption. So I tried to flash yours it was ok in the command window but when I try to boot in recovery I get an error. I tried flashing again, downloading again and flashing but still doesn't work any idea?
I didn't want to upgrade the rom without a proper backup but none of the recoveries have been working.
Hi! Does someone try to install on a p20 lite?
@DarkJoker360 thanks for your work! Looks amazing.
I've never flashed TWRP before so I am bit nervous of bricking my phone!
I finally managed to unlock my bootloader by downgrading to EMUI 5.1.1, Android 7.0 (...). Will your TWRP work from this version? Is there any benefit/drawback of updating my phone to EMUI 8.0.0/Android 8.0.0 before flashing your TWRP?
P10Lite:
Model: WAS-LX1A
Build: WAS-LX1AC432B209
EMIU: 5.1.1
Android: 7.0
diy_solomun said:
@DarkJoker360 thanks for your work! Looks amazing.
I've never flashed TWRP before so I am bit nervous of bricking my phone!
I finally managed to unlock my bootloader by downgrading to EMUI 5.1.1, Android 7.0 (...). Will your TWRP work from this version? Is there any benefit/drawback of updating my phone to EMUI 8.0.0/Android 8.0.0 before flashing your TWRP?
P10Lite:
Model: WAS-LX1A
Build: WAS-LX1AC432B209
EMIU: 5.1.1
Android: 7.0
Click to expand...
Click to collapse
I asked myself the same question and tried to flash twrp on android 7.0 but it didn't work. I tried to upgrade to android 8 via erecovery but it failed. So i managed to upgrade it to B366 Emui 8 with dload (https://forum.xda-developers.com/p10-lite/development/service-rom-b362-c432-upgrade-o-o-n-o-t3813946) but i still could not flash twrp. So i entered erecovery mode again (press power, volume up & down for a few seconds) and with android 8 i could recover it to the official 8.0.0.376. After this step the flashing of twrp was finally successful. Thanks to darkjoker!!
New TWRP update is up !
Changelog
Code:
[CENTER]* Synced with latest TWRP source code
* FIxed flashing errors[/CENTER]
DONATIONS
Check OP for more info and download !​

[ROM] Custom Recovery Flashable Stock Firmware for Realme X [RMX1901]

This is a custom recovery flashable pure stock firmware. It is based on the A.07 ozip which was released as RMX1901EX_11_OTA_0070_all_6m8Kht2yFPh5.ozip on official realme website. Until kernel source is completed, i'll keep working on it.
Prerequisites
Unlocked bootloader
Custom recovery installed (TWRP/PBRP/Orange Fox)
Recommended:
TWRP Here
PBRP : Here
Instructions
Dirty Flash:
1. Download
2. Reboot to recovery
3. Select install & choose the zip
4. Swipe to flash
5. Reboot
Clean Flash:
1. Download
2. Reboot to recovery
3. Wipe all (cache, dalvik-cache, system, data, internal storage)
4. Select install & choose the zip
5. Swipe to flash
6. Format data
7. Reboot
Recommended: Clean Flash
Features
For now, it's pure stock. Nothing fancy here.
Just a life saver for whom who messed with system/vendor and have no backup.
Bugs
Clean Flash:
1. Nothing, you tell me.
2. Didn't tested OTG, i don't have one.
Dirty Flash:
1. Maybe it is going to inherit the bugs you have currently, again maybe it could fix them (i.e i dirty flashed when the google/fb/twitter sign in are crashing with blank screen and it fixed that)
2. MTP didn't let linux to access the files though it was showing all.
3. You report me yours.
Stock Firmware Info
Build Number: RMX1901EX_11_A.07
Security Patch: August 5, 2019
To Do
1. remove bloatwares.
2. make it a very minimal zip.
3. another variant with pre root.
4. any other good things if i forgot to mention.
Note: I don't have broadband bandwidth to frequently update this. I'll update once it's debloated or on some major changes.
Screenshots
I forgot to take screenshots because i was recording. Again it's 2 GB of recording and compressing to upload to youtube tomorrow. Though i have some pictures from other device. You can find those in screenshots section.
Downloads
Google Drive
Support Development
If you are capable, you should support development. I have the device in hand, have a good pc only thing missing is the bandwidth. I use mobile internet & have to do recharge for every upload or download. If you are willing to support, below is my address.
Google Pay (UPI): [email protected]
See you in future update.
XDA:DevDB Information
Recovery Flashable Stock ROM For Realme X, ROM for the Realme X
Contributors
chankruze
Source Code: https://www.realme.com/in/support/software-update
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: Unlocked Bootloader, Custom Recovery
Based On: RMX1901EX_11_A.07
Version Information
Status: Stable
Current Stable Version: 0.0.2
Stable Release Date: 2019-09-29
Created 2019-09-28
Last Updated 2019-09-29
Can China variant flash this? Thx
is everything working fine? volte, camera, fingerprint?
At last have been asking Ajit for long time xD
nickyip123 said:
Can China variant flash this? Thx
Click to expand...
Click to collapse
Which firmware you use ?
If you use official firmware from here, then it should work.
vikasjangid said:
is everything working fine? volte, camera, fingerprint?
Click to expand...
Click to collapse
Yes, Camere (both front and back), fingerprint and VoLTE.
Please share the YouTube video link if you have uploaded
is it color os or pure android like android one?
can i flash into my china realme x, i am running RMX1901CN_A17 version.
Its Just the same old color OS.
vikasjangid said:
Please share the YouTube video link if you have uploaded
is it color os or pure android like android one?
Click to expand...
Click to collapse
Title is misleading in some sense. Arghhh i just wiped my phone and did all the steps just to find its just the stock color os.
indroider said:
At last have been asking Ajit for long time xD
Click to expand...
Click to collapse
what?
About this flashable a07 zip .. Remember in group.. Raunaq ..?
 @4j17h
I asked u about making this zip few weeks ago
Does jio volte work on Indian variant?
ghostEye said:
Title is misleading in some sense. Arghhh i just wiped my phone and did all the steps just to find its just the stock color os.
Click to expand...
Click to collapse
The title says stock os ,
The features says stock os nothing fancy. You got exactly what is said. Nothing is misleading here.
---------- Post added at 07:41 PM ---------- Previous post was at 07:35 PM ----------
vikasjangid said:
Please share the YouTube video link if you have uploaded
is it color os or pure android like android one?
Click to expand...
Click to collapse
it is color os as described clearly.
indroider said:
About this flashable a07 zip .. Remember in group.. Raunaq ..?
@4j17h
I asked u about making this zip few weeks ago
Click to expand...
Click to collapse
ahha Raunaq yes, I remember you.
Can we flash it on oppo k3 ?
Oppo k3 have the same hardware as realme X just the camera is 16mp ( same sensor as realme 3 pro), so can we flash this rom and change the camera app ?
Hello, on chinese model I receive error 7 (error patching system image), can you help me?
Hey
I am new to this segment
Please explain, if I wipe my internal storage also, from where will I install the custom rom?
Isn't the custom rom should be kept in the internal storage before installing?
phone is stuck in bootloop.
my phone is stuck on realme logo and reboot to recovery what should i do now?i am not able to boot my phone even with other roms like aosp. please help!!
Please make it flashable in Chinese variant too.thanks in advance
How to root this rom? What magisk do you use?
djozgandoz said:
How to root this rom? What magisk do you use?
Click to expand...
Click to collapse
Note:- Rooting stock rom with magisk will only work in core only mode. Hence no modules are going to be loaded.
Both 19.4 & 20.0 working. Flash the zip from recovery mode.

Categories

Resources