I hope someone can help. I purchased a Samsung Galaxy Watch Active 2 from UAE a few months back. Recently I decided to sell it on Ebay but the buyer returned it for some reason and is not responding.. Now the watch is stuck on a screen with the following
ODIN MODE
PRODUCT NAME: SMR820
CURRENT BINARY: Samsung Official
REACTIVATION LOCK: ON
Secure Download : Enabled
CARRIER_ID
WARRANTY VOID: 0 (0X0000)
AP SWREV: B:0 K:0 S:0
Secure JTAG Disabled!!
I don't have the foggiest as to what this is. When I hard press the power button it goes to recovery options but then just comes back to the above screen.
Please help me.
p.s. couldn't upload picture so wrote down the description.
I can't see the image
Inviato dal mio SM-G970F utilizzando Tapatalk
chris.lu said:
I can't see the image
Inviato dal mio SM-G970F utilizzando Tapatalk
Click to expand...
Click to collapse
Hi Ive edit the post. I couldnt download an image on here so i wrote the description.
aliahmed213 said:
I hope someone can help. I purchased a Samsung Galaxy Watch Active 2 from UAE a few months back. Recently I decided to sell it on Ebay but the buyer returned it for some reason and is not responding.. Now the watch is stuck on a screen with the following
ODIN MODE
PRODUCT NAME: SMR820
CURRENT BINARY: Samsung Official
REACTIVATION LOCK: ON
Secure Download : Enabled
CARRIER_ID
WARRANTY VOID: 0 (0X0000)
AP SWREV: B:0 K:0 S:0
Secure JTAG Disabled!!
I don't have the foggiest as to what this is. When I hard press the power button it goes to recovery options but then just comes back to the above screen.
Please help me.
p.s. couldn't upload picture so wrote down the description.
Click to expand...
Click to collapse
I have the same issue. have you got it resolved?
I have the same issue. have you got it resolved?
Related
I was wondering if I possibly have a custom bootloader and can downgrade to carrier unlock?
Odin mode reads as follows
Product Name: SGH-I747
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
Qualcomm Secureboot: Enable
Warranty Bit: 1
Bootloader RP SWREV: 3
OP? Anyone?
Thanks! !!!!
No and no. There are no custom bootloaders for this device.
Once you've been updated to 4 3 or newer you cannot go back and you can't unlock without a code.
Thanks DocHoliday77. I was on family mobile using a Samsung Galaxy Light while my AT&T sat idle waiting for an unlock. I decided to switch to Straight Talk just to use my S3 and I'd have to say I'm happy again. Straight Talk works surprisingly great in my area. Just happy to be using my S3 again. I thank you again and all the developers here on XDA for you wisdom and your time. Very talented folks here!
Hi there,
My beloved Note 2 all of a sudden got into loop mode and after that it started to just show the green man with Downloading showing under it but I hope it is not bricked as it is still in very good overall conditions.
I've never rooted it or put it in developers mode so I guess that's why I cannot get the recovery mode.
I tried using Kies for recovery but it fails.
I've downloaded Odin but can only find images from carriers and mine was factory unlocked from UK.
I've found the temporary file that Kies downloads and puts in zip format but this must be encrypted or password protected as I cannot un-zip it to see if it is in the same format as images from the links provided here.
I will miss it if I cannot bring it back from the brink of the dustbin.
I guess that I can only use odin with the device in developers mode as it does not seem to respond to odin either.
Any tips on what else I should try short of making it into an expensive paperweight?
Update:
Odin mode says:
Product name: GT-N7100
Current binary: Samsung Official
System status: Official
Knox warranty void: 0
AP SWRev: A2
Best wishes,
Wovens
The n7100 was purchased in an unlocked state or from a carrier and then unlocked?
Once network unlocked, the phone should remain unlocked after flashing a stock rom.
i was running 6.0.1 i was trying to downgrade to 4.4.4 but i messed and put the csc where the ap was supposed to go. so i did it the way i was supposed still a fail. i need a file that will work and root to if its possible. i know sm-n910a is a difficult model. i would have downloaded from sammobile but they dont have any stock firmware for this model. every time ive rooted or changed firmware on my other galaxy devices ive used ap/pda that's what threw me off. after that i tried flashing back to 6.0.1 stock. now im in a boot loop.
odin mode (high speed)
product name:SM-N910A
current binary: Samsung official
system status: official
reactivation lock: off
knox warranty void: 0x0
qualcomm secureboot: enable (csb)
rp swrev: s1 t2 r1 a2 p1
secure download : enable
udc start
江信江疑 said:
i was running 6.0.1 i was trying to downgrade to 4.4.4 but i messed and put the csc where the ap was supposed to go. so i did it the way i was supposed still a fail. i need a file that will work and root to if its possible. i know sm-n910a is a difficult model. i would have downloaded from sammobile but they dont have any stock firmware for this model. every time ive rooted or changed firmware on my other galaxy devices ive used ap/pda that's what threw me off. after that i tried flashing back to 6.0.1 stock. now im in a boot loop.
odin mode (high speed)
product name:SM-N910A
current binary: Samsung official
system status: official
reactivation lock: off
knox warranty void: 0x0
qualcomm secureboot: enable (csb)
rp swrev: s1 t2 r1 a2 p1
secure download : enable
udc start
Click to expand...
Click to collapse
So, what happens if you try putting it back to Download Mode and reflashing the 6.0.1 correctly this time?
Hello
i am melvirus
This is my first comment here, I apologize if this is out of place, come to this forum looking for a solution to a problem presented on my phone.
It turns out that my phone does not allow me to install any roms, it has been proven with several and none let me perform the complete procedure.
I always get the same error, nand write start fail.
On the phone the following appears in the download mode
odin mode
product name: GT-I9192
Current Binary: Custom
System Status: Official
Knox Kernel Lock: 0x0
Knox Warrante void: 0x1
csb-config-lsb: 0x30
In gray letters
bootloader ap swrev: 2
write protection: enable
Someone could help me a little
hello forum friends I come with this little problem which is that when I flash this phone takes the flash well but I stuck the samsung s4 mini i9192 duos and above I get some blue letters that says recovery booting. I can enter in the recovery mode and I realized that when I put it in download mode it comes out at the end with some letters that says write protection: enable and half lei that say that because it is enabled, it does not let the system flash to the cell phone.
because the help I need is how to disable that option or some other medium where I can install the software.
PD: I do not know what version the cell phone had since it was brought to me because it was frozen and flashed with several flash and always gives me that problem taking into account that the flash that I put on are good because they are the ones I use with other phones of this same model. it's the first one that comes up with that option
thanks for your help
ODIN NAME
PRODUCT NAME: GT-I9192
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEM STATUS: OFFICIAL
knox kernel lock: 0x30
knox warranty void: 0x1
CSB-CONFIG-LSB: 0X30
bootloader ap swrev: 1
write protection: enable
someone to help me with this problem I do not know what else to do thanks
Sorry for my language is the google translator