I am just wondering if I am alone with this problem because I can't find anyone with similar problems.
When I put the phone in the cradle when its off, after a minute or so the phone turns on and ActiveSync starts. This is obviously very annoying because it syncs when I don't even want it to. I have never had this problem with my wallaby only my blue angel.
I have gone throught the settings and turned off any automatic sync options but still it does it. Have I missed any options or am I doing something wrong?
Thanks, Ian
Not to be one of those 'oh! I have that problem, too!', but you asked if any others are having this problem, sooooo....
I've got the same problem! I notice that this happened with other USB devices, too. I had an IPAQ that did the same thing. It would power up when connected to the USB, even after a few hours.
What I think is happening is this:
I think that the USB lines are separate from the lines that the charger connects to (someone correct me on this?). There are 2 lines on USB for voltage, the other 2 are signal I think. So, when the device sees a voltage on the USB line (like when you first plug it in), it turns on. Perhaps the USB is changing state for some reason, causing the thing to turn on?
To keep it from sync-ing (I just want it to charge), I kill WCESMgr.exe and wcescomm.exe to stop activestynk. But then something even more annoying starts to happen if the phone is left on... windows constantly connects the USB and then disconnects... over, and over, and over...
What the heck?
At least somebody else is having the same issues
I came to the same kind of conclusion as you I think. As far as I know its a driver/hardware problem on the USB side, where the USB 'wakes' every now and again, in turn powering on the phone.
I am going to update my USB drivers and see if it makes a difference.
You can also open connection settings in activestink and remove the tick in the box marked "Allow USB connection with this computer".
Hey guys!
Last night i installed B30 of AOKP to my phone via CWM and now my phone will not mount to my computer. I cannot install a different rom as i cannot place it on my intSD. Has anyone suffered this problem and/or has a solution?
Thanks for your time,
Steve
Are you using fast USB charge?
Sent from my francoPhone
I'm not no. Or i haven't enabled it. Where would i find it?
Thanks for the quick reply btw.
No it's not
What kind of computer? Windows,its a driver thing, if its Mac u need android file transfer which is a nifty application u can find for free.
Edit: Try a different USB slot btw
Sent from my francoPhone
Settings>storage>menu dots>mtp
Sent from my Galaxy Nexus using Tapatalk
I have the same issue. MTP is selected, but I don't get any signal from windows that a USB device is connected. It's like plugging it in the usb wall charger, all it does is charge it. If it is the fast charge usb, how do you disable it?
---------- Post added at 01:46 AM ---------- Previous post was at 01:28 AM ----------
Ok, the Galaxy S II looks to have the same issue.
http://forum.xda-developers.com/showthread.php?t=1555266
mnirocky said:
Hey guys!
Last night i installed B30 of AOKP to my phone via CWM and now my phone will not mount to my computer. I cannot install a different rom as i cannot place it on my intSD. Has anyone suffered this problem and/or has a solution?
Thanks for your time,
Steve
Click to expand...
Click to collapse
I noticed this problem when I had fast charge enabled on this rom.. I rectified the issue by disabling the fast charge present in AOKP B30..
Navigate to Rom control and click performance tweaks. You should see a checkbox to disable fast charge there.
Restart your phone after disabling it for the changes to take effect..
After disabling and rebooting your phone, the usb should mount to your computer properly..
darll said:
I noticed this problem when I had fast charge enabled on this rom.. I rectified the issue by disabling the fast charge present in AOKP B30..
Navigate to Rom control and click performance tweaks. You should see a checkbox to disable fast charge there.
Restart your phone after disabling it for the changes to take effect..
After disabling and rebooting your phone, the usb should mount to your computer properly..
Click to expand...
Click to collapse
Well the mtp fixed it. Guess I should have looked into that first. My bad, thanks for the help guys! Now if only I did not keep getting "System UI has stopped" at random times on aokp...
I've tried changing it from MTP to PTP and turning after switching between the two. I've tried two different roms, one based on 4.0.4 and 4.0.3. I've Tried several different USB cables, including the ones that came with my G2x and Nexus One. I've tried it in a USB 3.0 Port. I've tried using different kernals. Even when I get into recovery, windows still doesn't read somthing is attached. I've been transfering ROMS to it via dropbox. I don't think it's a rom issue as it should still show up in windows when in recovery. Also on those roms I made sure that they didn't have "USB Fast Charge" enabled, as I heard that can cause the issue I'm experience. Thinking it was an issue with CWM, I downgraded it, but still no USB. I'm stuck here. Any help is greatly appreciated.
Their IS a fix for this, but we need the code to get into the PhoneUtil menu and turn USB back on.
It's an issue with Samsung phones apparently, and here's a fix someone found a while ago.
http://blog.vacs.fr/index.php?post/...ot-detected-problem-on-Android-Samsung-phones
We just need the PhoneUtil code for the Galaxy Nexus and we should be all set.
It's a HARDWARE ISSUE with the latest batch of GNexs.
My issue is definitely hardware. I sent my GNex back and they sent me back a new one which I received yesterday. I checked and this one wasn't previously rooted or Unlocked. It worked for a day (worked as in windows saw it and I could xfer music/books/comics to it) after I get home from work Windows stopped recognizing it. I did NOTHING to the phone, it just stopped being seen by windows. I only used the cable that came with it and charged it the night before using the supplied adapter, but the USB still stopped working. Last resort I did a system restore to the phone and the USB still doesn't show up in anything ,Tried 5 of my Windows PC's A bunch of PC's at work, my friends Mac, my Ubuntu powered Netbook, my Xbox360 and PS3, even the Transformer Prime using the keyboard dock. This is telling me it's a hardware issue with the Device. Might be somthing wrong with the latest batch of GNex's but the USB seems to give out. Even if I put the phone in ODIN mode NOTHING recognizes it. So, before you all waste your time finding a fix, this is 100% absolutly a hardware issue with these phones, I don't know why, but I had Two bad ones in a row, and am Hoping my 3rd isn't borked too.
I have a bad history with Android phones....My first Nexus One wouldn't stay on, so I got a replacement from HTC. My first two G2x's would constantly reboot, It wasn't until the 3rd one that I got a working one. Now I'm hoping I don't have to go through 4 bad Galaxy Nexus' before getting one that actually works!
I have the opposite luck with tablets....the Novo7, Iconia A100 and Transformer Prime have been perfect outa box. This ordeal with android phones makes me seriously consider exchanging the GNex for an iPhone4s....but the iPhone4s screen is SOOOOO tiny!!!
Hi all. Long time lurker, first time poster here.
I have had my Galaxy Nexus for around a year now and have never had any problems - I've flashed countless ROMs and kernels, etc. However, just recently my phone has stopped being recognized by my computer(s). I've searched and searched and read every thread remotely related to the problem and still the problem persists.
At first I thought it was the new Macbook I was using, or OSX, but I've tried everything I can think of in Windows, OSX, and Linux.
When plugged in, I get nothing in OSX - finder won't find it, android file transfer won't find it, adb won't find it. In Windows, I get an unknown device in device manager, and a popup on the toolbar saying the device has malfunctioned. I've tried all three driver installs with Wug's toolkit, switching from MTP to PTP, turning Debugging on and off, flashing new roms and kernels, installing drivers manually, installing drivers through the Android SDK, even different computers - but every time I get "The USB Device has malfunctioned," or nothing at all in OSX's case. I've even tried a laptop running Ubuntu - still a no go. All the while the phone shows it is charging fine, but no indication of being connected to a PC like it used to do.
I've even tried bending the USB port a little as I've read in some guides and cleaning out the port - no luck. I have yet to try a different cable - one is on the way - but my next step is to replace the USB port board myself, unless anyone has ANY ideas.
It charges fine and never has any problems, it's just I cannot get it to be recognized by anything I plug it into.
I don't have an option to enable/disable fast charge in this ROM (currently on CM10) but I have disabled it in one of the ROMs I flashed to and still no luck.
Is there anything I've yet to try, besides using a different cable? Maybe fast charge was enabled in another kernel and it's screwed up some stuff? Although that seems impossible because I've factory reset/wiped everything and flashed different ROMs and kernels and still nothing. I just don't know at this point.
Any input at all would be great, but I understand if there's nothing else I can do besides trying a new cable and then replacing the board. I finally get going in Android development and this brick wall stops me in my tracks.
Thanks guys.
Try to clean the port (by blowing all the dust out of the usb-port)
For now, just use 'Wifi-explorer'. I use it ALOT just to save my USB-port
The two options you came up with yourself sounds most plausible. I've been through a ton of MiniUSB cables that have gone bad out of nowhere (just lying in my briefcase). So test that one first before buying a new USB port.
Well what do you know, it was the USB cable. I cannot fathom how a USB cable just stops working on the data side of things but still charges after just sitting around. I found another cable in a drawer, plugged it in, and voila, everything's working. Glad I don't have to replace anything, though. Woo!
Good thing is though I now know my way around the drivers and the SDK and am pretty sure I could write a guide on everything you could do to fix a USB issue. The more you know!
tuk1maar said:
Try to clean the port (by blowing all the dust out of the usb-port)
For now, just use 'Wifi-explorer'. I use it ALOT just to save my USB-port
Click to expand...
Click to collapse
I had been using AirDroid before and loved it. And even though it was a cable problem, I know know my USB port is squeaky clean, ha.
Hi guys,
My GNex has a problem. Many users seem to have a similar problem but theirs seem to be hardware related and I'm pretty confident mine is software related.
It started a few months ago when my GNex wouldn't charge through the wall charger. I was on a trip with my friends so I didn't have access to a pc and wasn't able to troubleshoot further. The charging icon would appear when the phone was off but when I turned it on it didn't charge. I played around with the phone for about two hours, rebooting, Googling for solutions, changing the USB connection modes in the Storage settings. When I changed from Next Launcher to Stock launcher and rebooted everything was working fine again. However I think it was only a coincidence. Then the problem didn't occur again until now and this is why I think it's software related. If hardware would have been broken the problem wouldn't just have fixed itself like that.
It happened 3 days ago but somehow fixed itself again. I was troubleshooting the issue with my GNex connected to PC and installed Nexus Root Toolkit by Wugfresh. During install my phone rebooted on it's own and suddenly USB worked perfectly again!
However yesterday I forgot to charge and my GNex died. On reboot the issue was back.
"Symptoms":
Phone won't charge with any wall charger (and any cable) unless off
Phone will charge through USB in any mode but PC will not recognize it and install it as unknown device.
USB Debug Icon and Connection Mode notification do not appear in status bar upon PC connection
OTG doesn't work and apps like "Stickmount" do not detect external drives
Attempts:
Gently bending the "tongue" inside the micro usb on the phone in case there is a bad connection
Reinstalling drivers on PC
Rebooting device in different modes including fastboot
Using different batteries
NOTES
This problem started after latest 4.3 update. It has only occured after battery completely runs dry. I have 3 batteries (a bit excessive I know) and an external battery charger so charge is not the issue, I just really want to understand what's going on with my phone.
I'm not ready to Factory Reset or replace the USB port yet, those are last resort options to me. Any other options, especially software related, are very welcome. I am on stock 4.3 only rooted and with CWM recovery.
In Testing menu (type *#*#4636#*#* in Dialer) under Battery Settings my phone also says Charging (AC) when connected through USB. Hope this helps.
Been Googling around for two days now so I decided to make my own thread. Any help is appreciated. Sorry for this very long post.
Fixed it! Tried bending the tongue inside the micro usb again, forced much more this time, everything is working again, for the moment
Ok, first off I chose Sprint because I believe that Boost Mobile is on the sprint network, but my phone doesn't specifically say sprint on it or anything, so I had no clue which of these device boards to post into. This is the exact page I got it on, if that helps. [link deleted - paranoid forum rules] - I will post specs of the device in a minute.
Alright, the issue with my phone, is that after I used a car charger 2 months after I got my phone, it suddenly stopped being able to connect to ANY computer ever again. I suspected it was PDA net at first cause that was the newest change I had done to my phone. So, a few days later, I could find now way whatsoever to fix it, and had to factory reset. This fixed my phone just fine.
Two months later, I was fed up with having battery issues all the time, this phone drains battery faster than my laptop, and its battery is 3.8 years old! I got an external battery that holds 20,000 mAh/74 Wh (Practically the same as my laptop battery too. ) that is from the LimeFuel company. I know that before I used it, my phone worked with my laptop just fine. I don't plug my phone in to my laptop all that often, especially now that I have a battery to use with it. However, I download large files on my phone with 4G to put onto my laptop because my home net is crappy, so a week after, I noticed that my phone lost the ability to communicate with computers, again. I then realized, it had to be the connections. The first time it happened was when I used a car charger, the second time, an external battery. Each time, my phone suddenly inexplicably lost the ability to communicate with a computer ever again. It can only see devices as a power source, nothing more. There's no missing software or drivers, it just doesn't register as anything to my computer. Like a power toggle so it can't tell the computer "Hey, I'm a device that you can transfer data with".
One more note; The first time this happened, I had activated developer options but had them turned off. I mean that I used USB Debugging mode once and turned all of that off. The second time, I hadn't even unhid the option yet, unhid after my phone broke again to try and fix but nope.
I did research on trying to fix it, without factory reset because a factory reset is USELESS, if it's going to happen every single time I use anything but the wall to charge it, right?
There was a topic online claiming that there is a menu under "Storage" in the settings. There isn't. It was a big fat lie. Or Android devs deleted it.
There was another topic, claiming that USB settings would be under some wireless and networks area. Nope.
Now, I remember that when my device would connect to the computer, it would let me change it from MTP to PTP, but after this happened, nothing. It doesn't even pop up anymore, nor does it ask. There is no where in the phone that these options even exist at all. It's like Android devs deleted access to these options for no reason whatsoever.
Another bit in that topic mentioned ‘USB Mass Storage’, which also doesn't exist. Here's the topic with everything I tried, if I'm allowed to give links at all. If not, well not my fault. Topics used to try and diagnose and fix issues, but failed;
[link deleted - paranoid forum rules]
[link deleted - paranoid forum rules]
(There were more but I can't remember them all, it's more or less the same as the two above)
"To prevent spam on the XDA forums, ALL new users prevented from posting outside links in their messages. After approximately 10 posts, you will be able to post outside links. Thank you for understanding!"
Translation: "To prevent spam, we want to hinder only legitimate users by making them post 10 units of spam first before they can get help with their issues by showing exact information and screenshots of their issues or steps taken given by other websites."
So. How do I get my phone to connect to computers again?
Why does it stop accepting data from computers after I use a car charger or an external battery pack?
Why would Google/Android devs choose to intentionally break your phone like this?
Code:
Hardware: L710T.03
Software: L710TVPU0AOA3
Model: SPH-LT10T
Android 4.4.2
Kernal: 3.4.0-1683363 (Ask if need more)
Build: KOT49H.L710TVPU0AOA3
Ask of need more.
VasVadum said:
Ok, first off I chose Sprint because I believe that Boost Mobile is on the sprint network, but my phone doesn't specifically say sprint on it or anything, so I had no clue which of these device boards to post into. This is the exact page I got it on, if that helps. [link deleted - paranoid forum rules] - I will post specs of the device in a minute.
Alright, the issue with my phone, is that after I used a car charger 2 months after I got my phone, it suddenly stopped being able to connect to ANY computer ever again. I suspected it was PDA net at first cause that was the newest change I had done to my phone. So, a few days later, I could find now way whatsoever to fix it, and had to factory reset. This fixed my phone just fine.
Two months later, I was fed up with having battery issues all the time, this phone drains battery faster than my laptop, and its battery is 3.8 years old! I got an external battery that holds 20,000 mAh/74 Wh (Practically the same as my laptop battery too. ) that is from the LimeFuel company. I know that before I used it, my phone worked with my laptop just fine. I don't plug my phone in to my laptop all that often, especially now that I have a battery to use with it. However, I download large files on my phone with 4G to put onto my laptop because my home net is crappy, so a week after, I noticed that my phone lost the ability to communicate with computers, again. I then realized, it had to be the connections. The first time it happened was when I used a car charger, the second time, an external battery. Each time, my phone suddenly inexplicably lost the ability to communicate with a computer ever again. It can only see devices as a power source, nothing more. There's no missing software or drivers, it just doesn't register as anything to my computer. Like a power toggle so it can't tell the computer "Hey, I'm a device that you can transfer data with".
One more note; The first time this happened, I had activated developer options but had them turned off. I mean that I used USB Debugging mode once and turned all of that off. The second time, I hadn't even unhid the option yet, unhid after my phone broke again to try and fix but nope.
I did research on trying to fix it, without factory reset because a factory reset is USELESS, if it's going to happen every single time I use anything but the wall to charge it, right?
There was a topic online claiming that there is a menu under "Storage" in the settings. There isn't. It was a big fat lie. Or Android devs deleted it.
There was another topic, claiming that USB settings would be under some wireless and networks area. Nope.
Now, I remember that when my device would connect to the computer, it would let me change it from MTP to PTP, but after this happened, nothing. It doesn't even pop up anymore, nor does it ask. There is no where in the phone that these options even exist at all. It's like Android devs deleted access to these options for no reason whatsoever.
Another bit in that topic mentioned ‘USB Mass Storage’, which also doesn't exist. Here's the topic with everything I tried, if I'm allowed to give links at all. If not, well not my fault. Topics used to try and diagnose and fix issues, but failed;
[link deleted - paranoid forum rules]
[link deleted - paranoid forum rules]
(There were more but I can't remember them all, it's more or less the same as the two above)
"To prevent spam on the XDA forums, ALL new users prevented from posting outside links in their messages. After approximately 10 posts, you will be able to post outside links. Thank you for understanding!"
Translation: "To prevent spam, we want to hinder only legitimate users by making them post 10 units of spam first before they can get help with their issues by showing exact information and screenshots of their issues or steps taken given by other websites."
So. How do I get my phone to connect to computers again?
Why does it stop accepting data from computers after I use a car charger or an external battery pack?
Why would Google/Android devs choose to intentionally break your phone like this?
Code:
Hardware: L710T.03
Software: L710TVPU0AOA3
Model: SPH-LT10T
Android 4.4.2
Kernal: 3.4.0-1683363 (Ask if need more)
Build: KOT49H.L710TVPU0AOA3
Ask of need more.
Click to expand...
Click to collapse
First off, after the factory reset and everything worked did you reinstall the pdanet?
Second, 20,000mah battery? Holy cow im jealous!
Forgive me if you have already tried these things but this is what i would do...
Did you reenable developer options and reenable adb debugging?
Did you uninstall and reinstall your phone drivers?
Is there an updated phone driver?
Have you tried a different usb cord?
Is there excess dirt or dust in usb charge port on your phone?
Does your usb charge port even work anymore or do you just charge external battery on wall?
Have you tried a different usb port on the computer?
Have you tried on another computer?
Have you tried updating computer drivers?
Have you enabled a fast charge tweak like on a kernel tweak app?
If none of these questions fix it then a workaround is downloading app called airdroid. You can wirelessly transfer files from phone to computer and back again without usb cord.
Let me know what worked please! Good luck!
ZipAddict said:
1. First off, after the factory reset and everything worked did you reinstall the pdanet?
2. Second, 20,000mah battery? Holy cow im jealous!
3. Did you reenable developer options and reenable adb debugging?
4. Did you uninstall and reinstall your phone drivers?
5. Is there an updated phone driver?
6. Have you tried a different usb cord?
7. Is there excess dirt or dust in usb charge port on your phone?
8. Does your usb charge port even work anymore or do you just charge external battery on wall?
9. Have you tried a different usb port on the computer?
10. Have you tried on another computer?
11. Have you tried updating computer drivers?
12. Have you enabled a fast charge tweak like on a kernel tweak app?
13. If none of these questions fix it then a workaround is downloading app called airdroid. You can wirelessly transfer files from phone to computer and back again without usb cord.
Click to expand...
Click to collapse
1. No, I never touched PDA net again.
2. Too bad forum rules say I can't be friendly and give you the link to it.
3. Read the topic you quoted. I did, only after my phone broke again. Except it's not adb debugging, it's USB debugging. Doesn't work, because the phone can't communicate with a computer anymore.
4. 5. 11. Yes I reinstalled drivers and no there were no updates.
6. 7. Nothing's wrong with the cable. I did try with others.
8. What does that even mean? Yes my phone's port works. Nothing's wrong with any hardware.
9. 10. I've tried different ports and different computers.
12. Can't, phone isn't rooted.
13. I'm not using this. My phone is not there for Google/Android to tell me I'm not allowed to use my USB port ever again. I'm also not going to wait 4 hours for a 4 GB file to transfer via my router to my computer nor am I installing some app software to my computer just to have wireless transfer. This is not a work around. This is an "Oh well, it's broken, guess you can't ever use USB ports again for data access!"
note; I tried all of these (except 12/13) before I ever came here looking for help.
2. I will google it
3. I didnt realize toggle to turn on usb debugging didnt work sorry. I just know it needs to be on for the computer to see the phone. This seems to be an area of problem possibly.
8. Lol! What i meant was did the area where u insert charger function properly. Only reason i asked is because some of those batteries charge on wall unit made specifically to charge the battery only not with charge.
12. Doesnt require root for basic settings like changing governor usually. Only to overclock/undervolt, etc.
13. Great answer! But i meant as a temporary fix until someone more experienced with this issue helps you.
I also figured listing all those things would help other people see what you had and hadnt tried before asking you next time. Wish i couldve helped more. Good luck
ZipAddict said:
2. I will google it
3. I didnt realize toggle to turn on usb debugging didnt work sorry. I just know it needs to be on for the computer to see the phone. This seems to be an area of problem possibly.
8. Lol! What i meant was did the area where u insert charger function properly. Only reason i asked is because some of those batteries charge on wall unit made specifically to charge the battery only not with charge.
12. Doesnt require root for basic settings like changing governor usually. Only to overclock/undervolt, etc.
13. Great answer! But i meant as a temporary fix until someone more experienced with this issue helps you.
I also figured listing all those things would help other people see what you had and hadnt tried before asking you next time. Wish i couldve helped more. Good luck
Click to expand...
Click to collapse
2. amazon dot com /External-20000mAh-Limefuel-LP200X-Flashlight/dp/B00OHZVN5U/ - It let me charge my phone 7-8 times fully before it was empty. Automatically stops when your phone is full.
3. USB debugging doesn't need to be on in order for a phone to communicate with a computer. This is only if you want to debug apps or use other developer tools. File transfer works just fine without it.
8. I still don't understand what you mean. My phone is not broken in any way. Nor is my battery. My external battery charges off any USB input, my phone charges off any USB input. My phone just can't communicate data wise between devices anymore via USB.
12. Fast charge isn't going to fix my phone. Unless it disables data communication, then I need to turn it off. All "kernal tweak apps" appear to require root. The top 5 google searches shown this.
3. Wasnt sure. Ive always had it on
8. Some aftermarket batteries dont charge while in phone hooked up to charger. They come out of phone and into specialized charger for battery only not phone with it, so that it can charge the larger battery in a matter ofan hour or so is what i have been trying to say. But its obvious thats not the case for you now since i asked and clarified. If this was the case one might not know that the small usb port on their phone needed cleaning to make a good connection because they literally dont use it to charge their phone. They charge their phone with external battery charger. You see?
12. On my custom rom and on my trickstermod app it does say fast charge disables data communication and that you have to turn it off for computer to recognize phone again. This fast charge mode only works when connected to computer not wall charger it says
Wish i could be more help but im out of ideas. Good luck
Update to the current situation.
My phone is somehow, repaired. But I have no clue why. I did several things today, just screwing around while I backed up my stuff to the SD card. One of them could have fixed it, or my phone is magic and self repairs after a while. Lets list everything I can remember that I did.
1. I typed in *#9900# in my dialing app. Toggled an option called "Low battery dump" to "on".
2. I deleted a whole bunch of files, including hidden files on the internal storage. Probably screwed up my apps but, whatever, it works now.
3. I pulled the SD card out.
Shortly after all these things, I plugged it in for power, and it finally, got my computer to see it as an MTP device again. No clue which of these succeeded. I'm going to wait a small bit before I test the things that tend to break it.
The magic option, is because I tried to root, it broke, stuck in download mode with some error about firmware. For 4 hours it was stuck like this, I tried everything I could think of, which wasn't much, tried installing the ROM back too, after wasting 2 gigs of bandwidth downloading it only to get an error before it even started the install. Phone was still rebooting in download mode error screen. Left it sit there off for like a minute and it just turns it's self back on, flickers a few times and the logo pops up and the device pops on like nothing had ever happened to it. I'm so confused. :/ At least everything's back to normal. Now add a good confusion post icon below so I can click it and post. :|
VasVadum said:
12. Fast charge isn't going to fix my phone. Unless it disables data communication, then I need to turn it off.
Click to expand...
Click to collapse
this was your problem remember? fast charge does disable data communication.
VasVadum said:
Update to the current situation.
My phone is somehow, repaired. But I have no clue why. I did several things today, just screwing around while I backed up my stuff to the SD card. One of them could have fixed it, or my phone is magic and self repairs after a while. Lets list everything I can remember that I did.
1. I typed in *#9900# in my dialing app. Toggled an option called "Low battery dump" to "on".
2. I deleted a whole bunch of files, including hidden files on the internal storage. Probably screwed up my apps but, whatever, it works now.
3. I pulled the SD card out.
Shortly after all these things, I plugged it in for power, and it finally, got my computer to see it as an MTP device again. No clue which of these succeeded. I'm going to wait a small bit before I test the things that tend to break it.
The magic option, is because I tried to root, it broke, stuck in download mode with some error about firmware. For 4 hours it was stuck like this, I tried everything I could think of, which wasn't much, tried installing the ROM back too, after wasting 2 gigs of bandwidth downloading it only to get an error before it even started the install. Phone was still rebooting in download mode error screen. Left it sit there off for like a minute and it just turns it's self back on, flickers a few times and the logo pops up and the device pops on like nothing had ever happened to it. I'm so confused. :/ At least everything's back to normal. Now add a good confusion post icon below so I can click it and post. :|
Click to expand...
Click to collapse
glad whatever you did fixed it lol. have a good day
ZipAddict said:
this was your problem remember? fast charge does disable data communication.
glad whatever you did fixed it lol. have a good day
Click to expand...
Click to collapse
Except, I don't have a fast charge option anywhere. I can't toggle fast charge. My phone is unrooted and locked and such. If plugging in a device like a battery or a car charger, toggles this option and the OS developers deleted access to toggle this option, it is an OS bug and a critical issue in the device that needs to be fixed. I don't know what fixed it, but I'm assuming it was the low battery dump, and that doesn't appear to have anything to do with fast charge and it was a hidden secret option in the system.
VasVadum said:
Except, I don't have a fast charge option anywhere. I can't toggle fast charge. My phone is unrooted and locked and such. If plugging in a device like a battery or a car charger, toggles this option and the OS developers deleted access to toggle this option, it is an OS bug and a critical issue in the device that needs to be fixed. I don't know what fixed it, but I'm assuming it was the low battery dump, and that doesn't appear to have anything to do with fast charge and it was a hidden secret option in the system.
Click to expand...
Click to collapse
The way u said it i misunderstood i thought u did have it on. Its not an option on all roms though. Mine has it and i tried it and couldnt see files thru usb until i toggled it off so it was just an idea. I dont know the effects of the low battery dump off top of my head but i will remember that if i hear someone else with same problem. Glad its fixed now