I purchased a used Fire TV 2nd gen online but when I boot it up, it goes into some kind of kiosk slideshow for 1st gen Amazon Echo devices that I can't exit.
It boots normally at first with the Fire TV logo an all but there's no config screen or anything. It boots to a white AMAZON ECHO screen with pics of the original Echo device then goes into a slide show showing all the various features of Amazon echo. The remote doesn't sync and the device will only show up on the Fire TV remote app for a few seconds before disappearing after boot. I can plug in a physical keyboard and if I press the ESC key, the screen will go black for a second before re-starting the slide show from the beginning. So far I've not been able to find any other keyboard functions that react, only the ESC key so far.
If I had to guess, I'd say it probably has a much older version of the OS on it as the slide show is for the older generations of Echo.
I'm assuming this used to be some kind of demo device, maybe from Best Buy or something but does anyone know how to get out of this slide show so it can be used as a normal device or is this thing just useless? Suggestions?
Hannover2k said:
I purchased a used Fire TV 2nd gen form ebay but when I boot it up, it goes into some kind of kiosk slideshow for Amazon Echo that I can't exit.
It boots normally at first with the Fire TV logo an all but there's no config screen or anything. It boots to a white AMAZON ECHO screen with pics of the original Echo device then goes into a slide show showing all the various features of Amazon echo. The remote doesn't sync and the device will only show up on the Fire TV remote app for a few seconds before disappearing after boot. I can plug in a physical keyboard and if I press the ESC key, the screen will go black for a second before re-starting the slide show from the beginning. So far I've not been able to find any other keyboard functions that react, only the ESC key so far.
If I had to guess, I'd say it probably has a much older version of the OS on it as the slide show is for the older generations of Echo.
I'm assuming this used to be some kind of demo device, maybe from Best Buy or something but does anyone know how to get out of this slide show so it can be used as a normal device or is this thing just useless? Suggestions?
Click to expand...
Click to collapse
Just as an update, I found that if I plug in a USB keyboard, pressing ALT+ESC will pop up a menu telling me to press the home button if I wish to return to the home screen. No remote works with it yet so that doesn't help much. Pressing ALT+Space will bring up what appears to be the FireTV search keyboard but typing doesn't bring up anything, it just echos what I type and there's no 'ENTER' key to submit anything.
If I do this immediately after the slideshow comes up, it will prompt that there's no network connection and take me to the network settings menu. I tried plugging in a LAN cable but the device doesn't seem to pull up an IP address. I manually entered an IP but was unable to find it on the network. Even tried using the APPS2FIRE app to see if it could see it in the search but it doesn't. I connected it to wifi successfully but same issue, it doesn't seem to actually pull an IP address as I can't see it on my network when I scan for it. The network settings know when the LAN is plugged in and removed though.
Plugging in USB A-A doesn't seem to do anything. I tried running the Unbrick batch file from one of the other posts but it's intended to work on non-rooted devices with the jumper trick, I think, and while it does kick off the script, it stops at 0% and never does anything. I'm sure this is an older OS that can still be rooted but I just don't know how to get to anything in it since I can't get into ADB.
Any suggestions would be appreciated though!
Hannover2k said:
I'm sure this is an older OS that can still be rooted but I just don't know how to get to anything in it since I can't get into ADB.
Any suggestions would be appreciated though!
Click to expand...
Click to collapse
If you can't get device to show up on adb devices via terminal/command prompt or access settings menu I don't think there's much you can do.
1.Try doing a scan with Fing Network Tools and see if IP shows.
2. Try downloading and installing FireTV remote App on your phone and connecting if it finds stick.
Without adb being activated on the stick, and settings menu unavailable to enable adb there is not much else for it m8, these ebay sticks are dodgy to say the least I've been stung a few times. Even bought one and opened it to find the heat shield casing missing and clk broke lol
Bertonumber1 said:
If you can't get device to show up on adb devices via terminal/command prompt or access settings menu I don't think there's much you can do.
1.Try doing a scan with Fing Network Tools and see if IP shows.
2. Try downloading and installing FireTV remote App on your phone and connecting if it finds stick.
Without adb being activated on the stick, and settings menu unavailable to enable adb there is not much else for it m8, these ebay sticks are dodgy to say the least I've been stung a few times. Even bought one and opened it to find the heat shield casing missing and clk broke lol
Click to expand...
Click to collapse
I'll give those a shot. I tried the jumper technique from the Unbrick Fire TV 2 post and was able to get partway through that process and to the prompt where it tells me to remove the jumper and press enter but it gets an error after copying the files, just before it should boot to twrp. something about the source path being empty. I can post a pic if that's helpful. I think may have forgotten to run the disable modemmanager command so I'll give that another try later. I didn't realize you had to run that every time you reboot linux. I know just enough to be dangerous with it.
Hannover2k said:
I'll give those a shot. I tried the jumper technique from the Unbrick Fire TV 2 post and was able to get partway through that process and to the prompt where it tells me to remove the jumper and press enter but it gets an error after copying the files, just before it should boot to twrp. something about the source path being empty. I can post a pic if that's helpful. I think may have forgotten to run the disable modemmanager command so I'll give that another try later. I didn't realize you had to run that every time you reboot linux. I know just enough to be dangerous with it.
Click to expand...
Click to collapse
Yeah great have a look here too
https://docs.google.com/document/u/0/d/1zYtqmf4RfLOkrPyPjf1C0CjAZf_0E1JohIlTyVY5kGs/mobilebasic
Files here
https://drive.google.com/drive/u/0/mobile/folders/1GbMTBHuFhwT_uyZaJs0ApsG_RQ5Wg_7F
Should work :good:
Bertonumber1 said:
Yeah great have a look here too
https://docs.google.com/document/u/0/d/1zYtqmf4RfLOkrPyPjf1C0CjAZf_0E1JohIlTyVY5kGs/mobilebasic
Files here
https://drive.google.com/drive/u/0/mobile/folders/1GbMTBHuFhwT_uyZaJs0ApsG_RQ5Wg_7F
Should work :good:
Click to expand...
Click to collapse
Unfortunately I can't use those methods. While I can get into the network settings, I can't get into any other settings. I never I never left it connected to wifi so I've been using a LAN cable to test. Booting without the LAN causes it to get an error and takes me to the network settings but I can't get to anything else from there.
Been messing with the jumper method from https://forum.xda-developers.com/fire-tv/development/unbrick-fire-tv-stick-2-anti-rollback-t3986303 but not having any luck yet as per the attached pic. Also tried the unbrick method which gets stuck at 000000200: 0% every time. Just for the heck of it, I shorted DAT0 and ran it and it popped up an error saying it can't locate a 'system' partition. The unit still boots up with the fire tv logo and goes into that demo mode so I'm sure there's a partition present. This is really a challenge! Running out of things to try though.
Hannover2k said:
Unfortunately I can't use those methods. While I can get into the network settings, I can't get into any other settings. I never I never left it connected to wifi so I've been using a LAN cable to test. Booting without the LAN causes it to get an error and takes me to the network settings but I can't get to anything else from there.
Been messing with the jumper method from https://forum.xda-developers.com/fire-tv/development/unbrick-fire-tv-stick-2-anti-rollback-t3986303 but not having any luck yet as per the attached pic. Also tried the unbrick method which gets stuck at 000000200: 0% every time. Just for the heck of it, I shorted DAT0 and ran it and it popped up an error saying it can't locate a 'system' partition. The unit still boots up with the fire tv logo and goes into that demo mode so I'm sure there's a partition present. This is really a challenge! Running out of things to try though.
Click to expand...
Click to collapse
You may have a stick that cannot be rooted/modified via amonet, one with dl mode disabled. These devices around December 2019 started to appear on the market and there's no way round them.
Bertonumber1 said:
You may have a stick that cannot be rooted/modified via amonet, one with dl mode disabled. These devices around December 2019 started to appear on the market and there's no way round them.
Click to expand...
Click to collapse
The device is a Fire TV 2nd gen Sloane so I would expect it to work like others I've rooted, but that kiosk os might do just what you said and disabled DL mode. I'll still play with it a bit but not sure what else can be done. Maybe some new method will come along in the future so I'll just hold on to it.
Thanks for all the input though. Greatly appreciated.
Hannover2k said:
The device is a Fire TV 2nd gen Sloane so I would expect it to work like others I've rooted, but that kiosk os might do just what you said and disabled DL mode. I'll still play with it a bit but not sure what else can be done. Maybe some new method will come along in the future so I'll just hold on to it.
Thanks for all the input though. Greatly appreciated.
Click to expand...
Click to collapse
Sorry mate my bad I thought it was a stick you had I was helping some other guy in firestick tank forum and got mixed up.
Try the short method again only when you get the error :
Leave dc power on (plugged into box)
Remove USB a to USB a cable
Close terminal
Open new terminal up in amonet once again
Run the boot-rom step again BUT hit enter TWICE
Then plug USB cable back in
Pull the dc power and plug it in again
The script should go through
I followed this from another member and it always works for me, has worked on numerous Sloanes. Give it a go, worth a shot mate
Bertonumber1 said:
Sorry mate my bad I thought it was a stick you had I was helping some other guy in firestick tank forum and got mixed up.
Try the short method again only when you get the error :
Leave dc power on (plugged into box)
Remove USB a to USB a cable
Close terminal
Open new terminal up in amonet once again
Run the boot-rom step again BUT hit enter TWICE
Then plug USB cable back in
Pull the dc power and plug it in again
The script should go through
I followed this from another member and it always works for me, has worked on numerous Sloanes. Give it a go, worth a shot mate
Click to expand...
Click to collapse
Thanks for the info, it's worth a try. Just to clarify, when you say to press enter twice, do you mean to press it twice at the prompt where it tells you to remove the short and press enter?
Hannover2k said:
Thanks for the info, it's worth a try. Just to clarify, when you say to press enter twice, do you mean to press it twice at the prompt where it tells you to remove the short and press enter?
Click to expand...
Click to collapse
Hey @Hannover2k, yeah the Sloane is stubborn to root, just keep at it, once you see ***remove short and hit enter** and get an error try leaving it switched on but remove USB, then run the script again and hit enter again after you hit it once, disconnect/reconnect the dc power and plug USB in without the short (if displaying remove short) . Should go through
Another thing...
This what happened to me the other day. If your preloader is gone (it's displaying remove short when there is no short). Disconnect power, disconnect USB, run the the script and connect power and wait 50-70 seconds then plug USB back in.
As I said these Sloanes are tough but you should get it, using the short "jumper" method m8
Bertonumber1 said:
Hey @Hannover2k, yeah the Sloane is stubborn to root, just keep at it, once you see ***remove short and hit enter** and get an error try leaving it switched on but remove USB, then run the script again and hit enter again after you hit it once, diconnect/reconnect the dc power. Should go through
Another thing...
This what happened to me the other day. If your preloader is gone (it's displaying remove short when there is no short). Disconnect power, disconnect USB, run the the script and connect power and wait 50-70 seconds then plug USB back in.
As I said these Sloanes are tough but you should get it, using the short "jumper" method m8
Click to expand...
Click to collapse
Sorry is I'm missing something here. I've been trying to do your method and while I've been getting different error messages and results, I'm still not quite sure I'm doing it right.
After I get the first error after removing the short, you mention above to remove the USB then run the script again, etc. At what point do I plug the USB cable back in? Do I plug the USB back in after removing the power? When I do remove the power, do i need to reconnect the Jumper before plugging it back in?
Sorry if I'm lame, I've just done this jumper thing 100 times and can get many different results but not the one we're looking for! lol
UPDATE: Holy cow, I got it to work the very next time after posting the message! Here's what I did:
1) Ran the script, connected jumper and powered on the device.
2) Got error message.
3) Unplugged USB then re-ran script, pressing enter again after running the command.
4) Plugged USB back in.
I did not reconnect the jumper. When the USB cable was re-connected it did display a message to remove the jumper and press enter, however I did not have to do that. All kinds of stuff started flying all over the screen, then it got to;
Clearing Preloader Header
Flashing Tee
Flashing Bootloader
Flashing Unbrick Image
Flashing Boot
Booting to TWRP
I'm literally grinning ear to ear right now! Thanks for all your help with this! Even if it doesn't work at this point, I'm very happy to have gotten this far!
I can get these kiosk devices for $20 each. Box only, no power or remote. Does anyone think it would be worth it to buy a few of them and try to sell them off with refreshed imaged on them? There's a lot available so just wondering.
Hannover2k said:
Sorry is I'm missing something here. I've been trying to do your method and while I've been getting different error messages and results, I'm still not quite sure I'm doing it right.
After I get the first error after removing the short, you mention above to remove the USB then run the script again, etc. At what point do I plug the USB cable back in? Do I plug the USB back in after removing the power? When I do remove the power, do i need to reconnect the Jumper before plugging it back in?
Sorry if I'm lame, I've just done this jumper thing 100 times and can get many different results but not the one we're looking for! lol
UPDATE: Holy cow, I got it to work the very next time after posting the message! Here's what I did:
1) Ran the script, connected jumper and powered on the device.
2) Got error message.
3) Unplugged USB then re-ran script, pressing enter again after running the command.
4) Plugged USB back in.
I did not reconnect the jumper. When the USB cable was re-connected it did display a message to remove the jumper and press enter, however I did not have to do that. All kinds of stuff started flying all over the screen, then it got to;
Clearing Preloader Header
Flashing Tee
Flashing Bootloader
Flashing Unbrick Image
Flashing Boot
Booting to TWRP
I'm literally grinning ear to ear right now! Thanks for all your help with this! Even if it doesn't work at this point, I'm very happy to have gotten this far!
I can get these kiosk devices for $20 each. Box only, no power or remote. Does anyone think it would be worth it to buy a few of them and try to sell them off with refreshed imaged on them? There's a lot available so just wondering.
Click to expand...
Click to collapse
@Hannover2k Yeah that's you got it sorted then, I tried to explain that method but didn't do a very good job of it lol, make sure you push pre-rooted rom and supersu 2.82 zip to /sdcard, and flash.
Please Remember and note that you cannot flash unsigned zips such as magisk to the Sloane as you're bootloader remains incarcerated , if you're device has cleared preloader and you've entered into twrp it should work
Ps. if you can get a Sloane for that price pm me and we'll sort something, doesn't matter about power cables, remotes etc
Bertonumber1 said:
@Hannover2k Yeah that's you got it sorted then, I tried to explain that method but didn't do a very good job of it lol, make sure you push pre-rooted rom and supersu 2.82 zip to /sdcard, and flash.
Please Remember and note that you cannot flash unsigned zips such as magisk to the Sloane as you're bootloader remains incarcerated , if you're device has cleared preloader and you've entered into twrp it should work
Ps. if you can get a Sloane for that price pm me and we'll sort something, doesn't matter about power cables, remotes etc
Click to expand...
Click to collapse
After flashing the pre-rooted image the first time, everything seemed to work except whenever I restarted via the settings menu, it would show the TWRP pre boot screen but allowing it to continue to boot normally would result in a boot loop. Performing a power cycle would cause the device to skip over the TWRP menu and boot right into the device.
Tried clearing the SD partition and dalvik to free up space as it was only showing about 1.2gb free after the flash. Got the free space back but still the same boot issue after flash, though it did work after a power cycle as opposed to restarting, which I rarely do anyways.
Remembering the Kiosk was for the original echo devices, I got to thinking about it having an older OS again and maybe not liking being flashed directly to the latest version so I re-flashed it to v5.2.6.7_r1. It would boot loop after the TWRP pre login screen but after the first loop it would boot properly. Went ahead and flashed it back to 5.2.7.3_r1 and everything seems to be working perfectly now. Restarts properly and all functionality seems to be present.
I really appreciate your assistance with this. I had them send me another one so I can try this method once more and if it works again, I'll definitely let you know and we'll work something out.
-Han
Hannover2k said:
After flashing the pre-rooted image the first time, everything seemed to work except whenever I restarted via the settings menu, it would show the TWRP pre boot screen but allowing it to continue to boot normally would result in a boot loop. Performing a power cycle would cause the device to skip over the TWRP menu and boot right into the device.
Tried clearing the SD partition and dalvik to free up space as it was only showing about 1.2gb free after the flash. Got the free space back but still the same boot issue after flash, though it did work after a power cycle as opposed to restarting, which I rarely do anyways.
Remembering the Kiosk was for the original echo devices, I got to thinking about it having an older OS again and maybe not liking being flashed directly to the latest version so I re-flashed it to v5.2.6.7_r1. It would boot loop after the TWRP pre login screen but after the first loop it would boot properly. Went ahead and flashed it back to 5.2.7.3_r1 and everything seems to be working perfectly now. Restarts properly and all functionality seems to be present.
I really appreciate your assistance with this. I had them send me another one so I can try this method once more and if it works again, I'll definitely let you know and we'll work something out.
-Han
Click to expand...
Click to collapse
The recovery partition maybe corrupted.
You may try updating twrp to the latest 3.0.05 from Sloane Twrp recovery page.
There you can download the file from here :
https://www.mediafire.com/file/brae6r8lu1np5jm/firetv2_recovery_v6.zip/file
,push it to Sloane /sdcard and run command
from pc
adb shell
Then run:
sh /sdcard/firetv2_recovery_v6.zip
Reboot
That should fix it.
As soon as you update TWRP
Reboot and flash the pre-rooted firmware and supersu 2.82.zip
Then wipe cache, dalvik
Let it boot up and then factory reset (data, dalvik, cache)
Reboot and it should be okay
Bertonumber1 said:
The recovery partition maybe corrupted.
You may try updating twrp to the latest 3.0.05 from Sloane Twrp recovery page.
There you can download the file from here :
https://www.mediafire.com/file/brae6r8lu1np5jm/firetv2_recovery_v6.zip/file
,push it to Sloane /sdcard and run command
from pc
adb shell
Then run:
sh /sdcard/firetv2_recovery_v6.zip
Reboot
That should fix it.
As soon as you update TWRP
Reboot and flash the pre-rooted firmware and supersu 2.82.zip
Then wipe cache, dalvik
Let it boot up and then factory reset (data, dalvik, cache)
Reboot and it should be okay
Click to expand...
Click to collapse
Thanks for the info. The image I installed already had that version of TWRP installed on it but like I said in my last comment, flashing to an older rom then re-flashing back to the latest one seems to have resolved the issue.
No more Kiosk mode, though I wish I could have gotten a look at those files just to see what was going on there.
Anyways, all good now and I have another one of those kiosk units I'm going to try the process again on and if it works, I have access to a lot of these devices so I may refresh them and sell them cheap.
Thanks again for everyones input! Still surprised I got it working normal again.
Bertonumber1 said:
@Hannover2k Yeah that's you got it sorted then, I tried to explain that method but didn't do a very good job of it lol, make sure you push pre-rooted rom and supersu 2.82 zip to /sdcard, and flash.
Please Remember and note that you cannot flash unsigned zips such as magisk to the Sloane as you're bootloader remains incarcerated , if you're device has cleared preloader and you've entered into twrp it should work
Ps. if you can get a Sloane for that price pm me and we'll sort something, doesn't matter about power cables, remotes etc
Click to expand...
Click to collapse
Good news!
I was given a 2nd unit with the same 'issue' and was able to get it to start taking the image within a couple mins. The guy who has them can't do anything with them and has lowered his price per unit so are these worth anything to anyone?
Again, it's the box only, no power cords or remote but I don't expect that to be an issue for someone looking to replace one.
I hope I'm not breaking any rules by asking that but I'm open to any thoughts on this.
-Han
Hannover2k said:
Good news!
I was given a 2nd unit with the same 'issue' and was able to get it to start taking the image within a couple mins. The guy who has them can't do anything with them and has lowered his price per unit so are these worth anything to anyone?
Again, it's the box only, no power cords or remote but I don't expect that to be an issue for someone looking to replace one.
I hope I'm not breaking any rules by asking that but I'm open to any thoughts on this.
-Han
Click to expand...
Click to collapse
@Bertonumber1
Sus_i said:
@Bertonumber1
Click to expand...
Click to collapse
Yeah I've already replied via pm to @Hannover2k I've already bought one with power brick and remote for Roger @Sus_i hannover2k only has the Sloane itself AFAIK I got the full shebang for £27 so it's all good perhaps @Hannover2k can provide a spare and that's us got a couple to got to work on in the name of furthering development
Bertonumber1 said:
Yeah I've already replied via pm to @Hannover2k I've already bought one with power brick and remote for Roger @Sus_i hannover2k only has the Sloane itself AFAIK I got the full shebang for £27 so it's all good perhaps @Hannover2k can provide a spare and that's us got a couple to got to work on in the name of furthering development
Click to expand...
Click to collapse
Hannover2k said:
Sorry is I'm missing something here. I've been trying to do your method and while I've been getting different error messages and results, I'm still not quite sure I'm doing it right.
After I get the first error after removing the short, you mention above to remove the USB then run the script again, etc. At what point do I plug the USB cable back in? Do I plug the USB back in after removing the power? When I do remove the power, do i need to reconnect the Jumper before plugging it back in?
Sorry if I'm lame, I've just done this jumper thing 100 times and can get many different results but not the one we're looking for! lol
UPDATE: Holy cow, I got it to work the very next time after posting the message! Here's what I did:
1) Ran the script, connected jumper and powered on the device.
2) Got error message.
3) Unplugged USB then re-ran script, pressing enter again after running the command.
4) Plugged USB back in.
I did not reconnect the jumper. When the USB cable was re-connected it did display a message to remove the jumper and press enter, however I did not have to do that. All kinds of stuff started flying all over the screen, then it got to;
Clearing Preloader Header
Flashing Tee
Flashing Bootloader
Flashing Unbrick Image
Flashing Boot
Booting to TWRP
I'm literally grinning ear to ear right now! Thanks for all your help with this! Even if it doesn't work at this point, I'm very happy to have gotten this far!
I can get these kiosk devices for $20 each. Box only, no power or remote. Does anyone think it would be worth it to buy a few of them and try to sell them off with refreshed imaged on them? There's a lot available so just wondering.
Click to expand...
Click to collapse
Just wanted to add my Order of Operations to this post. I also bought one of these "Kiosk" boxes without remote or power supply for $13 off of eBay. Great deal, I thought, if I can get it to root. It appears that the order in which you perform the steps is unique to your setup. After trying all the above suggestions with no success (similar errors as listed above), here's what worked for me:
1. Plug in male-to-male USB cable between FTV2 and Linux box
2. Short DAT0 pin on FTV2 board
3. Connect FTV2 AC power
4. Run script
5. Remove short, press enter once when prompted
After TWRP installed (and I figured out how to use it), I was successful in having a usable FTV2 with all of the perks this process brings. Thanks to all who contributed to make this possible, and an extra big thanks to @Hannover2k for being the first to try this on these specifically-challenged boxes. It was a huge help!
Related
About 3 weeks ago, I bricked my Kindle Fire. It was a "spare" that I had, so I started messing around with it. Got TWRP installed, downloaded a couple of ROMS, and attempted to install them. (fortunately, I made a backup of my base Amazon 6.2)
To make a long story short, the fire got stuck. I was able to adb and various other things on this forum to keep things going, but after a while, Kindle Fire Utility (adb, nothing) could see the device. I thought for sure I had an expensive paper weight.
Enter the factory cable. Because SkOrPn was in the middle of a move, my cable didn't get here right away. Then there were some issues with my PayPal address, which SkOrPn went out of his way to fix. Today, I got the cable at my office.
Looked at the cable. Thought I had been send an unmodified cable. Saw no evidence that anything had been done to the cable. An absolutely perfect professional job.
Couldn't wait to get home. Got home. Plugged cable in Fire, then in Laptop. Nothing. Now what? I thought it was supposed to boot the bootloader? adb didn't see the device. Drivers good, it sees my other Fire. I guess I was one of those 1% that hard brick the fire with no chance of getting it back.
Did a few searched on the forum. Found how to install TWRP on my device. I thought I had it already? Ran the commands. Nothing. Switched to regular cable. Nothing. I figured I was screwed. I unplugged the Fire. connected the factory cable. Ran the command. THEN hooked up the cable. JOY JOY JOY!! i GOT TWRP loaded!!!!
Restored my previously saved image, and now I have a working Kindle Fire. NOW i'm going to install some other ROM on it.
The moral is, never give up. Buy a factory cable!!! One of the things I've ever spent $15 or so on. And I recommend SkOrPn as your source. Quality work, great customer service!!!
Step-by-step
1) Make sure you have some charge left in your bricked Kindle. (one of my mistakes
2) Download "Kindle Fire Utility" or other utility that has the fastboot.exe command available.
3) Download twrp-blaze-2.0.0RC0.img (just google it)
4) Without connecting anything, run the command:
fastboot.exe -i 0x1949 boot twrp-blaze-2.0.0RC0.img
5) Connect the factory cable to your Kindle Fire
6) Connect the factory cable to you PC
7) Wait about 10 seconds.
8) DONE!!!!
Sorry for the long post. My wife doesn't understand why this would make me so excited. But you all would, I'm sure.
SteveM
a very nice post for people who have bricked their kindles and need a factory cable!
Thanks for the kind words Steve. I hope this cable gives you confidence in flashing your Kindle long into the future. Glad it worked out for you.
Oh, and you did not see any evidence of modification because I do not modify the cable, I just cut off the original micro connector and install my own, already modified of course with a resistor and all I have to do is re-solder the 4 wires back onto their original pins and then fill the entire casing with 400 degree SureBonder PDR Hot Glue (the worlds strongest known hot glue, according to them anyway lol)... That way it looks and feels like a true manufactured store bought cable. However, doing it my way is still in fact more work, but the end result clearly justifies it.
Anyway, again glad I could be of service to you and my fellow XDA friends.
Where do I run the command from?
The3rdEye said:
Where do I run the command from?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=23747804&postcount=3
smoen02 said:
About 3 weeks ago, I bricked my Kindle Fire. It was a "spare" that I had, so I started messing around with it. Got TWRP installed, downloaded a couple of ROMS, and attempted to install them. (fortunately, I made a backup of my base Amazon 6.2)
To make a long story short, the fire got stuck. I was able to adb and various other things on this forum to keep things going, but after a while, Kindle Fire Utility (adb, nothing) could see the device. I thought for sure I had an expensive paper weight.
Enter the factory cable. Because SkOrPn was in the middle of a move, my cable didn't get here right away. Then there were some issues with my PayPal address, which SkOrPn went out of his way to fix. Today, I got the cable at my office.
Looked at the cable. Thought I had been send an unmodified cable. Saw no evidence that anything had been done to the cable. An absolutely perfect professional job.
Couldn't wait to get home. Got home. Plugged cable in Fire, then in Laptop. Nothing. Now what? I thought it was supposed to boot the bootloader? adb didn't see the device. Drivers good, it sees my other Fire. I guess I was one of those 1% that hard brick the fire with no chance of getting it back.
Did a few searched on the forum. Found how to install TWRP on my device. I thought I had it already? Ran the commands. Nothing. Switched to regular cable. Nothing. I figured I was screwed. I unplugged the Fire. connected the factory cable. Ran the command. THEN hooked up the cable. JOY JOY JOY!! i GOT TWRP loaded!!!!
Restored my previously saved image, and now I have a working Kindle Fire. NOW i'm going to install some other ROM on it.
The moral is, never give up. Buy a factory cable!!! One of the things I've ever spent $15 or so on. And I recommend SkOrPn as your source. Quality work, great customer service!!!
Step-by-step
1) Make sure you have some charge left in your bricked Kindle. (one of my mistakes
2) Download "Kindle Fire Utility" or other utility that has the fastboot.exe command available.
3) Download twrp-blaze-2.0.0RC0.img (just google it)
4) Without connecting anything, run the command:
fastboot.exe -i 0x1949 boot twrp-blaze-2.0.0RC0.img
5) Connect the factory cable to your Kindle Fire
6) Connect the factory cable to you PC
7) Wait about 10 seconds.
8) DONE!!!!
Sorry for the long post. My wife doesn't understand why this would make me so excited. But you all would, I'm sure.
SteveM
Click to expand...
Click to collapse
Hi there,
Where should I run that command from??
Here´s my case, I hope you could help me..
I need urgent help. Just got my kindle todasy and went through tutorial to use the rooting utitily. My kindle got stuck at loading screen and wouldn´t shut shutdown. I waited until the battery ran out. Waited for few more minutes and plugged in the data cable. The kindle now won´t stop blinking and does not get reckgonized by the pc. I did waited for the battery goes dead again, recharged then for about 30 min and nothing has changed. The loading screen keeps blinking and nothing seems to be happening. Please advise!!
andersonrel said:
Hi there,
Where should I run that command from??
Here´s my case, I hope you could help me..
I need urgent help. Just got my kindle todasy and went through tutorial to use the rooting utitily. My kindle got stuck at loading screen and wouldn´t shut shutdown. I waited until the battery ran out. Waited for few more minutes and plugged in the data cable. The kindle now won´t stop blinking and does not get reckgonized by the pc. I did waited for the battery goes dead again, recharged then for about 30 min and nothing has changed. The loading screen keeps blinking and nothing seems to be happening. Please advise!!
Click to expand...
Click to collapse
Oh boy... I'm going to hope that it was a timing issue and our posts got crossed, because I answered your question for another user just above your post.
Regardless, the answer to that question isn't going to help you. You need this...
http://forum.xda-developers.com/showthread.php?t=1621146
Never let your battery die like you did. You can always force a shutdown by keeping the power button pressed down for 20-30 seconds.
EDIT: I'd been meaning to post this guide for a while...
http://forum.xda-developers.com/showthread.php?t=1623244
and I missed the part of your post about being "stuck at loading screen" the first time I read it. I suggest you read this guide...
http://forum.xda-developers.com/showthread.php?t=1552547
make sure the device drivers are working (part 2) and learn some fastboot commands (part 3) so you can reset the bootmode on your device back to normal and reboot it.
kinfauns said:
Oh boy... I'm going to hope that it was a timing issue and our posts got crossed, because I answered your question for another user just above your post.
Regardless, the answer to that question isn't going to help you. You need this...
http://forum.xda-developers.com/showthread.php?t=1621146
Never let your battery die like you did. You can always force a shutdown by keeping the power button pressed down for 20-30 seconds.
EDIT: I'd been meaning to post this guide for a while...
http://forum.xda-developers.com/showthread.php?t=1623244
and I missed the part of your post about being "stuck at loading screen" the first time I read it. I suggest you read this guide...
http://forum.xda-developers.com/showthread.php?t=1552547
make sure the device drivers are working (part 2) and learn some fastboot commands (part 3) so you can reset the bootmode on your device back to normal and reboot it.
Click to expand...
Click to collapse
Thanks for your help. I tried to run a fastboot command and get msg: ´cannot run, adbwin.dll missing´... Now I´m really not sure what it´s missing anymore..
I´m going also leave it charging for longer and it seems to be a known issue, right?
My kindle continues not being reckognized and keeps on flashing the kindle Fire/Android Logo. When I unplug it it stops flashing and I won´t get any sigh of life, even after pressing the button for longer than 30s.
I managed to find the driver on device manager and uninstalled it, thinking that maybe it would help finding the device again, but it didn´t...
Recomendations please?
andersonrel said:
Thanks for your help. I tried to run a fastboot command and get msg: ´cannot run, adbwin.dll missing´... Now I´m really not sure what it´s missing anymore..
I´m going also leave it charging for longer and it seems to be a known issue, right?
My kindle continues not being reckognized and keeps on flashing the kindle Fire/Android Logo. When I unplug it it stops flashing and I won´t get any sigh of life, even after pressing the button for longer than 30s.
I managed to find the driver on device manager and uninstalled it, thinking that maybe it would help finding the device again, but it didn´t...
Recomendations please?
Click to expand...
Click to collapse
Unfortunately, if the device isn't booting up, it won't charge. Like the guide I posted above says, the device needs to load up a ramdisk before it will charge. If all you see is that KF/Android logo, then it's still in the bootloader and it's not charging your battery.
First, you'll have to get your drivers in order so you can send the device fastboot commands. I suggest you disconnect the KF from your computer and make sure it's turned off. Use the KFU driver install file and get it to install the drivers again onto your machine. I'm not sure if it will help, but it wouldn't hurt to reboot your computer after that. When it's back up and running again, open up the device manager. When you connect the KF back up to your computer, it should automatically power up again... look at what device comes up as it boots. The first thing you see (hopefully) is "Android Phone -> Android ADB Interface" appear. If you see that, you can be reasonably sure you can send it fastboot commands.
You'll have to issue the "fastboot oem idme bootmode 4000" on the command line. It will tell you that it's waiting for device... The next time it loops back around in its boot up process, it will send the command and hopefully get the bootmode back to normal. Then hook it up to your stock AC wall charger and if you are lucky it should continue to boot and charge your battery.
There's a lot of "hopefully" things that have to go right for this to work. You've got a few compounded issues that are giving you problems and all of them have to get fixed for the battery to start charging again.
andersonrel said:
Thanks for your help. I tried to run a fastboot command and get msg: ´cannot run, adbwin.dll missing´... Now I´m really not sure what it´s missing anymore..
I´m going also leave it charging for longer and it seems to be a known issue, right?
My kindle continues not being reckognized and keeps on flashing the kindle Fire/Android Logo. When I unplug it it stops flashing and I won´t get any sigh of life, even after pressing the button for longer than 30s.
I managed to find the driver on device manager and uninstalled it, thinking that maybe it would help finding the device again, but it didn´t...
Recomendations please?
Click to expand...
Click to collapse
To fix the "cannot run, adbwin.dll missing", shift + right click on the folder containing adb.exe and select something like "Run as Command"
Sent from my Amazon Kindle Fire using xda premium
soupmagnet said:
To fix the "cannot run, adbwin.dll missing", shift + right click on the folder containing adb.exe and select something like "Run as Command"
Sent from my Amazon Kindle Fire using xda premium
Click to expand...
Click to collapse
I´m gonna try this and will post results. Thanks a lot.
kinfauns said:
Unfortunately, if the device isn't booting up, it won't charge. Like the guide I posted above says, the device needs to load up a ramdisk before it will charge. If all you see is that KF/Android logo, then it's still in the bootloader and it's not charging your battery.
First, you'll have to get your drivers in order so you can send the device fastboot commands. I suggest you disconnect the KF from your computer and make sure it's turned off. Use the KFU driver install file and get it to install the drivers again onto your machine. I'm not sure if it will help, but it wouldn't hurt to reboot your computer after that. When it's back up and running again, open up the device manager. When you connect the KF back up to your computer, it should automatically power up again... look at what device comes up as it boots. The first thing you see (hopefully) is "Android Phone -> Android ADB Interface" appear. If you see that, you can be reasonably sure you can send it fastboot commands.
You'll have to issue the "fastboot oem idme bootmode 4000" on the command line. It will tell you that it's waiting for device... The next time it loops back around in its boot up process, it will send the command and hopefully get the bootmode back to normal. Then hook it up to your stock AC wall charger and if you are lucky it should continue to boot and charge your battery.
There's a lot of "hopefully" things that have to go right for this to work. You've got a few compounded issues that are giving you problems and all of them have to get fixed for the battery to start charging again.
Click to expand...
Click to collapse
I tried to connect to a different pc. It does get recognized on device manager (as kindle) for few seconds and then it dissapears again...not sure what to do now in order to charge it...any suggestions?
Hey guys thanks for all the help so far, i bricked my kindle to the point of no shell after i tried to reflash the stock rom and was stuck in no mans land. So i ordered skorpn's factory cable (thanks again for sending it up north of the border) and when i plug it into the pc it loads the "kindle fire" screen ans stays there. It shows up in device manager but not when i look for it under adb devices and device won't be found in fastboot. Tried reinstalling the drivers and still no luck. Any ideas how i can get this thing back to the point of usability? Thanks for any help you have
andersonrel said:
I tried to connect to a different pc. It does get recognized on device manager (as kindle) for few seconds and then it dissapears again...not sure what to do now in order to charge it...any suggestions?
Click to expand...
Click to collapse
Fix your drivers. Read this:
http://forum.xda-developers.com/showthread.php?p=23747671
djsaxon said:
Hey guys thanks for all the help so far, i bricked my kindle to the point of no shell after i tried to reflash the stock rom and was stuck in no mans land. So i ordered skorpn's factory cable (thanks again for sending it up north of the border) and when i plug it into the pc it loads the "kindle fire" screen ans stays there. It shows up in device manager but not when i look for it under adb devices and device won't be found in fastboot. Tried reinstalling the drivers and still no luck. Any ideas how i can get this thing back to the point of usability? Thanks for any help you have
Click to expand...
Click to collapse
First, fix your drivers:
http://forum.xda-developers.com/showthread.php?p=23747671
Then:
http://forum.xda-developers.com/showthread.php?p=25400963
kinfauns said:
You'll have to issue the "fastboot oem idme bootmode 4000" on the command line. It will tell you that it's waiting for device... The next time it loops back around in its boot up process, it will send the command and hopefully get the bootmode back to normal. Then hook it up to your stock AC wall charger and if you are lucky it should continue to boot and charge your battery.
Click to expand...
Click to collapse
Well I gave this a shot and it said: "finished. total time: 0.080s"
but it's still just flashing the android logo with kindle fire underneath.
maw230 said:
Well I gave this a shot and it said: "finished. total time: 0.080s"
but it's still just flashing the android logo with kindle fire underneath.
Click to expand...
Click to collapse
That's because you have an entirely different problem.
http://forum.xda-developers.com/showthread.php?p=25400963
soupmagnet said:
That's because you have an entirely different problem.
http://forum.xda-developers.com/showthread.php?p=25400963
Click to expand...
Click to collapse
Thank you.
hey i can't doing that, when i type that code "fastboot..........img" cmd say <Waiting for devices> ?
jakelongryan said:
hey i can't doing that, when i type that code "fastboot..........img" cmd say <Waiting for devices> ?
Click to expand...
Click to collapse
There are several reasons why you would get the typical "waiting for device" message, so...
...here is a step-by-step guide instruct you in getting it working properly, quickly and efficiently.
Step 1. Start a new thread in the Q&A section.
Step 2. Explain in GREAT detail exactly what your problem is.
Step 3. Explain in GREAT detail exactly how your problem started.
Step 4. Explain in GREAT detail exactly what you have done to remedy the situation on your own.
Step 5. Explain in GREAT detail exactly what the device does and everything you see from the moment you press the power button until the problem presents itself.
Step 6. Wait patiently until someone of appropriate knowledge is kind enough to lend a hand.
soupmagnet said:
There are several reasons why you would get the typical "waiting for device" message, so...
...here is a step-by-step guide instruct you in getting it working properly, quickly and efficiently.
Step 1. Start a new thread in the Q&A section.
Step 2. Explain in GREAT detail exactly what your problem is.
Step 3. Explain in GREAT detail exactly how your problem started.
Step 4. Explain in GREAT detail exactly what you have done to remedy the situation on your own.
Step 5. Explain in GREAT detail exactly what the device does and everything you see from the moment you press the power button until the problem presents itself.
Step 6. Wait patiently until someone of appropriate knowledge is kind enough to lend a hand.
Click to expand...
Click to collapse
great advice and exactly what im gonna do. been searching for 2 weeks now reading and learning and still stuck so be looking out for my thread
So not paying attention I formatted system and didn't flash new ROM before rebooting. Now I can't get into recovery, even trying alt+sysrq+i, and turning on the system just shows a black screen. The Ouya is being detected as MTP device and no adb/fastboot functions work. Is there any hope in getting this one back in working order?
So this morning I finally got it fixed with the keyboard shortcuts. There are plenty of posts talking about this method but none give any hints as to the timing, so here goes.
Turn system on.
Hold down alt+sysrq+i for five seconds then release for about a half second. Repeat up to six times.
Screen will flash and begin booting into recovery.
Some have mentioned that they get a black screen in recovery and that pressing the Home key repeatedly will bring up the screen.
Flash new ROM and enjoy your Ouya.
I wasn't able to find any general timings so I thought this would be a good place to share my findings. If this helped you please hit thanks!
BUS DR1V3R said:
So this morning I finally got it fixed with the keyboard shortcuts. There are plenty of posts talking about this method but none give any hints as to the timing, so here goes.
Turn system on.
Hold down alt+sysrq+i for five seconds then release for about a half second. Repeat up to six times.
Screen will flash and begin booting into recovery.
Some have mentioned that they get a black screen in recovery and that pressing the Home key repeatedly will bring up the screen.
Flash new ROM and enjoy your Ouya.
I wasn't able to find any general timings so I thought this would be a good place to share my findings. If this helped you please hit thanks!
Click to expand...
Click to collapse
What if that exact timing doesn't work? I've been able to use that method before, but I think I've fully bricked the system.
trevorftard said:
What if that exact timing doesn't work? I've been able to use that method before, but I think I've fully bricked the system.
Click to expand...
Click to collapse
What did you do to the system?
Exactly same prob here, but the keyboard trick doesn't work for me
I messed up after flashing CWM Recovery and perform a full wipe.
Any chance to get it back ?
ElMeteK said:
Exactly same prob here, but the keyboard trick doesn't work for me
I messed up after flashing CWM Recovery and perform a full wipe.
Any chance to get it back ?
Click to expand...
Click to collapse
Do you have ADB access? I might not be the best person to field these questions, but I'll give 'em a try.:good:
BUS DR1V3R said:
Do you have ADB access? I might not be the best person to field these questions, but I'll give 'em a try.:good:
Click to expand...
Click to collapse
Nop, no adb access.
Only showned as MTP device.
ElMeteK said:
Nop, no adb access.
Only showned as MTP device.
Click to expand...
Click to collapse
Ah, I looked high and low for answers for this all day yesterday and must have tried the keyboard trick at least 100 times before I found a timing that worked for me. My only advice would be to keep trying slightly different timings. You may have to use the alt+sysrq+i key combo more times than I did. Try doing it about 10 or 15 times. Just remember to hold the keys for a few seconds, release, and hold again.
My screen eventually flashed green and the system rebooted straight into recovery.
BUS DR1V3R said:
Ah, I looked high and low for answers for this all day yesterday and must have tried the keyboard trick at least 100 times before I found a timing that worked for me. My only advice would be to keep trying slightly different timings. You may have to use the alt+sysrq+i key combo more times than I did. Try doing it about 10 or 15 times. Just remember to hold the keys for a few seconds, release, and hold again.
My screen eventually flashed green and the system rebooted straight into recovery.
Click to expand...
Click to collapse
It's not working for me
I've tried for about an hour unsuccessfully (
ElMeteK said:
It's not working for me
I've tried for about an hour unsuccessfully (
Click to expand...
Click to collapse
Sorry, it worked for me but I was at it for at least 4 or 5 hours before I finally got it to work. All I can tell you is either keep trying or run out and get a new system. :fingers-crossed:
We need a hardware mod to add a recovery button to existing units. As soon as one is available I may offer a cheap service to install any mods needed. Until then we are reliant on a somewhat flakey keyboard shortcut.
BUS DR1V3R said:
So this morning I finally got it fixed with the keyboard shortcuts. There are plenty of posts talking about this method but none give any hints as to the timing, so here goes.
Turn system on.
Hold down alt+sysrq+i for five seconds then release for about a half second. Repeat up to six times.
Screen will flash and begin booting into recovery.
Some have mentioned that they get a black screen in recovery and that pressing the Home key repeatedly will bring up the screen.
Flash new ROM and enjoy your Ouya.
I wasn't able to find any general timings so I thought this would be a good place to share my findings. If this helped you please hit thanks!
Click to expand...
Click to collapse
rather then booting into recovery mine just goes to a black screen with OUYA and a red "!"
am i doing something wrong or do i just have to keep trying? or is it toast?
glitchhawk said:
rather then booting into recovery mine just goes to a black screen with OUYA and a red "!"
am i doing something wrong or do i just have to keep trying? or is it toast?
Click to expand...
Click to collapse
Try pressing the Home key on the keyboard. It may take multiple presses.
BUS DR1V3R said:
Try pressing the Home key on the keyboard. It may take multiple presses.
Click to expand...
Click to collapse
oh man thanks! first time i got into ! screen the menu opened. wow lol. WOOT!! there is still hope!!
glitchhawk said:
oh man thanks! first time i got into ! screen the menu opened. wow lol. WOOT!! there is still hope!!
Click to expand...
Click to collapse
Good stuff, glad you got it going!
I was able to get my Ouya into recovery mode one time after trying off and on for hours, but I had it plugged into my computer monitor and when I changed the monitor source back to DVI (my PC) to see which option in the recovery menu to choose and switched back, the HDMI source showed "no signal". I haven't been able to get it back to that screen since and I wasn't really paying attention to the timing (of course). It's odd to me that since I can see device in ADB while it's booted to black, but "adb reboot recovery" does nothing.
Can someone who has discovered the correct timing and can get into recovery consistently help with these questions? It might help with some other cues to know if you're doing it right rather than just "restart it over and over and try different timings".
1.) Does the power LED on the top of the Ouya stay on when it's in recovery mode?
Occasionally, my power LED will turn off but the device still says it's connected in ADB.2.) If you have the Ouya plugged in via micro-usb when you turn it on, do you hear the USB connect sound?
I'm using Win 7 and depending on my timing I either DO or DO NOT hear the USB connect sound from my speakers as it's connecting as a ADB Composite Interface / MTP Device.3.) Does your Ouya lose HDMI signal in the "boot to recovery" process?
I know not all TV's/monitors timeout at the same interval, but If I leave my Ouya alone it boots to a black screen, messing with the key combo sometimes make its turn blue and show "No Signal"4.) If your USB keyboard has LED's on it to show when caps/num/scroll lock are pressed, do they illuminate when plugged into your Ouya?
I found some documentation on sysrq magic keys in the Android kernel docs, maybe one of the other key combos will have better results?
https://android.googlesource.com/kernel/common/+/experimental/android-3.8/Documentation/sysrq.txt
I finally stumbled upon the right key combo timing again through sheer dumb luck. I took my Ouya out of my office and back into the living room, connected it to my TV with a USB keyboard and gave it one last try before giving up - glad I tried one last time.
For anyone else that is having trouble still, here's some things that might help as well as answers to my questions from above. Some of it is just speculation, but maybe it'll help someone:
Timing: As SOON as I tapped the power button on the Ouya I immediately held down ALT on the keyboard and every few seconds also pressed SYSRQ+i (never letting go of ALT). I believe I did it a total of five times and I stopped as soon as I saw the LED on the top of the Ouya turn off. I didn't really hold down the keys and count a few seconds like I've heard others mention, I just tapped SYSRQ+i around five times while holding down ALT. Menu popped up after the power led turned back on.
Driver: Make sure you followed the guide from the Ouya docs and have the right version of the Google USB driver installed (here's the Windows guide https://devs.ouya.tv/developers/docs/setup#toc_61). When my Ouya was booting to black it was showing up as an Android ADB Interface and a MTP usb device that it couldn't find a driver for. The correct identification should be Android ADB Composite Interface
ADB Make sure you're running the lastest version of ADB (1.0.31 currently). When I ran adb devices on the black screen it would return my device serial number and the string "device" which refers to the state it was in (occasionally this value would "offline" when I'd tried a key-combo that failed to get into recovery mode).
Once I got recovery mode up and selected the adb sideload option adb devices would show my Ouya serial number and say that it was in the "host" state. When I tried the adb sideload otafirmwarefile.zip command, it would fail because adb sideload wasn't a valid command in the older version of adb I was running. Running the google SDK manager from the ADT bundle, removing/re-installing android platform tools and logging out / in to Windows fixed this for me next time I opened a command prompt. Now with the right ADB version running adb devices on my micro-usb connected PC showed my device serial number and "sideload" as it's state.
Answers to my previous questions:
1.) Does the power LED on the top of the Ouya stay on when it's in recovery mode?
Yes and No. The light turned on when I powered it on, after alt+sysrq+i presses the light TURNED OFF momentarily and then turned back on just as the recovery mode screen came up
2.) If you have the Ouya plugged in via micro-usb when you turn it on, do you hear the USB connect sound?
Not sure, when I got into recovery mode I had my micro-usb cable disconnected. I reconnected it once I selected the second option in the recovery menu (adb sideload)
3.) Does your Ouya lose HDMI signal in the "boot to recovery" process?
Yes, at least mine did. I had black screen at boot, then it went to "no signal" at the same time the LED at the top went out, then the screen came back on when the recovery mode screen came up
4.) If your USB keyboard has LED's on it to show when caps/num/scroll lock are pressed, do they illuminate when plugged into your Ouya?
No, the LEDs on my USB keyboard never lit up, but the keyboard was working.
Hi there!
I think I may have bricked my Fire TV Stick 1 (bought at launch in Germany)...
Current situation:
- stick turns on, shows white amazon logo on black background
- continuously rebooting; ~5s black screen, ~5s amazon logo
After months not having it used, I found out I may be able to root it by now. So I did research over the vast amount of threads and posts and was overwhelmed by the information... So I tried to get started but struggled to find the right steps and therefore maybe failed.
I updated it to 5.0.5 (stock) and tried King Root, then Kingo Root, which was a success.
I tried to use the TWRP 3.0.0-7 v2 zip and used the sh command from the respective thread (I thought that was it, since all my devices before used either TWRP or CWM).
To this point, all went through and I wanted to reboot into recovery, but there was only this generic (stock?) red text recovery screen. I waited to be sure, nothing happened and I unplugged it to reboot.
It booted fine and I reflashed the TWRP zip, in case I didn't do it properly. Again it did as expected.
I then pushed the latest prerooted 5.2.0.1 zip and rebooted to recovery, but again this generic screen, so I unplugged it early, I think.
From there on, I got stuck at the white amazon logo, see above.
I did not unlock the bootloader, adb shell confirmed it not being unlocked before.
During bootloops, I did not manage to get any control via adb or fastboot.
So, is it bricked once and for all? If not, how can I save it?
I don't care about anything stored on it.
I also have a Y-USB-OTG cable and connected a keyboard before, but could not interfere yet.
(If bricked, would a Teensy be of any use? I have one from CCast rooting days)
Thanks for reading and in advance.
I had same problem with my fire stick when used the USB power of my TV.
Did you try to power the fire stick TV with the power point and USB adapter?
l_aios said:
Hi there!
I think I may have bricked my Fire TV Stick 1 (bought at launch in Germany)...
Current situation:
- stick turns on, shows white amazon logo on black background
- continuously rebooting; ~5s black screen, ~5s amazon logo
After months not having it used, I found out I may be able to root it by now. So I did research over the vast amount of threads and posts and was overwhelmed by the information... So I tried to get started but struggled to find the right steps and therefore maybe failed.
I updated it to 5.0.5 (stock) and tried King Root, then Kingo Root, which was a success.
I tried to use the TWRP 3.0.0-7 v2 zip and used the sh command from the respective thread (I thought that was it, since all my devices before used either TWRP or CWM).
To this point, all went through and I wanted to reboot into recovery, but there was only this generic (stock?) red text recovery screen. I waited to be sure, nothing happened and I unplugged it to reboot.
It booted fine and I reflashed the TWRP zip, in case I didn't do it properly. Again it did as expected.
I then pushed the latest prerooted 5.2.0.1 zip and rebooted to recovery, but again this generic screen, so I unplugged it early, I think.
From there on, I got stuck at the white amazon logo, see above.
I did not unlock the bootloader, adb shell confirmed it not being unlocked before.
During bootloops, I did not manage to get any control via adb or fastboot.
So, is it bricked once and for all? If not, how can I save it?
I don't care about anything stored on it.
I also have a Y-USB-OTG cable and connected a keyboard before, but could not interfere yet.
(If bricked, would a Teensy be of any use? I have one from CCast rooting days)
Thanks for reading and in advance.
Click to expand...
Click to collapse
I guess you did not read enough.
At this point in time you can only root (kingoroot or kingroot) and replace root with SuperSu on a Firestick. TWRP (recovery) can not be installed because it was not released by rbox as of yet, that particular recovery\pre-rooted image is for firetv1 upgraded to OS5 and not for firestick.
Sorry man.
Have you tried to connect to a computer via USB and run kingoroot or kingroot for windows (whatever you used)? It is a small chance that will recover but it is a slim one....
mjnman said:
I had same problem with my fire stick when used the USB power of my TV.
Did you try to power the fire stick TV with the power point and USB adapter?
Click to expand...
Click to collapse
I could not remember, so I just retried it with two different chargers and two different cables (both used to power my Nexus 5).
Unfortunately resulting in the very same loop... But thanks nonetheless.
bula1ca said:
I guess you did not read enough.
At this point in time you can only root (kingoroot or kingroot) and replace root with SuperSu on a Firestick. TWRP (recovery) can not be installed because it was not released by rbox as of yet, that particular recovery\pre-rooted image is for firetv1 upgraded to OS5 and not for firestick.
Sorry man.
Have you tried to connect to a computer via USB and run kingoroot or kingroot for windows (whatever you used)? It is a small chance that will recover but it is a slim one....
Click to expand...
Click to collapse
Dang... Usually I don't make mistakes this dumb. Guess I learned my first lesson. I'll try to trace my mistake though, for future attempts.
I rooted it with the Kingo app, I think, and got that typical "stuck at 90%" and rebooted it like others did. It rebooted fine and Kingo verified it rooted.
I did not use Windows, I use Ubuntu, occasionally with Wine, yet I had no luck passing USB devices to it. (And always these missing libs...)
Normally, adb and fastboot (console) work fine (i.e. with my phone).
Now I have no chance to interfere with the bootloop, I think.
IIRC, sometimes I could spam commands and at one point adb was stuck at "waiting for device".
I tried to reproduce it just now, but could not get it again.
So, should I try adb or fastboot on another computer to be sure?
Would King(o) for Windows be of any help at this point? If so, what would be my best bet to catch it at some point I can recover it?
Is there any other way I could try? From my nooby perspective, could the bootsplash be an entrance for fastboot? Could it be just stuck trying to access erroneous partitions?
At this point I would try the most crazy and risky idea, since it is unusable anyway.
Thanks both of you for your answers.
l_aios said:
I could not remember, so I just retried it with two different chargers and two different cables (both used to power my Nexus 5).
Unfortunately resulting in the very same loop... But thanks nonetheless.
Dang... Usually I don't make mistakes this dumb. Guess I learned my first lesson. I'll try to trace my mistake though, for future attempts.
I rooted it with the Kingo app, I think, and got that typical "stuck at 90%" and rebooted it like others did. It rebooted fine and Kingo verified it rooted.
I did not use Windows, I use Ubuntu, occasionally with Wine, yet I had no luck passing USB devices to it. (And always these missing libs...)
Normally, adb and fastboot (console) work fine (i.e. with my phone).
Now I have no chance to interfere with the bootloop, I think.
IIRC, sometimes I could spam commands and at one point adb was stuck at "waiting for device".
I tried to reproduce it just now, but could not get it again.
So, should I try adb or fastboot on another computer to be sure?
Would King(o) for Windows be of any help at this point? If so, what would be my best bet to catch it at some point I can recover it?
Is there any other way I could try? From my nooby perspective, could the bootsplash be an entrance for fastboot? Could it be just stuck trying to access erroneous partitions?
At this point I would try the most crazy and risky idea, since it is unusable anyway.
Thanks both of you for your answers.
Click to expand...
Click to collapse
Do you still have root? Is your stick responding to the su command?
If so read this post: http://forum.xda-developers.com/fire-tv/help/guidance-recovering-bootloop-firetv-t3446902
If not:
Try kingoroot for windows however it is a slim change in my opinion as you wrote a FireTv image to your FireStick.
Copy and paste from: http://forum.xda-developers.com/fire-tv/development/guide-fire-stick-replace-king-o-root-t3440923
"IF YOU RUN INTO SOFTBRICK ISSUE (stuck at fire tv logo)
Make sure you have ADB drivers properly installed in your windows pc/laptop.
connect a genuine usb lead to the firestick/pc.
download the windows version of KINGO ROOT and install it.
open KINGO ROOT on the pc with Fire Stick connected up to pc and tv.
wait for the button to pop up and click root.
if you dont see AFTV or get enable debugging in the KINGO ROOT program on pc/laptop please unplug the stick from usb and replug it back in.
if this still wont work restart the pc/laptop or try another pc/laptop.
you should after clicking root boot back up into your homescreen, if it doesnt boot back into your homescreen automatically, wait around 5 minutes and unplug usb and re-plug it again. "
bula1ca said:
Do you still have root? Is your stick responding to the su command?
If so read this post: http://forum.xda-developers.com/fire-tv/help/guidance-recovering-bootloop-firetv-t3446902
If not:
Try kingoroot for windows however it is a slim change in my opinion as you wrote a FireTv image to your FireStick.
Copy and paste from: http://forum.xda-developers.com/fire-tv/development/guide-fire-stick-replace-king-o-root-t3440923
"[...]"
Click to expand...
Click to collapse
Thanks for the links, but from what I see, I need to get past the bootloader splash for adb to work. I'm stuck at the white "amazon" splash, not the colored "FireTV Stick" splash after the amazon one.
Sorry for not making it clear (and for that amount of text that maybe hid it)...
From what I understand and recall, I did only flash the recovery, right? Or does it automatically flash the zip I pushed to internal storage?
And what confuses me, the first attempt booting into recovery AFTER flashing the wrong one I got the former mentioned screen with red text. Reboot worked and the Stick was running. So I did retry and got the same red text after rebooting to recovery. I assumed it did not flash again and unplugged it earlier than the first attempt. Since then it got stuck at the white bootsplash.
Since I am still a noob, it seems to me the system wasn't touched, maybe a faulty recovery integrity forcing the bootloader to loop.
l_aios said:
Thanks for the links, but from what I see, I need to get past the bootloader splash for adb to work. I'm stuck at the white "amazon" splash, not the colored "FireTV Stick" splash after the amazon one.
Sorry for not making it clear (and for that amount of text that maybe hid it)...
From what I understand and recall, I did only flash the recovery, right? Or does it automatically flash the zip I pushed to internal storage?
And what confuses me, the first attempt booting into recovery AFTER flashing the wrong one I got the former mentioned screen with red text. Reboot worked and the Stick was running. So I did retry and got the same red text after rebooting to recovery. I assumed it did not flash again and unplugged it earlier than the first attempt. Since then it got stuck at the white bootsplash.
Since I am still a noob, it seems to me the system wasn't touched, maybe a faulty recovery integrity forcing the bootloader to loop.
Click to expand...
Click to collapse
I have no idea what you did however it will not automatically flash your zip, problem is you installed TRWP that was not meant for Firestick and overwrote its booting sequence. You most probably would had recover from your first attempt by re-installing a new image but once you tried to install it again it most probably finished writing the whole thing and damaged booting sequence.
bula1ca said:
I have no idea what you did however it will not automatically flash your zip, problem is you installed TRWP that was not meant for Firestick and overwrote its booting sequence. You most probably would had recover from your first attempt by re-installing a new image but once you tried to install it again it most probably finished writing the whole thing and damaged booting sequence.
Click to expand...
Click to collapse
Yeah, sad thing I got the wrong device, should have taken my time even more...
I googled the screen I got to two times before getting stuck:
http://forum.xda-developers.com/showpost.php?p=65968901&postcount=60
First time I waited approx. 15 minutes before pulling the plug to reboot. Since I noticed no difference I tried again and got the same screen. But this time I pulled the plug earlier, <1 minute.
I'd like to add that my bootloader was locked. Can I damage the booting sequence by corrupting the recovery or was my mistake that major to be able to do that?
I googled some key combinations to get into recovery or to bypass it, but I don't know if I get the right keys.
With my remote control I don't think I have enough time to hold the keys. Additionally I have a USB keyboard (Cherry KC1000; if possible, which keys btw?) and may be able to connect it via powered Y OTG cable.
So if anyone got any further input or ideas for me to rescue my FTVS, I'd be glad to receive it.
Thanks to all.
Anyone else maybe an idea?
The thing is, I cannot believe it is unsavable.
To summarize the current state (please see full details above):
- stuck in bootloop, white amazon logo
- flashed wrong recovery, after first flash the system booted, after second flash it got stuck (characteristics above)
- never flashed anything other than recovery
Strange thing it booted in first place, but now it refuses. Also I got the screen I mentioned above and unplugged as described above.
Can I possibly bypass the recovery check and try to boot directly to system? Or maybe interrupt for fastboot access?
If connected to PC, can you see it thru 'lsusb'? Or 'dmesg | tail'?
Kramar111 said:
If connected to PC, can you see it thru 'lsusb'? Or 'dmesg | tail'?
Click to expand...
Click to collapse
I tried both
watch -n 0.5 'dmesg | tail'
and
watch -n 0.5 'lsusb'
but with no identification whatsoever.
I double-checked with my Nexus 5 on the same port with the same cable, it identified fine.
One last bump for ideas before putting it into the trash.
Sorry if this is posted in the wrong section, I am never quite sure where these sort of queries should go
To cut a long story short I unlocked and rooted 1 of my FTV 4K sticks, I was struggling with an issue on 1 and ended up installing a Magisk update. I know there are warning all over the forum about this please put it down to a lack of experience.
On reboot it just comes up with the black screen and the white amazon logo, it stays on this for about 2 minutes then restarts to the same black screen. i.e. its caught in a boot loop. It never gets to the white amazon screen.
I bought myself an OTG cable thinking this would get me to twrp so I could go into recovery and wipe it and start again or something, but even with the OTG cable plugged in it still does exactly the same thing. I have tried the same OTG cable and entertainment keyboard setup on another FTV 4K stick and it gives me the 5 second boot menu to get into recovery.
I am guessing I have killed it beyond repair? Is there anything else I can try to do?
Thanks
you need a usb keyboard and then you need to press a combination shown on youtube: , Don't be afraid it is very hard to do it but i can confirm it works 100% for sure!! The timing for holding the key press is all that matters to be successfully...
Try different timings if it's not working on the first run but you need then to hold the buttons for very long time until your fingers feel dead....
..im not sure if adb is working in "safe mode" you need to test that. If yes - you could use "adb reboot recovery".
2. you need to reflash Magisk in core mode.
Aq
dougie175 said:
Sorry if this is posted in the wrong section, I am never quite sure where these sort of queries should go
To cut a long story short I unlocked and rooted 1 of my FTV 4K sticks, I was struggling with an issue on 1 and ended up installing a Magisk update. I know there are warning all over the forum about this please put it down to a lack of experience.
On reboot it just comes up with the black screen and the white amazon logo, it stays on this for about 2 minutes then restarts to the same black screen. i.e. its caught in a boot loop. It never gets to the white amazon screen.
I bought myself an OTG cable thinking this would get me to twrp so I could go into recovery and wipe it and start again or something, but even with the OTG cable plugged in it still does exactly the same thing. I have tried the same OTG cable and entertainment keyboard setup on another FTV 4K stick and it gives me the 5 second boot menu to get into recovery.
I am guessing I have killed it beyond repair? Is there anything else I can try to do?
Thanks
Click to expand...
Click to collapse
You haven't killed your stick, install fastboot drivers and app.
Connect your stick to your pc via usb.
Enter
Code:
fastboot devices
when you see black screen with amazon logo, it should be inside fastboot mode
(If somehow you flashed update to boot.img as written in the guide)
If you see the stick in fastboot mode,
Pull twrp from kamakiri.zip
Place it in fastboot folder
Enter
Code:
fastboot flash boot boot.img
(boot.img or whatever the name of your twrp image)
Code:
fastboot reboot recovery
It should work, if not you can use shorting method again.
Thanks very much both, I will have a play around this evening when I get home from work and the kids are in bed, hopefully with the info above I can get back to recovery again.
Thanks for the help gents, in the end I had to do the shorting method to get the stick to do anything. It took about 6 attempts before kamakiri script even registered it as anything being plugged in, it just kept saying wait for boot.
Once it realised the stick was present and shorted I was away though, I have ended up having to factory reset and wipe everything so will need to start again with it but I am just pleased I don’t need to shell out again for a new stick.
Thanks again for your help
I have a FTVS 2nd gen. When I boot it, I get the Amazon logo, then a brief black screen, then the "Fire TV . . ." screen.
Then, it goes to "Optimising system storage and apps - this may take up to ten minutes". It takes a lot longer than this; then it reboots. Rinse and repeat.
I have an OTG "Y" cable with a logitech K360 wireless keyboard (confirmed working), and a working remote paired to the stick.
I have tried "Back and right" held down throughout the entire boot process with zero response from the stick; I have tried ALT-FN-PrtSc-I repeatedly during the whole time it's on; I have also got funky and tried ALT Gr-FN-PrtSc-I, Alt-FN-Insert-I, and have tried throwing "CTRL" into the mix a few times too.
Nothing elicits any response from the stick. I don't think that the stick gets to the point of firing up the network stack, so there's no ADB via wifi; and of course I can't enable debugging via USB so there's no ADB by USB either.
Is there any way I can proceed? It's so old I don't mind opening it up if I have to, but that's a last resort.
TIA for informed responses.
dossvidanya said:
I have a FTVS 2nd gen. When I boot it, I get the Amazon logo, then a brief black screen, then the "Fire TV . . ." screen.
Then, it goes to "Optimising system storage and apps - this may take up to ten minutes". It takes a lot longer than this; then it reboots. Rinse and repeat.
I have an OTG "Y" cable with a logitech K360 wireless keyboard (confirmed working), and a working remote paired to the stick.
I have tried "Back and right" held down throughout the entire boot process with zero response from the stick; I have tried ALT-FN-PrtSc-I repeatedly during the whole time it's on; I have also got funky and tried ALT Gr-FN-PrtSc-I, Alt-FN-Insert-I, and have tried throwing "CTRL" into the mix a few times too.
Nothing elicits any response from the stick. I don't think that the stick gets to the point of firing up the network stack, so there's no ADB via wifi; and of course I can't enable debugging via USB so there's no ADB by USB either.
Is there any way I can proceed? It's so old I don't mind opening it up if I have to, but that's a last resort.
TIA for informed responses.
Click to expand...
Click to collapse
Yes you can follow the thread "Unlock Root Twrp Unbrick Firetv Stick Tank" and once youve unlocked and rooted, flash a new fimware and start fresh.
Something has became corrupted in your sticks /system folder. Just take your time and follow the steps to the letter and dont be scared to ask for help if you get stuck.
Regards
Bertonumber1 said:
Yes you can follow the thread "Unlock Root Twrp Unbrick Firetv Stick Tank" and once youve unlocked and rooted, flash a new fimware and start fresh.
Something has became corrupted in your sticks /system folder. Just take your time and follow the steps to the letter and dont be scared to ask for help if you get stuck.
Regards
Click to expand...
Click to collapse
Thank you my man, much appreciated!
OK, a combination of my shakes and my traditional mini soldering iron (HUGE compared to this circuit) I am unable to complete step 2 which is to short the CLK line to GND. At the risk of damaging my stick, I've given up.