Hi.
I got a note 2 and would like to have an odin image with the official state as I bought it before I start tinkering with it (root, flashing rom, etc) so I can restore it if I need to claim warranty service.
The issue is: The firmware is of the austrian mobile operator 3 (www.drei.at) and I did not find an official firmware for it!
Can someone point me to it if it exists (did not find it on http://www.sammobile.com/firmware)?
Else: Is it possible to create an "official" system dump of it that works with odin? So if I restore from that created firmware it restores to the state I bought it without anything changed (no custom firmware counter increased, etc).?
I know there are some guides on how to create odin dumps, but they are rather complicated and I am unclear if I restore from one of those if it counts it as official (does it need to be signed for that and anyone not from samsung even do that?) and does not increase it.
Can you help me?
http://forum.xda-developers.com/showthread.php?t=1951091
You can root your phone and do whatever you want, and whenever you want. You can simply return to official warranty version by following steps in first reply of the link i attached.
Thanks
I don't think you get want I mean:
I know how rooting and flashing and odin works, i've done it lots of times. And i've also returned phones to stock.
Until now however I always had unlocked devices with completely official samsung firmwares, but now I have an oparator specific firmware: that of 3 austria.
I did not find an image for this firmware, so I cannot flash back the correct stock image because I did not find that specific image provided anywhere.
So my question:
- Where do I get the firmware JRO03C.N7100XXALIJ for 3 austria? Is it even available?
- If not: can I create it myself?
On http://www.sammobile.com/firmware the only option sensible that gives me results is the latest 10...
Is there a way to view all firmwares for a device (i.e.: n7100) to make sure mine is not among them?
this site is much better. you won't find that firmware exactly but you find other updates for your specific region!
http://samsung-updates.com/device/?id=GT-N7100
Ok.... Crazy Situation here.
I can not update from 4.2.2. When I try to update I get 'Registration Failed' message right before the update should start. I did register this tablet with my account @ samsung, but no joy.
Here is the backstory on this: My S 8.4 battery connector broke and I got a used main-board off ebay. I replaced it, did a factory reset, and I got 4.2.2 working. However no lollipop. I checked the codes on this 'new' tab:
Country is: France/FR
Original CSC Code: AUT
Firmware CSC Code: MKT
Active CSC Code: MKT
Current Firmware as reported by Kies: T700XXU0ANE3/T700MKT0ANE3/T700XXU0ANE3/T700XXU0ANE3 (MKT)
Yes, all one line.
I'm in USA and I'm hoping to get to the correct firmware.
I want to use odin to update to 5.0.2, but just want to make sure I can use this rom:
Product code XAR
PDA T700XXU1BOK1
CSC T700XAR1BOK1
Is this my ticket out of this problem?
Thanks
amberSamsung said:
Ok.... Crazy Situation here.
I can not update from 4.2.2. When I try to update I get 'Registration Failed' message right before the update should start. I did register this tablet with my account @ samsung, but no joy.
Here is the backstory on this: My S 8.4 battery connector broke and I got a used main-board off ebay. I replaced it, did a factory reset, and I got 4.2.2 working. However no lollipop. I checked the codes on this 'new' tab:
Country is: France/FR
Original CSC Code: AUT
Firmware CSC Code: MKT
Active CSC Code: MKT
Current Firmware as reported by Kies: T700XXU0ANE3/T700MKT0ANE3/T700XXU0ANE3/T700XXU0ANE3 (MKT)
Yes, all one line.
I'm in USA and I'm hoping to get to the correct firmware.
I want to use odin to update to 5.0.2, but just want to make sure I can use this rom:
Product code XAR
PDA T700XXU1BOK1
CSC T700XAR1BOK1
Is this my ticket out of this problem?
Thanks
Click to expand...
Click to collapse
You should be just fine flashing T700XXU1BOK1 with Odin. I've installed other region firmwares before without issue.
EDIT: If you'd prefer the French region though, go here (http://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647) and use the software provided to download whichever firmware you need or want. Just enter the PDA and CSC into the appropriate fields.
Thanks noxarcana.
I was hoping that this would do it. BTW: Nice little tool you linked to!
From what I read the CSC codes now come from inside the ROM, so once I go with T700XXU1BOK1, I will get USA region? Just want to make sure.
And this update WILL wipe everything out, right?
Did anybody try IronMan ROM for T700? http://forum.xda-developers.com/galaxy-tab-s/development/stock-tw-rom-galaxy-tab-s-8-4-t2995235
How does this MOD deal with the country codes? Would it be USA?
Thanks
So, I thought I had replied to this but apparently I my mind lied to me. Yes, if you flash BOK1, you will be using the US region (also known as Cellular South...for some reason).
IronRom is one of my top 3 roms for this device! Since it is a custom rom though, you don't have to worry about CSC and PDA codes. Just make sure you get the correct zip file for your device (ie: T700, 5T800, etc.).
Sent from my SM-T700 using Tapatalk
My phone was working fine and suddenly one day it got stuck on booting screen, then i have tried everything including flashing Rom, but all in vain, finally i ordered a new motherboard from aliexpress.com, the phone got started but everything is in Chinese language, play store was not there and even it is not working when installed from other sources, even whatsapp not working and i am not able to install without google play store. Earlier version installed in the new chinese motherboard was android 4.1.2 and it was asking for software update , when i have updated its software to 4.3 , baseband version N7100ZCUEB1 AND KERNEL VERSION 3.2.31-2859655, BUILD NUMBER JSS15J.N7100CUEOK1.,due to chinese version i am not able to use whatsapp or playstore.After updating the phone, i am not able to make a call and it shows the error "not registered on network" even the apps installed by me are not working, kindly advice what to do, should i use any other version or anything else.This is a chinese motherboard and i want change its software to indian version, what should i do?
Boot into download mode to confirm the model #. If it is a Note 2 made for the Chinese market, the Play store may not function on the phone.
audit13 said:
Boot into download mode to confirm the model #. If it is a Note 2 made for the Chinese market, the Play store may not function on the phone.[/QUOTE
its version is GT-N7100_CHN_CHINEXYNOS4412, can i flash any other ROM in this motherboard?
Click to expand...
Click to collapse
Hmm, looks like it might be the China version of the Note 2 which has limited features. Search XDA for the Note 2 China version and you'll see that many people have problems with flashing ROMs.
Can you send it back and get the international version of the motherboard?
audit13 said:
Hmm, looks like it might be the China version of the Note 2 which has limited features. Search XDA for the Note 2 China version and you'll see that many people have problems with flashing ROMs.
Can you send it back and get the international version of the motherboard?
Click to expand...
Click to collapse
It may be international version because it is shipped for India, is it possible to flash any other ROM and if yes pls guide me how to do, coz i have never done this before. Thanks in advance
If the phone was the international version, it should say "GT-N7100" in Odin mode. See the picture from post number 1: http://forum.xda-developers.com/showthread.php?t=2618261
There's nothing wrong. You need to write the IMEI to the phone memory. By the way you didn't need to buy the entire motherboard. Only the phone memory (16gb eMMC) was corrupt. Samsung produced faulty emmc in the early S3 and Note 2 models (google and you'll see). Mine had same problem I took it to repair shop and they replaced the emmc and wrote the IMEI. Charged me around $40 in local currency. Just tell them you have corrupt IMEI and they'll do it for very little amount of money. After you do that, flash TWRP custom recovery and take back up of your EFS and Modem folder (the IMEI is located here). Then you can upgrade to 4.4.2 and restore EFS and Modem from TWRP.
I don't think it is corrupt or defective chip since 4.3 successfully installed on the phone.
i have changed the CSC code from CHN to INU, after then when i went to recovery mode it shows INU in place of CHN, but i was not able to flash indian ROM in that via odin 3.09, it shows the message "nand write start : failed" and finally failed.
When tried with ODIN 3.07 it shows the error, serial port is not communicating , while USB debugging is allowed in my phone.In recov ery mode it shows the phone detail GT-N7100_CHN_CHINEXYNOS4412 and downside it shows CSC code INU, could any one suggest which ROM to FLASH and how?
CWM recovery is already flashed in it and it is already rooted.
I tried to flash offical 4.4.2 ROM indian version and failed , could anybody pls suggest anything else.
I know of no way to flash a non-Chinese ROM to this phone. I have seen people try to get a ROM onto a Chinese phone. When they do get the ROM installed, The Play store will not run.
The CSC is simply a carrier customization. The problem is the bootloader which prevent the installation of non-authorized ROMs.
audit13 said:
I know of no way to flash a non-Chinese ROM to this phone. I have seen people try to get a ROM onto a Chinese phone. When they do get the ROM installed, The Play store will not run.
The CSC is simply a carrier customization. The problem is the bootloader which prevent the installation of non-authorized ROMs.
Click to expand...
Click to collapse
This ROM is not official, it is a custom ROM as seen in recovery mode.
Based on your first post, the phone looks to be running official 4.3 Chinese rom: http://www.sammobile.com/firmwares/database/GT-N7100/CHN/
All Samsung phones made for mainland China have very tight restrictions on the rom, bootloader, and apps.
audit13 said:
I don't think it is corrupt or defective chip since 4.3 successfully installed on the phone.
Click to expand...
Click to collapse
i think you misunderstood my post...I said his PREVIOUS emmc was faulty. Now that he bought and entirely new motherboard( which has the emmc) he everything is fine. He just needs to write the IMEI to connect to network (not registered on network error).
---------- Post added at 01:24 AM ---------- Previous post was at 01:22 AM ----------
Hey if you can't flash other ROMs from odin..
take it to repair shop, they have 3rd party hardware flashing tools, they'll flash the latest 4.4.2 international rom.
I'm not sure if it's possible to flash an international ROM on the phone. Also, the phone may not have the necessary hardware to support the carrier's radio frequencies. If the phone shows the correct imei, not being able to connect to a cell carrier could be a hardware limitation.
audit13 said:
I'm not sure if it's possible to flash an international ROM on the phone. Also, the phone may not have the necessary hardware to support the carrier's radio frequencies. If the phone shows the correct imei, not being able to connect to a cell carrier could be a hardware limitation.
Click to expand...
Click to collapse
before up-gradation of this new chinese rom , network was working fine , so it must be enabled for the frequency range.
The phone may have been running a custom ROM or a hack to allow the phone to work with your carrier? I'm not sure but it does sound like the motherboard is made for mainland China.
Sorry for the simple question. This is rather new to me. Stats: Samsung Galaxy S7 SM-G930FXX. (Global unlocked). The firmware on the phone is listed as G930FXXS5ESEA. Now, recently I made the mistake of allowing an update. That update completed but on reboot the phone reported an error in the firmware. The phone still booted, but no keyboard was available. I guess it didn't fully load. I am now looking to reflash the firmware but cannot find a datafile with that exact name. The phone country is Germany according to the IMEI. Q: Is it true I can use any G930F firmware? I've search for this firmware for hours but to no success.
Hello,
I have changed the CSC of my Active 2 44mm (not LTE). Everything has been correct, except for two things:
1 - I still get the green letters when I start the clock, on the Samsung Galaxy Watch Active 2 presentation
2 - Now I try to upgrade by OTA (through the phone's app) and when it reboots, it says that the firmware could not be installed.
How do I fix both? Thanks
Put everything back the way it was (Fully Restore to Default) and try to update software.
Are you able to identify Model Name?
I hate this mm nons.nse.
Example:
SM-R820?
I am too lazy to google how long is yours... Firmware.
Colors in Booting is Engineer Bootloader sboot.bin (from Combination firmware) is still on device... this brings FOTA over the air to fail...
Because wrong Bootloader on device... from "chain of trust" selfcheck...
Best Regards
hi, I have a similar issue with the sm-r825f, after I changed csc to Germany... I got a watch from UK (BTU) unfortunately and wasn't able to set up esim. Now after I changed csc and flashed R825FXXU1ASJ3, esim works fine but I am stuck on ONE UI 1.5 and scanning for updates keeps failing.
What's the easiest way to make OTA work again?
Can I simply reflash a certain firmware? Can you recommend or link the files?
Sry if any information is missing!
Thank you all for your help!