Related
Please Help me.
First, i'm sorry about my English
my phone is Redmi note 5 AI (China version), still Locked. but i'm so stupid. i used Xiaomi Tool to flash from China Stable (miui9 9.5.22) to China Dev (Miui10 8.5.7), and now my phone is Hard Brick. Screen is dark, no fastboot, no recovery, can't power on, no charging LED. i knew i stuck in EDL because when i plug in to PC, it's recognized "Qualcomm ... 9008". i used Miflash but it had error:"read hello packet" or "cannot receive hello packet". Then i remove phone's back cover and Test Point, but i had another error :" cannot read port COM" or "the file name,....... Open Programmer.....". I tried all Miflash and rom version, with another way like change folder name shorter, use mifash beta, run as..., ..... but it's still not working now.
The worst case is the problem with mainboard and i hope not.
I'm obstructive now. Please help me
This Problem Is Solved?
huynhovip said:
Please Help me.
First, i'm sorry about my English
my phone is Redmi note 5 AI (China version), still Locked. but i'm so stupid. i used Xiaomi Tool to flash from China Stable (miui9 9.5.22) to China Dev (Miui10 8.5.7), and now my phone is Hard Brick. Screen is dark, no fastboot, no recovery, can't power on, no charging LED. i knew i stuck in EDL because when i plug in to PC, it's recognized "Qualcomm ... 9008". i used Miflash but it had error:"read hello packet" or "cannot receive hello packet". Then i remove phone's back cover and Test Point, but i had another error :" cannot read port COM" or "the file name,....... Open Programmer.....". I tried all Miflash and rom version, with another way like change folder name shorter, use mifash beta, run as..., ..... but it's still not working now.
The worst case is the problem with mainboard and i hope not.
I'm obstructive now. Please help me
Click to expand...
Click to collapse
This Problem Is Solved? If Yes Please Guide Me, I'm also got bricked
I got the exact same problem. Description fits! Did you guys solve the problem?
Flash using QFIL and cracked firehose fix this, I was tried on 4 hardbricked Whyred AI and all of them working fine till today..
Sent from my Redmi Note 5 Pro using XDA Labs
I have tried with all of the stable china versions:
10.0.2
10.0.1
9.6.4
9.6.3
9.5.22
with this file prog_emmc_firehose_Sdm660_ddr.elf
It still doesn't boot after successful flashing.
Hi, i don't know what happened but i'll explain with details.
My Redmi note 5(global) was on the last miui.eu, his ANTI is 3.
Today i went to the street, used the Uber app and came back to home like always, as i can remember, the phone had 50% battery. A couple minutes later i was using the web whatsapp on PC and the software disconnected, at the first moment i didn't understood because the wifi was online, but when i took my RN5 he was turned off and didn't turned on anymore. I tried to power on the device and nothing, i put on USB and discovered the issue
QUECTEL QDLoader 900(COM6) : EDL?
I tried to use MiFlash and after trying flash the rom, i received : Cannot read hello packet
What?? My phone bricked like the ARB Issue even if my ANTI is 3????
He's dead and i don't know what to do, Xiaomi doesn't give the authorization anymore, someone could help me?
Use miflash beta and flash with arb3 fastboot rom
devcon69 said:
Use miflash beta and flash with arb3 fastboot rom
Click to expand...
Click to collapse
I used the last MiFlash, who needs the authorized Mi Account
first it should be in 9008 mode .. u need to trip edl points to make it in 9008/ edl mode as per my knowledge . check the link it may help
https://forum.xda-developers.com/lenovo-zuk-z2/how-to/reboot-to-edl9008-modetotally-bricked-t3720932
I tried everything, my ID isn't authorized, just need this from Xiaomi :crying:
Maybe this will work for you. Read carefully
http://en.miui.com/thread-3450268-1-1.html
My phone is redmi note 5 pro. I flashed miuibeta 8.4 from beta 8.8 with twrp . I cleared system before reboot but not data. As i reboot,now my phone is stuck in edl mode. Wont got to fastboot,no logo,no vibrate,no led. Only miflash detect it. Butas flash got a failed to receive hello packet error. Can anyone help me out asap
If you werent that lazy and first tried reading forum or using search you would know, that to solve this problem you need to do is hold power button on phone for like 10s. Also, if you werent lazy and did research first, you would know that you have ARB brick, and in order to fix that you need authorized account.
Thank for the reply but i wouldn't have posted this if any of these methods works
Tens of people got hello packet error and every single one of them solved it by pressing and holding power button when required. Might also check if all your drivers are correct
Can it be flash from another authorized account other then the one on phone
Mikebsimte said:
Can it be flash from another authorized account other then the one on phone
Click to expand...
Click to collapse
Yes, as long as its authorized account. Authorized account can be used once for unbricking. If someone unbricked, and you use same account to unbrick another device, it wont work
Hello! Yesterday I flashed the Xiaomi rom to my Redmi 6 pro mi flash tool and now the phone only shows black screen, and when i connect to PC the notification light blinking and the PC recognize only in Qualcomm 9008 mode. What can I do in this situation?
can someone authorized my account for edl authentication
Use qualcomm msm download tool
What exactly you did please tell
Try using QFIL (installed with QPST). I hypothesize that the old flash programmer binary (prog_emmc_firehose_8953_ddr.mbn) does not require authentication like the new one. Open rawprogram0.xml with QFIL and follow the instructions to flash your device.
Note, I did not try this myself, try at your own risk.
I've tried qfil. It will not work. You'll get an error as well. I've ended with flashing while someone else logged to his account via TeamViewer on my pc. It costed me 12$ but he was an honest man and he wanted the payment after job done.
coolek33 said:
I've tried qfil. It will not work. You'll get an error as well. I've ended with flashing while someone else logged to his account via TeamViewer on my pc. It costed me 12$ but he was an honest man and he wanted the payment after job done.
Click to expand...
Click to collapse
Which fastboot rom version did you take the firehose programmer from?
I've flashed China developer roms. Don't remember which one exactly but it was still on Android 8.1. After this I've flashed xiaomi.eu on Android 9 and video recording wasn't working. So I have to flash in fastboot latest China dev to fix it.
coolek33 said:
I've tried qfil. It will not work. You'll get an error as well. I've ended with flashing while someone else logged to his account via TeamViewer on my pc. It costed me 12$ but he was an honest man and he wanted the payment after job done.
Click to expand...
Click to collapse
Hi, Unfortunately I'm also facing the same problem. I have tried everything from Fastboot to EDL mode nothing works.
As my bootloader mistakenly got locked & Now I'm stuck with blank screen, I have access to EDL Mode on my redmi 6 pro but while I try to flash a stock rom it ask for mi auth account. Sadly I don't have
I try to contact the Mi service to provide me the special permission to flash stock ROM on my redmi 6 pro but they say that "No such permission can be granted now"
It would be helpful if you provide me the contact details of the person you used to unbrick your phone via teamviewer.
You have to search one for yourself. Unfortunately the guy that helped me is not responding anymore. I've found someone else but he was to expensive and I don't remember who it was. There's a bunch of guys out there that can help you. Just be careful cause not all of them are fair.
coolek33 said:
You have to search one for yourself. Unfortunately the guy that helped me is not responding anymore. I've found someone else but he was to expensive and I don't remember who it was. There's a bunch of guys out there that can help you. Just be careful cause not all of them are fair.
Click to expand...
Click to collapse
Ok, Thanks for the quick response.
Hello,
My phone got hard bricked yesterday after the MIUI 11 update. It was running fine before on lastest MIUI10 global ROM with persistent TWRP, root and magisk. Bootloader is unlocked.
The phone dont turn on anymore and just show a white notification led when plugged to a PC. No recovery or fastboot access
If i press volume up when i plug it to my pc, it show up as "Mediatek USB Port" and disappear after 5 seconds.
I tried to open the phone/ removing battery, shorting EDL test points, but nothing happens.
My only solution appears to be using Sp_flash_tool but seems like i need an authorized Mi account flash the stock ROM.
Do someone know where i can get acces to one of those account ?
Thanks for your replies guys !
Redmi Note 8 Pro Hard Bricked
I'm in the same situation.
please help me
Hello,
The same thing happened to me when I installed the Orange FOX recovery, it didn't go into Fastboot mode, so I had to press the 3 buttons and wait for it to turn off completely, open the ADB control console and then connect it to the PC via USB by pressing the volume + button.
The latter I did on several occasions (Turn it off completely and connect by USB). Until I recognized it, when I recognized them, I had to flash the SYSTEM, CUST, RECOVERY. One by one, in total it took almost 5 minutes.
After that the phone started normal, obviously without root, nor custom recovery.
I'm also in the same situation as all of you, the PC doesn't recognize me and I can't go into fastboot
Hey,
I tried everything I could (battery connected/unplugged), my phone seems to have a corrupted preloader and only start the boot rom. That's why it shows up as "Mediatek USB PORT", if the preloader was'nt corrupted, it should be named "MediaTek PreLoader USB VCOM port" or something similar.
The only way to recover it imo is to flash a healthy preloader using SPFlashTool low level flash mode and next flash a full rom when "MediaTek PreLoader USB VCOM port" appears in the device manager.
Unfortunately, xiaomi ask for a certified account for low level flashing. I found one but the guy ask for 40$ for just logging it into my pc with teamviewer.
I buyed a Samsung Note10+ in replacement and i'll just wait someone find a solution to sell my 10-day-used redmi if I can revive it one day.
I got hundreds $ of Xiaomi home automation products in my home, but that was my first phone from this brand. I think it will also be the last.
I'm sad to see that their security policy on the phones is so frustrating to the people who just want to have a full acces on their devices.
Authorise can be done with professional tools
Tools like umt, hydra tool, miracle xiaomi tool, does the authorization. And i think mtk cpu Auth will only be available in miracle xiaomi tool, be aware every Auth cost credit of 4 to 10 u will have but credit separate from the tool.. Hope this will help
MOD EDIT: quote removed help our devlopers lmao to get atleast one rom ??
They only need to unbrick sometimes.
girishjangir7 said:
MOD EDIT: name removed help our devlopers lmao to get atleast one rom ??
They only need to unbrick sometimes.
Click to expand...
Click to collapse
Where is this post??
Some hours ago an user MOD EDIT: name removed offers help to unbrick devices but all threads was deleted??? Why?
djzero86 said:
Where is this post??
Some hours ago an user MOD EDIT: name removed offers help to unbrick devices but all threads was deleted??? Why?
Click to expand...
Click to collapse
It's against forum rules to post paid services
Y0annC said:
Hello,
My phone got hard bricked yesterday after the MIUI 11 update. It was running fine before on lastest MIUI10 global ROM with persistent TWRP, root and magisk. Bootloader is unlocked.
The phone dont turn on anymore and just show a white notification led when plugged to a PC. No recovery or fastboot access
If i press volume up when i plug it to my pc, it show up as "Mediatek USB Port" and disappear after 5 seconds.
I tried to open the phone/ removing battery, shorting EDL test points, but nothing happens.
My only solution appears to be using Sp_flash_tool but seems like i need an authorized Mi account flash the stock ROM.
Do someone know where i can get acces to one of those account ?
Thanks for your replies guys !
Click to expand...
Click to collapse
I Faced The Same Problem Of Bricked Phone Of Redmi Note 8 Pro, I Was Unable To Enter Fastboot Mode, Recovery Mode & Even Can't Enter Into The System Because I Flash Wrong Boot.img File, Thereafter I Tried To Use SP Flash Tool But Failed Due To Xiaomi Authorised Account Issue. Then I Emailed Xiaomi For Getting My Account Authorised And They Emailed Back And Told Me That They Can't Authorise My Account..
Then I Decided To Visit Mi Service Centre As My Phone Was In Warranty, The Funniest Fact Is The Technicians Existed There Were Failed To Detect The Problem. I Told Them That My Phone Was Automatically Got Dead After Installing An Update Just For Making Them Unaware From The Real Fact.
I Told Them That There Is No Hardware Issue Only Need To Flash Original Firmware But They Are Freak And Didn't Listen To Me And Opened Up Every Part Of The Phone, Now They Told Me That The Phone Will Need 7 Days Of Repairing Take The Phone After 7 Days.
I Tried To Teach Them The Way By Which The Phone Could Be Repaired But They Only Listen To Me And Did Nothing, They Were Behaving Like A Beginner In Repairing Phone,
They Didn't Know That The Phone Can Also Be Reapired During Switched Off.
Now I Have To Wait For 7 Days, So Guys Flash Anything Carefully Otherwise You Will Face The Same Situation.
Thanks
Well I guess I won't unlock my device... To be honest I have no reason to do so. The phone is running great and I have adguard and removed all the apps I don't like using adb.
petenoni said:
Well I guess I won't unlock my device... To be honest I have no reason to do so. The phone is running great and I have adguard and removed all the apps I don't like using adb.
Click to expand...
Click to collapse
I Also Had Adguard But I Was Still Not Satisfied
I Wanted My Phone To Be Rooted And Use The Custom ROMs If Build In Future.
Hemant Singh Rajput said:
I Faced The Same Problem Of Bricked Phone Of Redmi Note 8 Pro, I Was Unable To Enter Fastboot Mode, Recovery Mode & Even Can't Enter Into The System Because I Flash Wrong Boot.img File, Thereafter I Tried To Use SP Flash Tool But Failed Due To Xiaomi Authorised Account Issue. Then I Emailed Xiaomi For Getting My Account Authorised And They Emailed Back And Told Me That They Can't Authorise My Account..
Then I Decided To Visit Mi Service Centre As My Phone Was In Warranty, The Funniest Fact Is The Technicians Existed There Were Failed To Detect The Problem. I Told Them That My Phone Was Automatically Got Dead After Installing An Update Just For Making Them Unaware From The Real Fact.
I Told Them That There Is No Hardware Issue Only Need To Flash Original Firmware But They Are Freak And Didn't Listen To Me And Opened Up Every Part Of The Phone, Now They Told Me That The Phone Will Need 7 Days Of Repairing Take The Phone After 7 Days.
I Tried To Teach Them The Way By Which The Phone Could Be Repaired But They Only Listen To Me And Did Nothing, They Were Behaving Like A Beginner In Repairing Phone,
They Didn't Know That The Phone Can Also Be Reapired During Switched Off.
Now I Have To Wait For 7 Days, So Guys Flash Anything Carefully Otherwise You Will Face The Same Situation.
Thanks
Click to expand...
Click to collapse
mine only take 3 hours at the service center in Jaipur
Y0annC said:
Hello,
My phone got hard bricked yesterday after the MIUI 11 update. It was running fine before on lastest MIUI10 global ROM with persistent TWRP, root and magisk. Bootloader is unlocked.
The phone dont turn on anymore and just show a white notification led when plugged to a PC. No recovery or fastboot access
If i press volume up when i plug it to my pc, it show up as "Mediatek USB Port" and disappear after 5 seconds.
I tried to open the phone/ removing battery, shorting EDL test points, but nothing happens.
My only solution appears to be using Sp_flash_tool but seems like i need an authorized Mi account flash the stock ROM.
Do someone know where i can get acces to one of those account ?
Thanks for your replies guys !
Click to expand...
Click to collapse
hi
does anyone find a solution for this?
please help
Well there is now a way to bypass the need for an authorized account, if you device is unbricked. Basically if you flash this before you brick your phone, it allows you to use sp flash to unbrick it without authorized account.
Read this thread:
https://forum.xda-developers.com/redmi-note-8-pro/how-to/guide-redmi-note-8-pro-megathread-t4056527
JuanM2020 said:
Well there is now a way to bypass the need for an authorized account, if you device is unbricked. Basically if you flash this before you brick your phone, it allows you to use sp flash to unbrick it without authorized account.
Read this thread:
https://forum.xda-developers.com/redmi-note-8-pro/how-to/guide-redmi-note-8-pro-megathread-t4056527
Click to expand...
Click to collapse
doesn't work
samadsaba said:
doesn't work
Click to expand...
Click to collapse
This is only for unbricked devices.... As I stated. If your device was already bricked it won't help you.
I also faced this problem... I used paid service to unbrick it... I must pay 35USD for the service.. but just wait.. If it works I will post here again. I bricked my phone when flashed anti brick on Android 10.. I forgot downgrade it to Android 9