Related
Hi, can someone help? I was about to flash the official whyred Linedage OS for my Redmi Note 5. I did that with note 3 and note 4 before, so kind of knew what I was doing.. But was not aware of the antirollback thing.. So after i decided to flash the new miui 10 firs for the firmware..(wasn't the best idea I know) and you know the rest.. something went wrong and now I am stuck with dead phone.. no recovery, no fastboot, nothing.. I had unlocked bootloader officially a few weeks ago, got the device connected with the mi account (not sure about if the account is authorized or not).
I tried the test point method - dissembling the device from miui dot com
I have the right driver listed in device manager (Qualcom HS-USB QDLoader 9008)
I tried several roms listed here or miui dot com
I tired several versions of MiFlash
Every time I only get the message about not reading the com port (tried all USB ports on two PCs, reinstalled drivers .. everything) .. It starts flashing "read hello packet", then after 5 seconds stops with the mesage "can not read from port comXY"
In edb its just waiting for the device on any command (or not devices found)
Anyone can help please? I spent the whole day searching for solution and found nothing, or nothing helps
thx in advance
I am in your same situation. did you solved it?
thank you
rfiore said:
I am in your same situation. did you solved it?
thank you
Click to expand...
Click to collapse
Yeah, posted my ID on the forum, got authorized, then used the "portable" miflash and it worked.. But on the other PC still got errors in miflash.. didn't even check for the authorization, so I suppose its PC related.. perhaps something with the drivers..
FKuzel said:
Hi, can someone help? I was about to flash the official whyred Linedage OS for my Redmi Note 5. I did that with note 3 and note 4 before, so kind of knew what I was doing.. But was not aware of the antirollback thing.. So after i decided to flash the new miui 10 firs for the firmware..(wasn't the best idea I know) and you know the rest.. something went wrong and now I am stuck with dead phone.. no recovery, no fastboot, nothing.. I had unlocked bootloader officially a few weeks ago, got the device connected with the mi account (not sure about if the account is authorized or not).
I tried the test point method - dissembling the device from miui dot com
I have the right driver listed in device manager (Qualcom HS-USB QDLoader 9008)
I tried several roms listed here or miui dot com
I tired several versions of MiFlash
Every time I only get the message about not reading the com port (tried all USB ports on two PCs, reinstalled drivers .. everything) .. It starts flashing "read hello packet", then after 5 seconds stops with the mesage "can not read from port comXY"
In edb its just waiting for the device on any command (or not devices found)
Anyone can help please? I spent the whole day searching for solution and found nothing, or nothing helps
thx in advance
Click to expand...
Click to collapse
I faced the similar situation. I pasted the ID in the russian and english forum. I got no message for weeks, I thought of flashing again, Voila. Device flashed and turned ON. Your device is hard bricked as mine, it needs authentication from Mi to flash via EDL mode. All you need to do is download the MI flash tool portable, and paste your Mi ID in forums.
Unfortunately both the forum's date to paste the ID has been expired. But still you try to get help from someone else from the forum or the moderators.
I'll explain different errors I faced and the solution for it.
"not reading the com port" --- You get this error when you flash Global version of the ROM. Use the Developer version of it.
"It starts flashing "read hello packet"" --- You get this error because edl is turned off in your phone. To turn it back ON, just remove the USB cable from your phone and then press the power button for 10-15 seconds. Then connect your phone back again and try to flash.
"edb its just waiting for the device on any command" --- Actually this is not an error. Your phone is hard bricked. While in hard bricked mode adb won't work. ADB works only in fastboot mode.
Simple.. Disconnect and Reconnect with your PC Via Testpoint.. Thanks.
thank you very much
Prabudeva005 said:
I faced the similar situation. I pasted the ID in the russian and english forum. I got no message for weeks, I thought of flashing again, Voila. Device flashed and turned ON. Your device is hard bricked as mine, it needs authentication from Mi to flash via EDL mode. All you need to do is download the MI flash tool portable, and paste your Mi ID in forums.
Unfortunately both the forum's date to paste the ID has been expired. But still you try to get help from someone else from the forum or the moderators.
I'll explain different errors I faced and the solution for it.
"not reading the com port" --- You get this error when you flash Global version of the ROM. Use the Developer version of it.
"It starts flashing "read hello packet"" --- You get this error because edl is turned off in your phone. To turn it back ON, just remove the USB cable from your phone and then press the power button for 10-15 seconds. Then connect your phone back again and try to flash.
"edb its just waiting for the device on any command" --- Actually this is not an error. Your phone is hard bricked. While in hard bricked mode adb won't work. ADB works only in fastboot mode.
Click to expand...
Click to collapse
I was lose hope because 12 hour my mido error cant read hello packet, and now fix it with your tips.. thanks a lot man
Prabudeva005 said:
I faced the similar situation. I pasted the ID in the russian and english forum. I got no message for weeks, I thought of flashing again, Voila. Device flashed and turned ON. Your device is hard bricked as mine, it needs authentication from Mi to flash via EDL mode. All you need to do is download the MI flash tool portable, and paste your Mi ID in forums.
Unfortunately both the forum's date to paste the ID has been expired. But still you try to get help from someone else from the forum or the moderators.
I'll explain different errors I faced and the solution for it.
"not reading the com port" --- You get this error when you flash Global version of the ROM. Use the Developer version of it.
"It starts flashing "read hello packet"" --- You get this error because edl is turned off in your phone. To turn it back ON, just remove the USB cable from your phone and then press the power button for 10-15 seconds. Then connect your phone back again and try to flash.
"edb its just waiting for the device on any command" --- Actually this is not an error. Your phone is hard bricked. While in hard bricked mode adb won't work. ADB works only in fastboot mode.
Click to expand...
Click to collapse
Thank you. I was in the "read hello packet" part and i was able to flash the Chinese rm
Thanks
Can u please give me your mi authorized I'd it will help for me
Am also stuck on edl mode redmi note 5 pro so please give me your mi I'd
Raviganthy said:
Am also stuck on edl mode redmi note 5 pro so please give me your mi I'd
Click to expand...
Click to collapse
https://forum.xda-developers.com/redmi-note-5-pro/how-to/fix-arb-bricked-device-qfil-t3841780
Help!
Help! i am also stuck on this problem on my Redmi 3. Can someone please help me?:crying:
---------- Post added at 06:18 AM ---------- Previous post was at 06:15 AM ----------
FKuzel said:
Yeah, posted my ID on the forum, got authorized, then used the "portable" miflash and it worked.. But on the other PC still got errors in miflash.. didn't even check for the authorization, so I suppose its PC related.. perhaps something with the drivers..
Click to expand...
Click to collapse
What forum?
can not read from port com xy
guilherme06 said:
Thank you. I was in the "read hello packet" part and i was able to flash the Chinese rm
Thanks
Click to expand...
Click to collapse
Hello, I've tried even developer rom, it displays the same error can not read from port com xy.
Even after doing test-point all over again.
By mistake I flashed wayne rom once, and phone boots but in a messed up fastboot mode.
talhosvi said:
Hello, I've tried even developer rom, it displays the same error can not read from port com xy.
Even after doing test-point all over again.
By mistake I flashed wayne rom once, and phone boots but in a messed up fastboot mode.
Click to expand...
Click to collapse
I have the same problem with my jasmine(which used to be wayne) when I tried to change it back into wayne again... do you have any solution already ?
kunoir said:
I have the same problem with my jasmine(which used to be wayne) when I tried to change it back into wayne again... do you have any solution already ?
Click to expand...
Click to collapse
have you find any solution?
jayspiker said:
have you find any solution?
Click to expand...
Click to collapse
i had the same problem but fixed with edl cable
Prabudeva005 said:
I faced the similar situation. I pasted the ID in the russian and english forum. I got no message for weeks, I thought of flashing again, Voila. Device flashed and turned ON. Your device is hard bricked as mine, it needs authentication from Mi to flash via EDL mode. All you need to do is download the MI flash tool portable, and paste your Mi ID in forums.
Unfortunately both the forum's date to paste the ID has been expired. But still you try to get help from someone else from the forum or the moderators.
I'll explain different errors I faced and the solution for it.
"not reading the com port" --- You get this error when you flash Global version of the ROM. Use the Developer version of it.
"It starts flashing "read hello packet"" --- You get this error because edl is turned off in your phone. To turn it back ON, just remove the USB cable from your phone and then press the power button for 10-15 seconds. Then connect your phone back again and try to flash.
"edb its just waiting for the device on any command" --- Actually this is not an error. Your phone is hard bricked. While in hard bricked mode adb won't work. ADB works only in fastboot mode.
Click to expand...
Click to collapse
where can i find this chinese rom for MI A3
talhosvi said:
can not read from port com xy
Hello, I've tried even developer rom, it displays the same error can not read from port com xy.
Even after doing test-point all over again.
By mistake I flashed wayne rom once, and phone boots but in a messed up fastboot mode.
Click to expand...
Click to collapse
same problem with me . Have you solved it ?? let me know please
Hi Guys,
I have the same problem trying to flash MIUI 11 in mi A3 with MIUI 12. Anyone knows a solution for this?
you see, I made a bad installation of a rom and my phone no longer turns on (I can not enter bootloader or recovery mode) try to restore it by my flash. I recognize my flash device as COM but at the time of starting the flash it asks for an MI account (I log in with the account which is synchronized to the phone) but it always sends me error. I have been told that there is a solution through something called test point, but as far as I understand this is for the computer to recognize the phone. which I already do. Any advice or tutorial?
(sorry my english, I speak spanish.)
Modularkarma said:
you see, I made a bad installation of a rom and my phone no longer turns on (I can not enter bootloader or recovery mode) try to restore it by my flash. I recognize my flash device as COM but at the time of starting the flash it asks for an MI account (I log in with the account which is synchronized to the phone) but it always sends me error. I have been told that there is a solution through something called test point, but as far as I understand this is for the computer to recognize the phone. which I already do. Any advice or tutorial?
(sorry my english, I speak spanish.)
Click to expand...
Click to collapse
Error doesnt say much.. atleast write what does the error say... And yes, there is also qfil flashing method, which can revive basically dead device. But you have to open up device, take off back panel, and touch 2 metal thingies with a tweezers or something similar to enter qfil. I made a huge mistake few months ago, accidentally flashed firmware of another device onto RN5 and it just went through it, then it turned off, and was completely dead. No signs of life whatsoever, so i revived it using qfil method and flash stock firmware again. There are guides in this forum.
No
Incogn said:
Error doesnt say much.. atleast write what does the error say... And yes, there is also qfil flashing method, which can revive basically dead device. But you have to open up device, take off back panel, and touch 2 metal thingies with a tweezers or something similar to enter qfil. I made a huge mistake few months ago, accidentally flashed firmware of another device onto RN5 and it just went through it, then it turned off, and was completely dead. No signs of life whatsoever, so i revived it using qfil method and flash stock firmware again. There are guides in this forum.
Click to expand...
Click to collapse
what type of firmware did you install, because I try it with the official firmware of the page and it does not leave me, it asks me for a miui account but when I put it it tells me to authenticate failed edl
Modularkarma said:
No
what type of firmware did you install, because I try it with the official firmware of the page and it does not leave me, it asks me for a miui account but when I put it it tells me to authenticate failed edl
Click to expand...
Click to collapse
Yes, i also had authentication errors, thats why i had to open device, short 2 contacts, then phone entered edl mode, and i succesfully fixed it using qfil method of which there is a guide in this forum
Incogn said:
Yes, i also had authentication errors, thats why i had to open device, short 2 contacts, then phone entered edl mode, and i succesfully fixed it using qfil method of which there is a guide in this forum
Click to expand...
Click to collapse
I did all the test point process, I tried to flash several fastboots but the phone does not turn on, it flashes normally but when I try to turn it on, it does not turn on. I have the redmi note 5, I bought it in Colombia.
Incogn said:
Yes, i also had authentication errors, thats why i had to open device, short 2 contacts, then phone entered edl mode, and i succesfully fixed it using qfil method of which there is a guide in this forum
Click to expand...
Click to collapse
I did all the test point process, I tried to flash roms fastboots but the phone does not turn on, it flashes normally but when I try to turn it on, it does not turn on. I have the redmi note 5, I bought it in Colombia.
Hello,
My phone got hard bricked yesterday after the MIUI 11 update. It was running fine before on lastest MIUI10 global ROM with persistent TWRP, root and magisk. Bootloader is unlocked.
The phone dont turn on anymore and just show a white notification led when plugged to a PC. No recovery or fastboot access
If i press volume up when i plug it to my pc, it show up as "Mediatek USB Port" and disappear after 5 seconds.
I tried to open the phone/ removing battery, shorting EDL test points, but nothing happens.
My only solution appears to be using Sp_flash_tool but seems like i need an authorized Mi account flash the stock ROM.
Do someone know where i can get acces to one of those account ?
Thanks for your replies guys !
Redmi Note 8 Pro Hard Bricked
I'm in the same situation.
please help me
Hello,
The same thing happened to me when I installed the Orange FOX recovery, it didn't go into Fastboot mode, so I had to press the 3 buttons and wait for it to turn off completely, open the ADB control console and then connect it to the PC via USB by pressing the volume + button.
The latter I did on several occasions (Turn it off completely and connect by USB). Until I recognized it, when I recognized them, I had to flash the SYSTEM, CUST, RECOVERY. One by one, in total it took almost 5 minutes.
After that the phone started normal, obviously without root, nor custom recovery.
I'm also in the same situation as all of you, the PC doesn't recognize me and I can't go into fastboot
Hey,
I tried everything I could (battery connected/unplugged), my phone seems to have a corrupted preloader and only start the boot rom. That's why it shows up as "Mediatek USB PORT", if the preloader was'nt corrupted, it should be named "MediaTek PreLoader USB VCOM port" or something similar.
The only way to recover it imo is to flash a healthy preloader using SPFlashTool low level flash mode and next flash a full rom when "MediaTek PreLoader USB VCOM port" appears in the device manager.
Unfortunately, xiaomi ask for a certified account for low level flashing. I found one but the guy ask for 40$ for just logging it into my pc with teamviewer.
I buyed a Samsung Note10+ in replacement and i'll just wait someone find a solution to sell my 10-day-used redmi if I can revive it one day.
I got hundreds $ of Xiaomi home automation products in my home, but that was my first phone from this brand. I think it will also be the last.
I'm sad to see that their security policy on the phones is so frustrating to the people who just want to have a full acces on their devices.
Authorise can be done with professional tools
Tools like umt, hydra tool, miracle xiaomi tool, does the authorization. And i think mtk cpu Auth will only be available in miracle xiaomi tool, be aware every Auth cost credit of 4 to 10 u will have but credit separate from the tool.. Hope this will help
MOD EDIT: quote removed help our devlopers lmao to get atleast one rom ??
They only need to unbrick sometimes.
girishjangir7 said:
MOD EDIT: name removed help our devlopers lmao to get atleast one rom ??
They only need to unbrick sometimes.
Click to expand...
Click to collapse
Where is this post??
Some hours ago an user MOD EDIT: name removed offers help to unbrick devices but all threads was deleted??? Why?
djzero86 said:
Where is this post??
Some hours ago an user MOD EDIT: name removed offers help to unbrick devices but all threads was deleted??? Why?
Click to expand...
Click to collapse
It's against forum rules to post paid services
Y0annC said:
Hello,
My phone got hard bricked yesterday after the MIUI 11 update. It was running fine before on lastest MIUI10 global ROM with persistent TWRP, root and magisk. Bootloader is unlocked.
The phone dont turn on anymore and just show a white notification led when plugged to a PC. No recovery or fastboot access
If i press volume up when i plug it to my pc, it show up as "Mediatek USB Port" and disappear after 5 seconds.
I tried to open the phone/ removing battery, shorting EDL test points, but nothing happens.
My only solution appears to be using Sp_flash_tool but seems like i need an authorized Mi account flash the stock ROM.
Do someone know where i can get acces to one of those account ?
Thanks for your replies guys !
Click to expand...
Click to collapse
I Faced The Same Problem Of Bricked Phone Of Redmi Note 8 Pro, I Was Unable To Enter Fastboot Mode, Recovery Mode & Even Can't Enter Into The System Because I Flash Wrong Boot.img File, Thereafter I Tried To Use SP Flash Tool But Failed Due To Xiaomi Authorised Account Issue. Then I Emailed Xiaomi For Getting My Account Authorised And They Emailed Back And Told Me That They Can't Authorise My Account..
Then I Decided To Visit Mi Service Centre As My Phone Was In Warranty, The Funniest Fact Is The Technicians Existed There Were Failed To Detect The Problem. I Told Them That My Phone Was Automatically Got Dead After Installing An Update Just For Making Them Unaware From The Real Fact.
I Told Them That There Is No Hardware Issue Only Need To Flash Original Firmware But They Are Freak And Didn't Listen To Me And Opened Up Every Part Of The Phone, Now They Told Me That The Phone Will Need 7 Days Of Repairing Take The Phone After 7 Days.
I Tried To Teach Them The Way By Which The Phone Could Be Repaired But They Only Listen To Me And Did Nothing, They Were Behaving Like A Beginner In Repairing Phone,
They Didn't Know That The Phone Can Also Be Reapired During Switched Off.
Now I Have To Wait For 7 Days, So Guys Flash Anything Carefully Otherwise You Will Face The Same Situation.
Thanks
Well I guess I won't unlock my device... To be honest I have no reason to do so. The phone is running great and I have adguard and removed all the apps I don't like using adb.
petenoni said:
Well I guess I won't unlock my device... To be honest I have no reason to do so. The phone is running great and I have adguard and removed all the apps I don't like using adb.
Click to expand...
Click to collapse
I Also Had Adguard But I Was Still Not Satisfied
I Wanted My Phone To Be Rooted And Use The Custom ROMs If Build In Future.
Hemant Singh Rajput said:
I Faced The Same Problem Of Bricked Phone Of Redmi Note 8 Pro, I Was Unable To Enter Fastboot Mode, Recovery Mode & Even Can't Enter Into The System Because I Flash Wrong Boot.img File, Thereafter I Tried To Use SP Flash Tool But Failed Due To Xiaomi Authorised Account Issue. Then I Emailed Xiaomi For Getting My Account Authorised And They Emailed Back And Told Me That They Can't Authorise My Account..
Then I Decided To Visit Mi Service Centre As My Phone Was In Warranty, The Funniest Fact Is The Technicians Existed There Were Failed To Detect The Problem. I Told Them That My Phone Was Automatically Got Dead After Installing An Update Just For Making Them Unaware From The Real Fact.
I Told Them That There Is No Hardware Issue Only Need To Flash Original Firmware But They Are Freak And Didn't Listen To Me And Opened Up Every Part Of The Phone, Now They Told Me That The Phone Will Need 7 Days Of Repairing Take The Phone After 7 Days.
I Tried To Teach Them The Way By Which The Phone Could Be Repaired But They Only Listen To Me And Did Nothing, They Were Behaving Like A Beginner In Repairing Phone,
They Didn't Know That The Phone Can Also Be Reapired During Switched Off.
Now I Have To Wait For 7 Days, So Guys Flash Anything Carefully Otherwise You Will Face The Same Situation.
Thanks
Click to expand...
Click to collapse
mine only take 3 hours at the service center in Jaipur
Y0annC said:
Hello,
My phone got hard bricked yesterday after the MIUI 11 update. It was running fine before on lastest MIUI10 global ROM with persistent TWRP, root and magisk. Bootloader is unlocked.
The phone dont turn on anymore and just show a white notification led when plugged to a PC. No recovery or fastboot access
If i press volume up when i plug it to my pc, it show up as "Mediatek USB Port" and disappear after 5 seconds.
I tried to open the phone/ removing battery, shorting EDL test points, but nothing happens.
My only solution appears to be using Sp_flash_tool but seems like i need an authorized Mi account flash the stock ROM.
Do someone know where i can get acces to one of those account ?
Thanks for your replies guys !
Click to expand...
Click to collapse
hi
does anyone find a solution for this?
please help
Well there is now a way to bypass the need for an authorized account, if you device is unbricked. Basically if you flash this before you brick your phone, it allows you to use sp flash to unbrick it without authorized account.
Read this thread:
https://forum.xda-developers.com/redmi-note-8-pro/how-to/guide-redmi-note-8-pro-megathread-t4056527
JuanM2020 said:
Well there is now a way to bypass the need for an authorized account, if you device is unbricked. Basically if you flash this before you brick your phone, it allows you to use sp flash to unbrick it without authorized account.
Read this thread:
https://forum.xda-developers.com/redmi-note-8-pro/how-to/guide-redmi-note-8-pro-megathread-t4056527
Click to expand...
Click to collapse
doesn't work
samadsaba said:
doesn't work
Click to expand...
Click to collapse
This is only for unbricked devices.... As I stated. If your device was already bricked it won't help you.
I also faced this problem... I used paid service to unbrick it... I must pay 35USD for the service.. but just wait.. If it works I will post here again. I bricked my phone when flashed anti brick on Android 10.. I forgot downgrade it to Android 9
my phone is automatically in 9008 mode because of installing and opening the chinese apk today. i have been using my rooted poco f3 since 6 months & till now there were no any issue but today suddenly i installed one chinese apk & after opening it my phone has gone to 9008 edl mode. so, i am not able to move to fastboot, recovery & any option. only, when i connect my phone to pc i see 9008 in drivers & that's all. Also, i downloaded the firmware & tried to flash it with mi tool in my pc& it is asking some authentication but when i entered my mi account it will not load anything. also i have twrp recovery official backups. what's the solution my friends, brother. has any one got the solution to boot into normal mode.
Totally wrong forum. I wil ask the moderators to move this to the correct forum.
roshansai said:
my phone is automatically in 9008 mode because of installing and opening the chinese apk today. i have been using my rooted poco f3 since 6 months & till now there were no any issue but today suddenly i installed one chinese apk & after opening it my phone has gone to 9008 edl mode. so, i am not able to move to fastboot, recovery & any option. only, when i connect my phone to pc i see 9008 in drivers & that's all. Also, i downloaded the firmware & tried to flash it with mi tool in my pc& it is asking some authentication but when i entered my mi account it will not load anything. also i have twrp recovery official backups. what's the solution my friends, brother. has any one got the solution to boot into normal mode.
Click to expand...
Click to collapse
bro just go to sc and tell your phone not opening thats all they will take 2 hours to repair and also read this fourm its helpful
I have doubts
recently i bricked my phone and it's in edl mode which I had posted here also where people told me to go to service center and do edl flashing but but will they ask money ig they can't because my phone is under warranty and its just 2 months old...
forum.xda-developers.com
TeckySairam said:
bro just go to sc and tell your phone not opening thats all they will take 2 hours to repair and also read this fourm its helpful
I have doubts
recently i bricked my phone and it's in edl mode which I had posted here also where people told me to go to service center and do edl flashing but but will they ask money ig they can't because my phone is under warranty and its just 2 months old...
forum.xda-developers.com
Click to expand...
Click to collapse
bro service center is not near from me. i am on desert it is 200km far from me
roshansai said:
bro service center is not near from me. i am on desert it is 200km far from me
Click to expand...
Click to collapse
Then see some yt vuds and ull get some autherized pll for auth acc u need to pay 600 rupees for the auth acc then jsyt flash
Hello, I am a poco f3 user and i've been using this phone for quite a while. till now i never had any problem installing or using custom rom. i was using cr droid and wanted to go for corvus os. after flashing corvus os through twrp my phone never rebooted and device manager showing qualcomm port 9008. after searching i found out i need patched firehose file for no auth flashing but couldn't find any file for poco f3. if anyone could help me with any solution then plz help me. i can't afford online servirces fees cause i'm broke af. so if anyone has any solution then plz help me
how did you manage to put it on QCOM mode? wrong custom rom flashed?
fireclouu said:
how did you manage to put it on QCOM mode? wrong custom rom flashed?
Click to expand...
Click to collapse
at first i was able to go into fastboot mood. then with miflash tool i tried to flash the firmwere but antirollback error given. then i left the phone in that fastboot mood for a while. some times after the screeen was black and i tried to boot into fastboot but nothing happened. so when i plugged it with pc the qcom port notification appered and after searching i found out that my phone was in edl mood
Zaman6234 said:
at first i was able to go into fastboot mood. then with miflash tool i tried to flash the firmwere but antirollback error given. then i left the phone in that fastboot mood for a while. some times after the screeen was black and i tried to boot into fastboot but nothing happened. so when i plugged it with pc the qcom port notification appered and after searching i found out that my phone was in edl mood
Click to expand...
Click to collapse
you can remove antirollback, just edit those checkpoints on notepad it will run fine, be sure to flash correct firmware corresponds to your version and release, mine's global so i choose global
but since your problem is now on edl, well... hmm no one but with authorized mi account can bypass miflash tool. either take it to xiaomi directly if it was covered with warranty hoping to get it fixed
dont fall to 25$ guys, sure yeah they hold the keys but thats soo much
fireclouu said:
you can remove antirollback, just edit those checkpoints on notepad it will run fine, be sure to flash correct firmware corresponds to your version and release, mine's global so i choose global
but since your problem is now on edl, well... hmm no one but with authorized mi account can bypass miflash tool. either take it to xiaomi directly if it was covered with warranty hoping to get it fixed
dont fall to 25$ guys, sure yeah they hold the keys but thats soo much
Click to expand...
Click to collapse
yea right but the thing is that mine was purchased from another country so here xiaomi won't take itas a warranty product. I was hoping ir I could find someone here who has the mi authorized account or tell me how to get one. if it costs me to pay only once for getting a permanent mi authorized account I will definitely go for that
Zaman6234 said:
yea right but the thing is that mine was purchased from another country so here xiaomi won't take itas a warranty product. I was hoping ir I could find someone here who has the mi authorized account or tell me how to get one. if it costs me to pay only once for getting a permanent mi authorized account I will definitely go for that
Click to expand...
Click to collapse
I think I've heard of ppl on telegram offering this.
Zaman6234 said:
Hello, I am a poco f3 user and i've been using this phone for quite a while. till now i never had any problem installing or using custom rom. i was using cr droid and wanted to go for corvus os. after flashing corvus os through twrp my phone never rebooted and device manager showing qualcomm port 9008. after searching i found out i need patched firehose file for no auth flashing but couldn't find any file for poco f3. if anyone could help me with any solution then plz help me. i can't afford online servirces fees cause i'm broke af. so if anyone has any solution then plz help me
Click to expand...
Click to collapse
did you try to flash stock firmware using any qcom toolin windows?
tutibreaker said:
did you try to flash stock firmware using any qcom toolin windows?
Click to expand...
Click to collapse
Hello, I have tried to flash with qfil but it gave an error mostly because of the mi authentication part of the firmware. I searched for some time and found out that I need a patched firehose file to bypass the edl authentication problem. But if U have any Solutions or suggestions then plz tell me. i will try to apply your method
Zaman6234 said:
yea right but the thing is that mine was purchased from another country so here xiaomi won't take itas a warranty product. I was hoping ir I could find someone here who has the mi authorized account or tell me how to get one. if it costs me to pay only once for getting a permanent mi authorized account I will definitely go for that
Click to expand...
Click to collapse
the thing is that you cant get authorized mi account, someone offers it remotely
surely xiaomi centers can help you with that, if youre paying those remote flashers I suggest you take it there hoping to assist you
or just wait for some exploits on miflash to arise but surely that takes time
Goofy ahh locked EDL mode. Sent you a contact person in dm lol
Zaman6234 said:
Hello, I have tried to flash with qfil but it gave an error mostly because of the mi authentication part of the firmware. I searched for some time and found out that I need a patched firehose file to bypass the edl authentication problem. But if U have any Solutions or suggestions then plz tell me. i will try to apply your method
Click to expand...
Click to collapse
I have the exact same problem as you. My F3 is only loading the QCOM port and not loading in to fastboot. Please can you tell what did you do to get it working?
symbiansucks said:
I have the exact same problem as you. My F3 is only loading the QCOM port and not loading in to fastboot. Please can you tell what did you do to get it working?
Click to expand...
Click to collapse
This is my understanding. You have 2 options:
Go to Xiaomi Service Center and let them repair it (worth trying/checking out, even if out-of-warranty I think!).
Or, contacting someone who's got an Authorised Xiaomi Account who'd be able to flash the ROM. That's what I did:
I contacted a group on Telegram, got in contact with the moderator. Paid 23€ over PayPal. Needed to wait a few hours for his technician to become available for me. I had to send him TeamViewer session credentials, so he can remote-connect to my PC. He was then available and connected to my PC. I had prepared with the latest MIUI Fastboot ROM and made sure my phone is connected and detected by Windows as a QCOM device. He downloaded some zipped piece of software, opened it, had to move out the TeamViewer session and came back and entered some kind of a Token into that program. He then used Mi Flash (I don't know if *my* Mi Flash, or from his downloaded zip-file), flashed the ROM and it worked.
Actually, during the flash in Mi Flash, my phone disconnected once, which was my fault though. He got a little annoyed, but he flashed it the second time and it worked.
It sounds very sketchy, but it's what I did, and it worked.
cyanGalaxy said:
This is my understanding. You have 2 options:
Go to Xiaomi Service Center and let them repair it (worth trying/checking out, even if out-of-warranty I think!).
Or, contacting someone who's got an Authorised Xiaomi Account who'd be able to flash the ROM. That's what I did:
I contacted a group on Telegram, got in contact with the moderator. Paid 23€ over PayPal. Needed to wait a few hours for his technician to become available for me. I had to send him TeamViewer session credentials, so he can remote-connect to my PC. He was then available and connected to my PC. I had prepared with the latest MIUI Fastboot ROM and made sure my phone is connected and detected by Windows as a QCOM device. He downloaded some zipped piece of software, opened it, had to move out the TeamViewer session and came back and entered some kind of a Token into that program. He then used Mi Flash (I don't know if *my* Mi Flash, or from his downloaded zip-file), flashed the ROM and it worked.
Actually, during the flash in Mi Flash, my phone disconnected once, which was my fault though. He got a little annoyed, but he flashed it the second time and it worked.
It sounds very sketchy, but it's what I did, and it worked.
Click to expand...
Click to collapse
You didnt have to open your phone and short the pins?
ApexPrime said:
You didnt have to open your phone and short the pins?
Click to expand...
Click to collapse
I did. My phone didn't auto-enter EDL Mode. I've heard that if the Qualcomm SOC detects that the bootloader can't be booted, it automatically alternates to the EDL Mode, which resides on the SOC itself, is read-only, and can't be erased.
Didn't happen for me. My suspicion is that my phone was able to boot into the BL, but couldn't load anything (Fastboot, Recovery, System..), and so it was stuck there instead of in EDL Mode.
I could've bought a Deep Flash Cable, but I didn't. I think I wanted an excuse to open up my phone "What could possibly go wrong?" =)