[ROM][OFFICIAL][gts4lvwifi][11] LineageOS 18.1 - Samsung Galaxy Tab S5e ROMs, Kernels, Recoveries,

[ROM][OFFICIAL][gts4lvwifi][11] LineageOS 18.1 - Samsung Galaxy Tab S5e ROMs, Kernels, Recoveries,

-- bit more friendly stock -> lineage instructions --
1. Unlock the bootloader
- Connect to WiFi network
- Enable OEM Unlock in developer options
- Turn off the tablet
- Boot to download mode manually by plugging in USB and holding all the buttons for few seconds
- Follow instructions on the screen
2. Connect to WiFi network and make sure OEM Unlock in developer options is still checked
3. Flash custom VBMeta image ( https://dl.twrp.me/gts4lvwifi/vbmeta.tar.html ) in Odin ( use AP slot )
4. After flashing VBMeta, boot to stock. It'll likely ask you to wipe data, if so do that
5. Connect to WiFi network and make sure OEM Unlock in developer options is still checked
6. Now you can flash TWRP ( https://dl.twrp.me/gts4lvwifi ) in Odin ( use AP slot once again ), for convenience you can hold volume up while flashing it so that you boot to recovery right after it's flashed
7. Install Lineage × whatever else you need ( gapps, addon-su, ... )
8. Format data
9. Reboot ( make sure to not install TWRP app when TWRP asks you to )
---
Also Odin download for those who can't find it on their own https://build.nethunter.com/samsung-tools/Odin_3.13.1.zip
( sha1sum 1057496afa34bfdf7e77caf0b99207dca77fcb2d )

Builds 20210531+ depend on Android 11 firmware, and thus from now on the recovery will abort the installation if you're still on Android 9 or 10 one.
You can update the firmware by flashing following Odin package: https://github.com/luk1337/gts4lv-fw/releases/tag/T720XXU2DUD7.
After the firmware update you should be able to flash newer builds.

That was fast. You know what i'm sayin

Working good , just SD card exfat bug (TAP to fix) but thx for Android R so fast!

Which gapps you use?

LuK1337 said:
Builds 20200824+ depend on Android 10 firmware, and thus from now on the recovery will abort the installation if you're still on Android 9 one.
You can update the firmware by flashing following Odin package:
- https://androidfilehost.com/?fid=8889791610682890115
AP -> AP_T720XXU1BTF7_CL18864194_QB32199498_REV00_user_low_ship_MULTI_CERT_meta_OS10.tar.md5
BL -> BL_T720XXU1BTF7_CL18864194_QB32199498_REV00_user_low_ship_MULTI_CERT.tar.md5
After the firmware update you should be able to flash newer builds.
Click to expand...
Click to collapse
I have a new tablet running Android 10. I want to double check what I need to do. First I need to enable Dev mode and OEM and then unlock the bootloader, boot and enable wifi but don't create a google or samsung account or install any apps. Just enable Dev mode again. Then boot to download mode and flash vbmeta from AP. Boot to system and if it request a factory reset, do that. Again wifi and dev mode and back to download to flash TWRP. Now I can flash the LOS 18 build.
Question. Does the build include gapps? I don't see a gapps for LOS 18.

First of all, I want to thank you for your great work. Second, I want to ask how to root, because flashing latest Magisk canary leads to download mode and ROM doesn't boot with it
---------- Post added at 01:09 PM ---------- Previous post was at 01:05 PM ----------
4929york said:
I have a new tablet running Android 10. I want to double check what I need to do. First I need to enable Dev mode and OEM and then unlock the bootloader, boot and enable wifi but don't create a google or samsung account or install any apps. Just enable Dev mode again. Then boot to download mode and flash vbmeta from AP. Boot to system and if it request a factory reset, do that. Again wifi and dev mode and back to download to flash TWRP. Now I can flash the LOS 18 build.
Question. Does the build include gapps? I don't see a gapps for LOS 18.
Click to expand...
Click to collapse
apokit said:
Which gapps you use?
Click to expand...
Click to collapse
https://sourceforge.net/projects/nikgapps/files/Releases/NikGapps-R/26-Sep-2020/
I flashed full package and it worked for me. However, before flashing it I edited nikgapps.config inside of the file to change SetupWizard from 1 to 0 to disable it because they say it's buggy.

I cant boot....can you tell me steps you follow

apokit said:
Which gapps you use?
Click to expand...
Click to collapse
https://forum.xda-developers.com/showpost.php?p=83606169&postcount=13

igna.98 said:
First of all, I want to thank you for your great work. Second, I want to ask how to root, because flashing latest Magisk canary leads to download mode and ROM doesn't boot with it
---------- Post added at 01:09 PM ---------- Previous post was at 01:05 PM ----------
https://sourceforge.net/projects/nikgapps/files/Releases/NikGapps-R/26-Sep-2020/
I flashed full package and it worked for me. However, before flashing it I edited nikgapps.config inside of the file to change SetupWizard from 1 to 0 to disable it because they say it's buggy.
Click to expand...
Click to collapse
Got it working. Without setup, I'm having to install my apps one by one but no big deal. Starting from BTFN didn't help. I still had to flash the AP and BL files from post #3.

apokit said:
I cant boot....can you tell me steps you follow
Click to expand...
Click to collapse
I posted the steps I used in Post #7.

darky444 said:
Working good , just SD card exfat bug (TAP to fix) but thx for Android R so fast!
Click to expand...
Click to collapse
I'll release build /w working exfat in few hours.
BTW could you replace that gapps link with the actual source of it? https://forum.xda-developers.com/asus-zenfone-max-pro-m1/development/rom-aosp-10-0-t3964820 is where the zip actually comes from.

Does chrome works good because for me it stucks and force close

apokit said:
Does chrome works good because for me it stucks and force close
Click to expand...
Click to collapse
Chrome is working fine on my tablet.

Did anyone tried to root with magisk canary.....for me it goes to download mode if flash magisk

apokit said:
Did anyone tried to root with magisk canary.....for me it goes to download mode if flash magisk
Click to expand...
Click to collapse
I find this : https://androidfilehost.com/?fid=8889791610682938222
Worked for me

darky444 said:
I find this : https://androidfilehost.com/?fid=8889791610682938222
Worked for me
Click to expand...
Click to collapse
Am I correct in assuming that first you flash magisk and then flash this file? Or do you flash it instead of magisk?

lewmur said:
Am I correct in assuming that first you flash magisk and then flash this file? Or do you flash it instead of magisk?
Click to expand...
Click to collapse
Just flash this file

dirty flash on official 17.1
hi there, i was wondering if it's possible to dirty flash LOS18, over LOS 17.1 (Latest build), without any problems?

Related

[ROM][UNOFFICIAL] LineageOS 17.1 for Nexus 6P (angler)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free, community built, aftermarket firmware distribution of Android 10, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Important Info:
To flash this rom you need TWRP 3.3.1.0 or newer.
Make sure you have the vendor, radio, & bootloader img's installed, from the stock oreo 8.1 OPM7.181205.001 Dec 2018 factory image.
They can be extracted from the factory image on google's site here. Or you can use the ones linked below that I already extracted:
vendor, radio, bootloader img's: https://androidfilehost.com/?w=files&flid=286833
The vendor img is flashable with twrp or fastboot. For the radio and bootloader img, use fastboot.
Instructions:
If updating from an unofficial lineage-17.1 build, follow the steps below:
If you don't already have them installed, flash the newest vendor, radio, and bootloader img's linked above.
Boot into TWRP.
Flash the ROM zip.
Reboot & enjoy.
NOTE: if you previously flashed gapps and/or the su addon, there's no need to flash them again. They will be automatically re-installed during rom zip installation.
If coming from a different ROM:
If you don't already have them installed, flash the newest vendor, radio, and bootloader img's linked above. also make sure you have the newest twrp, linked above.
Boot into TWRP.
Wipe system & data & cache partitions.
Format data.
Flash rom & GApps & su zips (GApps & su zips are optional).
Reboot & enjoy.
For more info or more detailed instructions, visit our wiki here.
Downloads:
Builds:
AndroidFileHost
Google Drive
Reporting Bugs:
DO NOT Report bugs if you're running a custom kernel or you installed Xposed
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues. Any bug not reported in the bug report format below may be ignored.
Code:
What is your--
LineageOS version:
LineageOS Download url:
Gapps version:
Did you--
wipe:
restore with titanium backup:
reboot after having the issue:
Are you using--
a task killer:
a non-stock kernel:
other modifications:
Provide any additional information (observations/frequency of problem/last version it worked on/etc) as needed:
Source Code:
Device Tree
Kernel Tree
Vendor Tree
XDA:DevDB Information
LineageOS 17.1, ROM for the Huawei Nexus 6P
Contributors
PixelBoot
Source Code: https://github.com/LineageOS
ROM OS Version: Android 10
ROM Kernel: Linux 3.10.x
Based On: LineageOS
Version Information
Status: Testing
Created 2019-11-30
Last Updated 2020-08-08

Install Instructions
Grab our recovery from the peripherals section and install it.
Through TWRP Recovery:
Install Zip > Install Image > Choose ‘recovery.img‘ > Select partition ‘Recovery’ > Swipe to confirm flash
Through Fastboot:
Code:
fastboot flash recovery recovery.img
Install the ROM and then wipe your internal data partition.
Through TWRP Recovery:
Wipe > Format data
Through Fastboot:
Code:
fastboot -w
Reboot into system and wait until the process finishes, it could take a little bit. After the installation is done, I suggest waiting before using the phone because it usually goes into thermal throttling after installing a ROM.

Peripherals
FBE Recovery: TWRP
FBE Recovery (4 Core): TWRP
BLOD Patch (4 Core): boot.img

Another android 10 ROM for Angler . And this time it's Lineage 17 which is the best ROM I've used so far . Can't thank you much for your work !

Wow, this is fantastic, thank you @PixelBoot! I'll be upgrading from LOS 15.1 to this, but I'm having trouble locating Gapps for Android 10. Otherwise, I think I'm all set to flash and start testing!

Thank you @PixelBoot for keeping your word. I will flash it soon.
Code:
wrkerr said:
Wow, this is fantastic, thank you @PixelBoot! I'll be upgrading from LOS 15.1 to this, but I'm having trouble locating Gapps for Android 10. Otherwise, I think I'm all set to flash and start testing!
Click to expand...
Click to collapse
OpenGApps Android 10 beta builds are available at:
ARM: https://sourceforge.net/projects/opengapps/files/arm/beta/
ARM64: https://sourceforge.net/projects/opengapps/files/arm64/beta/

??

rom runs smooth , no issues so far

CityHunter004 said:
rom runs smooth , no issues so far
Click to expand...
Click to collapse
Does gcam and GPS work?

sufy1000 said:
Does gcam and GPS work?
Click to expand...
Click to collapse
Also curious.

CityHunter004 said:
rom runs smooth , no issues so far
Click to expand...
Click to collapse
OpenGapps worked for you ? In my case , only BitGapps worked otherwise it goes to bootloader after Google logo .

hk1271 said:
OpenGapps worked for you ? In my case , only BitGapps worked otherwise it goes to bootloader after Google logo .
Click to expand...
Click to collapse
yes open gapps worked
---------- Post added at 10:09 AM ---------- Previous post was at 10:07 AM ----------
sufy1000 said:
Does gcam and GPS work?
Click to expand...
Click to collapse
gcam no
gps yes

CityHunter004 said:
yes open gapps worked
Click to expand...
Click to collapse
Which one you flashed ? Mini ?

face unlock is not present,
battery icon customisation are not working,
and if u are a blod user rom lags a bit
---------- Post added at 10:13 AM ---------- Previous post was at 10:12 AM ----------
hk1271 said:
Which one you flashed ? Mini ?
Click to expand...
Click to collapse
nano

CityHunter004 said:
face unlock is not present,
battery icon customisation are not working,
and if u are a blod user rom lags a bit
---------- Post added at 10:13 AM ---------- Previous post was at 10:12 AM ----------
nano
Click to expand...
Click to collapse
Face unlock has been officially removed in android 10 so that's not a problem . Same with battery percentage not showing . And regarding BLOD , just flash the updated BLOD workaround by osm0sis over the ROM not the 4core boot.img and there will be no lag . And does digital wellbeing and pixel launcher work ?

hk1271 said:
Face unlock has been officially removed in android 10 so that's not a problem . Same with battery percentage not showing . And regarding BLOD , just flash the updated BLOD workaround by osm0sis over the ROM not the 4core boot.img and there will be no lag . And does digital wellbeing and pixel launcher work ?
Click to expand...
Click to collapse
digital wellbeing works bt some times it force stops so u have to clear data , dk about pixel launcher I am using the launcher that came with the rom
---------- Post added at 10:26 AM ---------- Previous post was at 10:24 AM ----------
hk1271 said:
Face unlock has been officially removed in android 10 so that's not a problem . Same with battery percentage not showing . And regarding BLOD , just flash the updated BLOD workaround by osm0sis over the ROM not the 4core boot.img and there will be no lag . And does digital wellbeing and pixel launcher work ?
Click to expand...
Click to collapse
can u send the link for updated blod patch?

CityHunter004 said:
digital wellbeing works bt some times it force stops so u have to clear data , dk about pixel launcher I am using the launcher that came with the rom
---------- Post added at 10:26 AM ---------- Previous post was at 10:24 AM ----------
can u send the link for updated blod patch?
Click to expand...
Click to collapse
https://forum.xda-developers.com/attachment.php?attachmentid=4860505&d=1572410688
Clean flash the ROM then flash this . Peace

Don't flash viper4andrd , it makes camera crash
Expanded desktop option doesn't work

sufy1000 said:
Does gcam and GPS work?
Click to expand...
Click to collapse
Google Camera 6.2.030.244457635 is the last version that will work with our device. Unless you use a modded one.

To offer some early feedback after playing with it for only a few hours, this seems to be working remarkably well. I installed with Open GApps 10 beta pico, and Magisk 20.1.
Battery life actually seems better than it was on LOS 15.1 (Android 8.1), though that could be because I dramatically slimmed down the apps I have installed (from ~150 to ~50). Overall, everything seems very smooth, fast, and efficient. It's a very refreshing experience, since this phone had been getting slower and slower.
I've had a couple apps freeze on launch, but closing and reopening always seems to resolve the issue.
I haven't figured out what GCam I'm going to use yet. I'm probably going to run through several of the suggested apks on Celso Azevedo' Google Camera Ports site until I find one that works reliably.
Visual voicemail in the phone app failed to setup, but that could be an issue with my carrier (T-Mobile). I haven't tried to troubleshoot that yet.
Everything else seems to be working great. Calls, GPS navigation, etc. No major issues.
This is amazing work, @PixelBoot. Thank you so much!

[ROM][UNOFFICIAL][I001D][10] LineageOS 17.1

Thanks

Does this support 120hz and the air triggers?

Wow, many thanks indeed!! However, do you have a list if what's working/not working, bugs and such?

i tried to flash it it does not work i done the full wipes and have latest twrp

Error in flashing and all my data are gone. Tsk!

Has anyone managed to boot yet?

Thank You sir for creating the first rom for our phone. Rom booted successfully and 120hz is working like a charm.
If anyone having issue in installing this rom here are the steps -
1) Extract lineage-17.1-20200319-UNOFFICIAL-I001D.zip in your pc and get payload.bin
2)Download payload dumper for windows extract it and than put payload.bin in payload_input folder
3)Run payload_dumper.exe you will get 5 .img files boot,system,vendor,dtbo,vbmeta
4)Flash all of the .img files using fastboot command and than reboot

BlazingBullets said:
Does this support 120hz and the air triggers?
Click to expand...
Click to collapse
Unfortunately, it does not work

I have been waiting for this! Thanks for the ROM.
Also thanks @Apoorv_87, I followed your instructions to install and it worked.
I have a few questions:
How do I enable 120Hz? I cant seem to find it in the display settings.
Do all LineageOS builds come with GApps pre installed now?

RSpe said:
I have been waiting for this! Thanks for the ROM.
Also thanks @Apoorv_87, I followed your instructions to install and it worked.
I have a few questions:
How do I enable 120Hz? I cant seem to find it in the display settings.
Do all LineageOS builds come with GApps pre installed now?
Click to expand...
Click to collapse
You can activate 120Hz from quick settings, just click on the edit icon and than scroll down the last quick setting is of 120Hz just activate it from there

luca020400 said:
Instructions :
Download the latest build
Flash the latest build
Builds :
https://drive.google.com/open?id=1tA3NBQqmTzToTX38ubxsOqRN9juEtwQv
Click to expand...
Click to collapse
Hay dev, why some here report flash this cusrom not work? Flash like what?
Maybe u should give clear instruction.

We need to install gapps or not ?

Thank you. atleast we have one custom ROM now. i know there's a lot of confusions. Please be patient and be nice to the dev.

Apoorv_87 said:
Thank You sir for creating the first rom for our phone. Rom booted successfully and 120hz is working like a charm.
If anyone having issue in installing this rom here are the steps -
1) Extract lineage-17.1-20200319-UNOFFICIAL-I001D.zip in your pc and get payload.bin
2)Download payload dumper for windows extract it and than put payload.bin in payload_input folder
3)Run payload_dumper.exe you will get 5 .img files boot,system,vendor,dtbo,vbmeta
4)Flash all of the .img files using fastboot command and than reboot
Click to expand...
Click to collapse
everytime i flash system or vendor it says i have a storage limit and fails, there is literally nothing in my sotrage
---------- Post added at 08:10 AM ---------- Previous post was at 07:55 AM ----------
i managed to flash but it skipped the setup proccess and nothing but the home screen works, does anyone know why?
---------- Post added at 08:11 AM ---------- Previous post was at 08:10 AM ----------
i managed to flash but it skipped the setup proccess and nothing but the home screen works, does anyone know why?

Thanks again @luca020400 after a lot of trial and error I managed to also get root (Magisk)

RSpe said:
Thanks again @luca020400 after a lot of trial and error I managed to also get root (Magisk)
Click to expand...
Click to collapse
did you flash through twrp?, and did it skip setup for you aswell?

So here a few tips:
I haven't tested flashing with TWRP, all I know is that it works properly using Lineage Recovery, that is provided within the ROM.
I'll upload it as a standalone image
This build includes Gapps because I'm testing -user builds with verity enabled, so these images are basically my goto for testing CTS.
The current broken things are the vibrator ( will fix soon hopefully ) and air triggers ( probably won't be fixed )
Magisk worked last time I tried flashing it, so it should be fine.
For anyone coming from stock/another rom you have to wipe data _properly_ using the fastboot -w command

Also of course you need to be on the latest Android 10 build by Asus.
If there are some size issues, that might happen on some variants, I based the partition sizes on my device, things may change.

Harley appezzato said:
did you flash through twrp?, and did it skip setup for you aswell?
Click to expand...
Click to collapse
I unpacked the zip, got the boot.img (same as the one linked above) moved it to my phone, pactched it with Magisk, moved it back to my PC then flashed it.
This is the only way I could get it working for me. TWRP would break the ROM and make me have to reinstall.
I still went through setup.

[ROM][UNOFFICIAL][TREBLE][10.0][NB1] LineageOS 17.1

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
LineageOS is a free, community built, aftermarket firmware distribution of Android 10, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
Working:
It boots
WiFi
Bluetooth
Camera
Navigation Keys
Fingerprint
Sensors
GPS
RIL
SDCard
Headphones
Ringtones
Bluetooth audio
Known bugs
WiFi Hotspot
Selinux permissive
Stock LOS recovery doesn't boot
Dual SIM
You tell me
Install instructions
Flash the newest T-Virus release (if you have already installed T-Virus, reflash the newest release it contains a fix to TWRP)
After T-Virus has flashed and it has booted to the Android 10 GSI test environment, type this command to reboot to recovery mode
Code:
adb reboot recovery
Once in recovery, copy the Lineage OS zip file to the internal storage
Go to the Install section and flash the Lineage OS zip
After the zip has flashed, go to Wipe->Advanced Wipe, tick the "Dalvik /ART Cache" and "Data" boxes and wipe them
Head to Wipe->Format Data and type yes to format the data partition
Finally go to the Reboot section, select Slot B to switch to the flashed slot and then to System and swipe to reboot
Profit?
OpenGApps/Magisk:
After the ROM successfully boots up, many of will will want to install Magisk and/or OpenGApps. To do that you need to install the latest TWRP release
Code:
adb reboot bootloader
fastboot flash:raw boot --slot=all twrp-3.4.0-0-NB1.img
fastboot reboot
After that reboot to recovery, flash OpenGApps and/or Magisk. If you flash OpenGApps don't forget to wipe the data partition to prevent Google Setup from crashing
Downloads
T-Virus: https://forum.xda-developers.com/nokia-8/development/t-virus-infect-nokia-8-project-treble-t3946249
ROM: https://github.com/GPUCode/android_device_nokia_nb1/releases
TWRP: https://forum.xda-developers.com/nokia-8/development/recovery-twrp-3-4-0-0-nb1-t4187679
Notes:
Only Clean Installation Please
Bug Report Without logs means nothing
Magisk is untested
In case you flashed any gapps, re-flashing is needed if you're updating the ROM
Reporting Bugs:
DO NOT Report bugs if you installed Xposed or weird magisk modules
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /sys/fs/pstore/console-ramoops and /sys/fs/pstore/dmesg-ramoops-0. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues. Any bug not reported in the bug report format below may be ignored.
Sources:
Device tree (Common): https://github.com/GPUCode/android_device_nokia_msm8998-common/tree/lineage-17.1
Device tree (NB1): https://github.com/GPUCode/android_device_nokia_nb1/tree/lineage-17.1
Kernel: https://github.com/resident-nokia/umbrella
Vendor tree: https://github.com/GPUCode/proprietery_vendor_nokia/tree/lineage-17.1
XDA:DevDB Information
LineageOS 17.1 for NB1, ROM for the Nokia 8
Contributors
THMSP, OneWayGamer, oaid
Source Code: [url]https://github.com/LineageOS[/URL]
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
Based On: AOSP
Version Information
Status: Beta
Created 2020-11-03
Last Updated 2020-11-03[/QUOTE]

Reserved

You gotta be kidding me... @emufan4568
Are you the maintainer? Great work, appreciations.
Should Selinux permissive be considered as BUG? It's a state with its own properties...
Camera is not mentioned to be working or not.

Finally it's here ! Great work :good:
Hopefully I'll be able to use it on a daily basis soon :victory:

Thank for great work sir

Wow great work I knew that you could do it!

How To Install
Help I Cant Install

sdbadshah said:
Help I Cant Install
Click to expand...
Click to collapse
Please go into more detail about the issue you are facing. Just saying "I need help" won't solve anything. Keep in mind this ROM is still beta so expect bugs and crashes

emufan4568 said:
Please go into more detail about the issue you are facing. Just saying "I need help" won't solve anything. Keep in mind this ROM is still beta so expect bugs and crashes
Click to expand...
Click to collapse
The problem with me is i cant understand the method to install iam following the process showed on github but whenever i enter command its says No Such File Dictionary
---------- Post added at 10:09 PM ---------- Previous post was at 09:59 PM ----------
emufan4568 said:
Please go into more detail about the issue you are facing. Just saying "I need help" won't solve anything. Keep in mind this ROM is still beta so expect bugs and crashes
Click to expand...
Click to collapse
And Also My Device Is stucked Into Fastboot mode because i have entered this comand fastboot erase boot_a
after this command iam entering fastboot flash:raw boot_a /path/to/boot.img
but its giving error
---------- Post added at 10:26 PM ---------- Previous post was at 10:09 PM ----------
Now Need Some Help To Install Twrp For Gapps

sdbadshah said:
The problem with me is i cant understand the method to install iam following the process showed on github but whenever i enter command its says No Such File Dictionary
---------- Post added at 10:09 PM ---------- Previous post was at 09:59 PM ----------
And Also My Device Is stucked Into Fastboot mode because i have entered this comand fastboot erase boot_a
after this command iam entering fastboot flash:raw boot_a /path/to/boot.img
but its giving error
---------- Post added at 10:26 PM ---------- Previous post was at 10:09 PM ----------
Now Need Some Help To Install Twrp For Gapps
Click to expand...
Click to collapse
You have to replace "/path/to/boot.img" with the path of the file on your computer... If your prompt is already in the same folder than your files are then just put the filename and it should be ok...
Actually I'm not sure if you should install this ROM as you don't really sound familiar with command prompt, you'd better wait for a stable release as it's just intended for testing.

Bgirka13 said:
You have to replace "/path/to/boot.img" with the path of the file on your computer... If your prompt is already in the same folder than your files are then just put the filename and it should be ok...
Actually I'm not sure if you should install this ROM as you don't really sound familiar with command prompt, you'd better wait for a stable release as it's just intended for testing.
Click to expand...
Click to collapse
Yup iam New Into It But I hAve installed Succecfully But Now What about gapps,How Can I Install Twrp,I Have tried to boot into twrp without Installing But Its Stuck On Powered By Andriod

sdbadshah said:
Yup iam New Into It But I hAve installed Succecfully But Now What about gapps,How Can I Install Twrp,I Have tried to boot into twrp without Installing But Its Stuck On Powered By Andriod
Click to expand...
Click to collapse
The boot command does not work for the Nokia 8. You have to flash T-virus TWRP, then flash OpenGApps, reboot to download mode again and then type "fastboot format userdata" to prevent the Google Setup from crashing. Please read the whole thread before asking any questions

So... I used the rom for a few hours, played with settings, captured some videos and pictures, etc. Controls over buttons amazed me. Camera was good (I didn't have access to pc to compare in detail, but lower volume of photos was apparent, it could be because of higher compression or else), better than stock (except for interface!). Long story short, I came back to stock just for one thing, the ringtones. It looked like that there is some problem with their properties which is preventing usability. Rest is pure awesome.
P.S. (about stock packages) offline ota updates provided by @THMSP (specifically 488L for 488K!) don't seem to work. Also 5.15x firmwares (above 5.150) have problems in their system image file. Their offline updates don't seem to work either.

emufan4568 said:
The boot command does not work for the Nokia 8. You have to flash T-virus TWRP, then flash OpenGApps, reboot to download mode again and then type "fastboot format userdata" to prevent the Google Setup from crashing. Please read the whole thread before asking any questions
Click to expand...
Click to collapse
what's fastboot command to install TWRP, I don't know how to install it.

dongvatm said:
what's fastboot command to install TWRP, I don't know how to install it.
Click to expand...
Click to collapse
You need to use the :raw tag with flash. Running fastboot flash:raw boot_a twrp_treble.img work for me

Arashone said:
So... I used the rom for a few hours, played with settings, captured some videos and pictures, etc. Controls over buttons amazed me. Camera was good (I didn't have access to pc to compare in detail, but lower volume of photos was apparent, it could be because of higher compression or else), better than stock (except for interface!). Long story short, I came back to stock just for one thing, the ringtones. It looked like that there is some problem with their properties which is preventing usability. Rest is pure awesome.
P.S. (about stock packages) offline ota updates provided by @THMSP (specifically 488L for 488K!) don't seem to work. Also 5.15x firmwares (above 5.150) have problems in their system image file. Their offline updates don't seem to work either.
Click to expand...
Click to collapse
Ringtones, Headphones and NFC have been fixed. New build will be up soon

Awesome work man! I have a suggestion, make a modified T-virus with LineageOS bundled with it. I'll start working on AIO 2.0 for Treble soon

Suggestion: Use Google Drive to upload rom files. Github is painstakingly slow af for me, while others work just fine. Please do something about that

My wifi will not work, installed following instructions works fine except for wifi. Phone is TA-1012

New release is up! Download from here: https://github.com/GPUCode/android_device_nokia_nb1/releases/tag/v1.1 Fixes include:
* Headphones
* Ringtones
* Bluetooth audio
* NFC
Now the release comes with a TWRP flashable package. The thread has been updated with new installation instructions

[ROM][UNOFFICIAL][12]LineageOS 19.1 for Galaxy S20/S20+/S20 Ultra Exynos

Requirements:
S based firmware (OneUI4)
Pre-Install Instructions
Warning: The following instructions will unlock the bootloader and wipe all userdata on the device.
Connect the device to a Wi-Fi network.
Enable Developer Options by pressing the “Build Number” option in the “Settings” app within the “About” menu
From within the Developer options menu, enable OEM unlock.
Power off the device, and boot it into download mode:
With the device powered off, hold Volume Down + Volume Up and connect USB cable to PC.
Now, click the button that the onscren instructions coorelate to “Continue” and/or “Unlock Bootloader”.
Your device will reboot, you may now unplug the USB cable from your device.
The device will demand you format userdata, please follow the onscreen instructions to do so.
Run through Android Setup skipping everything you can, then connect the device to a Wi-Fi network.
Re-enable Development settings by clicking the “Build Number” option 10 times, in the “Settings” app within the “About” menu, and verify that “OEM Unlock” is still enabled in the “Developer options” menu.
Installing LineageOS for the first time
Flash lineage recovery
Only the provided lineage recovery will be supported,
using TWRP might result in a possible data loss!!
If using Odin rename the lineage recovery image for your model to recovery.img and add it to a .tar archive using e.g 7zip.
If using Heimdall use: heimdall flash --RECOVERY recovery.img --no-reboot
Boot lineage recovery
IMPORTANT: Do not boot into system again before booting recovery, or system will restore stock recovery!
If using Odin untick auto-reboot before flashing.
After flashing reboot by pressing Volume Down and Power for approximately 7 seconds,
immediately hold Volume Up and Power to boot recovery
IMPORTANT: As of OneUI 3 your device needs to be connected to a PC via USB cable in order to be able to
boot recovery via Volume Up and Power.
Factory reset using Factory reset -> Format data/factory reset
Warning: Unlike TWRP this will also erase internal storage!
Sideload LineageOS by enabling sideload via Apply Update -> Apply from ADB
Then run adb sideload <path to your lineage.zip> on your PC
Optional:
Sideload GApps and magisk by repeating above step
with their zip/apk

Known issues:
VoLTE/VoWiFi
Google maps
Firmware upgrade instructions:
Get the latest firmware for your device here
Follow the provided instruction for flashing with Heimdall

Gonna try this out later. Nice!

Looks awesome!

NOTE: z3s (Galaxy s20 ultra) and y2s (galaxy s20 plus) builds are still uploading, hold tight

Nice ! Thank you so much for the great work and effort put into this
Two questions:
1. Is 5G working as it is not anymore in the "known issues" section ?
2. When using the latest S firmware is a dirty flash from LOS 18.1 possible ?
Cheers !

flunkyball said:
Nice ! Thank you so much for the great work and effort put into this
Two questions:
1. Is 5G working as it is not anymore in the "known issues" section ?
2. When using the latest S firmware is a dirty flash from LOS 18.1 possible ?
Cheers !
Click to expand...
Click to collapse
I am not sure about 5G as i only have a 4G device. Otherwise the devices are same
about 2. Dirty flashing could Theoretically work but i really cannot guarantee it. You can always try updating only the firmware for your device by going here https://github.com/Linux4/firmware-update/releases and finding your device and flashing everything with heimdall with the provided command, then try dirty flashing without wiping.

All three builds are uploaded now, enjoy!

Exelent ROM for people like me that dislike oneui and all its bloatware. Beside that this rom work so mutch better then the current oneui4 that feels slow and sluggish compared with los12.
Thanks Sent from my Nokia 3310 exynos 5g

Do anyone use lineageos rom to eyestrain but rom one ui not eyestrain ?

Impressive! Fingerprint scaner is working better then stock OneUI. Thank you!

DeHuMaNiZeD said:
Known issues:
High refresh rate
VoLTE/VoWiFi
Firmware upgrade instructions:
Get the latest firmware for your device here
Follow the provided instruction for flashing with Heimdall
Click to expand...
Click to collapse
In your personal opinion, will we ever see 120Hz working on Los for S20?

Prosafe said:
Exelent ROM for people like me that dislike oneui and all its bloatware. Beside that this rom work so mutch better then the current oneui4 that feels slow and sluggish compared with los12.
Thanks Sent from my Nokia 3310 exynos 5g
Click to expand...
Click to collapse
how about camera? quality is good? gcam compatible?

Darkstriker said:
In your personal opinion, will we ever see 120Hz working on Los for S20?
Click to expand...
Click to collapse
I cannot say.

I can confirm that 5G is NOT working on the ROM

Also, VOLTE, VOWIFI, and Google assistant responding to my voice, are all broken

Can I get the lineage os 19 rom. It says I need authorization

DeHuMaNiZeD said:
Firmware upgrade instructions:
Get the latest firmware for your device here
Follow the provided instruction for flashing with Heimdall
Click to expand...
Click to collapse
Thanks again to the team for your work.
I'm on G980FXXSCDUJ5 (S20 4G - x1s).
I was trying to upgrade to latest firmware G980FXXSCEUL9 before to load your 'lineage-19.0-20220111-UNOFFICIAL-x1s' but I have a problem.
According to me, two firmwares on your GitHub link are not corresponding to their designation:
-firmware-SM-G980F-G980FXXSCEUL9
-firmware-SM-G980F-G980FXXSCEUL7
(after download, sha256 hash controls are ok)
I've flashed these firmwares and the result for both is:
-G980FXXUCEUL6
-bootloader relocked
-On Download Mode screen, additional Japanese texts appear
I loaded back G980FXXSCDUJ5 from my datas.
Can you have a look ?
Thanks

seujo said:
Thanks again to the team for your work.
I'm on G980FXXSCDUJ5 (S20 4G - x1s).
I was trying to upgrade to latest firmware G980FXXSCEUL9 before to load your 'lineage-19.0-20220111-UNOFFICIAL-x1s' but I have a problem.
According to me, two firmwares on your GitHub link are not corresponding to their designation:
-firmware-SM-G980F-G980FXXSCEUL9
-firmware-SM-G980F-G980FXXSCEUL7
(after download, sha256 hash controls are ok)
I've flashed these firmwares and the result for both is:
-G980FXXUCEUL6
-bootloader relocked
-On Download Mode screen, additional Japanese texts appear
View attachment 5519777
I loaded back G980FXXSCDUJ5 from my datas.
Can you have a look ?
Thanks
Click to expand...
Click to collapse
Baseband version does not correspond to firmware upgrades. That means it doesnt need to be same as the firmware you flashed

[ROM][UNOFFICIAL][13.0][OTA][Signature Spoofing][Open Source][Encryption] LineageOS 20 for Galaxy S10e/S10/S10+/S10 5G Exynos

Pre-Install Instructions
Warning: The following instructions will unlock the bootloader and wipe all userdata on the device.
Connect the device to a Wi-Fi network.
Enable Developer Options by pressing the “Build Number” option in the “Settings” app within the “About” menu
From within the Developer options menu, enable OEM unlock.
Power off the device, and boot it into download mode:
With the device powered off, hold Volume Down + Bixby and connect USB cable to PC.
Now, click the button that the onscren instructions coorelate to “Continue” and/or “Unlock Bootloader”.
Your device will reboot, you may now unplug the USB cable from your device.
The device will demand you format userdata, please follow the onscreen instructions to do so.
Run through Android Setup skipping everything you can, then connect the device to a Wi-Fi network.
Re-enable Development settings by clicking the “Build Number” option 10 times, in the “Settings” app within the “About” menu, and verify that “OEM Unlock” is still enabled in the “Developer options” menu.
Installing LineageOS for the first time
Flash lineage recovery
Only the provided lineage recovery will be supported,
using TWRP might result in a possible data loss!!
If using Odin rename the lineage recovery image for your model to recovery.img and add it to a .tar archive using e.g 7zip.
If using Heimdall use: heimdall flash --RECOVERY recovery.img --no-reboot
Boot lineage recovery
IMPORTANT: Do not boot into system again before booting recovery, or system will restore stock recovery!
If using Odin untick auto-reboot before flashing.
After flashing reboot by pressing Volume Down and Power for approximately 7 seconds,
immediately hold Volume Up, Bixby and Power to boot recovery
IMPORTANT: As of OneUI 3 your device needs to be connected to a PC via USB cable in order to be able to
boot recovery via Volume Up, Bixby and Power.
Factory reset using Factory reset -> Format data/factory reset
Warning: Unlike TWRP this will also erase internal storage!
Sideload LineageOS by enabling sideload via Apply Update -> Apply from ADB
Then run adb sideload <path to your lineage.zip> on your PC
Optional:
Sideload GApps and Lygisk by repeating above step
with their zip/apk
Magisk
As this ROM has a working ramdisk sideloading the magisk apk is enough, just as it is
on every other device, no bootimage with magisk included or installing to recovery is needed!
I also strongly recommend to use Lygisk instead,
which is a fork of Magisk that aims to improve support for devices with FBE that can't (and shouldn't anyways!) decrypt userdata in recovery,
this will also fix OTAs getting stuck while having installed Magisk.

Features
SELinux enforcing
AES-256-XTS FBE encryption
All cameras are working
Ramdisk is working
Known issues
VoLTE/VoWiFi
You tell me
Likely more

My English is not very good, so I don't understand some things. My phone is Samsung Galaxy S10 (SM-G973F), Android 12, (HVG4). The bootloader is unlocked. I am confused by these instructions, and I would like to try this.

ZmisiS said:
My English is not very good, so I don't understand some things. My phone is Samsung Galaxy S10 (SM-G973F), Android 12, (HVG4). The bootloader is unlocked. I am confused by these instructions, and I would like to try this.
Click to expand...
Click to collapse
maybe to write what you don't understand

I don't understand:
Any Q, R or S based firmware installed on your device.
Flash lineage recovery (Get from here)
If using Odin rename the lineage recovery image for your model to recovery.img and add it to a .tar archive using e.g 7zip.
Sideload LineageOS by enabling sideload via Apply Update -> Apply from ADB
Then run adb sideload <path to your lineage.zip> on your PC
I also strongly recommend to use Lygisk instead,
which is a fork of Magisk that aims to improve support for devices with FBE that can't (and shouldn't anyways!) decrypt userdata in recovery,

where i can find gapps 13 android?

kolyan2282 said:
where i can find gapps 13 android?
Click to expand...
Click to collapse
Google apps | LineageOS Wiki
wiki.lineageos.org

Thanks so much for working on our device, so exited to see this new version on Android on the s10, I will wait though for it to get more mature.

DOGASP said:
Google apps | LineageOS Wiki
wiki.lineageos.org
Click to expand...
Click to collapse
Thanks... Should I try the one for Lineage 19? Ie (12L)?

Can few screenshots of the interface of this android?

ZmisiS said:
Can few screenshots of the interface of this android?
Click to expand...
Click to collapse
It looks mostly the same as AOSP Android 12-based ROMs.

ThePS4Gamer said:
It looks mostly the same as AOSP Android 12-based ROMs.
Click to expand...
Click to collapse
I never had AOSP installed, and I couldn't get to the images.

Has anyone installed this ROM? If it is, please write something about it for those of us who intend to install it. I hope that's not a problem?

I installed this and I need some samsung apps as well as google apps. I installed Gaaps 12.1. I don't have Google Play Store.

good morning, yes.

I reverted to stock ROM.

ZmisiS said:
I installed this and I need some samsung apps as well as google apps. I installed Gaaps 12.1. I don't have Google Play Store.
Click to expand...
Click to collapse
you can't install gaaps A12.1 on OS Android 13, i.e. you can, but it won't work, you need gaaps 13

ZmisiS said:
I installed this and I need some samsung apps as well as google apps. I installed Gaaps 12.1. I don't have Google Play Store.
Click to expand...
Click to collapse
unfortunately, you cannot have both on the AOSP system, you install gaaps for Google services, and you cannot run Samsung applications on AOSP or a pure Android system

@Linux4 will it work on G977N ?

Develop Bugs

welcome