Related
hello guys I'm trying to Mokee official 7.1.1, if you want to try this is the link.
https://download.mokeedev.com/?device=zl1
More info about this firmware would be nice.
Infrared port is not working.
You can put the exposed form
intrisaconlecotiche said:
Infrared port is not working.
You can put the exposed form
Click to expand...
Click to collapse
And all the other stuff?
venezolano69 said:
And all the other stuff?
Click to expand...
Click to collapse
I did not find anything strange is good enough.
you need to use it at least one day
if it could operate infrared would be ok
intrisaconlecotiche said:
I did not find anything strange is good enough.
you need to use it at least one day
if it could operate infrared would be ok
Click to expand...
Click to collapse
Thanx I'll try it, I don't need ifrared
hyper_davide said:
hello guys I'm trying to Mokee official 7.1.1, if you want to try this is the link.
I think Mokee already merged 7.1.2. In any case, it's great to have another Nougat ROM for the Pro 3.
Click to expand...
Click to collapse
I'm running mokee right now and I don't find any bug, just the audiofx like every nougat rom
venezolano69 said:
I'm running mokee right now and I don't find any bug, just the audiofx like every nougat rom
Click to expand...
Click to collapse
Are you on X720 or X727?
xiton said:
Are you on X720 or X727?
Click to expand...
Click to collapse
X720
venezolano69 said:
X720
Click to expand...
Click to collapse
And in the customization question, does it compare with RR?
zapinho said:
And in the customization question, does it compare with RR?
Click to expand...
Click to collapse
Not at all it's just for trying something else
The rom is sluggish in term of performance or is it just me?
Sent from my LEX720 using Tapatalk
MoKee updated to 7.1.2
Any notable bugs?
How good is camera app compared to default ROM?
How is battery? With default ROM is good but with superluminal and official lineage is bad to worse.
I'm on mokee 7.1.2-zl1-201705030125-NIGHTLY and everything's really smooth including gaming performance.
I got an issue in gallery, when marking pictures I always have to hold each picture to mark them. Normally in google photos/quickpic I only need to hold at first selection and tap the other pictures for selection.
It also shares the same bug with other rom. Reboot on first fp scan and black screen/freeze when trying to share directly to Twitter from some games which is not happening on stock EUI.
All in all this rom deserves more attention. It is way different than the earlier build of Mokee. This is one of the best for our LePro3 ??
Sent from my LEX720 using Tapatalk
Beibybul said:
I'm on mokee 7.1.2-zl1-201705030125-NIGHTLY and everything's really smooth including gaming performance.
I got an issue in gallery, when marking pictures I always have to hold each picture to mark them. Normally in google photos/quickpic I only need to hold at first selection and tap the other pictures for selection.
It also shares the same bug with other rom. Reboot on first fp scan and black screen/freeze when trying to share directly to Twitter from some games which is not happening on stock EUI.
All in all this rom deserves more attention. It is way different than the earlier build of Mokee. This is one of the best for our LePro3
Sent from my LEX720 using Tapatalk
Click to expand...
Click to collapse
My friend, how's the camera and battery? Does the dolby atmos audio work?
Thank you.
eualex said:
My friend, how's the camera and battery? Does the dolby atmos audio work?
Thank you.
Click to expand...
Click to collapse
Camera crash when I set the resolution to 11.9MP/16:9 using built-in camera. But I dont find any bug using Footej Camera from google play store, camera and video recording works great as it should.
I can install dolby atmos successfully using dolby 2.4 by ahrion. But I dont notice the difference in sound quality after activating and tweaking the equalizer.
Sent from my LEX720 using Tapatalk
Beibybul said:
Camera crash when I set the resolution to 11.9MP/16:9 using built-in camera. But I dont find any bug using Footej Camera from google play store, camera and video recording works great as it should.
I can install dolby atmos successfully using dolby 2.4 by ahrion. But I dont notice the difference in sound quality after activating and tweaking the equalizer.
Click to expand...
Click to collapse
You have to disable the system equalizer to hear the difference
venezolano69 said:
You have to disable the system equalizer to hear the difference
Click to expand...
Click to collapse
I have disabled it and still no difference. Or it could be Poweramp (which I use to test) utilizes its internal sound processing hence dolby atmos isn't effective. I'll test it more and report the result.
Sent from my LEX720 using Tapatalk
After multiple gcam apks, and modules. I finally found a working APK for telephoto lens. I am on AEX btw.
So, first you need this magisk module by @fu24 :
https://forum.xda-developers.com/mi...od-switchable-telephoto-t3859831/post78396818
*Note The newer module by @fu24 breaks night sight, so this version recommended
Then install one of these APKs by
@fu24 Pixel 3 Mod : https://f.celsoazevedo.com/file/cfiles/gcm1/MGC_6.1.021_MI8_V2e-fu24_Aux2way_4Lens-03g-dual.apk (working Night Sight) (front cam still has green tint)
Thanks to
@fu24 for the magisk module and APK
@adnbwta for mentioning a Pixel 3 Mod
Created : 23/2/19
Updated : 20/6/19
Unfortunatly this does not work on stock rom
corvonero said:
Unfortunatly this does not work on stock rom
Click to expand...
Click to collapse
Thanks for the feedback mate
Works with Pixel Experience ROM.
Thanks for the Post.
WhatzIt2Ya said:
Thanks for the feedback mate
Click to expand...
Click to collapse
There's a few version by fu24 and cstark that based on gcam 6 which uses the auxiliary lens?
adnbwta said:
There's a few version by fu24 and cstark that based on gcam 6 which uses the auxiliary lens?
Click to expand...
Click to collapse
I've tried many and none of them work. This is the best I could find. I've spent many hours trying to look for a working one.
WhatzIt2Ya said:
I've tried many and none of them work. This is the best I could find. I've spent many hours trying to look for a working one.
Click to expand...
Click to collapse
This should work
https://f.celsoazevedo.com/file/gcamera/MGC_6.1.021_MI8_V1d_fu24-01g.apk
adnbwta said:
This should work
https://f.celsoazevedo.com/file/gcamera/MGC_6.1.021_MI8_V1d_fu24-01g.apk
Click to expand...
Click to collapse
Not working, changed many settings, no option for aux
WhatzIt2Ya said:
Not working, changed many settings, no option for aux
Click to expand...
Click to collapse
Working for me with the same fu24's cam patch
adnbwta said:
Working for me with the same fu24's cam patch
Click to expand...
Click to collapse
Weird it doesnt work me, no auxiliary option at all.
WhatzIt2Ya said:
Weird it doesnt work me, no auxiliary option at all.
Click to expand...
Click to collapse
No disrespect, but to switch between lenses, hold the switch button beside the shutter ?
adnbwta said:
No disrespect, but to switch between lenses, hold the switch button beside the shutter ?
Click to expand...
Click to collapse
Huh, I never knew that you switch it like that. Yes, it works, but I notice that the pictures are a bit darker and grainier than pixel 2 mods. So I would stick with the pixel 2 mod.
WhatzIt2Ya said:
Huh, I never knew that you switch it like that. Yes, it works, but I notice that the pictures are a bit darker and grainier than pixel 2 mods. So I would stick with the pixel 2 mod.
Click to expand...
Click to collapse
Did you also install tissot cam patch by nhappyman n joey huab?
For comparison, this was taken from gcam 5, tele and wide
And this was from gcam 6, normal and night sight, tele and wide.
adnbwta said:
Did you also install tissot cam patch by nhappyman n joey huab?
Click to expand...
Click to collapse
Ive tried it before, it just causes issues for me.
What about the stock ROM? Tried several magisk modules but none of them worked
emiljano539 said:
What about the stock ROM? Tried several magisk modules but none of them worked
Click to expand...
Click to collapse
Unfortunately, theres nothing for stock rom that'll work.
World's perfectly here. Los 16
Do I have to set back camera to 9MPX in order to get Autofocus to work on Pie Havoc 2.2 latest version with Moun Kernel on latest firmware ?
Preinstalled camera version is: Pixel2Mod-Arnova8G2
Thank you.
Well I'm asking of it's possible to create a pie room from the Moto Z3 for our zforce2 since hardware is somewhat very similar. Has this been done with success?
I once flashed a HTC butterfly three with a raw HTC M9 ROM with some success (camera didn't work.)
Durteedee said:
Well I'm asking of it's possible to create a pie room from the Moto Z3 for our zforce2 since hardware is somewhat very similar. Has this been done with success?
I once flashed a HTC butterfly three with a raw HTC M9 ROM with some success (camera didn't work.)
Click to expand...
Click to collapse
No port necessary, we have pie roms, for awhile now. Check out Lineage and Dirty Unicorn. Z2 Force aka nash.
Well do thoes ROMs have the Moto apps things I use dayliy like chop for flashlight and the like, I also assume ball the mods still work right?
41rw4lk said:
No port necessary, we have pie roms, for awhile now. Check out Lineage and Dirty Unicorn. Z2 Force aka nash.
Click to expand...
Click to collapse
The main thing, for me as well, is support for Motorola Moto Mods and the Moto gestures. Which neither los not dirty unicorn support iirc
KOAO said:
The main thing, for me as well, is support for Motorola Moto Mods and the Moto gestures. Which neither los not dirty unicorn support iirc
Click to expand...
Click to collapse
Mods work. Only ones that don't are audio routing mods (gamepad audio jack doesn't work, but pad works and the speakers) and the camera mod. Others work fine.
Edit: flaahlight chop works fine. Other gestures don't. FP nav works on los
41rw4lk said:
No port necessary, we have pie roms, for awhile now. Check out Lineage and Dirty Unicorn. Z2 Force aka nash.
Click to expand...
Click to collapse
Uzephi said:
Mods work. Only ones that don't are audio routing mods (gamepad audio jack doesn't work, but pad works and the speakers) and the camera mod. Others work fine.
Click to expand...
Click to collapse
So the JBL Audio ones don't work? That is a slight bummer, is there any chance they are working to have it work in the future?
So the projector and turbo power pack (the two mods I use frequently) work?
KOAO said:
So the JBL Audio ones don't work? That is a slight bummer, is there any chance they are working to have it work in the future?
So the projector and turbo power pack (the two mods I use frequently) work?
Click to expand...
Click to collapse
Audio routing is dependant on vendor blobs for P. When P releases there is a chance audio routing would be fixed.
Yes, projector and battery packs work.
So the question of the porting of the z3 ROM is that a possible thing?
Durteedee said:
So the question of the porting of the z3 ROM is that a possible thing?
Click to expand...
Click to collapse
No. They have a different partition map, one uses treble, one doesn't (officially), they have different modem version, different greybus revisions, etc.
There's a reason we don't use Z3 blobs on nash.
Thanks man
npjohnson said:
No. They have a different partition map, one uses treble, one doesn't (officially), they have different modem version, different greybus revisions, etc.
There's a reason we don't use Z3 blobs on nash.
Click to expand...
Click to collapse
if the z3 is running treble shouldnt we be able to flash the z3 system.img if we are already on unofficial treble?
mattlowry said:
if the z3 is running treble shouldnt we be able to flash the z3 system.img if we are already on unofficial treble?
Click to expand...
Click to collapse
That's not quite how that works. It would need edits. If you ran it though Erfanoabdi's GSI scripts probably, but the Moto features wouldn't work as the Blobs are all wrong, neither would mods, etc.
I'm bumping this with a new question, now that there is an official pie ROM can that be stripped of Verizon yuck and user on other North America models?
So, to the point, how good is the UNOFFICIAL Evox for Poco F3?
For those who don't know, there is a Russian build in a russian forum.
MOD EDIT: Link Removed
Everything is in russian, ofc
Oxnap said:
So, to the point, how good is the UNOFFICIAL Evox for Poco F3?
For those who don't know, there is a Russian build in a russian forum.
MOD EDIT: Link Removed
Everything is in russian, ofc
Click to expand...
Click to collapse
POCO-F3 - Google Drive
drive.google.com
I doubt it's very stable... Not even an XDA thread. Don't know if this phone will receive good support... Which is sad, cause mine arrives tomorrow morning. I had hoped for good custom ROM support, but that doesn't seem to be the case
Oxnap said:
So, to the point, how good is the UNOFFICIAL Evox for Poco F3?
For those who don't know, there is a Russian build in a russian forum.
MOD EDIT: Link Removed
Everything is in russian, ofc
Click to expand...
Click to collapse
DarkAngelGR may be working on EvolutionX
JustAnAverageGuy_19 said:
I doubt it's very stable... Not even an XDA thread. Don't know if this phone will receive good support... Which is sad, cause mine arrives tomorrow morning. I had hoped for good custom ROM support, but that doesn't seem to be the case
Click to expand...
Click to collapse
There are a fair few devs working on the device. There are device trees so any custom ROM can be built and MIUI customised ROMs are also being released. On top of this there are two superb devs currently working on dynamic a/b partitions to make TWRP stable. This is difficult as there is a lot of guesswork involved as the phone was released with Android 11 and so the partition setup is quite unknown
Robert314 said:
DarkAngelGR may be working on EvolutionX
Click to expand...
Click to collapse
Is it going to be an Official release?
Oxnap said:
Is it going to be an Official release?
Click to expand...
Click to collapse
That's the Devs choice (I don't know)
Robert314 said:
That's the Devs choice (I don't know)
Click to expand...
Click to collapse
Well, we have to wait until it releases. Meanwhile, have you tried the russian version?
JustAnAverageGuy_19 said:
Don't know if this phone will receive good support... Which is sad, cause mine arrives tomorrow morning. I had hoped for good custom ROM support, but that doesn't seem to be the case
Click to expand...
Click to collapse
Hmm, yeahhh, cos there's only around 15-20 ROMs, a couple of kernels and a couple of twrps, plus whatever else is in the pipeline... how many more do you want? lol
I just installed the version from the Gdrive above and so far its great. So many customizations and no hiccups yet.
Will edit if anything changes.
one problem is that why he wrote offical even though its unofficial rom
Robert314 said:
DarkAngelGR may be working on EvolutionX
Click to expand...
Click to collapse
does he has the device?
Robert314 said:
There are a fair few devs working on the device. There are device trees so any custom ROM can be built and MIUI customised ROMs are also being released. On top of this there are two superb devs currently working on dynamic a/b partitions to make TWRP stable. This is difficult as there is a lot of guesswork involved as the phone was released with Android 11 and so the partition setup is quite unknown
Click to expand...
Click to collapse
That's great news! Has xiaomi released the kernel sources completely?
rageyoudown said:
I just installed the version from the Gdrive above and so far its great. So many customizations and no hiccups yet.
Will edit if anything changes.
Click to expand...
Click to collapse
how's the battery bakup at 120hz? Are magisk and accompanying mods installable?
pranavrocksharma said:
one problem is that why he wrote offical even though its unofficial rom
Click to expand...
Click to collapse
Where does he say is OFFICIAL?
JustAnAverageGuy_19 said:
how's the battery bakup at 120hz? Are magisk and accompanying mods installable?
Click to expand...
Click to collapse
Battery life is great, I can use the phone actively without noticing the battery depleting. System resources minimal if as long you don't use bloated apps. I have magisk installed with things like energized protection, viper4android and more working fine. Even apps like bluemail work on this ROM while on others I had no luck.
rageyoudown said:
Battery life is great, I can use the phone actively without noticing the battery depleting. System resources minimal if as long you don't use bloated apps. I have magisk installed with things like energized protection, viper4android and more working fine. Even apps like bluemail work on this ROM while on others I had no luck.
Click to expand...
Click to collapse
Are you using AOD or dt2w, or pocket detection?
Oxnap said:
Are you using AOD or dt2w, or pocket detection?
Click to expand...
Click to collapse
Double tap 2 wake works out of the box and I am using pocket detection. I don't use AOD cause it's a battery killer.
rageyoudown said:
Double tap 2 wake works out of the box and I am using pocket detection. I don't use AOD cause it's a battery killer.
Click to expand...
Click to collapse
And the pocket detection isn't a battery killer too? In other ROMS I've tried I had to disable this for the battery consumption
Oxnap said:
And the pocket detection isn't a battery killer too? In other ROMS I've tried I had to disable this for the battery consumption
Click to expand...
Click to collapse
It doesn't appear to be but I understand your point. It would take some benchmarking to be sure.
hi everyone, I'm here to share my absolutely positive experience with Resurrection Remix Q compiled by @RobotHanzo, it's just (almost) perfect for me.
After a week of test, i can say: everything works properly.
~Ril
~Data
~GPS (perfectly, setting "only device")
~fingerprint sensor (even after each reboot), very quick response
~NFC
~face unlock
~LTE + (plus) is working (at least the indicator)
~perfect functionality of double SIM implementation
~incredibly there's a gcam reasonably working (only on perfect brightness condition, only back camera of course):
MGC_8.3.252_V0e_Arnova_V5.apk.
*the shot is more fast Of The stock installed android.camera2.
Just 2 little (for me) bugs:
A) a single SIM is not disabling.
B) the level on SIM indicator is stating at low value.
Rarely in my experience I've found a cusRom (even specifically, officially dedicated) more stable of this so, after a week of test my impressions is absolutely amazing, no lags, no app crashes, no reboot, at all!
Resurrection Remix Q GSI - Browse /old/20210831(8.7.2) at SourceForge.net
Resurrection Remix Q GSI - Browse /old/20210831(8.7.2) at SourceForge.net
The download site of Resurrection Remix Q GSI
sourceforge.net
Gcam:
BSG: MGC_8.3.252_V0e_Arnova_V5
BSG: MGC_8.3.252_V0e_Arnova_V5
Download MGC_8.3.252_V0e_Arnova_V5 by BSG.
www.celsoazevedo.com
Thanks for this very accurate work to @RobotHanzo
Sorry for my poor English.
autokoise said:
incredibly there's a gcam reasonably working (only on perfect brightness condition, only back camera of course):
MGC_8.3.252_V0e_Arnova_V5.apk.
*the shot is more fast Of The stock installed android.camera2.
Click to expand...
Click to collapse
and what about the photo quality?
Imo the best camera for Hua devices under GSI ROMs is Footej Camera2-Premium. If you want to try it, click here .
-Alf- said:
and what about the photo quality?
Imo the best camera for Hua devices under GSI ROMs is Footej Camera2-Premium. If you want to try it, click here .
Click to expand...
Click to collapse
On good light conditions, during daylight especially, the results Of The main camera (back camera only) only in HDR+ (killer feature of gCam), is reasonably better!
In low light conditions there are heavy problems of incorrect saturation:
On the left an example of stock (custom Rom) camera, on the right the gcam Cam I've found reasonably working.
-Alf- said:
and what about the photo quality?
Imo the best camera for Hua devices under GSI ROMs is Footej Camera2-Premium. If you want to try it, click here .
Click to expand...
Click to collapse
now I'm gonna try footej you suggest, thanks!
-Alf- said:
and what about the photo quality?
Imo the best camera for Hua devices under GSI ROMs is Footej Camera2-Premium. If you want to try it, click here .
Click to expand...
Click to collapse
Footej is absolutely better of stock camera present by default on custom rom ( com.android.camera2), just in terms of smoothness and quick response when you launch the app, the quality of picture in my opinion is moreless the same, unfortunately the HDR feature is incomparable with the one of gcam.
This is just my impressions, unfortunately I've not a great skills for set the single value (ISO, exposure...etc..), maybe this is the reason.
autokoise said:
Footej is absolutely better of stock camera present by default on custom rom ( com.android.camera2), just in terms of smoothness and quick response when you launch the app, the quality of picture in my opinion is moreless the same, unfortunately the HDR feature is incomparable with the one of gcam.
This is just my impressions, unfortunately I've not a great skills for set the single value (ISO, exposure...etc..), maybe this is the reason.
Click to expand...
Click to collapse
You can also try Bacon Camera and Vector Camera (from f-droid.org, not G. Play). Both also work on A12 GSI.
-Alf- said:
You can also try Bacon Camera and Vector Camera (from f-droid.org, not G. Play). Both also work on A12 GSI.
Click to expand...
Click to collapse
ok @-Alf- ,thanks...for now in these days I plan to stay on this wonderful RR (A10), maybe in the future I will test some A12 cusRom, do you have never tried this one from @RobotHanzo?
For me is absolutely incredible the smoothness, stability and solidity of this build...I've never tried a gsi romS (I'm a custom maniac since 2013), in my (wrong a this point) opinion the only solid solution was a official, specific release for each different device, snapdragon as usual...apart the gcam incompatibility, this little, old device, fly with this GSI version of RR! Even the battery backup is amazing, 3:40-4hours of SOT per day, I'm shocked!!
autokoise said:
do you have never tried this one from @RobotHanzo?
Click to expand...
Click to collapse
I've tried RR (10) 8.5.8 from @expressluke
https://forum.xda-developers.com/t/some-tested-gsi-roms-a11.4245275/
-Alf- said:
I've tried RR (10) 8.5.8 from @expressluke
https://forum.xda-developers.com/t/some-tested-gsi-roms-a11.4245275/
Click to expand...
Click to collapse
I've tried until now (last 15 days):
LosQ: very laggy, there's no NFC and, most important, the fingerprint sensor stop working after 1st reboot.
Lir: NFC is not present, fingerprint stop work after 1st reboot and, most important, there's no way to flash a gapps package (not works Bit, Nik, Flame, Open and Lite).
Crdrom: exactly the same problems of LosQ.
Lineage 16 (official and not) have a very big problem for me: the second SIM implementation don't exist (probably like every Pie build, GSI and not).
Havoc: official GSI have a fully working NFC but the fingerprint stop working after 1st reboot, (after 1st reboot the fingerprint sensor work only just for notification panel etc...), then I've tried to set a face unlock but, a this point, the system become unstable and starting several reboots.
These are the reasons why i consider this RR almost a masterpiece (just poweroff alarm don't work, but i think this is impossible on device with 2 recovery installed at the same time, or maybe is typical aspect of GSI roms).
*always pardon for my English!!
autokoise said:
LosQ: very laggy, there's no NFC and, most important, the fingerprint sensor stop working after 1st reboot.
Click to expand...
Click to collapse
autokoise said:
Lir: NFC is not present, fingerprint stop work after 1st reboot and, most important,
Click to expand...
Click to collapse
You are doing something wrong bro
autokoise said:
most important, there's no way to flash a gapps package (not works Bit, Nik, Flame, Open and Lite)
Click to expand...
Click to collapse
Kidding? You can choose gapps or vanilla variant, hm?
autokoise said:
LosQ: very laggy
Click to expand...
Click to collapse
Really?
I'd argue with you but I see no point in doing so.
-Alf- said:
You are doing something wrong bro
Click to expand...
Click to collapse
I've follow the identical procedure for every flash, thanks your suggestions, i suspect (just an idea) which the p20 lite mount a different fingerprint sensors on different sample of this model (like on Xiaomi goodix/fpc), tell me if i wrong!
-Alf- said:
Kidding? You can choose gapps or vanilla variant, hm?
Click to expand...
Click to collapse
My flashes is always with vanilla package, inbuilt gapps is so heavy in my opinion, the problem happened when i try flash a gapps package on build "...bvZ", i don't know why.
-Alf- said:
Really?
I'd argue with you but I see no point in doing so.
Click to expand...
Click to collapse
i'm not here to bother anyone, i just wanted to humbly report my experience with these kirin devices not at all easy, i just hope my experience will help someone, like yours @-Alf- has helped me enormously!