Hello, i have a Galaxy watch 42mm and suddenly all my sensors have stopped working, i have tried everything, reset, hard reset, but nothing has worked.
I am thinking to downgrade the firmware just in case is a firmware bug but i cannot find any site to download it from.
Does anybody have any idea where to find an older version for SM-R810?
Thank you
Just take a look here: https://forum.xda-developers.com/sm...wares-roms-r8xx-netodin-galaxy-watch-t4077071
or here: https://4pda.ru/forum/index.php?s=&showtopic=978373&view=findpost&p=92121314
Related
After an update to Samsung Apps, it disappeared from my phone, so I flashed it with original indian FW but Samsung Apps still didn't come. I tried even Nordic FW but nothing changed. In these two FWs BOOTFILES and FFS files were not there. Today I got European FW which had bootfiles and FFS too. So I flashed using this FW and got my Samsung Apps back. So I thought I should go back to original Indian FW and tried flashing it. Flashing goes successful but nothing actually changes. And Samsung Apps disappears again. Anyone know why this is happening?
Hi,
which firmware did you tried ?
regards
Hi everyone , i need some serious help with my S4. I recently downgraded the firmware using instructions from http://forum.xda-developers.com/showthread.php?t=2258628 . Everything went smooth until the S4 booted and the WiFi doesnt work. I've done everything i've read from the comments like hard reset and wipe cache. So far none of that worked. I don't want to upgrade the firmware to keep my root, but if I have to i will for wifi. Since i don't have WiFi, my question is can i use Odin to update? Thanks in advance.
Edit: I think i found my answer http://www.tsar3000.com/Joomla/inde...anual-update-guide&catid=57:how-to&Itemid=104
Hi,
After upgrading OTA to kitkat (australia version) one of my favourite apps stopped working and caused constant reboots to my tab3.
I tried to downgrade with odin to the stock 4.2.2 (auatralia, from sammobile) but I could not. After flshing, the "samsung galaxy tab 3" logo appeared but the tab never turned on, it kept rebooting and rebooting from ours. I tried the same with other 4.2.2 roms with the same results. However I was able to flash any 4.4.2 rom from sammobile.
After that I tried to flash some 4.2.2 roms using twrp and bindroid, I had the same rebooting problems. However, with twrp I can flash 4.4.2 based roms as pimpdroid.
So, I do not why, apparently my tab only accepts 4.4.2 roms... Any suggestions about what should I do to go back to 4.2.2?
Thanks for your time,
A.
Bootloop in P5210
Hi I'm trying to get back to 4.4.2 to 4.2.2 works because although there are excellent applications like Facebook that are causing me problems. But in trying to make the retoroceso as I usually do with ODIN stock form and I was left in a permanent reboot and does not pass the SAMSUNG logo .... solution? Thank you!:crying:
@planinsky, Have you tried a firmware for another region in the world? I live in the United States but have found firmware for the United Kingdom or Canada works best when I flash. There should not be any difference in the firmwares except for regionalization, but it seems some work and some don't work for me. Regional settings can always be tweaked in the Settings panel after install. Do you have a nandroid backup made in TWRP? Those usually always recover a device. I too had a problem having anything flash when I first started making my rom. 3 weeks I had a device that would not boot. So it is recoverable. Odin will save your device.
@planinsky and @MDCB try to download this firmware from Sammobile. This is for the UK 4.2.2 version. http://www.sammobile.com/firmwares/download/28243/P5210XXUANB4_P5210BTUANB1_BTU.zip/
I usually use ODIN 3.07. I assume you know the following but just in case. Remember to flash it in the PDA slot. Only have "Auto reboot" and "F. Reset time" checked.
Using Odin will reset anything the 4.4.2 builds have done to the partitions. If it doesn't work, I can only suggest to try again. When it comes to flashing, sometimes the TWRP builds for our device can be a little goofy in writing. I have not investigated completely. In the 4.2.2 roms I have flashed pimpdroid and cagrom, they seem to flash good with Moonbutt77's philz recovery with very little problems. I however cannot get 4.4 roms to flash in philz but only in TWRP. So sometimes the recovery itself seems to have a problem with the android version, or so it seems.
The above is only written from my experience on this device and cannot predict every situation.
Good luck.
Hi! Thanks for the tips.
Ufortunately, I have already tried 4.2.2 ROMS from different countries (from Sammobile): Australia (the original country of my Tab), UK, New Zealand, Belgium and US. None of them worked. I'm still downloading other ROMS but I'm startin to lose the faith... The custom ROMS I have tried, neither work and get into the bootloop.
The backup I have from TWRP is from a 4.4.2 so it's not a solution.
On the other hand, I can flash almost any 4.4.2 ROM with odin and/or TWRP. So I'm afraid I'll soon give up and I will accept that my Tab will not longer run the app I loved (Movistar TV)... Hopefully with the arrival of lollypop the developers will update the app and the bug which causes the crash will disappear.
My mom has had a z2 force for almost 2 years...no issues, now all of a sudden data and wifi are gone and the phone doesn't have an IMEI. Seemingly after an ota update. As it's already old o figured I'd try to flash a rom to fix. I've tried returning to stock with the most recent flash all, the last flash all, tried installing lineage, tried installing 10 potato...nothing is working! Anything else I can try to get this working again???
I also tried to run other flashalls from xda, but didn't see a .bat file in the zip file....only a flash file...is there something else I'm missing? Sorry I'm not really proficient in motos
Mom wasn't dabbling in the dark arts known as pie was she? If not then you should be able to flash the latest TMO firmware then do a factory reset from recovery to restore the baseband.
She was still on Oreo when everything happened .....I attempted to flash the latest firmware, but still no luck...that's when I tried to install a pie rom---no luck there either
Draztik31 said:
She was still on Oreo when everything happened .....I attempted to flash the latest firmware, but still no luck...that's when I tried to install a pie rom---no luck there either
Click to expand...
Click to collapse
The trick to restoring baseband is the factory reset from recovery, not a reset from settings or anything else. As for trying to flash a pie rom, hopefully it was just a rom and not a pie firmware. If anything took from a pie firmware you might be sol.
It was just a rom, no pie firmware at all. I tried restarting from recovery and everything to no avail...is there a specific flashall you would recommend? I tried both the March and August T-Mobile ones...don't know if anyone has had success with a different one?
I have reseted my watch and now it’s on tizen 4.0.0.2 and it tells me that I have already installed the latest software. I have tried to hard reset it but it didn’t solve the problem.