Related
Hi,
this is a topic I want to start in order to help the development of more intelligent brightness control for Galaxy S (probably regional variants of it will benefit as well).
It began with my PM to some of kernel DEVs that I've noticed brownish color instead of black on ONE brightness setting. My idea was to omit that one brightness level.
Overnight, I already got two responses. One that it should be no problem and one that the link I sent might lead to fixing the problem I mentioned as well (color correction).
The other, connected to brightness topic, thing I've noticed is that auto control of it is retarded. First, it's too jumpy without any reason (like let's say change of outside brightness) and second it likes to set level that burn the eyeballs. I've never had such problem on my CM Hero.
Here's my original PM:
embrion said:
Hi,
I'm PMing you as the most popular kernels coders.
Long story short: SAMOLED screens like to make black or similar colors brownish at low brightness. I've (and not only me) noticed that there's a step just about min. when it starts to be brown and a next step after that it magically stops. The idea is to omit this step at all or just in auto brightness table. I believe It's doable by using those methods.
The original story begins here from the first half of #522 post
Like I've wrote there, this problem exists in all kernels and all color temperature variants of them + stock one.
If you're interested, please respond me. If not, also respond as I'd like to know if I can count on anything.
Thanks
Click to expand...
Click to collapse
Some links that might help:
[SOLUTION] Fix for minimum screen brightness! [10/13 - adjustable]
Kernel makers, please add the ability to adjust auto brightness.
[APP] Different auto-brightness
Gizmodo - Why iPhone 4 and Android Brightness Controls Are Effectively Useless
My random thoughts:
One option would be fooling the sensor that it is less bright than it is
Another, more proper I believe, it to modify some brightness tables to leave extreme brightness levels to extreme outside light situations. This one would also help skipping this "brown" brightness level as like I said, it looks to be only one level
Color correction MIGHT fix "brown" problem too, but I'm not sure as COLD and WARM kernel variants didn't changed this brown problem (unless colors are optimized only for some of the levels like I've read at VOODOO site)
CM 6 already has such brightness level options in Settings-> CM Settings - > User interface -> Automatic backlight -> Use custom(just checked on my Hero) so probably lot of code can be reused (as I believe there is CM for Galaxy S)
Kernel DEVs, fell free to hijack this thread. It is to help your cooperation (unless each one of you prefer to solve problems on they own ) Btw. don't be offended if I didn't included you in the DEVs list I've sent my PM. It was late and I PMed only those I've noticed that they kernels I've used. All of you are more than welcomed.
Other, please don't post "I cannot see any brown", and those one that can see it, please stop posting about info after first 5 people do
I'm so happy to read this threat. I had posted questions about display and auto brightness a couple of months ago in the questions section but never received any credible responses.
My problem is that when I turn auto brightness on, not only does my display get exceptionally dark, but it becomes very noticeable that e.g. grey turns more brownish. Comparing my display to yet another Galaxy S confirmed my suspicions that this is not they way the display is supposed operate, i.e. compared to mine the other Galaxy stayed a lot brighter in equal lighting conditions and the grey remained grey (instead of brownish-grey like mine). I compared the grey tones of the numeric buttons in the stock Dialer APP to conclude this.
I suspectED the light sensor might be defective, but I have run the test menu on a couple of Galaxies (*#0589#) and the units always display the same values when put next to mine.
You might see why this is bugging me so much, it seems my galaxy's display is not using less battery even though I get less brightness than the others on auto brightness. Unless I manually bump up the brightness to full the colors on my screen look dull (grey turns Brownish, and over all it looks not as alive) as compared to other units. Simply bumping the brightness up is of course not an option, this drain the battery like crazy.
EDIT: I too have tried the various Kernels, hardcore warm and cold, voodoo w/ color fix sadly all to no avail
EDIT2: @embrion The above all doesn't explain why our phones have this problem, but the far majority of Galaxy S phones doesn't. Of course I cannot statistically back this up, but I have not physically seen any other device that gets brown on autobrightness like ours. Any Ideas?
Do you say your friend's Galaxy S doesn't turn brownish or it does but gives higher brightness than your device in same lighting conditions?
embrion said:
Do you say your friend's Galaxy S doesn't turn brownish or it does but gives higher brightness than your device in same lighting conditions?
Click to expand...
Click to collapse
It does not turn brown and appears much brighter in equal lighting w/ auto brightness ON. I edited my post above, please read again if it was unclear before. Thank you!!
You should check it at manual brightness at level set few steps higher than min. I'd like to separate brownish display problem at one brightness level from inproper light sensor measure
embrion said:
You should check it at manual brightness at level set few steps higher than min. I'd like to separate brownish display problem at one brightness level from inproper light sensor measure
Click to expand...
Click to collapse
Like I said, the light sensor does not give an improper measure, the readings in *#0589# menu are equal across the devices (including mine). The brownish color tones do, to some degree, disappear if the brightness bar is set two ticks to the right of minimum.
(Auto)brightness corrections
Original Auto Brightness level is too high & sluggish.
It 's need to fix like a voodoo Brightness level fix (2.1 only).
schiphol said:
Like I said, the light sensor does not give an improper measure, the readings in *#0589# menu are equal across the devices (including mine). The brownish color tones do, to some degree, disappear if the brightness bar is set two ticks to the right of minimum.
Click to expand...
Click to collapse
Yes, mine too. Second step from min. setting. I'll ask guys at my local forums to get some statistics. If your friend doesn't have such problem at the same color/theme than it must be display fault
embrion said:
Yes, mine too. Second step from min. setting. I'll ask guys at my local forums to get some statistics. If your friend doesn't have such problem at the same color/theme than it must be display fault
Click to expand...
Click to collapse
Which CSC code do you have? I mine was originally XEN (Netherlands). The units I tested that did not have the problem were all DBT (german Sim free). Just asked my brother and he says his phone also gets brownish (also XEN). Have to check product codes later, will update then.
Mine is XEE (Orange, Poland)
Supercurio did some tinkering with those settings:
https://github.com/project-voodoo/l...a2/Kernel/drivers/video/samsung/s3cfb_mdnie.c
I suspect this is the file we need to modify;
Code:
mDNIe_data_type mDNIe_UI[]=
{
#ifdef CONFIG_VOODOO_MDNIE
// Voodoo color: optimized UI mode
// reduce the sharpness filter radius to make it much closer
// to the real fuzzyness introduced by the SAMOLED Pentile pattern
// color saturation boost on everything is also disabled because
// it causes harm on stock settings (exaggerated colors)
0x0084, 0x0040,
0x0090, 0x0000,
0x0094, 0x0FFF,
0x0098, 0x005C,
0x009C, 0x0613,
0x00AC, 0x0000,
0x00B4, 0x0A00,
0x00C0, 0x0400,
0x00C4, 0x7200,
0x00C8, 0x008D,
0x00D0, 0x00C0,
END_SEQ, 0x0000,
Any thoughts and datasheet quotations on this? Because seriously I see just random numbers in this.
Some interesting code begins around line 315, but seriously I'm clueless
Another interesting file:
https://github.com/project-voodoo/l...2/Kernel/drivers/video/samsung/s3cfb_tl2796.c
My screen has brownish/reddish deep grays on brightness settings under 16-17%. However when I set it over 17% and use screen filter app deep grays are NOT brownish/reddish, this means there is definitely something with lower brightness settings.
Xan, check out the link I've posted in the first post. He gives sources that might be helpful
And the problem appears only at 2nd step of brightness (counted from zero brightness)
embrion said:
Xan, check out the link I've posted in the first post. He gives sources that might be helpful
And the problem appears only at 2nd step of brightness (counted from zero brightness)
Click to expand...
Click to collapse
@embrion so did you pm Supercurio? What did he say? It's too bad this color/sharpness fixing will probably be put on a back burner what with Gingerbread and CM7 development. D*RN IT! I tried an app in the market that is more precise than the built-in slider. Try it out Adjbrightness (free). I punched in all values possible between 2-255. The tipping point (where the browness is gone) lies at when you go from 34 to 35. Is this the same for everyone suffering from this problem. Please remove all apps like e.g. 'screen filter' before you try!
For me crucial step is going from
/ # echo 53 > /sys/devices/platform/s3cfb/spi_gpio.3/spi3.0/backlight/s5p_bl/brightness
to 54, however I'm running trasig's voodoo.
While 54 and over looks ok, lower values are... reddish/pinkish.
@schiphol: yes I did but no response. In dark colored Gingerbread era, this problem will be become more and more evident.
@xan: dzieki I'll flash latest Darky as it is based on trasig's voodoo and try your fix.
--edited--
Supercurio just responded me, I'll let you know about results
embrion said:
@schiphol: yes I did but no response. In dark colored Gingerbread era, this problem will be become more and more evident.
@xan: dzieki I'll flash latest Darky as it is based on trasig's voodoo and try your fix.
--edited--
Supercurio just responded me, I'll let you know about results
Click to expand...
Click to collapse
No fix there, just a different behaviour...
Would like to see this in next voodoo, might even write some simple user interface for this.
I have an idea but its not quite clear yet, however if this patch will let most users 'calibrate' their screens.. I think I'll give simple GUI a shot.
@embrion
Could you perhaps upload the screenshots you talked about in R64's thread so I can replicate. Because of different kernels and settings I want to try and establish beyond a doubt that the problem we're having is of the same nature and root cause. Thanks
This wont be visible on screenshots. You need to make a photo, problably with DSLR and know how to do it
I'll try it today and let you know
According to Supercurio, this is Samsung's color profile deviation, not SAMOLED fault itself.
Anything software broken can be software fixed
@schiphol, xan: yes, it won't be noticed at screenshots, I've already compared R64's black notification bar screenshots and my brown ones. Color picker showed a little difference in color (R:24, G:24, B:24 or something VS RGB: 0, 0, 0 - true black). Such difference should'n be visible and is not visible from software screenshot point of view but Samsung color profile makes 24,24,24 brown IN REAL LIFE while 0,0,0 is still black. I repeat, they're both black at screenshots no matter which brightness level is set, but only 0,0,0 black doesn't look like brown when viewed by bare human eye. Samsung profile at this brightness treats 24,24,24 as brown while it should as black.
--edited--
You're right, Xan. It's just another, ( but 1337 ) method of changing the brightness. I thought there's a plaintext table with levels accessible to change by hand
Hi Ok I have kept the brightness at 2 clicks to the right from minimum to stop grey from looking grey-brown all through today. Now my display accounts for 95% of the battery usage, it has never been this high before. The battery is at 25% whilst I only used the display for 44 minutes.
Thats ridiculous battery drainage and should be taken into careful consideration when a fix is developed for this issue. Are you guys having a similar experience??
Hello Everyone,
I have a problem with my amami and I doubt I am the only one but for some reason people do hardly complain: the brightness even at lowest possible setting is still too bright.
I had this back when I had original FW and I am having the same issue with CM11 (latest nightlies). Using manual control or auto-brightness doesn't make much difference, i.e. in a totally dark room the ambient light sensor reports 0Lux and the screen is still too bright.
I found a workaround already (the ScreenFilter app that people recommend all over the internet) but it sucks because it heavily reduces the picture quality, i.e. visibly reduces contrast and especially the gray color resolution. And it also doesn't reduce power consumption like real brightness value change would do.
I looked around for possible solutions and there is a trick with writting a new value of current limit to Linux settings (some mA value between 0 and 20 to some max_current file in procfs). And this really helps but also impacts the maximum brightness, the screen is hardly ready in sun light with reduced current.
Is there a silver bullet? I am thinking about writing an app for that but it would require SU permissions and is kinda dirty to implement. Can anyone recommend a better solution?
have you tried the xposed Modul "minimum brightness" ?
Install Lux Brightness. from play store.
You can overboost it or make the screen so dark that you can't even see it.
Another great screen mod is Twilight which basically dims the screen red based on clock so it helps fall sleep faster when using phone before bed.
New Folder said:
Install Lux Brightness. from play store.
Click to expand...
Click to collapse
Yes, another vote for Lux. It lets you set brightness to negative levels, mine is usually around -50%. https://play.google.com/store/apps/details?id=com.vito.lux&hl=en
Vote for Lux here too.
Nothing comes close
camaro322hp said:
Yes, another vote for Lux. It lets you set brightness to negative levels, mine is usually around -50%. https://play.google.com/store/apps/details?id=com.vito.lux&hl=en
Click to expand...
Click to collapse
Thanks for the hint. I tried the Lite version and AFAICS it simply uses the same trick as ScreenFilter and other "sub-zero" regulators, putting an alpha overlay on top of the image stack.
You can identify this kludge easily by looking at the button areas, they don't get darker anymore. And you can see the black level not getting real black, i.e. the power consumption is not reduced.
However, Lux seems to be one of the better toys because of the plugin interface. Unfortunately there is no HW plugin for Sony devices but judging by the quick look at the Nexus-4 plugin (it's open source!!) it should be possible to adopt this method to Z1 as well. So, maybe when someone could eventually implement that.
xposed Modul "minimum brightness" works, i tested it for you. you can make the screen dim to complete black with your normal display brightness slider without grey or black overlay. it just sets down the minimum brightness level to 1 or 0 (default is 10 or 20), so it should also work with enabled auto brightness
chertVdetali said:
I looked around for possible solutions and there is a trick with writting a new value of current limit to Linux settings (some mA value between 0 and 20 to some max_current file in procfs). And this really helps but also impacts the maximum brightness, the screen is hardly ready in sun light with reduced current.
Click to expand...
Click to collapse
As far as i remember, /proc is only used to call upon information, not to set specific values. What you are looking for is placed within /sys.
To be precise in /sys/devices/leds-qpnp-ee125e00/leds/wled:backlight/. There you will find a file called max_current with which you can easily control the brightness and set it to a very low level. Note that this actually dims the screen and not just applies a filter like most apps do...
One drawback is that the value will change again after you restarted the device. I set up a little flow with Automate β that takes care of this for me. I find this solution a lot better than all the screen filter apps.
This is true for CyanogenMod 11 and GreatDevs Kernel. It might be different on Stock. I know that the path for my Nexus 7 is sys/class/leds/lcd-backlight.
I hope this helps you a little bit.
rob rich said:
xposed Modul "minimum brightness" works, i tested it for you. you can make the screen dim to complete black with your normal display brightness slider without grey or black overlay. it just sets down the minimum brightness level to 1 or 0 (default is 10 or 20), so it should also work with enabled auto brightness
Click to expand...
Click to collapse
I am wondering how you can claim that the result is complete black. Calling this black is like saying "TN monitors have good black values" (I know such people, they change their mind quickly when they see my Eizo with a VA panel at night).
No, seriously, the default was already 10 (see config.xml in cm11 repo) and the difference between 1 and 10 is hardly visible. It's still way too bright for work without eye strain in the darkness.
@Wooaarr: thanks, this is apparently the way to go, I just need to find time to configure it. And yes, of course, the file is in sysfs and not procfs (automated typing, when I grew up with Linux there was no sysfs out there ).
chertVdetali said:
I am wondering how you can claim that the result is complete black. Calling this black is like saying "TN monitors have good black values" (I know such people, they change their mind quickly when they see my Eizo with a VA panel at night).
No, seriously, the default was already 10 (see config.xml in cm11 repo) and the difference between 1 and 10 is hardly visible. It's still way too bright for work without eye strain in the darkness.
@Wooaarr: thanks, this is apparently the way to go, I just need to find time to configure it. And yes, of course, the file is in sysfs and not procfs (automated typing, when I grew up with Linux there was no sysfs out there ).
Click to expand...
Click to collapse
when i disable autobrightness and push the slider to the left my screen goes completely off, so you wanna say that screen off isnt black? funny
chertVdetali said:
Thanks for the hint. I tried the Lite version and AFAICS it simply uses the same trick as ScreenFilter and other "sub-zero" regulators, putting an alpha overlay on top of the image stack.
You can identify this kludge easily by looking at the button areas, they don't get darker anymore. And you can see the black level not getting real black, i.e. the power consumption is not reduced.
However, Lux seems to be one of the better toys because of the plugin interface. Unfortunately there is no HW plugin for Sony devices but judging by the quick look at the Nexus-4 plugin (it's open source!!) it should be possible to adopt this method to Z1 as well. So, maybe when someone could eventually implement that.
Click to expand...
Click to collapse
Interesting information, I did not know that. You are correct, the navigation buttons are brighter than the rest of the screen at negative values. I had noticed that before but didn't know why. Works well enough for me though.
rob rich said:
when i disable autobrightness and push the slider to the left my screen goes completely off, so you wanna say that screen off isnt black? funny
Click to expand...
Click to collapse
Well, you claim that it works for me because you tested it on your device. So... yeah, why not, I could say what you mentioned above just following the same logics. :silly:
What's your lcd display?
1) dial *#*#64663#*#*
2) Version Information
3) Check under "TP:"
Mine is EBBG
Also, is there a way to adjust color temperature? I wish we had the color temperature settings for warm or cool displays
EBBG, too.
I like having on the night light mode all the time. I don't like the blue color all phones have.
Same here and I also think it's a little bit cold. But having night mode on all the time? Way too warm for me....
I had this also and my colors here is somehow slightly warm compared to my xperia z lcd
rfkd said:
Same here and I also think it's a little bit cold. But having night mode on all the time? Way too warm for me....
Click to expand...
Click to collapse
You can set the intensity. It's better for your eyes (or that's what they say). And you get used to it in a few hours But it's personal preference.
adriakus said:
You can set the intensity. It's better for your eyes (or that's what they say). And you get used to it in a few hours But it's personal preference.
Click to expand...
Click to collapse
How to set intensity?
Just go to settings/display/night light. There is a slider there.
I also placed a shortcut in the quick tiles so I can turn it off if I want to and get to the slider.
If you get root and Kernel Adiutor, (maybe necessary to flash new kernel), you can set through kernel native RGB, saturation options, etc. It's called KCAL color calibration. There are posts at xda with even different profiles (think like 'how to turn lcd into amoled'). I don't have the A2, but since reviews complain about blue tint and lack of display calibration as in MIUI I thought this could be the solution for AO.
I also complain from this ****, I compred color temperature to my friend's phone (with miui)
And I found a huge difference in color temperature!!
Arc Lighting adds a highly customizable ring of light around the camera cutout of your phone. You can use this light with various indicators such as audio visualization, notification lighting, critical or low battery warnings, as well as a charge indicator. The ring can also appear on your Always-On display. (to make aod work you need to make sure you have downloaded always on amoled and activated it, you also need to make sure samsung stock aod and samsung edge lighting is disabled under samsung display settings you also need to make sure that aod is enabled under arclighting with override set to off)
https://www.youtube.com/watch?v=FibMTD5Mdx8
Features:
- Highly customizable lighting for the Galaxy S10, S10+, S10e, and Note 10. Select a variety of colors, animations, and styles. (nord is not officially supported but the app now comes with a custom alignment adjuster so it should now be supported by just adjusting this under cutout settings make sure realtime adjustment is set to off when you're finished any help on official support will be granted a tier 5 code)
- Always show ring with various gradient effects (add multiple colors and make them spin for a visual experience)
- An adjustable glow effect that can be turned on or off (sometimes this can cause the light to freeze to a white glow this will be fixed)
- Notification lighting both when the display is on or off (update planned for only the lockscreen or only inapp)
- Music lighting that syncs the light to your music (does not work together with other indicators so other indicators will stop working if you enable music lighting this will be fixed)
- Battery indicator lighting for charging, low and critical battery states. (note it will not work until you configure the zones you want the colors to appearm, not configuring zones can freeze the light entirely this will be fixed)
- Device overheating indicator for gamers and power users (note it will not work until you configure the zones you want the colors to appear, not configuring zones can freeze the light entirely this will be fixed)
- Arc Lighting can be configured to match the color of your wallpaper, the app you're currently in, or both! (this only works for the only show ring and only when you set it to a solid color the option is not available for gradient colors which will be added later)
This app requires certain permissions to function correctly.
Accessibility: This permission is used for the ring to appear over your lock screen, always-on display, and for accessing the color of the current app you're in. This permission is required for the app to function properly.
Draw Over Other Apps: This permission allows the ring to show on top of other apps. This permission is required for the app to function properly.
Microphone Access: This permission is used to analyze the internal device audio for the music lighting. You will not be asked for this permission unless you choose to enable the Audio Visualizer indicator for the ring.
Storage Access: This permission is used to get the color of your wallpaper. You will not be asked for this permission unless you choose to use the color of your wallpaper for the ring.
Notification access: This permission is used to change the color of the ring after notifications
Burn-in concerns: Some Android displays may suffer from mild burn-in if a single item is displayed on the screen for an extremely significant amount of time. If you are concerned about this, feel free to enable the rotation animation in ring settings. That will ensure the display is constantly changing. Alternately, you can disable the default effect to only show the ring while an indicator is being triggered. Note: Samsung Galaxy devices come with burn-in protection that moves the pixels a little each time.
Compatible Devices
- Galaxy S10+
- Galaxy S10
- Galaxy S10e
- Galaxy note 10
- Galaxy note 10+
- Galaxy note 5g
devices to be tested and compatible
oneplus nord
samsung galaxy note 20 series
Download (xda members get free access, will provide unlock codes to any xda member who asks when you ask please specify if you want the code for my navigationbar app or this app as they both have similar names)
https://play.google.com/store/apps/details?id=com.symetium.holepunchcameraeffects
FREQUENTLY ASKED QUESTIONS:
how do i disable individual notifications: currently this is a planned update, you can go into custom colors and set each app you don't want notifying to 100% transparent
light is constantly flashing even if i cleared all notifications: sometimes theres forced notifications such as when you're charging it will force a notification that says you're fast charging, the light will pick up on these you need to hold on these notifications and turn them off to stop the light there should be nothing at all in the notificationpanel, if you still have a flashing light with nothing in the panel contact me.
frozen light: music lighting will disable all other indicators same with battery indicator or battery temp indicator, you need to set custom zones otherwise the light will be frozen, glow also tends to freeze the light so turn that off if it's frozen (this will be fixed in a coming update)
I will test the app as soon as I have the phone tomorrow
This could be exactly what I'm looking for! Could I get an activation key for both please ?
---------- Post added at 10:52 AM ---------- Previous post was at 10:33 AM ----------
I've tried the free version, for now. Can't seem to get the ring elipse-shaped to go around the front camera, also the app keeps crashing on my Nord
Hello,
application works but notification ring appears at the top middle. Could you send me activation code.
App installed but I can't see battery indicator. We need something different from a circle to surround two cameras.. It's possible?
Activation code please.
i like the idea a lot and love the feature where i can preview position etc. But, can it support shapes other than circle? Node does not have circle camera on front. i was hoping that i can overlay on the outer edge of front camera.
Trial time expires,hasn't been able to move ring to the cameras, got notification ring but on the center
Enviado desde mi AC2003 mediante Tapatalk
Looks to work but I can only get it to display a circle ring, which didn't help on a twin camera!
i bought the premium version but can't really use it cause of the shape of the ring. How can i change the shape that it fits the OneplusNord Cam?
Hello. My OP mord just arrived and I can help you with testing
SpeakToMyHand said:
i bought the premium version but can't really use it cause of the shape of the ring. How can i change the shape that it fits the OneplusNord Cam?
Click to expand...
Click to collapse
i have messaged the developer about it you can message him too if you wish to assist him personally @dave7802
https://forum.xda-developers.com/member.php?u=407871
I installed the app on my Oneplus Nord, but I can't adjust it for two cameras hole.
tachinete said:
I installed the app on my Oneplus Nord, but I can't adjust it for two cameras hole.
Click to expand...
Click to collapse
we are working on it right now i am just waiting to hear back from the developer
Looking forward!
activation code please!
Looking forward to the app being updated to cover the Nord's "pill" shape camera module.
Please can I have the activation code whilst awaiting the update? Many thanks.
could i have an unlock code please?
Eagerly waiting for Nord support and please send me activation code.
Moved to Nord! I love this idea. Send me an activation code for the Arc Lighting.
Please send me an activation code too. THX in advance. :good:
Asus has limited the use of Secondary RGB flash (which is the second flashlight, which never turns on by any means). It can only work if you have an armored number case. It is pretty much useless otherwise. There are apps developed for Customizing RGB flash but you need to root your device before doing anything.
But now, you can use that secondary colorful flashlight in Gcam while taking photos or videos and even in night sight
the only drawback is that you cannot use Gcam in fullscreen mode!!!
let's get into it:
prereqs
Make sure you are on the latest firmware version.
download and install gcam (Wichaya preferred)
Steps:-
1. Turn on system lighting from armoury crate
2. Set the screen on condition and choose static / color cycle or your preferred lighting condition
3. Select the color you want (if you selected static) and click save.
(check if the rog logo is lighted up)
4. open Calculator (you read that right) and type .12345+=
(your phone will enter SMMI test)
5. Find and select Aura and bump led at the bottom
6. click start After 5 cycles (Max) of RGB test the RGB flashlight will dance per condition
if you close this app the Bumper led will stop So...
7. go to recent page Select multitask window.(the RGB will pause momentarily Don't worry)
8. open Gcam it will open at the top or bottom of the screen and the RGB will function as long as you have the SMMI test app running at the top
9. Now you can shot beautiful pics with the color of your favorite as your Filter/ background without editing
10. Enjoy...
ASUS stock camera doesn't open in multiwindow mode. so we can't able to use that...