in short phone was bricked !
recovery mode wasn't working either
service center were charging 16k for PBA replacement.
afterwards i found the raw frimware "wWW__ZS620KL_90.11.162.111_MR9_20191008_release-user.raw"
phone booted flash was success
but here's an issue it's stuck at boot animation ffs does anyone resolved their issue?
Related
hey guys,. just started trying to fix my friends phone an N7100RWDXSG , boot loop problem, so i opened up ODIN and flashed it with an international ver XXV-N7100UENA1 then with an XSG,. these two FWs flash with no problems but still get the bootloop ,. but when i plug in the charger the device turns on dunno why take out turns off then bootloop again,. . Tried another FW PHver (Phililppines) where im from this one messes it up gets stuck on samsung logo and cant get in recovery mode properly ,.
so im wondering whats the right FW to use guys? really lost here,. appreciate some help,.
THANKS
Hey, my Lg G4 H815 is dead. It got a bootloop at the logo. I only one got it to the startscreen but it died again.
I tried every thread offered I found. I ended up with going into download mode and install back to stock. This didnt work with lg flashtool so I tried the method with lgup. Nothings changed. What now happens is that when trying to get into download mode, it says some seconds donload mode and swithes back to the logo. Since then I dont even get into hard reset mode.... So can I through it into my trash can? Or does anyone know how to fix this? I would be thankful for every answer.... have a nice weekend you all
as long as the phone is for your region LG should repair/replace it. I just had the same issue with my H811 and despite it being 1 year and 2 months old they repaired it free of charge.
Hi,
The issue is that when I switch on my tab it gets stuck on the asus logo indefinitely and doesn't go past that. After searching on the internet, i figured that i am supposed to reflash my firmware. I might have reflashed a wrong firmware because now when i enter my droidboot, it shows a white bar with a usb sign. So technically i cannot enter droidboot now (which I was able to do initially when the ASUS logo problem started).
Kindly guide me in detail how I am supposed to deal with this issue.
Do you think there's a motherboard issue going on in here?
ME TOO ME372CG hard brick
AliceMo said:
Hi,
The issue is that when I switch on my tab it gets stuck on the asus logo indefinitely and doesn't go past that. After searching on the internet, i figured that i am supposed to reflash my firmware. I might have reflashed a wrong firmware because now when i enter my droidboot, it shows a white bar with a usb sign. So technically i cannot enter droidboot now (which I was able to do initially when the ASUS logo problem started).
Kindly guide me in detail how I am supposed to deal with this issue.
Do you think there's a motherboard issue going on in here?
Click to expand...
Click to collapse
me too i tried all, raw files asus flasher etcetc, nothing works no recovery menu or else, only logo
anibody ?
Hello,
I received my phone two weeks ago (BND-L21 version) and Friday I tried to manually update it to Oreo (with this topic : https://forum.xda-developers.com/honor-7x/how-to/manual-update-to-oreo-beta-emui-8-bnd-t3767044). I don't know what I did wrong but it didn't work (my phone didn't reboot on the stock recovery, only on TWRP). After a few try, my phone wasn't booting anymore, it was stuck on the orange message about the unlocked bootlader and the message "Your device is booting...".
I managed to get it back working with this topic : https://forum.xda-developers.com/honor-7x/development/firmware-updates-link-flash-risk-t3723810. The problem now is that I'm stuck with the chinese firmware (i don't have the Honor animation when my system is booting, I now have an Android logo on a black background). I don't have any Gapps installed and I can't flash anything with TWRP. When I try to flash SuperSU, i have an error extracting ramdisk failure and something with the boot.img.
Now the model of my phone is a generic_a15 and I don't know how to get back on track.
I'm a little bit desperate now, I don't know how to install another firmware. I tried to install this custom rom : https://forum.xda-developers.com/honor-7x/development/openkirin-aosp-8-0-honor-7x-t3746257 but I was stuck on the orange message again.
If anybody knows how to solve my problems, I'll be grateful
Thanks !
[UPDATE] I don't know if someone is reading but now my phone doesn't boot anymore and FRP is locked ?
Call Huawei customer support and get a ticket started to send your phone to the nearest repair center. Best of luck!
Waagic said:
Hello,
I received my phone two weeks ago (BND-L21 version) and Friday I tried to manually update it to Oreo (with this topic : https://forum.xda-developers.com/honor-7x/how-to/manual-update-to-oreo-beta-emui-8-bnd-t3767044). I don't know what I did wrong but it didn't work (my phone didn't reboot on the stock recovery, only on TWRP). After a few try, my phone wasn't booting anymore, it was stuck on the orange message about the unlocked bootlader and the message "Your device is booting...".
I managed to get it back working with this topic : https://forum.xda-developers.com/honor-7x/development/firmware-updates-link-flash-risk-t3723810. The problem now is that I'm stuck with the chinese firmware (i don't have the Honor animation when my system is booting, I now have an Android logo on a black background). I don't have any Gapps installed and I can't flash anything with TWRP. When I try to flash SuperSU, i have an error extracting ramdisk failure and something with the boot.img.
Now the model of my phone is a generic_a15 and I don't know how to get back on track.
I'm a little bit desperate now, I don't know how to install another firmware. I tried to install this custom rom : https://forum.xda-developers.com/honor-7x/development/openkirin-aosp-8-0-honor-7x-t3746257 but I was stuck on the orange message again.
If anybody knows how to solve my problems, I'll be grateful
Thanks !
[UPDATE] I don't know if someone is reading but now my phone doesn't boot anymore and FRP is locked ?
Click to expand...
Click to collapse
Hi All
I have a hard brick issue.
Device.. --Android TV box MXQ Pro 4k
--RK3229 Chip
--h26m42003gmr NaND
--Wifi Chip i need someone to help identify is.....Marked as S9012P
--link to folder with pics - drive.google.com/open?id=19zpX-wPwlswmgDJKL7Qs2JtZ2HsfI5GB
Heres the rub.............Device is 1 month old and just started running slow and freezing. I turned the device off and on again and it booted up but took very long to boot. After the desktop launcher loaded i started getting update failures and app failures as device was unusable. Started device in recovery mode cleared cache and reboot but no luck....Tried a hard reset but no success the device just refused to boot up. Updated a new ROM that worked but did not support the WIFI chipset. Found another rom and reloaded the new one but it Hard Bricked the device. no lights and not loading......cannot get into recovery mode and does not boot from SD.
I was thinking of trying Mask Rom Mode to i am unsure how to proceed.
Please assist any advice will help.
There is a serial port link on the board but im not sure what can be done with it.
Is the emmc dead? or has it just lost the boot image?