!! Help Galaxy Watch 46mm SM-R800 !! S/N RFAN - Samsung Galaxy Watch

Hi,
New to the forum and am looking for some help. I bought a Samsung Watch 46mm from a website (cause it was 100e cheaper) and everything was working very well until Tuesday when I got a software update. After that I had a few issues.
1) the battery was only lasting max 12 Hrs - even when only in phone mode.
2) Steps not updating
3) No green flashing light on bottom - no HR.
4) Generally watch is slow to respond to actions
I was onto Samsung support and to cut a look story short they aren't able to fix because they say the S/N is showing as a non EU watch. S/N starts with RFAN Model number is SM-R800
My questions are
1) How do I find out what region my watch is for
2) How do I go back to the previous software that was working OK
The new version of Software is
One UI Watch version 1.5,
Tizen version 4.0.0.7,
Software revision R800XXU1DTG1
Knox Version 2.4.0
Any help greatly appreciated!!
G

Related

[Q] Galaxy Note 2 Live Demo Unit

Hi everyone!I have a Galaxy Note 2 Live Demo Unit and it has Android 4.1.1.I tried to update it to 4.1.2 with Kies but it said that there isn't any software update for my device.I went at a GSM service,and they said that I have to be careful,because The Normal Note 2's software can brick my device and I have to use a Demo Software.Does anyone know a Demo Version of Android 4.1.2 for Note 2?I'm new on XDA so I don't even know a lot of things...
Ucigasul de Plictiseala said:
Hi everyone!I have a Galaxy Note 2 Live Demo Unit and it has Android 4.1.1.I tried to update it to 4.1.2 with Kies but it said that there isn't any software update for my device.I went at a GSM service,and they said that I have to be careful,because The Normal Note 2's software can brick my device and I have to use a Demo Software.Does anyone know a Demo Version of Android 4.1.2 for Note 2?I'm new on XDA so I don't even know a lot of things...
Click to expand...
Click to collapse
I upgrade note2 demo just yesterday using odin and full firmware uprgade without problem. I have no demo sw and ofcourse no gsm signal.
OTG USB host cable problem
I have two question about Note 2 N7100 demo live.
1. OTG USB host adapter cable lost connection on phone. It sees the phone OTG cable but constantly connects and disconnects immediately and so constantly repeated in a circle. This OTG cable I tried on another Note 2 (not demo) and works great.
Does anyone know how to solve this problem with "conecting-reconecting" OTG host cable.
2. If I make a Skype video call, the person on the other end can not hear me. However, I can hear him well. The problem goes away if I plug my headphones in. Strangely no problem during an audio only call. There are similar issues with Google talk video chat. Did you notice this problem on your unit.
This demo note 2 have stock firmware 4.1.2 and all function (except phone calls and sending SMS) work well.If it is important, I have reclaim the memory from 5 to 16GB with the original pit file.
Ucigasul de Plictiseala said:
Hi everyone!I have a Galaxy Note 2 Live Demo Unit and it has Android 4.1.1.I tried to update it to 4.1.2 with Kies but it said that there isn't any software update for my device.I went at a GSM service,and they said that I have to be careful,because The Normal Note 2's software can brick my device and I have to use a Demo Software.Does anyone know a Demo Version of Android 4.1.2 for Note 2?I'm new on XDA so I don't even know a lot of things...
Click to expand...
Click to collapse
if you flash a custom rom for a real note 2 it will work, i did it to my demo unit. does anyone know how to make it into a real phone would i have to write an imei to it, because it doesnt have one. it also says baseband unknown

Tips and Resouces to prevent your android smartphones been overheating.

Hello,
I have been using Samsung's brand of tablets and smartphones for several years. My first Samsung android device was the first generation of the Galaxy Tab P1000, and subsequently switched to Galaxy Tab P6200/6800, followed by Galaxy SIII and currently using NOTE II LTE N7105.
I would like to share some of my my experience with you:
1) Device casing with magnetic clip will cause your android sensors inaccurate,
2) Device casing in Black color will increase device overheating,
3) Update to the latest official firmware, as for NOTE II LTE N7105, the JB 4.1.2 lately released, try it as I tried and it is more stable and seldom get overheating,
4) For those devices which have been rooted, look for the specific kernel that will prevent overhearting,
5) The initial charging of your newly purchased device battery is very important, it must be charged at least 8 to 12 hours without turning it ON,
6) Visit these resources for further tips
<http://www.techcrates.com/4-ingenious-methods-to-keep-your-phone-from-overheating/>
<http://accuviewer.blogspot.com/2012/02/overheating-no-more.html>
<http://mobileoffice.about.com/od/usingyourlaptop/tp/How-To-Keep-Your-Laptop-Or-Smartphone-Safe-In-Hot-Weather.htm>
<http://techpp.com/2011/08/18/android-heating-issues-causes-and-how-to-avoid/>
Hope the above helps. Thanks.
well done bro....we appreciate every information that we get.
keep up the work!!
Thanks
Trying to not to turn on a newly acquired Note 2 for at least 8 hours while it charges is just impossible.

What software version you have on your Samsung Galaxy Watch?

I recently got my new Galaxy Watch 42mm after returning the 46mm because it was too big for my rest. So far so good, However I noticed that there was an update for Galaxy Watch 46mm and I have not received any similar update for the 42mm, I am not sure if this is the latest firmware I have or not, but one thing I know is that the Active watch have a more recent firmware than either of the galaxy watches. What is your latest firmware?
My 44mm active 2 is still on ASHF
I have a 42mm Galaxy Watch running
One UI Version 1.0
Tizen 4.0.0.4
Software Version R810XXU1CSG4
Knox Version 2.3.1
Software Version R810XXU1CSG4
Click to expand...
Click to collapse
CSG4 is the latest Firmware I know for most CSC/Sales Codes...
Except Brazil ZTO has:
Code:
R800XXU1CSI1
R810XXU1CSI1
No idea what kind of magic is inside...
Maybe only special for ZTO devices... maybe somebody find changelog...
Best Regards
Edit 1.
https://doc.samsungmobile.com/SM-R800/ZTO/doc.html
https://doc.samsungmobile.com/SM-R810/ZTO/doc.html
Aha... this is the "magic" difference...
Daylight saving time in Brazil has been changed.
Click to expand...
Click to collapse
I noticed that Galaxy Watch Active SM-R500 has a more updated (Tizen 4.0.0.5 and OneUI 1.2) and noticeably different software than any of the Galaxy watches (SM-R810, SM-R815) which has Tizen 4.0.0.4 and OneUI 1.0
Comparing Galaxy watch Vs. Galaxy watch active I can say that the updated Galaxy active software makes the watch more accurate and more responsive than the Galaxy Watch! Specially with tracking activities and Bixby.

Samsung A70 won't charge after Android 10 update - HELP

Hi all,
Finally started using my samsung a70 again and updated to android 10, (obviously didnt read any of the issues).
Now my phone won't charge and is out of battery. Is there anything I can do?
I have a repairman coming next week but I was hoping to use the phone
Thanks

downgrade samsung galaxy watch 42mm , due to not charging issue

can someone please help me downgrade samsung galaxy watch 42mm , due to not charging issue
it give message , watch need to warm up

Categories

Resources