Related
Team Win Recovery Project 3.0.2-1
WARNING #1: Flashing a custom recovery to your device will trip the Knox warranty bit on your phone. Check with your mobile provider to see if they will still cover warranty on Knox bit triggered devices. If you understand this risk, continue on.
You generally don't have to worry, as it's incredibly hard to brick a Samsung device, and physical damage warranties should be exempt from Knox triggering.
WARNING #2: The Galaxy S6 edge+ stock boot image has dm-verity, which prevents you from booting if you swipe to enable system modifications!
SOLUTION: Flash a root such as SuperSU or phh-superuser. You can also flash .
WHAT IS TWRP?
Oh come on, you know what it is - don't try to fool me!
In case you're serious, though...
Team Win Recovery Project is a custom recovery for Android devices.
It allows you to back up and restore your data, flash custom ROMs to your device, repair broken file systems, and root your device.
DOWNLOAD
You can find the device page here:
[url]http://teamw.in/devices/samsunggalaxys6edgeplus.html
There is a download link there, as well as instructions on how to flash it.
I highly recommend using Odin to flash when possible.
You can find a zip containing Odin as well as a link to Samsung's Mobile drivers page here:
https://idlekernel.com/flash-tools/
FULL STEPS FOR ROOTING YOUR DEVICE
In your ROM, go to Settings -> About device. Tap 7 times on Build number to enable Developer options.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Now go to Settings -> Developer options. (above About device)
You need to enable OEM unlock, otherwise you might end up with boot problems or be unable to flash later on.
Extract Odin_3.12.3.zip to your computer.
Install Samsung Mobile Phone Drivers for Odin to find your device.
Download a .tar image of TWRP for your device variant.
Reboot your device into Download mode. To do this, select reboot from the power menu and hold the [Volume Down] + [Home] buttons while your device reboots.
Once you reach the Download mode warning screen, press [Volume Up] to continue.
Open Odin and place that TWRP tar file in the [AP] slot without touching any other options, then press [Start].
Hold [Volume Up] + [Home] buttons near the end of the flash, and keep holding them until you are in recovery.
At this point, you will reach the screen asking you if you want to allow system modifications.
By swiping right, you will trigger dm-verity, and if you don't follow step 12 you will be unable to boot!
If you are going to root your device and follow the rest of these steps, then it is safe to swipe right and enable modifications.
Only if you want your internal storage or data partition to work in TWRP:
Go to [Wipe] -> [Format Data] (not advanced wipe) -> type "yes".
WARNING: This will wipe your internal storage, disable encryption, and factory reset your phone!
Go to [Reboot] -> [Recovery].
If you only want a bootable system partition or readable data in TWRP:
Download dm-verity and force encryption disabler.
Without exiting TWRP, transfer no-verity-opt-encrypt.zip to your device over MTP* and flash it using [Install] in TWRP.
** If your internal storage is encrypted, you will need to use adb sideload instead.
Go to [Reboot] -> [System].
Wait up to 5 minutes for your device to finish setting itself up.
* MTP, known as Media Transfer Protocol, is the same way you transfer files from your PC to your device when booted into system.
CHANGES
v3.0.2-1 - New device tree and kernel, support added for Marshmallow, f2fs, and MTP.
v3.0.2-0 - See here for the changes.
FEATURES
MTP support
USB Mass Storage support
Micro SDcard and USB OTG storage support
f2fs file system support (read, write, format, backup & restore)
exFAT file system support (read, write, format)
NTFS file system support (read, write)
ADB root
Full SELinux support
Built in android 6.0 tree
KNOWN ISSUES
Samsung encryption is not supported yet in TWRP 3 (see: https://gerrit.omnirom.org/#/c/17308/)
CONTACT & SUPPORT
You can find us on IRC at #twrp on chat.freenode.net.
You can also post in this thread and I will attempt to answer any questions you may have.
SOURCE CODE
TWRP: https://github.com/omnirom/android_bootable_recovery (android-6.0)
Device tree: https://github.com/TeamWin/android_device_samsung_zenlte (android-6.0)
Kernel: https://github.com/jcadduono/nethunter_kernel_noblelte (twrp-6.0)
CONTRIBUTIONS
Gerrit for TWRP: http://gerrit.omnirom.org/
Gerrit for officially supported devices: http://gerrit.twrp.me/
XDA:DevDB Information
Team Win Recovery Project - Samsung Galaxy S6 edge+, Tool/Utility for the Samsung Galaxy S6 Edge+
Contributors
jcadduono, Team Win & friends
Source Code: https://github.com/jcadduono/android_device_samsung_zenlte
Version Information
Status: Stable
Current Stable Version: 3.0.2-1
Stable Release Date: 2016-04-08
Created 2016-04-08
Last Updated 2016-12-18
Builds are coming soon guys, I just made the thread so that we have a reference when updating the site.
Bricked after flash, any suggestion? SM-G928F variant with audax plus 3.0 + audax kernel. Recovery not booting, tried reflash with odin old 3.0.0 recovery but the brick persist...
pmisun said:
Bricked after flash, any suggestion? SM-G928F variant with audax plus 3.0 + audax kernel. Recovery not booting, tried reflash with odin old 3.0.0 recovery but the brick persist...
Click to expand...
Click to collapse
Flash the twrp via Odin provided by the Audax rom, that note 5 recovery
Sent from my Darkside of Edge plus
Solved. Btw there is in repo of twrp dev which is linked by audax also 3.0.1 twrp working version. working as charm.
pmisun said:
Solved. Btw there is in repo of twrp dev which is linked by audax also 3.0.1 twrp working version. working as charm.
Click to expand...
Click to collapse
https://idlekernel.com/twrp/zenlte see 3.0.2-1, should be built soon on official, whenever someone confirms that everything is working ok
this includes:
adb shell
brightness slider
installing zips
formatting partitions (as ext4 and f2fs)
not crashing
backup & restore works for each partition
mtp
vibration
otg storage
whatever else you can think of checking
check on both L and M bootloaders, preferably quote my list with Y(working)/N(not working) in front of issues, and give recovery.log
jcadduono said:
https://idlekernel.com/twrp/zenlte see 3.0.2-1, should be built soon on official, whenever someone confirms that everything is working ok
this includes:
adb shell
brightness slider
installing zips
formatting partitions (as ext4 and f2fs)
not crashing
backup & restore works for each partition
mtp
vibration
otg storage
whatever else you can think of checking
check on both L and M bootloaders, preferably quote my list with Y(working)/N(not working) in front of issues, and give recovery.log
Click to expand...
Click to collapse
will try this evening.
pmisun said:
will try this evening.
Click to expand...
Click to collapse
welcome to xda, don't say you'll do things, just do things, it makes people think that they don't have to do it because someone else will do it eventually, slowing things down for everyone.
jcadduono said:
welcome to xda, don't say you'll do things, just do things, it makes people think that they don't have to do it because someone else will do it eventually, slowing things down for everyone.
Click to expand...
Click to collapse
will try and will do..make sense? ok i wont try this.
Why nothing for s6 edge + USC? Everything else except usc version :'(
Tokumei no said:
Why nothing for s6 edge + USC? Everything else except usc version :'(
Click to expand...
Click to collapse
read after first post, builds not up on the site yet, links available
jcadduono said:
read after first post, builds not up on the site yet, links available
Click to expand...
Click to collapse
But there has never been a custom recovery for the s6 edge + USC model. (SM-G928R4 US Cellular) Unless I have missed something then please point me in the right direction for a custom recovery for this specific model.
perfect update TWRP for G928F
https://idlekernel.com/twrp/zenlte/3.0.2-1/twrp-3.0.2-1-zenlte.zip
flash from CWM
It works perfectly fine! The only bug I've found is that vibration doesn't work but that's really not important
Sent from my SM-G928F using XDA-Developers mobile app
Can someone please work on a custom recovery for SM-G928R4? I mean come on now :'(
Works really great on my 928g only vibrations don't work but I don't care thanks a lot.
Guys help
I am using note 5 twrp-3.0.0-0-nobleltezt recovery for my G928C so how to flash this
I have the international SM-G9287 Duo variant on the latest firmware 6.0.1/MMB29K/G9287ZHU2BPC6 (marshmallow) and it's rooted. When I get to the step to press Home+Vol up towards the end of the flash it just reboots normal. Then when I turn of to boot into recovery Home+Vol up+Power I get "RECOVERY IS NOT SEANDROID ENFORCING" in red along the top with the Samsung GS6 logo. I have a tar file with the stock recovery and that boots fine. Any suggestions? Thanks in advance.
I can't find the download link to v.3.0.2-1 on the device page. Am I searching in the wrong place? (https://dl.twrp.me/zenlte)
fisk4rn said:
I can't find the download link to v.3.0.2-1 on the device page. Am I searching in the wrong place? (https://dl.twrp.me/zenlte)
Click to expand...
Click to collapse
Its link is in Post #6.
Powered by Elektrik
Team Win Recovery Project 3.0.2-0
This is for the Exynos SM-J710F, SM-J710FN, SM-J710GN, SM-J710MN, SM-J710K models only!
WARNING: Flashing a custom recovery to your device will trip the Knox warranty bit on your phone. Check with your mobile provider to see if they will still cover warranty on Knox bit triggered devices. If you understand this risk, continue on.
WHAT IS TWRP?
Oh come on, you know what it is - don't try to fool me!
In case you're serious, though...
Team Win Recovery Project is a custom recovery for Android devices.
It allows you to back up and restore your data, flash custom ROMs to your device, repair broken file systems, and root your device.
DOWNLOAD
You can find the device page here:
http://teamw.in/devices/samsunggalaxyj72016exynos.html
There is a download link there, as well as instructions on how to flash it.
I highly recommend using Odin to flash when possible.
You can find a zip containing Odin as well as a link to Samsung's Mobile drivers page here:
https://idlekernel.com/flash-tools/
FULL STEPS FOR OBTAINING ROOT
In your ROM, go to Settings -> About device. Tap 7 times on Build number to enable Developer options.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Now go to Settings -> Developer options. (above About device)
You need to enable OEM unlock, otherwise you might end up with boot problems or be unable to flash later on.
Make sure your don't have Factory Reset Protection enabled in your Google account or you may never be able to boot again!
More information: https://support.google.com/nexus/answer/6172890?hl=en
Extract Odin_3.10.7.zip to your computer.
Install Samsung Mobile Phone Drivers for Odin to find your device.
Download a .tar image of TWRP for j7xelte.
Reboot your device into Download mode. To do this, select reboot from the power menu and hold the [Volume Down] + [Home] buttons while your device reboots.
Once you reach the Download mode warning screen, press [Volume Up] to continue.
Open Odin and place that TWRP tar file in the [AP] slot, under Options tab disable Auto Reboot, then press [Start].
Once the flash is complete (Odin should tell you in the log, and progress bar on phone should stop), you can pull the battery then place the battery back in. Now hold [Volume Up] + [Home] + [Power] buttons until you reach recovery mode.
If you end up in stock recovery, start again from download mode step.
At this point, you will reach the screen asking you if you want to allow system modifications.
You will want to swipe to allow, otherwise the OS will replace TWRP once you boot!
If you want to be rooted with SuperSU:
Download the latest SuperSU by Chainfire.
Without exiting TWRP, transfer the SuperSU zip to your device over MTP* and flash it using [Install] in TWRP.
Go to [Reboot] -> [System].
* MTP, known as Media Transfer Protocol, is the same way you transfer files from your PC to your device when booted into system.
CHANGES
v3.0.2-0 - Initial build on twrp.me
FEATURES
MTP support
USB Mass Storage support
Micro SDcard and USB OTG storage support
f2fs file system support (read, write, format, backup & restore)
exFAT file system support (read, write, format, backup & restore)
NTFS file system support (read, write, format)
ADB root
Full SELinux support
Built in android 6.0 tree
KNOWN ISSUES
Samsung encryption is not supported yet in TWRP 3 (see: https://gerrit.omnirom.org/#/c/17308/)
CONTACT & SUPPORT
You can find us on IRC at #twrp on chat.freenode.net.
You can also post in this thread and I will attempt to answer any questions you may have.
SOURCE CODE
TWRP: https://github.com/omnirom/android_bootable_recovery (android-6.0)
Device tree: https://github.com/jcadduono/android_device_samsung_j7xelte (android-6.0)
Kernel: https://github.com/jcadduono/android_kernel_samsung_exynos7870 (twrp-6.0)
CONTRIBUTIONS
Gerrit for TWRP: http://gerrit.omnirom.org/
Gerrit for officially supported devices: http://gerrit.twrp.me/
@jcadduono ,
Thanks for official TWRP.
Hello guy !
@jcadduono , thank you very much for great work ! It's fully working for my SM-J710FN
My internal storage doesnt mount. Requires to format data. And when i format the data, it becomes ok, and when you try to enter recovery again it doesnt mount the data, internal storage..
Sent from my SM-J710GN using XDA-Developers mobile app
Not sure if both are related but I had flashed this TWRP 4-5 days back. Last night after reboot (wasn't the 1st one after flashing certainly), phone didn't boot because of custom binary FRP lock. Had to reflash firmware.
@jcadduono why is the internal storage is not showing and why data is not mounting it gives always error
Amit.A said:
@jcadduono why is the internal storage is not showing and why data is not mounting it gives always error
Click to expand...
Click to collapse
jhampzkidoodle said:
My internal storage doesnt mount. Requires to format data. And when i format the data, it becomes ok, and when you try to enter recovery again it doesnt mount the data, internal storage..
Sent from my SM-J710GN using XDA-Developers mobile app
Click to expand...
Click to collapse
Normally on the newer Samsung devices we can flash https://idlekernel.com/fun-stuff-trust-me/no-verity-opt-encrypt/ and then go to the wipe page and use [Format Data] to turn off encryption.
It seems there is a bug with the Exynos 7870 devices that causes vold to encrypt the device regardless of whether or not boot image fstab actually calls for encryption, and I've tried removing all hints of encryption support from the boot image and yet still the system will start encrypting on the next boot.
TWRP does not support Samsung's closed off encryption as it relies on the Android OS frameworks.
I've tried submitting this issue to Samsung's Mobile Security team but they just shrugged it off and said you can't turn it off on purpose.
So pretty much you're SOL for data partition (internal storage is inside that) reading in TWRP until someone comes along with system modifications to disable encryption or a custom ROM.
Hi bro... @jcadduono
Thanks for making Official TWRP Recovery for our J7 2016. Really its great work Thanks again. :good:
I have a 2016 SM-J700P... with the Exynos processor. Will this TWRP work for me?
Guys, will the fact that I now have TWRP recovery (I have a J7 J700M Model, from Brazil), using Android 5.1.1 -> Android 5.1.1 (debloated) cause any harm if I try to install 6.0.1 Marshmallow (http://live.samsung-updates.com/index.php?device=SM-J700M) using ODIN??
Thanks!
@jcadduono with the custom kernel http://forum.xda-developers.com/galaxy-j7/development/recovery-samsung-galaxy-sm-j710f-t3380736 encryption can be turned off.
thewinelover said:
I have a 2016 SM-J700P... with the Exynos processor. Will this TWRP work for me?
Click to expand...
Click to collapse
I doubt it, it has different exynos processer
artssa said:
Guys, will the fact that I now have TWRP recovery (I have a J7 J700M Model, from Brazil), using Android 5.1.1 -> Android 5.1.1 (debloated) cause any harm if I try to install 6.0.1 Marshmallow (http://live.samsung-updates.com/index.php?device=SM-J700M) using ODIN??
Thanks!
Click to expand...
Click to collapse
Offtopic post you have. Shouldn't be a problem for flashing a firmware for your device via Odin, whichever ROM you are using.
Join us Samsung Galaxy J7 2016 users Samsung Galaxy J7 ? Official Group in Telegram
Here you can chat with anyone.
Here many xda developers are present.
Here you can share any kind of data and files in any size.
And the biggest thing is that here you will get instant solution to any problem. :good:
Telegram Group Link : https://telegram.me/joinchat/Cmh8LUAs6AFEJUfawPCiWg
Regard by @KeMii :good:
I Root the Device but After root there were many issues..... I Keep on getting an notification that unauthorized action ...
and also my device keeps lagging it lags just for a second but this games every 2-3 mins
I also freezed KNOX with lucky patcher but the problem still persists any meathod to solve the problem Thanks
Installed Xposed... Few Modules and Partition Crushed... It was my Brand NEW Phone :'(
Hello, TWRP backup not properly block set. The size of EFS equal to 4 MB in size, inside the reserve of zeros.
No IMEI as all zeros!
Need to fix, or put my. In my TWRP you can flash system.img from firmware.
Good luck to everyone! TWRP is correctly bekapit EFS.
Extract postcode to flash the IMG.
http://4pda.ru/forum/index.php?s=&showtopic=763247&view=findpost&p=51990201
Here you can find a lot of useful for this smartphone. Please forgive me for my English :laugh:
The Lord does not forget to thank! And then I see the downloading is not weak and thanks to zero.
ermakovermakov7878 said:
Hello,your TWRP backup is not correct unit is specified. The efs size is equal to 4MB, inside backup zeros.
I took apart and tell it like it is. That's correct TWRP backup efs + setting backup System.img
Unpack the zip to flash the img.
http://4pda.ru/forum/index.php?s=&showtopic=763247&view=findpost&p=51990201
Here you can find a lot of useful for this smartphone.
Please excuse me for my English :laugh:
Click to expand...
Click to collapse
But it is all in russian :/
Will this work with J7-2016 with Snapdragon 617 ?
Skylinestar said:
Will this work with J7-2016 with Snapdragon 617 ?
Click to expand...
Click to collapse
No
will it work on Galaxy J7 prime ? it has same exynos 7870..
jcadduono said:
Team Win Recovery Project 3.0.2-0
FULL STEPS FOR OBTAINING ROOT
In your ROM, go to Settings -> About device. Tap 7 times on Build number to enable Developer options.
Now go to Settings -> Developer options. (above About device)
You need to enable OEM unlock, otherwise you might end up with boot problems or be unable to flash later on.
Make sure your don't have Factory Reset Protection enabled in your Google account or you may never be able to boot again!
More information: https://support.google.com/nexus/answer/6172890?hl=en
Extract Odin_3.10.7.zip to your computer.
Install Samsung Mobile Phone Drivers for Odin to find your device.
Download a .tar image of TWRP for j7xelte.
Reboot your device into Download mode. To do this, select reboot from the power menu and hold the [Volume Down] + [Home] buttons while your device reboots.
Once you reach the Download mode warning screen, press [Volume Up] to continue.
Open Odin and place that TWRP tar file in the [AP] slot, under Options tab disable Auto Reboot, then press [Start].
Once the flash is complete (Odin should tell you in the log, and progress bar on phone should stop), you can pull the battery then place the battery back in. Now hold [Volume Up] + [Home] + [Power] buttons until you reach recovery mode.
If you end up in stock recovery, start again from download mode step.
At this point, you will reach the screen asking you if you want to allow system modifications.
You will want to swipe to allow, otherwise the OS will replace TWRP once you boot!
If you want to be rooted with SuperSU:
Download the latest SuperSU by Chainfire.
Without exiting TWRP, transfer the SuperSU zip to your device over MTP* and flash it using [Install] in TWRP.
Go to [Reboot] -> [System].
* MTP, known as Media Transfer Protocol, is the same way you transfer files from your PC to your device when booted into system.
Click to expand...
Click to collapse
i have SM-J710FN. if I only follow below 3 steps, then will i b able to root my device ??
1. allow usb debugging and OEM unlock
2. flash official TWRP via Odin ... then re insert battery & reboot into TWRP
3. wipe data in TWRP and then falsh SuperSU via TWRP
is it enough.. Do I need to flash kernels first ??
Presenting the TWRP Recovery for Asus Zenfone Lite L1 (ZA551KL) (asus_x00r)(Treble Supported)(Encryption Fixed) Disclaimer : I am not responsible for any bricked device, all responsibility bears the user.
First Unlock Boot-loader using official asus ubl tool - Download UBL App
Team Win Recovery Project (TWRP) is the most famous custom recovery used by the people who like to flash custom roms, patches, flashable zips etc. The latest version is TWRP 3.2.3-0.
Flash zips through otg or Micro sd Cards as device is encrypted , if you format data and decry-pt then the Flashlight (torch) and the Camera will not Work.ENCRYPTION IS FIXED NOW
Installation By PC
1. Install fastboot tools - minimal adb and fastboot
2. Download twrp image and rename it as "twrp.img", then copy it to the Minimal ADB and Fastboot folder
3. Boot the device to fastboot mode - press and hold power button and volume down button
4. Connect device to pc
5. Open command prompt from Minimal ADB and Fastboot
6. Run command " fastboot flash recovery twrp.img "
7. Twrp will be flashed immediately
8. To boot in to twrp run " fastboot boot twrp.img " or disconnect device from pc and press and hold power button and volume up button
9. Device will be booted to twrp
NOW LETS DECRY-PT DATA
*Download the data Decrypt patch Zip :- Download
*Put it in otg (pendrive) or microsd card
*Then in twrp , Go to wipe section in twrp and tap on Format data (Important )
*Do not wipe data partiton , you have to format it
*then flash the Decrypt zip from your sdcard or pendrive
*after flashing wipe caches
*then reboot , and see camera and flashlight is working and Storage in Decrypted
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Join telegram group for updates
Downloads:-
1. Minimal Fastboot and Adb
2.TWRP_3.2.3.0_asus_lite_l1
3. Decrypt Patch Download
Device tree
Credits:
@Ashish Gupta1999 (me)
Tester - for testing a lot of builds time to time
if you like my work you can donate me also
Dose it support g cam portrait mode
Yes works fantastic(front cam)
Doesn't work for me. Anyone have a working root method for Asus zenfone live L1?
dexx121 said:
Doesn't work for me. Anyone have a working root method for Asus zenfone live L1?
Click to expand...
Click to collapse
Live l1 and lite l1 is a completely different devices
This TWRP actually partially works for Live L1 (ZA550KL, SD425). The problems are 1) it can't decrypt /data, 2) it fails to mount /xrom (which is inexistent on the Go variant) and 3) no ADB/MTP, but for flashing ROMs/addons, backing up and restoring, it works nicely. Just letting y'all know about it.
AndyYan said:
This TWRP actually partially works for Live L1 (ZA550KL, SD425). The problems are 1) it can't decrypt /data, 2) it fails to mount /xrom (which is inexistent on the Go variant) and 3) no ADB/MTP, but for flashing ROMs/addons, backing up and restoring, it works nicely. Just letting y'all know about it.
Click to expand...
Click to collapse
there is a specific twrp for live l1
Ashish Gupta1999 said:
there is a specific twrp for live l1
Click to expand...
Click to collapse
Can you link me to the one you know of? I just found another one from TWRP Builder, and it did fix most problems, but I still can't use decrypted data (shows "encryption unsuccessful" on boot). And it doesn't expose /vendor either which is a small letdown. <- Fixed by unpacking and editing recovery.fstab.
AndyYan said:
Can you link me to the one you know of? I just found another one from TWRP Builder, and it did fix most problems, but I still can't use decrypted data (shows "encryption unsuccessful" on boot). And it doesn't expose /vendor either which is a small letdown. <- Fixed by unpacking and editing recovery.fstab.
Click to expand...
Click to collapse
Contact me on telegram @yoursenpai1 i will provide you there
it works
Ashish Gupta1999 said:
Contact me on telegram @yoursenpai1 i will provide you there
Click to expand...
Click to collapse
Something gone wrong. System in boot loop. Able to load TWRP through PC. Tried to flash a new ROM but only 2 options (Boot & Recovery) available. Please help
Abhicr said:
Something gone wrong. System in boot loop. Able to load TWRP through PC. Tried to flash a new ROM but only 2 options (Boot & Recovery) available. Please help
Click to expand...
Click to collapse
All I know there is no rom for this device as of now , if you flash a gsi , it. Will definitely show system image option , for now flash stock rom using stock recovery to unbrick
Ashish Gupta1999 said:
All I know there is no rom for this device as of now , if you flash a gsi , it. Will definitely show system image option , for now flash stock rom using stock recovery to unbrick
Click to expand...
Click to collapse
I used a GSI to update from Oreo to Pie. But the TWRP has only 2 options (boot & Recovery) to flash the .img file. However, I did a restore & back with the old Oreo. I want to upgrade my Asus Lite 1 to Pie!! Is there any possibility to get the mobile back to the factory state including recovery? So, that I can begin from one.
Abhicr said:
I used a GSI to update from Oreo to Pie. But the TWRP has only 2 options (boot & Recovery) to flash the .img file. However, I did a restore & back with the old Oreo. I want to upgrade my Asus Lite 1 to Pie!! Is there any possibility to get the mobile back to the factory state including recovery? So, that I can begin from one.
Click to expand...
Click to collapse
Well there is a fastboot rom available in my telegram channel of lite l1 check in there
Accidentally deleted the OS and now the mobile isn't even switching on. Any solution for this? Anyway I can install an OS ?
My mobile is ASUS Zenfone Lite L1.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Official TWRP 3.6.1-* For Galaxy S10/e/+/5GOnly for exynos variants - G970F / G973F / G975F / G977B (Europe - Global, Single/Dual-SIM), G970N / G973N / G975N / G977N (South Korea)
Disclaimer
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed.
Please do some research if you have any concerns about features included in this recovery before flashing it!
YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
Kernel Features:
latest kernel source release
disabled uh/defex/proca/knox/rkp/rooting protection/logging/audit/useless features
spoofed config for firmware checks
Recovery Features:
built in full 64 mode
toybox/busybox support
compatible with Android 10.0 and above
Downloads:
S10e - beyond0lte - G970F/G970N
S10 - beyond1lte - G973F/G973N
S10+ - beyond2lte - G975F/G975N
S10 5G - beyondx- G970F/G977N
avb disabled vbmeta
Instructions:
Odin (Windows)
Prerequisites: Samsung USB drivers, Odin v3.14.1
If you already have the bootloader unlocked you can skip to step 6.
Make sure OEM Unlock is ON in developer settings;
Turn off the phone;
Use vol down + bixby key + usb cable plugged to a pc to start the phone in download mode;
Long press vol up then confirm you want to unlock bootloader (this is needed one time only);
* Please be aware all your data will be erased including internal storage and phone will reboot!!
Let the phone boot normally, pass the setup and connect to internet (wireless or mobile data) in order to unlock RMM;
Make sure OEM Unlock is ON in developer settings;
Turn off the phone;
Use vol down + bixby key + usb cable plugged to a pc to start the phone in download mode, short press vol up to confirm you want to go to download mode;
* If by any chance you see RMM state=Prenormal or KG state=Prenormal, redo from step 5!
Download appropriate TWRP .tar file according to your device
Download avb disabled vbmeta .tar
Open Odin v3.14.1 and place the downloaded TWRP .tar file in AP tab, downloaded vbmeta .tar file in CP tab and click Start - once you press start grab the phone and press vol up + bixby + power to force it boot straight in TWRP after flashing
!! Only if coming from full stock firmware
In TWRP home screen press wipe - format data - yes
Download and flash multidisabler-samsung-3.* zip to disable security and encryption.
Heimdall (Linux)
Install heimdall & additional required packages:
Code:
sudo apt-get update
sudo apt-get install heimdall-flash android-tools-fastboot android-tools-adb libusb-0.1-4 libusb-1.0-0 libusb-1.0-0-dev
If you already have the bootloader unlocked you can skip to step 6.
Make sure OEM Unlock is ON in developer settings;
Turn off the phone;
Use vol down + bixby key + usb cable plugged to a pc to start the phone in download mode;
Long press vol up then confirm you want to unlock bootloader (this is needed one time only);
* Please be aware all your data will be erased including internal storage and phone will reboot!!
Let the phone boot normally, pass the setup and connect to internet (wireless or mobile data) in order to unlock RMM;
Make sure OEM Unlock is ON in developer settings;
Turn off the phone;
Use vol down + bixby key + usb cable plugged to a pc to start the phone in download mode, short press vol up to confirm you want to go to download mode;
* If by any chance you see RMM state=Prenormal or KG state=Prenormal, redo from step 5!
Download appropriate TWRP .img file according to your device
Download avb disabled vbmeta .img
Open your preferred terminal in linux and type (replace red lines with the path of downloaded img files):
Code:
sudo heimdall flash --RECOVERY /path/to/recovery.img --VBMETA /path/to/vbmeta.img
and press enter - once you press enter grab the phone and press vol up + bixby + power to force it boot straight in TWRP after flashing
!! Only if coming from full stock firmware
In TWRP home screen press wipe - format data - yes
Download and flash multidisabler-samsung-3.* zip to disable security and encryption.
TWRP
Download .img file for your device and install from your current TWRP with Install image - browse to image location and select - Recovery
dd (Requires root)
Download .img file for your device, place it in the root of your /sdcard folder, rename it to twrp.img then run the following commands via adb shell or a terminal emulator app:
Code:
su
dd if=/sdcard/twrp.img of=/dev/block/platform/13d60000.ufs/by-name/recovery
!! Only if coming from full stock (magisk patched) firmware
In TWRP home screen press wipe - format data - yes
Download and flash multidisabler-samsung-3.* zip to disable security and encryption.
Sources:
Device trees - beyond0lte / beyond1lte / beyond2lte / beyondx
Kernel - https://github.com/corsicanu/android_kernel_samsung_universal9820/tree/android-9.0
Recovery - https://github.com/omnirom/android_bootable_recovery
Credits:
TeamWin, geiti94, jesec, dyneteve, ianmacd, testers, donors and anyone else involved in making this possible
As always, if you like what i do, you can always send me some pizza/coffee/drugs/drinks or anything else via paypal.me/corsicanu
Compatibility and changelog:
07.03.2022 - TWRP 3.6.1
Security patch: 2022-02-01
Compatibility: only GVA*/GVB* firmwares, OneUI 4.0
Spoiler: Archive
09.01.2022 - android 12 support
Security patch: 2022-01-01
Compatibility: only GUL* firmwares, OneUI 4.0
08.01.2021 - android 11 support
Security patch: 2020-12-01
Compatibility: only ETL* firmwares, OneUI 3.0
27.12.2020 - TWRP 3.5.0 bringup - december release
Security patch: 2020-12-01
Compatibility: only DTK* and DTL* firmwares
09.12.2020 - december release
Security patch: 2020-12-01
Compatibility: only DTK* and DTL* firmwares
05.12.2020 - Initial release
Security patch: 2020-11-01
Compatibility: DTJ* firmwares
Misc links:
TeamWin official website
Telegram Support Group
Telegram Channel
Bootloaders / modems zips
Latest Magisk stable or canary
Further reading:
Full guide of how to unlock/root your device
Patch TWRP with Magisk
Use recovery to boot up rooted
Background on Android Verified Boot
Rollback protection
FAQ
Q: Can i use this recovery with other firmware then mentioned in compatibility?
A: Only with same Android version and only if you don't plan to boot rooted with TWRP (some kernels deliver root prebuilt in kernel), or Rollback protection will kick in and you won't be able to pass the lockscreen.
Q: Where do i get vbmeta.img?
A: From here, download the one you need according to install instructions.
Q: TWRP can't mount data partition, what to do?
A: Make sure you formatted data partition.
Q: Phone is not booting even after 20 minutes
A: Try to reboot. If still not booting, make sure you flashed multidisabler zip / formatted data partition.
Q: How to format data partition?
A:
Q: Phone is showing only Samsung logo
A: Try to reboot. If still not booting, consider installing an older TWRP build or a more recent firmware. If you still don't succeed, post here some details about your device and previous firmware and we might be able to help.
Q: Why do i need to format data partition?
A: Because old firmware encrypted your data partition and new rom can't decrypt and use that content / root needs access to data partition to place misc files / phone not booting after flashing root until data partition gets formatted.
further reading moved to #2
Thanks for your work, good job
Amazing work as always Corsi, thank you so much!
Thanks Sir I'm fan of your hadesRom and I'll wait your new work//from Thailand
Well done as always
Great work as aways @corsicanu! Keep it up and don't worry about the others, OFFICIAL is yours, haters gonna hate...
Cheers!
Can I just flash this to recovery in ians twrp that I currently have?
Eidluci said:
Can I just flash this to recovery in ians twrp that I currently have?
Click to expand...
Click to collapse
What it says on the box...
If you already have TWRP installed, download .img file according to instructions from step 9 from above, and install from your current TWRP with Install image - browse to image location and select - Recovery
is this better than the ianmcd 3.4.0.3 TWRP?
r3xx3r said:
is this better than the ianmcd 3.4.0.3 TWRP?
Click to expand...
Click to collapse
My thoughts exactly!
For that matter, is it better than Modpunk's 3.4.0-0?
There are various custom ROM Modders stating use this (name) TWRP - all stating different TWRPs.
Presently we have 3 different Mods versions of TWRPs for the S10- family.
I, for one, have difficulty in seeing the difference between the TWRPs???
One is compatibility, two is ian's dropping the support.
Hi! I have problem with latest samsung firmware and twrp. I can get root and i can install twrp from 0. But recovery can't access data folder (sam folders with strange name) and multi disabler put the phone in a "stack at samsung logo" state! Why?
rubino25 said:
Hi! I have problem with latest samsung firmware and twrp. I can get root and i can install twrp from 0. But recovery can't access data folder (sam folders with strange name) and multi disabler put the phone in a "stack at samsung logo" state! Why?
Click to expand...
Click to collapse
You have to format /data to decrypt your device. Be aware that you'll loose all your data. Read FAQ, it includes all the info you need.
Cheers!
AndrzejDwo said:
You have to format /data to decrypt your device. Be aware that you'll loose all your data. Read FAQ, it includes all the info you need.
Cheers!
Click to expand...
Click to collapse
Thanks!
Norup58 said:
My thoughts exactly!
For that matter, is it better than Modpunk's 3.4.0-0?
There are various custom ROM Modders stating use this (name) TWRP - all stating different TWRPs.
Presently we have 3 different Mods versions of TWRPs for the S10- family.
I, for one, have difficulty in seeing the difference between the TWRPs???
Click to expand...
Click to collapse
If you're not using any modpunk rom (such as his LineageOS) - you'll need to use his twrp - no way around that. - it's really not recommended if you want to run any of the ROMs besides that as it'll likely not work.
Ianmcd twrp is best used on any rom/fw below DTI8 (so anything from DTH7 and below) - This is losing support soon and no longer will be updated.
(tldr: unless you're planning to use my crdroid 7, Ivan's lineage 18 or latest 17.1 - I recommend you keep to this twrp until other roms are updated)
This twrp here (corsicanu) is now the recommended twrp from now on as long as you're on DTI8 or above and flashing DTI8 based roms.
Official builds are up, updated the links and the instructions, read carefully everything before you brick your phone.
Congrats @corsicanu. As always, quality work. Keep it up mate. ??
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Official TWRP 3.6.1-* For Galaxy Note 10/+/5GOnly for exynos variants - N970F / N975F / N976B (Europe - Global, Single/Dual-SIM), N971N, N976N (South Korea)
Disclaimer
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed.
Please do some research if you have any concerns about features included in this recovery before flashing it!
YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
Kernel Features:
latest kernel source release
disabled uh/defex/proca/knox/rkp/rooting protection/logging/audit/useless features
spoofed config for firmware checks
Recovery Features:
built in full 64 mode
toybox/busybox support
compatible with Android 10.0 and above
Downloads:
Note 10 - d1 - N970F
Note 10 5G - d1x - N971N
Note 10+ - d2s - N975F
Note 10+ 5G - d2x - N976B/N976N
avb disabled vbmeta
Instructions:
Odin (Windows)
Prerequisites: Samsung USB drivers, Odin v3.14.1
If you already have the bootloader unlocked you can skip to step 6.
Make sure OEM Unlock is ON in developer settings;
Turn off the phone;
Use vol up + vol down + usb cable plugged to a pc to start the phone in download mode;
Long press vol up then confirm you want to unlock bootloader (this is needed one time only);
* Please be aware all your data will be erased including internal storage and phone will reboot!!
Let the phone boot normally, pass the setup and connect to internet (wireless or mobile data) in order to unlock RMM;
Make sure OEM Unlock is ON in developer settings;
Turn off the phone;
Use vol up + vol down + usb cable plugged to a pc to start the phone in download mode, short press vol up to confirm you want to go to download mode;
* If by any chance you see RMM state=Prenormal or KG state=Prenormal, redo from step 5!
Download appropriate TWRP .tar file according to your device
Download avb disabled vbmeta .tar
Open Odin v3.14.1 and place the downloaded TWRP .tar file in AP tab, downloaded vbmeta .tar file in CP tab and click Start - once you press start grab the phone and press vol up + power to force it boot straight in TWRP after flashing
!! Only if coming from full stock firmware
In TWRP home screen press wipe - format data - yes
Download and flash multidisabler-samsung-3.* zip to disable security and encryption.
Heimdall (Linux)
Install heimdall & additional required packages:
Code:
sudo apt-get update
sudo apt-get install heimdall-flash android-tools-fastboot android-tools-adb libusb-0.1-4 libusb-1.0-0 libusb-1.0-0-dev
If you already have the bootloader unlocked you can skip to step 6.
Make sure OEM Unlock is ON in developer settings;
Turn off the phone;
Use vol up + vol down + usb cable plugged to a pc to start the phone in download mode;
Long press vol up then confirm you want to unlock bootloader (this is needed one time only);
* Please be aware all your data will be erased including internal storage and phone will reboot!!
Let the phone boot normally, pass the setup and connect to internet (wireless or mobile data) in order to unlock RMM;
Make sure OEM Unlock is ON in developer settings;
Turn off the phone;
Use vol up + vol down + usb cable plugged to a pc to start the phone in download mode, short press vol up to confirm you want to go to download mode;
* If by any chance you see RMM state=Prenormal or KG state=Prenormal, redo from step 5!
Download appropriate TWRP .img file according to your device
Download avb disabled vbmeta .img
Open your preferred terminal in linux and type (replace red lines with the path of downloaded img files):
Code:
sudo heimdall flash --RECOVERY /path/to/recovery.img --VBMETA /path/to/vbmeta.img
and press enter - once you press enter grab the phone and press vol up + power to force it boot straight in TWRP after flashing
!! Only if coming from full stock firmware
In TWRP home screen press wipe - format data - yes
Download and flash multidisabler-samsung-3.* zip to disable security and encryption.
TWRP
Download .img file for your device and install from your current TWRP with Install image - browse to image location and select - Recovery
dd (Requires root)
Download .img file for your device, place it in the root of your /sdcard folder, rename it to twrp.img then run the following commands via adb shell or a terminal emulator app:
Code:
su
dd if=/sdcard/twrp.img of=/dev/block/platform/13d60000.ufs/by-name/recovery
!! Only if coming from full stock (magisk patched) firmware
In TWRP home screen press wipe - format data - yes
Download and flash multidisabler-samsung-3.* zip to disable security and encryption.
Sources:
Device trees - d1 / d1x / d2s / d2x
Kernel - https://github.com/corsicanu/android_kernel_samsung_universal9820/tree/android-9.0
Recovery - https://github.com/omnirom/android_bootable_recovery
Credits:
TeamWin, geiti94, jesec, dyneteve, ianmacd, testers, donors and anyone else involved in making this possible
As always, if you like what i do, you can always send me some pizza/coffee/drugs/drinks or anything else via paypal.me/corsicanu
Compatibility and changelog:
07.03.2022 - TWRP 3.6.1
Security patch: 2022-02-01
Compatibility: only GVA*/GVB* firmwares, OneUI 4.0
Spoiler: Archive
09.01.2022 - android 12 support
Security patch: 2022-01-01
Compatibility: only GUL* firmwares, OneUI 4.0
08.01.2021 - android 11 support
Security patch: 2020-12-01
Compatibility: only ETL* firmwares, OneUI 3.0
27.12.2020 - TWRP 3.5.0 bringup - december release
Security patch: 2020-12-01
Compatibility: only DTK* and DTL* firmwares
09.12.2020 - december release
Security patch: 2020-12-01
Compatibility: only DTK* and DTL* firmwares
05.12.2020 - Initial release
Security patch: 2020-11-01
Compatibility: DTJ* firmwares
Misc links:
TeamWin official website
Telegram Support Group
Telegram Channel
Bootloaders / modems zips
Latest Magisk stable or canary
Further reading:
Full guide of how to unlock/root your device
Patch TWRP with Magisk
Use recovery to boot up rooted
Background on Android Verified Boot
Rollback protection
FAQ
Q: Can i use this recovery with other firmware then mentioned in compatibility?
A: Only with same Android version and only if you don't plan to boot rooted with TWRP (some kernels deliver root prebuilt in kernel), or Rollback protection will kick in and you won't be able to pass the lockscreen.
Q: Where do i get vbmeta.img?
A: From here, download the one you need according to install instructions.
Q: TWRP can't mount data partition, what to do?
A: Make sure you formatted data partition.
Q: Phone is not booting even after 20 minutes
A: Try to reboot. If still not booting, make sure you flashed multidisabler zip / formatted data partition.
Q: How to format data partition?
A:
Q: Phone is showing only Samsung logo
A: Try to reboot. If still not booting, consider installing an older TWRP build or a more recent firmware. If you still don't succeed, post here some details about your device and previous firmware and we might be able to help.
Q: Why do i need to format data partition?
A: Because old firmware encrypted your data partition and new rom can't decrypt and use that content / root needs access to data partition to place misc files / phone not booting after flashing root until data partition gets formatted.
official builds will be up in few hours
Nice, congrats!
Hi, i'm getting the Note 10 soon & remember when i've tested the S10 months ago that i had trouble with twrp encryption/decryption : can you confirm after wiping data that you can encrypt it (system) and twrp will be able to decrypt it after you enter your pattern..? Thanks.
Android 11 TWRP is up already for a while, in case you didn't notice it yet grab it from twrp.me.
Don't forget to use targeted TWRP for your android version and release, read more about compatibility in second post of this thread.
PS: N971N does not have a build compatible with OneUI 3.0 since no public release of that yet, it will be built once samsung starts pushing the update for that phone.
Regards!
corsicanu said:
Android 11 TWRP is up already for a while, in case you didn't notice it yet grab it from twrp.me.
Don't forget to use targeted TWRP for your android version and release, read more about compatibility in second post of this thread.
PS: N971N does not have a build compatible with OneUI 3.0 since no public release of that yet, it will be built once samsung starts pushing the update for that phone.
Regards!
Click to expand...
Click to collapse
is the latest TWRP 3.5.0_9-4-d1 compatible with the latest Samsung ROM update? Below are the details of the firmware update I'm referring to:
ModelSM-N970FModel nameGalaxy Note 10VersionAndroid 11Changelist21054212Build dateThu, 18 Feb 2021 05:15:51 +0000Security Patch Level2021-03-01Product codeXTCPDAN970FXXU6FUBDCSCN970FOXM6FUBD
Thanks in advance!
Edit: based on this article it's One UI 3.1
Hi,
Is this method works and safe for N971N?
Android 12
nilofino said:
Hi,
Is this method works and safe for N971N?
Android 12
Click to expand...
Click to collapse
Actually I tried and it works
Is it safe after installing TWRP to RE-LOCK the bootloader???
tried using with android 12 trough magisk and i got phone blocked on samsung logo, also i was unable to select storage on wipe menu, any insight?
nilofino said:
Actually I tried and it works
Click to expand...
Click to collapse
HOW?!
I have the same SM-N971N, but I Got the error of showing less storage than it has after flashing. Like, -192GB/60GB and in settings it shows 16GB, Constantly says the TA Downloader has stopped.
So it messed up totally in my case ; and i reverted back
So Help me how did you managed?!
Rafin Rahman said:
HOW?!
I have the same SM-N971N, but I Got the error of showing less storage than it has after flashing. Like, -192GB/60GB and in settings it shows 16GB, Constantly says the TA Downloader has stopped.
So it messed up totally in my case ; and i reverted back
So Help me how did you managed?!
Click to expand...
Click to collapse
Just follow the instructions!
It seems that you have selected "repartition" option (in odin options),
You can find the solution easly. Maybe installing the stock Rom helps, but plz search for the solution before doing any further actions
nilofino said:
Just follow the instructions!
It seems that you have selected "repartition" option (in odin options),
You can find the solution easly. Maybe installing the stock Rom helps, but plz search for the solution before doing any further actions
Click to expand...
Click to collapse
No to be honest, i never messed with that part lol
But if it really is how you say, then let me try this pain once again :")
nilofino said:
Just follow the instructions!
It seems that you have selected "repartition" option (in odin options),
You can find the solution easly. Maybe installing the stock Rom helps, but plz search for the solution before doing any further actions
Click to expand...
Click to collapse
can you help me finding the twrp flashable zip for N9710N?
I used the original one from official website
Rafin Rahman said:
can you help me finding the twrp flashable zip for N9710N?
Click to expand...
Click to collapse
nilofino said:
I used the original one from official website
Click to expand...
Click to collapse
OK I DID IT! But man, twrp got installed, but no magisk, nothing is installing/flashing via TWRP, idk whyy!! :")
Maybe its android 12 thats causing problem
It did successfully installed TWRP as Custom Recovery, but as for superuser, Im handcuffed now , Sed Lyf:")
Intento instalar Twrp junto con Vbmate en mi N971N y me tira este error y si solo instalo Twrp no pasa del logo de Samsung
Thank you for your hardwork!