Related
I have an ASUS Fonepad 7 ME372CG (Real name is K00E) with CN SKU.
the reason to flash my K00E is that it’s a Chinese (Not HongKong or Taiwan) version.
Chinese GOV is so evil that cut and block all Google staff in all Chinese Android phones. and make it very hard to install Google Back.
I’ve tried all kinds of method to install google apps on my CN K00E and bricked it.
After a few days of search. I’ve found a way to flash this CN K00E (without Google) to WW K00E (With google) and rooted.
========Here is how=========
------Things you will need ------
1. Download ASUS ZIP ROM here
http://support.asus.com/Download.aspx?SLanguage=en&m=ASUS+Fonepad+7
ASUS Fonepad 7 (ME372CG) Software Image Version: WW_V7.4.1 (Android 5.0) For WW SKU only
THIS ZIP file can’t be flashed when your phone is bricked. This ZIP file is for system update when your system is still alive.
2. Download ASUS RAW ROM
http://forum.xda-developers.com/showthread.php?t=2709256
Choose the version match your ZIP ROM
THIS RAW file can be flashed when your device is bricked. (except your boot loader should work)
3. Get a MicroSD card with 8GB or more space.
4. Download this Intel Tethered Temp Recovery
http://forum.xda-developers.com/android/development/intel-android-devices-root-temp-cwm-t2975096
IntelAndroid-FBRL-07-24-2015.7z
5. Setup your PC with ADB and Fastboot
6. Install Intel Android USB Driver into your windows
7. Download the root manager app with can be flashed into your phone later from
https://download.chainfire.eu/696/SuperSU/
———STEPs-----
——Phase 1 Flash your K00E to WW version or you can use this Phase to unbrick your phone or just for upgrade to latest rom----
—— SKIP this if you have a NON-Chinese or Alive Phone-----
ASUS may tell you that you should flash the ROM with same SKU match your device SKU
but you still have a chance to flash a different SKU ROM and it may work!
I’ve tested WW SKU ROM on my CN SKU Device. it worked.
1.Unzip the ZIP rom from ASUS you will get 2 img files in the rom
droidboot.img for fastboot and boot.img for boot
2. connect the usb cable to the phone. switch off the phone.
3. copy the raw ROM file to the root of the MicroSD Card. and insert into the phone.
4. Power UP the phone with vol up pressed Down to enter fastboot/droidboot mode.
5. issue command from PC
fastboot flash boot boot.img
fastboot flash fastboot droidboot.img
fastboot reboot-bootloader
6. phone will reboot by your last command
7. Choose "SD Download"
8. Wait 15 - 20 Minutes
9. Now you have a NON-Chinese Phone with Google with latest version ASUS could provide just like a normal android phone.
—— Phase 2 ROOT the Phone with Android 5.0 ----
1. Put your root app (zip file) into your root folder of the SDCard or External SDCard.
2..Reboot the phone with Vol UP pressed. and boot into the fastboot mode.
3. Connect PC and Launch the Tethered Temp Recovery you just downloaded before.
4. Type ACCEPT (UP Case), choose 5 (CWM), them choose T2
5. wait about 10 seconds your CMW Recovery should be launched upside down
6. choose update zip from SDCARD and choose the file you just put in.
7. flash it reboot and enjoy.
Will try this, thanks ?
beterhans said:
I have an ASUS Fonepad 7 ME372CG (Real name is K00E) with CN SKU.
the reason to flash my K00E is that it’s a Chinese (Not HongKong or Taiwan) version.
Chinese GOV is so evil that cut and block all Google staff in all Chinese Android phones. and make it very hard to install Google Back.
I’ve tried all kinds of method to install google apps on my CN K00E and bricked it.
After a few days of search. I’ve found a way to flash this CN K00E (without Google) to WW K00E (With google) and rooted.
========Here is how=========
------Things you will need ------
1. Download ASUS ZIP ROM here
http://support.asus.com/Download.aspx?SLanguage=en&m=ASUS+Fonepad+7
ASUS Fonepad 7 (ME372CG) Software Image Version: WW_V7.4.1 (Android 5.0) For WW SKU only
THIS ZIP file can’t be flashed when your phone is bricked. This ZIP file is for system update when your system is still alive.
2. Download ASUS RAW ROM
http://forum.xda-developers.com/showthread.php?t=2709256
Choose the version match your ZIP ROM
THIS RAW file can be flashed when your device is bricked. (except your boot loader should work)
3. Get a MicroSD card with 8GB or more space.
4. Download this Intel Tethered Temp Recovery
http://forum.xda-developers.com/android/development/intel-android-devices-root-temp-cwm-t2975096
IntelAndroid-FBRL-07-24-2015.7z
5. Setup your PC with ADB and Fastboot
6. Install Intel Android USB Driver into your windows
7. Download the root manager app with can be flashed into your phone later from
https://download.chainfire.eu/696/SuperSU/
———STEPs-----
——Phase 1 Flash your K00E to WW version or you can use this Phase to unbrick your phone or just for upgrade to latest rom----
—— SKIP this if you have a NON-Chinese or Alive Phone-----
ASUS may tell you that you should flash the ROM with same SKU match your device SKU
but you still have a chance to flash a different SKU ROM and it may work!
I’ve tested WW SKU ROM on my CN SKU Device. it worked.
1.Unzip the ZIP rom from ASUS you will get 2 img files in the rom
droidboot.img for fastboot and boot.img for boot
2. connect the usb cable to the phone. switch off the phone.
3. copy the raw ROM file to the root of the MicroSD Card. and insert into the phone.
4. Power UP the phone with vol up pressed Down to enter fastboot/droidboot mode.
5. issue command from PC
fastboot flash boot boot.img
fastboot flash fastboot droidboot.img
fastboot reboot-bootloader
6. phone will reboot by your last command
7. Choose "SD Download"
8. Wait 15 - 20 Minutes
9. Now you have a NON-Chinese Phone with Google with latest version ASUS could provide just like a normal android phone.
—— Phase 2 ROOT the Phone with Android 5.0 ----
1. Put your root app (zip file) into your root folder of the SDCard or External SDCard.
2..Reboot the phone with Vol UP pressed. and boot into the fastboot mode.
3. Connect PC and Launch the Tethered Temp Recovery you just downloaded before.
4. Type ACCEPT (UP Case), choose 5 (CWM), them choose T2
5. wait about 10 seconds your CMW Recovery should be launched upside down
6. choose update zip from SDCARD and choose the file you just put in.
7. flash it reboot and enjoy.
Click to expand...
Click to collapse
Thanks for giude for root it,
So i've trouble now: How to restart to CWM (recovery) when i finish install CWM and flash SuperUser on my fonepad. (My English so bad... )
Thanks again,
that is awesome!!!
I just follow it and can use google service now. thanks a lot.
dex2oat really takes long time while upgrading...
How To Change Position Of Clock On Lock Screen
https://www.youtube.com/watch?v=FYcOlhwUW74
How To Change Style Of Clock On Lock Screen
https://www.youtube.com/watch?v=i-Uw_tBxIL0
If u thing its Good So Please Guys Suscribe.Like.Comment
Failed
T2 . launch using oem backup_factory trigger
Result: Unknown OME command
FAILED !!!!:crying::crying:
So I upgraded my Fonepad to Android 5 and lost my root.
After hours of searching how to get it back and getting nowhere fast I found your guide, you're a genius. I only needed phase 2, but it installed SuperSU exactly as you described. Thank you, it's very much appreciated, so much so that I just joined the forum purely to thank you
All the best
Ty
great guide BUT....
I only needed the second part to root my K00E ver7.4.1 using tethered recovery,,,
but after installing superSU and select reboot, CWM says: root lost? Fix now?
I tried both options ( yes ,No) but NO luck
after reboot I only have superSU installed and no root access
any thoughts?
thanks.
I have this version installed UL-K00E-WW-7.6.0.0-user it's the last WW update from Asus for this phone can I still root it as I've tried Kingo Iroot etc and nothing works I need root to move apps to SD card as I've no room.
UPDATE TO THE MOST RECENT VERSIONS NUGAT AND OREO
FLASHING METHOD
Hello with all, I introduce myself I am catuv21 I enter this beautiful community and I have made roms for the huawei P9lite 2016, today I will leave these works for this great terminal Huawei P10lite thanks to a community of technicians that having seen my work for Pllite, they sent me a P10lite bluish, to which I am grateful and will be presenting works in this community, such as roms MidgarD (modified cover stock), MorfuZ (based on kangvip), and others.
HTML:
- An advert! The Flash phone can have bricks. I'm not responsible for that:p:p.
- If you are not sure, do not make any changes and you can leave this forum:confused::confused:.
- This method uses a modified stock recovery that does not verify the files.
- It serves to update firmware, as well as update to Oreo, but not to do Downgrade Nougat.
- also serves to perform rebrand changing cust.
- make copies of data and applications.
- I will not explain how to unlock the bootloader and install twrp, there are many tutorials.
- with this method the bootloader will be blocked again.
EXPERIENCE
- my compilation was WAS-LX3C605B172 and update to WAS-LX3C605B186 (demo video)
- being in WAS-LX3C605B186 I changed from cust REBRAND, to compilation WAS-LX1C432B208 (demo video)
- finally being in WAS-LX1C432B208 UPDATE FLASH WAS-LX1C432B321 (8.0.0.321) (demo video)
REQUIREMENTS:
- activate OEM unlocking from developer options.
- Unlock the bootloader.
- install recovery twrp P10 lite nougat
- download the firmware finder.exe to download the updates
- download the firmware of your compilation and / or rebrand compilation
- Download the HWOTA file and unzip.
- minimum battery of 50%
PROCESS.
FLASH UPDATE
- unzip the file HWOTA.zip
- download the firmware of your compilation (settings / about the phone)
- the firmware is three files in the update.zip, update_data_full_public.zip and update_full_XX-LXX_hw_xx
- the latter "update_full_XX-LXX_hw_xx" there are usually several L21, L01, etc. just download one and it will depend on the cell model.
- If there are not three, it does not work.
- Rename the firmware as follows : update.zip, update_data_public.zip, update_all_hw.zip
- copy and paste the renamed files into the "HWOTA" directory.
- the HWOTA folder, copy and paste in the external memory.
- turn off the cell phone and boot in recovery twrp.
- change to external memory.
- find the HWOTA folder and flash the OTA_catuva21.zip file
- the cell phone will automatically restart
- and start updating let it finish
- if for some reason it remains on the black screen, or sticks to the huawei logo
- perform hard reset (press the volume more and power, and perform both wipes)
- CONGRATULATIONS UPDATE YOUR ANDROID.
REBRAND
- unzip the file HWOTA.zip
- download the "WAS-L ... C ... oeminfo.zip" (it's a flasheable file)
- download the firmware, this depends on the brand you want to change "WAS-L ... C ... oeminfo.zip"
- rename updates: follow steps 3 to 8 of FLASH UPDATE
- Create a folder in the external memory and paste the "WAS-L ... C ... oeminfo.zip" of your selection.
- turn off the cell phone and boot in recovery twrp.
- change to external memory.
- search the folder oeminfo and flash "WAS-L ... C ... oeminfo.zip"
- DANGER DANGER:crying::crying:
- when finished flashing DO NOT REALIZE REBOOT SYSTEM
- return to the main screen.
- select reebot.
- select bootloader and automatically restart in fastboot mode.
- and as you will see the bootloader is blocked.
- unlock the bootloader with your code (if it is in red, just unlock)
- once unlocked it will boot in recovery twrp.
- search the HWOTA folder
- find the HWOTA folder and flash the OTA_catuva21.zip file
- the cell phone will automatically restart
- and start updating let it finish
- if for some reason it remains on the black screen, or sticks to the huawei logo
- perform a hard reset (press the volume more and power until the wipes menu appears)
- CONGRATULATIONS UPDATE YOUR ANDROID .
CREDITS
CATUVA21 (to be adapted for this terminal)
Idrees Patel (take your night recovery, and adapt)
mankindtw (use your flash method that I publish for high ranges)
FirmwareFinder (for publishing the updates)
GOOD LINK OF THE BASE OF THIS WORK
[Guide] Mate 9 Flash Oreo Update Package and Downgrade Nougat
https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-oreo-update-package-t3699522
Huawei P8 Lite 2017 / Honor 8 Lite Android Oreo update brings Project Treble support
https://www.xda-developers.com/huaw...e-android-oreo-update-project-treble-support/
Removed
at the moment there are only two oeminfo flas
WAS-LX1C432 dual sim
WAS-LX3C605 dual sim
You can share your message to make it flashable.
Removed
CATUVA21 said:
UPDATE TO THE MOST RECENT VERSIONS NUGAT AND OREO
FLASHING METHOD
Hello with all, I introduce myself I am catuv21 I enter this beautiful community and I have made roms for the huawei P9lite 2016, today I will leave these works for this great terminal Huawei P10lite thanks to a community of technicians that having seen my work for Pllite, they sent me a P10lite bluish, to which I am grateful and will be presenting works in this community, such as roms MidgarD (modified cover stock), MorfuZ (based on kangvip), and others.
HTML:
- An advert! The Flash phone can have bricks. I'm not responsible for that:p:p.
- If you are not sure, do not make any changes and you can leave this forum:confused::confused:.
- This method uses a modified stock recovery that does not verify the files.
- It serves to update firmware, as well as update to Oreo, but not to do Downgrade Nougat.
- also serves to perform rebrand changing cust.
- make copies of data and applications.
- I will not explain how to unlock the bootloader and install twrp, there are many tutorials.
- with this method the bootloader will be blocked again.
EXPERIENCE
- my compilation was WAS-LX3C605B172 and update to WAS-LX3C605B186 (demo video)
- being in WAS-LX3C605B186 I changed from cust REBRAND, to compilation WAS-LX1C432B208 (demo video)
- finally being in WAS-LX1C432B208 UPDATE FLASH WAS-LX1C432B321 (8.0.0.321) (demo video)
REQUIREMENTS:
- activate OEM unlocking from developer options.
- Unlock the bootloader.
- install recovery twrp P10 lite nougat
- download the firmware finder.exe to download the updates
- download the firmware of your compilation and / or rebrand compilation
- Download the HWOTA file and unzip.
- minimum battery of 50%
PROCESS.
FLASH UPDATE
- unzip the file HWOTA.zip
- download the firmware of your compilation (settings / about the phone)
- the firmware is three files in the update.zip, update_data_full_public.zip and update_full_XX-LXX_hw_xx
- the latter "update_full_XX-LXX_hw_xx" there are usually several L21, L01, etc. just download one and it will depend on the cell model.
- If there are not three, it does not work.
- Rename the firmware as follows : update.zip, update_data_public.zip, update_all_hw.zip
- copy and paste the renamed files into the "HWOTA" directory.
- the HWOTA folder, copy and paste in the external memory.
- turn off the cell phone and boot in recovery twrp.
- change to external memory.
- find the HWOTA folder and flash the OTA_catuva21.zip file
- the cell phone will automatically restart
- and start updating let it finish
- if for some reason it remains on the black screen, or sticks to the huawei logo
- perform hard reset (press the volume more and power, and perform both wipes)
- CONGRATULATIONS UPDATE YOUR ANDROID.
REBRAND
- unzip the file HWOTA.zip
- download the "WAS-L ... C ... oeminfo.zip" (it's a flasheable file)
- download the firmware, this depends on the brand you want to change "WAS-L ... C ... oeminfo.zip"
- rename updates: follow steps 3 to 8 of FLASH UPDATE
- Create a folder in the external memory and paste the "WAS-L ... C ... oeminfo.zip" of your selection.
- turn off the cell phone and boot in recovery twrp.
- change to external memory.
- search the folder oeminfo and flash "WAS-L ... C ... oeminfo.zip"
- DANGER DANGER:crying::crying:
- when finished flashing DO NOT REALIZE REBOOT SYSTEM
- return to the main screen.
- select reebot.
- select bootloader and automatically restart in fastboot mode.
- and as you will see the bootloader is blocked.
- unlock the bootloader with your code (if it is in red, just unlock)
- once unlocked it will boot in recovery twrp.
- search the HWOTA folder
- find the HWOTA folder and flash the OTA_catuva21.zip file
- the cell phone will automatically restart
- and start updating let it finish
- if for some reason it remains on the black screen, or sticks to the huawei logo
- perform a hard reset (press the volume more and power until the wipes menu appears)
- CONGRATULATIONS UPDATE YOUR ANDROID .
CREDITS
CATUVA21 (to be adapted for this terminal)
Idrees Patel (take your night recovery, and adapt)
mankindtw (use your flash method that I publish for high ranges)
FirmwareFinder (for publishing the updates)
Click to expand...
Click to collapse
This is bad instruction. My HwOTA will rename the files of firmware automatically. Rebrend works in hwota, no need to flash "WAS-L ... C ... oeminfo.zip"
Can i use it to change from an android 7 custom rom to the official android 7 emui?
Mapl3x said:
Can i use it to change from an android 7 custom rom to the official android 7 emui?
Click to expand...
Click to collapse
yes you can, but my test was from a modified emui rom, but not from aosp
it worked
CATUVA21 said:
yes you can, but my test was from a modified emui rom, but not from aosp
Click to expand...
Click to collapse
it worked, now you have an official test who proves it works, thanks a lot
Mapl3x said:
it worked, now you have an official test who proves it works, thanks a lot
Click to expand...
Click to collapse
thanks to you for doing it, now you can return to emui.
After i go from cm to official emui 5.1, i forced the update to 8.0.0 using hwota,but my phone serial is still the emui 5.1 serial, what i need to do? Can i change it manually? (I have root)
(During the update it was an error but after the reboot and the low factory reset it work)
Worked!
OMG. It worked on WAS-LX21C432 EMUI 5.1.1!!! Thank you very much. Also I have a question. Can I make "how to install" video? Thank you
Can i flash oreo update from c432b198 build
Thread closed until download links are available that are not pay per click.
Edit: Thread reopened.
THIS THREAD IS FOR KOREAN VARIANT LG V30 TO GET THE SIGNAL
MODEL SUPPORTED : V300S, V300L V300K
FOLLOW THE GUIDE BELOW AND DONT MESS UP.
DONT DO ANY EXTRA STEP THAT IS NOT MENTION HERE.
WE WILL NOT HOLD ANY RESPONSIBLE IF YOUR DEVICE GO INTO WORLD WAR OR BOOM OR BRICK OR WHATEVER.
THANKS TO : @TxanMoe to found out how to root for most lgv30
: @ChazzMatt to guide everyone on the main thread
: @bilong9 to help Korean variant to get signal back
: @darkidz555 to whatever haha
To everyone if I forget mention please let me know
You need to enter the different boot menus (mainly factory data reset menu and fastboot menu) many times, so I just have notes here on the top of how it should happen
- Download mode
How to enter : Device power is off, hold volume up -> insert usb cable -> should go to download mode
- Factory data reset menu
Hold Power button and volume down button when boot starts. After some seconds (when phone vibrates or LG logo is visible) let go of power button for 1 second, and then click power button. (This caused me the most headaches, as if I were holding the buttons for too long, the device would cut power and reboot)
fastboot mode
- when device is shut down and without usb cable, hold volume down button for few seconds and plug in usb cable
--------------------------------------------------------------
First, Download files:
- LGup V30DLL_PATCHED
https://drive.google.com/file/d/1zvp...K5KjAQYm5/view
- LGup needs you to install download LG Mobile drivers
http://tool.cdn.gdms.lge.com/dn/down...=UW00120120425
- kdz H930
https://drive.google.com/file/d/1CbK...idtexwrXw/view
- kdz Us988
https://drive.google.com/file/d/151T...ztduIF_H5/view
- Adb.unlock.twrp.root
https://drive.google.com/file/d/1SvX...Myl199nwD/view
Depending on your variant (v300k / v300s / v300L) download one of the following files:
- For v300k: Rom zip v300k_21e (twrp) Rom running on us998 platform
https://drive.google.com/file/d/1DSC...m8skDBfty/view
OR
- For v300s & v300L: Rom zip v300s_21e (twrp) Rom running on us998 platform
https://drive.google.com/file/d/12wH...E6hXS7blr/view
Move files to microSD card of the phone
- Rom_LGv30_V300s_v21e_Oreo_full_stock.zip ( pick your variant )
- 1Magisk-v16.0.zip
- 2no-verity-opt-encrypt-6.0.zip
- 3lg-rctd-disabler-1.0.zip
Enable developer settings on Android settings
On Developer options
- Enable OEM unlock
- Enable USB Debugging
Connect Device to PC with USB. For me the usb mode had to be File Transfer (I read somewhere that it had to be Photo transfer, but that did not work with LGUP.exe for me
Start LGUP.exe
- If popup "Cant find handset", plug out and in usb on the phone.
- If popup "LGUP can't load the model[C:\Program Files(x86)\LG Electronics\LGUP\..." then create that LGUP folder and copy the model folder to it from LGUP V30DLL_PATCHED folder
- Choose PARTITION DL
- Select file H93020d_00_OPEN_EU_OP_0326.kdz
- Press Start
- From Partition List, tick Select All and press OK
- Phone will reboot to the flash menu
- LGUP_common popup will appear about Partition(s) changed "cache" etc. Press Yes
- Wait for it to finish
- When finished, and screen disappears, immediately hold both power and volume down button, when lg screen appears, stop pressing power button for 1 second, and then click power button once (If you don't time it right, you get stuckin LG life's good screen. Try again by holding volume down and power button for 8 seconds and device restarts)
- In Factory data reset menu delete all.
- Device will boot to android Setup
Setup Android
- Go through the setup steps
- Enable developer settings on Android settings
On Developer options
- Enable OEM unlock
- Enable USB Debugging
On computer, open cmd-here.exe
- enter command to check if device is found: adb devices
- enter command: adb reboot bootloader
- enter command: fastboot getvar all
- From the output: unlocked:no
- enter command: fastboot flash unlock unlock.bin
- Output will say "Failed (remote: Error!! Wrong unlock key size)", don't mind that
- Press Power button
- You will see error message on the device, hold volume down button until you can hear usb connection sound from computer (?)
- Device will boot
- Once booted, shutdown from android menu
- remove usb cable
- Enter download mode by holding Volume up button and then insert usb cable
Open LGUP.exe
- Choose PARTITION DL
- Select US99820a_04_0330.kdz
- Press Start
- From partition list, tick Select all and Ok
- Partition changed popup: press ok.
- As soon as it is done and screen goegoes black, Hold volume down and power button. when LG v30 screen is visible, let go of power button for 1 second, and then click power button.
- Erase all to factory settings
- Let device boot. As soon as it is booted, shut down android from menu
- When shut down, it starts to reboot, press volume down for few seconds to enter fastboot menu
In fastboot menu
- open cmd-here.exe again.
- Enter command: fastboot getvar all
- Output should now say "unlocked:yes"
- Enter command: fastboot flash recovery TWRP-3.2.1-joan-v0.1.img
- Output should say: "Ok"
- shutdown device by pressing power button. After power off, start holding powerbutton and volumedown button to enter Factory data reset menu. When logo appears or phone vibrates let go of power button, and after 1 second tap power button. Reset all
- Device should go to TWRP
- If device booted to Android, TWRP needs to be flashed again ( Do steps: turn of from power menu, enter fastboot menu, flash TWRP from command line, enter Factory reset on first boot and delete everything ).
In TWRP
- First press Cancel (on Mount: Decrypt Data screen)
- Swipe to Allow Modifications
- press Wipe
- press Format Data
- type: Yes
- Press Check on keyboard
- Output Data Format Complete
- Press back to get to Wipe screen
- Swipe to Factory Reset
- press Back and choose Advanced Wipe
- Tick: Dalvik / ART Cache, System, data, cache
- Swipe to Wipe
- Press home button
Take backup of stuff
press Install on TWRP home:
- Locate files that were copied to microsd card before
- If files are not on microSD card, they can be copied from computer using command: adb push localfile destination
(f.e: adb push Rom_LGv30_V300k_v21e_Oreo_full_stock_v1.zip /external_sd )
- Choose Rom_LGv30_V300k_v21e_Oreo_full_stock_v1.zip (or your variant)
- Swipe to confirm Flash
- Wait until finished
- Output should say: "Zip succesfully installed have fun"
Press Install on TWRP home:
- Choose 1Magisk-v16.0.zip
- Swipe to confirm Flash
- Output gives Failure for some reason( also happens in BiLong video, idk the reason )
- Install both:
2no-verity-opt-encrypt-6.0.zip
and
3lg-rctd-disabler-1.0.zip
- both outputs should say: Successful
From TWRP home press Reboot
- Press System
- Press Do Not Install
Phone should now reboot to Android and have mobile signal
- Go through setup
- Press shutdown
- Enter Factory data reset menu. When logo displays, let go of power, and after 1 second, click power button. Erase everything
Phone goes to TWRP
- Swipe to Allow Modifications
- Go to Install
- Locate files on microSD card
- Choose 1Magisk-v16.0.zip and swipe to flash
- Now it should install successful
- Install both:
2no-verity-opt-encrypt-6.0.zip
and
3lg-rctd-disabler-1.0.zip
- press reboot system
V300S with 8.0
Hi, I have the V30S (V300S) and I want to install the 8.1, which lineageos version should I use or what should I install? It's the 1st time I do this, if you could tell me the steps and links of all I need would be great!!!! I have 8.0 with Bluetooth issues and my device is not rooted, I don't even know how to root… Thanks!
Gera77 said:
my device is not rooted, I don't even know how to root… Thanks!
Click to expand...
Click to collapse
Read post #1 of this thread and you'll know how to root. There's even a section called "FLASH TWRP AND ROOT".
It seems like you posted without reading anything first...
Gera77 said:
Hi, I have the V30S (V300S) and I want to install the 8.1, which lineageos version should I use or what should I install? It's the 1st time I do this, if you could tell me the steps and links of all I need would be great!!!! I have 8.0 with Bluetooth issues and my device is not rooted, I don't even know how to root… Thanks!
Click to expand...
Click to collapse
If you don't understand what I write then the end of the thread have video for you to follow. If you really wanna root your device try to do some research at least a basic one.
I was following the video and it has link to file:
Rom_LGv30_V300s_v21e_Oreo_full_stock.zip
I have Android security patch level
May 1, 2018
And Software version:
V300K21g
On the video @bilong9 has March 1, 2018 security patch level and V300K21e software version. Other software info are the same. Can I use the Rom and other files on that video? Sorry for noob questions
defic said:
I was following the video and it has link to file:
Rom_LGv30_V300s_v21e_Oreo_full_stock.zip
I have Android security patch level
May 1, 2018
And Software version:
V300K21g
On the video @bilong9 has March 1, 2018 security patch level and V300K21e software version. Other software info are the same. Can I use the Rom and other files on that video? Sorry for noob questions
Click to expand...
Click to collapse
For me,
security patch level: May 1, 2018 and Software version:V300L21g
It worked
Thanks, worked for me too! Thanks to @bilong9 s video and @ChazzMatt advice on the original thread. I pretty much followed bilongs video, but I wasn't always sure which buttons @bilong9 pressed, so I took notes of what I did to better understand what is happening (last time I rooted Android was back in the days with note 3). It might be that I did something unnecessary, but in the end I got root. (I Had Security patch level: 1 May, 2018. Future security levels might not work)
I'll leave my (quite detailed) notes here if somebody finds it useful basically it is just text version of @bilong9 youtube video. All credit to him of the links and steps
You need to enter the different boot menus (mainly factory data reset menu and fastboot menu) many times, so I just have notes here on the top of how it should happen
- Download mode
How to enter : Device power is off, hold volume up -> insert usb cable -> should go to download mode
- Factory data reset menu
Hold Power button and volume down button when boot starts. After some seconds (when phone vibrates or LG logo is visible) let go of power button for 1 second, and then click power button. (This caused me the most headaches, as if I were holding the buttons for too long, the device would cut power and reboot)
fastboot mode
- when device is shut down and without usb cable, hold volume down button for few seconds and plug in usb cable
--------------------------------------------------------------
First, Download files:
- LGup V30DLL_PATCHED
https://drive.google.com/file/d/1zvpcaYC6oDmksqvgXqLw9B2K5KjAQYm5/view
- LGup needs you to install download LG Mobile drivers
http://tool.cdn.gdms.lge.com/dn/downloader.dev?fileKey=UW00120120425
- kdz H930
https://drive.google.com/file/d/1CbKGw7TVQ-kLTfraEA39GJridtexwrXw/view
- kdz Us988
https://drive.google.com/file/d/151TbShPdh9VyV5RBXZEQitFztduIF_H5/view
- Adb.unlock.twrp.root
https://drive.google.com/file/d/1SvXeQK2xVk7N9yWEh7efYOZMyl199nwD/view
Depending on your variant (v300k / v300s / v300L) download one of the following files:
- For v300k: Rom zip v300k_21e (twrp) Rom running on us998 platform
https://drive.google.com/file/d/1DSCmNuL9gR6BhpEfv-rjWa4m8skDBfty/view
OR
- For v300s & v300L: Rom zip v300s_21e (twrp) Rom running on us998 platform
https://drive.google.com/file/d/12wHjqu_04ueeD77AgwtDrliE6hXS7blr/view
Move files to microSD card of the phone
- Rom_LGv30_V300s_v21e_Oreo_full_stock.zip ( pick your variant )
- 1Magisk-v16.0.zip
- 2no-verity-opt-encrypt-6.0.zip
- 3lg-rctd-disabler-1.0.zip
Enable developer settings on Android settings
On Developer options
- Enable OEM unlock
- Enable USB Debugging
Connect Device to PC with USB. For me the usb mode had to be File Transfer (I read somewhere that it had to be Photo transfer, but that did not work with LGUP.exe for me
Start LGUP.exe
- If popup "Cant find handset", plug out and in usb on the phone.
- If popup "LGUP can't load the model[C:\Program Files(x86)\LG Electronics\LGUP\..." then create that LGUP folder and copy the model folder to it from LGUP V30DLL_PATCHED folder
- Choose PARTITION DL
- Select file H93020d_00_OPEN_EU_OP_0326.kdz
- Press Start
- From Partition List, tick Select All and press OK
- Phone will reboot to the flash menu
- LGUP_common popup will appear about Partition(s) changed "cache" etc. Press Yes
- Wait for it to finish
- When finished, and screen disappears, immediately hold both power and volume down button, when lg screen appears, stop pressing power button for 1 second, and then click power button once (If you don't time it right, you get stuckin LG life's good screen. Try again by holding volume down and power button for 8 seconds and device restarts)
- In Factory data reset menu delete all.
- Device will boot to android Setup
Setup Android
- Go through the setup steps
- Enable developer settings on Android settings
On Developer options
- Enable OEM unlock
- Enable USB Debugging
On computer, open cmd-here.exe
- enter command to check if device is found: adb devices
- enter command: adb reboot bootloader
- enter command: fastboot getvar all
- From the output: unlocked:no
- enter command: fastboot flash unlock unlock.bin
- Output will say "Failed (remote: Error!! Wrong unlock key size)", don't mind that
- Press Power button
- You will see error message on the device, hold volume down button until you can hear usb connection sound from computer (?)
- Device will boot
- Once booted, shutdown from android menu
- remove usb cable
- Enter download mode by holding Volume up button and then insert usb cable
Open LGUP.exe
- Choose PARTITION DL
- Select US99820a_04_0330.kdz
- Press Start
- From partition list, tick Select all and Ok
- Partition changed popup: press ok.
- As soon as it is done and screen goes black, Hold volume down and power button. when LG v30 screen is visible, let go of power button for 1 second, and then click power button.
- Erase all to factory settings
- Let device boot. As soon as it is booted, shut down android from menu
- When shut down, it starts to reboot, press volume down for few seconds to enter fastboot menu
In fastboot menu
- open cmd-here.exe again.
- Enter command: fastboot getvar all
- Output should now say "unlocked:yes"
- Enter command: fastboot flash recovery TWRP-3.2.1-joan-v0.1.img
- Output should say: "Ok"
- shutdown device by pressing power button. After power off, start holding powerbutton and volumedown button to enter Factory data reset menu. When logo appears or phone vibrates let go of power button, and after 1 second tap power button. Reset all
- Device should go to TWRP
- If device booted to Android, TWRP needs to be flashed again ( Do steps: turn of from power menu, enter fastboot menu, flash TWRP from command line, enter Factory reset on first boot and delete everything ).
In TWRP
- First press Cancel (on Mount: Decrypt Data screen)
- Swipe to Allow Modifications
- press Wipe
- press Format Data
- type: Yes
- Press Check on keyboard
- Output Data Format Complete
- Press back to get to Wipe screen
- Swipe to Factory Reset
- press Back and choose Advanced Wipe
- Tick: Dalvik / ART Cache, System, data, cache
- Swipe to Wipe
- Press home button
Take backup of stuff
press Install on TWRP home:
- Locate files that were copied to microsd card before
- If files are not on microSD card, they can be copied from computer using command: adb push localfile destination
(f.e: adb push Rom_LGv30_V300k_v21e_Oreo_full_stock_v1.zip /external_sd )
- Choose Rom_LGv30_V300k_v21e_Oreo_full_stock_v1.zip (or your variant)
- Swipe to confirm Flash
- Wait until finished
- Output should say: "Zip succesfully installed have fun"
Press Install on TWRP home:
- Choose 1Magisk-v16.0.zip
- Swipe to confirm Flash
- Output gives Failure for some reason( also happens in BiLong video, idk the reason )
- Install both:
2no-verity-opt-encrypt-6.0.zip
and
3lg-rctd-disabler-1.0.zip
- both outputs should say: Successful
From TWRP home press Reboot
- Press System
- Press Do Not Install
Phone should now reboot to Android and have mobile signal
- Go through setup
- Press shutdown
- Enter Factory data reset menu. When logo displays, let go of power, and after 1 second, click power button. Erase everything
Phone goes to TWRP
- Swipe to Allow Modifications
- Go to Install
- Locate files on microSD card
- Choose 1Magisk-v16.0.zip and swipe to flash
- Now it should install successful
- Install both:
2no-verity-opt-encrypt-6.0.zip
and
3lg-rctd-disabler-1.0.zip
- press reboot system
- press Do not install (why?)
Now you are rooted and have Magisk Manager on desktop
Click to expand...
Click to collapse
defic said:
Thanks, worked for me too! Thanks to @bilong9 s video and @ChazzMatt advice on the original thread. I pretty much followed bilongs video, but I wasn't always sure which buttons @bilong9 pressed, so I took notes of what I did to better understand what is happening (last time I rooted Android was back in the days with note 3). It might be that I did something unnecessary, but in the end I got root. (I Had Security patch level: 1 May, 2018. Future security levels might not work)
I'll leave my (quite detailed) notes here if somebody finds it useful basically it is just text version of @bilong9 youtube video. All credit to him of the links and steps
Click to expand...
Click to collapse
Your written instructions are very detailed. Thank you
V300s works with v300L
bilong9 said:
Your written instructions are very detailed. Thank you
V300s works with v300L
Click to expand...
Click to collapse
Thanks, I fixed it on my notes.
defic said:
Thanks, worked for me too! Thanks to @bilong9 s video and @ChazzMatt advice on the original thread. I pretty much followed bilongs video, but I wasn't always sure which buttons @bilong9 pressed, so I took notes of what I did to better understand what is happening (last time I rooted Android was back in the days with note 3). It might be that I did something unnecessary, but in the end I got root. (I Had Security patch level: 1 May, 2018. Future security levels might not work)
I'll leave my (quite detailed) notes here if somebody finds it useful basically it is just text version of @bilong9 youtube video. All credit to him of the links and steps
Click to expand...
Click to collapse
Will copy the detail to the post thanks for detail !!
I wanted to get rid of the korean rom bloatware (and korean text all over the place) so I DL partition flashed h930 EU Rom without xbl1, xbl2, modem, recovery and recoverybak with the patched LGUP. For some reason, I still lost recovery (maybe because I did not manage to do the button dance on first boot?). Then in Fastboot mode I reflashed TWRP, got in to twrp and rooted the phone again.
Calls and data are both working. But when booting the phone, it seems to take longer time than before to get sim signal (around 30 seconds after inserting PIN code). Also when I made my very first call, signal disappeared but came back after a reboot. It has not occured anymore. Also Lte Multiband selection engineering menu is not working, but that was kinda expected.
I kept korean xbl1 and xbl2 because I found a post by @bilong9 when he first discovered how to get signal back. I don't know if signal would work with only korean rom modem.
defic said:
I wanted to get rid of the korean rom bloatware (and korean text all over the place) so I DL partition flashed h930 EU Rom without xbl1, xbl2, modem, recovery and recoverybak with the patched LGUP. For some reason, I still lost recovery (maybe because I did not manage to do the button dance on first boot?). Then in Fastboot mode I reflashed TWRP, got in to twrp and rooted the phone again.
Calls and data are both working. But when booting the phone, it seems to take longer time than before to get sim signal (around 30 seconds after inserting PIN code). Also when I made my very first call, signal disappeared but came back after a reboot. It has not occured anymore. Also Lte Multiband selection engineering menu is not working, but that was kinda expected.
I kept korean xbl1 and xbl2 because I found a post by @bilong9 when he first discovered how to get signal back. I don't know if signal would work with only korean rom modem.
Click to expand...
Click to collapse
You can use international rom ( BoomBox). in the following order
Flash rom v300x.zip > in twrp full wipe > flash rom boombox.
I am using rom boombox 20r
fastboot's not working on my v300L
nythawk23 said:
fastboot's not working on my v300L
Click to expand...
Click to collapse
Have you followed the instructions in post #1 yet?
You can't skip ahead. You'll get fastboot commands when you follow the instructions step by step.
Hello to all. I have been following the detailed instructions by Defic based on Bilong9 and watching also video in youtube, so I have got well prepared before unlocking bootloader in my LG V30 v300k. Thanks a lot, I could unlock bootloader and installed root and TWRP, but I faced at the end with a problem of missing carrier signal. I thought maybe I have done mistake and downloaded stock and flashed it in LGUP in Refurbished mode since Bilong9 has advised to somebody with the same issue. After that I have flashed KDZ US988 since I had already bootloader unlocked, then I installed again v300k file provided in the instruction. I don't have still carrier signal. Please, help me to resolve my issue with your advises, how can I bring back carrier signal? I don't want to brick my phone, may be the issue with modem, is there possibility of installing only modem seperatetly via TWRP, will this work? What if I install firmware in LG bridge, will this work and will I loose unlocked bootloader? Thank you all in advance.
Umedchik said:
Hello to all. I have been following the detailed instructions by Defic based on Bilong9 and watching also video in youtube, so I have got well prepared before unlocking bootloader in my LG V30 v300k. Thanks a lot, I could unlock bootloader and installed root and TWRP, but I faced at the end with a problem of missing carrier signal. I thought maybe I have done mistake and downloaded stock and flashed it in LGUP in Refurbished mode since Bilong9 has advised to somebody with the same issue. After that I have flashed KDZ US988 since I had already bootloader unlocked, then I installed again v300k file provided in the instruction. I don't have still carrier signal. Please, help me to resolve my issue with your advises, how can I bring back carrier signal? I don't want to brick my phone, may be the issue with modem, is there possibility of installing only modem seperatetly via TWRP, will this work? What if I install firmware in LG bridge, will this work and will I loose unlocked bootloader? Thank you all in advance.
Click to expand...
Click to collapse
I didn't have the same problem as you.
You could try to flash the stock v300k rom with LGUP to get to the beginning state (and lose unlock and twrp) to see if you get the signal back. Get the firmware here https://lg-firmwares.com/lg-mv300k-firmwares/firmwares/ . I have not done this and I am not an expert on this subject.
Thanks Defic, I will follow your advice, though I have done it last time with stock v300k21e, mine was v300k20e.
defic said:
I wanted to get rid of the korean rom bloatware (and korean text all over the place) so I DL partition flashed h930 EU Rom without xbl1, xbl2, modem, recovery and recoverybak with the patched LGUP. For some reason, I still lost recovery (maybe because I did not manage to do the button dance on first boot?). Then in Fastboot mode I reflashed TWRP, got in to twrp and rooted the phone again.
Calls and data are both working. But when booting the phone, it seems to take longer time than before to get sim signal (around 30 seconds after inserting PIN code). Also when I made my very first call, signal disappeared but came back after a reboot. It has not occured anymore. Also Lte Multiband selection engineering menu is not working, but that was kinda expected.
I kept korean xbl1 and xbl2 because I found a post by @bilong9 when he first discovered how to get signal back. I don't know if signal would work with only korean rom modem.
Click to expand...
Click to collapse
Is FM radio working on H930 firmware?
LGup V30DLL_Patched link is not working. :*(
Edit:
Rechecked and all links are down
So... I managed to get it working for awhile, then something happened...
I don't know if this will help but I installed an app called granular immersive mode and followed the instructions... then after some time my phone suddenly switched into airplane mode and when I switched airplane mode off I couldn't get a signal. So I rebooted the phone.... and still no signal. Tried to check the mobile network setting, network mode says null and couldn't search for provider, also tried the 4636 code and got into the setting found out that everything is dead, so I flashed back into stock (using LGUP refurbish), but still no signal. I, for some reason thought locking the bootloader back would help but no, it didn't help.
I'm on v300s.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I had to fix a couple of bricked selfie phones (z00ud and z00udb but i assume this works on any selfie zd551kl model), that were probably bricked by autoflashing wrong firmware, so after spending a few days going thru many different tutorials, this is my tested method on how to fix them (or if you wanna get a cheap phone from taobao and turn it into a decent one), obviously it wasn't extensively tested, so take it as is . Some steps MIGHT be unnecessary but i didn't want to skip them as i was just glad i found a way how to get the phones to completely stable, latest firmware from useless paperweight.
A. if fone doesnt accept any firmware,or bricked,bootlooped etc. flash basic CN firmware, regardless is recovery WW or CN
- Instructions:
1. go to phone recovery (PWR button + VolDwn, release PWR on logo)
2. on phone select adb bootloader, it switches to fastboot mode (or hold PWR button + VolUp, release PWR on logo)
3. on PC unzip archive and start the autoflash .bat file
4. start the phone
files: archive (Asus Zenfone Selfie Z00UDB ZD551KL 3+16 here )
B. upgrade CN/WW firmare to latest version
- Instructions:
1. on PC install adb drivers
2. go to phone recovery (PWR button + VolDwn, release PWR on logo)
3. on phone select adb sideload
4. on PC, copy firmwares into adb folder
5. on PC go to adb folder and start cmd in that folder (shift+Rclk)
6. type adb devices to check connection, then adb sideload firmwarename.zip
7. start the phone
8. repeat all steps until latest CN/WW firmware is installed
files: adb drivers adb-setup-1.4.3 here , firmwares here(UL-Z00T-CN-1.13.40.661-user,UL-Z00T-CN-1.14.40.695-user,UL-Z00T-CN-1.15.40.1548-user)
C.swap CN firmware for WW, upgrade to Android 6
- Instructions: (also someone elses crappy YT video instructions here )
1. on PC install vc x86 and x64 redist packages for 2010,2012,2013 to prevent .ddl missing errors when running flashtool
1. on PC install asus flash tool
3. on fone turn on usb debugging in developer settings (click on about>sw info>build number)
4. turn off fone then start it in fastboot mode (hold PWR button + VolUp, release PWR on logo)
5. connect the fone to PC, start the autoflash .bat file from the firmware folder (CSC_ZD550KL_1_2_0_70_fac_eng_20150905_secure)
6. disconnect usb, wait for fone to reboot, then disconnect the battery on boot logo (remove back cover in advance)
7. return the battery, and start the fone again in fastboot mode, check for extra info on screen
8. on PC start the flashtool, connect the fone in fastboot mode, check if connected, select the model (ZD551KL), select wipe data
9. on PC, browse to firmware (WW_ZD551KL_1.15.40.1582-bsp-user-20160510203701-secured-release) in flashtool, click start, chose Yes for both options (wipe and image promt), wait until flashing is over
10. disconnect and start the fone
11. connect the fone to PC, copy the firmware (UL-Z00T-WW-21.40.0.1692-user) to internal memory or SD card and wait for the fone to recognize the package and auto-update to Android 6
12. connect the fone to PC, copy any newer firmware to internal memory or SD card (no need to copy next iteration or 2156 build, you can go to for ex. 2214 build right away) wait for the fone to recognize the package and auto-update to newer build of Android 6
files: vc redist packages here , firmwares (WW_ZD551KL_1.15.40.1582-bsp-user-20160510203701-secured-release here,CSC_ZD550KL_1_2_0_70_fac_eng_20150905_secure here), Android 6 firmwares here
Are those steps A,B and C and we should follow everything or methods and just follow only 1? I have a Z00UD Asus Model phone, should I still use the firmware Z00UDB from step A? Thank you!!
jasonch said:
Are those steps A,B and C and we should follow everything or methods and just follow only 1? I have a Z00UD Asus Model phone, should I still use the firmware Z00UDB from step A? Thank you!!
Click to expand...
Click to collapse
Depending on your issues, you should pick the step you need, in case nothing works on your phone start with step A, otherwise start with the step that is appropriate for your problem.
Thanks for this guide. Tried this but get stuck at FRP of ASUS. Google mail was on previous owner. Any solutions?
can flash .zip via TWRP?
dhonxean said:
Thanks for this guide. Tried this but get stuck at FRP of ASUS. Google mail was on previous owner. Any solutions?
Click to expand...
Click to collapse
not sure i understand, are you saying your phone is locked with the account from the previous owner ? if so then just do a factory reset from recovery and setup with your own account.
witopanjoel said:
can flash .zip via TWRP?
Click to expand...
Click to collapse
What zip exactly, some should be done like in the tutorial, others can be flashed from recovery
I use the bootloader from your archive on a Z00UD and it is bricked (will remain on Asus screen)...
Do you have a Z00UD bootloader?
may phone is bricked itry this and now my phone is in boot loop..
z00ud ZD551KL
firmwares are not already available on the websites, do you have any other website that has those files?
asus z00ud, soft bricked by wrong flash, now not turning on, display black, only vibrate when plug in charger or press the power button. Please help.
My asus zenfone selfie model become asus zenfone go. How do i fix this? Any help please.
Need Asus Zenfone Selfie Z00UD Hard Brick/Dead Boot Repair Solution
Z00UD Flash After set dead show Qualcomm HS-USB QDLoader 9008 How To Solve? Help Me
One UI 3.0 beta has been released for Galaxy M31.
If you are part of the supported regions, you can grab the update link and share it here (for each update).
These are the steps I borrowed from @AhmedMomen 's S10 thread.
How to capture the update.zip file to share with other people:
1. Download HTTP canary app from Play Store.
2. Open HTTP Canary app.
3. Start the update by pressing "Download". Don't pause it!
4. Go back to Canary app and start it. It will grab the link for you.
5. Please share the link and your model number here!
As for how to sideload the update.zip file, here is the:
ADB Method:
1. Download and install adb.
2. Connect your phone to your PC.
3. Download the update file where you have installed adb Platform Tools.
4. Rename the file (including the extension) to "update.zip". Click "Yes" on the prompt.
5. Open your terminal of choice.
6. Type "adb reboot recovery" and press ENTER on your keyboard. Wait for your phone to reboot to recovery mode.
7. Navigating with the volume buttons and selecting with the power button, go to "Apply update via ADB".
8. Back to the terminal on your PC type "adb sideload update.zip". (NOTE: If it says that device is not connected, just remove and put the USB cable back until it works).
9. The update is being installed. It will be completed when the phone boots up. You may use your phone normally after.
10. Report any bugs on the Samsung Members app! https://www.samsung.com/global/galaxy/apps/samsung-members/
SD Card Method:
1. Search for an update file. You can usually find one in XDA Forums.
2. Check if you have the right build and open the right link.
3. Download the update file (.bin extension).
4. Move the update file to your SD Card. (NOTE: If you are getting errors, back up the stuff of your SD Card and format it from your Galaxy phone.)
5. Rename the .bin file (including the extension) to "update.zip". Click "Change" on the prompt.
6. Reboot to Recovery Mode, by connecting your phone to another device (such as your earphones) and holding the Volume Up + Power (+ Bixby) buttons.
7. Navigating with the volume buttons and selecting with the power button, go to "Apply update via SD Card".
8. Navigate to and select "update.zip".
9. The update will start installing. It will be completed when the phone boots up. You may use your phone normally after.
10. Report any bugs on the Samsung Members app! https://www.samsung.com/global/galaxy/apps/samsung-members/
You may also roll back to One UI 2.5 or update to stable One UI 3.0, when it's released with this method:
1. Download and extract both Frija and Odin.
2. Launch Frija.
3. Check the "Auto" button. Write your device's Model Number and CSC
(Your model number is at Settings, then About phone).
4. Click on "Check Update".
5. Click on "Download" and choose a folder to save the firmware.
6. After the download is complete, extract the firmware .zip.
7. Launch Odin.
8. Click the "BL" button and select the file that starts with "BL_...".
9. Click the "AP" button and select the file that starts with "AP_...".
10. Click the "CP" button and select the file that starts with "CP_...".
11. Click the "CSC" button and select the file that starts with "HOME_CSC_..." (Selecting CSC_... will wipe your data!).
12. Turn off your phone.
13. Boot into Download Mode by holding both Volume Up + Volume Down buttons and then connecting it to your PC.
14. After booting into Download Mode, press the Volume Up button to continue.
15. Back to Odin, click "Start".
16. The flashing process will be over when "PASS" is shown in Odin and your phone reboots. You may close Odin and disconnect the phone from your PC then.
17. Congrats! You have successfully flashed the latest update to your device.
18. After your phone is on, turn it off again.
19. Boot into Recovery Mode by connecting to your PC and holding Volume Up + Power Button (+ Bixby Button).
20. Navigating with the Volume Buttons and selecting with the Power Button, go to "Wipe cache partition".
21. Select "Yes".
22. Select "Reboot system now".
Links:
Odin 3 by Samsung:
Index of /samsung-tools/
Frija by invmini:
[Tool] Frija - Samsung firmware downloader/checker
* * * PLEASE UNDERSTAND WHAT YOU ARE INSTALLING TO YOUR DEVICES AT ALL TIMES AND ME AND THE DEVELOPER ARE NOT RESPONSIBLE FOR ANY SORT OF DAMAGE TO YOUR DEVICE * * * Hey Guys :) Frija is a new tool (successor of now depreciated tool SamFirm)...
forum.xda-developers.com
CSCs Cheat Sheet:
List of Samsung Galaxy CSC Country Specific Product code and region they belong to
List of CSC Country Specific code for Samsung Galaxy & various countries, regions, network carriers, model numbers, variants phone belong to.
www.androidsage.com
Thank you for your support and I hope I helped you!
Can someone share the zip file here please? The beta program is full and would like to get hands on this beta..
UPDATE: Added SD Card Method too!
UPDATE 2: Added flashing by Odin!
BredzProh said:
UPDATE 2: Added flashing by Odin!
Click to expand...
Click to collapse
Tell me what this applies to Turkey? So can I install android 11 with the method you explained in the 3rd row?
Got updated to UI 3.0 android 11 ota and updated
I rooted my Android 10 M31 with Magisk using the Magisk image patching method so now my phone is everything stock + magisk root (no custom kernel or recovery) and a few root applications/modules such as Vanced, ViperFX and adAway.
Oddly enough, I have received a push notification from Samsung about the availability of the Android 11 update. But I don't feel safe to OTA update my phone because of root. So is there any way I can update it without losing any data and without losing root?
Thanks in advance!