Develop Bugs

2nd attempt to root (after hard brick)

Hello everyone,
After my first attempt to root my RN8P and a hard brick (after installing TWRP) I would obviously like to avoid a second disaster.
Let me give you a bit of an overview first though:
MIUI version: Global 11.0.6.0 (PGGMIXM)
Android version: 9 PPR1.180610.011
Security Patch Level: 2019-12-01
Bootloader: Unlocked
I am not a complete noob as I have already rooted and flashed CFWs on 2 Xiaomi phones (Redmi 3 and Redmi Note 4x) without any problems but I have to admit that I do not really understand all the details so consider me a "copy and paste" user which is why I post this here. After having the hard brick experience and dishing out 30 USD for my stupidity to have someone flash a stock ROM again I would like to make sure that I am NOT following a guide which will lead me down the same alley again.
Goal: Plan is to install TWRP and Magisk (want to continue using banking on my device) and flash the Lineage ROM. I also use Macrodroid to automate a lot of things hence the need for root.
Is there anyone here who could point me to the correct procedures for my ROM version/setup to help me succeed on my 2nd try?
I would love to learn all of this in detail before I attempt it again but unfortunately I am a busy dad with 2 young kids and simply don't have the time to really do
All help is much appreciated!
Cheers!

How to flash TWRP (LR.TEAM) and root RN8pro:
1. Download recovery file from this message
2. Open CMD from the dir where you store twrp.img (it's important because you don't need to type whole path of the twrp.img
3. Turn off the device, hold Power button & Vol- to enter fast boot and connect device to USB
4. In CMD type first fastboot devices to ensure that device is in fastboot, this is not important but recommended. Output should be something like this 4l6lsctgskpj4swc fastboot
5. Then it's time to flash recovery file. Type fastboot flash recovery twrp.img
6. This is the most important step now, on the device screen it should write USB Transmission ok if that is there you are ready to go. Remove device from the USB and hold Power button & Vol+, When the device turn off the screen keep holding Vol+ it'll keep screen off for about 5-10 seconds, then it'll show a recovery, still holding vol+ because it will get restarted again, and again still holding vol+ and recovery will show up. Simple words (Keep holding vol+ till recovery not appear for second time)
7. If it asks for a password, it's a password you use on the device it self(one for unlocking the screen or unlock the device after reboot), enter password and wait for Data decrypt.
At the moment there is no root and recovery will be replaced after you try to boot next time. To prevent it from replacing recovery do next (my opinion is skipping step 8. and 9. and having stock recovery because of MIUI updates):
8. Go to mount and tick the /system
9. Go back, tap on advanced, then to File Manager search for system_root dir open it, then find system and on the bottom is file called recovery-from-boot.p Remove that file and recovery wont be replaced
Now how we root it:
10. Go to advanced and tap on Close AVB2.0 and swipe to confirm
11. Go back and tap to Install ROOT, swipe to install and Reboot system
This will install Magisk v19.4, after boot you can update it from the Magisk Manager, my suggestion is to first update the manager then Magisk binary.
I have done this on ROM: MIUI Global 11.0.2 and 11.0.3 | Stable 11.0.2.0(PGGEUXM), Android 9 PPR1.180610.011
Guide by: @Paget96
Credit : Telegram group

AD FOX said:
How to flash TWRP (LR.TEAM) and root RN8pro:
1. Download recovery file from this message
2. Open CMD from the dir where you store twrp.img (it's important because you don't need to type whole path of the twrp.img
3. Turn off the device, hold Power button & Vol- to enter fast boot and connect device to USB
4. In CMD type first fastboot devices to ensure that device is in fastboot, this is not important but recommended. Output should be something like this 4l6lsctgskpj4swc fastboot
5. Then it's time to flash recovery file. Type fastboot flash recovery twrp.img
6. This is the most important step now, on the device screen it should write USB Transmission ok if that is there you are ready to go. Remove device from the USB and hold Power button & Vol+, When the device turn off the screen keep holding Vol+ it'll keep screen off for about 5-10 seconds, then it'll show a recovery, still holding vol+ because it will get restarted again, and again still holding vol+ and recovery will show up. Simple words (Keep holding vol+ till recovery not appear for second time)
7. If it asks for a password, it's a password you use on the device it self(one for unlocking the screen or unlock the device after reboot), enter password and wait for Data decrypt.
At the moment there is no root and recovery will be replaced after you try to boot next time. To prevent it from replacing recovery do next (my opinion is skipping step 8. and 9. and having stock recovery because of MIUI updates):
8. Go to mount and tick the /system
9. Go back, tap on advanced, then to File Manager search for system_root dir open it, then find system and on the bottom is file called recovery-from-boot.p Remove that file and recovery wont be replaced
Now how we root it:
10. Go to advanced and tap on Close AVB2.0 and swipe to confirm
11. Go back and tap to Install ROOT, swipe to install and Reboot system
This will install Magisk v19.4, after boot you can update it from the Magisk Manager, my suggestion is to first update the manager then Magisk binary.
I have done this on ROM: MIUI Global 11.0.2 and 11.0.3 | Stable 11.0.2.0(PGGEUXM), Android 9 PPR1.180610.011
Guide by: @Paget96
Credit : Telegram group
Click to expand...
Click to collapse
Thanks a lot for your reply!! I will try this process. The only thing I was unable to find is the files you are mentioning. Can you please point me to those?
Much appreciated!

[Guide][Recovery][Unofficial] TWRP v3.5.0 for Samsung Galaxy A50

TWRP v3.5.0 for Samsung Galaxy A50. I JUST UPGRADED IT to v3.5.0 based on TWRP v3.4.0 One UI 2.5 BTL1 firmware by mohitmallick17
Tested install GSI and Custom rom FreshROMs by TenSeventy7 ( recommended custom rom to try ). Tested rooting SM-A505F BTL1 firmware. Please tell us if it works for other models.
Flash TWRP Instructions:
Make sure the bootloader are unlocked, OEM unlock option is grey out
Enter Download Mode : Turn Power Off. Press and hold Volume Up + Volume Down key together, while pressing these keys, connect the phone to computer, then press volume up once.
Open ODIN, IMPORTANT!: Uncheck “Auto Reboot” in Options!
Flashing TWRP_v3.5.0_A505_BTL1_Magisk.tar as AP in ODIN, then click start.
Magisk is now successfully flashed to your device! Several steps before you can properly use the device.
DO NOT SKIP THIS STEP! Press and hold Volume Down + Power Key, when the screen blank quickly press and hold Volume Up + Power key, when Samsung Logo appears release Power key only, keep pressing Volume Up key until TWRP Recovery Mode Appears.
Select Wipe -> Format data, type 'yes' and confirm
Select Install - select multidisabler-samsung-2.6.zip Swipe to confirm Flash
Select Reboot to System
When SAMSUNG logo appears wait for a few minutes or more then press and hold volume down + power key until the screen blank
Setup the phone
Rooting if necessary
First time Restart or Power off, make sure the OEM unlocking options is grey out
Enter TWRP recovery : Turn Power Off. Press and hold Volume Up key + Power Key, When SAMSUNG logo appears release Power Key only, keep pressing Volume Up key until TWRP recovery appears.
Select Reboot to - Recovery
Install Magisk Manager
Connect to Internet
Open Magisk Manager, it will ask to do additional setups. Let it do its job and the app will automatically reboot your device.
Done!
DOWNLOAD
Download TWRP_v3.5.0_A505_BTL1.tar, use this if you want to install TWRP only
Download TWRP_v3.5.0_A505_BTL1_Magisk.tar, use this if you want to root - Magisk v21.2 patched
Credit to mohitmallick17

Nice job

this will work with BTK5 fw?

I managed to root Successfully but after additional setup the phone rebooted after 5 secs, it was on but still asked for additional setup, suddenly after updating from Magisk v8.0.5 to Magisk v22 I lost root now I tried to boot device it failed to turn on but now in download mode with error VBmeta: No sign info

Bros! are this supposed to work on SM-A505Fn? cuz i tried it and soft bricked my phone -_-

PetiHun08 said:
Bros! are this supposed to work on SM-A505Fn? cuz i tried it and soft bricked my phone -_-
Click to expand...
Click to collapse
UPDAAAATE. Reflashed everytrhing tried again and works on btl3+ sm-a505fn/ds eu model

shoosterjonesr said:
I managed to root Successfully but after additional setup the phone rebooted after 5 secs, it was on but still asked for additional setup, suddenly after updating from Magisk v8.0.5 to Magisk v22 I lost root now I tried to boot device it failed to turn on but now in download mode with error VBmeta: No sign info
Click to expand...
Click to collapse
U need to flash multidisaabler

Will this work on an A50 witn the Android 11/ OneUI 3.1 update? Because I got nothing but errors and bootloops trying to root that, while I had no problems with an Android 10 version.

IF i dont have an sd card can i sideload
redymedan said:
TWRP v3.5.0 for Samsung Galaxy A50. I JUST UPGRADED IT to v3.5.0 based on TWRP v3.4.0 One UI 2.5 BTL1 firmware by mohitmallick17
Tested install GSI and Custom rom FreshROMs by TenSeventy7 ( recommended custom rom to try ). Tested rooting SM-A505F BTL1 firmware. Please tell us if it works for other models.
Flash TWRP Instructions:
Make sure the bootloader are unlocked, OEM unlock option is grey out
Enter Download Mode : Turn Power Off. Press and hold Volume Up + Volume Down key together, while pressing these keys, connect the phone to computer, then press volume up once.
Open ODIN, IMPORTANT!: Uncheck “Auto Reboot” in Options!
Flashing TWRP_v3.5.0_A505_BTL1_Magisk.tar as AP in ODIN, then click start.
Magisk is now successfully flashed to your device! Several steps before you can properly use the device.
DO NOT SKIP THIS STEP! Press and hold Volume Down + Power Key, when the screen blank quickly press and hold Volume Up + Power key, when Samsung Logo appears release Power key only, keep pressing Volume Up key until TWRP Recovery Mode Appears.
Select Wipe -> Format data, type 'yes' and confirm
Select Install - select multidisabler-samsung-2.6.zip Swipe to confirm Flash
Select Reboot to System
When SAMSUNG logo appears wait for a few minutes or more then press and hold volume down + power key until the screen blank
Setup the phone
Rooting if necessary
First time Restart or Power off, make sure the OEM unlocking options is grey out
Enter TWRP recovery : Turn Power Off. Press and hold Volume Up key + Power Key, When SAMSUNG logo appears release Power Key only, keep pressing Volume Up key until TWRP recovery appears.
Select Reboot to - Recovery
Install Magisk Manager
Connect to Internet
Open Magisk Manager, it will ask to do additional setups. Let it do its job and the app will automatically reboot your device.
Done!
DOWNLOAD
Download TWRP_v3.5.0_A505_BTL1.tar, use this if you want to install TWRP only
Download TWRP_v3.5.0_A505_BTL1_Magisk.tar, use this if you want to root - Magisk v21.ifpatched
Credit to mohitmallick17
Click to expand...
Click to collapse
if i have no sdcard can i sideload multidisabler?

PetiHun08 said:
IF i dont have an sd card can i sideload
if i have no sdcard can i sideload multidisabler?
Click to expand...
Click to collapse
after format data just copy multidisabler to internal storage

Ok with mtp obviously. Thank u

redymedan said:
TWRP v3.5.0 for Samsung Galaxy A50. I JUST UPGRADED IT to v3.5.0 based on TWRP v3.4.0 One UI 2.5 BTL1 firmware by mohitmallick17
Tested install GSI and Custom rom FreshROMs by TenSeventy7 ( recommended custom rom to try ). Tested rooting SM-A505F BTL1 firmware. Please tell us if it works for other models.
Flash TWRP Instructions:
Make sure the bootloader are unlocked, OEM unlock option is grey out
Enter Download Mode : Turn Power Off. Press and hold Volume Up + Volume Down key together, while pressing these keys, connect the phone to computer, then press volume up once.
Open ODIN, IMPORTANT!: Uncheck “Auto Reboot” in Options!
Flashing TWRP_v3.5.0_A505_BTL1_Magisk.tar as AP in ODIN, then click start.
Magisk is now successfully flashed to your device! Several steps before you can properly use the device.
DO NOT SKIP THIS STEP! Press and hold Volume Down + Power Key, when the screen blank quickly press and hold Volume Up + Power key, when Samsung Logo appears release Power key only, keep pressing Volume Up key until TWRP Recovery Mode Appears.
Select Wipe -> Format data, type 'yes' and confirm
Select Install - select multidisabler-samsung-2.6.zip Swipe to confirm Flash
Select Reboot to System
When SAMSUNG logo appears wait for a few minutes or more then press and hold volume down + power key until the screen blank
Setup the phone
Rooting if necessary
First time Restart or Power off, make sure the OEM unlocking options is grey out
Enter TWRP recovery : Turn Power Off. Press and hold Volume Up key + Power Key, When SAMSUNG logo appears release Power Key only, keep pressing Volume Up key until TWRP recovery appears.
Select Reboot to - Recovery
Install Magisk Manager
Connect to Internet
Open Magisk Manager, it will ask to do additional setups. Let it do its job and the app will automatically reboot your device.
Done!
DOWNLOAD
Download TWRP_v3.5.0_A505_BTL1.tar, use this if you want to install TWRP only
Download TWRP_v3.5.0_A505_BTL1_Magisk.tar, use this if you want to root - Magisk v21.2 patched
Credit to mohitmallick17
Click to expand...
Click to collapse
Hmm... Another a505fn but ds model. Im stuck on boootloader warning. Can somebody help? (i flashed multidisabler and rebooted to system

PetiHun08 said:
Hmm... Another a505fn but ds model. Im stuck on boootloader warning. Can somebody help? (i flashed multidisabler and rebooted to system
Click to expand...
Click to collapse
Got back to stock rom. Plz help

PetiHun08 said:
Got back to stock rom. Plz help
Click to expand...
Click to collapse
I think boot.img isthe problem. Maybe can i fiish if i flash twrp with no magsk?(btw my phone has no ramdisk)

Still waitin

Will this work for A50s FN ?
Right now it is flashed with TWRP 3.3.0, but I want to upgrade to Android 11 and is looking for suitable TWRP upgrade. It's my main phone so I can't risk have it bootloop

Hi,I unlocked bootloader,but canot install Twrp.in odin,it always failed.Help ?

What error

PetiHun08 said:
What error
Click to expand...
Click to collapse
In odin it faild,I realise,I'm on exynis version,but cenot finde exynos version of twrp.

I have exynos a50 and mine is forking fine. Ehat error do odin gives you?

How To Guide How to flash a stock rom [alioth]

Hello everyone.
The purpose of this guide is to illustrate two methods to flash the stock rom on F3, both with the use of xiaomi flash tool (which for convenience I will call "miflash") and with cmd.​Warnings!​Before starting I would like to make one point clear, every moding operation involves risks that could lead to bootloop, softbrick or hardbrick of your phone, they can be caused by countless circumstances or actions, so you need the utmost attention and scrupulousness in performing certain operations.​What I will describe I have tested it on my F3 and it works, in any case, ​neither I nor the xda forum are responsible for any breakdowns on the phone caused by the operations described below!​Having said that, let's start...
All you need is:​
Bootloader unlocked, using the official tool you find here
Latest version of miflash, which you can download from here;
SDK platform tools, which you can download from here;
Stock fastboot rom, which you can download from here, here or here.
Make a backup of your data because they will be deleted in the process!
Now that you have everything you need, follow the steps:​1) How to flash a stock rom using miflash.​
Unzip miflash to C:\ ; [Only for the first time]​
Unzip SDK platform tools to C:\ ; [Only for the first time]
Unzip the fastboot rom in the miflash folder;
Rename the fastboot rom folder with a shorter name and no spaces like "V12.5.6.0.RKHEUXM";
Disable driver signature enforcement in windows 10; [Only for the first time. It is a temporary option that is reactivated the next time the pc is restarted]
Spoiler: How to disable driver signature
1 - Open settings;
2 - Go to update and security;
3 - In the left column click on restore;
4 - Under advanced restart click on restart now;
The pc will restart in a blue screen, click in sequence:
1. Troubleshoot;
2. Advanced options;
3. Startup Settings;
4. Restart;
5. Press the 7 or F7 key to Disable driver signature.
Now the pc restarts by itself.
Go to the miflash folder in c:\, open it and search for XiaoMiFlash.exe, right click and start as administrator;
Click on the driver button at the top and then install (if a warning message comes out, install anyway); [Only for the first time]
Restart your pc; [Only for the first time]
Go to the miflash folder in c:\, open it and search for XiaoMiFlash.exe, right click and start as administrator;
Click on the select button at the top left and navigate to the fastboot rom folder in the window that opens, then press ok; (If you followed the guide it is located in C:\MiFlash20210226\namethatyougavetotherom);
Click on the clean all option at the bottom right;
Spoiler: Why clean all option
- The clean all option allows you to flash the rom avoiding blocking the bootloader (which I recommend);
- The save user data option allows you to flash the rom without deleting the data (not recommended if you come from custom rom or from stock rom of different regions and does not block the bootloader);
- The clean all and lock option instead at the end of the flash blocks the bootloader which in some cases especially if you flash a rom that is not the original and can lead to a brick of the phone (I do not recommend blocking the bootloader, but if you want to do it make sure you are on the stock rom of the same region your phone was born with).
Now in the phone enable debug USB in developer option;
Spoiler: Developer option
Enable developer option:
- Go to settings;
- Tap on my device;
- Tap on all specifications;
- 7 tap on miui version.
Debug USB:
- Go to settings;
- Other settings;
- Developer options;
- Debug USB.
Restart the phone in fastboot mode and connect it to a rear USB port or in any case to a USB 2.0;
Spoiler: Fastboot mode
Turn the phone off;
Long press of the power key + volume -.
If the phone is recognized by miflash its code appears in the first row of the table otherwise click the refresh button at the top right;
Make sure clean all is selected and click on flash;
The flash lasts several minutes wait without touching anything;
Surely miflash at the end of the flash will give an error because the clean all option is selected and not blocking the bootloader at the end of the process it recognizes it as an error. Do not worry!!! it's normal;
If all went well the phone should restart by itself, (attention! the first start of the phone lasts several minutes stuck on the miui logo, wait until the configuration screen appears.
2) How to flash a stock rom using cmd.​Small premise; You could easily use this method even just by starting the .bat file inside the fastboot rom, but if any problems should occur or at the end of the process the window would close immediately without giving you the time to understand what happened, while if you run the .bat file directly from the prompt (cmd) you have the possibility to check the whole flash process and see if any errors occur because the window will remain open anyway.​
Unzip miflash to C:\ ; [Only the first time to install drivers]​
Unzip SDK platform tools to C:\ ; [Only for the first time]
Unpack the fastboot rom and move all content to C:\platform-tools;
Disable driver signature enforcement in windows 10; [Only for the first time. It is a temporary option that is reactivated the next time the pc is restarted]
Spoiler: How to disable driver signature
1 - Open settings;
2 - Go to update and security;
3 - In the left column click on restore;
4 - Under advanced restart click on restart now;
The pc will restart in a blue screen, click in sequence:
1. Troubleshoot;
2. Advanced options;
3. Startup Settings;
4. Restart;
5. Press the 7 or F7 key to Disable driver signature.
Now the pc restarts by itself.
Go to the miflash folder in c:\, open it and search for XiaoMiFlash.exe, right click and start as administrator; [Only for the first time]
Click on the driver button at the top and then install (if a warning message comes out, install anyway); [Only for the first time]
Restart your pc; [Only for the first time]
Go to the start button with the mouse and click with the right button;
In the menu that will open click on command prompt (administrator) a cmd window will open;
Now in the phone enable debug USB in developer option;
Spoiler: Developer option
Enable developer option:
- Go to settings;
- Tap on my device;
- Tap on all specifications;
- 7 tap on miui version.
Debug USB:
- Go to settings;
- Other settings;
- Developer options;
- Debug USB.
Restart the phone in fastboot mode and connect it to a rear USB port or in any case to a USB 2.0;
Spoiler: Fastboot mode
Turn the phone off;
Long press of the power key + volume -.
Now in the cmd window you are in the path: C:\windows\system32. First we move to the platform tools folder and check if the pc recognizes the phone in fastboot (if you followed the guide it will be in C:\platform-tools) to move to the folder press this command and press enter:
Code:
cd c:\platform-tools
Now check if the pc recognizes the phone in fastboot with this command and press enter (The phone code should appear):
Code:
fastboot devices
If the code appears you can start the .bat file to start the flash, then type this command and press enter:
Code:
flash_all.bat
Spoiler: Why flash_all.bat
- The flash_all.bat allows you to flash the rom avoiding blocking the bootloader (which I recommend);
- The flash_all_except_storage.bat allows you to flash the rom without deleting the data (not recommended if you come from custom rom or from stock rom of different regions and does not block the bootloader);
- The flash_all_lock.bat instead at the end of the flash blocks the bootloader which in some cases especially if you flash a rom that is not the original and can lead to a brick of the phone (I do not recommend blocking the bootloader, but if you want to do it make sure you are on the stock rom of the same region your phone was born with).
The flash lasts several minutes wait without touching anything but you can follow the trend in case there are problems;
If all went well the phone should restart by itself, (attention! the first start of the phone lasts several minutes stuck on the miui logo, wait until the configuration screen appears.
I hope this guide can help you to get back or flash the stock rom.
Happy flash everyone!​

Thanks.
Can i do by twrp Install the rom

Nandowiko said:
Thanks.
Can i do by twrp Install the rom
Click to expand...
Click to collapse
It is not advisable to flash the stock rom with twrp for two simple reasons:
1) For the moment the only two twrp developed are in beta state and it is not certain that they perform this task correctly.
2) Twrp does not do the arb check (Anti RollBack) To find out more, read here:
Xiaomi's Anti-Rollback Protection Explained: How to avoid bricking your phone
All Xiaomi smartphones and tablets will have anti-rollback protection enabled. What is it and how do you avoid bricking your device because of it?
www.xda-developers.com
So using miflash or the executable via cmd is the safest and most reliable way to flash the stock rom.

This is not working with locked bootloader.. any other method with locked bootloader to flash stock rom?

Mihiranpura said:
This is not working with locked bootloader.. any other method with locked bootloader to flash stock rom?
Click to expand...
Click to collapse
It is true! you need the unlocked bootloader, I read that with this tool you can do it. I have not tried it, I do not guarantee the success of the flash with a locked bootloader and in any case I strongly advise against flashing with a locked bootloader. If any errors occur it is risky and complicated to recover it, it is always better to unlock it.

RollDload said:
Hello everyone.
The purpose of this guide is to illustrate two methods to flash the stock rom on F3, both with the use of xiaomi flash tool (which for convenience I will call "miflash") and with cmd.​Warnings!​Before starting I would like to make one point clear, every moding operation involves risks that could lead to bootloop, softbrick or hardbrick of your phone, they can be caused by countless circumstances or actions, so you need the utmost attention and scrupulousness in performing certain operations.​What I will describe I have tested it on my F3 and it works, in any case, ​neither I nor the xda forum are responsible for any breakdowns on the phone caused by the operations described below!​Having said that, let's start...
All you need is:​
Bootloader unlocked, using the official tool you find here
Latest version of miflash, which you can download from here;
SDK platform tools, which you can download from here;
Stock fastboot rom, which you can download from here, here or here.
Make a backup of your data because they will be deleted in the process!
Now that you have everything you need, follow the steps:​1) How to flash a stock rom using miflash.​
Unzip miflash to C:\ ; [Only for the first time]​
Unzip SDK platform tools to C:\ ; [Only for the first time]
Unzip the fastboot rom in the miflash folder;
Rename the fastboot rom folder with a shorter name and no spaces like "V12.5.6.0.RKHEUXM";
Disable driver signature enforcement in windows 10; [Only for the first time. It is a temporary option that is reactivated the next time the pc is restarted]
Spoiler: How to disable driver signature
1 - Open settings;
2 - Go to update and security;
3 - In the left column click on restore;
4 - Under advanced restart click on restart now;
The pc will restart in a blue screen, click in sequence:
1. Troubleshoot;
2. Advanced options;
3. Startup Settings;
4. Restart;
5. Press the 7 or F7 key to Disable driver signature.
Now the pc restarts by itself.
Go to the miflash folder in c:\, open it and search for XiaoMiFlash.exe, right click and start as administrator;
Click on the driver button at the top and then install (if a warning message comes out, install anyway); [Only for the first time]
Restart your pc; [Only for the first time]
Go to the miflash folder in c:\, open it and search for XiaoMiFlash.exe, right click and start as administrator;
Click on the select button at the top left and navigate to the fastboot rom folder in the window that opens, then press ok; (If you followed the guide it is located in C:\MiFlash20210226\namethatyougavetotherom);
Click on the clean all option at the bottom right;
Spoiler: Why clean all option
- The clean all option allows you to flash the rom avoiding blocking the bootloader (which I recommend);
- The save user data option allows you to flash the rom without deleting the data (not recommended if you come from custom rom or from stock rom of different regions and does not block the bootloader);
- The clean all and lock option instead at the end of the flash blocks the bootloader which in some cases especially if you flash a rom that is not the original and can lead to a brick of the phone (I do not recommend blocking the bootloader, but if you want to do it make sure you are on the stock rom of the same region your phone was born with).
Now in the phone enable debug USB in developer option;
Spoiler: Developer option
Enable developer option:
- Go to settings;
- Tap on my device;
- Tap on all specifications;
- 7 tap on miui version.
Debug USB:
- Go to settings;
- Other settings;
- Developer options;
- Debug USB.
Restart the phone in fastboot mode and connect it to a rear USB port or in any case to a USB 2.0;
Spoiler: Fastboot mode
Turn the phone off;
Long press of the power key + volume -.
If the phone is recognized by miflash its code appears in the first row of the table otherwise click the refresh button at the top right;
Make sure clean all is selected and click on flash;
The flash lasts several minutes wait without touching anything;
Surely miflash at the end of the flash will give an error because the clean all option is selected and not blocking the bootloader at the end of the process it recognizes it as an error. Do not worry!!! it's normal;
If all went well the phone should restart by itself, (attention! the first start of the phone lasts several minutes stuck on the miui logo, wait until the configuration screen appears.
2) How to flash a stock rom using cmd.​Small premise; You could easily use this method even just by starting the .bat file inside the fastboot rom, but if any problems should occur or at the end of the process the window would close immediately without giving you the time to understand what happened, while if you run the .bat file directly from the prompt (cmd) you have the possibility to check the whole flash process and see if any errors occur because the window will remain open anyway.​
Unzip miflash to C:\ ; [Only the first time to install drivers]​
Unzip SDK platform tools to C:\ ; [Only for the first time]
Unpack the fastboot rom and move all content to C:\platform-tools;
Disable driver signature enforcement in windows 10; [Only for the first time. It is a temporary option that is reactivated the next time the pc is restarted]
Spoiler: How to disable driver signature
1 - Open settings;
2 - Go to update and security;
3 - In the left column click on restore;
4 - Under advanced restart click on restart now;
The pc will restart in a blue screen, click in sequence:
1. Troubleshoot;
2. Advanced options;
3. Startup Settings;
4. Restart;
5. Press the 7 or F7 key to Disable driver signature.
Now the pc restarts by itself.
Go to the miflash folder in c:\, open it and search for XiaoMiFlash.exe, right click and start as administrator; [Only for the first time]
Click on the driver button at the top and then install (if a warning message comes out, install anyway); [Only for the first time]
Restart your pc; [Only for the first time]
Go to the start button with the mouse and click with the right button;
In the menu that will open click on command prompt (administrator) a cmd window will open;
Now in the phone enable debug USB in developer option;
Spoiler: Developer option
Enable developer option:
- Go to settings;
- Tap on my device;
- Tap on all specifications;
- 7 tap on miui version.
Debug USB:
- Go to settings;
- Other settings;
- Developer options;
- Debug USB.
Restart the phone in fastboot mode and connect it to a rear USB port or in any case to a USB 2.0;
Spoiler: Fastboot mode
Turn the phone off;
Long press of the power key + volume -.
Now in the cmd window you are in the path: C:\windows\system32. First we move to the platform tools folder and check if the pc recognizes the phone in fastboot (if you followed the guide it will be in C:\platform-tools) to move to the folder press this command and press enter:
Code:
cd c:\platform-tools
Now check if the pc recognizes the phone in fastboot with this command and press enter (The phone code should appear):
Code:
fastboot devices
If the code appears you can start the .bat file to start the flash, then type this command and press enter:
Code:
flash_all.bat
Spoiler: Why flash_all.bat
- The flash_all.bat allows you to flash the rom avoiding blocking the bootloader (which I recommend);
- The flash_all_except_storage.bat allows you to flash the rom without deleting the data (not recommended if you come from custom rom or from stock rom of different regions and does not block the bootloader);
- The flash_all_lock.bat instead at the end of the flash blocks the bootloader which in some cases especially if you flash a rom that is not the original and can lead to a brick of the phone (I do not recommend blocking the bootloader, but if you want to do it make sure you are on the stock rom of the same region your phone was born with).
The flash lasts several minutes wait without touching anything but you can follow the trend in case there are problems;
If all went well the phone should restart by itself, (attention! the first start of the phone lasts several minutes stuck on the miui logo, wait until the configuration screen appears.
I hope this guide can help you to get back or flash the stock rom.
Happy flash everyone!​
Click to expand...
Click to collapse
Thank You So Much - Get Back Device in normal Mode

Hello @RollDload
I have Flashed below Fastboot ROM in Mi11X India using the CMD method and working fine but I am surprised why I didn't get OTA for the next Version - Below Mentioned Update Tracker got from another post - My Bootloader is Unlocked - If I manually Update next version using recovery ROM then Can I flash without data lost? - If possible please let me know the solution
2021-04-20 | Stable Fastboot | V12.5.2.0.RKHCNXM (Currently Avalibale)
2021-05-25 | Stable Recovery | V12.5.3.0.RKHCNXM (Should Offer this via OTA as per my Assumption)

sunnymodh said:
Hello @RollDload
I have Flashed below Fastboot ROM in Mi11X India using the CMD method and working fine but I am surprised why I didn't get OTA for the next Version - Below Mentioned Update Tracker got from another post - My Bootloader is Unlocked - If I manually Update next version using recovery ROM then Can I flash without data lost? - If possible please let me know the solution
2021-04-20 | Stable Fastboot | V12.5.2.0.RKHCNXM (Currently Avalibale)
2021-05-25 | Stable Recovery | V12.5.3.0.RKHCNXM (Should Offer this via OTA as per my Assumption)
Click to expand...
Click to collapse
Hi, I'm glad it worked fine ...
First try to clear the update application data.
If you don't get the update try the recovery method, you shouldn't lose your data. Do a backup anyway to be sure ...

First of all thanks for the Response
I have already tried clear data of Update app, also login into Mi Account but non of the works
Now I will use the recovery method - will follow the below steps let me correct if I am going to do wrong steps
Download this ROM 2021-05-25 | Stable Recovery | V12.5.3.0.RKHCNXM
Put it into Device -> Choose update package - > will flash
Will take backup for Safety

Hi all!
Trying to flash stock ROM (On Linux, cmd command mode), i get following message: "Missmatching image and device" although my phone is a Poco F3 Alioth :/

sunnymodh said:
First of all thanks for the Response
I have already tried clear data of Update app, also login into Mi Account but non of the works
Now I will use the recovery method - will follow the below steps let me correct if I am going to do wrong steps
Download this ROM 2021-05-25 | Stable Recovery | V12.5.3.0.RKHCNXM
Put it into Device -> Choose update package - > will flash
Will take backup for Safety
Click to expand...
Click to collapse
Why not try the latest update directly? So there is no more need for the ota.
Remember that "CN" is the Chinese version.
"ID" the Indian version.
"MI" l "EEA" etc the global versions.
Use the one corresponding to the one you already have in use.
Otherwise flash what you would like with miflash but avoid blocking the bootloader.

nicfio said:
Hi all!
Trying to flash stock ROM (On Linux, cmd command mode), i get following message: "Missmatching image and device" although my phone is a Poco F3 Alioth :/
Click to expand...
Click to collapse
I don't know, I don't use linux, but try to check the drivers and make sure you use the right rom for your model, there are three versions, china india and global.

RollDload said:
Why not try the latest update directly? So there is no more need for the ota.
Remember that "CN" is the Chinese version.
"ID" the Indian version.
"MI" l "EEA" etc the global versions.
Use the one corresponding to the one you already have in use.
Otherwise flash what you would like with miflash but avoid blocking the bootloader.
Click to expand...
Click to collapse
Yes...Correct regarding latest flash
let me correct you regarding Version
ID - Indonesia ROM
IN - India ROM
I have changed ROM from India to another for Miui Dialer only but after installation, I found Xiaomi EU ROM much better than any other Region ROM
Chinese ROM - good but lots of bloatware, No Gapps
Xiaomi EU - Excellent Performance, MIUI Dialer with Gapps (you can download only from Xiaomi EU website (EU & EEA) both are different Version

Im stuck on
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
what to do?
edit:
okay so I panicked. lol
I disconnected the phone from pc then I realized it was a dumb move
the phone is still on fastboot though.
So I reconnected the phone to pc and it wont detect. I am worried that if I turned off my phone it will die.
So what I did next was hold power button and volume down trying my luck to get into fastboot again.
And it did boot into fastboot again.
Then using miflash and everything worked now im on stock rom. Thanks!
PS: Im so happy that I am still within Gods grace.

LynnnXDA said:
Im stuck on
View attachment 5557529
what to do?
edit:
okay so I panicked. lol
I disconnected the phone from pc then I realized it was a dumb move
the phone is still on fastboot though.
So I reconnected the phone to pc and it wont detect. I am worried that if I turned off my phone it will die.
So what I did next was hold power button and volume down trying my luck to get into fastboot again.
And it did boot into fastboot again.
Then using miflash and everything worked now im on stock rom. Thanks!
PS: Im so happy that I am still within Gods grace.
Click to expand...
Click to collapse
yes, unplugging the phone in the middle of a flash is very dangerous, but luck was on your side. better this way

Guys just wanted to clear a doubt i had
So currently I have a mi11x Indian version running miui 13
So my first question is if I unlock via miunlock and then flash custom ROMs (pixelexperience)
Will I be able to go back to stock rom and relock bootloader if in the future I need to go back to stock or something
Or will it cause a brick.

Please, you don't need to know this but I am disabled, get really low on energy really quick. Trying to solve this is driving me mad!
Mi 11 bought with CN stock.
Unlocked the bootloader, loaded global rom for miui 12, all worked well.
OTA didn't work though.
Updated yesterday to latest global rom. All seems to work except, Google Wallet which used to work great gives me their CTS error.
Nothing actually changed on the phone, it's still just the unlocked phone, stock global rom.
I tried loading an older 12.5 rom and then, did an OTA update to MIUI 13
Still, Google Wallet doesn't want to know.
Was considering flashing again with the stock global rom (I don't want the CN on there) and locking the boot again but, would that even work or, does it have to be the CN stock rom?
All the bypass options for the security are just beyond my mind now sadly.

[GUIDE][A107M] BL Unlock, Twrp, ROMs and Magisk

I am not responsible for any damage to your device, when you root you lose the Warranty
This guide collects A107F development info, but with the files ported to the A107M.
Thanks to the Galaxy A10s Development team for the original files.
You need to be on Android 10, if you are on android 11, there are tutorials to downgrade.
[BootLoader Unlock]
- Backup all your media, this process will delete your internal media including music and photos
- Go to developer settings and enable [OEM Unlock]
- Reboot to download mode (Turn off, press VOL- & VOL+ and connect the USB)
- When prompted, press and hold VOL + to enter bootloader unlock mode
- Press VOL + to confirm you want to unlock bootloader, this will wipe your data
- If you think the bootloader is fully unlocked, it is actually not! Samsung introduced VaultKeeper, meaning the bootloader will still reject any unofficial partitions before VaultKeeper explicitly allows it.
- Go through the initial setup. Skip through all the steps since data will be wiped again later when we flash TWRP and magisk
- Enable developer options, and confirm that the OEM unlocking option exists and is grayed out. This means the VaultKeeper service has unleashed the bootloader. This step is MANDATORY
- Perfect! Your bootloader now accepts unofficial images in download mode.
[Twrp Install]
At this point, you will need to install Odin on your PC.
Bootloader unlocked is OBLIGATORY.
On your MicroSD, put the "A10s-encryption-disabler.zip" file.
Boot to download mode, load "VBMeta" file in AP and "TWRP Ported to A107M" file in BL
- Disable [Auto Reboot] in Odin
- Flash
- Force a reboot by pressing VOL+, VOL - and POWER buttons at the same time
- With the USB connected, and after the screen goes black, IMMEDIATELY let go of all buttons and IMMEDIATELY press and hold VOL+ and POWER button at the same time to boot to TWRP Recovery
NOTE: TWRP on this phone is not perfect, after booting to it, the screen will remain black after the Samsung logo disappears, simply wait 10 seconds and press the power button 2 times to have acces to it.
- After booting to TWRP successfully, go to WIPE in TWRP
- At the bottom, you should see an option to FORMAT DATA. After you select it, you will be asked to type "yes" in your keyboard. If you do not see this, you probably selected the wrong option.
- After formatting data, flash the "A10s-encryption-disabler.zip" with TWRP. This is done to avoid future bootloops.
- Optional, flash "Magisk.zip" if you want to keep on Stock ROM with root.
- After doing this, boot back to system and you are done
- Wait patiently for the device to boot for the first time
[Custom ROMs Install]
Bootloader unlocked and TWRP isntalled are OBLIGATORY.
Most of the GSI ROMs of this forum works fine on this device.
Only download a64 ROMs, do not confuse with ARM64.
On your MicroSD, put the ROM image.
- Boot to TWRP
- Go to Wipe > Advanced
- Wipe ONLY the System partition
- Go to Install
- At the bottom, select option "Install Image"
- Search for your GSI. It should be something that ends in .img. If it ends in .xz instead, you need to extract the image first
- Optional, if you want Root, flash the "Magisk.zip" file
- Go to recovery main menu
- Go to Reboot
- Reboot to Recovery
- After that, go to Wipe and perform a Factory Reset
- Reboot to System and enjoy!
[Downloads]
>Everything you will need<

I had a problem in Odin an "RQT-CLOSE" error occurred

Lukas203 said:
I had a problem in Odin an "RQT-CLOSE" error occurred
Click to expand...
Click to collapse
I GOT THE SAME THING WHATS HAPPENNING?

Worked perfectly on a107m with binary 6

Alexander_SlowD said:
Worked perfectly on a107m with binary 6
Click to expand...
Click to collapse
If it worked for you, what procedure did you follow? What rom did you use for bit 6? what tools did you use?

It worked for me at first time I see TWRP menu but I didnt followed the instructions correctly , I've tried to do it by myself after that , then I got a unnoficial bootloader error and RQT_CLOSE error when trying to do the Odin process again .
Any working solution are welcome and I will be thankfully , please !

Luciannus said:
It worked for me at first time I see TWRP menu but I didnt followed the instructions correctly , I've tried to do it by myself after that , then I got a unnoficial bootloader error and RQT_CLOSE error when trying to do the Odin process again .
Any working solution are welcome and I will be thankfully , please !
Click to expand...
Click to collapse
The TWRP is slready working for me , now I trying the Magisk part , I did this on Android 11 binary 6 trough A107MUBS6CWA3_ZTO firmware ...

[GUIDE][ROOT][UNROOT] Rooting/UnRooting A505FN

In this post I'll describe my experience with Root and Unroot of Samsung Galaxy A505FN/DS (DualSim)
I wrote threads on XDA and called for help but I didn't always get it, so I had to look for solutions myself, which I'll share now.
[Root]​
[READ BEFORE START]​Bricking Samsung devices is reallyyyy hard - but If you mess something up - I'm not responsible for it.
Root, although it gives you new features, also takes away old ones
- Your Knox will be broken - there is no option to skip it, apps like Samsung Pass will never work again (even after unroot).
- Some applications will not be available in Google Play (e.g. Netflix), you can use another store such as Aurora Store, but it does not give a 100% guarantee that you will install the application you need.
- You won't pass SafetyNet attestation - you can use Magisk (Zygisk to be exact) + denylist modules for this, but it also doesn't always work (in my example it didn't work on Stock ROM).
- Unstable system... Almost, because as long as you root your phone, nothing should happen - however, I've already more than once downloaded a module for Magisk and after installing it the phone wouldn't reboot or the phone reset itself at least once in a few days, then you have to disable the module or do a Factory Reset, and doing a backup every time you install a module is not convenient.
- Banking apps - in my case, I wasn't able to add my card to Google Pay or use autocomplete in Google Chrome when I wanted to enter my credit card information. I was also unable to pay via NFC.
[START]​1. Make a backup - Rooting will earse all data that you have collected on your phone! You can make backup in your phone settings.
[Samsung Cloud] Settings -> Accounts & Backup -> Data with backup (Under Samsung Cloud Tab) -> Select Apps to backup | Then backup files & photos on Dropbox, Onedrive, Google Drive
[Google] Settings -> Accounts & Backup -> Data with backup (Under Google Drive Tab) -> Click "Make Backup now"
2. Enable Developer Options - Settings -> Phone - Information -> Software information -> Click about 10 times on "Version number" until you see the text "Developer mode has been activated" or until you have to enter the lock code
3. Unlock OEM in Developer Options - Settings -> Developer Options (on far bottom) -> Check "Unlock OEM"
4. Turn on USB Debugging - Developer Options -> Check "USB Debugging"
5. Download & install Samsung Drivers
6. Download ODIN
7. Download Platform Tools
8. Download OrangeFox (only for full root) (Credits to @Enzoaquino)
9. Download MultiDisabler
10. Turn off the phone, when it is turned off press Volume UP and Volume DOWN simultaneously and connect the phone to the computer using the USB cable and wait to screen turn on
11. You can see instructions on screen -> Long Press Volume UP, on next screen confirm unlocking bootloader by clicking Volume UP (All Your data will be earsed now!).
12. Your phone will be restarted two times, wait, after that, disconnect your phone from PC and configure your phone (you need connect to the internet) and do one more time step 2., 3. and 4., but after doing step 4. connect your phone to PC and wait to dialog box pop in -> hit "Always Allow from this PC", and then hit "Allow"
13. Open folder with platform tools (you need to see adb.exe file) and type "CMD" into directory path box and hit enter
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
13. You should see a command line window now - type "adb devices" and hit enter, this should print your android device connected to Your PC
14. If You see Your device, type "adb reboot download" and wait for Your phone to restart
15. When Your phone showing a "blue" screen with text "Downloading...", open ODIN on Your PC
Similar to this
16. In ODIN, Click AP button and pick OrangeFox file that you downloaded earlier
17. Go into "Options" tab and uncheck "Auto Reboot"
18. Click "Start"
19. After ODIN finish flashing, let a phone be still connected to Your PC, press Volume DOWN + Power button for 7 seconds and after Your screen goes black, fast press Volume UP + Power until You see OrangeFox Logo (on Orange Background)
20. Format Data by clicking Bin icon o bottom of Your screen, then click "Format Data" tab and type "yes" to confirm.
21. After that, copy MultiDisabler (multidisabler-samsung-3.1.zip) from Your PC to Your Phone and click this file on your phone in OrangeFox
22. Swipe to install this file
23. Do not click on "Reboot System"! You need to click "Back" then click last icon on bottom of your screen (3 - dash), then click "Reboot" and then select "Recovery". Your phone will reset and You can see that its stuck on Samsung logo -> wait a while and press Volume DOWN + Power for 7 seconds, Your phone will reset and turn on properly.
24. Configure, Connect to internet and open Magisk App (with default icon), It will say that "Magisk needs to download additional files and complete the installation" -> allow
25. After that, turn on Magisk App one more time, it will say the same message that on step previous -> allow
26. Open Magisk App, click "Update" button under "Magisk" panel (not on Magisk App panel) and under "Options" tab check "Recovery Mode" and click "Next" - wait until You will see "Reboot Device" button on bottom right of Your screen- click this button and after reset open Magisk App and check if Magisk App is updated too - if not, click update. (Thanks to @gosc747 for reminding me about this)
27. Your Phone should restart and... You have root on Your Phone, congrats!
[UnRoot]​
[READ BEFORE START]​- This will do Factory Reset
- You need to find a ROM that fits Your phone -> Here is the site that I recommend to download ROM for Samsung A505FN (A lot of ROMs, Full speed download and.. FREE).
What If I pick wrong ROM?
- It will not install but Your phone will still work,
- Some functions can stop working (example: Your screen will not autorotate)
[START]​So, after You pick a Samsung A505FN on that site, You need to know CSC Code for Your phone... But where You can find it?
If You still have original ROM:
1. (On Your phone) Go into settings -> Phone - Informations (on far bottom) -> software information -> Provider software version
2. here you will have your code
3. Type first part of that into Search Box on site that i provided
4. Download Selected ROM, repack this in folder of Your choose
5. Connect Your phone to Your PC
6. open Command Line (like in step 13. in rooting) and type "adb reboot download"
7. After reset, open ODIN, and place all files from Your ROM here
8. Click Start
9. Your Phone will reset automatically, after it's boots up, disconnect phone from pc and turn Your phone off
10. Press Volume UP + Volume DOWN and plug-in Your usb cable connected to Your PC
11. You will see "blue" screen, long press Volume UP and confirm Locking Bootloader by clicking Volume UP (this will earse all Your data).
12. And.. done!
Ask Something If You Want​I try to help​

Hmmmm why not use a modified kernel instead of patch recovery? When using patched recovery, you need to figure out the right button combinations to boot to system or recovery,whereas when you use patched kernel you can just simpky boot without button combinations.

JuanTamqd21 said:
Hmmmm why not use a modified kernel instead of patch recovery? When using patched recovery, you need to figure out the right button combinations to boot to system or recovery,whereas when you use patched kernel you can just simpky boot without button combinations.
Click to expand...
Click to collapse
I mean yee, if u wanna stay with original ROM but just have Magisk installed, then patching custom kernel is good idea - but if u want install custom ROM or something, its good to have custom recovery (besides the fact that you can patch custom kernel via custom recovery)

@TheWolf_Prod
I tried your guide on my Samsung Galaxy A50 (SM-A50FN / DS), I confirm it works
After entering Magisk, I choose to run in Recovery, it starts, but it does not go into Recovery, but normally on the phone
Tell me, do you know how to do this, how do I update to Magisk v24.3 via "Select and patch file"?
Because I downloaded from another TWRP and ROOT guide and I also have a problem with it
And I do on your tutorial as I did on my previous TWRP tutorial:
I choose the method "Select and patch a file" creates the AP magisk _patched for me, I transfer it to my laptop, turn off the phone and enter Download mode, run Odin (I deselect auto start), add files BL, AP (magisk_patched), CS, CSC, gives me start, loaded, exiting, from Download mode, starting Recovery mode, giving, restarting and bootloop is on

~ "I choose to run in Recovery, it starts, but it does not go into Recovery, but normally on the phone"
I guess this is Samsung's "unique feature" - the only option to enter OrangeFox/TWRP is turn phone off -> press Volume UP + Power and when phone vibrates, plug USB cable connected under PC to phone.
~ "After entering Magisk, I choose to run in Recovery, it starts, but it does not go into Recovery, but normally on the phone"
So - on my phone I noticed this problem:
Sometimes when I reset my phone (Either manually or through a dead battery) then after restarting - I lost ROOT privileges. Therefore, if for some reason you need to reset your phone - do it preferably through Magisk (main page -> click the "refresh" icon -> Reboot Recovery) then you can be sure that your phone will boot with ROOT privileges
If your phone has reset itself or you forgot to do it via Magisk - turn phone off -> press Volume UP + Power and when phone vibrates, plug USB cable connected under PC (or any device where you can copy files from it) to phone - then in OrangeFox/TWRP menu You need to click "Reset Recovery" and unplug USB Cable.
~ "Tell me, do you know how to do this, how do I update to Magisk v24.3 via "Select and patch file"?"
So, I don't use TWRP - if You have OrangeFox all You need to update Magisk is just click "Update" in Magisk App.
I read this on this website:
Choose “Select and Patch a File” in method, and select the AP tar file (from Your ROM)
Start the installation, and copy the patched tar file to your PC using ADB:
adb pull /sdcard/Download/magisk_patched_[random_strings].tar
DO NOT USE MTP as it is known to corrupt large files.
Reboot to download mode. Open Odin on your PC, and flash magisk_patched.tar as AP, together with BL, CP, and CSC (NOT HOME_CSC because we want to wipe data) from the original firmware.
If it still doesn't work then try to install Ypur ROM without the Magisk patch - maybe you downloaded the wrong ROM?

TheWolf_Prod said:
So - on my phone I noticed this problem:
Sometimes when I reset my phone (Either manually or through a dead battery) then after restarting - I lost ROOT privileges. Therefore, if for some reason you need to reset your phone - do it preferably through Magisk (main page -> click the "refresh" icon -> Reboot Recovery) then you can be sure that your phone will boot with ROOT privileges
If your phone has reset itself or you forgot to do it via Magisk - turn phone off -> press Volume UP + Power and when phone vibrates, plug USB cable connected under PC (or any device where you can copy files from it) to phone - then in OrangeFox/TWRP menu You need to click "Reset Recovery" and unplug USB Cable.
Click to expand...
Click to collapse
I wonder where the problem
TheWolf_Prod said:
So, I don't use TWRP - if You have OrangeFox all You need to update Magisk is just click "Update" in Magisk App.
I read this on this website:
Choose “Select and Patch a File” in method, and select the AP tar file (from Your ROM)
Start the installation, and copy the patched tar file to your PC using ADB:
adb pull /sdcard/Download/magisk_patched_[random_strings].tar
DO NOT USE MTP as it is known to corrupt large files.
Reboot to download mode. Open Odin on your PC, and flash magisk_patched.tar as AP, together with BL, CP, and CSC (NOT HOME_CSC because we want to wipe data) from the original firmware.
If it still doesn't work then try to install Ypur ROM without the Magisk patch - maybe you downloaded the wrong ROM?
Click to expand...
Click to collapse
I have OrangeFox at the moment, I've seen this link before and read it, unfortunately, it doesn't work, bootloop pops up and OrangeFox recovery is missing.
I have an official ROM:
Version Android: 11
Changelist: 22264509
Build Date Mon, 14 Mar 2022 03:20:54 +0000
Security Patch Level: 2022-03-01
Product code: XEO
PDA: A505FNXXS9CVC2
CSC: A505FNOXM9CVB1

When my phone has reset itself or I do it via Magisk, my device is stuck on the lock screen. Whenever I unlock my device, the screen turns black, not responding, or auto restart.
I tried to solve the issue by booting into Fox recovery, then turning on/off Magisk core, or using the Fox Reboot function to reboot into System or Recovery but it is impossible to solve the problem.

bellial7 said:
When my phone has reset itself or I do it via Magisk, my device is stuck on the lock screen. Whenever I unlock my device, the screen turns black, not responding, or auto restart.
I tried to solve the issue by booting into Fox recovery, then turning on/off Magisk core, or using the Fox Reboot function to reboot into System or Recovery but it is impossible to solve the problem.
Click to expand...
Click to collapse
flash pass reset zip

Hey would unrooting the device enable banking apps again?