Hay everybody
last week i tried to install with LG Flash Tool the last firmware 20F
after the instillation complete in successfully i don't have a status bar and blank screen without buttons
can somebody help me to fix it ?
thanks
(Right now i use in version 10l)
go here : http://lg-firmware-rom.com/ and download the kdz and reflash it. Do Factory Reset after that.
You mean enter to download mod and flash the KDZ and after I flash to Factory Reset from the system or hard reset from the phone ?
Hard reset is better for fixing issues than factory reset
Enviado desde mi LG-D855 mediante Tapatalk
rocco6victor said:
Hard reset is better for fixing issues than factory reset
Enviado desde mi LG-D855 mediante Tapatalk
Click to expand...
Click to collapse
i tried but is not working and i don't has an access to the internal storage
Hi guys i have a d855 g3 running kitkat i have tried every method to get twrp working but evey time after successfully flashing and rebooting to recovery mode it gives me the " fastboot mode started " but the phone is working fine it gives that just in recovery mode ....... Is there any way to get twrp working .....????
What procedure do you use to get to recovery? How did you install TWRP?
Enviado do meu LG-D855 através de Tapatalk
Spartan17 said:
What procedure do you use to get to recovery? How did you install TWRP?
Enviado do meu LG-D855 através de Tapatalk
Click to expand...
Click to collapse
Sorry for the delay. I installed twrp with twrp manager and flashify method and i did choose the right img file but it giving me the fastboot started evrery time
I have searched and i havent find a solution
I updated, im on OOS 4.0 with F2FS everything smooth and nice.
After setting up i try to flash twrp and once i boot into it it ask me for a password wich isnt the one i put.
I saw some people are in the same problem as i but i didnt see anything taht could help me at all.
I tried with the modified twrp, same thing,
I just want to get it root, any solutions?
Thanks
Well, I managed to get OOS4 with root and data partition as F2FS.
I followed this procedure and worked out just great ! https://forums.oneplus.net/threads/...g-dm-verity-error.484019/page-2#post-15558781
Not sure if you can skip some of the steps but right now I have OOS4, with root and TWRP (modified) working and capable of decrypting !
You are encrypted.. Decrypt flash Oos 4.0 directly after that flash SuperSU. I do recommend you using freedomos
DirtyWizard said:
Well, I managed to get OOS4 with root and data partition as F2FS.
I followed this procedure and worked out just great ! https://forums.oneplus.net/threads/...g-dm-verity-error.484019/page-2#post-15558781
Not sure if you can skip some of the steps but right now I have OOS4, with root and TWRP (modified) working and capable of decrypting !
Click to expand...
Click to collapse
It requires a USB Otg, but thanks!
I read that TWRP just needs to update their recovery in case I decide to wait
Enviado desde mi ONEPLUS A3000 mediante Tapatalk
Puddi_Puddin said:
You are encrypted.. Decrypt flash Oos 4.0 directly after that flash SuperSU. I do recommend you using freedomos
Click to expand...
Click to collapse
Can you provide me baby steps or refer to ones? My op3 and I will appreciate itt
Enviado desde mi ONEPLUS A3000 mediante Tapatalk
nickest said:
Can you provide me baby steps or refer to ones? My op3 and I will appreciate itt
Enviado desde mi ONEPLUS A3000 mediante Tapatalk
Click to expand...
Click to collapse
I do recommend you to wipe userdata then install freedomOS. (you can choose what you want and what you dont want with freedomos)
1. Boot your device into fastboot
2. Go to your Adb drivers and type "fastboot erase userdata"
3. Once that completed adb push the freedomos zip file. I do recommend 3.4 based on OOS 4.0 or you can do what ever you like. Note: to use adb push I do recommend you to put the install zip in the same folder as the adb drivers then type "adb push NAME_OF_ZIP.zip(or just press tab) /system/
4. If you go to TWRP you will find the installation zip under the folder system.
5. Once that's done boot and profit.
nickest said:
It requires a USB Otg, but thanks!
I read that TWRP just needs to update their recovery in case I decide to wait
Enviado desde mi ONEPLUS A3000 mediante Tapatalk
Click to expand...
Click to collapse
It does not require USB OTG. I managed to get it to work without. Just format Data to F2FS and reboot the phone in recovery.
You can then via MTP easily transfer the files and flash in TWRP.
DirtyWizard said:
It does not require USB OTG. I managed to get it to work without. Just format Data to F2FS and reboot the phone in recovery.
You can then via MTP easily transfer the files and flash in TWRP.
Click to expand...
Click to collapse
Don't! Do not use MTP the chance of corrupted files is to big, thats why Adb has been designed!
I decided not to update to 3.2.8 after reading all the bad reviews. Now that 4.0.2 is out and reviews are not so bad, im going to update to 4.0.2. I'm on OxygenOS 3.2.7 and the official OTA update installer is showing the message " Rooted device detected,update may fail."
After reading some posts about OTA updates failing for rooted users and causing loops, I manually downloaded 4.0.2 from here
http://downloads.oneplus.net/oneplus-3/oneplus_3_oxygenos_4.0.2/
Can someone please tell how to proceed now. ( Device is rooted, twrp and xposed installed )
Can i flash the downloaded update from TWRP ? can someone please give steps to update.
Thanks
just do a clean flash like any other rom. flash super su immediately after the rom without rebooting to get root access.
jaj473 said:
I decided not to update to 3.2.8 after reading all the bad reviews. Now that 4.0.2 is out and reviews are not so bad, im going to update to 4.0.2. I'm on OxygenOS 3.2.7 and the official OTA update installer is showing the message " Rooted device detected,update may fail."
After reading some posts about OTA updates failing for rooted users and causing loops, I manually downloaded 4.0.2 from here
http://downloads.oneplus.net/oneplus-3/oneplus_3_oxygenos_4.0.2/
Can someone please tell how to proceed now. ( Device is rooted, twrp and xposed installed )
Can i flash the downloaded update from TWRP ? can someone please give steps to update.
Thanks
Click to expand...
Click to collapse
I think the safest method is the following :
1. Make a copy of the Internal memory contents so that you can recover it at the end.
2. Reboot Fastboot and flash stock recovery by adb.
3. Reboot recovery and make full wipes from stock recovery (factory reset, cache and internal memory). At this point, data partition will have change to f2fs format.
4. Put the full 4.0.2 rom inside adb folder, reboot to Fastboot and connect the device to the computer again.
5. Install the rom and when it finishs, reboot system. When the rom is showed in the screen, reboot to Fastboot again and install the last official TWRP by adb again.
6. Reboot recovery, connect it to the pc and copy Supersu to the internal memory.
7. Switch it off from the pc, install Supersu from recovery and reboot system.
8. Copy the saved contents to the internal SD.
That's all...
Enviado desde mi ONEPLUS A3003 mediante Tapatalk
Crazyhat said:
I think the safest method is the following :
1. Make a copy of the Internal memory contents so that you can recover it at the end.
2. Reboot Fastboot and flash stock recovery by adb.
3. Reboot recovery and make full wipes from stock recovery (factory reset, cache and internal memory). At this point, data partition will have change to f2fs format.
4. Put the full 4.0.2 rom inside adb folder, reboot to Fastboot and connect the device to the computer again.
5. Install the rom and when it finishs, reboot system. When the rom is showed in the screen, reboot to Fastboot again and install the last official TWRP by adb again.
6. Reboot recovery, connect it to the pc and copy Supersu to the internal memory.
7. Switch it off from the pc, install Supersu from recovery and reboot system.
8. Copy the saved contents to the internal SD.
That's all...
Enviado desde mi ONEPLUS A3003 mediante Tapatalk
Click to expand...
Click to collapse
Why would you want to sideload the ROM and then perform a wipe to get f2fs, also with the stock recovery. It can be done via twrp itself and the ROM can be flashed normally via twrp.
Sent from my OnePlus3 using XDA Labs
bonham1988 said:
Why would you want to sideload the ROM and then perform a wipe to get f2fs, also with the stock recovery. It can be done via twrp itself and the ROM can be flashed normally via twrp.
Sent from my OnePlus3 using XDA Labs
Click to expand...
Click to collapse
I said this is the safest way to avoid the dm-verity message. Theoretically, what you propose is correct but it's not as safer. In fact, this forum is plenty of issues from people who tried to do it like you say.
Enviado desde mi ONEPLUS A3003 mediante Tapatalk
Crazyhat said:
I said this is the safest way to avoid the dm-verity message. Theoretically, what you propose is correct but it's not as safer. In fact, this forum is plenty of issues from people who tried to do it like you say.
Enviado desde mi ONEPLUS A3003 mediante Tapatalk
Click to expand...
Click to collapse
No there are no issues with it apart from the DM verity splash screen. If you doing a clean install you should not have any issue and if DM verity is such a big deal you can also flash 3.2.8 or 3.5.5 forward to get rid of it.
Sent from my OnePlus3 using XDA Labs
jaj473 said:
I decided not to update to 3.2.8 after reading all the bad reviews. Now that 4.0.2 is out and reviews are not so bad, im going to update to 4.0.2. I'm on OxygenOS 3.2.7 and the official OTA update installer is showing the message " Rooted device detected,update may fail."
After reading some posts about OTA updates failing for rooted users and causing loops, I manually downloaded 4.0.2 from here
http://downloads.oneplus.net/oneplus-3/oneplus_3_oxygenos_4.0.2/
Can someone please tell how to proceed now. ( Device is rooted, twrp and xposed installed )
Can i flash the downloaded update from TWRP ? can someone please give steps to update.
Thanks
Click to expand...
Click to collapse
Consider one Thing: There is no xposed available so far. That's why I stay with 3.2.8.
---------- Post added at 12:44 PM ---------- Previous post was at 12:38 PM ----------
Crazyhat said:
I think the safest method is the following :
1. Make a copy of the Internal memory contents so that you can recover it at the end.
2. Reboot Fastboot and flash stock recovery by adb.
3. Reboot recovery and make full wipes from stock recovery (factory reset, cache and internal memory). At this point, data partition will have change to f2fs format.
4. Put the full 4.0.2 rom inside adb folder, reboot to Fastboot and connect the device to the computer again.
5. Install the rom and when it finishs, reboot system. When the rom is showed in the screen, reboot to Fastboot again and install the last official TWRP by adb again.
6. Reboot recovery, connect it to the pc and copy Supersu to the internal memory.
7. Switch it off from the pc, install Supersu from recovery and reboot system.
8. Copy the saved contents to the internal SD.
That's all...
Enviado desde mi ONEPLUS A3003 mediante Tapatalk
Click to expand...
Click to collapse
One question to your procedure:
Which version of stock recovery do you use in this procedure? Since you make a full wipe before installing anything else to f2fs I assume, it must be the latest version. Do you have a download link to this for safety reasons? Tks a lot!
bonham1988 said:
No there are no issues with it apart from the DM verity splash screen. If you doing a clean install you should not have any issue and if DM verity is such a big deal you can also flash 3.2.8 or 3.5.5 forward to get rid of it.
Sent from my OnePlus3 using XDA Labs
Click to expand...
Click to collapse
Dm-verity is a problem for many people. I won't need to go back to 3.2.8 rom again if previously I did it well so, in my modest opinion, it's much better to ensure that it doesn't happen. Anyway, you can do it whatever you like. It's not my business.
Enviado desde mi ONEPLUS A3003 mediante Tapatalk
Crazyhat said:
Dm-verity is a problem for many people. I won't need to go back to 3.2.8 rom again if previously I did it well so, in my modest opinion, it's much better to ensure that it doesn't happen. Anyway, you can do it whatever you like. It's not my business.
Enviado desde mi ONEPLUS A3003 mediante Tapatalk
Click to expand...
Click to collapse
You don't actually have to go to 3.2.8 ROM. You just have to flash the firmware and modem. And DM verity is subjective there are many people myself included who don't find that extra splash screen an issue at all.
Sent from my OnePlus3 using XDA Labs
Sir Backe said:
Consider one Thing: There is no xposed available so far. That's why I stay with 3.2.8.
---------- Post added at 12:44 PM ---------- Previous post was at 12:38 PM ----------
One question to your procedure:
Which version of stock recovery do you use in this procedure? Since you make a full wipe before installing anything else to f2fs I assume, it must be the latest version. Do you have a download link to this for safety reasons? Tks a lot!
Click to expand...
Click to collapse
The safest place for that is the OnePlus site. You have to flash v2 which is the latest version. The OnePlus site will merely show you one link without indicating whether it is for v1 or v2. You can go ahead and download it as it is the v2.
bonham1988 said:
You don't actually have to go to 3.2.8 ROM. You just have to flash the firmware and modem. And DM verity is subjective there are many people myself included who don't find that extra splash screen an issue at all.
Sent from my OnePlus3 using XDA Labs
Click to expand...
Click to collapse
Ok, great! I have been several months with it too, but only because It never was a trouble for me neither.
---------- Post added at 02:29 PM ---------- Previous post was at 02:13 PM ----------
Sir Backe said:
Consider one Thing: There is no xposed available so far. That's why I stay with 3.2.8.
---------- Post added at 12:44 PM ---------- Previous post was at 12:38 PM ----------
One question to your procedure:
Which version of stock recovery do you use in this procedure? Since you make a full wipe before installing anything else to f2fs I assume, it must be the latest version. Do you have a download link to this for safety reasons? Tks a lot!
Click to expand...
Click to collapse
Probably, this is not the last version, but it works fine. Right now I'm working and I hope you'll understand that I don't have enough time to look for the last version. Anyway, I leave you this link just in case it is useful for you....
https://s3.amazonaws.com/oxygenos.oneplus.net/recovery.img
@Crazyhat
Tks for the link. I just downloaded it from the Oneplus Website according to @tnsmani recommendation. I didn't actually know that it is there, hidden in the depth of the OP Website mess .
Sir Backe said:
@Crazyhat
Tks for the link. I just downloaded it from the Oneplus Website according to @tnsmani recommendation. I didn't actually know that it is there, hidden in the depth of the OP Website mess .
Click to expand...
Click to collapse
Hahaha.... You will have to trust them [emoji4] [emoji106]
Enviado desde mi ONEPLUS A3003 mediante Tapatalk
Hello everyone.
I have installed TWRP and wiped everything. But now I can't do anything. I have TWRP installed only. And I cant access to the internal storage with my PC and TWRP. What can I do?
Thanks.
Mi 10T Pro Apollo.
AimCraviTe said:
Hello everyone.
I have installed TWRP and wiped everything. But now I can't do anything. I have TWRP installed only. And I cant access to the internal storage with my PC and TWRP. What can I do?
Thanks.
Mi 10T Pro Apollo.
Click to expand...
Click to collapse
I had the same problem.I used pendrive USB with rom .I installed from TWRP recovery by OTG source. (Sorry for my terrible english).
QbaTheRipper said:
I had the same problem.I used pendrive USB with rom .I installed from TWRP recovery by OTG source. (Sorry for my terrible english).
Click to expand...
Click to collapse
Hey. Thanks for replying. Yesterday I just fixed it by installing stock rom via Mi Fastboot.
AimCraviTe said:
Hello everyone.
I have installed TWRP and wiped everything. But now I can't do anything. I have TWRP installed only. And I cant access to the internal storage with my PC and TWRP. What can I do?
Thanks.
Mi 10T Pro Apollo.
Click to expand...
Click to collapse
Hi.
I had the same problem. The first time I had to install Rom using otg.
But the second time I realized that turning off every security system (face recognition, fingertips etc...) and restarting TWRP again, then it worked properly.
I hope this may help you