Related
There has been a firmware upgrade waiting to be installed since 12/12 on my international version 7100. Coincidentally, or not, that's when I entered the phone's country of origin again, so the upgrade may have been available for much longer.
Has anyone successfully installed it without breaking anything, and could tell me what version of Android it is? I am currently on 4.4.2, guess it's too much to hope for 5, so it's likely just 4.4.4?
Usually, I don't think twice about firware upgrades, and just dl and install, but my Note II is paired with a Gear S, and I am a bit worried the upgrade may break connectivity or functionality.
Hello,
I am looking to manually upgrade my UK p600 to android 5 using the spanish version since I cannot wait any longer, but having not done it before I wondered how this affects further updates.
Will the Android 5 keep itself up to date? Also if the OTA lollipop finally does arrive in the UK would that be an issue?
Thanks for your help,
James.
Clacker said:
Hello,
I am looking to manually upgrade my UK p600 to android 5 using the spanish version since I cannot wait any longer, but having not done it before I wondered how this affects further updates.
Will the Android 5 keep itself up to date? Also if the OTA lollipop finally does arrive in the UK would that be an issue?
Thanks for your help,
James.
Click to expand...
Click to collapse
Hi James,
I'd personally recommend using the XAR (Cellular South) version, because it is more stable than the Spanish version.
As for further updates, if you have rooted your device and tripped Knox, you can't get OTA updates, as far as I know. However, if your device has never been rooted, you should be able to update it in future OTA.
I can safely say that the Lollipop is worth it, that's for sure. It is a massive improvement from KitKat, so if you can go for it, go for it. (The following is just my advice, you don't have to do it for it to work, but I personally like to do a completely clean flash, with a full factory reset, to ensure maximum stability.)
furzewolf said:
Hi James,
I'd personally recommend using the XAR (Cellular South) version, because it is more stable than the Spanish version.
As for further updates, if you have rooted your device and tripped Knox, you can't get OTA updates, as far as I know. However, if your device has never been rooted, you should be able to update it in future OTA.
I can safely say that the Lollipop is worth it, that's for sure. It is a massive improvement from KitKat, so if you can go for it, go for it. (The following is just my advice, you don't have to do it for it to work, but I personally like to do a completely clean flash, with a full factory reset, to ensure maximum stability.)
Click to expand...
Click to collapse
Thanks for the feedback, very helpfull indeed.
I have tried to update my chinese XT1635-03 to 7.1.1 with OTA through ADB sideload and unfortunately it is not working.
I have sucessfully flashed the phone with reteu latest firmware with April security patch (ADDISON_NPNS25.137-24-1-9_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml) through fastboot.
But once I try to sideload 7.1.1 OTA (Blur_Version.26.1.22.addison.retail.en.US) the process terminates at 47% with notification that the package expects product name "addison" but actual value is "addison_retcn"
Is it possible to either change the product name or disable such check of product name? It seems to me, that at the moment there is no way to flash OTA and I need to wait for full 7.1.1 image.
Reading similar questions around, I have to ask. Why you people cannot wait couple of weeks to get OTA? Instead of risking to brick your device?
New update is not bringing revolutionary/awesome/amazing/mind blowing... new features. I understand if it's update to completely new Android version or that your device/region will not get update at all.
Sent from my XT1635-02 using Tapatalk
You have XT1635-03 and the update is for XT1635-02. So if you have a reteu phone you can really update over sideload without issues. And yes, I need android 7.1.1 and I wouldn't wait one day longer. I need app-shortcuts, because I had this on my old phone, too. There was android 7.1 since the first day. But if you don't have it before you can't miss it. So you can wait much easier For me it was important for other issues, too. For example Wifi problems and stability fixes and over 100 security fixes. Many reasons for the update
Edit: And one more reason for the update: To help google to get more than 0.6% for android 7.1 We should update all, otherwise android 7.1 will never get 1%
Everybody should help to get this 1% maybe next month. So update, just do it for the 1%, yes xD
:silly::good:
The reason is simple: I do not want to use chinese firmware and flashed reteu with fastboot. As OTA channel is still retcn I will not get any OTA over the air. I expected that it is possible to manually sideload OTA but I was wrong as OTA checks the name of the device.
freeman_g said:
The reason is simple: I do not want to use chinese firmware and flashed reteu with fastboot. As OTA channel is still retcn I will not get any OTA over the air. I expected that it is possible to manually sideload OTA but I was wrong as OTA checks the name of the device.
Click to expand...
Click to collapse
The point is, how can you change the channel...
freeman_g said:
The reason is simple: I do not want to use chinese firmware and flashed reteu with fastboot. As OTA channel is still retcn I will not get any OTA over the air. I expected that it is possible to manually sideload OTA but I was wrong as OTA checks the name of the device.
Click to expand...
Click to collapse
OK, makes sense for you but for many/most others is just matter of time.
I'm not blaming anyone. Do whatever you want with your phone, just be ready if something goes wrong
The surprise was a different phone name. Different channel is usually not a problem
freeman_g said:
The surprise was a different phone name. Different channel is usually not a problem
Click to expand...
Click to collapse
Flash a custom ROM, I have been warning people not to flash ota's cause eventually your going to end up hard bricked.
There's no possible way safely to change your channel.
Stock firmware that is an ota always has checks during the flashing process, which prevents bricking devices.
I always suggest if your running stock firmware on moto devices then remain on your firmware that is specifically designed for your channel.
If you want the latest that android offers, custom ROMs are your best bet.
I have had many moto devices and almost every brick was so idiot that flashed Firmware and bootloaders and accepted an ota and bam HARD BRICKED
flashallthetime said:
Flash a custom ROM, I have been warning people not to flash ota's cause eventually your going to end up hard bricked.
There's no possible way safely to change your channel.
Stock firmware that is an ota always has checks during the flashing process, which prevents bricking devices.
I always suggest if your running stock firmware on moto devices then remain on your firmware that is specifically designed for your channel.
If you want the latest that android offers, custom ROMs are your best bet.
I have had many moto devices and almost every brick was so idiot that flashed Firmware and bootloaders and accepted an ota and bam HARD BRICKED
Click to expand...
Click to collapse
Oh no, can't go back. What can I do now? But all is working. Can it be that my reteu phone will be bricked after next OTA?
allrightlite said:
Oh no, can't go back. What can I do now? But all is working. Can it be that my reteu phone will be bricked after next OTA?
Click to expand...
Click to collapse
I have no idea
flashallthetime said:
I have no idea
Click to expand...
Click to collapse
Is it ever happend?
But is the US-version not always the same as the EU-version? The only difference is over which channel it comes.
allrightlite said:
Is it ever happend?
But is the US-version not always the same as the EU-version? The only difference is over which channel it comes.
Click to expand...
Click to collapse
If you are not 100% bone stock and unmodified, there is always some risk when accepting an OTA carrier update. On any device. Some the risks are bigger than others. Moto seems to be fairly high risk in this regard.
If you want OTAs, and you want to be safe, don't modify anything. If you insist on mods (which I usually do, but not yet on MZP) then always update via a manual method, never accept an OTA.
dandrumheller said:
If you are not 100% bone stock and unmodified, there is always some risk when accepting an OTA carrier update. On any device. Some the risks are bigger than others. Moto seems to be fairly high risk in this regard.
If you want OTAs, and you want to be safe, don't modify anything. If you insist on mods (which I usually do, but not yet on MZP) then always update via a manual method, never accept an OTA.
Click to expand...
Click to collapse
I have all 100% stock. And all is working after update. Seems there is really no difference between US and EU channel. Can't find any changes. So OTA should work in future. But sure, there are channel with differences, for example the chinese version is not the same.
allrightlite said:
I have all 100% stock. And all is working after update. Seems there is really no difference between US and EU channel. Can't find any changes. So OTA should work in future. But sure, there are channel with differences, for example the chinese version is not the same.
Click to expand...
Click to collapse
If you sideloaded an update, you are no longer 100% bone stock. Welcome to beta tester land.
dandrumheller said:
If you sideloaded an update, you are no longer 100% bone stock. Welcome to beta tester land.
Click to expand...
Click to collapse
It feels not like a beta. It's more like a big bug fix with much patches. For example my Wifi is now stable as hell and never reconnections anymore. Hope it keeps stable, but looks very very good. I think this beta will be the final release in few months, or weeks? But it's much better than 7.0. And better than LOS14.1, which is not so stable (on my other phone). And I have no app crashes anymore. Gboard was crashing with 7.0 one time and few other apps like firewall. So, 7.1.1 is pure stable as hell and must have :laugh:
Afaik, it's not beta. It's soak. So, if test users reported as stable, it will be pushed to all as the final build. If not, Moto has to fixed and not all users around the world will be affected.
Regular and recommend way of releasing update.
Sent from my LG-V940n using Tapatalk
Here you can see that it's not test-keys like a nightly from LOS. It's really release keys :laugh:
If you are on XT1635-03 with reteu frmware you will not receice any OTA. My experience told that you can't even sideload an update. So no worry about bricks.
Very often devices are hardbricked when you are downgrading bootloader but once I have hardbricked my Nexus 6 with OTA (sideloading it). Well, it was not full brick, but I can't load the system (only fastboot) and my bootloader was locked. Without system loaded you can't allow unlocking procedure so the first thing I do with new phone is unlocking.
allrightlite said:
Here you can see that it's not test-keys like a nightly from LOS. It's really release keys :laugh:
Click to expand...
Click to collapse
I know the build is not a beta. I'm referring to the fact that once you leave the official upgrade path, taking any update is a scenario not tested by Moto. So you are testing for them. Maybe you win, maybe you brick.
It seems that the problem with "addison_retcn" may be fixed with editing build.prop but in this case systemless root is required (AFAIK there us no systemless root for Nougat)
Question related to "After updating, you will not be able to downgrade..." message
Hope you guys are safe and well.
Currently my A50 on August update. I have no problems with this update but I like to update to Android 10 for additional features. I'm reluctant to update because of this message. I'm afraid that if I had problems or something wrong with the new update, I won't be able to go downgrade to August update.
So, Is it really impossible to downgrade using Odin with an official firmware?
I'm coming from iOS and hence the fear of updating. As you may know, iOS downgrade is impossible when Apple sign-out the old software.
Thanks in advance.
Most major OS updates (i.e. from Android 9 to 10) also update the 'bootloader', which is a little piece of software that initializes your device, and runs before the system can even start (when you turn your phone on).
Once the bootloader is updated, it's often impossible and certainly not recommended to downgrade the OS, since you may permanently brick your device.
If Android 10 is out for your device model (eg. A505G in my case), just go ahead and update. I don't have any issues with it whatsoever, in fact it has fixed quite a few bugs (wifi connection would frequently drop for me in Pie with February/March updates, and now it doesn't anymore).
Greetings.
pripyaat said:
Most major OS updates (i.e. from Android 9 to 10) also update the 'bootloader', which is a little piece of software that initializes your device, and runs before the system can even start (when you turn your phone on).
Once the bootloader is updated, it's often impossible and certainly not recommended to downgrade the OS, since you may permanently brick your device.
If Android 10 is out for your device model (eg. A505G in my case), just go ahead and update. I don't have any issues with it whatsoever, in fact it has fixed quite a few bugs (wifi connection would frequently drop for me in Pie with February/March updates, and now it doesn't anymore).
Greetings.
Click to expand...
Click to collapse
But can't I backup the boot loader too? Also, I heard that the official firmware includes the boot loader and therefore I won't have problems downgrading. I'm confused.
Screen not responding after update
Hi. I updated to the new Android 10 which my phone prompt me to install. But after updating, my screen is not responding anymore. I already tried to restart and factory reset. What can i do regarding this? Thank you very much!
sheidyly said:
Hi. I updated to the new Android 10 which my phone prompt me to install. But after updating, my screen is not responding anymore. I already tried to restart and factory reset. What can i do regarding this? Thank you very much!
Click to expand...
Click to collapse
Try to flash the ROM manually using ODIN
redymedan said:
Try to flash the ROM manually using ODIN
Click to expand...
Click to collapse
I'm sorry but I'm new to all of this and I seem to read some comments saying the phone was bricked after flashing.
And if I will try flashing, do I use the old firmware or the new one?
Thank you so much!
mistpsn said:
But can't I backup the boot loader too? Also, I heard that the official firmware includes the boot loader and therefore I won't have problems downgrading. I'm confused.
Click to expand...
Click to collapse
I think... and I could be completely wrong, but it keeps track of the highest version of bootloader you installed. So it will not allow you to boot if you flash the older one. However, I am not sure how it behaves if the bootloader is unlocked.
If anyone have the same concerns I had. I found out that only security updates seems to have this message and risk bricking your phone in case you downgrade to lower version. Some people confirms that they were able to downgrade without any problems from android 10 to android 9 on their A50.
It also made sense that there are no problems since the warning message only included with security updates. The android 10 Update change list have no warnings related to downgrading to older versions.
March security update had the warning message. And I had to do the security upgrade before the android 10 update was available OTA.
Just checked My daughters mi 10t lite and to My surprise it still runs 12.0.8.0
It seems there are newer versions but her Phone says that No newer version is avalilable when searching.
Also it seems Android security level is december 2020 which seems very outdated.
IT seems that there are newer versions so why Will the Phone not find Them.?
Mine is the same. Its my first Xiaomi and it surprised me too.
New ROMs are available for download in the app "MIUIdownloader" and instructions on how to install them can be found here:
How to Install Android Updates on Xiaomi, Mi, Redmi, and POCO smartphones with MIUI
Follow these instructions install Android updates / Stock MIUI Recovery and Fastboot ROMs on Xiaomi, Mi, Redmi and POCO smartphones.
www.xda-developers.com
The article says however that the ROMs are available in either Recovery or Fastboot formats, but for mine (Gaugin EEA) there is an "OTA" version available also. Strange that the OTA update isn't actually available "OTA"...
I haven't installed any yet as I only started looking today but I'm a newbie with stuff like this so I'll wait and see if anyone else chimes in and gives us some more pointers. I don't really want to brick my phone!
here you can find the latest EEA roms (12.5.7.0) with 2021 october patchlevel
Redmi Note 9 Pro 5G / Mi 10i / Mi 10T Lite (gauguin) Europe (EEA) Fastboot & Recovery ROM | XiaomiROM.com
Xiaomi Redmi Note 9 Pro 5G / Mi 10i / Mi 10T Lite (gauguin) Europe (EEA) official ROM, include stable, weekly and beta MIUI firmware which can be …
xiaomirom.com
When you scroll up to the top of the page you can find all variants.
Always be sure you download the corresponding RECOVERY image!
Then copy it to your device.
Open settings/ about Phone
tap a couple of times on the middle of the screen, till you get the notification "additional update features on" or similiar.
When you go now to the upper right corner w. the 3 dots, you will now see some new entries, select "Choose update package", then select the downloaded recovery image, and install it.
In your case, since your Versions are heavy outdated I recommend a full backup prior - it can mess up some settings or files.
Overandout said:
Mine is the same. Its my first Xiaomi and it surprised me too.
New ROMs are available for download in the app "MIUIdownloader" and instructions on how to install them can be found here:
How to Install Android Updates on Xiaomi, Mi, Redmi, and POCO smartphones with MIUI
Follow these instructions install Android updates / Stock MIUI Recovery and Fastboot ROMs on Xiaomi, Mi, Redmi and POCO smartphones.
www.xda-developers.com
The article says however that the ROMs are available in either Recovery or Fastboot formats, but for mine (Gaugin EEA) there is an "OTA" version available also. Strange that the OTA update isn't actually available "OTA"...
I haven't installed any yet as I only started looking today but I'm a newbie with stuff like this so I'll wait and see if anyone else chimes in and gives us some more pointers. I don't really want to brick my phone!
Click to expand...
Click to collapse
If/When you do the update, please report back what version you selected and if it did indeed needed af factory reset to work properly.
To be honest i think it is pretty poor, that this not just works out of the box, i have never heard of another brand where the OTA did not work, it's such a bacis function and i must confess, that if it ends up, needing me to do manual upgrading, this will heavily affect my will to buy og recommend anyone to buy a Xiaomi phone.
It seems the expression "You get what you pay for" is right in this instance, and i would certainly rather have paid a bit more to get something that just works, if i had known that even this basic feature did no work.
I wonder, if i update the phone manually to the latest firmware, if it will get the next updates OTA or this is a recurring thing, to do manual upgrades every time ..
Check you full FW version (including letters) - some ROMs are provided by phone operators and these are well known to delay or block the updates. Global ROMs should not show this behavior, I receive all OTA updates on time (or I just download and apply them manually as described by y1nk0).
Thanks for the suggestions but it didn't work.
I pasted the zip file into the phone memory and selected it in the update menu. The error message was Not possible to verify the update. You cannot flash this ROM, or along those lines.
It isn't an operator branded phone and it was brand new out of the box a few days ago so I suppose its possible that it gets an OTA update in the future, but yeah, I'm pretty disappointed with the phone in general really and was hoping that some of the poor features would be improved with an update to Android 11.
Its a work phone so at least I didn't pay for it, but it also means that I can't really do anything which might brick it, I got it to replace a Samsung A50 which I dropped and killed so I have to be careful!
The current ROM is 12.0.8.0(QJSEEUXM) which seems to be an official Mi ROM dated 22 Dec 2021.
I will check the full firmware version and post it here when i get home, but my daughters phone was bought from a large generic electronic retailer and it was bought without any subscription to any phone company and it has no visible branding at all, so i highly doubt that it will be because of this.
But as said...I will post the exact firmware version of the phone later, it would be interesting to see if it is the same as "overandout" has.
I dont know if the phone has actually ever received any updates, but i doubt it, as the safety level is December 2020, and she bought the phone in 2021.
Maybe there is a bug in that particular firmware that prevents it from succesfully updating.
I am thinking of maybe returning the phone to the shop, and reporting it to be faulty, because of the inability to upgrade.
Nowadays firmware and firmware updates are a big part of keeping a phone in "good working order" so the inability to update is certainly in my book to be consideres a serious flaw / defect.
I dont mind to update it manually to be honest, but i would expect it to then begin, updating by itself, i dont want to have to do manual updating every x months.
xsatquest said:
I will check the full firmware version and post it here when i get home, but my daughters phone was bought from a large generic electronic retailer and it was bought without any subscription to any phone company and it has no visible branding at all, so i highly doubt that it will be because of this.
But as said...I will post the exact firmware version of the phone later, it would be interesting to see if it is the same as "overandout" has.
I dont know if the phone has actually ever received any updates, but i doubt it, as the safety level is December 2020, and she bought the phone in 2021.
Maybe there is a bug in that particular firmware that prevents it from succesfully updating.
I am thinking of maybe returning the phone to the shop, and reporting it to be faulty, because of the inability to upgrade.
Nowadays firmware and firmware updates are a big part of keeping a phone in "good working order" so the inability to update is certainly in my book to be consideres a serious flaw / defect.
I dont mind to update it manually to be honest, but i would expect it to then begin, updating by itself, i dont want to have to do manual updating every x months.
Click to expand...
Click to collapse
So did you try the method posted by y1nk0? What happened?
The problem with loading the new ROM any other way is that we will be voiding the warranty...
Overandout said:
So did you try the method posted by y1nk0? What happened?
The problem with loading the new ROM any other way is that we will be voiding the warranty...
Click to expand...
Click to collapse
Hi
No i did not try anything yet, y1nk mentions that since the version is very outdated to make a backup, and i have not had time to do this yet.
Will probably do it this weekend, but i kind of need to have her make a backup of her phone....And i dont even know if she thinks it's worth the trouble if she has to start the phone from scratch after the update.
Teenagers have a LOT of apps and stuff on their phone, it's not just a matter of 5 minutes and she is ready to have her phone potentially reset to factory standard
But seeing as you had no luck i am not holding my breath for that method tbh. : )
Fair enough, I didn't bother with the back up because the phone is so new I hardly have anything configured anyway.
Overandout said:
Fair enough, I didn't bother with the back up because the phone is so new I hardly have anything configured anyway.
Click to expand...
Click to collapse
If you're on V12.0.8.0.QJSEUXM, I would try updating to V12.0.1.0.RJSEUXM first. Sometimes it's not possible to skip one or more updates and you have to install them one by one.
Chronological list of updates with download links: https://xiaomifirmware.com/roms/download-latest-miui-roms-for-mi-10t-lite/
_mysiak_ said:
If you're on V12.0.8.0.QJSEUXM, I would try updating to V12.0.1.0.RJSEUXM first. Sometimes it's not possible to skip one or more updates and you have to install them one by one.
Chronological list of updates with download links: https://xiaomifirmware.com/roms/download-latest-miui-roms-for-mi-10t-lite/
Click to expand...
Click to collapse
That makes sense. I went the other way and tried to install the penultimate version (12.5.6.0) but that gave the same error as the latest..
I'll try the "sequential" approach later.
Overandout said:
That makes sense. I went the other way and tried to install the penultimate version (12.5.6.0) but that gave the same error as the latest..
I'll try the "sequential" approach later.
Click to expand...
Click to collapse
Well, it was worth a try!
Exactly the same result unfortunately.
Not too sure what to try next really.
So i tried a bit here.
What she has is a phone that has the following firmware installed
MIUI Global 12.0.8.0
Stable
12.0.8.0 (QJSEUXM)
So i tried downloading the MIUI downloader tool and selected older versions, and downloaded the firmware called miui_GAUGINEEAGlobal_V12.0.1.0.RJSEUXM_15bfbef742_11.0.zip
put it in a folder called "downloaded_rom", went to the install updates, pressed the MIUI logo to make the "install from package" appear, selected this file and then it chewed on the file for 10-20 seconds and then it just says :
"Can not confirm update"
"Sorry, flash to this stable version is not allowed"
It feels really strange that a phone that has a firmware version called QJSEUXM is unable to update to a version called RJSEUXM
The only difference is that Q has become R, and since R comes right after Q in the alphabet, i would assume that this is the next version.
I am at a loss here, and the posts i made on the official Xiaomi forum, has gone unanswered.
One weird thing though.
I would expext firmware version 12.0.8.0 to be newer than 12.0.1.0. The naming of version seems a bit strange ??
The 12.0.1.0 version is android 11 and the 12.0.8.0 is android 10, so the 12.0.1.0 is newer it seems.
Still, makes no sense that it can not be updated, the file i downloaded is 2,5 Gbyte, so clearly a full image, not just incremental
Try to change your region in system settings (you might even receive an OTA update), updates are sometimes blocked for whatever reason for a particular country. India/China are usually first to receive an update, so they might work.
MIUI sub-version numbers are reset after major Android upgrade, so V12.0.1.0.RJSEUXM (MIUI12 Android 11) is newer than V12.0.8.0.QJSEUXM (MIUI 12 Android 10).
Btw. it seems that there was one more ROM update before moving to Android R (V12.0.9.0.QJSEUXM), you could have more luck with its installation.
List of all ROMs (sort by date and look for EU ROMs): https://xiaomifirmwareupdater.com/archive/miui/gauguin/
_mysiak_ said:
Try to change your region in system settings (you might even receive an OTA update), updates are sometimes blocked for whatever reason for a particular country. India/China are usually first to receive an update, so they might work.
MIUI sub-version numbers are reset after major Android upgrade, so V12.0.1.0.RJSEUXM (MIUI12 Android 11) is newer than V12.0.8.0.QJSEUXM (MIUI 12 Android 10).
Btw. it seems that there was one more ROM update before moving to Android R (V12.0.9.0.QJSEUXM), you could have more luck with its installation.
List of all ROMs (sort by date and look for EU ROMs): https://xiaomifirmwareupdater.com/archive/miui/gauguin/
Click to expand...
Click to collapse
Thank you for the reply, i have succesfully downloaded and installed the 12.0.9.0 firmware version on her phone.
So now it says :
MIUI Global 12.0.9.0 (QJSEUXM)
The android security level is now 01-01-2021
I then tried changing region to a lot of different countries, including countries in the African region, and India which i believe is in the asian region, and also a few european, it said "Changing region" multiple times, but no matter what country i tried, it still said "No available updates". This was offcourse with 12.0.9.0.
I feel that the speed with which it says "There is no update" kind of suggests that it might not even check, but i dont know if it does, and just really quickly figures out that there is no updates.
So while she got a marginally newer firmware with a 1 month newer security date, it still refuses to find OTA updates with 12.0.9.0 Android 10 by itself.
I also tried re-running the downloaded 12.0.1.0 Android 11 version i had previously downloaded, but it still fails with the same message as before.
It seems the update routine for this phone is really screwed. It was able to do the manual update to the newer android 10 but it refuses to do anything with the android 11 firmwares.
If anyone has more succes, i would like to hear about it. My teenage daughter is not prepared to do a full factory reset, so unless someone finds a way to do this without having to reset the phone, i think she will just want to keep the phone on the current firmware.
PS. I also tried disconnecting from our wifi, in case our firewall was blocking, but on 5G it still does not find any updates, really fast.
I can report the same as xsatquest.
The update to 12.0.9.0 has worked but thats as far as it goes.
I would quite happily do a factory reset to get to Android 11 as long as it doesn't involve unlocking the boot loader or anything else that invalidates the warranty.
I swapped the regions a few times too, but it didn't make any difference.
I have tried to follow some youtube tutorials on using MiFlash Pro to load the recovery image, just in case.
I tried to flash the first Android 11 version of the ROM from here:
Download Redmi Note 9 Pro 5G / Mi 10i / Mi 10T Lite (gauguin) V12.0.1.0.RJSEUXM MIUI 12 Stable Full Rom | XiaomiROM.com
The Stable update V12.0.1.0.RJSEUXM has been officially released for Redmi Note 9 Pro 5G / Mi 10i / Mi 10T Lite (codename is gauguin). Before …
xiaomirom.com
but the MiFlash tool gave the same error as the phone gives (more or less), Sorry, flash to this stable version is not allowed".
So I tried flashing 12.5.7 from here:
Xiaomi Firmware Updater
The ultimate script that provides firmware packages for Xiaomi devices.
xiaomifirmwareupdater.com
But its exactly the same...
Overandout said:
I can report the same as xsatquest.
The update to 12.0.9.0 has worked but thats as far as it goes.
I would quite happily do a factory reset to get to Android 11 as long as it doesn't involve unlocking the boot loader or anything else that invalidates the warranty.
Click to expand...
Click to collapse
I know that bootloader unlocking could be a PITA, but it does not invalidate the warranty (at least in Europe).
Edit: could any of you capture logcat during failed attempt for ROM installation? This might provide additional info on why exactly is it failing. Also you might give ADB sideload a chance, I don't expect it to really work, but maybe there will be some extra info too.