Related
I got the unlock code for my att note 2 it went through then it says sim not provisioned mm 2. How do I fix it so I can use it on T-Mobile
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Sim not provisioned mm2 means that the sim card tbat is currently in the phone is not activated on any network. Get a new Sim card and activate it OR just activate the one that is in the phone.
So after doing the free unlock trick, all we have to do is pop in a working T-Mo sim for it to work? No tweaking anything or flashing radios?
If you have an ATT device, you will have to load the TMO apn's for the device to work.
Radio image should work, but you may need to try a different image based on your location.
Apn settings are critical....g
allin1der said:
So after doing the free unlock trick, all we have to do is pop in a working T-Mo sim for it to work? No tweaking anything or flashing radios?
Click to expand...
Click to collapse
Yes it will work..all you need is the tmobile modem..which will make the correct apns are enabled properly. ..
Clean rom for example is for multi carriers and you can flash it for att or tmobile. .just for an example. ..make surebyou have a updated good modem for that carrier...clear/cache dalvik cache install modem...reboot should work just fine. Did this on my note 1 and a tmobile guy bought it off me, I had the modem installed prehand and he inserted his sim power it on and bam..worked fine
I have the dual sim version and in the apn settings when ever I try to modify the mnc setting, the whole apn disappears when I try to save it. Anyone successfully able to add a tmobile apn that work in the US?
Hey, I just need someone to point me to the right direction.
I bought my LG G2 off ebay last year, it came flashed to boost mobile. All I need to do is flash it back to sprint and unlock the GSM on the phone.
I just found this forum and don't know where to start in this process..
Im on 5.0.2
Software version LS980ZVI
Model # LS980
Thank you if you can help
this thread has everything you need
http://forum.xda-developers.com/sprint-g2/general/ls980-lollipop-update-root-sim-unlock-t3357837
After you install TWRP successfully but before you unlock the sim card, You can install the latest version ZVI that is already rooted
http://forum.xda-developers.com/sprint-g2/development/rom-ls980-stock-5-0-2-zvi-flashable-t3303163
for unlocking the SIM card I would use this procedure instead
http://forum.xda-developers.com/sprint-g2/general/ls980-lollipop-update-root-sim-unlock-t3357837
Thank you !!
Since you are on ZVI already, you could try the steps in this thread
http://forum.xda-developers.com/sprint-g2/general/how-to-root-zvi-install-twrp-t3410650
tekweezle said:
this thread has everything you need
http://forum.xda-developers.com/sprint-g2/general/ls980-lollipop-update-root-sim-unlock-t3357837
After you install TWRP successfully but before you unlock the sim card, You can install the latest version ZVI that is already rooted
http://forum.xda-developers.com/sprint-g2/development/rom-ls980-stock-5-0-2-zvi-flashable-t3303163
for unlocking the SIM card I would use this procedure instead
http://forum.xda-developers.com/sprint-g2/general/ls980-lollipop-update-root-sim-unlock-t3357837
Click to expand...
Click to collapse
Hey I did all the steps and got it unlocked but I cant to get my simple mobile sim card to work.
When I select the network mode global I have full bars, but when I try gsm/umts all my bars go away.
The phone is reading the sim card, but im not able to make calls/text. I Also get a authentication error when I try to update the prl/profile settings
did you do the twoclick procedure to unlock the sim card?
did you edit your apn? from the dialer, dial ##3282#
i am on freedompop so i changed my apn to freedompop.foggmobile.com. Simple mobile might require it to be mvno.att.net or something like that( i used that for airvoice).
tekweezle said:
did you do the twoclick procedure to unlock the sim card?
did you edit your apn? from the dialer, dial ##3282#
Yep I did the two click method but on both of my sims my phone refuses to connect/ find networks. I get emergency calls only.
I used a freedompop sim too and changed my apn to freedompop.foggmobile.com. but it still wont connect to the network. When I go into the freedompop messenger app it says. I dont have any data.
Click to expand...
Click to collapse
that;s strange. It worked for me as soon as I added my APN. Does your phone see the APN for three.co.uk and 3hotspot when you have the freedompop SIM in there?
I don;t even use the Freedompop Messenger app. i just use the sim for data. i can test the functionality of the sim slot because I have a freedompop CDMA/Sprint sim card along with a GSM one.
there are a couple of other ways to unlock the sim slot-they're all based on the same way so don;t know if anything will be different. there is a simfree.exe and there is a thread by someone named summercat for a 1 click procedure. try one of those
tekweezle said:
that;s strange. It worked for me as soon as I added my APN. Does your phone see the APN for three.co.uk and 3hotspot when you have the freedompop SIM in there?
I don;t even use the Freedompop Messenger app. i just use the sim for data. i can test the functionality of the sim slot because I have a freedompop CDMA/Sprint sim card along with a GSM one.
there are a couple of other ways to unlock the sim slot-they're all based on the same way so don;t know if anything will be different. there is a simfree.exe and there is a thread by someone named summercat for a 1 click procedure. try one of those
Click to expand...
Click to collapse
yep thats the first apn I see "three.co.uk"
im gonna tot back to zv8 and try this one more time or im just gonna go with ring plus or ting.
But thanks for all the help.
And you used ##3282# to add the new apn, correct?
I would go down to zve, then do the Ota update from sprint to zvg or zvh, then do the unlock and root and sim unlock. It's worked fine for me on zvh and zvi.
Sent from my LG-LS980 using Tapatalk
tekweezle said:
And you used ##3282# to add the new apn, correct?
I would go down to zve, then do the Ota update from sprint to zvg or zvh, then do the unlock and root and sim unlock. It's worked fine for me on zvh and zvi.
Sent from my LG-LS980 using Tapatalk
Click to expand...
Click to collapse
Yep, I enabled the lte/cdma, rebooted, then enabled gsm, rebooted and I got it to say freedompop on the lockscreen but after a couple of min. It went back to searching for networks.
im gonna try zve to zvg with the two click method
Good luck. The way you know it is supposed to be correctly installed is that your boot animation changes for the yellow sprint spark animation to some swirly wavy rainbow. The carrier image gets swapped to a gsm version.
Sent from my LG-LS980 using Tapatalk
Need some help here .
I flash unlock g955u1 firmware successfully and it running great .but I decided revert back to tmobile stock run unlock app to unlock my sim network .it also went through. But when insert metro pcs sim card I could not get data working .Also if I factory reset my phone and run unlock app again it said my is locked
Any help please
With a Metro Sim, you need to call Metro to switch it over. It's not automatic with them.
EDIT: ALso, you need to change the APN settings for Metro to get data
tube517 said:
With a Metro Sim, you need to call Metro to switch it over. It's not automatic with them.
EDIT: ALso, you need to change the APN settings for Metro to get data
Click to expand...
Click to collapse
I have 2 s8+,the other one I just unlock it out of box insert metro pcs sim card it works
yijinsa said:
I have 2 s8+,the other one I just unlock it out of box insert metro pcs sim card it works
Click to expand...
Click to collapse
You're lucky. Anytime you switch sims or put a new sim in a phone, you have to call MetroPCS. I've never been able to just put a sim in an unlocked phone or even a different METRO phone and have it work immediately. I have always had to call.
I have a att note 10+ that I sim unlocked it will take a Verizon sim and work 100% but it will not work with straight talk i have no service can't call text and no data every once in awhile a text will get thru but can anyone help me with this I can't root because I can't oem unlock unless there is another way any help would be appreciated
ackaite said:
I have a att note 10+ that I sim unlocked it will take a Verizon sim and work 100% but it will not work with straight talk i have no service can't call text and no data every once in awhile a text will get thru but can anyone help me with this I can't root because I can't oem unlock unless there is another way any help would be appreciated
Click to expand...
Click to collapse
Did you set the APN information correctly?
Also are you using the N975U1 firmware or the standard AT&T firmware?
Are you using the BYOD sim card from straight talk?
What have you done over the phone with Straight Talk as far as troubleshooting? - this one can be important. If the phone isn't working with straight talk only it maybe a configuration (apn setting) or provisioning issue.
Are you sure the device is compatible with the area or region your in?
What provider/tower (Verizon, AT&T, etc.) does straight talk have you going through?
More information on what you have done to setup the phone for straight talk, troubleshooting steps you have taken, what information straight talk may have provided (etc. etc.) will help others be able to help you. Providing little or no details makes it rather hard to offer any help.
The apn won't let me put dun in the type I sim unlocked it with a puk code and got strighttalk byop I tried flashing the U1 firmware to it wouldn't take it so I did a Verizon firmware thinking that might help and same thing with the striaght talk it doesn't wanna work i put a Verizon sim in it and it works just like it did on ATT so I'm confused as to why the straight talk sim won't work they can't figure it out on their end either
I factory reset the phone reset network settings did just about everything I could with the phone besides it being funny about the apn cuz it says apn cannot be changed on this device if you put dun in the apn type i dunno the only thing I notice is when the Verizon sim card is in the phone the network mode is set to global whereas with the striaght talk its LTE/CDMA and it won't let you change it to global
ackaite said:
The apn won't let me put dun in the type I sim unlocked it with a puk code and got strighttalk byop I tried flashing the U1 firmware to it wouldn't take it so I did a Verizon firmware thinking that might help and same thing with the striaght talk it doesn't wanna work i put a Verizon sim in it and it works just like it did on ATT so I'm confused as to why the straight talk sim won't work they can't figure it out on their end either
Click to expand...
Click to collapse
Straight Talk uses different mobile providers to offer service different areas.. They utilize Verizon, AT&T, Sprint and T-Mobile (Sprint and T-Mobile have merged recently, but Sprint towers are still active).
I have seen posts across the internet that indicate you should be using the U1 firmware on the phone.. I would make sure your converting the phone to the U1 firmware properly.
If I recall correctly (this is how I did it previously) when flashing the U1 firmware make sure your doing it without the sim card installed and using the non home_csc file. Factory data reset the phone after you successfully flash the U1 firmware and then insert the sim card after setting the phone back up (so it can apply the new sim/network settings).
I would strongly suggest you do not restore a backup during initial setup when you do this. If you restore a backup it may restore previous network settings/configurations that were for what you had previously.
If flashing U1 firmware doesn't help (and since this this is a Straight Talk specific issue) then it's more then likely on the end of Straight Talk. I would call them and make sure that your sim card is the correct one for the cell towers they have you going through and the phone you have. Using an incompatible sim card (or one that is faulty) can cause issues like this. You can also have them send you another sim card to try.
Also contact them to make sure the service is properly provisioned and activated on your phone. Double check the APN with them, and see if they have an alternative one to try. It is also possible that a service outage maybe (or issue with Straight Talk internally) in your area, so I would call them to make sure that neither are not the case here.
ackaite said:
I factory reset the phone reset network settings did just about everything I could with the phone besides it being funny about the apn cuz it says apn cannot be changed on this device if you put dun in the apn type i dunno the only thing I notice is when the Verizon sim card is in the phone the network mode is set to global whereas with the striaght talk its LTE/CDMA and it won't let you change it to global
Click to expand...
Click to collapse
The Global setting doesn't really matter in this case and your phone will be set to use the towers that Straight Talk has you going through.
The only thing that I can think of that would be a problem with network mode is if your sim card from straight talk is meant for a different provider then the towers they use in your area (i.e. sim card is for AT&T but the provider they have for the area is Sprint).
the straight Talk sim works in other phones no problem a s8 and a older note im thinking att has something in the software to block other apns i dunno i unlocked it with a PUK code and flashed verizon firmware on it thinking i could get passed it but the verizon sim works 100% and the att sim works 100% too but a straighttalk sim card (verizon) towers the phone tries it shows 4g and disappears and then it shows it has service but cant call it just says emergency calls only
ackaite said:
the straight Talk sim works in other phones no problem a s8 and a older note
Click to expand...
Click to collapse
I would not use older phones as a means to say the sim card is good. Besides that's irrelevant to what is going on with the Note 10+
ackaite said:
im thinking att has something in the software to block other apns
Click to expand...
Click to collapse
Then this means one of two things... Either you didn't get the phone unlocked or else you did not convert to another carrier (or the U1 firmware XAA region) correctly.
If your using the unlocked firmware (U1 XAA region) then you should be able to edit the APN. If not then you should be able to create one.
ackaite said:
i dunno i unlocked it with a PUK code and flashed verizon firmware on it thinking i could get passed it but the verizon sim works 100% and the att sim works 100% too but a straighttalk sim card (verizon) towers the phone tries it shows 4g and disappears and then it shows it has service but cant call it just says emergency calls only
Click to expand...
Click to collapse
That sounds like either the sim card isn't good, the phone was not activated/provisioned properly in there systems (call them and double check IMEI and model information), the phone is not compatible with the service they offer in your area (I suggest using the XAA region U1 firmware in this case) or else your phone is not fully unlocked.
I would also suggest google searching or else asking them for any updated or alternative APN's to try. It maybe very likely the one you have is not suitable for the phone/area... It wouldn't be the first time I have had an issue similar to this like this.
I am opt to believe the first 3 are the most likely scenarios since the phone works on Verzion with the sim card per your indication.
Yeah and the only reason I tried the older phone is to see if the sim card is activate with the number and the phone itself pulled the apn from network when I tried to flash to U1 the phone gave me a error but it took the Verizon firmware for the 975U but its still not working do you know of a good link for the firmware your talking about so I can try that
ackaite said:
Yeah and the only reason I tried the older phone is to see if the sim card is activate with the number and the phone itself pulled the apn from network
Click to expand...
Click to collapse
From personal experience I would advise in the future you don't do that. When you activate the phone you should activate the one you are using and definitely do not use an older phone to activate a newer phone. I have had many problems with this in the past as provisioning for an older phone didn't always work for my newer ones..
ackaite said:
when I tried to flash to U1 the phone gave me a error but it took the Verizon firmware for the 975U but its still not working do you know of a good link for the firmware your talking about so I can try that
Click to expand...
Click to collapse
I waited for you to give more information on the issue, but you didn't. So I am sorry, but if you don't provide the details of what is going on it makes helping you very difficult. You didn't say what error you are getting, what the firmware version(s) are of what your trying to flash and what is currently on the phone.
Here's the last piece of help I can offer now.
I can tell you that the following can be found on the forum by searching:
Links and how to obtain the firmware - Multiple threads asking the same question exist here. Also Frija, SamFirm, SamMobile are just a few examples of what can be found referenced here.
Bootloader version(s) - what will happen when you try to downgrade and what will happen (along with a important thing) when you upgrade.
Websites to find firmware - SamMobile and some others have been mentioned.
Patched Odin - In case you need the latest version it has been mentioned here already.
I can also tell you that by using Google and searching for SM-975U1 XAA on Sammobile does in fact work.
Brother give me root file for note 10 plus SM-N975U android 10 version one Ul version 2.5 plz help me