Related
All,
Due to good success in the Blue Angel section, I have decided to open a Questions and Answers thread on this section of the forum as well. This will be good to keep the number of new threads with questions down to a minimum, which will make new threads essentially for people that are contributing to the Vogue in any way. This includes but is not limited to people that are providing
*New Roms and Kitchens
*Programs and Apps
*Fixes
*Skins
*Tips and Tricks
However, I have a life (and so do most of you), which is why I would like to request the help from other Seniors (or anyone who knows the answer really ) to monitor the thread as well. This will have the added side effect of creating an ever self updating knowledge base that will far extend the content of the Wiki. This will in turn save us from having to answer the same question 37000 times...
Without further ado, lets go for it!
egzthunder1 said:
All,
Due to good success in the Blue Angel section, I have decided to open a Questions and Answers thread on this section of the forum as well. This will be good to keep the number of new threads with questions down to a minimum, which will make new threads essentially for people that are contributing to the Vogue in any way. This includes but is not limited to people that are providing
*New Roms and Kitchens
*Programs and Apps
*Fixes
*Skins
*Tips and Tricks
However, I have a life (and so do most of you), which is why I would like to request the help from other Seniors (or anyone who knows the answer really ) to monitor the thread as well. This will have the added side effect of creating an ever self updating knowledge base that will far extend the content of the Wiki. This will in turn save us from having to answer the same question 37000 times...
Without further ado, lets go for it!
Click to expand...
Click to collapse
GOOD IDEA!
Hi there Gents any input
Barogi awesome so far for v2; media player not staying in full screen mode though, and manila home weather under clock wont update when you push update now also getting error message for manila home on reboot
Great idea for a faq page!
I have been using a NFSfan rom on my bell vogue for a while, and it crapped out today for some reason. Rather than put another WM build on it, I wanted to change to Android.
I have looked through many pages in here, but I can't find a simple tutorial on switch from a custom WM build to a Android build. I prefer to use the NAND method so that I don't ever have to see WM again...
Can someone create or point me towards a step-by-step guide for installing Android? Keep in mind that I have absolutely no Android experience, and that my custom ROM is completely messed up, so would it make for sense to flash the a manf build and upgrade from there?
Thanks
devildog0729 said:
Barogi awesome so far for v2; media player not staying in full screen mode though, and manila home weather under clock wont update when you push update now also getting error message for manila home on reboot
Click to expand...
Click to collapse
Did you install the CDMA home weather fix?
joshmxpx said:
Great idea for a faq page!
I have been using a NFSfan rom on my bell vogue for a while, and it crapped out today for some reason. Rather than put another WM build on it, I wanted to change to Android.
I have looked through many pages in here, but I can't find a simple tutorial on switch from a custom WM build to a Android build. I prefer to use the NAND method so that I don't ever have to see WM again...
Can someone create or point me towards a step-by-step guide for installing Android? Keep in mind that I have absolutely no Android experience, and that my custom ROM is completely messed up, so would it make for sense to flash the a manf build and upgrade from there?
Thanks
Click to expand...
Click to collapse
Here you go
http://forum.xda-developers.com/showthread.php?t=628353
Good luck!
devildog0729 said:
Barogi awesome so far for v2; media player not staying in full screen mode though, and manila home weather under clock wont update when you push update now also getting error message for manila home on reboot
Click to expand...
Click to collapse
As far as WMP, Barogi will have to look into it since it is his rom.
One last thing, please do not double post. Thanks for understanding...
I have a question:
I recently flashed the Bell rom with the latest radio (I couldn't get the radio only nbh to apply properly), and then subsequently flashed with the latest NagROM rom (which is awesome btw).
Now of course, at startup i have the nice HTC screen with the rom version etc, followed by an AWFUL blue BELL screen (and then the nice orange wm6.5 screen).
Is it possible to change the blue BELL screen? And if so how?
AaronNZ said:
I have a question:
I recently flashed the Bell rom with the latest radio (I couldn't get the radio only nbh to apply properly), and then subsequently flashed with the latest NagROM rom (which is awesome btw).
Now of course, at startup i have the nice HTC screen with the rom version etc, followed by an AWFUL blue BELL screen (and then the nice orange wm6.5 screen).
Is it possible to change the blue BELL screen? And if so how?
Click to expand...
Click to collapse
There was a cab to change that somewhere around here in this section of the forum. Alternatively, you can flash NFSFan's rom (which will get rid of it), or you can try mine as well and then reflash Nag's rom.
Edit: Here you go
http://rapidshare.com/files/333401458/BlueBell_Screen_Removal_Rom.rar.html
Question from motoyola
motoyola said:
Help guys, I have a Sprint vogue that was flashed before. It was CID unlocked and has custom ROM on it. My cousin was the one using it then he returned it to me at this state. Problem is the phone does not have any radio. So i tried to bootload it and flash it with a radio but it does not accept it . It's now CID locked.
VOGU100 MFG
SPL-2.01.1000
CPLD-3
I tried to flash it with an OEM ROM, Sprint, USC, Alltel, telus, Bell, VZW nothing seems to work. is there any way to ICD unlock this? so i could flash it with an OEM rom. Thanks.
Click to expand...
Click to collapse
Look in my signature. There is a guide for unlocking as well as superCID unlock the device. Let me know if you need help.
egzthunder1 said:
There was a cab to change that somewhere around here in this section of the forum. Alternatively, you can flash NFSFan's rom (which will get rid of it), or you can try mine as well and then reflash Nag's rom.
Edit: Here you go
http://rapidshare.com/files/333401458/BlueBell_Screen_Removal_Rom.rar.html
Click to expand...
Click to collapse
Thanks, that link is broken, but I found it here (along with some other handy things)
http://www.webcoast.net/temp/
i just flash my vogue with the latest NFSFAN rom. can someone tell me the setting to get my gps to work? whenever i start googlemap it keeps on trying to connect through the data connection. (i did do that one step that NFSFAN asked for the gps dL that verizon cab)
Question from mac+htc
mac+htc said:
Hey everyone,
So I was running NSFANS 6.5 ROM on my device (Amazing ROM btw) But I needed to revert back to the stock rom. I used the VZW updater to go back to the stock rom and I changed the esn on line. When I dialed the *228 and choose option 1 I got a failed message. So I called customer support and he walked me through a manual programing. Well that got voice working but when I went to use the data it wouldn't work. I made sure all the network settings were right, and I still couldn't connect. Well then I hard reset the device and now I am back to square 1. No voice no data. Is this something from NSFANS rom that is messing the phone up? I don't want to call again because their tech support takes forever and I am afraid they are just going to tell me to take the phone into the store. Thanks in advance!
Click to expand...
Click to collapse
Why did you change the E$N? Where you using the device in a different carrier?
Back to your problem. Your EPST settings should survive a hard reset as those are parameters that are not stored in Windows (afaik). It really makes not difference which rom you are using (at least for Voice and SMS).
Lets focus on your main phone's capabilities first. If your EPST settings truly got lost, you will need to get them from Verizon again. The main ones are the MSD and MIN. Make sure that you write them down this time as you will need them again if they go bye bye.
As for your internet, you will probably need to set the correct username in the phone's programming as well (also info that you will need from Verizon, but it should be something like [email protected] or something like that)
Do that and let me know if this works. They will have to program this for you this time, but once you have the values that I mentioned before, you will be able to do it yourself.
Question from pasdabeer
pasdabeer said:
I have android 2.1 currently on my vx6900, Id like to go back to close to stock Rom, but without all the verizon carrier "flavorings" and rescrictions.
Any ideas? Personaly I liked the simple clean useage of win 6.0 without all the extra graphics ( besides the HTC home plug in and the touch flo )
thanks in advance.
Click to expand...
Click to collapse
Try to get Barogi's latest "lite" rom. Also, you can't go wrong with vin's 28014 or NFSFan's rom. I would recommend mine, but I think they might be a little heavy for what you want. Good luck.
i checked out NSFSfan. It was nice, but waaaaaaaaaaaaaaay to much for what I want. Ill check out the other you suggested before i just flash back to stock rom
pasdabeer said:
i checked out NSFSfan. It was nice, but waaaaaaaaaaaaaaay to much for what I want. Ill check out the other you suggested before i just flash back to stock rom
Click to expand...
Click to collapse
Try to avoid stock if you can... it has a bad tendency of being too heavy on the extra apps.
I checked out just SS's of both. Both look awesome, but theres something about the simple look ( or im just used to it since my 8125 ) of the stock look. I would like to have the look but the added memory of a cooked rom.
With NSFSfans, could you remove the today screen plug ins to get back to a more stock look?
Im runnin 2.1 android eclair at the moment, and im barley pulling a full day battery with no data/bluetooth. With the old winmo, I was getting 2.5 days-3days. Thats another main concern for me.
figures, I like the way your rom looks the best! to bad hotfile lost the file : (
There is a temporary problem with accessing this file. Our technical team is resolving the problem right now.
HOTFILE.COM - Free one-click file hosting!
With us you can share big files easily and securely:
Just choose a file, click the "Upload" button and send the download link to your friends and anyone you know.
pasdabeer said:
figures, I like the way your rom looks the best! to bad hotfile lost the file : (
There is a temporary problem with accessing this file. Our technical team is resolving the problem right now.
HOTFILE.COM - Free one-click file hosting!
With us you can share big files easily and securely:
Just choose a file, click the "Upload" button and send the download link to your friends and anyone you know.
Click to expand...
Click to collapse
Which one are you looking for?
egzthunder1 said:
...As for your internet, you will probably need to set the correct username in the phone's programming as well (also info that you will need from Verizon, but it should be something like [email protected] or something like that)...
Click to expand...
Click to collapse
Verizon is [email protected]
JRDNEM_U3_3.4.2_145-012
RSD Lite File Properties:
Code:
Filename: JRDNEM_U3_3.4.2_145-012_BLUR_SIGN_SIGNED_USAJRDNEMARAB1B5TEL03B.0R_PDS03C_USAJRDNFRYOTELSTRA_P013_A007_M003_HWp3_Service1FF.sbf
Creation Date: 03/23/2011 02:55:46
File size: 378300802
RAM DL Version: v0x001000
Bootloader Version: -------------
Platform: 4G OMAP
HAB Type: Signed Production
Official Froyo 2.2 (2.2.2) SBF for Telstra Australia.
Contains BLUR and other useless Telstra Apps.
Useful to restore if you need to do a warranty repair & you have previously upgraded to a 2.2 ROM using Full SBF (Otherwise downgrading to the 2.1 Official SBF might be difficult).
MD5 hash: 80814f03007db1a8bf97483c0529a6f4
New Download Link 22/4/12: http://sbf.droid-developers.org/umt...TELSTRA_P013_A007_M003_HWp3_Service1FF.sbf.gz
from: http://sbf.droid-developers.org/umts_jordan/list.php via. http://and-developers.com/sbf:defy
PS: The download mirror doesn't seem very reliable, going up and down. If you can't connect, just keep trying for 10-15 minutes and please mirror it!
Thanks mate! Greatly appreciated. Time to get my phone sent off for blue-tick upgrade and wanted to flash stock ROM just in case.
What's the blue tick upgrade do?
senergy said:
What's the blue tick upgrade do?
Click to expand...
Click to collapse
Telstra Moto Defy's were originally marketed as Blue Tick compliant handsets which means Telstra's testing has shown that they offer superior coverage in rural areas. Basically, between the time Telstra did this testing and graded the phone as blue tick, and the time the phone actually went on sale, Moto changed the hardware spec of the phone slightly. This hardware change resulted in the Defy falling just below Blue Tick standards. Telstra was initially unaware of the hardware change and continued to market Defy as a blue tick handset. Telstra then discovered the issue and basically offered customers who had purchased a Defy up to that time to send their phone back to Motorola to have their hardware changed back to that original spec that was blue tick complaint.
So the Blue Tick upgrade improves the coverage of the Defy slightly.
Clear as mud?
lobie81 said:
Telstra Moto Defy's were originally marketed as Blue Tick compliant handsets which means Telstra's testing has shown that they offer superior coverage in rural areas. Basically, between the time Telstra did this testing and graded the phone as blue tick, and the time the phone actually went on sale, Moto changed the hardware spec of the phone slightly. This hardware change resulted in the Defy falling just below Blue Tick standards. Telstra was initially unaware of the hardware change and continued to market Defy as a blue tick handset. Telstra then discovered the issue and basically offered customers who had purchased a Defy up to that time to send their phone back to Motorola to have their hardware changed back to that original spec that was blue tick complaint.
So the Blue Tick upgrade improves the coverage of the Defy slightly.
Clear as mud?
Click to expand...
Click to collapse
Yes, correct.
In addition to this I want to add that I spoke to Motorola to get my Blue Tick upgrade, the rep told me that there is a misconception that the Blue Tick issue can be corrected with the 2.2 update, which is NOT true, as it is a Hardware issue.
He also told me that the hardware component that needs replacing to fix this issue, is also the same component responsible for the Speaker issue (which could potentially affect all Defy's sooner or later if does not have the hardware fix). So by getting the Blue Tick upgrade you are killing two birds with one stone to get better reception and prevent the Speaker issue.
Will this work on the Telstra Atrix?
I returned my defy because of severe screen locking and other strange behavior (worse after blue tick upgrade and froyo update) but the reception on the blue tick atrix is consistently 10 to 20dBm worse than the defy was....any one else had that?
thanks mate will come in handy. do you know if its possible to downgrade from 2.3.4 to this rom? cheers
should be included here:
http://and-developers.com/sbf:defy
i only saw australia optus 2.2.2 but not telstra
Nicholox said:
Will this work on the Telstra Atrix?
Click to expand...
Click to collapse
No
tom11 said:
thanks mate will come in handy. do you know if its possible to downgrade from 2.3.4 to this rom? cheers
Click to expand...
Click to collapse
It you flashed using a full SBF rather than a Fixed SBF+nandroid, then I don't think that it is not possible to go fully back to stock at the moment. You will need to wait until Telstra have an official 2.3.4 ROM for the Defy (if ever) or the Bootloader is unlocked.
jh20 said:
should be included here:
http://and-developers.com/sbf:defy
i only saw australia optus 2.2.2 but not telstra
Click to expand...
Click to collapse
I can't find any contact details to get this list updated.
I will be able to downgrade?
Hi! I have my Defy with the original ROM that comes with it (34.4.709.MB525.Movistar.en.01 - 3.4.2-107_JDNL-9) and it come with Froyo 2.2.1, I have made a Nandroid backup, and now, I want to flash my phone with this Froyo 2.2.2 ROM, but I have read that if I install non-fixed ROM's (like this one) I DON'T WILL BE ABLE TO DOWNGRADE AGAIN.
So, my question is: If I flash my Defy with this ROM (Froyo 2.2.2), I'll be able to downgrade to Froyo 2.2.1 without troubles? (for warranty purposes).
Thank you so much for reply!
And sorry if I have grammatical errors, my native language is Spanish. Bye!
Any chance someone could repost this somewhere? I have a Telstra phone, but did a one-way upgrade to T-Mob Froyo, and now can't get it to upgrade to the official Telstra Froyo. 'twould be most helpful.
Cheers.
Replacement link?
Hi Guys,
The multiupload link is dead, does anyone have a copy of the sbf or an alternative download link?
Cheers
I'm looking for this sbf also. Can anybody post an updated link?
Cheers.
snslogic said:
I'm looking for this sbf also. Can anybody post an updated link?
Cheers.
Click to expand...
Click to collapse
if anyone can tell me a fast site to upload i will. i tried mediafire but it's going to take ages (>1hr) so i gave up.......
mediafire is a little faster today. so here it is:
http://www.mediafire.com/?4v7vowbv2vn3olu
Thanks mate. Really appreciate it.
Thanks !! for the ROM!
Sorry guys, I didn't realise that the link went dead. If it happens again (since all the file sharing sites are dropping off since MU went down) send me a PM and I will reupload.
I have been informed that the repost is dead too. Can anyone suggest a host for XDA ROMs since all the Megaupload-like sites are dropping out? If I made a torrent, I don't have a machine running 24/7 that can seed it out.
If anyone needs it urgently before I new host becomes clear send me a PM and I will find a way to send it to you. Same applies if you are willing to host it.
The Land of Smeg said:
Can anyone suggest a host for XDA ROMs since all the Megaupload-like sites are dropping out?
Click to expand...
Click to collapse
I recommend Dropbox. You get 2 GB for signing up. If you sign up through the link in my sig, you'll get 2.25 and then there are some tweeks to extend it more.
P.S. I can host it too, as my Dropbox is 28GB
Hi,
After i brick my flipout i was unable to find the proper flash file for AT&T and all other flashes are failed to work, and most of the download links here and on other sites are expired ,so after 3 days of heavy searching , and after tons of trials i was able to find RUTH_U3_00.28.4 AT&T US version , so if you have bricked flipout AT&T you can make it run again
the full name is
RUTH_U3_00.28.4_SIGNATT_USARUTH25ATTND0NA04D.0R_PDS001_RUTHEATT_P044_HWp3_1FF.sbf
system version
blur_version.1.28.4.MB511.ATT.en.US
firmware
2.1-updare1
baseband
EPU93_U_02.2B.00
kernel
2.6.29-omap1
build
RUTH_U3_00.28.4
i uploaded it on Rapidshare, if you want me to upload it to other sites please let me know.
https://rapidshare.com/files/2594268399/1.zip
thanks.is it locked?
my phone is unlocked , and i flashed this file and still unlocked
Mirror if needed : http://www.4shared.com/get/MoXU1ZsR...sionid=EA7253DEFB5AF77699059D791B05325C.dc322
found this if use to any1 http://sbf.droid-developers.org/umts_ruth/list.php
thank you very much
i've been looking for it over nights.
My Motorola Flipout (international and unlocked) need a recover. Can I use this image?
The last time I attempt to change the system, the device didn't wipe correctly: I flashed a non-blur rom, but a lot of blur files remained. This one is a blur rom, right?
Thanks!
Its never "deblured" your build.prop or default.prop has a few lines saying Motoblur=false so you don't have to sign up with motorola. Thats basically what they mran by deblur
DEV Device: MB511 (deodexed)
Current System: MT27i xICS
Long Live: V9 Ferrari Rom
code.google.com/p/motorola-flipout-files
does it works in motorola charm mb502?
A million thanks to mohammedalmusimie for this, although the link is no longer working, and so another million thanks to Semseddin for the link. You guys just saved me. Yes it's already 2016 and I am still using this phone. Thanks!
Rapidshare - die, who have this ROM ???
antyhero said:
Rapidshare - die, who have this ROM ???
Click to expand...
Click to collapse
i have it , i will try to upload it, and i will share the link with you
Yesterday I bricked my brand new P8000(B) - the new version with Marshmallow 'out of the box' (and the new SIM slots etc...)
I tryed to reflash several stock- and custom ROM's but they don't work because they are made for the 'old' version and there must be major differences in the hardware. At the moment the main problem is that the LCD driver is wrong and the display shows only lines and blurry spots
The Phone was running on ROM "P8000_6.0_20160516" - this ROM is not available at needrom or bbs.elephone.hk even Google doesnt know
It would help a lot if some could supply the ROM "P8000_6.0_20160516" - thank you!
FrauHofrat said:
Yesterday I bricked my brand new P8000(B) - the new version with Marshmallow 'out of the box' (and the new SIM slots etc...)
I tryed to reflash several stock- and custom ROM's but they don't work because they are made for the 'old' version and there must be major differences in the hardware. At the moment the main problem is that the LCD driver is wrong and the display shows only lines and blurry spots
The Phone was running on ROM "P8000_6.0_20160516" - this ROM is not available at needrom or bbs.elephone.hk even Google doesnt know
It would help a lot if some could supply the ROM "P8000_6.0_20160516" - thank you!
Click to expand...
Click to collapse
I can do nothing else than blaming you, I wrote a reply yesterday to the eragon forum that there's someone else who flashed -not even a custom rom- just the root .zip that was for the "old" p8000 and got his phone bricked the same way as you (LCD driver problem). That's why I asked for a dump/backup. It could have been useful for you too (as in this case) and for the other guy too. But nevermind, I hope that you learn from this for later things... anyways, the other guy has contacted elephone on their facebook, so I hope you'll get the rom so you can use your device again. Good luck!
I have this version too, just got it today.
If someone can explain to me how to create the scatter file and the backup, I'll do it.
I have some experience with this stuff, but MTKDroidTools tells me unknown rom structure.
Any help?
I do have the same problem (see here: http://forum.xda-developers.com/elephone-p8000/general/rom-p8000-t3431571 ). I just wanted to root the phone because I liked to change the wifi modem file but i didn't even realize that I got another version of the phone at this point, so I bricked it.
I also contacted the support via facebook, but the support guy had to ask the engineers for help.
But maybe someone can help Emileh taking a dump of his phone, that would be really great!
@ardrift
you are sooo right but I have'n expected that two phones of the same type contain conplete different hardware respectively the firmware is not supporting both hardware versions. Even the manufacturer does not metion to check the hardware version before flashing...
@Emileh @flo1k
I do have a second 'untouched' P8000(B) too - and I'm starving to copy the firmware from this working phone to the faulty phone if someone could explain how...
problem solved
flo1k managed to get a stock ROM for this hardware version - the softwarepackage is named K06TE-A.A.vR14.E1.160707 and should be available at the elephone forum soon....
Further information you can get here http://forum.xda-developers.com/elephone-p8000/general/2016-version-fingerprint-scanner-t3436270
Hi All
I wonder if i can get English Firmware for unbranded
details
cm84 v2.3
FX
3.10.54+ [email protected] #29
LRX21M dev-keys
ALPS.L0.MP2.V1.9_FX_V1.8.2
I Flash it with wrong firmware and logo keep restarting
hope to find solution
thanks
I see on w3bsit3 forums there is a discussion about that device, I hope you can recovery it!! (I beleive thay have the Firmware) also you should check 4pda forums (this one is on Russian)
hardy272 said:
I see on w3bsit3 forums there is a discussion about that device, I hope you can recovery it!! (I beleive thay have the Firmware) also you should check 4pda forums (this one is on Russian)
Click to expand...
Click to collapse
thank you for reply
i already checked this tow site before its not like my device
did you fix it?
Essaam said:
Hi All
I wonder if i can get English Firmware for unbranded
details
cm84 v2.3
FX
3.10.54+ [email protected] #29
LRX21M dev-keys
ALPS.L0.MP2.V1.9_FX_V1.8.2
I Flash it with wrong firmware and logo keep restarting
hope to find solution
thanks
Click to expand...
Click to collapse
did you fix it?
You must install the firmware from the mirror version (The mirror and the tablet like version have exactly the same internals) so the hardware is the same CM84, therein a 1.90 beta version that would work great, it has some better quality of life enhancements! on that thread I asked in Russian if I can flash that mirror firmware on my tablet like device, I flashed it and everything was ok! In case anyone is searching info, here is the thread from 4pda:
https://4pda.ru/forum/index.php?showtopic=792739
If you manage to make an account (there are tutorials on web how to solve 4pda Russian captcha to register) you will se a download link from a custom rom named CATS IV you can safely flash.
Hi Hardy, mind to share with me the firmware you used to flash your device? i bought this car cam from china and it does not come with google playstore and cannot install apk apps... hope you can assist me for the firmware. Thanks in advance.
Here do you have the download link from the latest CM84 firmware:
https://disk.yandex.ru/d/qhbWzQD43Q94GN
hey got a similar DVR android mirror. Was wondering if you could send CATs IV firmware? I don't see it on that website?
Hi, i have the same device, my son played with it and locked it by pin. Can't find a way to factory reset it.
If i enter recovery mode i get a android photo and can't go further.
Any help to reset the device?
I recovery mode I can't pass the image with broken android.