Related
hello guyz please help I am install bnd L34 firmware ton my bnd-Al10 from firmware finder app and it successfully installed but I am rebooting my phone its boot on erecovery mode and my frp is locked and the bootloader unlock site is down what can I do ,?
[email protected] said:
hello guyz please help I am install bnd L34 firmware ton my bnd-Al10 from firmware finder app and it successfully installed but I am rebooting my phone its boot on erecovery mode and my frp is locked and the bootloader unlock site is down what can I do ,
Click to expand...
Click to collapse
bootloader unlock code different from frp unlock code.
installing other device firmware has chance to replace oeminfo.img partition. Changing this partitin often causes locked frp.
If lucky you can wipe from the erecovery that is loading. maybe even couple times. Then maybe it will boot. Other that that there has been no public mention of any fix.
do your best to fix it using hisuite or other methods if you can. if you have twrp that can help if you have stock recovery and locked frp your only hope might be hisuite and if that fails you will need a paid option like dc-phoenix or funkyhuewei. i only have experience with dc-phoenix, and it did fix my locked frp completely bricked phone, but i read that funky also works well but is nearly 3 times as expensive. (15€ vs 50€)
[email protected] said:
hello guyz please help I am install bnd L34 firmware ton my bnd-Al10 from firmware finder app and it successfully installed but I am rebooting my phone its boot on erecovery mode and my frp is locked and the bootloader unlock site is down what can I do ,?
Click to expand...
Click to collapse
Hello friend i had done the same i installed L21 firmware from firmwarefinder to my BND-AL10 and same happened my phone was bricked it was directly taking me to the stock recovery but my bootloader was locked and lucky i had Kept my bootloader unlock code with me when the site was up so when i unlocked my bootloader it did factory reset and booted normally and Oreo was installed but the only problem im facing is my build number is still showing the old one which is BND-AL10C675 B161 and i don't have face unlock and ride mode which comes with Oreo i had face unlock with BND-AL10C675 B161 . My frp was unlocked already .
sygladiator said:
Hello friend i had done the same i installed L21 firmware from firmwarefinder to my BND-AL10 and same happened my phone was bricked it was directly taking me to the stock recovery but my bootloader was locked and lucky i had Kept my bootloader unlock code with me when the site was up so when i unlocked my bootloader it did factory reset and booted normally and Oreo was installed but the only problem im facing is my build number is still showing the old one which is BND-AL10C675 B161 and i don't have face unlock and ride mode which comes with Oreo i had face unlock with BND-AL10C675 B161 . My frp was unlocked already .
Click to expand...
Click to collapse
The displayed build number comes from the data part of the update. (Update_*hw_*.zip)
If you reflash again all three files , might be fixed
mrmazak said:
The displayed build number comes from the data part of the update. (Update_*hw_*.zip)
If you reflash again all three files , might be fixed
Click to expand...
Click to collapse
How should i reflash it , can you please provide me the procedure to do so , it would be very helpfull
sygladiator said:
How should i reflash it , can you please provide me the procedure to do so , it would be very helpfull
Click to expand...
Click to collapse
If flashing again is the answer to solve problem. Use my guide here.
You are on Oreo now so use the top portion. "Flash update"
https://forum.xda-developers.com/honor-7x/how-to/guide-honor-7x-flash-oreo-update-t3781649
mrmazak said:
If flashing again is the answer to solve problem. Use my guide here.
You are on Oreo now so use the top portion. "Flash update"
https://forum.xda-developers.com/honor-7x/how-to/guide-honor-7x-flash-oreo-update-t3781649
Click to expand...
Click to collapse
It all goes above my head , what exactly i have to do please elaborate .
sygladiator said:
It all goes above my head , what exactly i have to do please elaborate .
Click to expand...
Click to collapse
I don't want to sound like rude or anything.
But I put it all pretty simple, I thought. Like 4 steps
Download files
Put files on SD card
Install twrp
Install file I shared
If that is over your head, maybe you should not have modify and phone.
mrmazak said:
I don't want to sound like rude or anything.
But I put it all pretty simple, I thought. Like 4 steps
Download files
Put files on SD card
Install twrp
Install file I shared
If that is over your head, maybe you should not have modify and phone.
Click to expand...
Click to collapse
Sorry for silly questions by the way thankyou for your help
There is no other options to install other than installing through twrp???
Will i get OTA updates of my bootloader is unlocked ??
If not then i vl be happy to install RROS 8.1 coz am on oreo that means i have treble support so i can just install it
So far so good
sygladiator said:
Sorry for silly questions by the way thankyou for your help
There is no other options to install other than installing through twrp???
Will i get OTA updates of my bootloader is unlocked ??
If not then i vl be happy to install RROS 8.1 coz am on oreo that means i have treble support so i can just install it
So far so good
Click to expand...
Click to collapse
I know each device has it's own proceedure to, flash and all, and they are similar but different.
So can be confussing
I'm very happy
After spending a lot of time trying to figure out how to install an original firmware using the dload method, I managed to find a guide that explains how to do it and today I will report the main steps:
First of all, we need the Service Firmware of our device. It can be found here http://androidhost.ru/search.html. From this site you have to search ane-l01 (or ane-l21 if your device is dual sim). So download the relevant firmware (p.s. I saw there aren't the latest firmwares, in my case I installed the 8.0.0.149 version, not the 8.0.0.154 ).
Then extract the "Software" folder and copy the "dload" folder (with its contents!) to the external sd card.
Finally, enter to the project menu from dialer typing *#*#2846579#*#* ==> Software Upgrade ==> SdCard Upgrade.
Wait for the installation and before configuring the device enter in Recovery Mode (from the phone off, VOLUME-UP + POWER ON) and make Wipe Cache Partition, Wipe Data/Factory Reset, Reboot System Now.
@Merlin_99, I was looking for this "dload package" for a while, thanks to share.
So, this mean that in the end the of firmware installation the bootloader will be locked.
This is good news for the guys that want lock bootloader instead of relock.
kilroystyx said:
@Merlin_99, I was looking for this "dload package" for a while, thanks to share.
So, this mean that in the end the of firmware installation the bootloader will be locked.
This is good news for the guys that want lock bootloader instead of relock.
Click to expand...
Click to collapse
Yes, when you install the firmware, the bootloader will become locked (and the root will be lost).
does this work with a downgrade aswell?
mute- said:
does this work with a downgrade aswell?
Click to expand...
Click to collapse
Yes, it should works. I downgrade from B156 to B150 without issues.
kilroystyx said:
Yes, it should works. I downgrade from B156 to B150 without issues.
Click to expand...
Click to collapse
Perfect thanks.
Is there any other Page with faster DL speed?
kilroystyx said:
Yes, it should works. I downgrade from B156 to B150 without issues.
Click to expand...
Click to collapse
why did you downgrade if i may ask ? does B156 has any issue ?
myself i'm still stuck on B145 and i'm considering this method to update since i have a locked bootloader
mute- said:
Perfect thanks.
Is there any other Page with faster DL speed?
Click to expand...
Click to collapse
No, at least I don't know, take around 2 hours.
touns_j said:
why did you downgrade if i may ask ? does B156 has any issue ?
myself i'm still stuck on B145 and i'm considering this method to update since i have a locked bootloader
Click to expand...
Click to collapse
No, so far B156 is better even than B160. I got flickering in the B160, so I moved to B156, not perfect but much better.
Now I'm in B150 because is the last firmware available that I can lock (not relock) the bootloader, I'm thinking sell the phone...
kilroystyx said:
No, so far B156 is better even than B160. I got flickering in the B160, so I moved to B156, not perfect but much better.
Now I'm in B150 because is the last firmware available that I can lock (not relock) the bootloader, I'm thinking sell the phone...
Click to expand...
Click to collapse
i understand, thanks for the info about the flickering issue
Thank you very much!
I just downgraded my phone so i could use DC Locker to unlock my phone.
many thanks!
And what about B154 which I'm going to install (file is available on above mentioned site)?
geppone1970 said:
And what about B154 which I'm going to install (file is available on above mentioned site)?
Click to expand...
Click to collapse
make sure you install the update for your particular variant , on the website i see B154 is for the L21 ( the dual sim variant) . i assume your device is from the C432 region and dual sim yes ?
Merlin_99 said:
I'm very happy
After spending a lot of time trying to figure out how to install an original firmware using the dload method, I managed to find a guide that explains how to do it and today I will report the main steps:
First of all, we need the Service Firmware of our device. It can be found here http://androidhost.ru/search.html. From this site you have to search ane-l01 (or ane-l21 if your device is dual sim). So download the relevant firmware (p.s. I saw there aren't the latest firmwares, in my case I installed the 8.0.0.149 version, not the 8.0.0.154 ).
Then extract the "Software" folder and copy the "dload" folder (with its contents!) to the external sd card.
Finally, enter to the project menu from dialer typing *#*#2846579#*#* ==> Software Upgrade ==> SdCard Upgrade.
Wait for the installation and before configuring the device enter in Recovery Mode (from the phone off, VOLUME-UP + POWER ON) and make Wipe Cache Partition, Wipe Data/Factory Reset, Reboot System Now.
Click to expand...
Click to collapse
Good mornin all
Thanks a lot man, I was hoping for a solution for the "lock" state for months and this is just perfect and works! I only have the Build 150 though because it's the last OTA I got on my country just like @kilroystyx so I can get that perfect "lock" state :good: .
This gets us the warranty back which is great, I was afraid of losing it due to the "relock" state, it's strange because Huawei is the only company I know that does this on warranty stuff after a lock of a bootloader...Weird...
Anyway, great job!!!!!!!!!
Thanks again,
AS
touns_j said:
make sure you install the update for your particular variant , on the website i see B154 is for the L21 ( the dual sim variant) . i assume your device is from the C432 region and dual sim yes ?
Click to expand...
Click to collapse
yes, correct!
Now I'm on B154, it seems faster and smoother
I installed yesterday the firmware Huawei P20 Lite ANE-L21 Anne-L21 8.0.0.150 (C432) and now in the settings the build that appears is system 8.0.0.046 (0H27), is it normal?
whats89 said:
I installed yesterday the firmware Huawei P20 Lite ANE-L21 Anne-L21 8.0.0.150 (C432) and now in the settings the build that appears is system 8.0.0.046 (0H27), is it normal?
Click to expand...
Click to collapse
in the dial pad:
*#*#2846579#*#*
3. Network Information Query
4. Vendor Country Info
Vendor: hw
Country: eu
Do you see in your device Vendor & Country as listed above?
kilroystyx said:
in the dial pad:
*#*#2846579#*#*
3. Network Information Query
4. Vendor Country Info
Vendor: hw
Country: eu
Do you see in your device Vendor & Country as listed above?
Click to expand...
Click to collapse
So i check and the info is
Vendor: altice
Country: all
there is any problem?
whats89 said:
So i check and the info is
Vendor: altice
Country: all
there is any problem?
Click to expand...
Click to collapse
You should try install firmware for ANE-LX1C33
kilroystyx said:
You should try install firmware for ANE-LX1C33
Click to expand...
Click to collapse
I can not find the firmware you mentioned and install through sd card and I do not have the bootloader unlock. what can I do?
Thank you for your help
Note: The full kernel sources are available in the link below!?
https://github.com/realme-kernel-opensource/realmeQ_realme5Pro-kernel-source
Read the full disclaimer below, and keep in mind that after unlocking Widevine L1 will be replaced by Widevine L3.
th test may have unforeseeable impacts on your phone.
3. Some functions may not operate properly because of third-party firmware, such as the photo-taking function of the camera. It may also cause device damage.
4. Personal and confidential information on phone may leak, and security may be compromised.
5. In-depth test may modify some of the system functions, and prevent you from updating the system version to enjoy the latest ColorOS.
6. After unlocking Widevine L1 will be replaced by Widevine L3.
Second, read the steps below for the in-depth test
Preparation:
realme 5 Pro - with 60%+ battery
1 x USB Cable
1 x PC / MacBook
Step 1. Make sure you have backed up your data, unlocking your phone will erase all of your data.
Step 2. Make sure your system version is the official and latest one.
Step 3. Download and install the unlock tool apk on your phone.
https://drive.google.com/drive/folders/1kvOPTC-vtS_NfqIGDudK93iSC7QlRbL8?usp=sharing
Install it to apply for the bootloader unlock via the tool.
Step 4. Follow the detailed steps below to unlock the bootloader.
#1. Open unlock tool.
realme
#2. Click “Start applying”.
realme
#3. Please read the disclaimer in detail, select the checkbox, and submit your application.
realme
#4. The application will be checked by our servers.
realme
#5. Within approximately 1 hour, the unlock tool apk will show the status of the unlock request - if it shows the unlocking is successful, please proceed to the following step.
realme
#6. You can now click “Start the in-depth test” and the device will reboot automatically. The following string will display on the screen: fast boot_unlock_verify ok
#7. Download and install the fastboot tool on your PC or MacBook (check this https://www.xda-developers.com/google-releases-separate-adb-and-fastboot-binary-downloads/), use a cable to connect phone and PC. In Fastboot mode use engineering command in the picture below to unlock
- Enter the command: adb reboot bootloader
- Press “Enter”on your keyboard
- Enter the command: fastboot flashing unlock
- Press “Enter”on your keyboard
#8. On your phone press the Volume Up key to select “Unlock” (or press the Volume Down key if you have changed your mind to select “Do not unlock bootloader”).
realme
When you click the Volume Up, you will enter the new interface showed below.
realme
Then enter command "fastboot reboot”. Then phone will reboot and enter the in-depth test mode - all user data on the phone will be erased - we recommend you perform a data backup prior to applying
FAQ
Q1: How to relock the bootloader?
#1. Download the unlock tool again to apply to exit the in-depth test.
realme
#2. Click “Apply to exit in-depth test”. Your phone will reboot automatically, and you will enter the Fastboot mode.
#3. In the Fastboot mode, use the engineering command below on your PC to re-lock the bootloader.
- Enter the command: adb reboot bootloader
- Press “Enter” on your keyboard
- Enter the command: fastboot flashing lock
- Press “Enter” on your keyboard
#4. Press the Volume Up button to select the “Lock bootloader” option (or press the Volume Down button to select “Do not lock bootloader" and keep it unlocked).
realme
Then enter command "fastboot reboot”. The phone will reboot and exit the in-depth test mode. All user data on the phone will be erased - we recommend you perform a data backup prior to applying.
Q2: Are there any risks after unlocking the bootloader?
Please be aware that realme cannot guarantee the full functionality, and will not be responsible, for any third-party unsigned custom ROM being flashed onto your device after the bootloader is unlocked. An unsigned third-party custom ROM may not have gone through the thorough tests that we run for each device and software version that we release.
A third-party custom ROM may not work properly on your device, and certain functions and services may cease to work. The performance and device data may also be affected, and may damage the device permanently. In the worst case, unlocking bootloader will cause physical injuries or material damage for ex. due to device overheating.
Q3: Will it affect future OTAs after unlocking?
Secure user data partition may also become inaccessible and you will not be able to get official software upgrades if you unlock the bootloader. Once re-locked the bootloader, users will receive official OTAs again.
Q4: Will it affect warranty?
Warranty will be fully applied to problems caused by realme 5 Pro unlocking or flashing a custom ROM.
Q5: How to flash back the official ROM after installing a custom ROM?
Users need to go to a service center to flash the device FREE of charge. We are developing a tool to flash stock ColorOS - will come in Q2 2019
Q6: When other devices can get bootloader unlock?
Realme 1 will get bootloader unlock in Feb. Other devices are being considered.
Q7: Where are the kernel sources?
LINK --> https://github.com/realme-kernel-opensource/realmeQ_realme5Pro-kernel-source
I just try, but show "failed to submit application" the current app does not support your system
Good work, expecting some progress with Realme q
The Wolf Dark said:
I just try, but show "failed to submit application" the current app does not support your system
Click to expand...
Click to collapse
Try again... Working now..
The app says it does not support system version and asks me to update. System update app tells me I've already the latest Color Os 6 RMX1971_11_A.06.
I've Realme Q btw. Any ideas?
greenys' said:
The app says it does not support system version and asks me to update. System update app tells me I've already the latest Color Os 6 RMX1971_11_A.06.
I've Realme Q btw. Any ideas?
Click to expand...
Click to collapse
This is my version...
jijoejoe123 said:
This is my version...
Click to expand...
Click to collapse
Try enabling Unlock bootloader option in Developer options, in ur ss its showing Developer options aren't enabled maybe that could be the issue!
jijoejoe123 said:
This is my version...
Click to expand...
Click to collapse
I see but how does that help me? -_-
greenys' said:
The app says it does not support system version and asks me to update. System update app tells me I've already the latest Color Os 6 RMX1971_11_A.06.
I've Realme Q btw. Any ideas?
Click to expand...
Click to collapse
Hi, Here is how to unlock bootloader for realme Q.
1. Download Official firmware ColorOS 6.0 RMX1971_11_A.07 dated 09/25/2019 For realme Q. https://download.c.realme.com/osupdate/RMX1971_11_OTA_0070_all_WjxRJittzizl.ozip
How to update?
Transfer the downloaded firmware to the storage device of your phone, find it in the file manager, click on the firmware, click "Update Now" and wait for the successful update.
2. after updated. Install realme Q deeptest download at http://www.mediafire.com/file/uhhivym8g2ondg0/realmeQ-Deeptest.apk/file
do continue following first page.
Source: https://www.realmebbs.com/post-deta...06252043546624&subForumId=1167334475059703808
https://www.realmebbs.com/post-deta...06252043546624&subForumId=1167334475059703808
My phone is not unlocking it says write to device failed (too many links)
Joji Xavier said:
My phone is not unlocking it says write to device failed (too many links)
Click to expand...
Click to collapse
did you updated to version RMX1971_11_A.07 ? deeptest working only on 07 version.
---------- Post added at 01:53 AM ---------- Previous post was at 01:36 AM ----------
try change computer.
tplsolution said:
Hi, Here is how to unlock bootloader for realme Q.
1. Download Official firmware ColorOS 6.0 RMX1971_11_A.07 dated 09/25/2019 For realme Q. https://download.c.realme.com/osupdate/RMX1971_11_OTA_0070_all_WjxRJittzizl.ozip
How to update?
Transfer the downloaded firmware to the storage device of your phone, find it in the file manager, click on the firmware, click "Update Now" and wait for the successful update.
2. after updated. Install realme Q deeptest download at http://www.mediafire.com/file/uhhivym8g2ondg0/realmeQ-Deeptest.apk/file
do continue following first page.
Source: https://www.realmebbs.com/post-deta...06252043546624&subForumId=1167334475059703808
https://www.realmebbs.com/post-deta...06252043546624&subForumId=1167334475059703808
Click to expand...
Click to collapse
Thanks! This worked. Now how do I enter fastboot mode to flash twrp? I can't seem to do so.
jijoejoe123 said:
This is my version...
Click to expand...
Click to collapse
does the unofficial twrp, lineage os rom and, ofc, the unlocking method all work on all the variants (storage and ram) of rmx1971ex (indian realme 5 pro)?
m0han said:
does the unofficial twrp, lineage os rom and, ofc, the unlocking method all work on all the variants (storage and ram) of rmx1971ex (indian realme 5 pro)?
Click to expand...
Click to collapse
Nope. Doesn't work on Realme Q but you're safe. It does work on on Indian rmx1971ex.
Thanks for the post
---------- Post added at 02:03 PM ---------- Previous post was at 02:01 PM ----------
tplsolution said:
Hi, Here is how to unlock bootloader for realme Q.
1. Download Official firmware ColorOS 6.0 RMX1971_11_A.07 dated 09/25/2019 For realme Q. https://download.c.realme.com/osupdate/RMX1971_11_OTA_0070_all_WjxRJittzizl.ozip
How to update?
Transfer the downloaded firmware to the storage device of your phone, find it in the file manager, click on the firmware, click "Update Now" and wait for the successful update.
2. after updated. Install realme Q deeptest download at http://www.mediafire.com/file/uhhivym8g2ondg0/realmeQ-Deeptest.apk/file
do continue following first page.
Source: https://www.realmebbs.com/post-deta...06252043546624&subForumId=1167334475059703808
https://www.realmebbs.com/post-deta...06252043546624&subForumId=1167334475059703808
Click to expand...
Click to collapse
Any site where you can get these direct download links: https://download.c.realme.com/osupdate/RMX1971_11_OTA_0070_all_WjxRJittzizl.ozip
Im already in A.07 because of these . And i saw that A.08 is already available so i want to check also.
jamez001 said:
Thanks for the postAny site where you can get these direct download links: https://download.c.realme.com/osupdate/RMX1971_11_OTA_0070_all_WjxRJittzizl.ozip
Im already in A.07 because of these . And i saw that A.08 is already available so i want to check also.
Click to expand...
Click to collapse
Use Panda VPN on Google play, change server to China - Shenzhen 2 and update via OTA. There are no download file in this time.
tplsolution said:
Use Panda VPN on Google play, change server to China - Shenzhen 2 and update via OTA. There are no download file in this time.
Click to expand...
Click to collapse
Great!, was able to update to latest A.09 already
Help unbrick
Please help, My phone won't boot to os . always boot to TWRP
Anyone have a stock recovery image for this phone?
Thanks
youngz said:
Please help, My phone won't boot to os . always boot to TWRP
Anyone have a stock recovery image for this phone?
Thanks
Click to expand...
Click to collapse
you can haveit frome here
https://forum.xda-developers.com/re...ware-realme-5-pro-rmx1971ex11-090090-t3984341
full flash to restore all include recovery
pocepoke said:
you can haveit frome here
https://forum.xda-developers.com/re...ware-realme-5-pro-rmx1971ex11-090090-t3984341
full flash to restore all include recovery
Click to expand...
Click to collapse
Yes but i need stock recovery to do so, could someone share stock recovery.img please. Thanks
Regards,
Suryanda
Hi , Hello everyone
I Have gakaxy (A705FN) . it Stop getting updates from September 01, 2019
Anyone know this problem ??
When I enter download Mod , This phrase appears at the bottom of the screen :
Reboot Recovery Caose is ((bootchecker ) rebootRecoverywithkey)#
blocked-based OTA
Supported API : 3
MANUAL MOD v1.0.0#
I understood from some forums that if I flashing it with officiel rom void warranty .
Is this true ??
Two months ago I tried to unlock bootloader , and until now I don't know whether it is unlocked or Still locked.
I tried the adb command (fastboot oem device-info) But the adb tell me that waiting for device.
Then I tried this code : *#*#7378423*#*# connection problem or invalid mmi code.
is there method exept adb and dialler phone ??
Please help me to get updates by OTA
Need Help
Replies: 0 Views: 40
What's wrong with you!?
Where are you, xda senior
Have you checked that an update is available first?
I'm on September and no updates have been released yet. Same baseband as you.
Why do you want to unlock your bootloader? Checking that OEM unlocking box in the Developer settings doesn't unlock your bootloader.
Flashing anything on the phone will trip Knox and Void your warranty as well as prevent you from receiving updates including the Android 10 update coming this April. Your phone didn't stop receiving updates, it's just not available where you live yet. Just like waiting for replies to your post, you're impatient to get a security update that won't make much difference to your phone. My phone is on the November patch even though it's January and I couldn't care less, because I'm patient you should give that a try
xomikron said:
Why do you want to unlock your bootloader? Checking that OEM unlocking box in the Developer settings doesn't unlock your bootloader.
Flashing anything on the phone will trip Knox and Void your warranty as well as prevent you from receiving updates including the Android 10 update coming this April.
Click to expand...
Click to collapse
Flashing official roms with odin doesnt void any warranty.
God bless you
xomikron said:
Why do you want to unlock your bootloader? Checking that OEM unlocking box in the Developer settings doesn't unlock your bootloader.
Flashing anything on the phone will trip Knox and Void your warranty as well as prevent you from receiving updates including the Android 10 update coming this April. Your phone didn't stop receiving updates, it's just not available where you live yet. Just like waiting for replies to your post, you're impatient to get a security update that won't make much difference to your phone. My phone is on the November patch even though it's January and I couldn't care less, because I'm patient you should give that a try
Click to expand...
Click to collapse
I’m really grateful, thank you for responding to my topic
I Unlock bootloader in this manner
Step 1 – Allow bootloader unlocking in Developer options > enableOEM unlocking.
Step 2 – Power off your device. Press Volume Up + Volume Down and plug in your device to a PC to boot into download mode.
Step 3– Long press volume up to unlock the bootloader. This will wipe your data and automatically reboot.
Then I locked it again in the same manner.
I don’t know yet if the bootloader is locked or unlocked
and how to fix this : Block-Based OTA
So... have I broken my phone?
I need help
God bless you....
Thanks a lot
James.Miller said:
Flashing official roms with odin doesnt void any warranty.
Click to expand...
Click to collapse
Thanks a lot
This question puzzled me a lot and I did not find any answer :/
before Flashing official rom, will I enable OEM unlocking in Developer options ? or disable it .?
Does this term : ( Block-Based OTA ) will disappear or still appear ?
athmane_dz said:
Thanks a lot
This question puzzled me a lot and I did not find any answer :/
before Flashing official rom, will I enable OEM unlocking in Developer options ? or disable it .?
Does this term : ( Block-Based OTA ) will disappear or still appear ?
Click to expand...
Click to collapse
The other user mentioned that official firmware through Odin wouldn't trip knox which is something I've read before but wasn't sure. In any case, I forgot to mention that if you live somewhere in the European Union, a tripped knox shouldn't void your warranty. If you want to flash with Odin I do think you need to have the bootloader unlocked, but I'm not sure how you would do that.
It's time for me to end your ignorance (im looking arrogant right )
first of all you dont need to unlock your bootloader to install official firmware.
-the Reboot Recovery Cause is ((bootchecker) rebootRecoverywithkey)#
blocked-based OTA
Supported API : 3
MANUAL MOD v1.0.0# is not an error
-Block based means what it means and OTA means Over The Air.
-manual mode if just stock recovery.
-flashing latest official firmware wont trip knox/void anything.
-it's completely 'normal' that you don't have latest update if you live in an area where providers (like algeria) don't give a damn about you.
here is the firmware you should flash in order to get latest update faster than any others countries: https://samfrew.com/download/Galaxy__A70__/to3j/SEK/A705FNXXU5ASL4/A705FNOXM5ATA1/
Samsung Galaxy J6+ flashing crash - Boot loop endlessly
Hello, I have a problem with my phone : Samsung J6+ (SM-J610FN/DS) I have crached a flashing Rom with Odin and I'm sure it is because of that my phone can't start by pressing the power button. Now my phone has the message : An error has...
forum.xda-developers.com
Hi guys, I have recently update my P20 to the latest version available (10.0.0.171) on an EML-L29C432 and i was looking to flash TWRP and all i achieved is to boot on TWRP but without touchscreen.
I also figured out that we are now not allowed to flash partitions and to lock or unlock our bootloader.
Also, with the hiden dial code, in USB's behaviour, we have 3 choices, Default, Manufacture and HiSuite mode (which is the default one). Do you think there is a workaroud with that ? Or it's only for the OS session ?
As we are not allowed to flash, i can't even flash the patched recovery_ramdisk through Magisk
So do someone of you, was able to flash TWRP on EMUI 9 or EMUI 10 ?
Thanks for help
Hi, first of all you have got to check if your bootloader is unlock.
If you bought this phone soon enough and unlocked it in the meantime you are good to go mais it seems that your bootloader is not unlocked... And now it is gone for good :crying:.
Huawei has made the worst decision by not allowing people to unlock their bootloaders. I heard you can try some tools (search in the Q&A section) which are not free to unlock your bootloader.
As long as it is locked, you won't be able to flash ramdisk of system....
For a way to flash all partitions, read my guide here: How to flash custom kernel/ROM in EMUI 10 via Software Testpoint mode | XDA Developers Forums (xda-developers.com)
You can flash with locked bootloader like this.
IsatiX said:
Hi guys, I have recently update my P20 to the latest version available (10.0.0.171) on an EML-L29C432 and i was looking to flash TWRP and all i achieved is to boot on TWRP but without touchscreen.
I also figured out that we are now not allowed to flash partitions and to lock or unlock our bootloader.
Also, with the hiden dial code, in USB's behaviour, we have 3 choices, Default, Manufacture and HiSuite mode (which is the default one). Do you think there is a workaroud with that ? Or it's only for the OS session ?
As we are not allowed to flash, i can't even flash the patched recovery_ramdisk through Magisk
So do someone of you, was able to flash TWRP on EMUI 9 or EMUI 10 ?
Thanks for help
Click to expand...
Click to collapse
how did you manage to flash twrp in the first place? bacause i keep getting Partition lenght get error everytime i try
itzmeandyos said:
how did you manage to flash twrp in the first place? bacause i keep getting Partition lenght get error everytime i try
Click to expand...
Click to collapse
fastboot flash erecovery_ramdisk twrp.img