R820 firmware R820XXU1BTD3 - Samsung Galaxy Watch

Does someone have link to firmware R820XXU1BTD3 for galaxy watch active 2 44mm R820 ?

I'm also looking for this firmware, all the sites I found ask to pay for the file ... complicated so!

Hades said:
I'm also looking for this firmware, all the sites I found ask to pay for the file ... complicated so!
Click to expand...
Click to collapse
Yeah, I saw it was about 3 bucks, not much, but those sites were, how should I put it, debatable.
I need this file cuz my watch won't detect any new firmware, I am stuck on bta1, beside Samsung support said that for my particular piece should be an update available, reset didn't do the trick.

also stick in bta1

Related

Roms and Kernels

Does anyone know if the galaxy watch can flash roms and have custom OS's like on previous generations? Can it use roms made for the gear s3? What are your thoughts on the default rom with tizen 4.0? What would you want from any custom rom?
Let's start a discussion on this topic!
I am pretty sure roms from the gear s3 will not work. Also why would someone Flash an old rom on a new watch? Doesn't make any sense to me.
Source Code is here:
http://opensource.samsung.com/reception/receptionSub.do?method=search&searchValue=SM-R8
Code:
SM-R800
SM-R805F
SM-R805N
SM-R805U
SM-R810
SM-R815F
SM-R815N
SM-R815U R800XXU1ARGB,
R810XXU1ARGB,
R805USQU1ARH1,
R815USQU1ARH1,
R805NKOU1ARH9,
R815NKOU1ARH9,
R805FXXU1ARH4,
R815FXXU1ARH4
Only as info...
Btw...
Tizen 4 seems to have same Bug like 3 or 2.3 so IMHO 5 will not be much better...
It is Samsun. s h...
Best Regards
Big_Balls said:
I am pretty sure roms from the gear s3 will not work. Also why would someone Flash an old rom on a new watch? Doesn't make any sense to me.
Click to expand...
Click to collapse
I was just wondering whether or not they would be similar. I've seen a phone before that could run a rom from another phone, that's why I was asking. Didn't expect much tbh
Hi all. Can anyone help me with a odin files for the first software of this watch. I am have the next problem:
Hello! Since the new software update earlier this week I am having a problem with my screen brightness setting which I have set at 8. When my watch goes into AOD mode, after the 15 second screen timeout, and then when the screen goes back on again the brightness setting is down to 3. Then I change it back to 8, the screen goes into AOD, and when the screen goes back on it is down to 3 again. Every time. Never had a problem like this before the recent software update, or on my Gear S3 for years. I turned the watch off for a few hours, and then turned it back on, but the problem persists. Has anyone else had this problem, or know how to fix it? Thanks!!!
Please can anyone hrlp me with the idin files plss
@cboghiu
Model Name?
SM-R800 or SM-R815 or ..?
Best Regards
SM-R800
Thanks.
Code:
R800XXU1[B]ARH3[/B]_OXA1ARH3
I have this Firmmware for Odin...
IMHO oldest... "first"...
Confirmed as working for few users...
If you need PM me...
Best Regards
Edit 1.
This seems the Update history for SM-R800... BRJ4 latest...
Code:
R800XXU1ARH1/R800OXA1ARH1
R800XXU1ARGC/R800OXA1ARGC
R800XXU1BRH3/R800OXA1BRH3
R800XXU1BRJ4/R800OXA1BRJ4
Edit 2.
These Versions on paid sites...
https://easy-firmware.com/index.php?a=downloads&b=folder&id=35740
http://www.gsm2file.com/index.php?file=/Samsung Flash Files/R Series/R800 Gear S4 Firmware
Code:
R800XXU1ARH1_R800OXA1ARH1
R800XXU1ARH3_R800OXA1ARH3
R800XXU1BRH3 R800OXA1BRH3
R800XXU1BRI6
R800XXU1BRJ4 R800OXA1BRJ4
netOdin + some maybe helppfull infos + Videos:
https://forum.xda-developers.com/showpost.php?p=73503787&postcount=150
Confirmed also working with SM-R8.. devices.
Best Regards
Thanks you very much for the firmware and for the netodin. I knew about net odin. But you git me worry o bit if it is safe to fkash yhe h3 verson over the j4(last one with i have, the one with tge bug) fir ne not to brick tge watch.
Thanks again.
Own risk...
I have no feedback about downgrade from R800XXU1BRJ4...
Remember Samsungs "great" Rollback Prevention cra ehm """feature"""...
Best Regards
got the source code for the galaxy watch from the above link, now just trying to find the MP3 files that control notifications. anyone have any ideas?
@Shadow_Sheik
You mean this Source Code?
Code:
SM-R800_Opensource.zip
https://forum.xda-developers.com/showpost.php?p=77896792&postcount=3
IMHO not all files inside to create whole Platform stuff what is inside rootfs.img and/or csc.img...
If you mean Linux Kernel aka dzImage...
Best Regards
Request USB Pinout... for SM-R800 and SM-R810.
Thanx in advance.
Best Regards
Can somebody help to compile Kernel for SM-R8...?
I mean as some tiny exercise...
https://forum.xda-developers.com/showpost.php?p=78281382&postcount=662
These are my attempts...
Best Regards
fw files
can anyone send me a link to the fw files?
SM-R800
https://forum.xda-developers.com/showpost.php?p=78393393&postcount=667
Progress in build Kernel...
Only as info...
Best Regards
Nice Video about SM-R800 SM-R810... and USB cable:
https://www.youtube.com/watch?v=oQNOaZ8-BTQ&feature=youtu.be
Only as info.
Best Regards
SM-R810x
Hello Adfree.
Nice video btw. Thanks for that.
I have the exact same issue like Alejandro in the video, and the exact same model: SM-810X.
Is there any way you can provide me with the rom files for this model? I would like to give it a try, and flash the files, rather keep it in the drawer...
Much appreciated any help.
Cheers!
https://4pda.ru/forum/index.php?showtopic=911358&st=10040#entry80798650
Here are few Firmwares for SM-R800 and SM-R810 and also for SM-R810X
@TrancY01
2 of these Firmware for SM-R810X Live Demo Unit
Attention for the others...
XXX is WRONG and can brick your device!
So it is important to check filename with open eyes... to find XX or XXX
I mean no films for adults...
I mean this:
Code:
R810[COLOR="Red"][B]X[/B][/COLOR]XXU1ARH1
R810[COLOR="Red"][B]X[/B][/COLOR]XXU1ARJ1
Best Regards

Should I have to pay for the Stock T520 kitkat rom?

Want to restore back to original rom, and have spent a good hour hunting, only to end up at either samobile who want to charge e15, or some other shady sites where y ou have to pay for access...
Is this just the way things are?
Anyone able to share this rom?
At https://www.sammobile.com/firmwares/galaxy-tab-pro/SM-T520/ I do not see anything telling me to pay.
If you actually select a rom, you see this below the file...
This archived firmware is only available for premium users.
Please click here to become premium.
Click to expand...
Click to collapse
Which sort of contradicts the info on the previous page:
Here you find all the latest firmwares for the GALAXY Tab PRO SM-T520, if you want to flash your device with the newest Samsung software. Before downloading, make sure your device has the exact model code SM-T520. You can download the most recent GALAXY Tab PRO firmwares for free, or check out our cheap but fast download options.
Click to expand...
Click to collapse
I know the firmware is old, but its still the latest!
Did you log in. I registered long time ago at sammobile to be able to download. That worked for about 8 years without paying anything, but downloadspeed is anoying low.
Ok, I just logged in and saw , you have to pay. Free firmware downloads for members are only for recent firmware. Cause we're far from recent, we have to pay for the archive files. F...k you Samsung.
As I said in another thread some years ago, this tablet was my last Samsung device I bought, due to their superior support.
Here's a link for the German (DBT) and the Dutch (PHN) stock firmware. I think the dutch one was newer, although there's probably not much of a difference.
https://drive.google.com/open?id=14Ryo43jjI2gcVGDINUJxV4GfMl3lDwDL
Here is a link to the US version:
https://drive.google.com/open?id=0B5076OsZGx-_MFh5QTRlQWpHems

Galaxy Watch SM-R800NZSAXAR Won't boot. Need help With Odin and FW version.

Hello.
Long time lurker, 1st time subscriber here.
I have a Galaxy watch, 46mm, SM-R800NZSAXAR. US version, non LTE. I have it with the latest firmware that was released for it about a month or two ago. I just dont know the serial for that FW version.
My issue is that, the Watch, suddenly turned off, and when i try to boot it up, it shows the "Samsung Galaxy Watch" logo, and turns off again. I can access the download mode, the Odin mode and have even tried the "Recovery" option but this does not work.
I've read on other threads that I can try to re-flash the FW to the device via NetOdin and the right FW version and that MIGHT help getting it back up working. Thing is, i have NO IDEA what FW version to get. I see all sort of numbering but i cannot tell which one should i get, and the information i have come accross is confusing.
So, could you guys point me in the right direction, so maybe i get the proper FW and try to repair my watch? I've already talked with Samsung Customer Support, and they want me to send the device for repair... thing is I'm not in the US no more, and that'd be a real pain in the ass.
Thank you in advance.
Pudiste repararlo
Me pasó lo mismo con el mismo modelo flashee con lo que encontré y ya funciona aunque tiene tizen 4.0.0
kaspalone said:
Hello.
Long time lurker, 1st time subscriber here.
I have a Galaxy watch, 46mm, SM-R800NZSAXAR. US version, non LTE. I have it with the latest firmware that was released for it about a month or two ago. I just dont know the serial for that FW version.
My issue is that, the Watch, suddenly turned off, and when i try to boot it up, it shows the "Samsung Galaxy Watch" logo, and turns off again. I can access the download mode, the Odin mode and have even tried the "Recovery" option but this does not work.
I've read on other threads that I can try to re-flash the FW to the device via NetOdin and the right FW version and that MIGHT help getting it back up working. Thing is, i have NO IDEA what FW version to get. I see all sort of numbering but i cannot tell which one should i get, and the information i have come accross is confusing.
So, could you guys point me in the right direction, so maybe i get the proper FW and try to repair my watch? I've already talked with Samsung Customer Support, and they want me to send the device for repair... thing is I'm not in the US no more, and that'd be a real pain in the ass.
Thank you in advance.
Click to expand...
Click to collapse
Why not just exchange it?
- R. Kruse Ludington
Galaxy Note 8<-5<-3<-S3<-Nexus; Droid X; HTC HD2<-Touch Pro 2<-Tilt<-8525; O2 XDA II<-XDA; Motorola StarTac
KruseLudsMobile said:
Why not just exchange it?
- R. Kruse Ludington
Galaxy Note 8<-5<-3<-S3<-Nexus; Droid X; HTC HD2<-Touch Pro 2<-Tilt<-8525; O2 XDA II<-XDA; Motorola StarTac
Click to expand...
Click to collapse
With whom? why? How?
Where I Live, doing that kinda thing is not that easy. Besides, I still want my watch.
netOdin only 1 Version leaked... since monthS... yearS...
But still work...
Look here about how to use...
https://forum.xda-developers.com/showpost.php?p=73503787&postcount=150
Now you need Firmware for your SM-R800...
Please try to search to through Threads here... somewhere few users posted Links...
Best Regards
Edit 1...
Clicking weired around...
https://forum.xda-developers.com/smartwatch/galaxy-watch/update-firmware-netodin-t3895010
Edit 2...
Clicking weirder and harder leads to this post...
https://forum.xda-developers.com/showpost.php?p=79689619&postcount=44
adfree said:
netOdin only 1 Version leaked... since monthS... yearS...
But still work...
Look here about how to use...
https://forum.xda-developers.com/showpost.php?p=73503787&postcount=150
Now you need Firmware for your SM-R800...
Please try to search to through Threads here... somewhere few users posted Links...
Best Regards
Edit 1...
Clicking weired around...
https://forum.xda-developers.com/smartwatch/galaxy-watch/update-firmware-netodin-t3895010
Edit 2...
Clicking weirder and harder leads to this post...
https://forum.xda-developers.com/showpost.php?p=79689619&postcount=44
Click to expand...
Click to collapse
Hey, hello!
I read thru them already, and that's what got me confused. Cuz it was not clear which one was the most recent or the right one for an SM-R800 US. Could you tell me or guide me on how to determine which one would be the right one to get before proceeding?
Thanks.
most recent
Click to expand...
Click to collapse
Alphabet...
SM-R800 US
Click to expand...
Click to collapse
All in 1 package...
ALL CSC...
US is CSC XAR
SM-R800NZSAXAR
Click to expand...
Click to collapse
You see XAR...
CSC means something like Customer Sales Code...
IMHO try this:
Code:
OXA_EU_R800XXU1[B]C[/B]SE1.zip
More then it will explode...
In worst case... if you still out of luck... you need USB cable...
Look at Video:
https://forum.xda-developers.com/showpost.php?p=78545468&postcount=74
Good Luck.
Last hint:
OWN risk!
Best Regards
Here is overview about valid Firmwareversions for XAR ( US region):
http://doc.samsungmobile.com/SM-R800/XAR/doc.html
I hope you see why I wrote Alphabet...
All files are leaked... :angel:
Nobody shared latest CRG4 in public...
Best Regards
adfree said:
Here is overview about valid Firmwareversions for XAR ( US region):
http://doc.samsungmobile.com/SM-R800/XAR/doc.html
I hope you see why I wrote Alphabet...
All files are leaked... :angel:
Nobody shared latest CRG4 in public...
Best Regards
Click to expand...
Click to collapse
I understood the Alphabet reference. I was thinking it had something to do about it but was not sure.
Anyway, i followed your "advice" and downloaded the FW, flashed it, the procedure finished properly (NetOdin said it was successful), Watch restarted, and NOTHING happened. It's still not booting. Just shows the logo and turns off again. So I'm thinking is really a hardware problem. I'm gonna have to send it back to the USA for repairs and hope they honor the warranty.
I still dont understand why cant I buy the product in one country and get service for it in another if it's withing the warranty time.... but w/e.
Thanks man for your help. This will deter me from buying anything Samsung for awhile.
Sorry to read about no real success...
If you have time... you could check ODIN Mode... look here as example:
https://forum.xda-developers.com/showpost.php?p=73607036&postcount=1
You could upload Photo if you want... or write all infos as text...
Maybe Warranty Void value allready changed...
Best Regards
Edit 1.
Here is Video about Galaxy Watch... how to enter and leave Odin aka Download Mode:
https://www.youtube.com/watch?v=i38frp0xqyU
But my eyes can not see the Values...
Code:
0 (0x0000)
This is "best"...
All other Values are not good in case of warranty...
adfree said:
Sorry to read about no real success...
If you have time... you could check ODIN Mode... look here as example:
https://forum.xda-developers.com/showpost.php?p=73607036&postcount=1
You could upload Photo if you want... or write all infos as text...
Maybe Warranty Void value allready changed...
Best Regards
Edit 1.
Here is Video about Galaxy Watch... how to enter and leave Odin aka Download Mode:
https://www.youtube.com/watch?v=i38frp0xqyU
But my eyes can not see the Values...
Code:
0 (0x0000)
This is "best"...
All other Values are not good in case of warranty...
Click to expand...
Click to collapse
Hello.
This is the data you requested:
ODIN MODE
Product name: SM-R800
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
REACTIVATION LOCK: Off
Secure Download: Enabled
CARRIER ID:
WARRANTY VOID: 0 (0x0000)
AP SWREV: B:1 K:0 S:0
I have absolutely no idea what happened with the device. It just wont boot beyond the logo.
If you have something else i could try, lemme know. Getting if service by an official samsung rep will be a daunting task, since is a US device and i Dont live in the US... is covered with a warranty tho. I just have to jump thru a lot of hoops to send it there.
Thanx for info.:good:
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
Click to expand...
Click to collapse
Official looks good... otherwise something like Custom....
REACTIVATION LOCK: Off
Click to expand...
Click to collapse
OFF is IMHO better as ON if you have trouble... = less Security
WARRANTY VOID: 0 (0x0000)
Click to expand...
Click to collapse
All Zero is best... otherwiseyou got more problems for Service Repair... but as you told... other contry = nearly NO chance...
IMHO
I would test this Factory/Service Firmware...
Code:
OXA_[B]COMBINATION[/B]-FT40_R800XXU1ARI2.tar.md5.zip
If this Firmware starts complete on your SM-R800... check if WiFi and BT is usable...
Then you could try to flash again Stock Firmware...
Again.
OWN risk... not official supported by Samsung because leaked Tool + leaked Firmware...
Best Regards
adfree said:
Thanx for info.:good:
Official looks good... otherwise something like Custom....
OFF is IMHO better as ON if you have trouble... = less Security
All Zero is best... otherwiseyou got more problems for Service Repair... but as you told... other contry = nearly NO chance...
IMHO
I would test this Factory/Service Firmware...
Code:
OXA_[B]COMBINATION[/B]-FT40_R800XXU1ARI2.tar.md5.zip
If this Firmware starts complete on your SM-R800... check if WiFi and BT is usable...
Then you could try to flash again Stock Firmware...
Again.
OWN risk... not official supported by Samsung because leaked Tool + leaked Firmware...
Best Regards
Click to expand...
Click to collapse
I'm making arrangements to send it to Samsung US to get it repaired. If all fails, then I'll get my hands dirty again. It's still covered by the warranty, the problem is to get it to Samsung US hands for repair.
Thanks for your help tho. I'll keep this bookmarked for future reference.
kaspalone said:
I'm making arrangements to send it to Samsung US to get it repaired. If all fails, then I'll get my hands dirty again. It's still covered by the warranty, the problem is to get it to Samsung US hands for repair.
Thanks for your help tho. I'll keep this bookmarked for future reference.
Click to expand...
Click to collapse
Hi,
I have the same problem with the clock, did you manage to repair it?
mangust479 said:
Hi,
I have the same problem with the clock, did you manage to repair it?
Click to expand...
Click to collapse
I solved the problem with my watch in the following way:
1. Firmware R800XXU1DSL1 (available at 4pda) using the standard method, but you MUST include the Phone Bootloader Update check box in Odin. Then press Start, Odin will update the firmware and swipe a new loader to fix the problem. It helped me, I also tried to repair the clock for 2 weeks with the same problem and wanted to carry them to the service.

Galaxy watch SM-R805UZSAXAR/ R805USQUIBRJ6 update

Hi there xda mates
I Just recived my new watch that i bought in amazon, and i Would like to update its Tizen verision to the last one UI .. But some how i could not find the update in my watch*
1)i found here some upgrade guides for similaier models, but not exectly mine, will it still work?
2)if this wont work, so what firmware guide wiill?
3)i really want this update, is there any other ways to get it?
Thanks in advance*
shinsplit24701 said:
Hi there xda mates
I Just recived my new watch that i bought in amazon, and i Would like to update its Tizen verision to the last one UI .. But some how i could not find the update in my watch*
1)i found here some upgrade guides for similaier models, but not exectly mine, will it still work?
2)if this wont work, so what firmware guide wiill?
3)i really want this update, is there any other ways to get it?
Thanks in advance*
Click to expand...
Click to collapse
No one?? ? ?
SM-R805UZSAXAR/ R805USQUIBRJ6
Click to expand...
Click to collapse
If I see this... IMHO you have US device for US market... SM-R805U...
IMHO you can ONLY use Firmware of this EXACT Model Name... nothing else or you create tiny little trouble...
You can brick your device with wrong Firmware...
If you use Google with this Search word:
Code:
R805USQUIBRJ6
You will find your 2 posts...
Try instead this:
Code:
R805USQU1[B]BSE3[/B]
https://doc.samsungmobile.com/SM-R805U/ATT/doc.html
Strange... I can not see for XAR... but for ATT ...
T-Mobile... US:
https://support.t-mobile.com/docs/DOC-38218
Code:
R805USQU1[B]CSK1[/B]
One UI 1.5 Update
Click to expand...
Click to collapse
This Version is not leaked as netOdin package...
Best Regards
adfree said:
If I see this... IMHO you have US device for US market... SM-R805U...
IMHO you can ONLY use Firmware of this EXACT Model Name... nothing else or you create tiny little trouble...
You can brick your device with wrong Firmware...
If you use Google with this Search word:
Code:
R805USQUIBRJ6
You will find your 2 posts...
Try instead this:
Code:
R805USQU1[B]BSE3[/B]
https://doc.samsungmobile.com/SM-R805U/ATT/doc.html
Strange... I can not see for XAR... but for ATT ...
T-Mobile... US:
https://support.t-mobile.com/docs/DOC-38218
Code:
R805USQU1[B]CSK1[/B]
This Version is not leaked as netOdin package...
Best Regards
Click to expand...
Click to collapse
Thank you my friend!!!
So if i search for this model R805USQU1BSE3 here or by Google, there's a good chance that you will be able to find an update that is suitable for my watch?
P. S sorry for my English ?
shinsplit24701 said:
Thank you my friend!!!
So if i search for this model R805USQU1BSE3 here or by Google, there's a good chance that you will be able to find an update that is suitable for my watch?
P. S sorry for my English ?
Click to expand...
Click to collapse
Please ignore my previous reply.. ?
I searched for my watch version R805USQUIBRJ6 and found the same version on T-mobile!
website... https://s.amsu.ng/fErEQ423dbeN
So what is my next step from here?
I new at this.. So Thanks for your patience
Oh...
BSE3 and 2 more are for instance here:
https://forum.xda-developers.com/smartwatch/galaxy-watch/firmware-r805u-t3936826
Best Regards
Hello all can anyone give me some information on my watch, just got last week. I have not received the update yet. I'm in the USA and on Verizon.
SMR805UZSV any information would be greatly appreciated.
Hello all can anyone give me some information on my watch, just got last week.
Click to expand...
Click to collapse
Maybe other users have Crystal Ball... I have no Crystal Ball.
Easy things to do... to find usefull infos...
A
We type funny Code into our Watch:
Code:
*#1234#
This Code is IMHO working in Samsung Phones etc more then 10 years...
B
Active CSC...
User described here 1 easy way:
https://forum.xda-developers.com/showpost.php?p=81190183&postcount=31
Their are few more ways to identify the active CSC in your device...
Methods like ... I can smell... or I thought I bought it in... are less helpfull in case of identifying what is important for "Firmware update" questions...
Best Regards
TMB Lies.... Again
Update 2/3/2020:
T-Mobile support just successfully pushed R805USQU1CSL2 to my watch
3rd time lucky
Thanks T-Mobile
adfree said:
If I see this... IMHO you have US device for US market... SM-R805U...
IMHO you can ONLY use Firmware of this EXACT Model Name... nothing else or you create tiny little trouble...
You can brick your device with wrong Firmware...
If you use Google with this Search word:
Code:
R805USQUIBRJ6
You will find your 2 posts...
Try instead this:
Code:
R805USQU1[B]BSE3[/B]
https://doc.samsungmobile.com/SM-R805U/ATT/doc.html
Strange... I can not see for XAR... but for ATT ...
T-Mobile... US:
https://support.t-mobile.com/docs/DOC-38218
Code:
R805USQU1[B]CSK1[/B]
This Version is not leaked as netOdin package...
Best Regards
Click to expand...
Click to collapse
T-Mobile now shows:
Baseband version:
R805USQU1CSL2
R815USQU1CSL2
Available January 27, 2020
UI graphical element changes (UI 1.5)
S Health enhancements (Outdoor swimming trajectory & distance enhanced. Auto-session calorie logic added. Heart rate calorie calie logic added.)
Updated to Bixby 2.0New watch faces
This new version is NOT yet available, don't know who keeps updating their "latest version" page, but they should be fired... ?
Cost me hours of phone time with TMB support then Samsung support, only to find out here that Version R805USQU1CSL2 is still in r&d, not ready for distribution yet... And so we wait. ?
Thank you very much for the information.
...Version R805USQU1CSL2 is still in r&d, not ready for distribution yet
Click to expand...
Click to collapse
IMHO not 100% correct...
A
Unknown if you go to T-Mobile Service... maybe they flash CSL2
But B.
I am 100 % sure this Firmware is leaked and ready to use with netOdin.
https://forum.xda-developers.com/showpost.php?p=81650159&postcount=395
Own risk!
But you can wait and wait and wait... or you try...
If trash... you can go back to BSE3 IMHO also leaked and free available as netOdin package...
Best Regards
Thank you for the link, I've downloaded it.
T-Mobile service, at least the people I've spoken to here in the USA don't seem to know much about the Samsung Watch... At all.
I'll wait a bit longer for answers to questions I've sent them. If they still can't help, I'll flash it myself.
Thanks again for all your help ????
I thought I'd give T-Mobile support one more try... 3rd time lucky ? I reached some one who knows their stuff.
They pushed the update to my R805U a few minutes ago.
The update worked smoothly, busy applying the new Bixby update... Then I'll take a look around and checkout the new stuff.
However, I have no idea why the Wearable App would not get the update initially.
Thanks for the help. ??

Samsung s20 Ultra Exynos ( Stuck on February 1st 2020 Update )

Hello everyone, this is my very first post here
I hope I posted this in the correct section of the forums. If not please point me out where I should place it! And sorry for the intrusion!
So basically my S20 Ultra ( Exynos variant SM-G988B/DS ) is stuck on February 1st, 2020 Update. My current version is G988BXXU1ATB3 /G988BOXM1ATB5 /G988BXXU1ATB2
I am pretty sure there have been tons of updates mainly to address the early camera issues, but I can't seem to make it visible to my current device so I can upgrade.
Is there a workaround in order to 'force' an update or I am missing something there?
Excuse my noobness
And nice to meet you all!
Xeonixgr said:
Hello everyone, this is my very first post here
I hope I posted this in the correct section of the forums. If not please point me out where I should place it! And sorry for the intrusion!
So basically my S20 Ultra ( Exynos variant SM-G988B/DS ) is stuck on February 1st, 2020 Update. My current version is G988BXXU1ATB3 /G988BOXM1ATB5 /G988BXXU1ATB2
I am pretty sure there have been tons of updates mainly to address the early camera issues, but I can't seem to make it visible to my current device so I can upgrade.
Is there a workaround in order to 'force' an update or I am missing something there?
Excuse my noobness
And nice to meet you all!
Click to expand...
Click to collapse
are you rooted or unlocked bootloader ?
Xeonixgr said:
Is there a workaround in order to 'force' an update or I am missing something there?
Excuse my noobness
Click to expand...
Click to collapse
There are few threads crated on a daily that ask for the same. Just learn to flash it on your own via odin. No problem if you are noob... the problem if you don't use the search function and learn and move on from your noobness.
Download the firmware via SamFirm and flash it with odin. Stop waiting to receive OTA. Stay up to date, if you see there is a new update repeat those steps and you will always have the newest firmware.
yodainascoda said:
are you rooted or unlocked bootloader ?
Click to expand...
Click to collapse
My phone is 100% stock, no roots or other things -which I am learning as we speak -
chieco said:
There are few threads crated on a daily that ask for the same. Just learn to flash it on your own via odin. No problem if you are noob... the problem if you don't use the search function and learn and move on from your noobness.
Download the firmware via SamFirm and flash it with odin. Stop waiting to receive OTA. Stay up to date, if you see there is a new update repeat those steps and you will always have the newest firmware.
Click to expand...
Click to collapse
Thank you very much for directing me to the right path, I was not sure of what search criteria I should type to find my solution Sorry.
These solutions will void my warranty or anything? Also as I am noob, is there danger to destroy my phone?
Xeonixgr said:
Thank you very much for directing me to the right path, I was not sure of what search criteria I should type to find my solution Sorry.
These solutions will void my warranty or anything? Also as I am noob, is there danger to destroy my phone?
Click to expand...
Click to collapse
This solution will not void your warranty. After you downloaded the firmware via SamFirm you will have in the extracted folder two kinds of a file that's called CSC. One of them is called HOME_CSC you need to flash/choose the HOME one in order to keep all your data.
chieco said:
This solution will not void your warranty. After you downloaded the firmware via SamFirm you will have in the extracted folder two kinds of a file that's called CSC. One of them is called HOME_CSC you need to flash/choose the HOME one in order to keep all your data.
Click to expand...
Click to collapse
Thank you! Can I change it to w/e country I want? If so, which Country has the 'fastest' updates atm?
Xeonixgr said:
Thank you! Can I change it to w/e country I want? If so, which Country has the 'fastest' updates atm?
Click to expand...
Click to collapse
I doesn't matter anymore, G988BOXM1ATB5 they put everything in one pot, OXM is generic. And you can't change that that easily or for free anymore.
chieco said:
I doesn't matter anymore, G988BOXM1ATB5 they put everything in one pot, OXM is generic. And you can't change that that easily or for free anymore.
Click to expand...
Click to collapse
Fantastic, thank you. So that means I can download whatever GSC I want and it should work perfectly with my phone?
trying to find out which is the best for my Exynos s20 Ultra but being a noob is very hard
SamFirm does it for you. Just enter G988B in the device slot and OXM for the CSC slot. It's going to show you the right/newest one.
Just an update, I successfully updated to the latest firmware using ODIN, I was nervous at first but the process is really straightforward. Still having focus problems with my s20 ultra tho, but that is a story for another
Thanks, everyone for guiding me to the right path!

Categories

Resources