Related
Samsung Galaxy S6 Edge G925A (US version AT&T) - upgrade to G925F (european version)
Hi there!
Please let me question... I purchased US AT&T version of Samsung Galaxy S6 edge G925A. It is possible to modify to G925F (europe version)? I would like to load original EU ROM because I don´t need any AT&T application and I would like also to have Czech language... And one more question - If is it possible - after this change - will be any effect to network unlock of device? I bougth network unlock for my EU network carrier ... so I don´t want to lose it ...
Thanks for any reply!
hatasek said:
Hi there! Please let me question... I purchased US AT&T version of Samsung Galaxy S6 edge G925A. It is possible to modify to G925F (europe version)? I would like to load original EU ROM because I don´t need any AT&T application and I would like also to have Czech language... And one more question - If is it possible - after this change - will be any effect to network unlock of device? I bougth network unlock for my EU network carrier ... so I don´t want to lose it ... Thanks for any reply!
Click to expand...
Click to collapse
Your best bet is to post this question within the following thread.
http://forum.xda-developers.com/showthread.php?t=3053516
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT PROVIDE SUPPORT VIA PM UNLESS ASKED/REQUESTED BY MYSELF.
PLEASE KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Hello!
Just purchased a Samsung Galaxy Watch in Dubai. I live in Spain, so I would like to use Samsung Pay in that country. However, I can only configure Samsung Pay as United Arab Emirates. I have read that in order to make it work, I have to flash the specific firmware for the desired location (in this case, Spain) with Odin. I have found some tutorials on how to do that, but I cannot find the appropiate firmware for my device. Here is the info:
Model number: SM-R800
Tizen version: 4.0.0.1
Software version: R800XXU1BRK3
Has anyone done this before? Where can I find the appropiate firmware?
Thanks!
You don't have to flash firmware specific to the desired location, you have to update the csc (also resets the watch) to represent the location you want.
How to: https://forum.xda-developers.com/sm...r805f-csc-change-howto-esim-rsp-v2-x-t3848292
CSC list: https://forum.xda-developers.com/showthread.php?t=2546689
For me, I purchased the international version in the US and Samsung Pay did not work in Sweden, I changed the csc to NEE (nordics) following the guide above and I can now use Samsung Pay in Sweden.
Maybe this attached Video explain "something":
https://forum.xda-developers.com/showpost.php?p=78938105&postcount=726
It is possible with Watch Face to:
A
Verify... check active CSC/Sales Code
B.
Change CSC/Sales Code
Only problem at the moment...
Such Watch Face not in Store... """Security reason"""...
And...
Best Regards
Thank adfree and siwan05 for your kind replies. I was able to change the CSC of my watch without problem. However, it turns out that my bank is not compatible with Pay on Watch (only with Samsung Pay app). Nevertheless, your advice worked perfectly.
Thanks!
I can't get the update to One UI 1.5 announced here, could I change my CSC to other country, update my device and change again to my original CSC?
Make that would disable Samsung Pay in my Galaxy Watch?
How could I check what regions have the latest version of One UI?
Hi for the France... 2020
jordi.badia said:
Thank adfree and siwan05 for your kind replies. I was able to change the CSC of my watch without problem. However, it turns out that my bank is not compatible with Pay on Watch (only with Samsung Pay app). Nevertheless, your advice worked perfectly.
Thanks!
Click to expand...
Click to collapse
How to change csc? I have galaxy watch 46mm SM- R800
I from Malaysia, my watch buy from Australia. Cannot using samsung Pay
Tizen 4.0.0.7
R800XXU1DSL1
Hey Guys,
The title is pretty self-explanatory, I purchased a Galaxy Watch active from a Hong Kong seller not realising it would stop me from using Samsung Pay. As it is a new model I've only found one copy of the Firmware .MD5 files and the CSC is not the Australian one (which is the country that I live in). Is it possible to change the CSC code and thus the region of the .MD5 file so I can Flash my watch and get it onto the right region and unlock Samsung Pay?
I apologise if this is a stupid or naive question this is all brand new to me and I'm still trying to keep up.
Highpryority said:
Hey Guys,
The title is pretty self-explanatory, I purchased a Galaxy Watch active from a Hong Kong seller not realising it would stop me from using Samsung Pay. As it is a new model I've only found one copy of the Firmware .MD5 files and the CSC is not the Australian one (which is the country that I live in). Is it possible to change the CSC code and thus the region of the .MD5 file so I can Flash my watch and get it onto the right region and unlock Samsung Pay?
I apologise if this is a stupid or naive question this is all brand new to me and I'm still trying to keep up.
Click to expand...
Click to collapse
Hey i found this post https://forum.xda-developers.com/sm...r805f-csc-change-howto-esim-rsp-v2-x-t3848292
It should technically work. Let me know if it does please as i have ordered a galaxy watch import as well (HK to Australia) and only just found this out.
EDIT: Also look at this link https://forum.xda-developers.com/showthread.php?t=2546689 it should provide the right code for the Australian firmware
DX3_Lory said:
Hey i found this post https://forum.xda-developers.com/sm...r805f-csc-change-howto-esim-rsp-v2-x-t3848292
It should technically work. Let me know if it does please as i have ordered a galaxy watch import as well (HK to Australia) and only just found this out.
EDIT: Also look at this link https://forum.xda-developers.com/showthread.php?t=2546689 it should provide the right code for the Australian firmware
Click to expand...
Click to collapse
Hey, sorry for the delay in reply I was able to simply push the change of the region following this tutorial: https://l.messenger.com/l.php?u=https%3A%2F%2Fforum.xda-developers.com%2Fsmartwatch%2Fgear-sport%2Fchanging-region-samsung-gear-sport-r600-t3771324&h=AT3gL1EJTD_LzPupE_pcei82eesT1O0MKpVQZGSgoTro4ovlL9xync975ADDZ67vB2UNTW7C_4dmZ5WRKU3anMSWN8dssfrihNs8SZH3LfhrIVqv-wn2MKbt5fW4K_jCN3hLiObSfgARdyN3SlnrVw no need to fuss about finding the right software or even cracking into the watch it was dead easy and wireless.
Hope this helps!
I've tried the region reset on my SM-R500, but I can't find the Irish (or UK) network providers in the list when doing the reset. I've got a watch that was set to UAE, so I'm guessing that specific firmware doesn't come with Irish regional settings? Any workaround to this? Is it possible to flash a suitable firmware and if so, where would I find the correct firmware?
Hi guys,
First post, so please let me off if I haven't followed protocol properly. I have been looking at all the other threads and posts and I have come to the conclusion that this is possible, but I need some guidance:
Bought the watch second hand. Samsung Pay isn't available. Samsung Tech help believe the watch isn't from the UK. I also believe this to be true, as when it is reset, the first language to appear is German, before it syncs with the phone and changes to English.
So I would like to change the region from Germany to England to get Samsung Pay enabled.
I have downloaded NetOdin3
I am capable of connecting to the watch in boot mode through wireless.
I have downloaded the combination firmware and stock firmware from https://forum.xda-developers.com/sm.../samsung-galaxy-watch-mactive-2-gwa2-t3968437 where adfree posted the links.
This is where I am stuck. I am unsure if these are the right files for the UK, because that thread was to change it from Germany to "ser"
From what I've read I need to change some text in the combination firmware, but how do I do this, in NetOdin3? or some other program.
Secondly what do I need to change it from and to? I understand its to get the region from Germany to UK, but what is the region code for the UK?
I appreciate I am a total beginner and have probably just asked some real basic questions, however after reading the thread about the guy who flashed his 820 with 830 firmware and bricked it, I'm a little more worried about getting something wrong.
Cheers in advance
You have to change from DBT to BTU..BTU is UK CSC.
Best regards
Mithos11 said:
You have to change from DBT to BTU..BTU is UK CSC.
Best regards
Click to expand...
Click to collapse
OK, thanks.
So do I need to edit the files that @adfree linked in SDP?
or are those files ready to go and do I need to edit some files off the watch somehow?
Cheers
Hi,
you should read this post and follow the guide here:
https://forum.xda-developers.com/smartwatch/galaxy-watch/changing-region-galaxy-active-2-t3983895
Mithos11 said:
Hi,
you should read this post and follow the guide here:
https://forum.xda-developers.com/smartwatch/galaxy-watch/changing-region-galaxy-active-2-t3983895
Click to expand...
Click to collapse
Thanks, the video on the last page made it much easier to understand the instructions, especially if you havent done this before. it was in russian, but its easy enough to follow.
all sorted now, samsung pay working. great stuff
Cheers
Pannatone
Oh, quick question, after doing all this, will it be ok to install updates from samsung as they come, just as normal?
pannatone said:
Oh, quick question, after doing all this, will it be ok to install updates from samsung as they come, just as normal?
Click to expand...
Click to collapse
You will normally receive the update via OTA!
I'm looking for latest R820XXU1BTA1 stock firmware.
Change region Samsung Active 2 with Tizen 5.5.0.1 for SM-R835 (LTE version)
Hello, I have recently purchesed and Samsung Active 2 but as soon as I have paired I got an update and I have updated without thinkning what will that mean , but any way I am looking for files to change the region for Samsung Active 2 with Tizen 5.5.0.1 and SM-R835 .
Please help !!!!
Where can I find Combination & Firmware file for R835 Active 2 LTE I am looking to change from German to UK ? thanks
Bro
I have watch active 2 SM-R820
And i change the region INU to BTU
After i change the region i still not get Samsung health Monitor app
And also try some region like XAR,Koo
But I still unable to get Samsung health Monitor app what I do
please help
Dear Valued Team,
I Have Purchased S20 Ultra SM-G9880 OZS1 ATCT, Taiwan Version BRI snapdragon. And iam from egypt which sell the exynos version.
I Found Call Recording Not Present and samsung members is in Chinese language.
My question,
1 - can i flash rom G988U instead of G9880 to get the call recording enabled and phone samsung member in english
2- if not, how can i customize the G9880 to meet my requirements like call recording & language,,etc
3- is there a custom rom for g9880 which enable all features like usa version or global version, or i already stucked with the g9880
4- why there's no option for 5G network
im from egypt too all i did is installing open china software you will get everything you need
call recording and 5G option also
This is very good news bro.
this is very good news brother.
Please could you inform me how can i install this china open software. From where i can download it and how to install this software.
Many thanks in advance.
Done and 5 star
thanks i did it. I downloaded from sammobile. After flashing the firmware l, i didn't find google service. I installed the google play store manually. After that installed the apps if google. And i get call recording. Thanks for your information.
Samsung members & Samsung pay will always be in Chinese whatever you did it is locked to the origin of the phone , and you will not be able to test 5G network in Egypt for at least 3 years , may be with s23 :laugh:
Any way where both of you got the taiwan version in Egypt, I want to get one for myself also
From AS Mobile in Facebook
i get it from AS Mobile Page on Facebook
Samsung pass
the only problem i faced till now in open China software is Samsung pass. Samsung pass not installed in this software and i try to install it by download apk but it didn't work
To get samsung pass you should flash hongkong firmware but you will sacrifice call recording but you will keep 5g which is not usable in Egypt anyway
did you find any issue with CHC rom in egypt?
Are you still using it?
ارجو التوضيح ما الفروقات في الاستخدام بين نسخه هونج كونج و التايوان و الصين المفتوح وشكرا
Please clarify what are the differences in usage between the Hong Kong version and Taiwan and China Open. Thank you